Samsung 74V manual

Install drivers SAMTRON 73V / 93V / 74V[...]

Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to equipment. Prohibited Important to read and un derstand at all times Do not disassemble Disconnect the plug f rom the outl et Do not touch Groundin g to prevent an electri c shock Power When not used f or an extended period of time, set your comput er t[...]

Do not pull the plug out by the wire nor touch the plug with wet hands. z This may cause an electric shock or fire. Use only a properly grounde d plug and receptacle. z An improper grou nd may cause elec tric shock or equip ment damage. Insert the power plug firmly so that it does not come loose. z A bad connec tion may cause fire. Do not excessive[...]

z This may cause damage to the product or human b ody. Install the monitor base in a showcase or shelf so that the end of the base does not project beyond the showcase or shelf. z Dropping the pro duct may cause damage to the pro duct or personal injury. Do not place the product on an uns table or small surface area. z Place the produ ct on an even[...]

z Installation by unqualifi ed personnel may result in injury. z Always us e the mounting device spec ified in th e owner's manua l. When installing the product, make sure to keep it away from the wall (more than 10cm/4inch ) for ventilation purposes. z Poor ventilatio n may cause an increase in the in ternal temp erature of the product, resul[...]

Contact the Service Center or Customer Center for interi or cleaning once a year. z Keep the pr oduct's int erior clean . Dust whic h has accumulate d in the int erior over an extended p eriod of time may ca use malfunction or fi re. Others Do not remove cover (or ba ck). z This may cause an electric shock or fire. z Refer servicing to qua lif[...]

Do not cover the vents on the monitor cabinet. z Bad ventilation may cause a b reakdown or fire . Do not place water containe rs, chemical products or small metal objects on the monitor. z This may cause malfunctio n, an electric sh ock or fire. z If a foreign substan ce enters the mo nitor, unplug the po wer cord and contact the Servic e Center . [...]

Do not install the product on an unstable, uneven surface or a location prone to vibrations. z Dropping the produ ct may cause da mage to the produ ct or personal in jury. Using the prod uct in a location p rone to vibration s may shorten th e lifetime of the product or may catch fire . When moving the monitor, turn off and unplug the power cord. M[...]

Please make sure the following ite ms are included with your monitor. If an y items are miss in g , contact y our deale r . Unpacking Monitor Monito r Bottom Han g er Manual Quick Setup Guide Warranty Card (Not availa ble in all lo cations) User's Guide, Monitor Drive r Cable D-Sub Cable Power Cord SAMTRON 73V / 74V[...]

Front 1. Menu button [ ] Use th is button for open the on-screen menu and e xits from the menu screen or clos es screen adjust ment menu. 2,3. Adjust buttons [ ] Use this button for naviga te and select menus or adju st the menu items in the menu screen. 3. Brightness button [ ] When OSD is not on the screen, Push the b utton to adjust brightn ess.[...]

(The configuration at the back of the monitor may va ry from product to product.) 1. Power port Connect th e power cord for yo ur monitor to the power port on the back of t he monitor. 2. D-sub 15-pin port Connect the signa l cable to the 15-pin, D-sub co nnector on the ba ck of your monitor. 3. Kensington Lock The Kensi ngton lock is a device used[...]

y items are missin g , contact y our dealer . Please make sure the follow ing items are included with your monitor. If an Unpacking Monitor Monitor Manual Quick Setup Guide Warranty Card User's Guide, Monitor Dirver Cable SAMTRON 93V[...]

Front 1. Menu button [ ] Use th is button for open the on-screen menu and e xits from the menu screen or clos es screen adjustm ent menu. 2,4. Adjust buttons [ ] Adjust items in the menu . 3. Power button [ ] / Power indicator Use this button for turn t he monitor on and off./ This light glows green during normal o peration, and blinks green once a[...]

Rear (The configuration at the back of the monitor may va ry from product to product.) 1. Power port Connect th e power cord for yo ur monitor to t he power port on the back of t he monitor. 2. D-sub 15-pin port Connect the signa l cable to the 15-pin, D-sub co nnector on the ba ck of your monitor. 3. Kensington Lock The Kensingt on lock is a devic[...]

1. Connect th e power cord for yo ur monitor to t he power port on th e back of the mon itor. Plug the power cord for the m onitor into a nearby outlet. 2-1. Using the D-sub (A nalog) connector on t he video card. Connect the sig nal cable to th e 15-pin, D -sub connector on the back of your m onitor. 2-2. Connecte d to a Macint osh. Connect the m [...]

1. Monitor and B ottom 2. Monitor and H anger Attaching a base This monit or accepts a 100 m m x 100 mm V ESA-complian t mounting in terface pad. A . Monitor B . Mounting interface pad 1 . Turn off your monitor and un plug its power cord . 2 . Lay the LCD mo nitor face-down o n a flat surface wi th a cushion ben eath it to protect the screen. 3 . R[...]

1. Insert CD into the C D-ROM drive. 2. Click "Windows XP/2000 Driver" 3. Choose your m onitor model in the model list, then click the "OK" button. 4. If you can see following me ssage window, th en click the "Continue Anyway" button. Then click "OK" button. 5. Monitor driver installation is co mpleted. This [...]

4. Click the " Properties " but ton on the " Monitor " tab and sele ct " Driver " tab. 5. Click " Update Driver.. " and selec t " Install from a l ist or.. " then click " Next " button. 6. Select " Don't search ,I wi ll.. " then click " Nex t " and then click "[...]

8. If you can see following " Mess age " window , then click t he " Continue Anyway " button. Then click " OK " button. This moni tor driver is under certif ie d MS logo,and this instal lation doe sn't damage your system.Th e certifie d driver will be posted on Samt ron Monitor h omepage. http://www.samtron.com/ 9[...]

3. Choose th e " Settings " tab and then c lick " Advanced .. ". 4. Choose " Monitor ". 5. Click " Driv er " and th en click on " Update Drive r.. " then click on the "Ne xt" button. 6. Choose " Display a list of the known drivers for this device so that I can choose a specific driver[...]

1. Connect the power cord for your monitor to the power port on the back of the monitor. Plug the power cord for the monitor into a nearby out let. 2-1. Using the D-su b (Analog) connecto r on the video card. Connect the signal cable to the 15-pin, D-sub connector on the back of your moni tor. 2-2. Connected to a Macintosh. Connect the moni tor to [...]

A g e" window, then click the "Continue An y wa y " button. Then Attaching a base This monitor accepts a 100 mm x 10 0 mm VESA-compli ant mounting in terface pad. A .Monitor B .Mounting int erface pad 1 . Turn off your monitor and unplug its po wer cord. 2 . Lay the LCD monitor face-d own on a flat surface with a cushion beneath it t[...]

click "OK" button. 5. Monitor driver installation is completed. This monitor driver is und er certifying MS logo,and this installation don' t damage your system.The certified driver will be posted on Samsung Monitor Homepage http://www.samtron.com/ Windows XP | Windows 2000 | Windows NT | Lin ux When prompted by the operating system [...]

4. Click the " Properties " button on the " Monitor " tab and select " Driver " tab. 5. Click " Update Driver.. " and select " Insta ll from a list o r.. " then click " Next " button. 6. Select " Don't search ,I will.. " then click " Next " and then cl ick " H[...]

8. If you can see following " Message " window, then click the " Continue Anyway " bu tton. Then click " OK " button. This monitor driver is under certifying MS logo,and this installation don't damage your system.The certified driver will be posted on Sam sung Monitor Homepage http://www.samtron.com/ 9. Click the [...]

1. Choose " OK " button on the " Insert disk " window. 2. Click the " Browse " button on the " File Needed " window. 3. Choose A:(D:Driver) then click the "Open" button and then click " OK " button. How to install 1. Click " Start " , " Setting " , " Control Panel[...]

1. Opens the OSD menu. Also u se to exit the OS D men u or return to the pr evious menu. 2. This button s allows you to adjust ite ms in the me nu. 3. This button s allows you to adjust ite ms in the me nu. 4. Press this button activate s a highlighted men u item. AUTO SAMTRON 73V / 74V[...]

Menu Description AUTO When the ' AUTO ' bu tton is presse d, the Auto Ad justment scree n appears as shown in the animated screen o n the center. Auto adju stment allows the monito r to self-adju st to the inc oming video si gnal. The values of fine , coa rse and po si ti on are ad ju ste d au tom atically. To make the autom atic adjustme[...]

1. Picture Brightne ss Contrast 2. Color Color Tone Color Control Gamma 3. Image Coar se Fine Sharpness H-Position V- Position 4. OSD Language H-Po sition V-Position Transp arency Display Time 5. Setup Image Reset Color Reset 6. Information Picture Menu Description Play/Stop Brightness You can use t he on-screen me nus to change th e brightnes s ac[...]

Menu Description Play/Stop Color Tone The tone of the co lor can be chan ged and one of four modes can be select ed - Cool, norm al, Warm and C ustom. Color Control Adju sts individu al R,G,B color ba lance. Gamma Select one o f three pre-def ined gammas. z Mode 1 : Show s normal gamm a z Mode 2 : Shows higher gamma (brighter ) z Mode 3 : Show s lo[...]

Fine Remove s noise such as horizontal s tripes. If the nois e persists even after fine tuni ng, repeat it after a djusting the freque ncy (clock speed). Sharpness Changes the clea rance of imag e. H-Position Changes the h orizontal po sition of the mo nitor's entire display. V-Position Changes t he vertical po sition of t he monitor's e [...]

Menu Description Play/Stop Image Reset Image parameters a re replaced wi th the factory default values. Color Reset Color parame ters are replac ed with the factory defau lt values. Information Menu Description Information Shows a video sour ce, display mode on the OSD scree n.[...]

1. Opens the OSD menu. Also u se to exit the OSD m enu or return to the previous m enu. 2. This button s allows you to adjust ite ms in the me nu. 3. This button s allows you to adjust ite ms in the me nu. 4. Press this button activate s a highlighted men u item. AUTO SAMTRON 93V[...]

Menu Description AUTO When the ' AUTO ' bu tton is pressed, t he Auto Adjus tment screen app ears as shown in the an imated screen on t he center. Auto adju stment allo ws the monit or to self-ad just to the incoming vide o signal. The values of fine, coa rse and position are ad justed automatical ly. To make the autom atic adjustment fun[...]

1. Picture Bri ghtness Contrast 2. Color Color Tone Color Control Gamm a 3. Image Coarse Fine Sharpn ess H-Position V-Position 4. OSD Language H-Position V-Position Transparency Di splay Ti me 5. Setup Image Res et Color Reset 6. Information Picture Menu Description Play/Stop Brightness Adjust the B rightness . Direct Ac cess Featur e : When OSD is[...]

Menu Description Play/Stop Color Tone The tone of the colo r can be chan ged and one of f our modes can be selecte d - Cool, normal , Warm and Cust om. Color Control Follow these steps to adjust in dividual R,G,B color bala nce. Gamma Select one o f three pre-defin ed gammas. Image Menu Description Play/Stop Coarse Removes noise su ch as vertical s[...]

repeat it afte r adjusting th e frequency (c lock speed). Sharpness Follow these instuction to change the cl earance of im age. H-Position Follow these in structions to change th e horizontal position of the monitor's entire display . V-Position Follow these instructio ns to change the vertica l position of the monitor's entire display . [...]

Menu Description Play/Stop Image Reset Image parameters a re replaced with the factory default va lues. Color Reset Color parameters a re replaced wi th the factory default valu es. Information Menu Description Information Shows a video so urce, displa y mode on the OSD sc reen.[...]

Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do n eed assistance, please call, the phone number on the In formation section or contact your dealer . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the power cord connecte d properly? Ch[...]

system is rebooted.) There is no image on the screen. Is the power indica tor on the monitor blinking at 1 seco nd intervals? The monitor is in PowerSaver mode. press a key on the keyboard to activate the moni tor and restor e the image on the screen. The screen shows strange colors or just black and white. Is the screen di splaying only one color [...]

Q & A Question Answer How can I change the frequency? Frequency can be change d by reconfiguring the video card . Note that video card support can vary, depend ing on the version o f the driver used. (Refe r to the computer or th e video card manual for details.) How can I adjust the resolution? Windows ME/XP/2000 : Set the resolution at the Co[...]

Warning Messages If there is something wrong with t he input signa l, a message appears on the screen or the screen goes blank although the power indic ator LED is still on. The message may indicate that the monitor is out of scan range or that you ne ed to check the s ignal cable. Environment The location and the position of the monitor may influe[...]

General General Mo d e l N a me S A MT R O N 7 3 V / 74V LCD Pan el Size 17inch Diagonal Display area 337.9 2 (H) x 270.336 (V) Pixel Pitch 0.264mm (H) x 0.264mm (V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution Optimum reso lution 1280 x 1024@ 60 Hz Maximum resolut[...]

382.0 x 175.0 x 383.7 mm / 16 .9 x 6.9 x 15.1 i nch (with Basic St and)/4.55kg VESA Mounting Interface 100mm x 100mm (f or use with S pecialty(Arm ) Mounting ha rdware.) Environmental considerations Operating Temperatu re: 50°F ~ 104°F(10°C ~ 40°C) Humidity: 10% ~ 80%, non -co nd en si ng Storage Temperature: -4°F ~113°F (-20°C ~ 45°C) Humi[...]

IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.667 30.240 -/- MAC, 832 x 624 49.726 74.551 57.284 -/- MAC, 1152 x 870 68. 681 75.062 100.00 -/- VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 640 x 480 37.861 72.809 31.500 -/- VESA, 800 x 600 35.156 56.250 36.000 -/- VESA, 800 x 600 37.879 60.317 40.000 +/+ VESA, 800 x 600 46.875 7[...]

General General Mo d el N a me SAMT R O N 9 3 V LCD Panel Size 19inch Diagonal Display ar ea 372.32 (H) x 301. 56 (V) Pixel Pitch 0.294mm (H) x 0.294mm (V) Type a-si TFT active matrix Synchronization Horizontal 31 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16,194,277 Colors Resolution Optimum resolution 1280 x 1024@60 Hz Maximum resolution 1280 x 1[...]

428.0 X 61.8 X 357.5 mm / 16.9 x 2.4 x 14.1 inch (W ithout Stand) 428.0 X 204.0 X 433.0 mm / 16. 9 x 8.0 x 17.0 inch (With Ba sic Stand) / 6.25kg VESA Mounting Interface 100mm x 100mm (f or use with S pecialty( Arm) Mounting hardware.) Environmental considerations Operating Temperature: 50°F ~ 104°F(10°C ~ 40°C) Humidity: 10% ~ 80% , non-conden[...]

IBM, 720 x 400 31.469 70.087 28.322 -/+ MAC, 640 x 480 35.000 66.66 7 30.240 -/- MAC, 832 x 624 49.726 74.55 1 57.284 -/- MAC, 1152 x 870 68. 681 75.062 100.00 -/- VESA, 640 x 480 37.500 75. 000 31.500 -/- VESA, 640 x 480 37.861 72. 809 31.500 -/- VESA, 800 x 600 35.156 56. 250 36.000 -/- VESA, 800 x 600 37.879 60. 317 40.000 +/+ VESA, 800 x 600 46[...]

SAMTRON CANADA SAMSUNG ELECTRONICS CANADA INC. 7037 FINANCIAL DRIVE MISSISSAUGA, ONTARIO L5N 6R3 TEL : 1-800-726-786 4 FAX : 905-542-119 9 SAMTRON EUROPE SAMSUNG ELECTRONICS GMBH SAMSUNG-HAUS, AM KRONBERG ER HANG 6 65824 SCHWALBACH/TS., GERMANY TEL: 49 (0180) 512121 3* FAX: 49 (0180) 512121 4* * DM 0,24/MIN. SAMTRON SEOUL 15TH FL, JOONGANG DAILY NE[...]

SAMTRON TOKYO 17TH, HAMACHO CENTER BLDG. 2-31-1, NIHONBASHI-HAMACHO, CHOU-KU, TOKYO 103, JAPAN TEL : (81-3) 5641-9860 FAX : (81-3) 5641-9861 SAMTRON U.S.A. SAMTRON COMPUTER PRODUCTS CUSTOMER SERVICE 400 Valley Road Suite 20 1, Mt. Arlingt on, NJ 07856 TEL : 973-601-6200, FAX : 973-6 01-6001 1-800-SAMTRON (1-800-726-8766) Terms Dot Pitch The image o[...]

{ Resolution: 1280 x 1024 { Vertical frequency (refresh rate): 60 Hz 3. When you clean the monito r and the panel outside, please apply the recommen ded small amount of cleaner by using soft and dry cloth and polish it. Let LCD area not to be forced but t o be scrubbed out softly. If excessive force is ap plied, you can have a stain on it. 4. If yo[...]

FCC Information | IC Compliance No tice | MPR II Compliance European Not ice (Europe o nly) | PCT Notice | VCCI | TCO'95-Ecolo gical requireme nts for persona l computers (TCO' 95 applied model only) TCO'99-Ecolo gical requireme nts for persona l computers (TCO' 99 applied model only) TCO'03-Ecolo gical requireme nts for pe[...]

MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendations for reduced electric and magnetic fields. PCT Notice VCCI This is a Class B product based on the st andard of the Voluntary Control Council for Interference by Information Te chnology Equipment (VCCI). If this is used near a radio or television receiver in a domestic enviro[...]

There are also other characteristics of a monitor, such as energy consumption levels, that are important from both the working and natural environment viewpoints. Since all types of conventional electricity generation have a negative effect on the environment (acid ic and climate-influencing emissions, radi oactive waste, etc.) it is vita l to cons[...]

electronics components concer ned with the display unit. CFCs (freons) CFCs (freons) are sometimes used for washing pr inted circuit boards and in the manufacturing of expanded foam for packagin g. CFCs break down ozone an d thereby damage the ozone layer in the stra tosphere, causin g increased rece ption on Earth of ultraviolet light with consequ[...]

via the Internet, using the address: http://www.tc o-info.com/ Environmental requirements Flame retardants Flame retardants are present in printed circuit boards, cabl es, wires, casings and housings. Their purpose is to prevent, or at least to delay th e spread of fire. Up to 30% of the plastic in a computer casing can consist of flame reta rdant [...]

Energy z Energy-saving mode after a certain time ?benef icial both for the user and the environment z Electrical safety Emissions z Electromagnetic fields z Noise emissions Ecology z The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 000 z Restrictions on o ch[...]

This equipment has bee n tested and found to compl y with the limits for medical devices to the IEC 601-1-2:1994. These limits are designed to provide reasonabl e protection aga inst harmful interference in a typical medical installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accorda[...]

PRODUCT INFORMATION (Image Retention Free) LCD Monitors and TVs may have image retentio n when switching from one image to another especially after displaying a st ationary image for a long time. This guide is to demonstrate corre ct usage of LCD products in order to protect them from Image retention. What is Ima g e retention ? During normal opera[...]

The best way to protect your monitor from Image retention is to set your PC or S y stem to o p erate a Scre en Saver p ro g ram when y ou are not usin g it. Image retention may no t occur when a LCD pane l is operated under normal conditions. Normal conditions are defined as continuous ly changing video patterns. When the LCD panel is operated for [...]