Samsung 940MG manual

Install Drivers Install Pro g rams SyncMaster 940MG[...]

Failure t o follow di rections not ed by this symb ol could resu lt in bodily harm or dama ge to the equipment. Prohibited Importan t to read and un derstand at all times Do not disassembl e Disconnect the plug f rom the outl et Do not to uch Groundin g to preven t an electri c shock Power When not used f or extended period o f time, set your compu[...]

Do not pull the plug out by the wire nor touch the plug with wet hands. z This may caus e electric shock or fi re. Use only a properly grounde d plug and receptacle. z An improper ground may cause el ectric shock or equipment dama ge. Insert the power plug firmly so that it does not come loose. z A bad connec tion may cause fire. Do not excessively[...]

locati on with heav y dust, high o r low tempera tures, high humidit y, and exposed to chemical substances a nd where it oper ates for 24 ho urs such as at ai rports, tr ain stations etc. z Failure to do so may cause s erious dama ge to your mon itor. Place your monitor in a location with low humidity and a minimum of dust. z Failure t o do so may [...]

z The monito r could be dama ged or broke n. Do not place the monitor face down. z This may damage th e TFT-LCD surface. The installation of the bracket must be done by a quali fied professional. z Installing the brac ket by unqualifie d personnel may result in inj ury. z Always us e the mounti ng device spec ified in the ow ner's manual. When[...]

z This may caus e damage, electri c shock or fire. Use the recommended detergen t with a smooth cloth. If the connector between the plug and the pi n is dusty or dirt y, clean it properly using a dry cloth. z A dirty connector m ay cause electric sho ck or fire. Make sure to unplug the power co rd before cleaning the product. z Otherwise, this ma y[...]

Keep the product away from places exposed to oil, smoke or moisture; do not install inside a vehic le. z This may caus e a malfunctio n, electric shock or fire. z In particular, avoid operating the mo nitor near water o r outdoors where it could be exposed to snow or rain. If the monitor is dropped or the casing is damaged, t urn the monitor off an[...]

Do not insert metal objects such as c hopsticks, wire and tools or inflammable objects such as paper or matches into the vent, headphone port or AV ports. z It may caus e a fire or an el ectric shock . If an alien su bstances or wa ter flows into the produc t, turn the product off , unplug the pow er connector from the w all outlet and contact the [...]

When not using the product for an exte nded period of time, keep the product unplugged. z Otherwise, this may cause he at emission from the accumulated dirt or degraded i nsulation, ca us ing electr ic shock or fire. Do not place your children's favorite toys or any other objects of interest on the product. z Children m ay try to climb on the [...]

Please make sure the following items are included with your monitor . If any items are missing, contact your dealer . Contact a local deale r to bu y o p tional items. Unpacking Monito r Manual Quick Setup Guide Warranty Card ( Not available in all locations ) User's Guide, Monitor Driver, Natural Color software[...]

Cable D-Sub Cable Audio Cable Power Cord Others Remote Control Batteries ( AAA X 2 ) Connecte r Sold se p aratel y DVI Cable RCA Cable (Video-Yellow, Audio-Red and White ) Component(P R , P B , Y) Cable S- V ideo Cable Ear p hones/Head p hones SCART Cable TV antenna cable[...]

Front 1. SOURCE 2. PIP 3. MENU 4. CH 5. - VOL + 6. [ ] Enter button 7. [ ] Power button 8. Power indicator 9. Remote Control Sensor 10. Speaker 1. SOURCE Press the 'SOURCE' button to change the input sign al source. Changing th e source is al lowed only in ex ternal devices t hat are connect ed to the moni tor at the time. To switch Scree[...]

Rear (The configuration at the back of the monitor may va ry from product to product.) 1. POWER Power terminal Connect the po wer cord for your mon itor to the POWER on the back of the monitor. This product ma y be used with 100 ~ 24 0VAC(+/- 10%). 2. DVI/PC IN DVI/PC IN 1. DVI(HDCP) : Connect the DVI cab le to the DVI(HDCP) p ort on the back of yo[...]

4. COMPONENT IN COMPONENT IN 1. R - AUDIO - L : DVD/DTV soun d input terminal (left/right ) 2. P R , P B ,Y : DVD/DTV video inp ut terminal(P R , P B ,Y) 5. ANT IN ANT IN Connect the CATV ca ble or TV antenna cable to the "ANT IN" port on the rear side of t he monitor. Make sure to use a TV antenna cabl e (sold separately) as t he antenna[...]

See Connecting t he monito r for further info rmation regardin g cable connections. Remote Control The performance of the remote control may be affected by a TV or other electronic device operated near the monitor, causin g malfunction due to interference with fre q uenc y . 1. POWER 2. Number button 3. +100, -/-- 4. - + 5. MUTE 6. TTX/MIX 7. MENU [...]

2. Number button Selects TV ch annels in the TV mode. Used to change channels when PIP is se lected and the PIP Source is set to TV. 3. +100 Press to select channels over 100. For example, to sele ct channel 121, press "+10 0", then press "2" and "1". - / -- ( One/Two-Di g it channel selection ) Use to select a ch anne[...]

17. STILL - O p erates onl y for the CVBS, S- V ideo and RF Si g nal sources. Press the button once to freeze the screen. Pre ss it again to unfreeze . 18. PIP - Available in PC/DVI Mode Push the PIP button t o turn PIP screen On/Off. 19. S.MODE ( Sound Mode ) When you press this butt on, current mode is disp layed on the lower center o f the scree[...]

Connectin g the monitor 1.Connectin g to a Com p ute r 1. Connect the p ower cord for your monitor to the POWER on the back of th e monitor. Plug the power cord for the m onitor into a nearby outlet. 2-1. Using the D-sub (Analog) c onnector on the video card. Connect t he signal cable to th e RGB port on th e back of your mon itor. 2-2. Using the D[...]

1. Using the D-su b (Analog) connector o n the video card. Connect t he signal cable to the D-SUB port on the Macinto sh computer . 2. For older mode l Macintoshes, you need to adjust th e resolution control DIP switch on the Macintosh adapter (optiona l) referring to the sw itch configuration t able shown on its rea r. 3. Turn on th e monitor an d[...]

3. Then, start the DVD, VCR or Camcord ers with a DVD disc or tap e inserted. 4. Select AV or S-Vide o using the SOURCE . 1-2. Connecting EXT.(RGB) - It only app lies to AV DEVICE that supports SCART. Connect to the DVD Devices input if the device has a EXT (RGB) jack. You can watch DV D simply by hooking up the D VD with the monito r as long as th[...]

Is weak signal causing poor reception? Purchase and install a signal am plifier for better reception . In areas where Antenna cable is not supported, first, attach Connecter to TV antenna . 3. Connec ting DVD/DTV Set Top Box Connect to th e DVD/DTVSet Top Box in put if the device has a DVD/DTV connecto r. You can watch Com ponent simply b y hooking[...]

1. Connect yo ur headphon es to the Hea dphone conn ection t erminal. Using the Stand This monitor su pports various types o f VESA-standard bases. You need to eith er fold or remo ve the base in u se in order to i nstall a VESA b ase. 1. Folding the ba se The monitor may b e reclined from -1 to 23 degrees. 2. Attaching a base T h i s m o n i t o r[...]

four screws that cam e with the arm- type base, wall mount h anger or other base . To mount the monitor on a wall, you should purchase the wall mountin g kit that allows you to mount the monito r at least 10cm away from the wall surface. Contact the nearest Samsung Service Cen ter for more information. Samsung Electronics will n ot be responsible f[...]

4. If you can see following message wind ow, then click the "Continue Anyway" button. Then click "OK" button. 5. Monitor driver installation is completed. This moni tor driver is under certif ied MS logo,a nd this inst allation do esn't dama ge your system.The certified driver will be posted on S amsung Monitor Hom epage. h[...]

3. Click " Display " icon an d choose th e " Settings " tab then click " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and se lect " Driver " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Nex t &quo[...]

8. If you can s ee followin g message win dow, then click t he " Continue Anyway " button. Then click " OK " button. This moni tor driver is under certif ied MS logo,a nd this inst allation doe sn't damage your system.Th e certifie d driver will be po sted on Samsung Monitor Homep age. http://www.samsung. com/ 9. Click the [...]

1. Click " Start " , " Setting " , " Control Panel ". 2. Double click the " Displ ay " Icon. 3. Choose the " Settings " tab and then click " Advanced.. ". 4. Choose " Monitor ". 5. Click " Driver " and th en click on " Update Driver.. " then click on the "[...]

One of the re cent problems in using a co mputer is that the color of the images printe d out by a printer or other imag es scanned by a scanner or a digital camera are not the same as those sh own on the monitor. The Natural Colo r S/W is the very solu tion for this problem. It is a color administration system developed by Samsung E lectronic s in[...]

Input Available Source List : PC / DVI : TV : Ext. : AV : S- Video : Component OSD Description Play/Stop Source List Use to select PC or other external input sources connected to the Monitor. Use to select the screen of your choice. - The direct button on the remote control is 'SOURCE' button. PC DVI : HDCP supported TV Ext. It is connect[...]

- Available in PC, DVI modes. PIP : Turn the PIP Screen on or off. ON/ Off - The direct button on the remote control is ' PIP ' button. Source : Select the input source for the PIP. Main Source: PC / DVI PIP Source (Sub): TV / Ext. / AV / S-Video - The direct button on the remote control is ' SOURCE ' button. Size : Changing the[...]

Currently four different modes are available: Entertain, Internet,Text and Custom. Each mode has its own pre-configured brightness value. You can easily select one of four settings by simply pressing the MagicBright™ control button. - The direct button on the remote control is 'M/B' button. Entertain For watching motion pictures such as[...]

: Adjusts the Brightness of the PIP window on the screen. Sharpness : Adjusts the Sharpness of the PIP window on the screen. Colour : Adjusts the Color of the PIP window on the screen. Source List : TV / Ext. / AV / S-Video / Component Available Source List : PC / DVI : TV : Ext. : AV : S- Video : Component OSD Description Play/Stop Mode The monito[...]

Size You can switch the Size. - The direct button on the remote control is 'P.SIZE' button. Auto Wide / Wide / Zoom / 4:3 Zoom is not available in 1080i(or over 720p) of DTV. Sound Available Source List : PC / DVI : TV : Ext. : AV : S- Video : Component OSD Description Play/Stop Mode The monitor has a built-in high fidelity stereo amplifi[...]

right speakers and you can hear the sound even when the sound value is set to 0. Auto Volume Reduces the differences in volume level among broadcasters. On /Off Dolby Virtual Dolby Virtual Sound On/Off (Dolby Virtual simulates the effect of the Dolby Surround sound system, recreating the movie-theatre or concert-hall- quality sound.) On /Off BBE Sw[...]

Manual Store You can scan the frequency ranges available on your television in your area and store all the channels found manually. Programme : Inputting the appropriate program number on the screen. Colour System : Adjust repeatedly until the color is of the best quality. AUTO, PAL, SECAM, NT4.43 Sound System : Adjust repeatedly until the sound is[...]

Area Configuration When you turn the power on of the product for the first time since it released from a factory, menu to select location will appear. Choose the region and country where you use the monitor. This is because broadcasting type varies according to region and country. You can select broadcasting type in OSD menu as well by selecting ME[...]

Self-Test F eature Check Check the followin g items yourself before calling for service . Contact the service center for problems that you ca nnot solve by your self. Self-Test Featur e Check | Not Optimum Mode | Display Adapt er Drive r Maintenanc e and Cleaning | Symptoms & Recommende d Actions 1. Self-Test Feature Check Your monitor provides[...]

supported by the monitor. 3. Display Adapter D river Display adapt er refers to the computer video card driver. If the adapter is not properly set, you cannot a djust resolution, freque ncy or color and you can not instal l the monito r driver. 1. Checking Adapter Driver Click Start Settings Control Panel Display Se ttings Advanced Adapter. If &quo[...]

Installation | Scr een | Audio | Remote Contro l 1. Problems related to Installa tion Problems related to the monitor instal lation and thei r solutions are li sted. Problems Solutions PC Mode It appears the PC does not function normally. z Check if the Displa y Adapter Driver (VGA Drive r) is properly installed. (Refer to Installing Driver ) The m[...]

dark shadows. White color is poor. Power Indicator blinks green. z The monitor is currently saving the changes mad e in settings to the OSD memo ry. Screen is blank and power indicator light is steady green or blinks every 0.5 or 1 seconds z The monitor is using its p ower management syste m. z press a key on the keyb oard The scree n is blank and [...]

How can I set the Powe r Saving functi on? Windows ME/ XP/2000 : S et the functi on at BIOS-SETUP o f the computer or the screen saver. (Refer to W indows/Computer Manu al). How can I clean t he outer case/LCD Panel? Disconnect the power cord and then clean the monitor with a soft cloth, using ei ther a clea ning soluti on or plain w ater. Do not l[...]

General Genera l Model Name SyncMaster 940MG LCD Pa nel Size 19.0 inch di agonal (48 cm ) Display area 480.24 mm(H) x 255 .15 mm(V) Pixel Pitch 0.2835 mm(H) x 0.28 35 mm(V) Type a-si TFT active matrix Synchronization Horizontal 30 ~ 61 kHz Vertical 56 ~ 75 Hz Display Color 16.7 M Colors Resolution Optimum reso lution WXGA+ 1440 x 9 00 @ 60 Hz Maxim[...]

DVI-D to DVI-D conne ctor, Detachable, 2 .0 m (Option) Signal connectors 15pin 3-ro w D-sub connector, 24pin 3-row D VI-D connector Power Consumption Less than 55 W Power Sav ing Less than 2 W Dimensions (WxDxH)/ Weight 466 x 217 x 406 mm / 18.3 x 8.5 x 16.0 inch / 6 .2 kg (With Stan d) 466 X 66 X 37 1 mm /18.3 x 2.6 x 14.6 inch (Without Stan d) VE[...]

Preset Timing Modes If the signal transf erred from the compute r is the same as the f ollowing Preset Timi ng Modes, the sc reen will be adjusted automatically. Howe ver, if the signal di ffers, the screen may go blank whil e the power LED i s on. Refer to the video card manual and a djust the screen as follows. Table 1. Preset Timing Modes Displa[...]

Countries Italy Sweden German y Norway Spain Israel Denmark Portugal Netherlands Austria Singapore Indonesi a Australi a China North Korea Rumania Irelan d England South Afric a Hongkong Argentina Uruguay Paraguay Brazil Broadcasting Systems SECAM SECAM-B SECA M-D SECAM-K 1 SE CAM-L Countries Iran Iraq Saudi arab ia Syria Lebanon Egypt Russia Hunga[...]

Contact SAMSUNG WORLD-WIDE If you have any questions or comments relating to Samsung pr oducts, please contact the SAMSUNG custome r care center. North America CANADA 1-800-SAMSUNG (7267 864) http://www.sa msung.com/ca MEXICO 01-800-SAMSUN G (7267864) http://w ww.samsung.com/mx U.S.A 1-800-SAMSUNG (726 7864) http://www.samsun g.com Latin Am erica A[...]

DENMARK 38 322 887 http://www.samsung. com/dk FINLAND 09 693 79 5 54 http://www.samsung. com/fi FRANCE 08 25 08 65 65 (€ 0,15/min) http://www.samsung. com/fr GERMANY 01805 - 121213 ( € 0,12/Min) http://www.samsung. de HUNGARY 06 40 985 985 http://www.sa msung.com/hu ITALY 199 153 153 http://w ww.samsung.com/it LUXEMBURG 02 261 0 3 710 http://ww[...]

S y nc Si g nal Sync (Synchronized) Signa ls refer to the standard si gnals that are requ ired to display desired col ors on the monitor. The y are divided into Vertical and Horiz ontal Sync Sign als. These signa ls display normal color images b y the set resolution an d frequency. Types of Sync Signals Separate This is a scheme of transmi tting in[...]

S- V ideo Short for "Super Video." S- Video allows up to 800 lines of ho rizontal resolu tion, enabling high-quality video. V HF/UHF VHF indicate s TV channels 2 to 13, and UHF ind icates channels 14 through 69. Channel Fine Tunin g This feature al lows the viewer to fine-tune the TV ch annel to obtain the b est viewing conditions. The Sa[...]

{ Vertical f requency (ref resh rate): 60 Hz 2. TFT LCD pane ls manufacture d by using advanc ed semiconductor t echnology with a pre cision of 1ppm (one m illionth) and abov e is used for th is product. But the pixels of RE D, GREEN, BLUE an d WHITE color see m to be bright sometim es or some of black pixels could b e seen. This is not from bad qu[...]

MÉXICO IMPORTADO POR: SAM SUNG ELECTRONICS MÉXICO. S.A. de C.V. Vía Lopez Po rtillo No. 6, Col. San Fco. Chilpan Tultitlán, E stado de M éxico, C.P. 54 940 Tel: 01-55-574 7-5100 / 01-800 -726-7864 EXPORTADO PO R: Samsung Electronics CO.,LTD . 416, Mae tan -3dong, Yeongton g - gu, Suwon City, Gyeong gi-do Korea[...]

PRODUCT INFORMATION (I mage Retention Free) LCD Monitors and TVs may have image retentio n when switching from one image to an othe r especially after displaying a statio nary image for a long time. This guide is to demonstrate corre ct usag e of LC D products in order to protect them from Image retention. Warrant y Warranty does not cover an y dam[...]

Ex) The best way to prote ct your monitor from Ima ge retention is to set yo ur PC or S y stem to o p erate a Screen Saver p ro g ram when y ou are not usin g it. Image retention may not o ccur when a LCD panel is operate d under normal conditions. Normal conditions are defined as continuously changing vi deo patterns. When the LCD panel is operate[...]

Correct Disposal of This Product (Waste Electrical & E lectronic Equipment) - Europe only (Applicable in the European Union and other European countries with separate collection s ystems) This marki ng shown on t he product or its literature, in dicates that i t should not be disposed w ith other hous ehold wastes at the end of it s working li [...]