Ryobi S652D manual

SA VE THIS MANUAL FOR FUTURE REFERENCE Y our sander has been engineered and manufactured to our high standard for dependability , ease of operation, and operator safety . When properly car ed for , it will give you years of rugged, trouble-fr ee performance. WARNING: T o r educe the risk of injury , the user must read and understand the operator’[...]

2  Introduction ..................................................................................................................................................................... 2  W arranty ...............................................................................................................................................[...]

3 GENERAL SAFETY RULES WARNING! Read all instructions. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injury . The term “power tool” in all of the war n- ings listed below refers to your mains-operated (corded) power tool or battery-operated (cordless) power tool. SA VE THESE INSTRUCTIONS WORK [...]

4 GENERAL SAFETY RULES SPECIFIC SAFETY RULES SERVICE  Have your power tool serviced by a qualified repair per son usin g onl y ide ntic al rep lac emen t par ts. This will ensure that the safety of the power tool is maintained. WARNING! T o reduce the risk of injury , user must r ead instruction manual.  When servicing a power tool, use[...]

5 SYMBOLS Some of the following symbols may be used on this product. Please study them and lear n their meaning. Proper interpretation of these symbols will allow you to operate the pr oduct better and safer . SYMBOL NAME DESIGNA TION/EXPLANA TION V V olts V oltage A Amperes Current Hz Hertz Frequency (cycles per second) W W att Power min Minutes T[...]

6 SYMBOLS SERVICE Servicing requir es extreme care and knowledge and should be performed only by a qualified service technician. For service we suggest you return the product to the nearest AUTHORIZED SERVICE CENTER for r epair . When servic- ing, use only identical replacement parts. WARNING: T o a void seri ous pers ona l inju ry , do not atte mp[...]

7 EXTENSION CORDS When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the curr ent the product will draw . An undersized cord will cause a dr op in line voltage, r esulting in overheating and loss of power . Use the chart to determine the minimum wire size requir e[...]

8 FEA TURES Fig. 1 P APER PUNCH T AB lEvER CUSHION ON/Off SWITCH TO TURN Off P APER ClAMP dUST BAg PRODUCT SPECIFICA TIONS Size of Paper ........................................................................................................................................................... 1/4 Sheet Motion ........................................[...]

9 ASSEMBL Y UNP ACKING This product has been shipped completely assembled.  Carefully remove the product and any accessories from the box. Make sur e that all items listed in the packing list are included.  Inspect the product carefully to make sure no breakage or damage occurred during shipping.  Do not discard the packing material until [...]

10 OPERA TION INST ALLING SANDP APER The cushion on the sander gives you the option of using either non-adhesive sandpaper that clamps to the platen or adhe sive backed sandpap er with pre ssur e sensi tive adhesi ve backing that sticks to the cushion. INST ALLING NON-ADHESIVE SANDP APER See Figure 2.  Unplug the sander .  Inspect sandp[...]

11 OPERA TION WARNING: Always wear safety goggles or safety glasses with side shields when operating your sander . Failure to do so could result in foreign objects being thrown into your eyes resulting in possible serious injury . If the sanding operating is dusty , also wear a face or dust mask. SANDP APER SELECTION Selecting the correct size grit[...]

12 OPERA TION ORBIT AL MOTION Orbital motion is ideal for fast cutting action when remov- ing old finishes, smoothing r ough wood, cutting stock down to requir ed dimensions, or for finishing surfaces to be painted. As shown in figure 6, the sandpaper moves in tiny circles at a very high speed, allowing the sander to move easily . REMOVING PRESSURE[...]

13 OPERA TION A TT ACHING SANDER TO V ACUUM See Figure 9. When sanding for an extended period of time, you can easily attach the dust collection system of the sander to a vacuum. T o attach:  Unplug the sander .  Remove dust bag from sander .  Attach vacuum hose to dust exhaust. NOTE: V acuum hose fits inside dust exhaust.  [...]

S652D OPERA TOR’S MANUAL 1/4 SHEET SANDER DOUBLE INSULA TED S652D • P AR TS AND SER VICE Prior to r equesting service or purchasing replacement parts, please obtain your model and serial number from the pr oduct data plate. • MODEL NUMBER • SERIAL NUMBER • HOW TO OBT AIN REPLACEMENT P AR TS: Replacement parts can be purchased online at ww[...]