Ricoh JP8000 manual

JP8000 Operating I nstructions ZDCH040E-1.eps Read this manual carefully before you use this product and keep it handy for future reference. For safety, p lease follow the instructions i n this manual.[...]

JP8000 Operating Instructions RICOH COMPANY, LTD. 15-5, Min ami Aoya ma 1-chom e, Minato-k u, Tokyo 107-8544, Japan Phone: +81 -(0)3-3479-3 111 Overseas Affiliates U.S.A. RICO H CORPO RATI ON 5 Dedrick Place West Caldwell, New Jersey 07006 Phone: +1 -973-882-2000 The Ne therlands RICOH EU ROP E B.V. Groenelaan 3, 1186 AA, Amstelvee n Phone: +31-( 0[...]

Introduction This man ual conta ins deta iled inst ructio ns on the operation a nd ma intenanc e of this m achine. To get maximu m versa tility from this machi ne all opera tors should carefully read and follow the instru ctions in this man ual. Pleas e keep th is manu al in a ha ndy plac e near the machine . Plea se r ead th e Saf ety In for mati [...]

Note to users in the United States of America Notice: This equi pment has been tes ted and fou nd to c omply with the limi ts for a Cl ass B digi tal devic e, pursu- ant to Part 15 of the FCC Ru les. T hese limit s are designed to provid e reason able pr otection against harmful in terferen ce in a resid ential ins tallation . This equi pment gene [...]

i Safety Information When using yo ur equipm ent, the follow ing safety precautions sh ould always be followed. Safety D uring Oper ation In this manual, the following i mportant symbols are used: R WARNING: R WARNING: Indica tes a pot entially haza rdous situat ion w hich, if ins tructi ons are no t follo wed, c ould result in de ath or seriou s i[...]

ii R CAUTION: • Protect the equipment from damp ness or wet weather, such as rain, snow, and so on. • Unplug the power cord from the wall outle t before you move the equipmen t. While moving the equipment, you shou ld take care that the power cord will not be dam aged un der the e quipment. • When you d isconnect the p ower plug from the wall[...]

iii How to Read This Manual Symbols In this manual, the following sy mbols are used: R WARNING: This symb ol indicates a potenti ally hazar dous situation tha t might resu lt in death or serious injury when you misuse the machi ne without following the in- structions under this symbol. Be sure to read the instructions , all of which are de- scribed[...]

iv Making Prints Before making prints using thi s ma- chine, you have to mak e a master by pres sing t he { Start } key. When you press the { Start } key, the m achi ne scans the original ima ge and makes a maste r. This procedu re describes how to ma ke basic prints. A Place your originals in one of the following two w ays: Placing o rigin als on [...]

v To decr ease th e image density, press the {V V V V} key. ⇒ P.24 “ Ad- justing the Ima ge De nsity of Prints ” . D Enter the desi red numb er of prints with the number keys. E Press the { { { { Print } } } } key. When th e print job has finishe d, pres s t he { Clear Modes/Energy Sav- er } key. Previously entered job se t- tings wi ll b e c[...]

vi What You Can do with this Machine Below is a quick summary of this ma- chine's features an d where to look in this manual for more information. ❖ ❖ ❖ ❖ Standard Printing ⇒ P.19 “ Standard P rinting ” . ❖ ❖ ❖ ❖ Energy Saver Mode ⇒ P.22 “ Energy Saver Mode ” ❖ ❖ ❖ ❖ Adjusti ng the Pri nt Imag e Positi on ?[...]

vii ❖ ❖ ❖ ❖ Directional Magnif ication (%) ⇒ P.35 “ Dire ctional Magnif ication (%) ” . ❖ ❖ ❖ ❖ Directional Magnifi cation (Size) ⇒ P.37 “ Dire ctional Magnif ication (Size) ” . ❖ ❖ ❖ ❖ Erasing Center and Edge Margins ⇒ P.39 “ Erasing Center a nd Edge Mar gin s ” . ❖ ❖ ❖ ❖ Edge Erase ⇒ P.40 “ Ed[...]

viii ❖ ❖ ❖ ❖ Manual Class Mode with 2 or More Originals ⇒ P.57 “ Manual Class Mode with 2 or More Origin als ” . ❖ ❖ ❖ ❖ Class M ode ⇒ P.59 “ Class Mode ” . ❖ ❖ ❖ ❖ Combining Originals ⇒ P.61 “ Combin e Orig inal s ” . ❖ ❖ ❖ ❖ Auto Combine Mod e ⇒ P.66 “ Auto Combine Mode ” . ❖ ❖ ❖ ❖ S[...]

ix ❖ ❖ ❖ ❖ Merging Images ⇒ P.104 “ Image Overlay ” . ❖ ❖ ❖ ❖ Data St amp ⇒ P.107 “ Date Stamp ” . ❖ ❖ ❖ ❖ Page Stam p ⇒ P.109 “ Page Stamp ” . ❖ ❖ ❖ ❖ Stamp ⇒ P.112 “ Stamp ” . ❖ ❖ ❖ ❖ Memory Combine ⇒ P.114 “ Memory Comb ine ” . ❖ ❖ ❖ ❖ Orig ina l St ora ge ⇒ P.99 “[...]

x ❖ ❖ ❖ ❖ Stora ge Over lay ⇒ P.104 “ Image Overlay ” . GROVER0E ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE A[...]

xi TABLE OF CONTENTS Machine Exterior ....... .............. .............. ......... .............. .............. .............. .. 1 Machine Inter ior ............. ......... .............. .............. .............. ......... .............. .. 2 Options ................. .............. .............. .............. .......... .............. [...]

xii Printing onto Various Kinds of Pa per.......... .............. .............. .............. 41 Printing onto T hick Paper ............. ........ ..... ........ ........ ....... ........ ...... ....... ...... 41 Printing onto Standard Paper ......... ...... ....... ........ ........ ........ ........ ........ ........ 41 Printing onto Envel ope[...]

xiii Make-up Printing ............... .............. .......... .............. .............. .............. .... 93 Make-up Samples .............. .............. .............. .......... .............. .............. .... 96 Original Stora ge............. ......... .............. .............. .............. ......... .............. 99 Storing O[...]

xiv 4. User Tools Accessing the Us er Tools...... .............. .............. ......... .............. ............ 135 User Tools Menu.. .......... .............. .............. ......... .............. .............. ....... 137 1. System ..... ........ ........ ..... ........ ........ ..... ........ ........ ........ ..... ........ ........ ..[...]

xv When th e Mast er End Indica tor ( C ) Lights...... ......... .............. ............ 182 When th e Mast er Eject Indicator ( k ) Lights ............. .............. ............ 184 When Other Indicators are Lit ............. .............. ......... .............. ............ 185 When Pri nts are not Deli vered in a Nea t Stack ..........[...]

xvi[...]

1 Machine Ex terior 1. Front door Open to access the inside of the machine. 2. Flip up cover Flip up to access th e keys underneat h. 3. Operation panel ⇒ P.5 “ Operation Panel ” . 4. Master tray O p e n t h i s u n i t w h e n i n s t a l l i n g t h e m a s - ter. 5. Paper f eed tray do wn key Pre ss to lo wer t he Pa per fe ed tra y. 6. Pa[...]

2 Machine Inter ior 1. Main switch Use to tur n the power on or off. 2. Paper a lignmen t wings Lift or l ower the wing s depending on the type of pa per be ing u sed. 3. Paper de livery end p late This plate ali gns the leading edge of prints . 4. Paper delivery end plat e knob Use to move the end p late. 5. Paper delivery tray Comp leted pr ints [...]

3 9. Ink holder Set the ink c artri dge in thi s holder. 10. Drum unit lock lever B1 Lower t o unlo ck an d pull out th e drum unit. 11. Drum u nit The master is wrapp ed around t his unit . 12. Expo sure glass Position origin als here face down for printing . 13. Plat en cover or document feeder (option) Lower this cover o ver an origi nal on the [...]

4 Options ❖ ❖ ❖ ❖ Docume nt feeder 1. Document Feeder Note ❒ Other options : • Col or Dr ums: A3 , 11 " × 17" dru m • Col or Dr ums: A4 , 8 1 / 2 " × 11" drum • Key Counter • PC Controller • Twin color press roll er printing system TC-II ZDCH040E-3[...]

5 Operation Panel Keys 1. { { { { Quality St art } } } } key ⇒ P.74 “ Qu ality S tart Mo de ” . 2. { { { { Security } } } } key ⇒ P.73 “ Security Mode ” . 3. { { { { Skip Feed } } } } key Press to select sk ip feed pr inting. ⇒ P.68 “ Skip Fee d Printin g ” . 4. { { { { User Tools } } } } key Press to change the default settings t[...]

6 16. { { { { Class } } } } key Press to select All Class, Auto Class, Manual Class, or Class mode. ⇒ P.50 “ All Class Mode ” , ⇒ P.52 “ Auto Class Mode ” , ⇒ P.55 “ Manual Class Mode with One Ori gi- nal ” , ⇒ P.57 “ Manual Class Mode with 2 or More Orig inals ” , ⇒ P.59 “ Class Mode ” . 17. { { { {W W W W} } } } { { [...]

7 Indic ators 1. Special feature indicator Lights to indi cate that special featur es have been selected. To access the spe cial features, lift up t he cover on the left sid e of the ope ration panel. 2. Monitor indicators These indica tors light to inform yo u of the sta tus of th e machine. ⇒ P.16 5 “ If Your Machin e does not Op erate as Yo [...]

8 Panel Display The panel display shows the machine status , error messages, and function menus. 1. Items for the selected function. 2. These keys correspond to the se- lectable items shown above them on the panel d isplay. To select an item shown on th e panel displa y, press the key directly below it. 3. Machine statu s or messages. 4. Items whic[...]

9 Panel Displ ay Layout The basi c elements used on the pan el display are shown below. Understanding their meaning helps you use this mach ine's features quickly and eas ily. ❖ ❖ ❖ ❖ Samp le di splay w hen sel ect ing th e [ Original ] key 1. Machine statu s or message. 2. Available functions. 3. Illustrations of displays in this manu[...]

10[...]

11 1. Operation Print Paper The following limitations apply: Non -rec om men ded pap er: • Roughly cut paper • Paper of different thic kness in the same stac k • Envelopes heavier tha n 85g/m 2 , 22 lb. • Folded, curl ed, creased, or dama ged paper • Torn paper • Slippery p aper • Rough paper • Paper with any kind of coatin g (such [...]

Operation 12 1 • The following types of en velopes: If you print on r ough gr ained pap er, the copy imag e might be bl urred. You can us e A3 (297 × 420mm) or 11" × 17" originals or printing paper. When you want to print the entire image of an A3, 11" × 17" original, select Reduce mode beca use the maximu m pri nt are as a[...]

Originals 13 1 Originals The machine can detect the f ollowing original s izes placed on the exp osure glass: If the machine cannot d etect the original sizes properly, select the a rea to copy with the { Edge Erase } key. ⇒ P.40 “ Edge E rase ” . The machin e may not detect th e original size properly when: • Originals contain i ndex tabs.[...]

Operation 14 1 a = 8mm, 0.32" Origina l Print a[...]

Printing Preparations 15 1 Printing Preparations Loadin g Paper A Care full y open the pape r fee d tray. B Lift the paper feed side pl ates. Note ❒ When loading larger paper, slide out the extender. C Make sure that the paper feed side plates knob lock lever is raised (lock is relea sed), and then grasp the paper fee d side plates knob and adjus[...]

Operation 16 1 E Make sure that the paper feed side plates are touching both sides of the pape r, and then pu sh the lock lever for the side p lates down to lock the side p lates into posi tion. Important ❒ Alwa ys make sure th at you push the lo ck lever for the side plates down to lock the sid e plates i nto posit ion. Note ❒ Make sure th at [...]

Printing Preparations 17 1 When y ou u se stan dard paper (47.1 g/m 2 to 105 g/m 2 , 12 .5 lb to 28 lb) A Adjust the side plates to matc h the paper siz e scale on the end plate si de. C Lower or lift the p aper alignment wing s by turn ing the left and righ t kno bs. Note ❒ When the guides ar e up, you might not be able to l oad the unit to full[...]

Operation 18 1 Entering a User Code to Use the Machine If user codes are turne d on, operators must enter their use r code before they can use the machin e. The ma chine keeps count of the number of copies made under e ach user code. Note ❒ If you wa nt to us e this feat ure, you must turn it on and re gister the user codes with the user tools. Y[...]

Standard Printing 19 1 Standard Printing A Make sure that the mac hine is ready for prin ting. B If user codes are turned on, enter your user code with the number keys, and then press th e { { { { q q q q } } } } key. Reference ⇒ P.18 “ Enterin g a User Code to Use the Machine ” C Make sure that there are no previ- ous settings remaining. Not[...]

Operation 20 1 I Press the { { { { Proof } } } } key and chec k the image density and th e imag e position of the proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key. ⇒ P.23 “ Adjusting the Position of Printed Images ” . ❒ If the image density is slightly d a r k o r l i g h t , a d[...]

Standard Printing 21 1 Removing Pr ints A Pull the front paper d elivery side plat e down towa rds y ou to op en it. Note ❒ You cannot open the rear paper delivery side plate. B Remove the prints from the paper delivery tr ay and close the paper deliver y side p late.[...]

Operation 22 1 Energy Sa ver Mode If you do not operate the machine for a certa in period the machine can enter Quality Standby mode to remove ink from inside the ink drum. The machin e can then enter Energy Saver mode. You can pre ss the { Clear Modes/Ener gy Saver } key to cancel Energy Saver mod e and the mach ine returns to the ready con dition[...]

Adjusting the Position of Printed Images 23 1 Adjusting the Position of Printed Images Use the following proc edure to adj ust the position of print images as re- quired. *: Paper feed dir ection Limita tion ❒ For 308 mm, 12.2"-width paper, you can only adju st the pos ition of the pri nt ima ge 5 mm, 0.2" up or down. Note ❒ When the [...]

Operation 24 1 Adjusting the Image Density of Prints There are two ways to adjust the im- age density of prints: ❖ ❖ ❖ ❖ Before ma king a master Use the { Image D ensity } key. ❖ ❖ ❖ ❖ After making a master Use the {W W W W}{V V V V} (Speed) keys. Befo re M aking a Mas ter A Press the { { { { Image Densit y } } } } key to adjust the[...]

Tint Mode 25 1 Tint Mode Use this function to make halftone prints. A Press the [ Ori ginal ] key. B Select the [ Tint ] with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. C Press the { { { { Start } } } } key. GRTINT0E[...]

Operation 26 1 Changing the Printing Speed Use the {W W W W} or {V V V V} key to adj ust the printing speed. The relationship be- tween printing speed and print quali- ty depends on the t ype of paper you use. A Press the { { { {V V V V} } } } key to increase the speed and press the { { { {W W W W} } } } key to re- duce the speed . Note ❒ The fol[...]

Stopping a Multi-print Run 27 1 Stopping a Multi-print Run Stopping a Multi -print Run to Print A nother Or iginal A Press the { { { { Clear/ Stop } } } } key. B Set the original. C Enter the numb er of prints and press the { { { { Start } } } } key. Changing th e Number of Prints Ent ered and Checki ng Completed Prints A Press the { { { { Clear /S[...]

Operation 28 1 Reducing and Enlarging Using Preset Ratios Use this functi on to ha ve origi nals re- duced or enlarged by a preset ratio. A tota l of 7 r atio s are a vaila ble (3 en- largement ratios, 4 reduction ratios). Note ❒ The leading edge of the print im- age does not shift when a prin t im- age is made with this fu nction. 1. Place on th[...]

Reducing and Enlarging Using Preset Ratios 29 1 A Press the [ Ra tio ] key . B Select the desired ratio with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. C Press the [ OK ] key. D Make sure that the original and the print paper are the correc t size. E Place your original on t he expo- sure gl[...]

Operation 30 1 Auto Magnification Use this function to have the machine can choose an appropriate enlargement or redu ction r ati o bas ed on the siz e of your origi nal a nd the pape r size you s elec t. Note ❒ The range of ratios from which the m achine can select depends on where you place the original: • On the exposure glass : 50 – 200% [...]

Auto Magnification 31 1 ❖ ❖ ❖ ❖ Inch version *1 The machine automatically rotates t he origina l image by 90 ° to match the paper directio n and selects an appropriate reproduct ion ratio . ⇒ P.81 “ Image Rotation ” . *2 Set these orig inals in the optional doc ument feeder. ❒ Depending on the original type, a suitable reproduction[...]

Operation 32 1 E Press the { { { { Start } } } } key. F Check the image position of the trial or p roof print. Note ❒ If the imag e position is not correct, ad just it us ing the [ Image = = = = ] keys ( ⇒ P.23 “ Adjusting the Positio n of Printed Images ” ). G Make y our prin ts.[...]

Zoom 33 1 Zoom Use this function to fine-tune the re- produc tion ratio in 1% step s. Note ❒ The range in whic h you can select a ratio de pends on where you place the original: • On the exposur e glass: 50 – 200% A Press the [ Ra tio ] key . B Select [ Mag. ] with the [ → → → → ] or { { { { } } } } } key. Note ❒ To select a cu stom[...]

Operation 34 1 Using t he nu mber ke ys A Enter the ratio with the num- ber ke ys. B Press the { { { { q q q q } } } } key. G Press the [ OK ] key. H Make sure that the original and the print paper are the correc t size. I Place your original on t he expo- sure glass or in the optional docu- ment feeder. J Press the { { { { Start } } } } key. K Che[...]

Directional Magnification (%) 35 1 Directional Magnification (%) Use this function to choose different repr oducti on ratios for the ho rizont al and vertical directions. The result is a squeezing o r stretchi ng effect. Note ❒ The range in whic h you can select ratios depends on where you p lace the original: • On the exposure glass: 50 – 20[...]

Operation 36 1 G Press the [ OK ] key. H Make sure that the original and the print paper are the correc t size. I Place your original on t he expo- sure glass or in the optional docu- ment feeder. J Press the { { { { Start } } } } key. K Check the image position of the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adj[...]

Directional Magnification (Size) 37 1 Directional Magnification (Size) Use this functio n to have the machine select su itable reproduction ra tios based upon the dimens ions of the print you requ ire, and the size of the original you specify. 1. Horizontal original size 2. Vertical original size 3. Horizontal print size 4. Vertical print size Note[...]

Operation 38 1 F Enter the vertical original size with the number keys and press the { { { { q q q q } } } } key. Note ❒ To change the value entered, press t he { Clear/S top } key and enter the new value. ❒ Up to 999mm, 99.9" can be en- tere d. G Enter the vertical print size with the number keys, and then press the { { { { q q q q } } } [...]

Erasing Center and Edge Margins 39 1 Erasing Center and Edge Margins When printi ng from thick bo oks, or similar originals, the binding margin at the center and the edges might ap - pear on prints. To prevent this, per- form the following steps. Important ❒ Be sure to keep the platen cover at an angle of at least 25 degrees with the exposure gla[...]

Operation 40 1 Edge Erase This function erases all four margins of the original image. ❖ ❖ ❖ ❖ Using Edge Erase mode ❖ ❖ ❖ ❖ When not using Edge Eras e mode When printing from thick books, or similar originals, the binding margin at the cent er and the ed ges might appear on prints. The ma- chine era ses these ma rgins auto- matical[...]

Printing onto Various Kinds of Paper 41 1 Printing onto Various Kinds of P aper Before printing onto thick pape r, thin paper, envelopes or special kinds of paper loa ded in the pa per fee d tra y, you mus t select the paper t ype. Printing ont o Thick Paper If you wish to print onto thick (128 to 209.3g/m 2 , 3 4 to 55.6 lb or he avier) paper, pe [...]

Operation 42 1 B Select [ Special ] with the [ → → → → ] or { { { { } } } } } } } } key. C Press the [ OK ] key. D Place the envelopes in the paper feed tray as shown in the illustra- tion. *. Paper feed direction Note ❒ When you use envelopes , the paper feed tr ay capac ity is about 150 sheets (85g/m 2 , 22 lb) or en ough to loa d a st [...]

Printing onto Various Kinds of Paper 43 1 - - - - To prevent paper misfeeds: If paper misfeeds occur frequently, even if you se lect a sui table pa per type, follow the steps below. A Press the [ S elect ] key. B Select th e type of pa per misfe ed and frequency with the { ~ } , { } } , { | } , or { { } keys. C Press the [ OK ] key. If paper misf e[...]

Operation 44 1 Selecting Original Modes Select one of the following five modes to matc h you r originals : ❖ ❖ ❖ ❖ Letter mode Select when origi nals contain only letters (no pictures). ❖ ❖ ❖ ❖ Letter/Photo mode Select when originals contain pho- togra phs or p ictu res wi th let ters. ❖ ❖ ❖ ❖ Photo mode Select when original[...]

Selecting Original Modes 45 1 D Adjust the contrast with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ Use " High" to p roduce a clear print of peop le's faces. ❒ Use "Lo w" to p roduce a clear prints of lan dscape s and scen- ery etc. E Press the [ OK ] key.[...]

Operation 46 1 B Adjust the contrast with the [ ← ← ← ← ][ → → → → ] or { { { { ~ ~ ~ ~ } } } }{ { { { } } } } } } } } keys. C Press the [ OK ] key. Note ❒ Use "Hi gh" to produce a cl ear print of peop le's faces. ❒ Use "Low" to produce a cl ear prints of lands capes and scenery etc. D Select the dot pat[...]

Selecting Original Modes 47 1 Pencil Mo de Print ing Note ❒ Ori g ina ls w ri tte n in pen c il sh ou ld be placed on the ex posure glass. A Press the [ Ori ginal ] key. B Select [ Pencil ] w ith the [ → → → → ] or { { { { } } } } } } } } key. C Press the [ OK ] key. D Place your original on t he expo- sure glass . E Press the { { { { Sta[...]

Operation 48 1 Economy Mode W h e n y o u w a n t t o s a v e i n k , s e l e c t Econ omy mo de. Note ❒ Prints will be lighter in th is mode. A Press the { { { { Economy Mode } } } } key. B Place your original on t he expo- sure glass or in the optional docu- ment feeder. C Press the { { { { Start } } } } key. D Check the image position of the t[...]

Auto Cycle 49 1 Auto Cycle Use the { Au to Cy cle } ke y to process masters and ma ke prints in a single operation. Note ❒ When you use the optional docu- ment feeder, it is not necessary to place originals one by one. All originals are fe d and p rints are completed after you press the { Sta rt } key. A Place your original on t he expo- sure gla[...]

Operation 50 1 All Class Mode Preparation You have to store the number of students in eac h class with the user tools. ⇒ P.151 “ 3-5 Class En ter No. ” Use the { Class } key to make sets of prints from th e same original. All the stored numbers of prints are made for each set. This feature is useful for te achers who frequently make multiple [...]

All Class Mode 51 1 E Press the { { { { Start } } } } key. F Check the image position of the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key ( ⇒ P.23 “ Adjusting the Position of Printed Images ” ). G Make y our prin ts.[...]

Operation 52 1 Auto Class Mode Preparation You have to store the number of students in eac h class with the user tools. ⇒ P.151 “ 3-5 Class Enter No. ” . Use the { Class } key to make sets of prints from the same o riginal. The stored numbers of prints are made for each set. This feature is useful for te achers who frequently make multiple pr[...]

Auto Class Mode 53 1 Selecting classes wit h the { ~ } , { } } , { | } , or { { } key A Select t he desir ed clas s for th e 1 st grade with the { { { { } } } } } } } } key. The numbe r of stud ents is di s- played on the counter. Note ❒ When you want to select all the clas ses, sele ct [ ALL ] . B Press the [ Se lec t ] key. Note ❒ Repeat st e[...]

Operation 54 1 F Place one original on the expo- sure glass or in the optional docu- ment feeder. G Press the { { { { Start } } } } key. H Check the image position of the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key ( ⇒ P.23 “ Adjusting the Position of Printed Images ”[...]

Manual Class Mode with One Original 55 1 Manual Class Mode w ith One Original Use the { Class } key to make sets of prints fr om the same or iginal. V ari- ous number s of prints ar e made for each set. Note ❒ When y ou set the M anual Class mode, Job Separ ation mode is au- tomatically tu rned on . The jo b sep- arator pul ls the top she et of e[...]

Operation 56 1 F Enter the desi red numb er of prints for the second set with the number ke ys. G Press the { { { { q q q q } } } } key. Note ❒ Repeat steps F and G for each set. ❒ The max imum nu mber o f sets that can be made is 20. H Press the [ OK ] key. I Place one original on the expo- sure glass or in the optional docu- ment feeder. J Pr[...]

Manual Class Mode with 2 or More Originals 57 1 Manual Class Mode with 2 or More Originals Preparation To use this function, you have to select “ by each original ” with the “ Class Manual Set ” s etting in the user tools. Se e “ Class Manua l Set ” ⇒ P.142 “ 4. Mode Setting ” . Use the { Class } key to make sets of prints from di[...]

Operation 58 1 F Enter the desi red numb er of prints for the se cond original with the number k eys. G Press the { { { { q q q q } } } } key. Note ❒ Repeat steps F and G for each ori gina l. ❒ Up to 20 classes can be set. H Press the [ OK ] key. I Place the first original face down on the exposure glass. J Press the { { { { Start } } } } key. [...]

Class Mode 59 1 Class Mode Use the { Class } key to make sets of prints from the same o riginal. The s a m e n u m b e rs o f p r i nt s a re ma de fo r each set. Note ❒ When you choose Class mode, Job Separation mod e is automatically turned on. The job se parator pull s the top sheet of each set delivered to the paper delivery tray to mark the [...]

Operation 60 1 F With the nu mber keys, enter the nu mb e r of se ts yo u w is h to m ak e. Note ❒ Up to 99 sets c an be se lected for an original. G Press the [ OK ] key. H Place one original on the expo- sure glass or in the optional docu- ment feeder. I Press the { { { { Start } } } } key. J Check the image position is the trial or proof pr in[...]

Combine Originals 61 1 Combine Originals You can combine original s in two ways: ❖ ❖ ❖ ❖ 2 single-sided original s → → → → 1 si ngle-sided print wi th 2 images Combine two single-sided originals onto one single-sided print with the two images placed side-by-side. ❖ ❖ ❖ ❖ 2 single-sided original s → → → → 1 si ngle-si[...]

Operation 62 1 ❖ ❖ ❖ ❖ Metr ic version ❖ ❖ ❖ ❖ Inch version ❒ The following tables list the combinations that can be used with the Combine feature (2 single-sided originals → 1 single-sided pri nt with 4 images). ❖ ❖ ❖ ❖ Metr ic version ❖ ❖ ❖ ❖ Inch version Original Size A4 K B5 K A5 K B6 K A6 K Pape r Size A3 L [...]

Combine Originals 63 1 ❒ If a suitable reproduction ratio is n ot selected, images m ight not co mpletely appear on prints. ❒ Originals reading from left to right. Reference When you use the optional document feeder with this function, ⇒ P.125 “ Combine Printing with the Document Feeder ” . A Place the first original face down. Note ❒ W[...]

Operation 64 1 C Check the print paper size and the reproduction ratio. Note ❒ To have the machine choose a suitable ratio automatically, use Auto Mag- nification mode. ⇒ P.30 “ Auto Magnification ” . D Press the { { { { Combine } } } } key. E Select [ Combin e 2 ] or [ Quadruple ] with the [ ← ← ← ← ] [ → → → → ] or { { { {[...]

Combine Originals 65 1 H The beeper s ounds after the first original has b een stored. Pla ce the second original face down. I Press the { { { { Start } } } } key. J Check the image position of the trial or p roof print. Note ❒ If the image position is not correct, adjust it using the [ Image = = = = ] key ( ⇒ P.23 “ Adjusting the Positio n o[...]

Operation 66 1 Auto Combine Mode Preparation To use this function, you have to sele ct Auto Comb ine mod e with the us er to ols. See “ Comb ine ” ⇒ P.142 “ 4. Mode Setting ” . You can have images duplicated in two ways : ❖ ❖ ❖ ❖ 1 single-sided original → → → → 1 singl e-sid- ed print of 2 ima ges The original image is dup[...]

Auto Combine Mode 67 1 F Press the [ OK ] key. G Press the { { { { Start } } } } key. H Check the image position of the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key ( ⇒ P.23 “ Adjusting the Position of Printed Images ” ). I Make y our prin ts.[...]

Operation 68 1 Skip Feed Printing You can increa se the tim e betw een prints using the { Skip Feed } key. By default, when one shee t of paper is fed, the drum rotates twice. Ho wever, you can se lect the number o f drum ro- tations. This gives you a chan ce to re- move prints one by one from the paper delivery tray or insert one sheet of paper be[...]

Skip Feed Printing 69 1 F Check the image position of the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key ( ⇒ P.23 “ Adjusting the Position of Printed Images ” ). G Make y our prin ts. Note ❒ After printing is completed, the Skip Feed setting return s to de- fault.[...]

Operation 70 1 Progra ms You can store up to 9 fre quently used print job settings in machine mem ory and recall them for future use. Note ❒ Stored programs are not cleared when you tu rn off the main s witch. ❒ Stored programs can not be delet- ed. If you wa nt to change a sto red program, overwrite it. Storing a Pro gram A Set the print setti[...]

Programs 71 1 Protecti ng a Progra m If you want to prevent someone from writing over your program, do the following: A Press the { { { { Program } } } } key. B Select [ Prote ct ] with the [ → → → → ] or { { { { } } } } } } } } key. C Press the [ OK ] key. D Select the program number you want to pr otect w ith the [ ← ← ← ← ] [ →[...]

Operation 72 1 Note ❒ Alread y protec ted progr am numbers are shown with a black background (e.g. A ). ❒ You can also select the p rogram number with the number keys. E Press the [ Ca ncel ] key. F Press the [ OK ] key. Recallin g a Program A Press the { { { { Program } } } } key. B Make su re th at [ Re call ] is se lected. C Press the [ OK ][...]

Security Mode 73 1 Security Mode This funct ion prev ents other s from making prints of confidential docu- ments from the master. For example, if you want to print some document s with sensitive information, use this function after making your prints so that nobody can access that master again. A Make y our prin ts. B Press the { { { { Securit y } [...]

Operation 74 1 Quality Start Mode If the machine is not u sed f or a lo ng period of tim e or you chang e the color drum unit, the ink on the dr um m ight dry causing prin t quality to deterio- rate. To solve this problem, you can ha ve t he m ach in e ca rry ou t a fe w id le spins of the dru m before a print run. This will restore image quality a[...]

Quality Start Mode 75 1 Using Qualit y Start Manuall y A Press the { { { { Qua lit y Star t } } } } key. B Place your original on t he expo- sure glass or in the optional docu- ment feeder. C Press the { { { { Start } } } } key. The drum uni t idles. D Make y our prin ts. Skip Feed Edge Erase Over la y Make-Up Stamp Image Density Lighter Darker 2 D[...]

Operation 76 1 Job Separation The print on the top of each print set in the paper delivery tray is pulled by the job separator. This function is useful when you make 2 or more print sets. R CAUTION: Limita tion ❒ In Job Separation mode, the following limitations apply: ❖ ❖ ❖ ❖ Metr ic version ❖ ❖ ❖ ❖ Inch version Note ❒ When y o[...]

Job Separation 77 1 A Press the { { { { Job Separator } } } } key. B Make y our prin ts. Note ❒ After the last page of each print set is fed ou t to the paper delivery tray, the job separator pulls the last sheet of each group in Job Separation mode. The next Job separation begins. Skip Feed Edge Erase Over la y Make-Up Stamp Image Density Lighte[...]

Operation 78 1 Conserving the Master The machin e automatically ch anges the master len gth depending on the paper size you us e. Thi s sa ves bot h mast er a nd in k. a = Images on the master b = Masters c = Area that y ou can sav e master a nd ink Limita tion ❒ The optional document feeder is required. Note ❒ This functi on is turned on when [...]

On Line Printing 79 1 On Line Printing On Line printing allows you to u se this machine as a PC printer. Limita tion ❒ The optional PC controller is re- quired. Note ❒ Before printing on to A5 K , 5 1 / 2 " × 8 1 / 2 " K , or non-standard size pa- per, you need to select the paper size with the [ Ppr.Type ] key. ❒ When pr inti ng o[...]

Operation 80 1 When p rint ing ont o stan dard paper size s or sizes oth er than A5 K , 5 1 / 2 " × 8 1 / 2 " K A Refer to the PC controller man- ual. Auto On Line You can sele ct wh eth er t he m ach ine auto mati call y switch es to On Line m o d e w h e n i t r e c e i v e s d a t a f r o m a PC. Preparation • The default settin g f[...]

Image Rotation 81 1 Image Rotation When your orig inal setting directi on is different from the p aper direction, the machine automatically rotates the original image by 90 ° to ma tch the paper di- rection. Note ❒ The following tables list the combinations that can be used in Image Rotation mode. ❖ ❖ ❖ ❖ Metric vers ion ★ : The machin[...]

Operation 82 1 Make-up Printing Features M a k e - u p m o d e e n a b l e s y o u t o d o m o r e t h a n j u s t m a k e a n e x a c t c o p y o f t h e o r i g - inal. A variety of editing and image processing fu nctions allow you to q uickly and easily customize your prints. Main Feat ures Command sheets allow you to cr eate special effects wit[...]

Make-up Printing Features 83 1 5. P./N. mode (Positive Neg- ativ e mode ) 6. Solid mode (Image Pattern mode) 7. All Page Patter n mode (Area Patter n mode) 8. All + Outline (Image Out- line and Area Pat tern mode) Mode Sample Design ated A rea Com mand sh eet/Or igi nal (Closed ar ea meth od) Prin t BALLET BALLET BALLET BALLET LUNCH MENU LUNCH MENU[...]

Operation 84 1 Make-up Modes fo r Outsid e Designated Areas Note ❒ In Mak e-up mode, comma nds mus t be giv en f or bot h desi gnate d are as an d areas outside the designated areas . Mode Sample Undesi gnated Area Comm and sh eet/Or igina l Print 1. Letter mode: The area out- side de signa ted are as is printed in L etter mode. 2. Photo mode: Th[...]

Make-up Printing Features 85 1 Background Pat terns A total of 164 background patterns is avai lable in Make-up mode: • 40 basic patter ns • 40 patterns similar to the basic patterns but with patterns el ements at 4 times the size. • 90 ° rotations of all the basic and enlar ged patterns. • 4 registered user patte rns. *. Paper Feed Direct[...]

Operation 86 1 Command Sheets for Make-Up Printing Command sheets are fed first so that the machine can recognize the areas of the original which are to be edited as designated areas. Command Sheets The command sheet is a sheet of paper for desi gnating areas to be edited. Com- mand sheets must be made on white or translucent paper , and should be [...]

Command Sheets for Make-Up Printing 87 1 • There is no limit to the number o f areas you can designate on a single com- mand sheet. • If designated areas on tw o or more command sheets overlap, th e last com- mand sheet will apply for the overlapping portion. • If you use Outline mode for letter im ages with a thickness of less than 3mm, 0.12[...]

Operation 88 1 - - - - Notes The image might differ dependi ng on how the designated area is drawn, so re- member the following when making the command sheet: Design at ed area Area r ecogni zed Preferr ed de signat ed are a Part of t he de signa ted area is surrounde d by 3 sides of the e n- tir e are a. Make a spa ce of at leas t 2m m, 0.08"[...]

Command Sheets for Make-Up Printing 89 1 Diagonal line method Note ❒ A diagonal line must be drawn through the area th at you wish to edit. A Put the command sheet on top of the original. B Draw a line using a felt tip pen (black, red or blu e) with a thickness of at least 1mm. Note ❒ Make sure there is no break in the li ne. ❒ The diagonal l[...]

Operation 90 1 ❒ The line marking the designated ar ea should be more than 2mm, 0.08", from any neighboring image. a, b, c = 2mm, 0.08" Closed ar ea method Note ❒ The line designa ting the area must be a clos ed loop. A Put the command sheet on top of the original. B Using a bl ack, red, or bl ue felt tip pen, draw a line around the a[...]

Command Sheets for Make-Up Printing 91 1 Note ❒ Make sure there is no break in the li ne. ❒ Draw the line at least 2mm, 0.08", away from the image so that the whole image can be recognized. a = Line marking the de signated area b = 2mm, 0.08" c = Imag e with in the d esi gn ate d ar ea ❒ The line marking the designated ar ea should [...]

Operation 92 1 Command Sheet s and Fi nished Prints The following illu strations will help you understand how to dr aw a command sheet . ❖ ❖ ❖ ❖ Drawing a command sheet using a diagonal line The diagonal line method is easy to use for designating rectangular areas. It is also more precise, but it is difficult to us e for designating complex[...]

Make-up Printing 93 1 Make-up Printing A Press the { { { { Make-U p } } } } key. B Make s ure tha t [ 1 ] is se lected. Then press t he [ OK ] key. C Select the frame shape with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. D Press the [ OK ] key. E Select the mode for the first com- mand shee [...]

Operation 94 1 I Press the [ OK ] key. Note ❒ Follow steps B – I for the other command sheets. ❒ You c an select a p attern regis- tered with th e user tools for only one co mmand sheet. ❒ To change the value entered, press t he { Clear/S top } key and enter the new value. J After yo u have finis hed des ignat- ing modes for all the command[...]

Make-up Printing 95 1 O Place the first command sheet face down on the exposu re glass and press the { { { { Start } } } } key. The beep er sounds after the com- mand sheet is scanned. Note ❒ Repeat step O for the other com- mand sheet s. P Place the original face down on the exposure glass or face up into the document feeder and press the { { { [...]

Operation 96 1 Make-up Samples - - - - Sample 1 A Command Sheet No. 1, Frame shape , Designated area: Delete Area mode B Outsid e area : Letter m ode C Print 1. Original 2. Command sheet No.1 3. Print 1 2 3 ZM-50[...]

Make-up Samples 97 1 - - - - Sample 2 A Command Sheet No. 1, Frame shape/, Designated area: All + Outline No. 30 B Command Sheet No. 2 Frame shape , Designated area: All page pattern No. 17 C Outs ide are a: F n1 D Print 1. Original 2. Command sheet No.1 3. Command sheet No.2 4. Print 1 2 3 4 ZM-51[...]

Operation 98 1 - - - - Sample 3 A Print the original as it is B Change the drum unit for color printing C Command Sheet No. 1, Frame shape , Desi gnated area: All page pattern No. 3 9 D Outsid e area : Letter m ode E Print 1. Original 2. Command sheet No.1 3. Print 1 2 3 ZM-52[...]

Original Storage 99 1 Original Storage You can s tore freq uently used origi- nals in machine memory and then easily recall them later to make prints whenever they are need ed. Preparation • You can sto re up to 8 Original Storag e setting s in m achine memor y. • The number of Original Storage settings you can store de pends on the type of ori[...]

Operation 100 1 D Select t he desired nu mber to stor e with the [ ← ← ← ← ][ → → → → ] or { { { { ~ ~ ~ ~ } } } }{ { { { } } } } } } } } keys. E Place the origina l on the expos ure glass as shown, then press the { { { { Sta rt } } } } key. Note ❒ If print images for an original have already been stored in ma- chine memory, check[...]

Original Storage 101 1 Selectin g Stored Origi nal To select the images of originals that have been stored in machi ne memo- ry, do the following: A Press the { { { { Original Storage } } } } key. B Select [ Se lect ] with the [ ← ← ← ← ][ → → → → ] or { { { { ~ ~ ~ ~ } } } }{ { { { } } } } } } } } keys. C Press the [ OK ] key. D Se[...]

Operation 102 1 Removing Origina l Protection A Press the { { { { Original Storage } } } } key. B Select [ Prote ct ] with the [ → → → → ] or { { { { } } } } } } } } key. C Press the [ OK ] key. D Press the [ Ca ncel ] key. Deleti ng Stor ed Ori ginal I f y o u w a n t t o d e l e t e t h e i m a g e s o f originals stored in machine memory[...]

Original Storage 103 1 D Select the [ Yes ] or [ No ] key. Note ❒ Press the [ No ] key if you do not wish to d elete the Stored Origi- nal. TPES580E[...]

Operation 104 1 Image Overlay Th e ma chi ne c an m erg e two di ffer en t originals onto the same print paper. Two types of merging are available : ❖ ❖ ❖ ❖ Overlay Two different originals are merged onto the s ame pr int pape r. ❖ ❖ ❖ ❖ Format The image of the original whi ch is copied first will b ecome the back- ground image for [...]

Image Overlay 105 1 C Press the [ OK ] key. Note ❒ If the one of original storage is already chosen, the display in step C does not show n. Skip to step D . D Press the [ OK ] key. E Place your originals, and the n press the { { { { Start } } } } key. On Line overla y A Press the { { { { On Line } } } } key. B Press the { { { { Overlay } } } } ke[...]

Operation 106 1 D Place your originals, and the n press the { { { { Start } } } } key. Placing o rigin als on the exposure glass A Place the first original on the exposure glass. B Press the { { { { Sta rt } } } } key. Note ❒ When you s elect [ Format ] in step B , the orig inal for t he template should be placed fir st. ❒ To cha nge th e back [...]

Date Stamp 107 1 Date Stamp Use this function to have the date stamped on print s. Preparation Before you use this function, yo u have to set the machine's internal clock with t he user tools. ⇒ P.150 “ 1-6 Time Setting ” . Limita tion ❒ The font size of the date cannot be chang ed. ❒ I f y ou s e l e c t P ag e S t a m p a n d D a t[...]

Operation 108 1 A Press the { { { { Stam p } } } } key. B Make su re t hat [ Dat e ] is selected. C Press the [ OK ] key. D Select the desired p osition and di- rection w ith the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { } } keys. E Press the [ OK ] key. F Select the [ Yes ] or [ No ] key. Note ❒ Press the [ Ye s ] key [...]

Page Stamp 109 1 Page Stamp Use this function to have page num- bers stamped on prints. Thre e numberin g forma ts are av ail- able: • P1, P2,....., P5 • 1/5, 2/5,....., 5/5 • -1-, -2-,....., -3- Limita tion ❒ The size and font of Page Stamp cannot be changed. ❒ I f y ou s e l e c t P ag e S t a m p a n d D a t e Stamp togethe r, the last[...]

Operation 110 1 E Press the [ OK ] key. If you selected [P1,P2 ] or [-1-,-2-] A Enter the first page n umber with th e [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ You can als o ente r the pa ge number with the numb er keys. ❒ To change the value entered, press the { Clear/ Stop } key a[...]

Page Stamp 111 1 I Place your original, an d then press the { { { { Start } } } } key. Placing you r origina ls ( K ) on the exposure gl ass A Place the first original a s shown in the illustration. Note ❒ Repeat s tep I for the other originals. Placing yo ur origin als ( K ) in the optiona l documen t feeder A Place your originals as sh own in t[...]

Operation 112 1 Stamp One of the following 3 messages can be stamped o n prints. CONFIDENTIAL PRIORITY PRELIM INAR Y Limita tion ❒ Onl y on e me ssa ge c an b e st am ped at a time. Note ❒ You can ch ange some Stamp set- tings (size, density, or position) with the user to ols. See “ Size ” , “ Stamp Densi ty ” , “ Stamp P osi- tion ?[...]

Stamp 113 1 H Select the stamp position with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. I Press the [ OK ] key. J Select the [ Yes ] or [ No ] key. Note ❒ Press the [ Ye s ] key if you w ish to s et th e oth er Sta mp modes . K Place your original and p ress the { { { { Sta rt } } } } key.[...]

Operation 114 1 Memory Combine You can combine original s in four ways: ❖ ❖ ❖ ❖ 4 single-sided original s → → → → 1 si ngle-si ded p rint of 4 image s 4 one-sided pages are p rinted onto 1 one-si ded sheet, 4 original images on one side. ❖ ❖ ❖ ❖ 8 single-sided original s → → → → 1 si ngle-si ded p rint of 8 image s 8[...]

Memory Combine 115 1 Combining Several Si ngle – s ide d Ori gin als on to on e Sing le – sided Print ❖ ❖ ❖ ❖ 4 single-sided original s → → → → 1 si ngle-si ded p rint of 4 image s ❖ ❖ ❖ ❖ 8 single-sided original s → → → → 1 si ngle-si ded p rint of 8 image s ❖ ❖ ❖ ❖ 16 singl e-side d orig inals → → ?[...]

Operation 116 1 Limita tion ❒ To use “ 16 one-sided originals → 1 one-sided print of 16 images ” mode, the optional document feeder is requ ired. ❒ If the calcu lated ratio is u nder the minim um ratio, it is corrected w ithin the range of the ratio automatically. However, with some ratios, parts of the im- age might not be cop ied. ❒ T[...]

Memory Combine 117 1 ❖ ❖ ❖ ❖ Placing originals on the ex posure glass (metric version) *1 You can use these original and pap er sizes in Combine 4, 8 Origin als mode. *2 You can use these original and paper sizes in Combine 4 Origi nals mode. ❖ ❖ ❖ ❖ Placing originals on the ex posure glass (inch v ersion) *1 You can use these origi[...]

Operation 118 1 C Press the [ OK ] key. D Selec t your des ired mo de. E Press the [ OK ] key. F Place your originals. Placing yo ur origi nal ( K ) on the exp osure glas s A Place your original as shown in the illustration. Placing yo ur origin als ( K ) i n the opt iona l docum ent feed er A Place your originals as show n in the illustration. Not[...]

Memory Combine 119 1 G Press the { { { { Start } } } } key. Note ❒ Even if the number of originals is less than the number required in the se- lected mode, prints can be made as shown in the illustration. In this case, press the { q } key after a ll the originals have been scanned. ❒ When placing an original on the expos ure glass or one sheet [...]

Operation 120 1 ❖ ❖ ❖ ❖ Example: copying A4 L L L L originals onto A3 L L L L paper. ❖ ❖ ❖ ❖ Example: copying A5 L L L L originals placed in the optional document feeder ont o A3 L L L L paper. ❖ ❖ ❖ ❖ Example: copying 8 1 / 2 " × × × × 11" K K K K originals onto 11" × × × × 17" L L L L pap er. ?[...]

Memory Combine 121 1 A Press the { { { { Combine } } } } key. B Select [ Memory C ombine ] with the [ → → → → ] or { { { { } } } } } } } } key. C Press the [ OK ] key. D Select [ Repeat ] with the [ → → → → ] or { { { { } } } } } } } } key. E Press the [ OK ] key. F Select the reproduction ratio. Reference ⇒ P.28 “ Reducing and [...]

Operation 122 1 G Set your origin al. Placing yo ur origi nal ( K ) on the exp osure glas s A Place your original as shown in the illustration. Placing yo ur origin als ( K ) i n the opt iona l docum ent feed er A Place your originals as show n in the illustration. H Press the { { { { Start } } } } key. ZDCH110E ZDCH120E[...]

123 2. Optional Functions Optional Document Feeder Insert a stack of origi nals in the docu- ment feeder. It will be fed automati- call y. Origina ls Placing the following originals in the document feeder m ight cause mis- feeds or damage to the originals. Place the following kin ds of originals on the exposure glass: • Originals he avier than 1 [...]

Optional Functions 124 2 The first 8mm, 0.32" , of the leading edge and the last 2mm, 0 .08" of the trailing edge cannot be printed. Make sure the leading edge margin is at least 8mm, 0.32", and the trailing edge margin is at least 2mm, 0.08". Do not stack originals above the limit mar k. Placing Origi nals in the Document Fe ed[...]

Optional Document Feeder 125 2 Combine Print ing with the Document Fe eder Reference ⇒ P.61 “ Combine O riginals ” for de- tails. A Inse rt the 2 ori gina ls fac e up. Note ❒ The first original will be printed on the left side of the paper. B Enter the number of prints with the number keys. C Check the print pap er size and the reproduc tio[...]

Optional Functions 126 2 H Check the image position of the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key ( ⇒ P.23 “ Adjusting the Position of Printed Images ” ). ❒ After the first origin al has been stored, the s econd origina l is fed. ❒ If you place on ly one orig[...]

Optional Document Feeder 127 2 G Press the { { { { q q q q } } } } key. Note ❒ Repeat steps F and G for each ori gina l. ❒ Up to 20 classes can be set. H Press the [ OK ] key. I Place your originals fac e up in the document feeder. Note ❒ The originals are fed from the top of th e stack. Mak e sure that the originals are placed in the correct[...]

Optional Functions 128 2 Color Printing Using the Optional Color Drum Col or dr um u nit s are av ai lab le as op- tions in addition to the standard black unit. For mak ing color print s, a sepa- rate drum unit is necessary for eac h color. Note ❒ If the ink on the color drum dries, use the Quality Start mode. ⇒ P.74 “ Quality Start Mode ” [...]

Color Printing Using the Optional Color Drum 129 2 C Pull the drum unit hand le out slowly (B2). D Lift the upper dr um stay (B3) a lit- tle to un lock th e drum unit, and then pull out the drum unit while holding the drum unit h andle (B2) and the upper drum stay (B3). Important ❒ Be careful not to let the drum unit fall. E Make sure the optiona[...]

Optional Functions 130 2 J Close the front door. Note ❒ Make sure th at the Open Cover / Unit indicator turns off, and the Colo r Dr um in dicator turns on. Printi ng in Two Colo rs After p rinting in one color, you can print i n anoth er color on th e same side of the print. Note ❒ Let the ink on the prints d ry for a while before printing on [...]

Color Printing Using the Optional Color Drum 131 2 F Remove the prints from the paper deli ver y tray an d plac e the m on the pa per feed t ray again as shown in the illustration. G Change the drum uni t. ⇒ ⇒ ⇒ ⇒ P.128 “Changin g the Color Drum Unit” . H Place the seco nd original and press the { { { { Start } } } } key. I Check the im[...]

Optional Functions 132 2 Changing the Drum Size To save costs on mast er rolls and ink, you can sh orten the length of each master by changing to an optional smaller drum. Printi ng Area (At 23 ° ° ° ° C/73 ° ° ° ° F, 65% RH) ❖ ❖ ❖ ❖ Metric vers ion ❖ ❖ ❖ ❖ Inch version Master Cu t Length A3 drum … 320mm × 530mm , 12.5&qu[...]

133 3. Combination Chart Combination Chart This com bination chart shows whi ch modes can be used to gether. ✩ means that t hese modes can be used together. X means that th ese modes cannot be us ed together. *1 means that t hese modes cannot be used together (the function chosen se c- ond takes priority) *2 means that t hese modes cannot be used[...]

Combination Chart 134 3 Func tion sp ecifi ed ear lie Memo ry Co mbine mod e (8 Original s) ✩✩✩✩✩✩✩✩ *1 *1 *1 -- * 1 ✩✩✩✩✩✩ *2 *2 *2 *2 *2 *2 *1 *2 *2 ✩ *1 Memo ry Co mbine mode (1 6 Origi- nals) ✩✩✩✩✩✩✩✩ *1 *1 *1 *1 -- ✩✩ ✩✩✩✩ *2 *2 *2 *2 *2 *2 *1 *2 *2 ✩ *1 Edge Er ase ✩✩✩✩✩✩[...]

135 4. User Tools Accessing the User To ols The user tools allow you to customize various default settings. This section is intended for the machi ne adminis- trator. A Press the { { { { User Tools } } } } key. B Select the desir ed user tool s menu. ⇒ ⇒ ⇒ ⇒ P.137 “ User Tools Men u ” . Usin g the { ~ } , { } } , { | } , or { { } key A [...]

User Tools 136 4 C Change the setting s by following the instructions on the panel d is- play, and then pres s the [ OK ] key. Note ❒ To change the value entered, press the { Clea r/Stop } key before pressing the [ OK ] ke y. Th en en- ter the new value. ❒ [ Cancel ] : Press to return to th e prev ious me nu wit hout ch ang- ing any data. D Pre[...]

User Tools Menu 137 4 User Tools Menu Reference For acce ssing the user t ools, ⇒ P.135 “ Accessing the User Too ls ” . 1. Syste m No. Mode Description 1 Auto Reset The machine returns to its initial condition automatically after your job is finished. The automatic reset time can be s et from 1 to 5 mi nute s or of f (0 minut e). Note ❒ Def[...]

User Tools 138 4 7 Data Print Use to print ou t the following data. Note ❒ Avai lable sett ings: • Log Data (Number of prints ma de, how many times paper misf eeds occ ur and so on.) • Reset Counters (Number of prints and master made under ea ch use r cod e.) • Store Class (Regis tered number of students in each class.) 8 Energy Saving Y ou[...]

User Tools Menu 139 4 2. Set Operat'n Mo de No. Mode Description 1 Min. Quantity The minimum pr int quantity can be set between 0 and 9999. Example: If you speci fy 20 as minim um number of prints, runs of 20 or more prints will be accepted, print runs of less than 20 prints will not be accepted. Note ❒ Default: 0 2 Max. Quantity The maxi mu[...]

User Tools 140 4 3. Init ial Settin g No. Mode Description 1 Paper Type Specifies the paper type a t power on. Note ❒ Defa ult: Std. (Standard) 2 MSTR Makg. Dens it y Specifies the image density a t power on. Note ❒ Defa ult: Std. (Standard) 3 Original Priority Specifies the original mode at power on. Note ❒ Defa ult: Letter 4R e p r o d u c [...]

User Tools Menu 141 4 8 Photo Contras t Specifies the contrast level for Photo when th e power is switched on or after mode se ttings are clea red. Note ❒ Defa ult: Standard 9 Photo(Screen) Specifies the screen image in P hoto mode when you press the [ Original ] key. Note ❒ Defa ult: Standard 10 Eco. Mode ON / OFF Specifies whether Economy Mod[...]

User Tools 142 4 4. Mode Set ting No. Mode Descripti on 1A u t o C y c l e O N / OFF Specifies whether Auto Cycle mode is selected at power on. Note ❒ Default: ON 2 Class Manual Set You can use one original or multiple originals in Manual Class mode. Note ❒ Default: Std. (One original) 3 Ignore Paper Size If you are making prints on non-standar[...]

User Tools Menu 143 4 9 Comb. Sep. Line You can select a separation line in Memory Combine mode. Note ❒ Default: None ❒ Avai lable sett ings: • a = Non e • b = Solid • c = Broken1 • d = Broke n2 • e = CropMarks 10 Cancel Co mb. Specifies whether Combine Originals or Memory Combine mode is cleared a fter finishing yo ur print job. Note[...]

User Tools 144 4 13 Setting Q.start I f the machine is not used for a long period of time, the ink on the drum might dry caus ing image quality to deteriorate. The Auto Quality Start mode automatically recovers image density quality after a se lected time has passed. If A uto Quality Start mode is set to “ Not to use ” , you can regain print qu[...]

User Tools Menu 145 4 17 Auto Sepa rate Specifies whether Job Separation mode is a utomatically carried out when you ma ke prints in All Class, A uto Class, Manual Clas s, or Class mode. Note ❒ Default: ON 18 In k/Mast er Lef t Speci fies wheth er you can chec k the amoun t of ink an d mast er. Note ❒ Default: OFF ❒ Avai lable sett ings: • [...]

User Tools 146 4 5. Stamp No. Mode Descripti on 1 Type You can select the stamp mess age at power on with the Stamp mode. Note ❒ Default: CONFIDEN TIAL 2 Size You can edit t he preset stamp s izes. Note ❒ Default: Standard ❒ Adjustm ent val ues: • Double size 3 Stamp Densit y You can select the style of the stamps. Note ❒ Default: Solid-f[...]

User Tools Menu 147 4 8 Type(Page) You can select the page numbering style at power on in Pa ge Stamp mo de. Note ❒ Default: P1, P2 9 Direction(Page) You c an select the page numbering direction at power on i n Page Stamp mo de. Note ❒ Default: • When you select “ P1, P2 ” or “ 1/5,2/ 5 ” with the “ Type(P age) ” user tool: Upper [...]

User Tools 148 4 6. Admini strator Mo de ❖ ❖ ❖ ❖ User Codes If user codes are turned on, operators must enter their user codes before they can operat e the machine. The machine keeps count of the number of copies made under each us er code. Turn this function on with t he “ Set Use r Code(s ) ” user tool. You ca n also turn on Key Op- e[...]

User Tools Menu 149 4 7. On Line Mode 7 Key Operator Code Use to turn Key Ope rator Code mode on or off. Note ❒ Default: No t to use 8R e g / C h g K e y - OpC ode You can register or change key operator codes. (up to 4 digits) 9 Restrict. Access In Key Counter mode, you have to se t the key counter be fore making prints. (T o turn on Key Counter[...]

User Tools 150 4 User Tool Menus in Detail 1-6 Time Setting A Press the { { { { User Tools } } } } key. B Make su re th at “ 1 ” is se lected, and th en pr ess the [ OK ] key. C Enter 6 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D Enter the year with the nu mber keys. E Press the { { { { q q q q } } } } key[...]

User Tool Menus in Detail 151 4 B Enter 3 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C Enter 4 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D Select the ratio you want to adjust with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } [...]

User Tools 152 4 F Select the class with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. G Enter the number of s tudents with the number keys, and then press the { { { { q q q q } } } } key. Note ❒ Repeat steps F an d G until you have fi nished regist ering num- ber of students in each c lass. [...]

User Tool Menus in Detail 153 4 F Adjust the erase edge margin. If you selecte d A3 to A6 o r 11" × 17" to 5 1 / 2 " × 8 1 / 2 " A Adjust the erase edge margin with th e [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ You can als o enter the ratio with the num ber keys [...]

User Tools 154 4 E Change the nu mber of drum rota- tions while one sheet of paper is fed with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ You can also chan ge the num- ber of rota tio ns w ith the nu m- ber keys. F Press the [ OK ] key. 4-14 No. of Q.star t Note ❒ The default sett[...]

User Tool Menus in Detail 155 4 F Select the time period you want to change how man y times the dr um unit idles with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { } } keys. G Press the [ OK ] key. H Select the number of drum rota- tions with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { }[...]

User Tools 156 4 F Select t he paper type and misfeed condition with the [ ← ← ← ← ] or [ → → → → ] key. G Press the [ OK ] key. H Press the [ Ca ncel ] key. 5-4 Stamp Position Note ❒ The default position an d available settings of each s tamp are a s fol- lows: A Press the { { { { User Tools } } } } key. Stamp positions Default A[...]

User Tool Menus in Detail 157 4 B Enter 5 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C Enter 4 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D Select the stamp position you want to adjust with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } }[...]

User Tools 158 4 B Enter 5 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C Enter 7 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D Select the date stamp direction you w ant to adju st with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } [...]

User Tool Menus in Detail 159 4 A Press the { { { { User Tools } } } } key. B Enter 5 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C Enter 10 with the number keys. Then press t he [ OK ] or { { { { q q q q } } } } key. D Select the page numbering direc- tion you want to adju st with the [ ← ← ← ← ] [ → [...]

User Tools 160 4 C Enter 11 with the number keys, and then press the [ OK ] or { { { { q q q q } } } } key. D Select the backgr ound pat tern with the { { { { ~ ~ ~ ~ } } } } , { { { { } } } } } } } } , { { { { | | | | } } } } , or { { { { { { { { } } } } key. E Press the [ Cha nge ] key. F Move the cursor to the position you wish to edit with th e[...]

User Tool Menus in Detail 161 4 D Keep pressing the [ → → → → ] or { { { { } } } } } } } } key to display the num ber of masters and p rints mad e un der your user code . E Press the [ OK ] key after checking the number of masters and print s made under yo ur user code. 6-2 Reset Counters A Press the { { { { User Tools } } } } key. B Enter [...]

User Tools 162 4 6-5 Chg. User Code A Press the { { { { User Tools } } } } key. B Enter 6 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C Enter 5 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D Keep pressing the [ → → → → ] or { { { { } } } } } } } } key to display you r [...]

User Tool Menus in Detail 163 4 D Keep pressing the [ → → → → ] or { { { { } } } } } } } } key to display you r user co de. E Press the [ OK ] key. F Press the [ Yes ] key.[...]

User Tools 164 4[...]

165 5. Troubleshooting If Your Machine does not Operate as You Want If a malfunction or a misfeed occurs, the following m essages will appear on the panel displ ay. Message Meaning Check the original direc- tio n. The paper is not placed in the same direction as the original. Place the original in the same direction as the p aper. If you press the [...]

Troubleshooting 166 5 - - - - When a service call message is shown on the panel display Press the [ Exit ] key. Then turn the main switch off and back on again. If a service code appears again, contact your service re presentative. Note ❒ If a s ervice code appears on the panel display a fter you turn the main s witch off and on a few times, do n[...]

If You Cannot Make Prints as You Want 167 5 If You Cannot Ma ke Prints as You Want Combine Original s Mode Problem Cause Action Misfeeds occur frequently. Imp roper paper ty pe is select- ed. Select p roper paper type. ⇒ P.41 “ Printing onto Various Kinds of Pape r ” . When you try to s et several functions at a time, you can- not set some fu[...]

Troubleshooting 168 5 Loading Paper The Load Pa per indicator ( B ) lig hts when the paper feed tray runs out of paper. Limita tion ❒ Loa d pape r when the pa per fe ed tray is empty. Do n ot add paper when some paper is left in the tray. Doing so may cause multiple feeds or m isfe ed s. Reference For available paper sizes, ⇒ P.11 “ Print P a[...]

x Clearing Misfeeds 169 5 x Clearing Misf eeds R CAUTION: Note ❒ After clear ing mi sfeeds, make su re that all the doors, covers , and units are closed and the x indicator i s off . ❒ To prevent misfeeds, d o not leave any torn scraps of paper, original s, or mas te rs in th e mac hin e. ❒ Wh en c lea rin g mi sf eed s, d o no t turn off the[...]

Troubleshooting 170 5 • When paper is cu rled, correct the curl as s hown. • When paper edges stick together or paper is not fed in, shuf fle the paper as sho wn. • When pri nting on to post cards or thick paper, lower the printing speed to settin g 1 or 2. ⇒ P.26 “ Changing the Printing Speed ” . • When a multi-feed occurs or the pap[...]

x Clearing Misfeeds 171 5 E If you c annot r emove the misf ed paper, re move paper from the pa- per feed tray. F Set the drum unit and close the front door . Note ❒ For s etti ng th e dru m unit , ⇒ P.128 “ Changing the Color Dr um Unit ” - - - - To prevent paper misfeeds: ⇒ P.169 “” x + A ” Paper M isfeeds in the Paper Feed Sectio[...]

Troubleshooting 172 5 When paper is wrappe d around the drum A Open the fr ont cover. B Lower dr um unit lock lever B1. C Take out the drum. Note ❒ For takin g out th e drum unit, ⇒ P.128 “ Changing the Color Dr um Unit ” . D Remove the misfed paper from the drum. E If you c annot find mi sfed pap er in step D D D D , remove misfed paper fr[...]

x Clearing Misfeeds 173 5 D Remove the misfed paper from the inside as show n in the illus- tration. E If you c annot r emove the misf ed paper, remove paper from the pressure cylinder. F Set the drum unit and close the front door . Note ❒ For s etti ng th e dru m unit , ⇒ P.128 “ Changing the Color Dr um Unit ” - - - - To prevent paper mis[...]

Troubleshooting 174 5 ” x x x x + D ” Master Misf eeds in the Mast er Fee d Section A Pull out the master tray until it stops. B Op en t he mas ter gu id e. C Op en t he mas ter tr ay cov er ( 1). D Remove the master roll (2). E Reset the master roll (1). Note ❒ The master roll must be p osi- tioned as shown in the illustra- tion in step F . [...]

x Clearing Misfeeds 175 5 C Take out the drum. Note ❒ For takin g out th e drum unit, ⇒ P.128 “ Changing the Color Dr um Unit ” . D Pull out the misfed master from inside. E Set the drum unit and close the front door . Note ❒ For s etti ng th e dru m unit , ⇒ P.128 “ Changing the Color Dr um Unit ” ” x x x x + B + E ” Maste r Mi[...]

Troubleshooting 176 5 E Pull out lever (E3) and remove the misfed master. F Return lever (E3) and the master eject unit to thei r orig inal p osi- tion. G Set the drum unit and close the front door . Note ❒ For s etti ng th e dru m unit , ⇒ P.128 “ Changing the Color Dr um Unit ” ” x x x x + E ” Master Misfee ds in the Master Eject Sect[...]

x Clearing Misfeeds 177 5 B Open the black cover at the bot- tom of the master tray and remove turn scraps of the master. C Close the black cover and slid e in the master tray. Note ❒ Make sure that you secu rely close the black cover bef ore slid- ing in the master tray. ” x x x x + P ” Or iginal Misfee ds Occur When Using th e Optional Do c[...]

Troubleshooting 178 5 - - - - To prevent original misfeeds: Placing the following kinds of origi- nals on the exposure glass . • Originals heavier than 128g/m 2 , 34 lb • Originals lighter than 52g/m 2 , 14 lb • Originals smaller than 148mm × 210mm, 5.9" × 8.3" • Originals larger than 297mm × 864mm, 11.6" × 34.0" •[...]

When the Open Cover/Unit Indicator ( M ) Lights 179 5 When the Open C over/Unit Indic ator ( M ) Lights M Make sur e that th e foll owing doors/co vers are closed. ❖ ❖ ❖ ❖ Front door Close the front door c ompletely. ❖ ❖ ❖ ❖ Optional document feede r (ADF) cov- er Close th e documen t feeder ( ADF) cover until it locks in posi tion.[...]

Troubleshooting 180 5 When the Add Ink Indicator ( j ) Lights The Ad d Ink indicator ( j ) li ghts when it is time to supply ink. R CAUTION: R CAUTION: R CAUTION: R CAUTION: Note ❒ Be sure to supply ink of the same color as the current drum. ❒ Ink is readily removed from skin by waterles s hand cleaners followed by washing with s oap and water.[...]

When the Add Ink Indicator ( j ) Lights 181 5 C Remove the used in k cartridg e. D Remove the cap of th e new ink cartridg e. E Insert the new cartridge into the ink holder. Note ❒ Always supply ink of the same color. F Return the ink holder to its original position u ntil it clicks. G Close the front door. The machine will start idling to supply[...]

Troubleshooting 182 5 When the Master End Indic ator ( C ) Lights The Master End indicator ( C ) lights when it is time to replace the master roll or when you need to s et the master roll. R CAUTION: A Pull out the master feed unit until it stops. B Op en t he mas ter gu id e. C Open the master feed unit cover (1). D Remove the used master roll (2)[...]

When the Master End Indicator ( C ) Lights 183 5 G Insert the paper ed ge of the master roll as show n in the illustration until the master edge reaches t he arrow mark. H Close the master guide. I Push in the master feed unit until it stops.[...]

Troubleshooting 184 5 When the Master Ej ect Indicator ( k ) Lig hts The Mast er Eject indicator ( k ) lights when it is time t o empty the m aster eject unit or when you need to set the master eject unit. Note ❒ Ink is readily removed from skin by waterl ess ha nd cleaner s fol- lowed by washi ng with s oap and water. ❒ Be careful not to get a[...]

When Other Indicators are Lit 185 5 When Other I ndicators are Lit Indicator Meaning and a ction The key counter (option) is not set. Ins ert the key counter. • (Metric vers ion) • (Inch version) Color drum unit is installed. • (Metric vers ion) • (Inch version) A3/11 " × 17" drum unit is set. • (Metric vers ion) • (Inch vers[...]

Troubleshooting 186 5 When Prints are not Delivered in a Neat Stack When Printi ng on Small Size Paper A Adjust the end plate angle by turning the s crew clockwise or countercl ockwi se. When the Machine Can not Detect the Paper Size If the paper size is not detected cor- rectly wh en printin g, prints might not be delivered in a neat stack. To sol[...]

Poor Printing 187 5 Poor Printing Dirty B ackground If the background of prints is dirty, the drum unit might be dirty. R CAUTION: R CAUTION: R CAUTION: Note ❒ To avoid getting d irty background prints when p rinting onto pap er smaller than the original image, select a suitable reduction ratio or use larger pri nt pa- per. ❒ When printing onto[...]

Troubleshooting 188 5 B Pull out the drum u nit. Note ❒ For taking out th e drum unit, ⇒ P.128 “ Changing the Color Drum Unit ” . C While pressing the drum lock, turn the drum until you can see the trailing edge of the master. D With a dry soft cloth, remove any ink that has accumulated on the trailing edge of the drum un it. Important ❒ [...]

Poor Printing 189 5 E Turn the drum unit and lock it after cleaning it. F Insert the drum unit until it locks in position, a nd then lower the drum unit lock lever. G Close the front door. H Turn on the main switch. TPEH091E TPEH021E[...]

Troubleshooting 190 5 Black Lines/St ained Prints Check the plate n cover and clean i t if dirty. ⇒ P.195 “ Cleaning the platen cover ” . Check th e exposur e glass and cl ean it if dir ty. ⇒ P .195 “ Cleaning the exposure glass ” . Check the she et of the optional document f eeder and clean it if dirty. ⇒ P.196 “ Cleaning the Sheet[...]

191 6. Remarks Do's and Don'ts R CAUTION: Important ❒ Make sure tha t m indic ator on the PC controller operation panel is off before unplugging the power cord . • While printing, do not turn off the main switch. • While printi ng, do not unplug the po wer cord. • While printing, d o not open the door or covers. • While printing[...]

Rem arks 192 6 • If the printed p aper is stored for m ore than one da y, the paper may become wrinkled. If this paper is used , wrinkles may also appear on the master. If the paper will be stored for more than one day, store it in its original wrapping paper or other prot ective covering. • Shadowing may occur if the printed image at the re ar[...]

Where to Put Your Machine 193 6 Where to Put Your Machine Environment Your machine's location should be carefully chosen because environmental con- ditions greatly affect its performance. Optimum environmental condition s R CAUTION: R CAUTION: R CAUTION: • Temperature: 10 – 30 ° C, 50 – 86 ° F • Humidity : 20 – 90% RH • A stro ng[...]

Rem arks 194 6 Power Connec tion R WARNING: R CAUTION: R CAUTION: Make sure the plug is firmly inserted in the outlet. Machine Cl earance Place the machine nea r the power source, providing c learance as shown. ❖ ❖ ❖ ❖ Main fram e *. Paper delivery tray 1.More than 10cm, 4.0" 2.More than 60cm, 23.7" 3.More than 60cm, 23.7" 4.[...]

Maintaining Your Machine 195 6 Maintaining Your Machine To maintain high print quality, cl ean the following parts and units regular- ly. ❖ ❖ ❖ ❖ Cleani ng th e mach ine Wipe the machine with a soft, d a m p c l o t h . T h e n w i p e i t w i t h a dry cloth t o remove the water. Important ❒ Do not use chemical cleaner or or- ganic solve[...]

Rem arks 196 6 Cleaning t he Optional Document Fe eder Cleaning the Sheet A Lift the document feeder. B Clean the sh eet with a damp clot h and wipe it with a dry cloth. Note ❒ If you do not clean the sheet, marks on the sheet will be print- ed. AM1D600[...]

197 7. Specifications Main Frame ❖ ❖ ❖ ❖ Configuration : Floo r sta ndin g (wit h cust om ta ble or cab inet) . ❖ ❖ ❖ ❖ Printing P rocess: Full automatic on e drum system ❖ ❖ ❖ ❖ Original Type: Sheet/Book ❖ ❖ ❖ ❖ Original Size: Maxi mum 30 0mm × 432mm, 11.9" × 17.0" ❖ ❖ ❖ ❖ Pixel Density: 600dpi ?[...]

Specifications 198 7 ❖ ❖ ❖ ❖ Printing Area: • A3 drum : • Inch version: More than 290 × 420mm, 11.4" × 16.6" • Metric version: More than 290mm × 410mm, 11.4" × 16.2" • A4 drum : More than 290mm × 200mm, 11.4" × 7.8" ❖ ❖ ❖ ❖ Print Paper Size : Maxi mum: 297 mm × 432mm, 11.6" × 17.0&q[...]

Main Frame 199 7 ❖ ❖ ❖ ❖ Master Eject U nit Capa city: • A3 drum More than 70 masters • A4 drum 100 masters ❖ ❖ ❖ ❖ Dimensions (W × × × × D × × × × H): ❖ ❖ ❖ ❖ Weight: • Mach ine: Less than 105kg, 231.5 lb ❖ ❖ ❖ ❖ Noise Emissio n *1 Sound p ower level Sound p ress ure l evel *2 *1 The above measurements[...]

Specifications 200 7 ❖ ❖ ❖ ❖ Power Consumption: • Making a maste r: Less than 0.26kW • Printing: Less than 0.25kW ❖ ❖ ❖ ❖ Optional Equipment: • Drum unit: Color Drums A3, 11 " × 17" A4, 8 1 / 2 " × 11" • Key Counter • Document Feeder • PC Controller Note ❒ Specifications are subject to c hange wit[...]

Document Feeder (Option) 201 7 Document Fe eder (Option) ❖ ❖ ❖ ❖ Original Type: Sheet ❖ ❖ ❖ ❖ Original Weight: 52.3g/m 2 to 127.9g/m 2 , 13.9 lb to 34 lb ❖ ❖ ❖ ❖ Original Size: Max. 297mm × 420mm, 11.6" × 16.5" Min. 149mm × 210mm, 5.9" × 8.3" ❖ ❖ ❖ ❖ First Copy Time (Master Process Time): Less[...]

Specifications 202 7 Twin Color Press Roller Printing System TC- II (Option) ❖ ❖ ❖ ❖ Configuration : Floo r sta ndin g (wit h cust om ta ble or cab inet) ❖ ❖ ❖ ❖ Printing P rocess: Twin color press roller printing s ystem ❖ ❖ ❖ ❖ Print Paper Size : Maxi mum: 297 mm × 432mm, 11.6" × 17.0" Mini mum: 7 0mm × 250mm,[...]

Consumables 203 7 Consumables Note ❒ Specifications are subjec t to change withou t notice. Name S ize Rem ark s Master : Length: 140m, 52 0ft/roll Width: 320mm, 12 .6" 2 Rol ls/case A3 drum More than 255 maste rs can be made per roll A4 drum 410 ma sters can be ma de per roll Ink-Black 1,000ml/pack Environmental conditions: -5 to 40 ° C 10[...]

204 INDEX {W W W W} {V V V V} keys ( Spe ed ke ys) , 6 { ~ }{ } }{ | }{ { } , 6 16 single- sided originals → 1 sin gle- sided prin t of 16 image s , 114 1 single-si ded or iginal → 1 s ingle- sided prin t of 2 imag es , 66 1 single-si ded or iginals → 1 s ingle- sided prin t of 4 imag es , 66 2 single-si ded or iginals → 1 sin gle- sided pr[...]

205 E Eco.Mode ON/O FF , 141 Econom y mode , 48 { Economy Mode } key , 5 Edge Erase , 40 { Edge Er ase } key , 5 Energy Saver mode , 22 Energy Saving , 138 envelopes , 41 environment , 193 erasing center and ed ge margins , 39 Exit , 8 exposure glass , 3 F flip up cover , 1 Forma t , 10 4 front do or , 1 H handle E1 , 2 I Idli ng for Q.st art , 143[...]

206 N Next , 8 No. of Q.start , 144 , 154 No. of Skip Feed , 143 , 15 3 No Orig. Si ze , 142 No Orig. Size D F , 142 Num ber k eys , 6 O OK , 8 { On Line } key , 5 On Li ne Ove rlay , 104 On Li ne pri ntin g , 79 Open Cover/Unit Indicator ( M ) , 179 opera tion p anel , 1 , 5 optional document feeder , 123 opti ons , 4 , 20 0 , 201 origi nal misfee[...]

207 specification s , 197 Stamp , 112 , 146 Stamp Density , 146 { Stamp } key , 5 Stamp Posit ion , 146 , 156 standard paper , 41 standa rd pr inting , 19 { Start } key , 6 stopp ing a multi-prin t run , 27 Storage Overlay , 104 stori ng a progr am , 70 System , 137 T thick paper , 41 Time Settin g , 137 , 150 Tin t Mo de , 25 trai lin g edge guide[...]

208 UE USA C235 MEMO[...]

Operating I nstructions For safe ty, p lease re ad thi s manu al car efull y befo re yo u use th is pro duct a nd keep it handy for future reference.[...]

Operating Inst ructions Type fo r 5499/LD D 180/JP850 0/3460D NP Printed i n Japan UE USA C244 -8697A[...]

Introduction This manu al descri bes detail ed instruc tions on the operatio n and notes about the use of this machin e. To get m aximum versat ility fro m this machine all op erators a re req uested to read th is manu al caref ully and follo w the in struction s. Plea se keep t his manu al in a ha ndy p lace nea r the mach ine. Notes: Some illu st[...]

Note to users in the United States of America Notice: This equi pment has been tes ted and fou nd to c omply with the limi ts for a Cl ass B digi tal devic e, pursu- ant to Part 15 of the FCC Ru les. T hese limit s are designed to provid e reason able pr otection against harmful in terferen ce in a resid ential ins tallation . This equi pment gene [...]

i Safety Information When using this machine, the following safety precautions should always be fol- lowed. Safety D uring Oper ation In this manual, the following i mportant symbols are used: R WARNING: R WARNING: Indica tes a pot entially haza rdous situat ion w hich, if ins tructi ons are no t follo wed, c ould result in de ath or seriou s in ju[...]

ii R CAUTION: • Protect the machine from damp ness or wet weather, such as rain, snow. • Unplug the power cord from the wall outlet before you move the mach ine. While moving the machine , you should take care that the power cord wil l not be damaged unde r the machine. • When you disconnect the power plu g from the wall outlet, always pull t[...]

iii How to Read This Manual Symbols In this manual, the following sy mbols are used: R WARNING: This symb ol indicates a potenti ally hazar dous situation tha t might resu lt in death or serious injury when you misuse the machi ne without following the in- structions under this symbol. Be sure to read the instructions , all of which are de- scribed[...]

iv Making Prints Before making prints using thi s ma- chine, you have to mak e a master by pres sing t he { { { { Start } } } } key. When you press the { { { { Start } } } } key, the ma chin e scans the original ima ge and makes a maste r. This procedu re describes how to ma ke basic prints. A A A A Place your originals in one of the following two [...]

v To decr ease th e image density, press the { { { {V V V V} } } } key. See p.25 “ Ad- justing the Image Dens ity of Prints ” . D D D D Enter the desi red numb er of prints with the number keys. E E E E Press the { { { { Print } } } } key. When th e print job has finishe d, pres s t he { { { { Clear Modes/Energy Sav- er } } } } key. Previous ly[...]

vi What You Can do with this Machine Below is a quick summary of this ma- chine's features an d where to look in this manual for more information. ❖ ❖ ❖ ❖ Standard Printing See p.19 “ St andar d Prin ti ng ” . ❖ ❖ ❖ ❖ Energy Saver Mode See p.22 “ Energy Saver Mode ” ❖ ❖ ❖ ❖ Adjusti ng the Pri nt Imag e Positi on[...]

vii ❖ ❖ ❖ ❖ Directional Magnif ication (%) See p.3 6 “ Dire ctiona l Magnif ica- tion (%) ” . ❖ ❖ ❖ ❖ Directional Magnifi cation (Size) See p.3 8 “ Dire ctiona l Magnif ica- tion (Si ze) ” . ❖ ❖ ❖ ❖ Erasing Center and Edge Margins See p.40 “ Erasing C enter an d Edge Marg ins ” . ❖ ❖ ❖ ❖ Edge Erase See p.[...]

viii ❖ ❖ ❖ ❖ Manual Class Mode with two or More Originals See p.59 “ M anual Class Mode with two or More Originals ” . ❖ ❖ ❖ ❖ Class M ode See p.62 “ Class Mode ” . ❖ ❖ ❖ ❖ Combining Originals See p.64 “ Combine Originals ” . ❖ ❖ ❖ ❖ Aut o C ombin e Mode See p.69 “ Au to Com bine Mod e ” . ❖ ❖ ❖[...]

ix ❖ ❖ ❖ ❖ Printing in Two Colors See p.134 “ Printing in Two Col- ors ” . ❖ ❖ ❖ ❖ Image Rotation See p.85 “ Im age R otati on ” . ❖ ❖ ❖ ❖ Make-up Printing See p.97 “ Mak e-up P rint ing ” . ❖ ❖ ❖ ❖ Merging Images See p.108 “ Image Overlay ” . ❖ ❖ ❖ ❖ Date Sta mp See p.111 “ Date Stamp ” .[...]

x ❖ ❖ ❖ ❖ Memory Combine See p.118 “ Memory Combine ” . ❖ ❖ ❖ ❖ Original Storage See p.103 “ Original Storage ” . ❖ ❖ ❖ ❖ Stora ge Over lay See p.108 “ Image Overlay ” . GRMCOM0E 4 3 12 2 3 1 4 GRREPE0E GROVER0E ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE ABCDE [...]

xi TABLE OF CONTENTS Machine Exterior ....... .............. .............. ......... .............. .............. .............. ... 1 Machine Inter ior ............. ......... .............. .............. .............. ......... .............. ... 2 Options ................. .............. .............. .............. .......... .............[...]

xii Printing onto Various Kinds of Pa per.......... .............. .............. .............. . 43 Printing onto T hick Paper ............. ..... ........ ........ ........ ....... ...... ........ ....... ....... 43 Printing onto Standard Paper ......... ...... ....... ........ ........ ........ ........ ........ ........ . 43 Printing onto Enve[...]

xiii Command Sheets for Make -Up Printing ................ .............. .............. ..... 90 Command Sheets ... ........ ..... ........ ........ ....... ........ ...... ....... ........ ........ ..... ....... 90 Making a Command Sheet ........... ........ ....... ........ ...... ....... ........ ........ ........ .... 90 Command Sheets and Fin[...]

xiv 4. User Tools Accessing the Us er Tools...... .............. .............. ......... .............. ............. 141 User Tools Menu.. .......... .............. .............. ......... .............. .............. ........ 143 1. System ..... ........ ........ ..... ........ ........ ..... ........ ........ ........ ..... ........ ........ [...]

xv When the Ope n Cover/Unit Indicator ( M M M M ) Lights................ ......... ........ 185 When the Add Ink Indicator ( j j j j ) Lights ............ .............. .............. ........ 186 When th e Mast er End Indica tor ( C C C C ) Lights........... .............. ......... ........ 188 When th e Mast er Eject Indicator ( k k k k ) Ligh[...]

xvi[...]

1 Machine Ex terior 1. Front door Open to access the inside of the machine. 2. Flip up cover Flip up to access th e keys underneat h. 3. Operation panel See p.5 “ O peration Panel ” . 4. Master tray O p e n t h i s u n i t w h e n i n s t a l l i n g t h e m a s - ter. 5. Paper f eed tray do wn key Press to lower the paper feed tr ay. 6. Paper [...]

2 Machine Inter ior 1. Main switch Use to tur n the power on or off. 2. Paper a lignmen t wings Lift or l ower the wing s depending on the type of pa per be ing u sed. 3. Paper de livery end p late This plate ali gns the leading edge of prints . 4. Paper delivery end plat e knob Use to move the end p late. 5. Paper delivery tray Comp leted pr ints [...]

3 9. Ink holder Set the ink c artri dge in thi s holder. 10. Drum unit lock lever B1 Lower t o unlo ck an d pull out th e drum unit. 11. Drum u nit The master is wrapp ed around t his unit . 12. Expo sure glass Position origin als here face down for printing . 13. Expo sure glas s cover or docu - ment feeder (option) Lower this cover o ver an origi[...]

4 Options ❖ ❖ ❖ ❖ Docume nt feeder 1. Document Feeder Note ❒ Other options : • Color Drum Type 80(L) A3, 11" × 17" • Color Drum Type 80(S) A4, 8 1 / 2 " × 11" • Exposur e Glass Co ver • Printer Unit Type 80 RCP80 • Interface Cable Typ e 85 • Editi ng Funct ion T ype 85 • Key Counter • PC Controller ?[...]

5 Operation Panel Keys 1. { { { { Quality St art } } } } key See p.77 “ Qual ity Star t Mode ” . 2. { { { { Security } } } } key See p.76 “ Securi ty M ode ” . 3. { { { { Skip Feed } } } } key Press to select sk ip feed print ing. See p.71 “ Skip Fe ed Prin tin g ” . 4. { { { { User Tools } } } } key Press to change the default settings[...]

6 16. { { { { Class } } } } key Press to select All Class, Auto Class, Manu al Cl ass, or Cl ass m ode. S ee p.5 2 “ All Cl ass Mode ” , se e p.54 “ Auto Cl ass Mode ” , s ee p.5 7 “ Manual Class M ode with One Origina l ” , see p.59 “ Manua l Class Mo de with two or More Origi nals ” , see p.62 “ Class Mode ” . 17. { { { {W W W[...]

7 Indic ators 1. Special feature indicator Lights to indi cate that special featur es have been selected. To access the spe cial features, lift up t he cover on the left sid e of the ope ration panel. 2. Monitor indicators These indica tors light to inform yo u of the status of the ma chine. See p.17 1 “ If Your Machine Does Not Operate as You Wa[...]

8 Panel Display The panel display shows the machine status , error messages, and function menus. 1. Items for the selected function 2. These keys correspond to the se- lectable items shown above them on the panel d isplay. To select an item shown on th e panel displa y, press the key directly below it. 3. Machine statu s or messages 4. Items whic h[...]

9 Panel Displ ay Layout The basi c elements used on the pan el display are shown below. Understanding their meaning helps you use this mach ine's features quickly and eas ily. ❖ ❖ ❖ ❖ Samp le di splay w hen sel ect ing th e [ Original ] key 1. Machine statu s or message 2. Available functions 3. Illustrations o f displays in this manua[...]

10[...]

11 1. Operation Print Paper The following limitations apply Non -rec om men ded pap er: • Roughly cut paper • Paper of different thic kness in the same stac k • Envelopes heavier tha n 85g/m 2 , 22 lb. • Folded, curl ed, creased, or dama ged paper • Torn paper • Slippery p aper • Rough paper • Paper with any kind of coatin g (such a[...]

Operation 12 1 • The following types of en velopes Note ❒ If you p rint on rough grained pap er, the copy image might be blurred. ❒ You can use A3 ( 297 × 420mm) or 11" × 17" originals or printing paper. When you want to print the entire image of an A3, 11" × 17" original, sele ct Reduce mode because the maximum print a[...]

Originals 13 1 Originals The machine can detect the f ollowing original s izes placed on the exp osure glass. If the machine cannot d etect the original sizes properly, select the a rea to copy with the { { { { Edge Erase } } } } key. See p.41 “ Edge Eras e ” . The mach ine may not detect the original size properly when: • Originals contain i[...]

Operation 14 1 a = 8mm, 0.32" Origina l Print a[...]

Printing Preparations 15 1 Printing Preparations Loadin g Paper A A A A Care full y open the pape r fee d tray. B B B B Lift the paper feed side pl ates. Note ❒ When loading larger paper, slide out the extender. C C C C Make sure that t he paper feed side plates knob lock le ver is raised (lock is released), and then grasp the paper feed side pla[...]

Operation 16 1 E E E E Make sure that the paper feed side plates are touching both sides of the pape r, and then pu sh the lock lever for the side p lates down to lock the side p lates into posi tion. Important ❒ Alwa ys make sure th at you push the lo ck lever for the side plates down to lock the sid e plates i nto posit ion. Note ❒ Make sure [...]

Printing Preparations 17 1 When y ou u se stan dard paper (47.1 g/m 2 to 105 g/m 2 , 12 .5 lb to 28 lb) A Adjust the side plates to matc h the paper siz e scale on the end plate si de. C C C C Lower or lift the p aper alignment wing s by turn ing the left and righ t kno bs. Note ❒ When the guides ar e up, you might not be able to l oad the unit t[...]

Operation 18 1 Entering a User Code to Use the Machine If user codes are turne d on, operators must enter their use r code before they can use the machin e. The ma chine keeps count of the number of copies made under e ach user code. Note ❒ If you wa nt to us e this feat ure, you must turn it on and re gister the user codes with the user tools. Y[...]

Standard Printing 19 1 Standard Printing A A A A Make sure that the mac hine is ready for prin ting. B B B B If user codes are turned on, enter your user code with the number keys, and then press th e { { { { q q q q } } } } key. Reference See p.18 “ Ent ering a User Code to Use the Machine ” . C C C C Make sure that there are no previ- ous set[...]

Operation 20 1 I I I I Press the { { { { Proof } } } } key and chec k the image density and th e imag e position on the proof p rint. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key. See p.24 “ Adjust ing the Position of P rinted Im ages ” . ❒ If the image density is slightly d a r k o r l i g [...]

Standard Printing 21 1 B B B B Remove the prints from the paper delivery tr ay and close the paper deliver y side p late.[...]

Operation 22 1 Energy Sa ver Mode If you do not operate the machine for a certa in period the machine can enter Idling for pre-printi ng function to remove ink from inside the ink drum, and then the machine can e nter Energy Saver mode to save ener gy consumption. You can pre ss the { { { { Clear Modes/En ergy Saver } } } } key to cancel Energy Sav[...]

Auto Reset 23 1 Auto Reset If you do not operate the machine for a certain period after printi ng, the machine will return to the initi al condition. This function is ca lled “ Auto Rese t ” . Note ❒ You can chang e the time the machin e waits before Auto Reset starts. See “ Au- to Res et ” on p.1 43 “ 1. System ” . ❒ The machine wi[...]

Operation 24 1 Adjusting the Position of Printed Images Use the following proc edure to adj ust the position of print images as re- quired. * Paper feed dire ction Limita tion ❒ For 308 mm, 12.2"-width paper, you can only adju st the pos ition of the pri nt ima ge 5 mm, 0.2" up or down. Note ❒ When the main switch is turne d off, the [...]

Adjusting the Image Density of Prints 25 1 Adjusting the Image Density of Prints There are two ways to adjust the im- age density of prints: ❖ ❖ ❖ ❖ Before ma king a master Use the { { { { Image D ensity } } } } key. ❖ ❖ ❖ ❖ After making a master Use the { { { {W W W W} } } }{ { { {V V V V} } } } (Speed) keys. Befo re M aking a Mas [...]

Operation 26 1 Tint Mode Use this function to make halftone prints. A A A A Press the [ Ori ginal ] key. B B B B Select the [ Tint ] with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. C C C C Press the { { { { Start } } } } key. GRTINT0E[...]

Changing the Printing Speed 27 1 Changing the Printing Speed Use the { { { {W W W W} } } } or { { { {V V V V} } } } key to adjust th e printing speed. The relationship be- tween printing speed and print quali- ty depends on the t ype of paper you use. A A A A Press the { { { {V V V V} } } } key to increase the speed and press the { { { {W W W W} } [...]

Operation 28 1 Stopping a Multi-print Run Stopping a Multi -print Run to Print A nother Or iginal A A A A Press the { { { { Clear/ Stop } } } } key. B B B B Set the original. C C C C Enter the numb er of prints and press the { { { { Start } } } } key. Changing th e Number of Prints Ent ered and Checki ng Completed Prints A A A A Press the { { { { C[...]

Reducing and Enlarging Using Preset Ratios 29 1 Reducing and Enlarging Using Preset Ratios Use this functi on to ha ve origi nals re- duced or enlarged by a preset ratio. A tota l of 7 r atio s are a vaila ble (3 en- largement ratios, 4 reduction ratios). Note ❒ The leading edge of the print im- age does not shift when a prin t im- age is made wi[...]

Operation 30 1 A A A A Press the [ Ra tio ] key . B B B B Select the desired ratio with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. C C C C Press the [ OK ] key. D D D D Make sure that the original and the print paper are the correc t size. E E E E Place your original on t he expo- sure glass[...]

Auto Magnification 31 1 Auto Magnification Use this function to have the machine choose an app ropriate enla rgement or re- duction ratio based on the size of your original and the p aper size you select. Note ❒ The range of ratios whic h the machine can s elect depends on where you place the original: • On the exposure glass : 50 – 200% ❒ [...]

Operation 32 1 ❖ ❖ ❖ ❖ Inch version *1 The machine automatically rotates t he origina l image by 90 ° to match the paper direc tion and s elects an approp riate re produ ction ratio . See p.85 “ Ima ge Rota - tion ” . *2 Place these originals in t he optional document feede r. ❒ Depending on the original type, a suitable reproduction[...]

Auto Magnification 33 1 E E E E Press the { { { { Start } } } } key. F F F F Check the image position on the trial or proof pr int. Note ❒ If the im age position is not co rrect, adju st it us ing the [ Image = = = = ] keys . Se e p.24 “ Adjusting the Pos ition of Printed Images ” . G G G G Make y our prin ts.[...]

Operation 34 1 Zoom Use this function to fine-tune the re- production ratio in increm ents of 1%. Note ❒ The range of r atios you ca n select depends on where you place the ori gina l: • On the exposur e glass: 50 – 200% A A A A Press the [ Ra tio ] key . B B B B Select [ Mag. ] with the [ → → → → ] or { { { { } } } } } } } } key. Not[...]

Zoom 35 1 Using t he nu mber ke ys A Enter the ratio with the num- ber ke ys. B Press the { { { { q q q q } } } } key. G G G G Press the [ OK ] key. H H H H Make sure that the original and the print paper are the correc t size. I I I I Place your original on t he expo- sure glass or in the optional docu- ment feeder. J J J J Press the { { { { Start[...]

Operation 36 1 Directional Magnification (%) Use this function to choose different repr oducti on ratios for the ho rizont al and vertical directions. The result is a squeezing o r stretchi ng effect. Note ❒ The range of r atios you ca n select depends on where you place the ori gina l: • On the exposure glass: 50 – 200% A A A A Press the [ R[...]

Directional Magnification (%) 37 1 C Enter the horizontal ratio with the number keys. D Press the { { { { q q q q } } } } key. G G G G Press the [ OK ] key. H H H H Make sure that the original and the print paper are the correc t size. I I I I Place your original on t he expo- sure glass or in the optional docu- ment feeder. J J J J Press the { { {[...]

Operation 38 1 Directional Magnification (Size) Use this functio n to have the machine select su itable reproduction ra tios based upon the dimens ions of the print yo u requir e and the siz e of the original you specify. 1. Horizontal original s ize 2. Vertical original size 3. Horizontal prin t size 4. Vertical print size Note ❒ You can enter s[...]

Directional Magnification (Size) 39 1 F F F F Enter the vertical original size with the number keys and press the { { { { q q q q } } } } key. Note ❒ To change the value entered, press t he { { { { Clear/St op } } } } key and enter the new value. ❒ Up to 999mm, 99.9" can be en- tere d. G G G G Enter the vertical print size with the number [...]

Operation 40 1 Erasing Center and Edge Margins When printi ng from thick bo oks, or similar originals, the binding margin at the center and the edges might ap - pear on prints. To prevent this, per- form the following steps. Important ❒ Be sure to keep the platen cover at an angle of at least 25 degrees with the exposure glass . ❒ If you do not[...]

Edge Erase 41 1 Edge Erase This function erases all four margins of the original image. ❖ ❖ ❖ ❖ Using Edge Erase mode ❖ ❖ ❖ ❖ When not using Edge Eras e mode When printing from thick books, or similar originals, the binding margin at the cent er and the ed ges might appear on prints. The ma- chine era ses these ma rgins auto- matica[...]

Operation 42 1 F F F F Check the image position on the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key. See p.24 “ Adjust ing the Position of P rinted Im ages ” . G G G G Make y our prin ts.[...]

Printing onto Various Kinds of Paper 43 1 Printing onto Various Kinds of P aper Before printing onto thick pape r, thin paper, envelopes or special kinds of paper loa ded in the pa per fee d tra y, you mus t select the paper t ype. Printing ont o Thick Paper If you wish to print onto thick (128 to 209.3g/m 2 , 3 4 to 55.6 lb or he avier) paper, pe [...]

Operation 44 1 Printin g onto Envelopes A A A A Press the [ Ppr.Type ] key. B B B B Select [ Special ] with the [ → → → → ] or { { { { } } } } } } } } key. C C C C Press the [ OK ] key. D D D D Place the envelopes in the paper feed tray as shown in the illustra- tion. * Paper feed direction Note ❒ When you use envelopes , the paper feed t[...]

Printing onto Various Kinds of Paper 45 1 - - - - To prevent paper misfeeds: If paper misfeeds occur frequently, even i f you have se lect ed a su itabl e paper, follow the steps below. A Press the [ S elect ] key. B Select th e type of pa per misfe ed and frequency with the { { { { ~ ~ ~ ~ } } } } , { { { { } } } } } } } } , { { { { | | | | } } } [...]

Operation 46 1 Selecting Original Modes Select one of the following five modes to matc h you r originals : ❖ ❖ ❖ ❖ Letter mode Select when origi nals contain only letters (no pictures). ❖ ❖ ❖ ❖ Letter/Photo mode Select when originals contain pho- togra phs or p ictu res wi th let ters. ❖ ❖ ❖ ❖ Photo mode Select when original[...]

Selecting Original Modes 47 1 D D D D Adjust the contrast with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ Use "High" to produce cl ear prints of peopl e's fa ces. ❒ Use "L ow" to produ ce c lear prints of lan dscape s and scen- ery etc. E E E E Press the [[...]

Operation 48 1 B Adjust the contrast with the [ ← ← ← ← ][ → → → → ] or { { { { ~ ~ ~ ~ } } } }{ { { { } } } } } } } } keys. C Press the [ OK ] key. Note ❒ Use "High" t o produce clear prints of people's faces. ❒ Use "Low" to produce cl ear prints of lands capes and scenery etc. D D D D Select the dot pa[...]

Selecting Original Modes 49 1 B B B B Select [ Pencil ] w ith the [ → → → → ] or { { { { } } } } } } } } key. C C C C Press the [ OK ] key. D D D D Place your original on t he expo- sure glass . E E E E Press the { { { { Start } } } } key. F F F F Check the image position on the trial or proof pr int. Note ❒ If th e ima ge posi ti on is n[...]

Operation 50 1 Economy Mode W h e n y o u w a n t t o s a v e i n k , s e l e c t Econ omy mo de. Note ❒ Prints will be lighter in th is mode. A A A A Press the { { { { Economy Mode } } } } key. B B B B Place your original on t he expo- sure glass or in the optional docu- ment feeder. C C C C Press the { { { { Start } } } } key. D D D D Check the[...]

Auto Cycle 51 1 Auto Cycle Use the { { { { Auto Cycl e } } } } key to process masters and ma ke prints in a single operation. A A A A If the indicator of { { { { Auto Cy cle } } } } key is off, press the { { { { Auto Cycl e } } } } key. B B B B Press the { { { { Start } } } } key.[...]

Operation 52 1 All Class Mode Preparation You have to store the number of students in eac h class with the user tools. See p. 157 “ 3-5 Cl ass Ente r No. ” . Use the { { { { Class } } } } key to make sets of prints from th e same original. All the stored numbers of prints are made for each set. This feature is useful for te achers who frequentl[...]

All Class Mode 53 1 E E E E Press the { { { { Start } } } } key. F F F F Check the image position on the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key. See p.24 “ Adjust ing the Position of P rinted Im ages ” . G G G G Make y our prin ts.[...]

Operation 54 1 Auto Class Mode Preparation You have to store the number of students in eac h class with the user tools. See p. 157 “ 3-5 Cl ass Ente r No. ” . Use the { { { { Class } } } } key to make sets of prints from the same o riginal. The stored numbers of prints are made for each set. This feature is useful for te achers who frequently m[...]

Auto Class Mode 55 1 Selecting classes wit h the { { { { ~ ~ ~ ~ } } } } , { { { { } } } } } } } } , { { { { | | | | } } } } , or { { { { { { { { } } } } key A Select t he desir ed clas s for th e 1 st grade with the { { { { } } } } } } } } key. The numbe r of stud ents is di s- played on the counter. Note ❒ When you want to select all the clas s[...]

Operation 56 1 F F F F Place one original on the expo- sure glass or in the optional docu- ment feeder. G G G G Press the { { { { Start } } } } key. H H H H Check the image position on the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key. See p.24 “ Adjust ing the Position of [...]

Manual Class Mode with One Original 57 1 Manual Class Mode w ith One Original Use the { { { { Class } } } } key to make sets of prints fr om the same or iginal. V ari- ous number s of prints ar e made for each set. Note ❒ When you set the M anual Class mode , Job Sep aration m ode is au to- matically turned on. Th e job sepa- rator pulls the top [...]

Operation 58 1 F F F F Enter the desi red numb er of prints for the second set with the number ke ys. G G G G Press the { { { { q q q q } } } } key. Note ❒ Repeat steps F and G for each set. ❒ The max imum nu mber o f sets that can be made is 20. H H H H Press the [ OK ] key. I I I I Place one original on the expo- sure glass or in the optional[...]

Manual Class Mode with two or More Originals 59 1 Manual Class Mode with two or More Originals Preparation To use this function, you have to select “ by each original ” with the “ Class Manual Set ” s etting in the user tools. Se e “ Class Manua l Set ” on p.146 “ 4. Mode Setting ” . Use the { { { { Class } } } } key to make sets of[...]

Operation 60 1 E E E E Press the { { { { q q q q } } } } key. F F F F Enter the desi red numb er of prints for the se cond original with the number k eys. G G G G Press the { { { { q q q q } } } } key. Note ❒ Repeat steps F and G for each ori gina l. ❒ Up to 20 classes can be set. H H H H Press the [ OK ] key. I I I I Place the first original f[...]

Manual Class Mode with two or More Originals 61 1 N N N N After the first set is c ompleted, place t he se cond o rigin al on the exposure glass, an d then press the { { { { Sta rt } } } } key. Note ❒ Repeat step N un til you have finished prin ting.[...]

Operation 62 1 Class Mode Use the { { { { Class } } } } key to make sets of prints from the same o riginal. The s a m e n u m b e rs o f p r i nt s a re ma de fo r each set. Note ❒ When you choose Class mode, Job Separation mod e is automatically turned on. The job se parator pull s the top sheet of each set delivered to the paper delivery tray t[...]

Class Mode 63 1 F F F F With the nu mber keys, enter the nu mb e r of se ts yo u w is h to m ak e. Note ❒ Up to 99 sets c an be se lected for an original. G G G G Press the [ OK ] key. H H H H Place one original on the expo- sure glass or in the optional docu- ment feeder. I I I I Press the { { { { Start } } } } key. J J J J Check the image posit[...]

Operation 64 1 Combine Originals You can combine original s in two ways: ❖ ❖ ❖ ❖ 2 single-sided original s → → → → 1 si ngle-sided print wi th 2 images Combine two single-sided originals onto one single-sided print with the two images placed side-by-side. ❖ ❖ ❖ ❖ 2 single-sided original s → → → → 1 si ngle-sided prin[...]

Combine Originals 65 1 ❖ ❖ ❖ ❖ Metr ic version ❖ ❖ ❖ ❖ Inch version ❒ The following tables list the combinations that can be used with the Combine feature (2 single-sided originals → 1 single-sided pri nt with 4 images). ❖ ❖ ❖ ❖ Metr ic version ❖ ❖ ❖ ❖ Inch version Original Size A4 K B5 K A5 K B6 K A6 K Pape r Si[...]

Operation 66 1 ❒ If a suitable reproduction ratio is n ot selected, images m ight not co mpletely appear on prints. ❒ Originals reading from left to right. Reference When you use the optional docum ent feeder with this function, see p.129 “ Combine Printing ” . A A A A Place the first original face down. Note ❒ When you place an original [...]

Combine Originals 67 1 C C C C Check the print paper size and the reproduction ratio. Note ❒ To have the machine choose a suitable ratio automatically, use Auto Mag- nification mode. See p.31 “ Auto Magnification ” . D D D D Press the { { { { Combine } } } } key. E E E E Select [ Combin e 2 ] or [ Quadruple ] with the [ ← ← ← ← ] [ ?[...]

Operation 68 1 H H H H The beeper s ounds after the first original has b een stored. Pla ce the second original face down. I I I I Press the { { { { Start } } } } key. J J J J Check the image position on the trial or proof pr int. Note ❒ If the image position is not correct, adjust it using the [ Image = = = = ] key. See p.24 “ Adjusting the Po[...]

Auto Combine Mode 69 1 Auto Combine Mode Preparation To use this function, you have to sele ct Auto Comb ine mod e with the user tools. See “ Combine ” on p.146 “ 4. Mode Setting ” . You can have images duplicated in two ways : ❖ ❖ ❖ ❖ 1 single-sided original → → → → 1 singl e-sid- ed print of 2 ima ges The original image is[...]

Operation 70 1 F F F F Press the [ OK ] key. G G G G Press the { { { { Start } } } } key. H H H H Check the image position on the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key. See p.24 “ Adjust ing the Position of P rinted Im ages ” . I I I I Make y our prin ts.[...]

Skip Feed Printing 71 1 Skip Feed Printing You can increa se the tim e betw een prints using the { { { { Skip Feed } } } } key. By default, when one shee t of paper is fed, the drum rotates twice. Ho wever, you can se lect the number o f drum ro- tations. This gives you a chan ce to re- move prints one by one from the paper delivery tray or insert [...]

Operation 72 1 F F F F Check the image position on the trial or proof pr int. Note ❒ If th e ima ge posi ti on is not co r- rect, adjust it using the [ Im age = = = = ] key. See p.24 “ Adjust ing the Position of P rinted Im ages ” . G G G G Make y our prin ts. Note ❒ After printing is completed, the Skip Feed setting returns to the default [...]

Programs 73 1 Progra ms You can store up to 9 fre quently used print job settings in machine mem ory and recall them for future use. Note ❒ Stored programs are not cleared when you tu rn off the main s witch. ❒ Stored programs can not be delet- ed. If you wa nt to change a sto red program, overwrite it. Storing a Pro gram A A A A Make the prin [...]

Operation 74 1 Protecti ng a Progra m If you want to prevent someone from writing over your program, do the following: A A A A Press the { { { { Program } } } } key. B B B B Select [ Prote ct ] with the [ → → → → ] or { { { { } } } } } } } } key. C C C C Press the [ OK ] key. D D D D Select the program number you want to pr otect w ith the [...]

Programs 75 1 D D D D Select the program number you want to remo ve pro tection from with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ Already protected program num- bers are shown with a black back- groun d (e.g . A ). ❒ You can also select the p rogram number with the number keys.[...]

Operation 76 1 Security Mode This function prevent s others from mak- ing prints of confidentia l documents from the master. For example, if you want to p rint some do cuments wi th sen- sitive in formation , use this func tion after making your p rints so that nob ody can access that master again. A A A A Make y our prin ts. B B B B Press the { { [...]

Quality Start Mode 77 1 Quality Start Mode If the machine is not u sed f or a lo ng period of tim e or you chang e the color drum unit, the ink on the dr um m ight dry causing prin t quality to deterio- rate. To solve this problem, you can ha ve t he m ach in e ca rry ou t a fe w id le spins of the dru m before a print run. This will restore image [...]

Operation 78 1 C C C C Press the { { { { Start } } } } key. The drum uni t idles. D D D D Make y our prin ts.[...]

Job Separation 79 1 Job Separation The print on the top of each print set in the paper delivery tray is pulled by the job separator. This function is useful when you make two or more print sets. R CAUTION: Limita tion ❒ In Job Separation mode, the following limitations apply. ❖ ❖ ❖ ❖ Metr ic version ❖ ❖ ❖ ❖ Inch version Note ❒ W[...]

Operation 80 1 A A A A Press the { { { { Job Separator } } } } key. B B B B Make y our prin ts. Note ❒ After the last page of each print set is fed ou t to the paper delivery tray, the job separator pulls the last sheet of each group in Job Separation mode. The next job separation begins. Skip Feed Edge Erase Over la y Make-Up Stamp Image Density[...]

Conserving the Master 81 1 Conserving the Master The machin e automatically ch anges the master len gth depending on the paper size you us e. Thi s sa ves bot h mast er a nd in k. a = Images on the master b = Masters c = Conserved area Limita tion ❒ The optional document feeder is required. Note ❒ This functi on is turned on when you use A4 K ,[...]

Operation 82 1 Double Feed When two or more shee ts of paper feed at once, the machine stops and a warning message ap pears on the pan- el display. Preparation To use the double feed function, select “ On ” fo r the “ Doub le Feed Warng ” with the user to ols. Se e p.146 “ 4. Mode Setting ” No.28. Note ❒ Double Feed functio n may not [...]

On Line Printing 83 1 On Line Printing On Line printing allows you to u se this machine as a PC printer. Limita tion ❒ The optional PC controller is re- quired. Note ❒ Before printing on to A5 K , 5 1 / 2 " × 8 1 / 2 " K , or non-standard size pa- per, you need to select the paper size with the [ Pnt.Size ] key. ❒ When pr inti ng o[...]

Operation 84 1 Auto On Line You can sele ct wh eth er t he m ach ine auto mati call y switch es to On Line m o d e w h e n i t r e c e i v e s d a t a f r o m a PC. Preparation • The default settin g for On Line m o d e i s O n . H o w e v e r , y o u c a n change the setting to Off if re- quired. • You can pr ess the { { { { Auto On Line } } }[...]

Image Rotation 85 1 Image Rotation When your orig inal setting directi on is different from the p aper direction, the machine automatically rotates the original image by 90 ° to ma tch the paper di- rection. Note ❒ The following tables list the combinations that can be used in Image Rotation mode. ❖ ❖ ❖ ❖ Metric vers ion ★ : The machin[...]

Operation 86 1 Make-up Printing Features M a k e - u p m o d e e n a b l e s y o u t o d o m o r e t h a n j u s t m a k e a n e x a c t c o p y o f t h e o r i g - inal. A variety of editing and image processing fu nctions allow you to q uickly and easily customize your prints. Main Feat ures Command sheets allow you to cr eate special effects wit[...]

Make-up Printing Features 87 1 6. Solid mode (Image Pattern mode) 7. All Page Patter n mode (Area Patter n mode) 8. All + Outline (Image Out- line and Area Pat tern mode) Mode Sample Design ated A rea Com mand sh eet/Or igi nal (Closed ar ea meth od) Prin t BALLET BALLET LUNCH MENU LUNCH MENU CA T CA T[...]

Operation 88 1 Make-up Modes fo r Outsid e Designated Areas Note ❒ In Mak e-up mode, comma nds mus t be giv en f or bot h desi gnate d are as an d areas outside the designated areas . Mode Sample Undesi gnated Area Comm and sh eet/Or igina l Print 1. Letter mode: The area out- side de signa ted are as is printed in L etter mode. 2. Photo mode: Th[...]

Make-up Printing Features 89 1 Background Pat terns A total of 164 background patterns is avai lable in Make-up mode: • 40 basic patter ns • 40 patterns similar to the basic p atterns but with pat terns elements at 4 times the siz e. • 80 variants based on 90 ° rotations of all the basic and enlarged p atterns. • 4 registered user patte rn[...]

Operation 90 1 Command Sheets for Make-Up Printing Command sheets are fed first so that the machine can recognize the areas of the original which are to be edited as designated areas. Command Sheets The command sheet i s a sheet of paper designatin g the areas to be edited. Com- mand sheets must be made on white or translucent paper , and should be[...]

Command Sheets for Make-Up Printing 91 1 • There is no limit to the number o f areas you can designate on a single com- mand sheet. • If designated areas on tw o or more command sheets overlap, th e last com- mand sheet will apply to the overlapping portion. • If you use Outline mode for letter im ages with a thickness of less than 3mm, 0.12&[...]

Operation 92 1 Diagonal line method Note ❒ A diagonal line must be drawn through the area th at you wish to edit. A A A A Put the command sheet on top of the original. The des ignated area is su r- rounded b y 3 side s of anothe r designa ted are a. Make a space of at least 2mm, 0. 08" in front of the area surrounded by 3 side s (rel ati ve [...]

Command Sheets for Make-Up Printing 93 1 B B B B Draw a line using a felt tip pen (black, red or blu e) with a thickness of at least 1mm. Note ❒ Make sure there is no break in the li ne. ❒ The diagonal line ca n be drawn from left to right or vice versa. ❒ Draw the line at least 2mm, 0.08", away from the image so that the whole image can[...]

Operation 94 1 Closed ar ea method Note ❒ The line designa ting the area must be a clos ed loop. A A A A Put the command sheet on top of the original. B B B B Using a bl ack, red, or bl ue felt tip pen, draw a line around the area to des- ignate. The line should have a thickness of at least 1mm. Note ❒ Make sure there is no break in the li ne. [...]

Command Sheets for Make-Up Printing 95 1 ❒ The line marking the designated ar ea should be more than 2mm, 0.08", from any neighboring image. a = 2mm, 0.08" b = Neighboring image c = Line ma rking the designat ed ar ea d = Imag e with in the d e sign ate d ar ea Command Sheet s and Fi nished Prints The following illu strations will help [...]

Operation 96 1 ❖ ❖ ❖ ❖ Drawing a command sheet using a closed line The closed line method is easier to use for complex areas, but it is les s precise. It also takes longer to draw a command sheet with the cl osed line method. fruit[...]

Make-up Printing 97 1 Make-up Printing A A A A Press the { { { { Make-U p } } } } key. B B B B Make s ure tha t [ 1 ] is se lected. Then press t he [ OK ] key. C C C C Select the frame shape with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. D D D D Press the [ OK ] key. E E E E Select the mode[...]

Operation 98 1 I I I I Press the [ OK ] key. Note ❒ Follow steps B – I for the other command sheets. ❒ You c an select a p attern regis- tered with th e user tools for only one co mmand sheet. ❒ To change the value entered, press t he { { { { Clear/St op } } } } key and enter the new value. J J J J After yo u have finis hed des ignat- ing m[...]

Make-up Printing 99 1 N N N N Press the [ OK ] key. O O O O Place the first command sheet face down on the exposu re glass and press the { { { { Start } } } } key. The beep er sounds after the com- mand sheet is scanned. Note ❒ Repeat step O for the other com- mand sheet s. P P P P Place the original face down on the exposure glass or face up int[...]

Operation 100 1 Make-up Samples - - - - Sample 1 A Command Sheet No. 1, Frame shape , Designated area: Delete Area mode B Outsid e area : Letter m ode C Print 1. Original 2. Command sheet No.1 3. Print 1 2 3 ZM-50[...]

Make-up Samples 101 1 - - - - Sample 2 A Command Sheet No. 1, Frame shape/, Designated area: All + Outline No. 30 B Command Sheet No. 2 Frame shape , Designated area: All page pattern No. 17 C Outs ide are a: F n1 D Print 1. Original 2. Command sheet No.1 3. Command sheet No.2 4. Print 1 2 3 4 ZM-51[...]

Operation 102 1 - - - - Sample 3 A Print the original as it is B Change the drum unit for color printing C Command Sheet No. 1, Frame shape , Designated area: All page pattern No. 3 9 D Outsid e area : Letter m ode E Print 1. Original 2. Command sheet No.1 3. Print 1 2 3 ZM-52[...]

Original Storage 103 1 Original Storage You can s tore freq uently used origi- nals in machine memory and then easily recall them later to make prints whenever they are need ed. Preparation • You can sto re up to 8 Original Storag e setting s in m achine memor y. • The number of Original Storage settings you can store de pends on the type of or[...]

Operation 104 1 E E E E Place the origina l on the expos ure glass as shown, then press the { { { { Sta rt } } } } key. Note ❒ If print images for an original have already been stored in ma- chine memory, check the stored images and cho ose whether to overwrite them or not. To over- write the images, press the [ Yes ] key. To keep the images, pre[...]

Original Storage 105 1 Selectin g Stored Origi nals To select the images of originals that have been stored in machi ne memo- ry, do the following: A A A A Press the { { { { Original Storage } } } } key. B B B B Select [ Se lect ] with the [ ← ← ← ← ][ → → → → ] or { { { { ~ ~ ~ ~ } } } }{ { { { } } } } } } } } keys. C C C C Press t[...]

Operation 106 1 F F F F Press the [ OK ] key. Removing Origina l Protection A A A A Press the { { { { Original Storage } } } } key. B B B B Select [ Prote ct ] with the [ → → → → ] or { { { { } } } } } } } } key. C C C C Press the [ OK ] key. D D D D Press the [ Ca ncel ] key. Deleti ng Stor ed Ori ginals I f y o u w a n t t o d e l e t e t[...]

Original Storage 107 1 D D D D Select the [ Yes ] or [ No ] key. Note ❒ Press the [ No ] key if you do not wish to d elete the Stored Origi- nal. TPES580E[...]

Operation 108 1 Image Overlay Th e ma chi ne c an m erg e two di ffer en t originals onto the same print paper. Two types of merging are available : ❖ ❖ ❖ ❖ Overlay Two different originals are merged onto the s ame pr int pape r. ❖ ❖ ❖ ❖ Format The image of the original whi ch is copied first will b ecome the back- ground image for [...]

Image Overlay 109 1 C C C C Press the [ OK ] key. Note ❒ If the one of the stored originals already chosen, the display in step C does not show. Skip to step D . D D D D Press the [ OK ] key. E E E E Place your originals, and the n press the { { { { Start } } } } key. On Line Overlay A A A A Press the { { { { On Line } } } } key. B B B B Press th[...]

Operation 110 1 D D D D Place your originals, and the n press the { { { { Start } } } } key. Placing o rigin als on the exposure glass A Place the first original on the exposure glass. B Press the { { { { Sta rt } } } } key. Note ❒ When you s elect [ Format ] in step B , the orig inal for t he template should be placed fir st. ❒ To cha nge th e[...]

Date Stamp 111 1 Date Stamp Use this function to have the date stamped on print s. Preparation Before you use this function, yo u have to set the machine's internal clock with the us er tools. See p.156 “ 1-6 Time Setting ” . Limita tion ❒ The font size of the date cannot be chang ed. ❒ I f y ou s e l e c t P ag e S t a m p a n d D a t[...]

Operation 112 1 B B B B Make su re t hat [ Dat e ] is selected. C C C C Press the [ OK ] key. D D D D Select the desired p osition and di- rection w ith the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. E E E E Press the [ OK ] key. F F F F Select the [ Yes ] or [ No ] key. Note ❒ Press the [ Ye [...]

Page Stamp 113 1 Page Stamp Use this function to have page num- bers stamped on prints. Thre e numberin g forma ts are av ail- able: • P1, P2,....., P5 • 1/5, 2/5,....., 5/5 • -1-, -2-,....., -3- Limita tion ❒ The size and font of Page Stamp cannot be changed. ❒ I f y ou s e l e c t P ag e S t a m p a n d D a t e Stamp togethe r, the last[...]

Operation 114 1 E E E E Press the [ OK ] key. If you selected [P1,P2 ] or [-1-,-2-] A Enter the first page n umber with th e [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ You can als o ente r the pa ge number with the numb er keys. ❒ To change the value entered, press the { { { { Clear/S[...]

Page Stamp 115 1 I I I I Place your original, an d then press the { { { { Start } } } } key. Placing you r origina ls ( K ) on the exposure gl ass A Place the first original a s shown in the illustration. Note ❒ Repeat s tep I for the other originals. Placing yo ur origin als ( K ) in the optiona l documen t feeder A Place your originals as sh ow[...]

Operation 116 1 Stamp One of the following 3 messages can be stamped o n prints. CONFIDENTIAL PRIORITY PRELIM INAR Y Limita tion ❒ Onl y on e me ssa ge c an b e st am ped at a time. Note ❒ You can ch ange some Stamp set- tings (size, density, or position) with the user to ols. See “ Size ” , “ Stamp Densi ty ” , “ Stamp P osi- tion ?[...]

Stamp 117 1 H H H H Select the stamp position with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. I I I I Press the [ OK ] key. J J J J Select the [ Yes ] or [ No ] key. Note ❒ Press the [ Ye s ] key if you w ish to s et th e oth er Sta mp modes . K K K K Place your original and p ress the { {[...]

Operation 118 1 Memory Combine You can combine original s in four ways: ❖ ❖ ❖ ❖ 4 single-sided original s → → → → 1 si ngle-si ded p rint of 4 image s 4 one-sided pages are p rinted onto 1 one-si ded sheet, 4 original images on one side. ❖ ❖ ❖ ❖ 8 single-sided original s → → → → 1 si ngle-si ded p rint of 8 image s 8[...]

Memory Combine 119 1 ❖ ❖ ❖ ❖ 8 single-sided original s → → → → 1 si ngle-si ded p rint of 8 image s ❖ ❖ ❖ ❖ 16 singl e-side d orig inals → → → → 1 single- side d print of 16 imag es Limita tion ❒ To use “ 16 one-sided originals → 1 one-sided print of 16 images ” mode, the optional document feeder is requ ired[...]

Operation 120 1 ❒ You can s et the mach ine to cancel Memory Comb ine m ode after finishing your print job with the user tools. See “ Cancel Co mb. ” on p. 146 “ 4. Mode Set- ting ” . ❒ Refer to the following table when you selec t the original and paper sizes. ❖ ❖ ❖ ❖ Placing originals in the optional document feede r (metric v[...]

Memory Combine 121 1 ❖ ❖ ❖ ❖ Placing originals on the ex posure glass (inch v ersion) *1 You can use these original and pap er sizes in Combine 4, 8 Origin als mode. *2 You can use these original and paper sizes in Combine 4 Origi nals mode. A A A A Press the { { { { Combine } } } } key. B B B B Select [ Memory C ombine ] with the [ → →[...]

Operation 122 1 F F F F Place your originals. Placing yo ur origi nal ( K ) on the exp osure glas s A Place your original as shown in the illustration. Placing yo ur origin als ( K ) i n the opt iona l docum ent feed er A Place your originals as show n in the illustration. Note ❒ The first original should be on the top. ❒ To avoid originals mis[...]

Memory Combine 123 1 G G G G Press the { { { { Start } } } } key. Note ❒ Even if the number of originals is less than the number required in the se- lected mode, prints can be made as shown in the illustration. In this case, press the { { { { q q q q } } } } key after all the originals have been scanned. ❒ When placing an original on the expos [...]

Operation 124 1 ❖ ❖ ❖ ❖ Example: copying A4 L L L L originals onto A3 L L L L paper. ❖ ❖ ❖ ❖ Example: copying A5 L L L L originals placed in the optional document feeder ont o A3 L L L L paper. ❖ ❖ ❖ ❖ Example: copying 8 1 / 2 " × × × × 11" K K K K originals onto 11" × × × × 17" L L L L pap er. ?[...]

Memory Combine 125 1 A A A A Press the { { { { Combine } } } } key. B B B B Select [ Memory C ombine ] with the [ → → → → ] or { { { { } } } } } } } } key. C C C C Press the [ OK ] key. D D D D Select [ Repeat ] with the [ → → → → ] or { { { { } } } } } } } } key. E E E E Press the [ OK ] key. F F F F Select the reproduction ratio. [...]

Operation 126 1 G G G G Set your origin al. Placing yo ur origi nal ( K ) on the exp osure glas s A Place your original as shown in the illustration. Placing yo ur origin als ( K ) i n the opt iona l docum ent feed er A Place your originals as show n in the illustration. Note ❒ To avoid originals misfeeding, fan the originals before placi ng them[...]

127 2. Optional Functions Optional Document Feeder Insert a stack of origi nals in the docu- ment feeder. It will be fed automati- call y. Origina ls Placing the following originals in the document feeder m ight cause mis- feeds or damage to the originals. Place the following kin ds of originals on the exposure glass: • Originals heavier than 128[...]

Optional Functions 128 2 The first 8mm, 0.32" , of the leading edge and the last 2mm, 0 .08" of the trailing edge cannot be printed. Make sure the leading edge margin is at least 8mm, 0.32", and the trailing edge margin is at least 2mm, 0.08". Do not stack originals above the limit mar k. Placing Origi nals A A A A Adjust the gu[...]

Optional Document Feeder 129 2 Combine Printing Reference See p.64 “ Combine Origi nals ” for details. A A A A Insert the two originals face up. Note ❒ The first original will be printed on the left side of the paper. ❒ To avoid originals misfeeding, fan the orig inals before placing them in the document feeder. B B B B Enter the number of [...]

Optional Functions 130 2 ❒ If you place on ly one original, the beeper sounds after the first original has been scanned i n. Place the se cond original an d any pr int se tting s you requi re. Then press the { { { { Start } } } } key. Manual Class Mode with Tw o or More Originals Reference See p.59 “ M anual Class Mode with two or More Original[...]

Optional Document Feeder 131 2 Note ❒ To avoid originals misfeeding, fan the orig inals before placing them in the document feeder. ❒ The originals are fed from the top of th e stack. Mak e sure that the originals are placed in the correct sequence with the first on th e top . J J J J Press the { { { { Start } } } } key. K K K K Check the image[...]

Optional Functions 132 2 Color Printing Using the Optional Color Drum Col or dr um u nit s are av ai lab le as op- tions in addition to the standard black unit. For mak ing color print s, a sepa- rate drum unit is necessary for eac h color. Note ❒ If the ink on the color drum dries, use the Quality St art mode. Se e p.77 “ Quality Start Mode ?[...]

Color Printing Using the Optional Color Drum 133 2 C C C C Pull the drum unit hand le out slowly (B2). D D D D Lift the upper dr um stay (B3) a lit- tle to un lock th e drum unit, and then pull out the drum unit while holding the drum unit h andle (B2) and the upper drum stay (B3). Important ❒ Be careful not to let the drum unit fall. E E E E Mak[...]

Optional Functions 134 2 I I I I Lift drum u nit lock lever (B1). J J J J Close the front door. Note ❒ Make sur e th at the Open Cov- er/U nit ind icator turns off, and the Color Drum indic ator turns on. Printi ng in Two Colo rs After p rinting in one color, you can print i n anoth er color on th e same side of the print. Note ❒ Let the ink on[...]

Color Printing Using the Optional Color Drum 135 2 E E E E Press the { { { { Print } } } } key. F F F F Remove the prints from the paper deli ver y tray an d plac e the m on the pa per feed t ray again as shown in the illustration. G G G G Change the drum unit. See p. 132 “ Changing the Color Drum Unit ” . H H H H Place the seco nd original and[...]

Optional Functions 136 2 Changing the Drum Size To save costs on mast er rolls and ink, you can sh orten the length of each master by changing to an optional smaller drum. Printi ng Area (At 23 ° ° ° ° C/73 ° ° ° ° F, 65% RH) ❖ ❖ ❖ ❖ Metric vers ion ❖ ❖ ❖ ❖ Inch version Master Cu t Length A3 drum … 320mm × 530mm , 12.5&qu[...]

137 3. Combination Chart Combination Chart This com bination chart shows whi ch modes can be used to gether. ✩ means that these modes can be used together . X means that these modes cannot be used together . *1 means that these modes ca nnot be used t ogether (the function chosen sec- ond takes priority) *2 means that these modes ca nnot be used [...]

Combination Chart 138 3 Function specified earlier Directional Magnifica- tion (%) ✩✩✩ *1 *1 *1 -- *1 ✩✩✩✩✩✩✩✩✩✩ ✩✩✩✩✩ ✩✩✩✩ *1 ✩ *1 Directional Magnifica- tion (size) ✩✩✩ *1 *1 *1 *1 -- ✩✩✩ ✩✩✩✩✩ ✩✩✩✩✩✩✩ ✩✩✩✩ *1 ✩ *1 Combine Originals (2 Images on one sheet)[...]

Combination Chart 139 3 Function specified earlier Class mode ✩✩✩✩ ✩✩✩✩✩✩✩ ✩✩✩ *1 *1 *1 -- ✩✩✩✩✩ ✩✩✩✩✩ ✩ *1 Job S epara- tion ✩✩✩✩✩✩ ✩✩✩✩✩ ✩✩✩✩✩✩✩ -- ✩✩ *1 ✩✩✩✩ ✩✩✩✩ Overlay ✩✩✩✩✩✩✩✩ *2 *2 *2 *2 *2 ✩✩✩✩✩✩ -- *1 *1 *2[...]

Combination Chart 140 3[...]

141 4. User Tools Accessing the User To ols The user tools allow you to customize various default settings. This section is intended for the machi ne adminis- trator. A A A A Press the { { { { User Tools } } } } key. B B B B Select the desir ed user tool s menu. See p.143 “ User Tools Menu ” . Usin g the { { { { ~ ~ ~ ~ } } } } , { { { { } } } [...]

User Tools 142 4 C C C C Change the setting s by following the instructions on the panel d is- play, and then pres s the [ OK ] key. Note ❒ To change the value entered, press the { { { { Clear/Stop } } } } key before pressing the [ OK ] ke y. Th en en- ter the new value. ❒ [ Cancel ] : Press to return to th e prev ious me nu wit hout ch ang- in[...]

User Tools Menu 143 4 User Tools Menu Reference For accessi ng the user tools, see p.141 “ Acces sing the Use r Too ls ” . 1. Syste m No. Mode Description 1 Auto Reset The machine returns to its initial condition automatically after your job is finished. The automatic reset time can be s et from 1 to 5 minutes or off (0 minutes). Note ❒ Defau[...]

User Tools 144 4 2. Set Operat'n Mo de 7 Data Print Use to print ou t the following data. Note ❒ Avai lable sett ings: • Log Data (Number of prints ma de, how many times paper misf eeds occ ur and so on.) • Reset Counters (Number of prints and master made under ea ch use r cod e.) • Store Class (Regis tered number of students in each c[...]

User Tools Menu 145 4 3. Init ial Settin g No. Mode Description 1 Paper Type Specifies the paper type a t power on. Note ❒ Defa ult: Std. (Standard) 2 MSTR Makg. Dens it y Specifies the image density a t power on. Note ❒ Defa ult: Std. (Standard) 3 Original Priority Specifies the original mode at power on. Note ❒ Defa ult: Letter 4R e p r o d[...]

User Tools 146 4 4. Mode Set ting 8 Photo Contras t Specifies the contrast level for Photo when th e power is switched on or after mode se ttings are clea red. Note ❒ Defa ult: Standard 9 Photo(Screen) Specifies the screen image in Photo mode when you press the [ Original ] key. Note ❒ Defa ult: Standard 10 Eco. Mode ON/ OFF Specifies whether E[...]

User Tools Menu 147 4 5 No Orig. Size When you place originals of non standard sizes on the exposure glass, set original detection to “ Ignore ” . The machine will not de- tect the original size. Note ❒ Default: Not to ignore 6 Background ON/OFF When you make prints in Photo, Lette r/Photo, or Tint mode, the background of the prints might bec[...]

User Tools 148 4 10 Cancel Co mb. Specifies whether Combine Originals or Memory Combine mode is cleared a fter finishing yo ur print job. Note ❒ Default: Not to cancel 11 No. of Skip Feed Specif ies the number of dr um rotations in Skip Feed mode at power on. You can also select whether you can change the num- ber of drum rotat ions temporarily w[...]

User Tools Menu 149 4 15 Deflector Angle You can change the angle of the wing guide depending on the pa- per type you use. Note ❒ Default: Auto ❒ Avai lable sett ings: • Up (Select this setting when stan dard thickness or thin pa- per misfeeds a t the paper exit sect ion occur frequently.) • Down (Select t his setting when A4 – B 5, 8 1 /[...]

User Tools 150 4 20 Auto Rotation When the direction in which your o riginal is placed differ s from that of the paper , the machine automatically ro tates the original image by 90 ° to match the paper direction. You can cancel this setting. Note ❒ Default: ON 21 Master length The machine determines the master length according to the num- ber of[...]

User Tools Menu 151 4 5. Stamp No. Mode Descripti on 1 Type You can select the stamp mess age at power on with the Stamp mode. Note ❒ Default: CONFIDEN TIAL 2 Size You can edit t he preset stamp s izes. Note ❒ Default: Standard ❒ Adjustm ent val ues: • Double size 3 Stamp Densit y You can select the style of the stamps. Note ❒ Default: So[...]

User Tools 152 4 8 Type(Page) You can select the page numbering style at power on in Pa ge Stamp mo de. Note ❒ Default: P1, P2 9 Direction(Page) You c an select the page numbering direction at power on i n Page Stamp mo de. Note ❒ Default: • When you select “ P1, P2 ” or “ 1/5,2/ 5 ” with the “ Type(P age) ” user tool: Upper R igh[...]

User Tools Menu 153 4 6. Admini strator Mo de ❖ ❖ ❖ ❖ User Codes If user codes are turned on, operators must enter their user codes before they can operat e the machine. The machine keeps count of the number of copies made under each us er code. Turn this function on with t he “ Set Use r Code(s ) ” user tool. You ca n also turn on Key [...]

User Tools 154 4 7. On Line Mode 6 Del. User Code You can delete user codes. Note ❒ The number of copies m ade under the deleted code is a lso deleted. Reference For deleting user codes, see p.168 “ 6-6 Del. Us er Code ” . 7 Key Operator Code Use to turn Key Ope rator Code mode on or off. Note ❒ Default: No t to use 8R e g / C h g K e y - O[...]

User Tools Menu 155 4 5 IP Address Sets the IP Address. Note ❒ Defa ult : 011 .022. 033.044 Reference See the Printer Re ference 1 for informat ion about the IP A d- dress setting. 6 Ethernet Speed Sets the Ethernet communication speed. Note ❒ Defa ult : Au to 7 Network Sets the Network boot. Note ❒ Defa ult : NON E Reference See the Printer [...]

User Tools 156 4 User Tool Menus in Detail 1-6 Time Setting A A A A Press the { { { { User Tools } } } } key. B B B B Make su re th at “ 1 ” is se lected, and th en pr ess the [ OK ] key. C C C C Enter 6 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D D D D Enter the year with the nu mber keys. E E E E Press t[...]

User Tool Menus in Detail 157 4 B B B B Enter 3 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C C C C Enter 4 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D D D D Select the ratio you want to adjust with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { [...]

User Tools 158 4 F F F F Select the class with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. G G G G Enter the number of s tudents with the number keys, and then press the { { { { q q q q } } } } key. Note ❒ Repeat steps F an d G until you have finished r egistering the number of stud ents in[...]

User Tool Menus in Detail 159 4 F F F F Adjust the erase edge margin. If you selecte d A3 to A6 o r 11" × 17" to 5 1 / 2 " × 8 1 / 2 " A Adjust the erase edge margin with th e [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ You can als o enter the ratio with the num ber[...]

User Tools 160 4 E E E E Change the nu mber of drum rota- tions while one sheet of paper is fed with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. Note ❒ You can also chan ge the num- ber of rota tio ns w ith the nu m- ber keys. F F F F Press the [ OK ] key. 4-14 No. of Q.star t Note ❒ The [...]

User Tool Menus in Detail 161 4 F F F F Select the time period (hours) the drum unit idles for with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. G G G G Press the [ OK ] key. H H H H Select the number of drum rota- tions with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } }[...]

User Tools 162 4 5-4 Stamp Position Note ❒ The default position an d available settings of each s tamp are a s fol- lows. A A A A Press the { { { { User Tools } } } } key. B B B B Enter 5 with the nu mber keys, and then pres s the [ OK ] or { { { { q q q q } } } } key. Stamp positions Default A vailab le settings a = 24m m, 0.96" b = 24mm, 0[...]

User Tool Menus in Detail 163 4 C C C C Enter 4 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D D D D Select the stamp position you want with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { { { { } } } } } } } } keys. E E E E Press the [ Cha nge ] key. F F F F Adjust the ho rizontal stamp [...]

User Tools 164 4 B B B B Enter 5 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C C C C Enter 7 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D D D D Select the date stamp position you w ant to adju st with the [ ← ← ← ← ] [ → → → → ] or { { { { ~ ~ ~ ~ } } } } { {[...]

User Tool Menus in Detail 165 4 A A A A Press the { { { { User Tools } } } } key. B B B B Enter 5 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C C C C Enter 10 with the number keys. Then press t he [ OK ] or { { { { q q q q } } } } key. D D D D Select the page numbering direc- tion you want to adju st with the [ [...]

User Tools 166 4 C C C C Enter 11 with the number keys, and then press the [ OK ] or { { { { q q q q } } } } key. D D D D Select the backgr ound pat tern with the { { { { ~ ~ ~ ~ } } } } , { { { { } } } } } } } } , { { { { | | | | } } } } , or { { { { { { { { } } } } key. E E E E Press the [ Cha nge ] key. F F F F Move the cursor to the position yo[...]

User Tool Menus in Detail 167 4 D D D D Keep pressing the [ → → → → ] or { { { { } } } } } } } } key to display the num ber of masters and p rints mad e un der your user code . E E E E Press the [ OK ] key after checking the number of masters and print s made under yo ur user code. 6-2 Reset Counters A A A A Press the { { { { User Tools } }[...]

User Tools 168 4 6-5 Chg. User Code A A A A Press the { { { { User Tools } } } } key. B B B B Enter 6 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. C C C C Enter 5 with the number k eys, and then press the [ OK ] or { { { { q q q q } } } } key. D D D D Keep pressing the [ → → → → ] or { { { { } } } } } } }[...]

User Tool Menus in Detail 169 4 D D D D Keep pressing the [ → → → → ] or { { { { } } } } } } } } key to display you r user co de. E E E E Press the [ OK ] key. F F F F Press the [ Yes ] key.[...]

User Tools 170 4[...]

171 5. Troubleshooting If Your Mac hine Does Not Operate as You Want If a malfunction or a misfeed occurs, the following m essages will appear on the panel displ ay. Message Meaning Check the original di- rection. The paper is not placed in the same direction as the original. Place the original in the same direction as the paper. If you pres s the [...]

Troubleshooting 172 5 - - - - When a service call message is shown on the panel display Press the [ Exit ] key. Then turn the main switch off and back on again. If a service code appears again, contact your service re presentative. Note ❒ If a s ervice code appears on the panel display a fter you turn the main s witch off and on a few times, do n[...]

If You Cannot Make Prints as You Want 173 5 If You Cannot Ma ke Prints as You Want Combine Original s Mode Problem Cause Action Misfeeds occur frequently. Imp roper paper ty pe is select- ed. Select p roper paper type. See p.43 “ Printing onto Various Kinds of Pa per ” . When you try to s et several functions at a time, you can- not set some fu[...]

Troubleshooting 174 5 Loading Paper The Load Paper indica tor ( B ) lights when the paper feed tray runs out of paper. Limita tion ❒ Loa d pape r when the pa per fe ed tray is completel y empty. If you add paper when so me paper is left in the tray, it may cause multiple feeds or misfeeds. Reference For availab le paper sizes, see p.11 “ Print [...]

x Clearing Misfeeds 175 5 x x x x Clearing Misf eeds R CAUTION: Note ❒ After clear ing mi sfeeds, make su re that all the doors, covers , and units are closed and the x x x x indicator is off . ❒ To prevent misfeeds, d o not leave any torn scraps of paper, original s, or mas te rs in th e mac hin e. ❒ Wh en c lea rin g mi sf eed s, d o no t t[...]

Troubleshooting 176 5 • When paper edges stick together or paper is not fed in, fan the paper as shown. • When pri nting on to post cards or thick paper, lower the printing speed to setting 1 or 2. See p.27 “ Changing the Prin ting Speed ” . • When a multiple feed occ urs or the paper comes out skewed, make sure that the paper feed side p[...]

x Clearing Misfeeds 177 5 E E E E If you c annot r emove the misf ed paper, remove it from the paper feed tray. F F F F Set the drum unit and close the front door . Note ❒ For set ting th e drum u nit, see p.132 “ Changing the C olor Dru m Un it ” . - - - - To prevent paper misfeeds: See p.17 5 “” x + A ” Paper Mi sfeeds in the Paper Fe[...]

Troubleshooting 178 5 B B B B Lower dr um unit lock lever (B1). C C C C Take out the drum. Note ❒ For taking out th e drum unit, see p.132 “ Changing the Color Dru m Un it ” . D D D D Remove the misfed paper from the drum. E E E E If you c annot find mi sfed pap er around the drum (as in step D D D D ), check the pressure cylind er. Re - move[...]

x Clearing Misfeeds 179 5 F F F F Set the drum unit and close the front door . Note ❒ For set ting th e drum u nit, see p.132 “ Changing the C olor Dru m Un it ” . - - - - To prevent paper misfeeds: If the paper is curled or the original 's leading edge margin is too narrow, the following action is necessar y. • When you use curled pap[...]

Troubleshooting 180 5 D D D D Remove the master roll (2). E E E E Reset the master roll (1). Note ❒ The master roll must be p osi- tioned as shown in the illustra- tion in step F . F F F F Close the master tray cover (2). G G G G Position the master roll so that the edge reache s the i nterior of the master holder. H H H H Close the master guide.[...]

x Clearing Misfeeds 181 5 E E E E Set the drum unit and close the front door . Note ❒ For set ting th e drum u nit, see p.132 “ Changing the C olor Dru m Un it ” . ” x x x x + B + E ” Master Misfeeds in the Master Ej ect Sect ion A A A A Open the fr ont door. B B B B Lower dr um unit lock lever (B1). C C C C Take out the drum. Note ❒ Fo[...]

Troubleshooting 182 5 ” x x x x + E ” Master Misf eeds in the Mast er Eject Section A A A A Open the fr ont door. B B B B Grasp handle (E1) an d pull out the master eject unit until it stops. C C C C Check where t he misfed master is. Remove the misfed master. D D D D Return the master eject unit to its original position and close the front doo[...]

x Clearing Misfeeds 183 5 ” x x x x + P ” Or iginal Misfee ds Occur When Using th e Optional Do cument Feede r A A A A Open the document feeder (ADF) cover. B B B B Pull out the misfed o riginal gen- tly. C C C C If you cannot remove misfed orig- inals as in st ep B B B B , open the docu- ment feeder. D D D D Pull the green kn ob towards you an[...]

Troubleshooting 184 5 • Pasted originals • Originals written in pencil • Thin originals that ha ve low stiff- ness • Originals with index tabs • Transparent origina ls such as OHP transparen cies or transluc ent pa- per Note ❒ Do not mix di fferent sizes of orig i- nals in the opti onal do cum ent feeder. ❒ Remove staples or paperclip[...]

When the Open Cover/Unit Indicator ( M ) Lights 185 5 When the Open C over/Unit Indic ator ( M M M M ) Lights M Make sur e that th e foll owing doors/co vers are closed. ❖ ❖ ❖ ❖ Front door Close the front door c ompletely. ❖ ❖ ❖ ❖ Optional document feede r (ADF) cov- er Close th e documen t feeder ( ADF) cover until it locks in posi[...]

Troubleshooting 186 5 When the Add Ink Indicator ( j j j j ) Lights The Ad d Ink indicator ( j ) li ghts when it is time to supply ink. R CAUTION: R CAUTION: R CAUTION: R CAUTION: Note ❒ Be sure to supply ink of the same color as the current drum. ❒ Ink is easily removed from skin by waterless hand cleaners followed by wash- ing with soa p and [...]

When the Add Ink Indicator ( j ) Lights 187 5 C C C C Remove the used in k cartridg e. D D D D Remove the cap of th e new ink cartridg e. E E E E Insert the new cartridge into the ink holder. Note ❒ Always supply ink of the same color. F F F F Return the ink holder to its original position u ntil it clicks. G G G G Close the front door. The machi[...]

Troubleshooting 188 5 When the Master End Indic ator ( C C C C ) Lights The Master End indicator ( C ) lights when it is time to replace the master roll or when you need to s et the master roll. R CAUTION: A A A A Pull out the master tray until it stops. B B B B Op en t he mas ter gu id e. C C C C Op en t he mas ter tr ay cov er ( 1). D D D D Remov[...]

When the Master End Indicator ( C ) Lights 189 5 G G G G Position the master roll so that the edge reaches the interior of the master hold er. H H H H Close the master guide. I I I I Push in the master feed unit until it stops.[...]

Troubleshooting 190 5 When the Master Ej ect Indicator ( k k k k ) Lights The Mast er Eject indicator ( k ) lights when it is time t o empty the m aster eject unit or when you need to set the master eject unit. Note ❒ Ink is easily removed from skin by waterless hand cleaners followed by washi ng with soap and water. ❒ Be careful not to get any[...]

When Other Indicators Are Lit 191 5 When Other I ndicators Are Lit Indicator Meaning and a ction The key counter (option) is not set. Ins ert the key counter. • (Metric vers ion) • (Inch version) Color drum unit is installed. • (Metric vers ion) • (Inch version) A3/11 " × 17" drum unit is set. • (Metric vers ion) • (Inch vers[...]

Troubleshooting 192 5 When Prints Are Not Delivered in a Neat Stack When Printi ng on Small Size Paper A A A A Adjust the angle of t he end plate by turning the screw clockwise or countercl ockwi se. When the Machine Can not Detect the Paper Size If the paper size is not detected cor- rectly wh en printin g, prints might not be delivered in a neat [...]

Poor Printing 193 5 Poor Printing Dirty B ackground If the background of prints is dirty, the drum unit might be dirty. R CAUTION: R CAUTION: R CAUTION: Note ❒ To avoid getting d irty background prints when p rinting onto pap er smaller than the original image, select a suitable reduction ratio or use larger pri nt pa- per. ❒ When printing onto[...]

Troubleshooting 194 5 B B B B Pull out the drum u nit. Note ❒ For taking out the drum unit, see p.132 “ Cha nging the Color Drum Un it ” . C C C C While pressing the drum lock, turn the drum until you can see the trailing edge of the master. D D D D With a dry soft cloth, remove any ink that has accumulated on the trailing edge of the drum un[...]

Poor Printing 195 5 E E E E Turn the drum unit and lock it after cleaning. F F F F Insert the drum un it until it locks into position, and then lower the d rum unit lock lever. G G G G Close the front door. H H H H Turn on the main switch. TPEH091E TPEH021E[...]

Troubleshooting 196 5 Black Lines/St ained Prints Check the platen cover and clean it if dirty. See p .201 “ Cleaning the pl aten cov- er ” . Check the exposure glas s and clean it if dirty. See p.201 “ Cleaning the exposure glass ” . Check the sheet of the optional document feeder and cle an it if dirty. See p. 202 “ Cleaning the Sheet ?[...]

197 6. Remarks Do's and Don'ts R CAUTION: Important ❒ Make sure that the m m m m indicator on the PC controller operati on panel is off be- fore unplugging the power cord. • While printing, do not turn off the main switch. • While printi ng, do not unplug the po wer cord. • While printing, d o not open the door or covers. • Whil[...]

Rem arks 198 6 • If the printed p aper is stored for m ore than one da y, the paper may become wrinkled. If this paper is used , wrinkles may also appear on the master. If the paper will be stored for more than one day, store it in its original wrapping paper or other prot ective covering. • Shadowing may occur if the printed image at the re ar[...]

Where to Put Your Machine 199 6 Where to Put Your Machine Environment Your machine's location should be carefully chosen because environmental con- ditions greatly affect its performance. Optimum environmental condition s R CAUTION: R CAUTION: R CAUTION: • Temperature: 10 – 30 ° C, 50 – 86 ° F • Humidity : 20 – 90% RH • A stro ng[...]

Rem arks 200 6 Power Connec tion R WARNING: R CAUTION: R CAUTION: Make sure the plug is firmly inserted in the outlet. Machine Cl earance Place the machine nea r the power source, providing c learance as shown. ❖ ❖ ❖ ❖ Main fram e * Pape r del ive ry tray 1. More than 10cm, 4.0" 2. More than 60cm, 23.7" 3. More than 60cm, 23.7&quo[...]

Maintaining Your Machine 201 6 Maintaining Your Machine To maintain high print quality, cl ean the following parts and units regular- ly. ❖ ❖ ❖ ❖ Cleani ng th e mach ine Wipe the machine with a soft, d a m p c l o t h . T h e n w i p e i t w i t h a dry cloth t o remove the water. Important ❒ Do not use chemical cleaner or or- ganic solve[...]

Rem arks 202 6 Cleaning t he Optional Document Fe eder Cleaning the Sheet A A A A Lift the document feeder. B B B B Clean the sh eet with a damp clot h and wipe it with a dry cloth. Note ❒ If you do not clean the sheet, marks on the sheet will be print- ed. AM1D600[...]

203 7. Specifications Main Frame ❖ ❖ ❖ ❖ Configuration : Floo r sta ndin g (wit h cust om ta ble or cab inet) . ❖ ❖ ❖ ❖ Printing P rocess: Full automatic on e drum system ❖ ❖ ❖ ❖ Original Type: Sheet/Book ❖ ❖ ❖ ❖ Original Size: Maxi mum 30 5mm × 432mm, 12.0" × 17.0" ❖ ❖ ❖ ❖ Pixel Density: 600dpi ?[...]

Specifications 204 7 ❖ ❖ ❖ ❖ Printing Area: • A3 drum : • Inch version: More than 290 × 420mm, 11.4" × 16.5" • Metric version: More than 290mm × 410mm, 11.4" × 16.1" • A4 drum : More than 290mm × 200mm, 11.4" × 7.8" ❖ ❖ ❖ ❖ Print Paper Size : Maximum recommended: 297mm × 432mm, 11.6"[...]

Main Frame 205 7 ❖ ❖ ❖ ❖ Master Eject U nit Capa city: • A3 drum More than 70 masters • A4 drum 100 masters ❖ ❖ ❖ ❖ Dimensions (W × × × × D × × × × H) ❖ ❖ ❖ ❖ Weight: • Mach ine: Less than 105kg, 231.5 lb ❖ ❖ ❖ ❖ Noise Emissio n *1 Sound p ower level Sound p ress ure l evel *2 *1 The above measurements [...]

Specifications 206 7 ❖ ❖ ❖ ❖ Optional Equipment: • Drum unit: Color Drums Type 80(L) A3, 11" × 17 " Type 80(S) A4, 8 1 / 2 " × 11" • Key Counter • Document Feeder • PC Controller Note ❒ Specifications are subject to c hange with out notice.[...]

Document Feeder (Option) 207 7 Document Fe eder (Option) ❖ ❖ ❖ ❖ Original Type: Sheet ❖ ❖ ❖ ❖ Original Weight: 52.3g/m 2 to 127.9g/m 2 , 13.9 lb to 34 lb ❖ ❖ ❖ ❖ Original Size: Max. 297mm × 864mm, 11.7" × 34.0" Min. 149mm × 210mm, 5.9" × 8.3" ❖ ❖ ❖ ❖ First Copy Time (Master Process Time): Less[...]

Specifications 208 7 Editing Function Type 85 (Option) PC Controller (Option) Key Counter (Option)[...]

Twin Color Press Roller Printing System TC-II (Option) 209 7 Twin Co lor Pr ess Roller Pri nting S ystem TC-II (Option ) ❖ ❖ ❖ ❖ Configuration : Floo r sta ndin g (wit h cust om ta ble or cab inet) ❖ ❖ ❖ ❖ Printing P rocess: Twin color press roller printing s ystem ❖ ❖ ❖ ❖ Print Paper Size : Maxi mum: 297 mm × 432mm, 11.6&q[...]

Specifications 210 7 Consumables Note ❒ Specifications are subjec t to change withou t notice. Name S ize Rem ark s Master : Length: 140m, 52 0ft/roll Width: 320mm, 12 .6" 2 Rol ls/case A3 drum More than 255 maste rs can be made per roll A4 drum 410 ma sters can be ma de per roll Ink-Black 1,000ml/pack Environmental conditions: -5 to 40 ° C[...]

211 INDEX { ~ ~ ~ ~ }{ } } } } }{ | | | | }{ { { { { } , 6 16 s ingle-sided origin als → 1 single-sided print of 16 im ages , 118 1 single-si ded or iginal → 1 singl e-sid ed print of 2 images , 69 1 single-si ded or iginals → 1 single- sided print of 4 images , 69 2 single-si ded or iginals → 1 single- sided print with 2 images , 64 2 sing[...]

212 E Eco.Mode ON/O FF , 146 Econom y mode , 50 { Economy Mode } } } } key , 5 Edge Erase , 41 { Edge Er ase } } } } key , 5 Energy Saver mode , 22 Energy Saving , 144 envelopes , 44 environment , 199 erasing center and ed ge margins , 40 Error indicator (Red) , 7 Ethernet Speed , 155 Exit , 8 exposure glass , 3 Exposure gl ass cover , 3 F flip up [...]

213 N Netw ork , 155 Next , 8 No. of Q.start , 148 , 160 No. of Skip Feed , 148 , 15 9 No Orig. Si ze , 147 No Orig. Size D F , 146 Num ber k eys , 6 O OK , 8 { On Line } } } } key , 5 On Li ne Ove rlay , 108 On Li ne pri ntin g , 83 Open Cover/Unit Indicator ( M ) , 185 opera tion p anel , 1 , 5 optional document feeder , 127 opti ons , 4 , 20 6 ,[...]

214 special kin ds of paper , 44 specification s , 203 Stamp , 116 , 151 Stamp Density , 151 { Stamp } } } } key , 5 Stamp Posit ion , 151 , 162 standard paper , 43 standa rd pr inting , 19 { Start } } } } key , 6 stopp ing a multi-prin t run , 28 Storage Overlay , 108 stori ng a progr am , 73 System , 143 T thick paper , 43 Time Settin g , 143 , 1[...]

215 MEMO[...]

216 UE USA C244 MEMO[...]