Runco VX-2000d manual

O WNER ’ S O PERATING M ANUAL VX-2000d 1080p Digital Light Processing TM Projector and Digital High Definition (DHD™) Controller[...]

[...]

Runco VX-2000d Owner’s Operating Manual iii PRE L IMINAR Y TWO YEAR LIMITED WARRANTY For Projectors, Video Processors and Controllers Congratulation s on your purchase of a Runc o video product and welcome to the Run co family! We believe Runco produ ces “The World’s Fine st Home Thea ter Products .” With prope r installation, setu p and ca[...]

iv Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y This warranty begins on the effective da te of delivery to the end use r. For your convenience, k eep the origin al bill of sale a s evidence of th e purchas e date. Please fill out and mail your warranty registration card. It is im perative that Runco knows how to reach you promptly if we[...]

Runco VX-2000d Owner’s Operating Manual v PRE L IMINAR Y To locate th e name and address of th e nearest Runc o Authorized Se rvice Center, o r for additiona l information ab out this Limited Warran ty, please call or w rite: RUNCO INTERNA TIONAL, INC. Attn: Customer Service Dep artment 2900 Faber St reet Union City , CA 94587 Ph: (510) 324-7777 [...]

vi Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Thank you for your purcha se of this quality Runc o video projector! It has been designed to prov ide you with the quality of vide o that is exp ected in a home theat er. For the best perfo rmance, plea se read th is manual ca refully as it is you r guide th rough the menus and operat ion.[...]

Runco VX-2000d Owner’s Operating Manual vii 1 Table of Content s PRE L IMINAR Y TWO YEAR LIMITED WARRANTY ................ ................ ................ ............. ................ .... iii S afety Precauti on s .............. ............. ................ ............. ................ ............. ............. ....... vi 1. Introducti[...]

Table of Contents viii Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Mounting the VX-200 0d ......... ............. ................ ............. ................ ............. ............. 24 Floor Mount ing (Upright) ............. ............. ................ ............. ................ ............. ... 24 Ceiling Moun ting (In[...]

Table of Contents Runco VX-2000d Owner’s Operating Manual ix PRE L IMINAR Y On-Screen M enus for 1080 i (Digital) or 10 80p Signals ...... ................ ................ .......... 52 Main Menu ........ ................ ............. ................ ............. ................ ............. ............. 54 Language ...... ............. ..[...]

Table of Contents x Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco VX-2000d Owner’s Operating Manual xi 1 Li s t of Figure s PRE L IMINAR Y 2-1. VX-2000d Front/Top/ Side/Bottom/R ear View ... ................ ............. ................ ............... 5 2-2. VX-2000d Rear Pane l ... ............. ................. ............ ................. ............ ................. ........ 7 2-3. DHD Contro [...]

List of Figures xii Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco VX-2000d Owner’s Operating Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual descri bes how to in stall, set up and o perate the R unco VX-2000d DLP Projector and DHD Controller. Throughout th is manual, the Runco VX-2000 d DLP Projector an d DHD Controller a re referred to co llectively as the “VX- 2000d.” Target Aud[...]

Introduc tion 2 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y G raphic Convention s : These symbols appear in numerous p laces throug hout the manual, to emp hasize points th at you must k eep in mind to avoid problem s with your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic information you[...]

Introd uction Runco VX-2000d Owner’s Operating Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The Runco VX-200 0d DLP Projector and DHD Con troller retains all of the features and performanc e of the VX-1000 d – our most popular projecto r ever – while in corporatin g new, cutting e dge technolo gy and 108 0p performance . Its[...]

Introduc tion 4 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Key Features and Benefits The VX-2000d offers thes e key features and bene fits: • Runco-engineered , Enhanced GEN 3 Technology™ w ith RVR • Native Resolution: 19 20 x 1080 (16:9 Native Aspect Ratio) • Two HDMI Inputs (on DHD Cont roller) with High-ba ndwidth Digital C[...]

Runco VX-2000d Owner’s Operating Manual 5 PRE L IMINAR Y 2.1 V X -2000d at a Glance Figure 2-1 shows the key VX-200 0d components. Figure 2-1. VX-2000d Fr ont/Top/ S ide/Bottom/Rear View 2. Control s and Function s 6 10 4 4 5 6 97 8 11 2 3 1 9 12[...]

Controls and Functions 6 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 1. VERTICAL LEN S S HI F T Using a 9/64” hex wrench, turn this to move the lens up or d own. 2. POWER LED Lights red to indicate th at the projec tor is in stand by; flashe s blue during warm-up or cool-down or lights blue to in dicate norma l operation. 3. TEMP LED[...]

Controls and Functi ons Runco VX-2000d Owner’s Operating Manual 7 PRE L IMINAR Y 2.2 V X -2000d Rear Panel Figure 2-2 sh ows the VX-2000d r ear panel. Figure 2-2. VX-200 0d Rear Panel 1. POWER INPUT (100 to 240 V AC) Connect the VX-2000 d to power here. 2. HDMI INPUT An HDCP-compliant, digital video input for conn ecting the HDM I output from the[...]

Controls and Functions 8 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 2.3 DHD Controller Front Panel Figure 2-3 shows the controls and ind icato rs on the DHD Controller front panel; the paragraph s that follow descr ibe them. Figure 2-3. DHD Controller Fro nt Panel 1. RUNCO ICON Lights red to indicate that the DHD Cont roller is in s t[...]

Controls and Functi ons Runco VX-2000d Owner’s Operating Manual 9 PRE L IMINAR Y 7. ENTER BUTTON Press ENTER to select a highlighte d menu item. 8. DOWN BUTTON Used to direct se lect aspect ratio s or move the menu cursor down in the OSD. When no menu is pres ent on-scr een, this button toggles throug h the differe nt aspect ratio s, in this orde[...]

Controls and Functions 10 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 2.4 DHD Controller Rear Panel Figure 2-4 show s the rear connec tor panel on the DHD Con troller. Figure 2-4. DHD Controller Rear Panel Outputs 1. HDMI OUT Connect this t o the HDMI Input on the VX-2000d (see Figure 2-2 ). Inputs 2. HDMI 1 / HDMI 2 (Digital) Two, HDC[...]

Controls and Functi ons Runco VX-2000d Owner’s Operating Manual 11 PRE L IMINAR Y 5. COMPO S ITE VIDEO INPUT Standard co mposite vid eo input for connecting a VCR, laser disc p layer or oth er composite video source. 6. S -VIDEO 1 / S -VIDEO 2 Two, standard S-Video inputs for connecting a DVD play er, satellite receiver or Super VHS (S-VHS) VCR. [...]

Controls and Functions 12 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 2.5 V X -2000d Remote Control Unit Figure 2-5 shows the VX-200 0d remote control, and the p aragraphs that follow describe its functionality. Figure 2-5. DHD Controller/VX- 2000d Remote Control 12 1 2 3 6 8 9 11 10 13 5 7 4[...]

Controls and Functi ons Runco VX-2000d Owner’s Operating Manual 13 PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR signal is bein g transmitt ed. 2. ON / OFF Press to turn t he projector o n or off. 3. ENTER Press to select a highlighte d menu item or conf irm a changed sett ing. 4. Cur s or Button [...]

Controls and Functions 14 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 9. A s pect Ratio S election B utton s Use the red but tons to select an aspect ra tio directly or t o enter num eric characters, as follows: ANA (Anamorphic) (3) For viewing 16:9 DVDs or HDT V programs in their n ative aspect ra tio. 4X3 ( S tandar d 4:3) (6) Scales[...]

Controls and Functi ons Runco VX-2000d Owner’s Operating Manual 15 PRE L IMINAR Y 2.6 V X -2000d Built-In Keypad The VX-2000d has a built-in keyp ad that you can use to ac cess the menu system for working with digital 1080i or 10 80p sources. Figur e 2-6 shows the VX-2000d built-in keypad; the pa ragraphs tha t follow describe it s use. Figure 2-[...]

Controls and Functions 16 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco VX-2000d Owner’s Operating Manual 17 PRE L IMINAR Y 3.1 Remote Control Battery Installation To install batteries in the remote co ntrol: 1. Remove the battery cove r from the b ack of the remote control. 2. Insert the b atteries inclu ded with the remo te control. Ensure that the polarities corre ctly match the and markings inside t he batt[...]

Installation 18 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y • Do not drop the remote control or expose it to moisture or hig h temperatu re. • The remote contr ol may malfunctio n under a fluoresc ent lamp. If that occur s, move the DHD Controller away from the fluorescent lamp. • Make sure th at there is nothing obstr ucting the[...]

Installation Runco VX-2000d Owner’s Operating Manual 19 PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick over view of the VX-2000d installation pr ocess. The sections following this one pr ovid e detailed ins tructions . Installation shou ld be performed by a quali fied custom video installation specialist. Table 3-1. In s tallation Overvie[...]

Installation 20 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 3.3 Installation Considerations Proper insta llation of you r projector wi ll ensure the q uality of your di splay. Whether yo u are installing a pr ojector temp orarily or perm anently, you sh ould take th e following into account to ensure your pro jector perfo rms optimally[...]

Installation Runco VX-2000d Owner’s Operating Manual 21 PRE L IMINAR Y Throw Distance Throw distanc e is the dista nce measure d from the f ront of the p rojector to the screen. This is an impo rtant calculatio n in any p rojector installation as it de termines wheth er or not you have enoug h room to inst all your projector with a desir ed scree[...]

Installation 22 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Vertical and Horizontal Position Proper placem ent of the project or relative to t he screen will yield a rectangular, perfectly-cen tered image that complet ely fills the screen. Ideally, the pro jector should be position ed perpendicula r to the scre en and in s uch a way th[...]

Installation Runco VX-2000d Owner’s Operating Manual 23 PRE L IMINAR Y The VX-2000d pr ovide s up to 50% of v ertical len s s hift in either dir ection. For example, with a 96 x 54-inch (16 :9) screen, yo u can shift the image up to 27.00 inches (0.69 meters) a bove or be low the scre en center . Folded Optics In rear screen ap plications where s[...]

Installation 24 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 3.4 Mounting the V X -2000d There are se veral method s for mountin g the projec tor. Depending o n your chose n installation, one method may b e more suit able than ano ther. Floor Mounting (Upright) In typical front an d rear screen in stallations, the p rojector can b e mou[...]

Installation Runco VX-2000d Owner’s Operating Manual 25 PRE L IMINAR Y 3.5 Connections to the V X -2000d and DHD Controller Proceed as foll ows to connect th e DHD Controller to the VX- 2000d, your video sou rces, external contro ller(s) – if prese nt – and AC p ower. When connect ing your equipm ent: • Turn off all equipment be fore making[...]

Installation 26 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Connecting Source Components to the DHD Controller Connect your vid eo sources to t he DHD Controlle r as shown an d described in the sections th at follow. HDMI Connection s : See Figure 3- 7. Figure 3-7. HDMI S ource Connectio n s ➤ Use the HDMI inpu ts whenever p ossible.[...]

Installation Runco VX-2000d Owner’s Operating Manual 27 PRE L IMINAR Y Digital (DTV) R G B or Compon ent Video Connection s : See Figure 3-8. Figure 3-8 . Digita l (DTV) R G B or Component Video Connection s HD1 HD2 G/Y INPUTS HV R/Pr B/Pb G/Y H V R/Pr B/Pb Component Video Pb Pr Y Vide o S-Video 2 S-Video 1 12 3 TRIGGERS HDMI 1 HDMI 2 DTV or Prog[...]

Installation 28 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Analog (Computer) R G B Connec tion s : See Figure 3-9. Figure 3-9. Analog R G B Co nnection s HD1 HD2 G/Y INPUTS HV R/Pr B/Pb G/Y H V R/Pr B/Pb Component Video Pb Pr Y Video S-Video 2 S-Video 1 12 3 TRIGGERS HDMI 1 HDMI 2 Personal Computer Red Green Blue Horiz V ert[...]

Installation Runco VX-2000d Owner’s Operating Manual 29 PRE L IMINAR Y Compo s ite/ S -Video/Component Video Connection s : See Figure 3- 10. Figure 3-10. Compo s ite, S -Video and Component Video Connection s HD1 HD2 G/Y INPUTS HV R/Pr B/Pb G/Y H V R/Pr B/Pb Component Video Pb Pr Y Video S-Video 2 S-Video 1 12 3 TRIGGERS HDMI 1 HDMI 2 DVD Player[...]

Installation 30 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Connecting a PC or Automation System to the DHD Controller Use a standard, 9 -pin RS-232 cable t o connect a PC or h ome theater co ntrol/auto mation system (if present) to the RS-232 Cont rol port on the DHD Controller; see Figure 3-11 . For more information about using this [...]

Installation Runco VX-2000d Owner’s Operating Manual 31 PRE L IMINAR Y Projector: The projector is equ ipped with an add itional 12-volt trigge r output. This trig ger activates wh en the projector is turned on. Co nnect it to your retractabl e screen or other , 12-volt trigger-activated equip ment as shown in Figure 3-13 . Figure 3-13. 12-volt T[...]

Installation 32 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Connecting to AC Power The VX-2000d system includes two (2) AC p ower cords (o ne each for t he projector and DHD Controller). Plug the female end of on e power co rd into the AC receptacle o n the rear o f the VX-2000d (AC 1 00V to 240V). Then, conne ct the other end to your [...]

Installation Runco VX-2000d Owner’s Operating Manual 33 PRE L IMINAR Y 3.8 Primary Lens Adjustments Focus and Zoom To focus the projected im age, gently rotate th e lens by hand. To enlarge th e picture (zoo m in), move the zoom ta b toward the Runco logo on the fr ont of the projector. To make the pict ure smalle r (zoom out ), move the t ab in [...]

Installation 34 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 3.9 Installing and Adjusting the CineWide Anamorphic Lens If you are installing a CineWide-equipp ed projector, proceed as follows to instal l and adjust the ana morphic lens. The standar d VX-2000d/Cin eWide uses a prismatic-style ana morphic len s. This type of lens compress[...]

Installation Runco VX-2000d Owner’s Operating Manual 35 PRE L IMINAR Y Adju s ting the Len s Height (Y): 1. Project a white field on t he screen. 2. Ensure th at the four Heigh t (Y) Adjustmen t Screws are loose enough to allow vertical movement o f the lens ass embly. 3. Slowly m ove the an amorphic le ns into place s o that the re are no sh ado[...]

Installation 36 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco VX-2000d Owner’s Operating Manual 37 PRE L IMINAR Y 4.1 Using the On-Screen Menus Press the MENU button on either the rem ote control or the DHD Contr oller front panel to display the Main Menu. To select a m enu item, use th e and buttons on either th e remote cont rol or the DHD Controller fro nt panel to highlig ht it. Press ENTER to con[...]

Operation 38 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Figure 4-1. DHD Co ntroller O S D Menu S tructure for VX- 2000d (1080i Analog and Lower -Re s olution S ource s ) S ervice Test Vide o Grey Bars 1 Grey Bars 2 Color Bars 1 Color Bars 2 Input Names Rename, Restor e or Save Remote Control Primary Secondar y Analog Out Mode RGB--, R[...]

Operation Runco VX-2000d Owner’s Operating Manual 39 PRE L IMINAR Y Main Menu The Main Me nu is the startin g point for a ccessing all project or functions. (The Calibration and Service m enus are hidd en and not accessible un til you enter a passcode.) Input Source From the M ain Menu, selec t Input Sou rce to choo se a video signa l source. The[...]

Operation 40 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio De s cription Anamorphic (16:9) Select Anamorphic to view 16:9 DVDs and HDTV programs in their native aspect ratio. 4:3 images are stretched horizontally to fit a 16:9 screen. Standard 4:3 Standard 4:3 scales the input signal to[...]

Operation Runco VX-2000d Owner’s Operating Manual 41 PRE L IMINAR Y Picture Use the contr ols in the Pictu re Menu to calib rate your VX -2000d for op timum picture quality. The VX-200 0d has been designed to in corporate s etup and calib ration stan dards establishe d by the Imaging Science Fo undation (ISF). Th e ISF has developed careful ly cr[...]

Operation 42 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Although it may be possible to obtain satisfact ory picture quality usin g the naked eye and regular progr am material, Runco recomme nds using the foll owing calibration tools for best results: • External test patter n source -- Ovation Multimedia, Digital Video Essentials or [...]

Operation Runco VX-2000d Owner’s Operating Manual 43 PRE L IMINAR Y Contra s t: On your exte rnal test patte rn source, se lect a stepped, gray-bar patte rn like the one shown in Figure 4-3 . Figure 4-3. Typical G ray Bar Pattern fo r Adju s ting Cont ra s t Select Contrast and press ENTER . Adjust the cont rast to a p oint just below wh ich the [...]

Operation 44 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Select Color and pres s ENTER . While looking at the color bar pattern thr ough a blue filter, adjust the color satu ration level until the ou termost (gr ay and blue) color bars appear to be a single shade of blue: Tint: Tint or “hue” is esse ntially the ratio of red to gree[...]

Operation Runco VX-2000d Owner’s Operating Manual 45 PRE L IMINAR Y S harpne ss : “Sharpness” is the a mount of hig h-frequency de tail in the ima ge. To adjust sharpness, select Sharpness from the Picture men u and press ENTER . On your ext ernal test pattern source, select a pattern like the one show n in Figure 4-5 . Adjust as nee ded, loo[...]

Operation 46 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Over s can: Image Oversc an pushes the outside edge of the acti ve picture ar ea of the video signal ou t beyond the ed ge of the display area. Some television progr ams are produced based on the assumption that older television sets may not display the oute r edges of t he broad[...]

Operation Runco VX-2000d Owner’s Operating Manual 47 PRE L IMINAR Y Calibration Use the Calibrat ion menu to p erform advanced picture qua lity adjustments. Thi s menu s hould be u s ed by I S F-certified technician s only . To recall the ISF N ight or ISF Da y settings, select “ISF Night” or “ISF D ay” from the ISF Presets menu ( see abo[...]

Operation 48 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y I S F Night - Input Image: The Input Imag e controls are simi lar to those in the Pictu re menu, but a re accessible only b y entering th e Calibration m enu passcode . This makes it possible to re store the pict ure qualit y settings to wh at they were when the pro jector was in[...]

Operation Runco VX-2000d Owner’s Operating Manual 49 PRE L IMINAR Y • Runco/I S F Logo S pla s h S creen Timer s : Whe n you turn o n the VX-2000d , it projects a we lcome scre en with the Runco logo follo wed by o ne with the ISF lo go. Select Splash Timer from the Splash Configure menu to set the amount of tim e that these two im ages app ear[...]

Operation 50 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Remote Control: The Remote Control menu shows yo u the primary a nd secondar y infrared (IR) codes to which th e VX-2000d will respon d. By default, both are set to 17. You can change these codes if either: • Another device in the theate r (a DVD pla yer, for example ) is respo[...]

Operation Runco VX-2000d Owner’s Operating Manual 51 PRE L IMINAR Y HD Format: If the characteristic s of the inco ming signal on the HD1 or HD2 inputs are known, select HD Fo rmat from the Servic e menu and set th em as described below. Doing so can reduce the time it take s the DHD Contr oller to switch from HD to 480i sign als or vice versa. T[...]

Operation 52 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Re s olution: When using the VX-2000d w ith a computer or certain HD sources, yo u may want to forc e the DHD Cont roller to use a specific outp ut resolution. If so , select Resolution fro m the Service menu an d choose one. Then , press ENTER to confirm. S y s tem Re s et: To r[...]

Operation Runco VX-2000d Owner’s Operating Manual 53 PRE L IMINAR Y Figure 4-6. O S D Menu S tructure for VX-2000d (1 080i Digital or 1080p S ource s ) Picture Adj u s t Picture Memory Standard , Black Enh ance, White Enhance, ISF Day, ISF Night or Cust om Contrast -90, -89, ... 0 ... +89, +90 Brightness Color -30, -29, -28 .. . 0 ... +28, +29, +[...]

Operation 54 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Main Menu Press MENU on either t he remote c ontrol or bu ilt-in keypad (on the pr ojector rear panel) to display the Main Menu, sh own in Figure 4-7 . The Main Menu is the starting point for calibrating the VX -2000d to optimize the disp lay of digital 1080i and 10 80p sources. [...]

Operation Runco VX-2000d Owner’s Operating Manual 55 PRE L IMINAR Y Language The VX-200 0d OSD language is initially set to English, but c an also displa y the menu s in German (Deut sch), Spanish (Esp añol), French (Français) or Italian (Italiano). T o change t he OSD language: 1. Press MENU . 2. Press or to select Language from the Main Menu.[...]

Operation 56 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Contra s t: Refer to Contrast on page 43 . Brightne ss : Refer to Brightness on page 42. Color: Refer to Color Saturation on p age 43. Tint: Refer to Tint on page 44. S harpne ss : Refer to Sharpness on page 45. Color Temp.: To adju st the color t emperature, se lect Color Tem p.[...]

Operation Runco VX-2000d Owner’s Operating Manual 57 PRE L IMINAR Y Picture Adjust (Adva nced) To access advanced pic ture quality setting s, select Advanced from the Pic ture Adjust menu. This sub-menu presents the following op tions: ICC Adju s t: Select ICC Adjust from the Advanced Pictur e Adjust menu to cu stomize the displayed color space. [...]

Operation 58 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Video NR: To apply n oise reductio n to the in put signal, selec t Video NR from the Advanced Picture Adju st menu. Nois e reduction is useful for improving the signal-to-n oise ratio of video signals. Set it t o Off, 1, 2 or 3, as needed, keeping in mind that highe r settings (w[...]

Operation Runco VX-2000d Owner’s Operating Manual 59 PRE L IMINAR Y HD/RGB Adj. Select HD/RGB Adj. fr om the Main Men u to view input signal resolution an d timing information. To do this, select Signal In fo from the HD/RGB Adj. me nu. S ignal Info: Select Signal In fo from the HD/RGB Adj. menu to display the resolution, horizontal freque ncy an[...]

Operation 60 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y most accura te colors. If it d oes not, try the other ch oices and s elect the one that does. HDMI Black Level: This contr ol compensates for inco ming elevated black levels present in certain video sig nals. When you s et it to Auto, t he VX-2000d auto matically determines the b[...]

Runco VX-2000d Owner’s Operating Manual 61 PRE L IMINAR Y 5.1 Lamp Replacement The lamp should be replac ed when it reaches the e nd of its life (t ypically 2000 h ours), or sooner if a no ticeable degr adation in b rightness occ urs. Contact your Runco d ealer to obtain a repl acement lamp. 1. Turn off the projector and unp lug the power cor d. [...]

Maintenance and Troublesho oting 62 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guidelines for tr oubleshooting proble ms you may encounter w ith the VX-2 000d. If you encoun ter an issue no t described h ere or in Section 3 (refer to Installa tion Considerations on page 20 ), o[...]

Maintenance and Troubleshooting Runco VX-2000d Owner’s Operating Manual 63 PRE L IMINAR Y Image geometry is incorre ct. • I ncorrect aspect ratio selection. • Select the aspect ratio that best matches the source image and screen size (refer to Table 4-1 ). The projected image is trapezoidal in shape. • The projector is not perpendicular to [...]

Maintenance and Troublesho oting 64 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Note s :[...]

Runco VX-2000d Owner’s Operating Manual 65 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the DHD Contro ller with a ho me theater automation/con trol system or a PC running terminal emulation soft ware, connect it to your control system or PC as shown in Figure 3-11 . Configure the RS-23 2 controlle r or PC serial p ort[...]

Serial Communications 66 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Input S election Command s COMPONENT NA YES Selects the Component input COMPOSITE NA YES Selects the Composite video input HDMI1 NA YES Selects the HDMI 1 in put HDMI2 NA YES Selects the HDMI 2 in put HD1 NA YES Selects the HD 1 in put HD2 NA YES Selects the HD 2 in p[...]

Serial Communications Runco VX-2000d Owner’s Operating Manual 67 PRE L IMINAR Y Picture Adju s t Command s (not available on HDMI 1 or HDMI 2 input s ) BRIGHTNESS -100/100 YES Sets a value for brightness BRIGHTNESS? NA NA Returns brightness setting value CHROMADELAY -12/12 YES Sets a value for input color chroma delay CHROMADELAY? NA NA Re turns [...]

Serial Communications 68 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y Input Po s ition Command s (not available on HDMI 1 or HDMI 2 input s ) IHEIGHT -100/100 YES Sets the value for input height IHEIGHT? NA NA Returns input height value IHPOS -100/100 YES Sets a value for hori zontal input position IHPOS? NA NA Returns input h orizontal[...]

Serial Communications Runco VX-2000d Owner’s Operating Manual 69 PRE L IMINAR Y Mi s cellaneou s Command s BKGND -100/100 YES Sets the background color for 4:3 aspect ratio (-100 = black; 100 = white) BKGND? NA NA Returns background setting value DATE? NA NA Returns projector manufacture date DISPLAY 1 YES Sets display device input source (Always[...]

Serial Communications 70 Runco VX-2000d Owner’s Operating Manual PRE L IMINAR Y TRIGGER 1/3 YES Assigns trigger to curre ntly-selected aspect ratio The following serial commands a re meant to emul ate buttons on the remote con trol or DHD Con - troller front panel. Each button has its own serial command, so effe ctively it is as if you were using[...]

Runco VX-2000d Owner’s Operating Manual 71 PRE L IMINAR Y 7.1 V X -2000d Specifications Table 7-1 lists the VX-2000d specifications. 7. S pecification s Table 7-1. VX-2000d S pecification s Projector Type: Digita l Light Processin g (DLP), single-chip, 16:9 Super Onyx™ DMD Native Re s olution: 1920 x 1080 (1 6:9) A s pect Ratio s : Refer to Tab[...]

Specifications 72 Runco VX-2000d Owner’s Operating Manual P RELI M INARY Brightne ss and Contra s t (variable, depending on RVR calibration): Cinema S tandard s Mea s urement S y s tem (C S M S ) S pecification s - Brightness: 15.6 to 22.4 foot-Lamberts (fL) - Contrast Ratio: 211:1 to 229:1 These measurements are taken from the projector in a con[...]

Specifications Runco VX-2000d Owner’s Operating Manual 73 PRE L IMINAR Y 7.2 DHD Controller Specifications Table 7-2 lists the DHD Co ntroller specifications. Table 7-2. DHD Controller S pecification s A s pect Ratio s : 4:3, Letterbox, 16:9 Anamorph ic, VirtualWide, Cinema , VirtualWide 2.35 Video S tandard s : NTSC, PAL Input s : (1) Composite;[...]

Specifications 74 Runco VX-2000d Owner’s Operating Manual P RELI M INARY 7.3 V X -2000d Dimensions Figure 7-1 shows the VX-200 0d dimensions (all dimensio ns are in inches). Figure 7-1. VX-2000d Dimen s ion s 6.435 7.185 7.450 R 10.680 21.665 20.165 20.870 0 2.235 5.858 (3x) 15.834 (3x) 18.635 0 2.235 7.340 (2x) 1 1.590 (2x) 15.840 (2x) 17.930 R [...]

[...]

Runco CL-810 Owner’ s Operating Manual Runco International • 2900 Faber S treet • Union City , CA 94587 • Ph (510) 324-7777 / (800) 23RUNCO / Fax (510) 324-9300 www .runco.com RUMA-009330 rev 11-16-06 v1.1 SERIAL NUMBER[...]