Riverstone Networks RS 2100 manual

3 6 - 0 03 - 03 R ev. 0B RS 2100 Switch Router Getting Started Guide Release 7.0[...]

ii Riverstone Networks RS 2100 Switch Router Getting Started Guide COPYRIGHT NOTICES © 2001 by Riverstone Network s, Inc. All rights reserved. Riverstone Netwo rks, Inc. 5200 Great Am erica Parkway Santa Clara, CA 95054 Printed in th e United States of Am erica This product includes soft ware developed by the University of Ca lifornia, Berkeley , [...]

Riverstone Ne tworks RS 2100 S witch Router Getting Started Guide iii REGULATORY COMPLIANCE INFORMATION This product complies with the following: SAFETY UL 1950; CS A C22.2, No. 950; 73/23/EEC; EN 60950 ; IEC 950 ELECTROMAGN ETIC FCC Part 1 5; CSA C108.8; 89/336/ EEC; EN 5502 2; EN 61000-3 -2 COMP ATIBILITY ( EMC) EN 6100 0-3-3; EN 500 82-1, A S/NZ[...]

iv R iverstone Networks RS 2100 Switc h Router Getting St arted Guide War n i n g Changes or modification s made to this device that are not expressly approved by the party responsible for compliance could void the user ’ s authority to operate the equipment. INDUSTRY CANADA COMPLIA NCE S T ATEMENT This digital a pparatus does n ot exceed the Cla[...]

Riverstone N etworks RS 2100 Switch Router Getting Started Gu ide v VCCI COM PLIANC E S TATEMENT This is a Class A pro duct based on the standard of the V oluntary Contr ol Council for Interfer ence by Information T ech nology Equipment (VCCI). If this equipment is used in a domestic environment, radio disturbance may arise. When such trouble occur[...]

vi R iverstone Networks RS 2100 Switc h Router Getting St arted Guide SAFETY INFORMA TION: WICT1-12 T1 CARD War n i n g T o reduce the risk of fir e, use only No. 26 A WG or larger telecommunication line cord. CONSUMER INFORMATION AND FCC RE QUIREMENTS 1. This equipment complies with Part 68 of the FCC rules, FCC Registration Number 6TGUSA-4 6505-D[...]

Riverstone Networks RS 2100 Switch Router Getting Started Guide vii Repairs to certified equipment should be coordinated by a repr esentative designated by the supplier . Any repairs or alterations made by the user to this equipm ent, or equipment mal functions, may give th e telecommunicatio ns company ca use to request the user to disconnect the [...]

viii Riverstone Networks RS 2100 Switch Router Getting Started Guide RIVERSTONE NETWORKS, INC. SOFTW ARE LICENSE AGREEMENT IMPOR T ANT : BEFORE UTILIZING THE PRODUCT , CAREFULL Y READ THIS LICENSE AGREEMENT . This docum ent is an agree ment (“Agreem ent”) between Y o u, the end us er, and Riv erstone Network s, Inc. (“Riversto ne”) that set[...]

Riverstone Networks RS 2100 Switch Router Getting Started Guide ix sufficien t numbers only for backup o r arch ival p urpose s, or t o rep lace a wor n or defect ive c opy . Howev er , Y ou agre e not t o hav e more than t wo (2) copies of the Licen sed Softwar e in whol e or in part, in cludi ng the ori ginal media, in yo ur posses sio n for sai [...]

x Riverstone Networks RS 2100 Switch Router Getting Started Guide considered commer cial computer software in accordance with DF ARS s ection 227.7202- 3 and its successors, and use, dup lication, or disclosure by the Gove rnment is subject to restrictions set forth here in. 9. LIMITE D W ARRANTY AND L IMIT A TI ON OF LIABILI TY . Riverston e warra[...]

Riverstone Networks RS 2100 Switch Router Getting Started Guide xi statements and undert akings, oral o r written, are hereby ex pressly sup erseded and canceled. No purchase o rder shall sup ersede this Agreement. (e) S hould Y ou h ave a ny qu est ions r egard ing this A greem ent, Y ou may c ontac t Ri versto ne at the addr ess se t fort h below[...]

xii Riverst one Networks RS 2 100 Switch Rout er Getting Started G uide RIVERSTONE ST ANDARD W ARRANTY A. Product W arranty i. RIVERSTONE warrant s that each unit of Hardware Products will be free from defects in material an d work- manship fo r a period of one ( 1) year from the date o f shipment . ii. Breach of warranty will be enforceable agains[...]

Riverstone Networks RS 2100 Switch Router G etting Started G uide xiii in effect. v . RIVERSTONE shall h ave full and free acces s to the Produ cts and Licensed Materials at PURCHASER's Cus- tomer's site, if required. vi. RIVERS T ONE shall not be resp onsible for failure t o furnis h Parts du e to causes bey ond its con trol. RIV ER- STO[...]

xiv Riverstone Networks RS 2100 Switch Router Getting Started Guide DECLARATION OF CONFORMITY ADDENDUM Applicatio n of Council Dir ective(s) 89/336/ EEC 73/23/ EEC Manufacturer ’ s Name Riverstone Netwo rks, Inc. Manufacturer ’ s A ddress 5200 Gr eat America P arkway Santa Clara, CA 95054 Conformance to Directive( s)/Product Standards EC Di rec[...]

Riverstone Networks RS 2100 Switch Router G etting Started G uide xv T ABLE OF CONTENTS 1 About Th is Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 1.1 How to Use This Guide . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

xvi Riverstone Networks RS 2100 Switch Router Getting Started Guide 4.3 Configuratio n Changes and Savin g the Configuration File. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4- 6 4.3.1 Activating the Conf iguration Comman ds in the Scratchpad . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 -6 4.3.2 Saving the Acti[...]

Riverstone N etworks RS 2100 Switch Router Getting Started G uide xvii LIST OF FI GURES Figure 2-1 Front view of an R S 2100 chass is . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-8 Figure 2-2 Front panel of gigabit ports . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . [...]

xviii Riverstone Networks RS 2100 Switch Router Getting Started Guide[...]

Riverstone Network s RS 2100 S witch Router Getting Started Guide xix LIST OF T ABLES Table 2-1 ISO 7-layer model and RS 2100 capabilities . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 Table 2-2 Basic hardware and software s pecifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

xx Riverstone Networks RS 2100 Switch Router Getting Started Guide[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 1-1 1 ABOUT THIS GUIDE This guide provides a general overview of the hardware and software features, and provides procedures for initial install ation and s et up of t he RS 21 00. 1.1 HOW TO USE T HIS GUIDE 1.2 RELATED DOCUMENTATION The Riverstone documentation set includes the follo[...]

1-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide Related Documentation About This Guide[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 2-1 2 RS 2100 INTRODUCTION The Riverst one RS 2100 provid es non-b locking , wire-speed Lay er -2 (swit ching), Layer - 3 (routing) , and Layer -4 (applicat ion) swit ching. Thi s chapter provi des a basic overvi ew of the RS 2100 softw are and hardware feat ure set. Note For the late[...]

2-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide Specifications RS 2100 Introduction 2.2 S PECIFICATIONS The RS 2 100 provi des high-s peed swit ching and full non -blocking t hroughp ut. The har dware prov ides hi gh-speed performance regardless of the p erformance monitoring, filtering, and Quality of Service (QoS) featur es en[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 2-3 RS 2100 Introduction Software Ov erview 2.3 SOFTWARE OVERVIEW This section describes the features and capabilities of the RS 2100 in greater detail. For full information regarding the use of these features and capabilities, see the Riverstone RS S witch Router User Guide . 2.3. 1 [...]

2-4 Riverstone Networks RS 2100 Switch Router Getting Started Guide Software Ov erview RS 2100 Introduction Note All othe r prot ocols that r equire routing mu st be t unneled u sing IP . By default, the RS 2100 us es one MAC address fo r all interfaces. The R S 2100 can be co nfigured to have a separate MAC address for each IP interface and a sepa[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 2-5 RS 2100 Introduction Software Ov erview 2.3.4 Layer-4 Switching In addition to layer-2 bridging and laye r-3 routing, the RS 2100 performs layer-4 switching. Layer-4 switching is b ased on appli cations and flows. Layer - 4 App lications – The RS 21 00 unders tands the applicati[...]

2-6 Riverstone Networks RS 2100 Switch Router Getting Started Guide Software Ov erview RS 2100 Introduction • Layer -4 appli cation fl ows QoS mechanisms su pported on the RS 2100 include the following: • T raf fic control queuing • W eighted random early detection • W eighted fa ir queuing • Strict priority queuing • QoS traf fic cont [...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 2-7 RS 2100 Introduction Software Ov erview SSL persistence – a binding is determined by matching the source IP address an d the virtual destination IP/port address. Note that r equests from any source s ocket with the client IP addr ess are considered part of the same sessio n. S t[...]

2-8 Riverstone Networks RS 2100 Switch Router Getting Started Guide Hardware Overview RS 2100 Introduction 2.4 HARDWARE OVERVIEW This secti on descri bes the RS 2100’ s hardware specif ications. For in formation o n instal ling the har dware, see Chap ter 3, "Har dwar e Inst allation ." 2.4.1 C hassis The RS 2 100 chassis contains eight[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 2-9 RS 2100 Introduction Hardware Overview 2.4. 3 Mother board Featur es The internal “mother board” perfor ms all the RS 2 100’ s computing and ro uting functio ns. It contains system- wide bridgin g and routi ng tables. T raf fic that does not y et have an en try in t he L2 an[...]

2-10 Riverstone Networks RS 2100 Switch Router Getting Started Guide Hardware Overview RS 2100 Introduction 2.4.4 F ans The RS 2100 contains three internal fans to provide co oling air flow acr oss the motherbo ard and gigabit po rts. The fans are located near the middle of the chassis, b etween the power supplies and the motherboard. War n i n g T[...]

Riverstone Network s RS 2100 S witch Router Getting Started Guide 2-11 RS 2100 Introduction Hardware Overview LEDs The gigabi t ports u se the followin g LEDs. T able 2- 6 Gigabit port LEDs LED De scription Per -port Link Gr een – Indicates that the port hardware detects a cable plugged into the port and a good link is es tabl ish ed. Red (i nte [...]

2-12 Riverstone Networks RS 2100 Switch Router Getting Started Guide Hardware Overview RS 2100 Introduction[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 3-1 3 HARDWARE INST ALLATION This chapter pr ovides hard ware installa tion instru ctions and inform ation on safe ty consideration s, environm ental considerat ions, and r egulator y standar ds. 3.1 SAFETY CONSIDERATIONS Read the fol lowing sa fety warn ings and product cautions to a[...]

3-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide Hardware Specifications Hardware Installa tion 3.2 HARDWARE S PECIFICATIONS The following table lists the phy sical and environ mental specifications for the RS 2100 . 3.2.1 Installing the Hardware This secti on descri bes how to perform t he followi ng tasks: • V erifyi ng your [...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 3-3 Hardware Installation Hardware Specifications 3.2.3 Insta lling t he Chassis Install the RS 2100 in a standar d 19” equipment r ack. War n i n g Before p erforming any mechan ical upgrad e or ins tallation procedures , ensure that the RS 2100 is powered of f. War n i n g Never a[...]

3-4 Riverstone Networks RS 2100 Switch Router Getting Started Guide Hardware Specifications Hardware Installa tion Figure 3- 1 I nstalling t he R S 2100 ch assis i n an e quipme nt rack War n i n g Make sure the screws are tight before y our assistant releases the chas sis. If you accidentally leave the screws loos e, the chassis can slip and fa ll[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 3-5 Hardware Installation Hardware Specifications Connecting a 10/100BASE-TX Management Cable Use the RJ- 45 10/10 0BASE-TX DT E port for connecting the RS 2100 to your networ k for in- band management through either T elnet or SNMP . Figure 3 -3 sho ws th e pin posi tions of the 10/1[...]

3-6 Riverstone Networks RS 2100 Switch Router Getting Started Guide Hardware Specifications Hardware Installa tion RXD (receive data) 6 TXD (transmit data) Unused 7 Unused Unused 8 Unused a. The rig ht ha nd co lumn pin assig nment s ar e f or the RJ- 45 co nne ctor on th e RS 210 0. Pi n 1 ( TXD or “transmit data”) must emerge on the mana geme[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 4-1 4 RS 2100 INITIAL CONFIGURATION This chapter provides the following information on powering up the RS 2100 for the first time, and performing basic setup procedur es. Basic setup include: • Powerin g on the RS 2100 and b ooting t he software • Star ting the Command Line Interf[...]

4-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide Powering on the RS 2100 RS 2100 Initi al Configuration Here is a partial exampl e: 4. When the software is fu lly booted, th e following messages appear s on the management co nsole: Boot Software Version prom-2.0.0.5, Bu ilt Jan 5 2001 20:18:57 Processor: R5000 rev 2.1 [0x2321], 1[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 4-3 RS 2100 Initial Conf iguration Powering on the R S 2100 5. As prompted, press Retur n (or Enter) to activate the C ommand Line Interface (CLI) on the console. Note If prompt ed for a pas sword, simply p ress the Return key . The d efault pas swords are blank. Note If the mess age [...]

4-4 Riverstone Networks RS 2100 Switch Router Getting Started Guide Starting the Command Line Interface RS 2100 Initi al Configuration 4.2 S T ARTING THE COMMAND LINE INTERFACE T o start the Command Line Interfac e (CLI), power o n the system, as descri bed in Section 4.1, "Power ing on th e RS 2100" After the software is fully b ooted, p[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 4-5 RS 2100 Initial Configuration Starting the Command Line Interface 4.2.2 Basic Li ne Editing Co mmands The CLI supports Emacs-like line editing com mands. The following table lists some commonly used commands. For a complete set of commands, see the Rivers tone RS Switch Router Com[...]

4-6 Riverstone Networks RS 2100 Switch Router Getting Started Guide Configuration Changes and Saving the Confi guration File RS 2100 Initi al Configuration 4.3 CONFIGURATION CHANGES AND SAVING THE CONFIGURATION FILE The RS 2 100 uses three s pecial configu ration files: Caution The active configuration rem ains in ef fect only during the current po[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 4-7 RS 2100 Initial Configuration Configuration Changes and Saving the Configuration File Note If you ex it the Co nfigure mode ( by enteri ng the exit command or pr essing Ctrl+z), the CLI will as k you whet her you want to make active the changes in the scratchpad. I f you do not ma[...]

4-8 Riverstone Networks RS 2100 Switch Router Getting Started Guide Configuration Changes and Saving the Confi guration File RS 2100 Initi al Configuration 4.3. 3 V ie wing the Curre nt Confi gur atio n T o view the cu rrent config uration: 1. Ensure that you are in Enable mode b y entering the enable command. 2. Enter the following command to disp[...]

Riverstone Ne tworks RS 2100 Switch Router Getting Started Guide 4-9 RS 2100 Initial Configuration Setting the Basic S ystem Information 4.4 SETTING THE BASIC SYSTEM INFORMATION Follow the procedures in this sectio n to set the following system information: • System time and date • System na me • System location • Contact n ame (the pers on[...]

4-10 Riverstone Networks RS 2100 Switch Router Getting Started Guide Setting the Basic System Information RS 2100 Initi al Configuration Here is an examp le: 5. Use the interface add ip co mmand to set the IP address and netmas k for the en0 Ethernet interface. The en0 Ethernet interface is u sed by the RS 2 100’ s management port. Here is an exa[...]

Riverstone Network s RS 2100 S witch Router Getting Started Guide 4-11 RS 2100 Initial Configuration Setting the Basic S ystem Information 9. Save the Active configuration to the Startup configuration file using the following command: 10. When the CLI displays the following message, enter y to sa ve the changes to the S t artup configuration file: [...]

4-12 Riverstone Networks RS 2100 Switch Router Getting Started Guide Setting Up Passwords RS 2100 Initi al Configuration 4.5 SETTING UP PASSWORDS Y ou can p assword-protect CLI access to the RS 2100 by s etting up pass words for User mode access and Enable mod e access. Users who ha ve a User password but not an Enab le password can us e only the c[...]

Riverstone Network s RS 2100 S witch Router Getting Started Guide 4-13 RS 2100 Initial Conf iguration Setting Up Passwords 4.5.1 If Y ou Forget Y our Pa sswords If you fo rget yo ur passwor ds follow this proced ure to regain access to your RS 2100 . Note T o perform this proced ure, you mu st use a terminal or P C running t erminal emulation softw[...]

4-14 Riverstone Networks RS 2100 Switch Router Getting Started Guide Setting Up Passwords RS 2100 Initi al Configuration 5. When the RS 2100 fini shes boot ing, ent er the foll owing com mands (when p rompted, an swer yes ): 6. Both the User access mode and En able access mode passwords are now reset to the default “blank” val ues . 7. Enter ne[...]

Riverstone Network s RS 2100 S witch Router Getting Started Guide 4-15 RS 2100 Initial Conf iguration Setting Up SNM P 4.6 SETTING UP SNMP T o use SNMP to manage the R S 2100, you need to set up an SNMP community and specifying the I P address of the tar get hos t for SNMP t raps. Oth erwise, th e RS 2100’ s SNMP agent r uns in l ocal trap p roce[...]

4-16 Riverstone Networks RS 2100 Switch Router Getting Started Guide Setting Up SNMP RS 2100 Initi al Configuration By default, SNMP infor mation is sent an d received on the R S 2100’ s en0 Ethern et port. If you want SNMP to us e a dif ferent po rt on the R S 2100, use the fol lowing command Here is an examp le: SNMP will now use the port with [...]

Riverstone Network s RS 2100 S witch Router Getting Started Guide 4-17 RS 2100 Initial Conf iguration Setting Up SNM P For additional information about RS 2100 security and ACLs, see th e Riverstone RS Switch Ro uter U ser Guide. 4.6. 3 Supp orted MI Bs The following lists the MIBs that are supported b y the RS 2100 SNMP agent. T able 4- 4 RS 2100 [...]

4-18 Riverstone Networks RS 2100 Switch Router Getting Started Guide Setting the DNS Domain Name and Address RS 2100 Initi al Configuration 4.7 SETTING THE DNS DOMAIN NAME AND ADDRESS Associating a DNS name ser ver with your RS 2100 allows you to use d evice names (rather than I P addresses) when entering certain com mands. For example, you can us [...]

Riverstone Network s RS 2100 S witch Router Getting Started Guide 4-19 RS 2100 Initial Configuration Setting the DNS Domain Name and Addre ss 7. Exit Configure mode, then enter the system show dns command to verify the new DNS settings: Here is an examp le: 8. Use the ping command to verify that the RS can resolve the DNS server name into its IP ad[...]

4-20 Riverstone Networks RS 2100 Switch Router Getting Started Guide Setting the SYSLOG Parameters RS 2100 Initi al Configuration 4.8 SETTING THE SYSLOG PARAMETERS The RS 2 100 can use SYS LOG messages to communicat e the followi ng types o f messages to a SYSLOG s erver: Ta b l e 4 - 6 s hows examples of the types of SYSLOG mess ages. Notice that [...]

Riverstone Network s RS 2100 S witch Router Getting Started Guide 4-21 RS 2100 Initial Configuration Setting the SYSLOG Param eters Note The <facility-type> is a string of the fo rm: user , kern , or local0 thr oug h local7 . These strings are reserved by the SYSLOG server daemon . for information on how <facility-type> is used by the S[...]

4-22 Riverstone Networks RS 2100 Switch Router Getting Started Guide Setting the SYSLOG Parameters RS 2100 Initi al Configuration[...]

Riverstone Networks RS 2100 Getting Started Guide 5-1 5 MANAGING RS 2100 SOF TWARE This chap ter de scri bes ho w to per fo rm ope rat ions regar din g RS 2 100 oper atin g soft ware and bo otPR OM i mage s software. The following topics are covered : • Upgrading the system image software • Upgrading the Boot PROM image software • Loading RS [...]

5-2 Riverstone Networks RS 2100 Getting Started Guide Upgrading System I mage Software Managing RS 2100 Software Note The <image-file-name> is the full directory path and filename to the image software file on the TFTP server . Here is an examp le: 4. Enter the system image list command to list the images on the internal flash memory and veri[...]

Riverstone Networks RS 2100 Getting Started Guide 5-3 Managing RS 2100 Soft ware Upgrading Boot PROM Software Note Y ou do not need to activate this change. 7. Reboot the RS 210 0 to load and ru n the new system software imag e. 5.2 UPGRADING BOOT PROM SOFTWARE The RS 2100 boots using the boot PROM image software installed on the motherbo ard’ s [...]

5-4 Riverstone Networks RS 2100 Getting Started Guide Upgrading Boot PROM Software Managing RS 2100 Software Here is an examp le: 4. Reboot the RS 2100. 5. Enter the system show version command to verify that the new boot PROM software is in the internal memory of t he RS 21 00’ s motherboard. rs# system promimage upgrade 134.152.178.5 tft pboot/[...]

Riverstone Networks RS 2100 Getting Started Guide 5-5 Managing RS 2100 Software Loading Software from th e Network 5.3 LOADING SOF TWARE FROM THE NETWORK T ypically , the RS 2100 loads its oper ating software from the flash memor y contained on the motherbo ard. Alternately , the RS 21 00 can be configured t o ignor e its inter nal flash imag e and[...]

5-6 Riverstone Networks RS 2100 Getting Started Guide Loading Software from the Network Managing RS 2100 Software Here is an examp le: 6. Enter the set command to view the ch anges: Here is an examp le: 7. From th e Boo t prom pt, us e the ping command to verify that the RS 2100 can reach the TFTP server . 8. Reboot the RS 2100. As the RS 21 00 ini[...]

Riverstone Networks RS 2100 Getting Started Guide 5-7 Managing RS 2100 Software Loading Software from th e Network 5.3.2 Loading Image S of tware from a B ootP/TFTP Serve r The RS 2100 contains a BootP client and can be conf igured to obtain its image s oftware from a B ootP/TFTP server . Using the BootP client allows the RS 2100 to ob tain it s so[...]

5-8 Riverstone Networks RS 2100 Getting Started Guide Loading Software from the Network Managing RS 2100 Software 6. Reboot the RS 2100 by entering th e reboot co mmand at the Boot prompt . Here is an examp le rs-boot> reboot Ethernet Base address = 00:00:1d:12:34 :56 Ethernet CPU address = 00:00:1d:12:34 :57 Performing Bootp with timeout in 5 s[...]

Riverstone Networks RS 2100 Switch Router Getting Started Guide A-1 APPENDIX A T ROUBLESHOOTING If you ex perience dif fi culty with th e basic hard ware or softw are setup procedures i n this gui de, check t he following t able to s ee whether the d ifficu lty you are experienci ng is descri bed. If yo u find a descripti on of the difficu lty you [...]

A-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide Configuration chang es are not reins tated after a reboot. T o save the configur ation changes to the Startup configuration f ile, use the pr ocedure in Section 4.3.2, "Saving the Active Configuratio n to the St artup Configuration File." The RS 21 00 is not resolving D N[...]

Riverstone Networks RS 2100 Switch Router Getting Started Guide Index-1 INDEX Numerics 1000-Mbp s port .................................. .... 2-10 10Base-T/ 100Base-TX mana gement p ort 2- 8 A access mod es .................... .................. ...... 4-4 activa ting conf ig commands in scrat chpad 4- 6 activa ting the Co mmand Li ne Interf ace [...]

Index-2 Riverstone Networks RS 2100 Switch Router Getting Started Guide copy act ive to startup ... ....................4-7 , 4-11 copy sta rtup to s cratc hpad ...................... 4-14 Ctrl+z ........................... .................. ........... 4-4 D damage, preventi ng ..... .................. ........... 3-1 date and tim e .............[...]

Riverstone Networks RS 2100 Switch Router Getting Started Guide Index-3 IGMP ........................................... ...... 2-4 Multi- Proto col L abel S witc hing ............... 2-6 N NVRAM ............................................. ...... 2-9 O OSPF v2 ...................... .................. ............... 2-4 overvie w ...............[...]

Index-4 Riverstone Networks RS 2100 Switch Router Getting Started Guide set command ......................... ... 4-13 , 5- 5 , 5-7 setti ng basic s ystem in format ion .............. 4-9 setti ng boot sour ce .................................. .. 5-5 setti ng date and time ............................... .. 4-9 setti ng passwo rds ................[...]

Riverstone Networks RS 2100 Switch Router Getting Started Guide Index-5 upgrad ing soft ware image- file-n ame ........................... ...... 5-2 ip add r oute ................ ........................ 5-1 system i mage add ....... ........................ 5-2 system i mage choos e ......................... 5-2 system i mage list ..............[...]