Samsung 911NT manual

Install drivers Install p ro g rams !! !! SyncMaster 711NT/ 911NT[...]

Notation Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to the equipment . Prohibited Important to read and understand at all times Do not disassembl e Disconnect the plug f rom the outl et Do not to uch Ground t o prevent an el ectric shock Powe r When not used f or extended perio d of time, set your [...]

Do not use a damaged o r loose plug . This may caus e electric shock or fire. Do not pul l the plug out by the wi re nor touc h the plug with wet ha nds. This may caus e electric shock or fire. Use only a pr operly grounde d plug and rece ptacle. An improper ground may cau se electric sh ock or equip ment damage . (Class l Equipment on ly.) Insert [...]

To disconnect the apparatu s from the mai ns, the plug must be pull ed out from the mains sock et, therefo re the mains plu g shall be read ily operable. This may caus e electric shock or fire. Installation Be sure to conta ct an authorize d Service Cente r when inst alling you r set in a loc ation with heav y dust, high or low tempera tures, high [...]

TO PREVENT THE SPREAD OF FIRE , KEEP CA NDLES OR OTHER OPEN FLAMES AWAY FROM THIS PR ODUCT AT ALL TIMES. Otherwise, this ma y cause fire. Keep any he ating devices aw ay from the power cabl e. A melted coating may cause electric shock or f ire. Do not instal l the product in places with p oor ventilation , for instance , a bookshelf, closet, etc. A[...]

The plastic packaging (bag ) may cause suffo cation if chi ldren play with it. Cleanin g and Usin g When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft fabric. Do not spray water or detergent d irectly onto the monito r. This may caus e damage, el ectric shock or fire. Use the recom mended deter[...]

cause a malfunctio n or fire. Others Do not remo ve the cover (or back). This may cause electric s hock or fire. Refer to a qual ified servici ng company. If your monitor d oes not opera te normally - in particu lar, if there i s any unus ual sound or smell coming f rom the moni tor - unplug it immediate ly and contac t an authorize d dealer or the[...]

This may cau se a breakdo wn, electr ic shock or fir e due to damage to the cable . Do not cover the ve nts on the moni tor cabinet. Bad ventilation may cause a b reakdown o r fire. Do not place water containe rs, chemical products or smal l metal obje cts on the monitor. This may cause a m alfunction, el ectric shock or fire. If a foreign subs tan[...]

Keep the vo lume at a comf ortable le vel when usi ng the head phones. Excessive ly loud v olume le vel may d amage hea ring. Viewing the m onitor continuo usly at a too c lose angle m ay result in da mage to yo ur eyesight. To ease eye s train, take at least a five-mi nute break a fter every hou r of using the monitor. Do not install t he product [...]

When lifting up or moving th e monitor, do not lift the monito r upside down while holding onl y the stand. This may cause yo ur monitor to fal l, and become da maged or ca use persona l injury. Pro p er Seatin g Posture Durin g Monitor Use Try to maintain a good postu re when us ing the monit or. z Keep your back strai ght. z Keep a distanc e of a[...]

Features What is a network monitor? A network moni tor can be used for the same purposes as a common mo nitor. It also pr ovides the functionalitie s of most co mputers, such as an Internet co nnection, creat ing documen ts, editing images, via a co nnection to the host PC o ver the L AN. In addi tion, it al lo ws you to connect an external device [...]

Packa g e Contents Please mak e sure the follo wing items a re included with your mo nitor. If any items are missing, co ntact your de aler . Contact a lo cal dealer to buy optional items. Un p ackin g Without st and With Stand Manual Quick Setup Guide Warranty Card (Not availa ble in al l locations ) User's Guide, Monitor Driver, Natural Colo[...]

Y our Monito r Front MENU button [ ] Opens the OSD menu. Also use to exit the OSD menu o r return to the previous menu. MagicBri ght™ button [] MagicBright™ is a new fe ature provid ing optim um viewing environme nt depending on the contents of th e image you are watching. Cu rrently six different modes are a vailable : Custom, Text, I nternet,[...]

For watching mo tion pictures such as a DVD o r Video CD. >> Click here to see an an imation clip Volume butto n [ ] When OSD is not on the screen, push the button to a djust volume. Adjust bu ttons [ ] Adjust it ems in the me nu. Enter button [ ] / SOURCE button Activates a hig hlighted menu item. / Push the 'SOURCE', t hen selects[...]

RS-232C Co nnection Termi nal Connect a RS-232 C cable to this terminal. VGA OUT port Connect a monitor to another monitor th rough a D-Su b cable. Kensington Lock The Kensi ngton loc k is a devic e used to ph ysically fix the syste m when using it in a public plac e. The lockin g device has to be purchased separately. For using a lock ing device, [...]

Connectin g Cables Connectin g Cables ( When used as a normal monitor ) Connect th e power cord for yo ur monitor to t he power port on th e back of the monitor. Plug the power cord for the m onitor into a nearby outlet. Use appr opriate connec tion for yo ur computer. Using the D -sub (Analo g) connector o n the video card. - Connect t he D-Sub Ca[...]

USB (USB Connecti on Terminal) Connect USB devices such as a m ouse, keyboard a nd external storage device s (DSC, MP3, ext ernal storage, etc.). LAN (LAN Connec tion Terminal ) Connec t the LAN cab le. RS-232C Co nnection Termi nal Connect a RS-232 C cable to this te rminal. D-sub 15-pin p ort [VGA OUT] Use it by conn ecting it to a nother monito [...]

You can tilt the monitor screen forward to adjust th e angle to a particular angle. Swivel stand You can easily adjust the p osition of the mon itor screen from right to left u sing the rotating stand. Rubber stubs are attach ed at the botto m of the mo nitor to help fix it to the installatio n location. Usin g Other Stands Attachin g a Base This m[...]

z For wall moun ts that do not com ply with VESA standard screw specifications , the length of the screws may differ depend ing on their specificat ions. z Do not use screws that do not co mply wi th the VESA sta ndard screw specifications. Do not fasten the scre ws too tightly, as this may damage the product or cause the pr oduct to fall, leadin g[...]

Connectin g a Client Monito r Host PC Hub LAN Cable Monito r Connect the powe r cord to the power termina l at the back o f the monitor. Connect t he mouse and the keyboard t o the USB por ts. Connect the L AN port on the back of the monitor and the hub. Connect the h ub and the LA N port of the hos t PC. The host PC must have a n IP address . A ft[...]

Setu p Client Monito r The Thin Cli ent Setup Wi zard is execu ted when a thin client is installed for th e first time, data a re not backed up after update, o r the Reset the term inal to factory def ault settings check bo x is checked on Control Panel -> Sy stem. The Thin Cl ient Setup W izard helps con figure basic s ettings. The pr ocedure f[...]

Configure t he resolution , the color sett ings, and the scre ensaver. Then cli ck Next . Select the shell interfac e to use with the t erminal. Click Next to pr oceed to the next step .[...]

In the next wi ndow, set the o ther termi nal proper tie s and click on Next. For more informatio n on terminal properties, re fer to Configurin g the Client Monitor Enviro nment. If you want to chan ge any of th e settings you have con figured, click on Back or click on Fi nish to complete the Setup Wizard. The thin client then comple tes the Setu[...]

Connectin g to the Host PC You can add, ed it or remove conne ctions using the Terminal Conn ection Ma nager (Thin Clie nt Shell) or the icon/menus on the Desktop. However, th is function requires ad ministrato r privileges. If you logged on as a limited u ser, the menus for configuring connection s are hidden or deactivated. If you click the Add b[...]

Enter the na me that will be di splayed in th e list on the Term inal Connecti on Manager (or as a connection ic on on the Desk top) and click Ne xt. When you conn ect to the serve r, the server’s D esktop is displa yed on the mon itor, by default. If you want t o start an appl ication when co nnected, ent er its name and w orking directo ry. Cli[...]

Select comp ression, enc ryption, an d sound option s for ICA connect ion. Enter the inform ation required to p a ss firewalls or security policies. Microsoft Remote De sktop Clinet Enter a nam e for the connec tion and h ost PC’s name . The name you e nter will be displayed in the list on the Te rminal Connectio n Manager (or as a co nnection ic[...]

When connected to the host PC , Window N T Desktop is displ ayed on the m onitor, by defau lt. If you want to s tart an applicati on when conne cted, enter its path and fil e name. Click Next to proceed to the fin al step. Save the new connection and finish the WTS Connection W izard. If you want to chan ge settings, select a new set ting and clic [...]

General : Displ ays informatio n such as the co nnection name and the ho st PC name when auto login is se lected. Display : Configu res the screen resolu tion. Make sure to set a value higher th an the minimum value that the computer you w ant to connect to supports. Local Reso urces Remote Comput er Sound : You can config ure the sound so that you[...]

Local Device : Sel ect one of th e external devi ces which are being connected to the host PC computer you w ant to connect to. Programs : Sp ecify what is di splayed on th e first screen wh en connected. You can select t he Desktop or an application progra m. Experience : You can configure t he commun ications sp eed between your terminal and the [...]

Terminal Connecti on Manager Connecti ons Tab. ① Connec t : Selects the host PC to connect to, or opens an Intern et window. ② Shutdown : Icons/Menus on th e Desktop (Des ktop Shell) : Start > Shut down You can shut down or resta rt the system . ③ Setup : Icons/Menus on th e Desktop (Des ktop Shell) : Start>Settin gs>Control Pane l Y[...]

in the Configu re tab of the Term inal Connec tion Wizard or close the conn ection window. The Close button is only acti vated if the sele cted connecti on is being c onnected. ※ Using shortcut ke ys when mul tiple connectio ns are running : Ctrl + Alt + End: Displays either the Terminal Connection Wizard (for Thin Client Shel l) or the Desktop ([...]

Select a port to use with pri nter, a printer manufactu rer, and printer. If you set the ad ded printer as the default printer, pr inting is performed with this printer unle ss you specify a d ifferent pri nter. If you double-cl ick an existin g printer icon or click the Op en button, t he Printer Prope rties window is displaye d, which allo ws you[...]

Network With Network in Control Pa nel, you ca n view the list of adap ters installed in the t erminal. To change the p roperties of an adapter, cl ick Propertie s after selecting it . You can change IP address and host PC’s name. System The Terminal Information ta b shows manufact urer, product in formation, OS version, and memory information, e[...]

specified w aiting time. You need t o restart yo ur term inal to apply Disp lay setting chang es. ICA Client Setup If you double-click IC A Client Setup, the Gl obal ICA Clie nt Settings windo w is displayed. With the Keyboard Shortcuts tab , you can configure shortcut keys. Som e shortcut key s are used to control operation s of the ICA Co nnectio[...]

Next, all system settin gs are save d with the existing values and yo ur terminal is resta rted. If you want to conf igure you r terminal wi th fresh new settings, unselect th e ‘Reset the s ystem usi ng the save configura tion file’ opt ion and click o n Next. The next steps are the same as the steps when setting up your term inal for the firs[...]

1. You can ente r basic inform ation using th e Terminal Loca l Account g roup. The user name is the re quired item to create a new a ccount. (You cannot use symbolic ch aracters and you can use up to 20 ch aracters. If you want to set a password fo r an account, se t a password wit hin 20 characters long and make sure to confirm your password.) 2.[...]

If you want to app ly the login fu nctionality in order to allow a ccess for allo wed users on ly, check the Use login funct ion check box. If you do not check this check box, the selected account is the same with th e administrator acco unt. If you check th e Use login func tion check box, th e Auto Login an d the Set s creensaver pas sword che ck[...]

4) The automatic rotation function is only available when the monitor is directly connected to a PC. Client monitor does not s upport the automatic rotation function. 5) Restrictions of the Windows 2000 Server Op erating System z Only Low Colo r (256 colors ) screen quality i s supported. z You cannot find the U SB device connected to the monitor f[...]

Monitor Driver When prompted by the operating system for the monitor driver, in sert the CD-ROM inc luded with thi s monitor. Driver i nstallation is sl ightly differen t from one op erating system to another. Foll ow the directions a ppropriate for the operatin g system you have. Prepare a blank disk an d download th e driver prog ram file at t he[...]

This monitor driver i s under certifying MS logo, and th is installation does n't damage your system. The certi fied driver wi ll be posted on Samsung Mon itor homepa ge http://www.samsung. com/ Monitor driver installation is comple ted. Installin g the Monitor Driver ( Manual ) Windows V ista | Windows X P | Wind ows 2000 | Window s ME | Wind[...]

Click "Properties" in the "M onitor" tab. If th e "Properties" bu tton is deactivated , it means the configura tion for you r monitor is com pleted. The mo nitor can be u sed as is. If the message “Windows needs …” is displayed, a s shown in the figure be low, click "Continue". This monitor d river is u[...]

Click "Have Disk…" and select the folde r (for example, D :Drive) where the driver setup f ile is located, an d click "OK". Select th e model that matches your m onitor from the list of mo nitor models on the screen, a nd click "Nex t". Click "Close" → "Close" → "OK" → "OK&qu[...]

Click "Disp lay" icon and choo se the "Settin gs" tab then click "Adva nced." Click the "Prope rties" but ton on the "Moni tor" tab an d select "Driver" ta b. Click "Upd ate Driver." an d select "Ins tall from a list or." then click the "Next" button . Select [...]

Click the "Browse" b utton then ch oose A:(D:Dri ver) and choos e your monito r model in t he model list and click the "Next" bu tton. If you can see following "Mes sage" window, then click the "Con tinue Anyway" but ton. Then click the "OK" button. This monitor d river is under certifyi ng MS logo[...]

Monitor driver installation is comple ted. Micros oft ® Windows ® 2000 Opera ting System When you can see "Digit al Signatur e Not Found" o n your monito r, follow thes e steps. How to install Choose the "OK " button on the "Insert disk" window. Click the "B rowse" button on the "File Need ed" win[...]

Click "Start," "Se ttings," "Control P anel," and then d ouble-click "Displ ay" icon. In the Display Registration Info rmation window, cl ick the Settin gs tab and then click "All Display Modes". Select a mod e that you wis h to use (Resolu tion, Number of colors and V ertical frequency ) and then c[...]

Installin g the Natural Color Software Insert the CD includ ed with the Samsu ng monitor in to the CD-ROM D rive. The initia l Natural Color screen will appear. Click on Natura l Color in the startup window to in stall the Natural C olor software. To install t he program ma nually, inse rt the CD include d with the Sam sung monito r into the CD-RO [...]

Hardware z 32MB Memory abov e z 60MB Hard d isk space above * For more information, visit the MagicTune™ webs ite . Uninstall The MagicTu ne™ program can be remo ved only b y using the "Add or Remo ve Progra ms" option of the Windows® Con trol Panel. Perform the fo llowing step s remove MagicTu ne™. 1. Go to [Task Tray] ' [Sta[...]

Control Buttons [ ] Opens the OSD menu. Also use to e xit the OSD menu or return to the previous menu. [ ] These buttons al low you to ad just items in the menu. [ ] Press this button to Act ivates a highli ghted menu item. [AUTO] When the 'AUTO' button is p ressed, the Auto Adjustment screen appears as shown in the animated s creen on th[...]

Direct Functions AUTO Menu Descript ion AUTO When the 'AU TO' button is pressed, the Auto Adjustmen t screen appear s as shown in the animated s creen on the center. The values of fine, coa rse and positi on are adjusted au tomatically. To make the au tomatic adjustment fun ction sharper, exec ute the 'AUTO' functio n while the [...]

In case of push ing MENU bu tton after lock ing OSD Menu Descript ion OSD Lock & Unlock This is the function th at locks the OS D in order to keep the current states o f settings or prevent ot hers from adju sting the curre nt setting s. Lock : Ho ld down the m enu button for m ore than five (5) secon ds to activate the OSD adjust ment lock fun[...]

Ma g icBri g ht™ Menu Descript ion MagicBrigh t™ Push the Mag icBright™ but ton to circle thro ugh availa ble preconfig ured modes. - Six different mo des (Custom/Te xt/Internet/Game /Sport/Movie) V olume Menu Descript ion[...]

Volume When OSD is not o n the screen, push [ ▲ / ] the button to adjust volume. SOURCE Menu Descript ion SOURCE Selects the Video sign al whil e the OSD is off. (Analog /Client) OSD Function Picture Brightness Contrast Color MagicColor Color Tone Color Control Gamm a Image Coarse Fine Sharpness H-Position V-Position OSD Language H-Posi tion V-Po[...]

Menu Description P lay/Stop Brightness You can use t he on-screen menus to change the brightness accord ing to personal pre ference. MENU → → → , → MENU Contrast You can use t he on-screen menus to change the contrast according t o personal pre ference. ( Not available in MagicColor mod e of Full and Intelligent. ) MENU → → , → → , [...]

Menu Description P lay/Stop MagicColor MagicColo r is a new techno logy that Samsu ng has exclusiv ely developed to improve di gital image and to displa y natural col or more clearly wit hout disturbing image qua lity. Off Returns to the o riginal mo de. Demo The screen before app lying MagicColor app ears on the right and the screen a fter applyi [...]

Menu Description P lay/Stop Coarse Removes nois e such as ve rtical stripes. Coarse adjust ment may move the screen image ar ea. You may relocate it to the center using th e horizontal co ntrol menu. MENU → , → → → , → MENU A vailable in an alog Mode Onl y Fine Removes nois e such as horizo ntal stripes. If the noise persists even afte r [...]

OSD Menu Descri ption Play/St op Language You can choose one of the nine languages. MENU → , → → → , → MENU The languag e chosen a ffects only the language of the OSD. It has no effect on an y software running on the computer. H-Pos ition You can chan ge the hor izontal posi tion where t he OSD menu appears on yo ur monitor. MENU → , ?[...]

Menu Descripti on Play/Stop Image Res et Image parameters a re replaced with the fa ctory default values. MENU → , → → → , → MENU Color Reset Color para meters are repl aced with t he factory def ault values. MENU → , → → , → → , → MENU Information[...]

Menu Descript ion Information Shows a vide o source, disp lay mode on the OS D screen. MENU → ,[...]

Check List Before calling for s ervice, check the informatio n in this se ction to see if y ou can remedy any problems yourself. If you do need assistanc e, please ca ll the pho ne number o n the Information section or con tact your deal er . Symptom Check List Solutions No images on the screen. I cannot turn on th e monitor. Is the power cord conn[...]

on the screen. Is the power indicat or on the monitor bl inking at 1 second intervals? Press a key on the k eyboard to a ctivate the monit or and restore the im age on the screen. If there is still no image, press th e 'SOURCE' but ton. Then press any key on the keyboard agai n to activate the monito r and restore the image on the screen [...]

monitor, Plug & Play (VESA DDC) monitor found". manual to see if the Plug & Play (VESA DDC) function can be supported. Installation Instru ctions . Problems related to Audio No sound Ensure that the audio cable is firml y connected to both the audio-in port on y our monitor and the audio -out port on your sound card. (Refer to Connec t[...]

and 'Password' of the 'Remo te Desktop' with those of the host PC. I cannot access the Internet in the Client screen. 1) Check if the Hub port LED to which th e LAN cable is co nnected bli nks. If not , that indicates that the LAN con nection is disconnected. In this case, conn ect using another LA N cable. 2) Check if the s ett[...]

How can I adjust th e resolution? Windows XP : Set the resolu tion at the Co ntrol Panel → Appearance and Themes → Display → Settings. Windows M E/2000 : Set the resolu tion at the Co ntrol Panel → Display → Settings. Contact th e video card ma nufacturer for details. How can I set the Powe r Saving function? Windows XP : Set the resolu t[...]

Warnin g Messa g es If there is somet hing wrong w ith the input si gnal, a messa ge appears on the screen or the screen goes blank a lthough the p ower indicat or LED is stil l on. The messag e may indicat e that the mo nitor is out of scan range or that you need to check the sign al cable. Environment The locati on and the pos ition of t he monit[...]

S p ecifications General Model Name SyncMaster 711NT LCD Panel Size 17 inch (43 cm ) Display area 337.92 mm (H) x 270 .336 mm (V) Pixel Pitch 0.264 mm (H) x 0.26 4 mm (V) Synchron ization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75 Hz Display Color 16.7 M Resolution Optimum reso lution 1280 x 1024@ 60 Hz Maximum resolution 1280 x 1024@75 Hz Input Signa[...]

135 MHz Power Cons umption AC 100 - 240 V ~ (+/- 10 %), 50/60 H z Signal Cable 15pin to 15pi n D-sub cabl e, Detachabl e Dimensions (W x H x D) / Weight 370.0 x 342.3 x 69 mm / 14. 6 x 13.5 x 2.7 inch (Without St and) 370.0 x 404.3 x 200 mm / 14.6 x 15.9 x 7 .9 inch (With Basic Stand ), 6.2 Kg / 13.7 (lbs) VESA Mounting Interfac e 100 mm x 100 m m [...]

Photo JPEG,BMP Photo Audio Video MPEG1,WMV MP3, WAV, WM A JPEG, BMP Server Re q uirement Connect Clie nt No CPU RAM Ethernet OS Minimum SPEC Just can load Server Program P3 400 MHz 64 Mbyt e 100 Mbps windows 2 003 Server Recommend SPEC 1 P4 1.0 GHz 256 Mbyte 100 Mbps windows 200 3 Server 2~4 P4 2.4 GHz 512 Mbyte 5~7 P4 3.0 GHz 1 Gbyte 8~10 P4 3.2 G[...]

Preset Timin g Modes Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Cloc k (MHz) Sync Polarity (H/V) IBM, 640 x 35 0 31.469 70. 086 25.175 +/- IBM, 640 x 48 0 31.469 59. 940 25.175 -/- IBM, 720 x 40 0 31.469 70. 087 28.322 -/+ MAC, 640 x 48 0 35.000 66.66 7 30.240 -/- MAC, 832 x 62 4 49.726 74.55 1 57.284 -/- MAC, 1152 x 87[...]

S p ecifications General Model Name SyncMaster 911NT LCD Panel Size 19 inch(48 cm) Display area 376.32 mm(H) x 301.056 mm (V) Pixel Pitch 0.294(H) x 0.2 94(V) Synchron ization Horizontal 30 ~ 81 kHz Vertical 56 ~ 75Hz Display Color 16.7 M Resolution Optimum reso lution 1280x 1024@60 Hz Maximum resolution 128 0x1024@75 Hz Input Signal, Terminated RG[...]

135MHz Power Cons umption AC 100 - 240 V ~ (+/- 10 %), 50/60 H z Signal Cable 15pin-to- 15pin D-su b cable, Deta chable Dimensions (W x H x D) / Weight 416.6 X 375.2 X 74.7 mm / 16.4 x 14.8 x 2.9 inch (Withou t Stand) 416.6 X 420.9 X 200.0 mm / 1 6.4 x 16.6 x 7. 9 inch (With S tand) / 6.8 Kg / 15.0 (lbs) VESA Mounting Interfac e 100 mm x 100 m m (F[...]

Photo JPEG,BMP Photo Audio Video MPEG1,WMV MP3, WAV, WM A JPEG, BMP Server Re q uirement Connect Clie nt No CPU RAM Ethernet OS Minimum SPEC Just can load Server Program P3 400 MHz 64 Mbyt e 100 Mbps windows 2 003 Server Recommend SPEC 1 P4 1.0 GHz 256 Mbyte 100 Mbps windows 200 3 Server 2~4 P4 2.4 GHz 512 Mbyte 5~7 P4 3.0 GHz 1 Gbyte 8~10 P4 3.2 G[...]

screen will be adjusted au tomatically. H owever, if the signal differs, the screen may go blan k while the power LED is on. Refer to the v ideo card m anual and ad just the scre en as follows. Preset Timin g Modes Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Cloc k (MHz) Sync Polarity (H/V) IBM, 640 x 35 0 31.469 70. 086[...]

Contact SAMSUNG WO RLDWIDE If you have any questions or comm ents relati ng to Sa msung products , please cont act the SAMSUNG customer care c enter. North America U.S.A 1-800-SAMSUN G (726-7864) http://www.samsung. com/us CANADA 1-800 -SAMSUNG (726-7864) http://www.samsung. com/ca MEXICO 01-800-SAMSUNG (726-7864) http://www.samsung.com/mx Latin Am[...]

TRINIDAD & TOBAGO 1-800-SAMSUNG (726-786 4) http://www.samsung. com/latin VENEZUELA 0-800-100 -5303 http://www.samsung. com/latin Europe AUSTRIA 0800-SAMSUNG( 726-7864) www.samsung.com/at BELGIUM 02 201 2418 http://www.samsung. com/be CZECH REPUBLI C 844 000 844 http://www.sa msung.com/ cz DENMARK 70 70 19 70 http://www.samsung. com/dk FINLAND [...]

KYRGYZSTAN 00 -800-500-55-500 RUSSIA 8-800-555 -55-55 http://www.samsung. ru UKRAINE 8-800-502 -0000 http://www.samsung. ua UZBEKISTAN 8-800 -120-0-400 http://www.samsun g.uz Asia Pacific AUSTRALIA 1300 362 603 http://www.samsung. com/au CHINA 800-810-5858, 01 0- 6475 18 80 http://www.samsung. com.cn HONG KONG 3698-4698 http://www.samsung. com/hk I[...]

Horizontal Fre q uenc y The time to s can one li ne connecting th e right edge to the left edge of the screen horizontal ly is called the Horizo ntal Cycle. The inverse num ber of the Hori zontal Cyc le is called Ho rizontal Freq uency. Unit : kHz Interlace and Non-Interlace Methods Showing the h orizontal line s of the s creen from the to p to the[...]

Information in this document is s ubject to change without notice. © 2007 Samsun g Electronics Co., Ltd. All ri g hts reserved. Reproduction in any mann er whatsoever with out th e wr itten permissio n of Samsung E lectronics Co., Ltd. is strict ly forbidden. Samsung Elec tronics Co., Lt d. shall not be liable for er rors contained h erein or for [...]

PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n wh en switching from one image to an othe r especially after displaying a statio nary image for a long time. This guide is to demonstrate correct usag e of LC D products in order to protect them from Image retention. Warrant y Warranty does not cover an y dam[...]

Ex) The best way to prote ct your monitor from Image retentio n i s to set your PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is opera ted under normal conditio ns. Normal conditions are defined as continuously changi ng video patterns. Whe n th e LC D panel is ope[...]