Ricoh PJ S2130 manual

For saf e and correct use, be sure to read the “Usage Notice” bef ore using the projector. User’ s Manual[...]

English 1 English Table of Contents T able of Contents ............................ 1 Usage Notice .................................... 2 Precautions .........................................2 Safety Labels of This Machine ............6 Regulation & Safety Notices ...............7 Other Information .............................. 1 1 Introductio[...]

2 English Usage Notice Precautions Follow all warnings, precautions and maintenance as recom- mended in this user’s guide to maximize the life of your unit. ■ Warning- This apparatus must be earthed. ■ Warning- Do not look into the projector’s lens when the lamp is on. The bright light may hurt your eyes. ■ Warning- To reduce the risk of [...]

English 3 English Usage Notice ■ Warning- This product should be operated only from the type of power source which does not exceed the voltage range specied on the rating label and the power cord. If you are not sure of the type of power supply to your home, consult your sales representative or local power company. ■ Warning- Do not use the [...]

4 English Usage Notice ■ Caution- Unplug this product from the wall outlet and take the product to qualied service personnel if you encounter any of the following conditions: a) The power supply cord or plug is damaged. b) Liquid has been spilled, or objects have fallen into the product. c) The product has been exposed to rain or water. d) The[...]

English 5 English Usage Notice Do: ■ After unpacking this product, read the manual carefully, and follow all the operating and other instructions. ■ Turn off the product before cleaning. ■ Use a soft cloth moistened with mild detergent to clean the display housing. ■ Disconnect the power plug from AC outlet if the product is not being used [...]

6 English Usage Notice Safety Labels of This Machine 1 Do not block the air intake or exhaust. Doing so could cause a re due to internal overheating. Do not place your hands, face, or other objects near the air exhaust, the lamp cover or the bottom of the unit. Doing so could result in injury and/or damage the object. 2 Do not look into the lens[...]

English 7 English Usage Notice Regulation & Safety Notices This appendix lists the general notices of your Projector. Notice: Users in the United States of America FCC notice MODEL NAME: PJ S2130 / PJ X2130 / PJ WX2130 Warning: this product contains a chemical known to the state of California to cause cancer, birth defects or other reproductive[...]

8 English Usage Notice RESPONSIBLE P ARTY : Ricoh Americas Corporation 5 Dedrick Place, West Caldwell, NJ 07006 Phone: 973-882-2000 Notice: Shielded cables All connections to other computing devices must be made using shielded cables to maintain compliance with FCC regulations. Caution Changes or modications not expressly approved by the manufac[...]

English 9 English Usage Notice This product contains substances which are harmful to humans and the environment. • The lamp contains mercury. Please dispose of this product or used lamps in accordance with local regulations. Disposal Following information is only for EU-member states: The use of the symbol indicates that this product may not be t[...]

10 English Usage Notice Following information is only for EU-member states: [Disposal of batteries and/or accumulators] The crossed out wheeled dust bin symbol indicates that batteries and/or accu - mulators must be collected and disposed of separately from household waste. If the battery or accumulator contains more than the specied values of l[...]

English 11 English Usage Notice Other Information Copyrights to Images When projecting images using the projector, be careful not to infringe the copyright of protected materials. The following are examples that may infringe the copyright of protected materials. • Broadcasting images or movies for commercial purposes • Modifying images or movie[...]

12 English Introduction Product Features Outstanding features include:  ■ True PJ S2130 - SVGA(800 × 600)/ PJ X2130 - XGA(1024× 768)/ PJ WX2130 - WXGA(1280 × 800) addressable pixels ■ Single chip DLP ® technology ■ NTSC3.58/NTSC4.43/PAL(B/D/G/H/I/M/N)/ SECAM (B/D/G/K/K1/L) and SDTV(480i/576i), EDTV(480p/576p), HDTV(720p/1080i/1080p) co[...]

English 13 English Introduction Power Cord RGB Cable Wireless Remote Control Projector with lens cap Package Overview This projector comes with all the items shown below. Check to make sure your unit is complete. Contact your dealer immedi- ately if anything is missing.  Due to the differ- ence in applications for each country, some regions m[...]

14 English Introduction 1. Control panel 2. Zoom lever 3. Ventilation (inlet) 4. Speaker 5. Focus ring 6. Ventilation (outlet) 7. Infrared remote sensor 8. Lens 9. Lens cap 10. Connection ports 11. Adjustable feet Product Overview 1 7 3 8 9 5 4 6 2 6 3 10 11 11[...]

English 15 English Introduction Connection Ports 1. HDMI terminal 2. COMPUTER IN/COMPONENT IN terminal 3. S-VIDEO IN terminal 4. VIDEO IN terminal 5. SERVICE Port 6. MONITOR OUT terminal 7. AUDIO IN Jack 8. AC IN socket 9. Anti-theft lock hole 2 3 4 5 7 8 9 6 1[...]

16 English Introduction Control Panel 4 6 5 7 10 9 8 11 1 Lamp indicator Indicate the projector’s lamp status. 2 Temp indicator Indicate the projector’s temperature status. 3 Power indicator Indicate the projector’s status. 4 Power Refer to the “Power On/Off the Pro - jector” section. (See pages 22~23) 5 Volume - Decrease speaker volume. [...]

English 17 English Introduction Status Enter Compute r 1 Compute r 2 Video Menu A V Mute Freeze Key s tone Picture Aspect Eco Volume Pow er S-Video HDMI Input Auto Set Magnify Status Enter Compute r 1 Compute r 2 Video Menu A V Mute Freeze Key s tone Picture Aspect Eco Volume S-Video HDMI Input Aut o Set Magnify Remote Control 1 Infrared trans- mit[...]

18 English Introduction 7 ECO Dim the projector lamp which will lower power consumption and extend the lamp life. 8 Volume +/- Increase/decrease speaker volume. 9 Video Press “Video” to choose Video in terminal. 10 HDMI Press “HDMI” to choose HDMI in terminal. 11 Magnify Zoom in the projector display. 12 S-Video Press “S-Video” to choos[...]

English 19 English Introduction Remote Control Battery Installation Press rmly and slide the battery cover off. 1 Slip the cover back over the batteries until it snaps into place. Do not mix different types of batteries or new and old batteries. 3 Install new batteries (AAA/ R03). Ensure that you have the batteries’ polarity (+/–) aligned co[...]

20 English Installation E62405SP R Connecting the Projector  Due to the differ- ence in applications for each country, some regions may have differ- ent accessories. N o t e   To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with your projector. (See pages 46~48) [...]

English 21 English Installation E62405SP R  Due to the differ- ence in applications for each country, some regions may have dif- ferent accessories. N o t e   To ensure the projector works well with your computer, please make sure the timing of the display mode is compatible with your projector. 1.....................................[...]

22 English Installation Powering On the Projector 1. Ensure that the power cord and signal cable are securely connected. The Power indicator will turn red. 2. Remove the lens cap.  3. Turn on the lamp by pressing “Power” on the control panel or the remote control.  The Power indicator will ash blue. The startup screen will display in a[...]

English 23 English Installation Powering Off the Projector 1. Press the “Power” to turn off the projector lamp, you will see a message as below on the on-screen display. 2. Press the “Powe r” again to conrm. 3. The cooling fan continues to operate for about 60 seconds for cooling cycle and the Power indicator will ash red. When the li[...]

24 English Installation Warning Indicator  When the “Temp” i ndicator lights red , it indicates the pro - jector has overheated. The projector will auto matically shut itself down.  When the “Lamp” i ndicator lights red , and you see the mes- sage below displays on-screen, the projector has detected that the lamp is approaching its en[...]

English 25 English Installation Adjusting the Projected Image Adjusting the Height of Projector Image The projector is equipped with adjustable feet to raise and lower the image to ll the screen. To raise/lower the image: 1. Use  to ne-tune the display angle .  You can raise the projector front up to 8 degrees by rotating the adjustable[...]

26 English Installation Focus Ring Adjusting the Projector Zoom and Focus You may turn the zoom lever to zoom in or out. To focus the image, rotate the focus ring until the image is clear.  PJ S2130/PJ X2130 series: The projector will focus at distanc - es from 3.93 to 42.98 feet (1.2 to 13.1 meters).  PJ WX2130 series: The projector will foc[...]

English 27 English Installation  This graph is for user’s reference only. Diagonal length (inch) size of 4:3 Screen Screen Size W x H Projection Distance (D) Offset (Hd) (m) (inch) (m) (feet) Width Height Width Height wide tele wide tele (m) (feet) 30 0.61 0.46 24.0 18.0 1.2 1.3 3.9 4.3 0.05 0.2 40 0.81 0.61 32.0 24.0 1.6 1.8 5.2 5.7 0.07 0.3 [...]

28 English User Controls The Projector has a multilingual On Screen Display that allows you to make image adjustments and change a variety of set - tings. The projector will automatically detect the source. How to operate 1. To open the OSD, press “Menu” on the Remote Control or the key - pad. 2. When OSD is displayed, use keys to select any it[...]

English 29 English User Controls Image Adjustment Contrast The contrast controls the degree of difference between the lightest and darkest parts of the picture. Adjusting the contrast changes the amount of black and white in the image.  Press the to decrease the contrast.  Press the to increase the contrast. Brightness Adjust the brightness o[...]

30 English User Controls Picture Mode There are many factory presets optimized for various types of im- ages. Use the or to select the item.  Bright: The mode emphasizing brightness.  Standard: The mode balancing brightness and color.  Natural: The mode emphasizing color representation. R-level Use the or to adjust Red signal level. G-leve[...]

English 31 English User Controls Image Adjustment| Position Phase Eliminate icker from the image displayed. Use the or to adjust the value. Frequency Adjust the number of total dots in one horizontal period. Use the or to adjust number to match your PC image. H-position (Horizontal Position)  Press the to move the image left.  Press the to[...]

32 English User Controls Display Settings Aspect Use this function to choose your desired aspect ratio.  Normal: Enlarge an input image to t the screen without chang - ing the aspect ratio of video signals.  Full: Displays an input image in PJ S2130(800 × 600)/PJ X2130(1024 × 768)/PJ WX2130(1280 × 800) dot resolution by enlarging it to [...]

English 33 English User Controls Wall Color Correction Use this function to choose a wall color from “Off”, “Whiteboard”, “Beige”, “Blackboard(Green)” and “Gray”. Background on NoSignal Use this feature to display a “Logo”, “Blue” or “None”, screen when no signal is available. Display Icon Choose “On” to display [...]

34 English User Controls Default Settings 1 Power Off on No Signal Sets the countdown timer interval. The countdown timer will start, when there is no signal being sent to the projector. The projector will automatically power off when the countdown has nished. Auto Input Search When this function is turned “On”, the projector will search for[...]

English 35 English User Controls Projection Mode  Stnd. (Standard) The factory default setting. The image is projected straight on the screen.  Rear When you select this, the projector reverses the image so you can project behind a translucent screen.  Ceiling When you select this, the projector turns the image upside down for ceiling-moun[...]

36 English User Controls Default Settings 2 High Altitude Mode When “On” is selected, the fans will spin faster. Set High Altitude mode to “On” when the projector is used over 2500ft (750m) eleva - tion. Key Lock When the keypad lock function is “On”, the control panel will be locked other than “Power” key. However, the projector ca[...]

English 37 English User Controls 3D Projection Refer to next page. Reset All Return the adjustments and settings to the factory default values.[...]

38 English User Controls Default Settings 2 | 3D Projection 3D Projection  Off: Choose “Off” to display normal (2D) picture.  On: Choose “On” to display 3D format. DLP Link Select “On” to display 3D image viewing with DLP Link 3D glasses. Optional sold 3D glasses uses DLP link system to synchronize with the product. Set DLP Link ?[...]

English 39 English User Controls Display Status Input Input source name. Resolution Resolution (in dots). Picture Mode Display the setting of Picture mode. Lamp Time Time of lamp use. Total Time Total Time, including Eco mode and Standard mode. Lamp Reset Count Display the number of projector replacement lamps. Firmware Version Display Firmware ver[...]

40 English Appendices Problem: No image appears on screen  Ensure all the cables and power connections are correctly and securely connected as described in the “Installation” section.  Ensure the pins of terminals are not crooked or broken.  Check if the projection lamp has been securely installed. Please refer to the “Replacing the [...]

English 41 English Appendices Problem: The screen of the Notebook or PowerBook com- puter is not displaying a presentation  If you are using a Notebook PC: Some Notebook PCs may deactivate their own screens when a second display device is in use. Each has a different way to be reactivated. Refer to your computer’s documentation for detailed in[...]

42 English Appendices Problem: Image is reversed  Select “Default Settings 1 -->Projection Mode” from the OSD and adjust the projection direction. Problem: Lamp burns out or makes a popping sound  When the lamp reaches its end of life, it will burn out and may make a loud popping sound. If this happens, the projector will not turn on u[...]

English 43 English Appendices Message POWER indicator TEMP indicator LAMP indicator (Red/Blue) (Red) (Red) Standby (Input power cord) (Red) Normal (Power on) (Blue) Powering up (Warming up) Flashing Blue (0.5 sec) Power off (Cooling Down) Flashing Red (0.5 sec) Error (Over temp. On Event) (Blue) Error (Over temp. On Standby) (Red) Error (Lamp faile[...]

44 English Appendices Problem: Message Reminders  Over temperature - the projector has exceeded its recommended operating temperature and must be allowed to cool down before it may be used.  Replacing the lamp - the lamp is about to reach its maximum life- time. Prepare to replace it soon.  Fan failed - the system fan is not working.[...]

English 45 English Appendices Replacing the lamp The projector will detect the lamp life itself. It will show you a warning message When you see this message, change the lamp as soon as pos - sible. Make sure the projector has been cooled down for at least 60 minutes before changing the lamp. Warning: To avoid burns, allow the projector to cool for[...]

46 English Appendices Computer Compatibility A. VGA Analog (1) VGA Analog - PC Signal Modes Resolution V.Frequency (Hz) H.Frequency (kHz) Clock (MHz) VGA 640 x 480 60 31.47 25.18 640 x 480 72 37.86 31.50 640 x 480 75 37.50 31.50 640 x 480 85 43.27 36.00 SVGA 800 x 600 56 35.20 36.00 800 x 600 60 37.88 40.00 800 x 600 72 48.08 50.00 800 x 600 75 46.[...]

English 47 English Appendices A. VGA Analog (2) VGA Analog - Extended Wide Modes Resolution V.Frequency (Hz) H.Frequency (kHz) Clock (MHz) WXGA 1280 x 768 60 47.78 79.50 1280 x 768 75 60.29 102.25 1280 x 768 85 68.63 117.50 1280 x 720 60 44.80 74.25 1280 x 800 60 49.60 83.50 1440 x 900 60 55.90 106.50 1680 x 1050 60 65.30 146.25 1366 x 768 60 47.74[...]

48 English Appendices SXGA 1152 x 864 75 67.50 108.00 1152 x 864 85 77.10 121.50 1280 x 1024 60 63.98 108.00 1280 x 1024 72 77.90 134.60 1280 x 1024 75 79.98 135.00 1280 x 1024 85 91.15 157.50 QuadVGA 1280 x 960 75 75.00 126.00 PowerBook G4 640 x 480 60 31.50 25.17 PowerBook G4 640 x 480 66.6(67) 35.00 30.24 PowerBook G4 800 x 600 60 37.88 40.00 Po[...]

English 49 English Appendices Congurations of Terminals Terminal : Analog RGB (Mini D-sub 15 pin) 1 Red (R/Cr) Input/R Output 9 DDC 5V / NC 2 Green (G/Y) Input/G Output 10 Ground (Ver. sync.) 3 Blue (B/Cb) Input/B Output 11 ICP download 4 ICP download / NC 12 DDC Data / NC 5 Ground (Horiz.sync.) 13 Horiz. sync. Input / Output (Composite H/V sync[...]

50 English Appendices Specications ■ List of general specications Item Specication Consumption Power 225W (ECO mode) / 280W (Full mode) Weight 5.5 lbs (2.5 Kg) Dimensions (WxHxD) 286x100x208 mm (include protruding parts) Environmental Consider- ations Operational Temperatures : 41° to 95°F (5° to 35°C), 20% to 80% humidity (non-conde[...]

English 51 English Appendices Trademarks • DLP is trademarks of Texas Instruments. • IBM is a trademark or registered trademark of International Business Machines Corporation. • Macintosh, Mac OS X, iMac, and PowerBook are trademarks of Apple Inc., registered in the U.S. and other countries. • Microsoft, Windows, Windows Vista, Internet Exp[...]

© 2011[...]

USer’ s Manual Printed in China Y0206220 EN GB[...]