Samsung FPT5084 manual

PLASMA DISPLA Y FP-T5084 FP-T6374 Owner ’ s Instructions Register your product at www .samsung.com/global/register Record your Model and Serial number here for future reference. ▪ Model _______________ ▪ Serial No. _______________ BN68-01094P-00Eng.indb 1 2007-04-13 ¿ÀÈÄ 5:30:41[...]

English - 2 Important W arranty Information Regarding T elevision Format V iewing Wide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the s[...]

English - 3 User Instructions Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. T o avoid such image retention, refer to page 26 of this manual to reduce the degree of[...]

English - 4 Symbols Press One-T ouch Button ➢ Note Contents GENERAL INFORMA TION ■ List of Features .............................................................. 5 ■ Accessories .................................................................... 5 ■ Viewing the Control Panel ............................................. 6 ■ Viewing the [...]

English - 5 General Information List of Features • Adjustable picture settings that can be stored in the TV’ s memory . • Automatic timer to turn the TV on and of f. • A special sleep timer . • V -Chip function. • Excellent Digital Interface & Networking : With a built-in HD digital tuner , non-subscription HD broadcasts can be view[...]

English - 6 V iewing the Control Panel Buttons on the Lower-Right Part of the Panel The buttons on the lower-right panel control your TV’ s basic features, including the on-screen menu. T o use the more advanced features, you must use the remote control. 1 SOURCE T oggles between all the available input sources (TV , A V1, A V2, S-Video1, S-Video[...]

English - 7 V iewing the Connection Panel Rear Panel Jacks Use the rear panel jacks to connect A/V components that will be connected continuously , such as VCR or DVD players. For more information on connecting equipment, see pages 9-14. The product color and shape may vary depending on the model. 1 POWER IN Connect the supplied power cord. 2 DIGIT[...]

English - 8 Remote Control Y ou can use the remote control up to a distance of about 23 feet from the TV . When using the remote, always point it directly at the TV . Y ou can also use your remote control to operate your VCR, Cable box, DVD player , or Set-T op Box. 1 POWER T urns the TV on and of f. 2 NUMERIC BUTTONS Press to directly select a cha[...]

English - 9 Connections Connecting VHF and UHF Antennas If your antenna has a set of leads that look like this, see “Antennas with 300 Ω Flat T win Leads” below . If your antenna has one lead that looks like this, see “Antennas with 75 Ω Round Leads”. If you have two antennas, see “Separate VHF and UHF Antennas”. Antennas with 300 ?[...]

English - 10 ANT OUT ANT IN ANT 2 IN (CABLE) ANT 2 IN (CABLE) Connecting Cable TV T o connect to a cable TV system, follow the instructions below . Cable without a Cable Box 1 Plug the incoming cable into the ANT 2 IN(CABLE) terminal on the back of the TV . ➢ Because this TV is cable-ready , you do not need a cable box to view unscrambled cable c[...]

English - 11 S-Video Connection Y our Samsung TV can be connected to the S-Video jack of a VCR. (This connection delivers a better picture when compared to the regular Video connection above.) Connecting a VCR Video Connection These instructions assume that you have already connected your TV to an antenna or a cable TV system (according to the inst[...]

English - 12 Connecting a Camcorder The side panel jacks on your TV make it easy to connect a camcorder to your TV . They allow you to view the camcorder tapes without using a VCR 1 Connect a Video Cable (or S-Video Cable) between the A V IN 2 [VIDEO] (or S-VIDEO) jack on the TV and the VIDEO OUT jack on the Camcorder . 2 Connect Audio Cables betwe[...]

English - 13 Connecting a DVD Player/Cable Box/Satellite receiver (Set-T op Box) via DVI This connection can only be made if there is a DVI Output jack on the external device. 1 Connect a HDMI/DVI Cable or DVI-HDMI Adapter between the [HDMI IN 1] jack on the TV and the DVI jack on the DVD Player/Cable Box/Satellite receiver (Set- T op Box). 2 Conne[...]

English - 14 Connecting an Amplifier/DVD Home Theater 1 Connect Audio Cables between the AUDIO OUT [R-AUDIO-L] jacks on the TV and AUDIO IN [L-AUDIO-R] jacks on the Amplifier/DVD Home Theater . When an audio amplifier is connected to the “AUDIO OUT [R-AUDIO-L]” jacks: Decrease the gain (volume) of the TV , and adjust the volume level with the A[...]

English - 15 Operation T urning the TV On and Off Press the POWER button on the remote control. Y ou can also use the POWER button on the TV . ➢ It may take a while when your TV starts. Plug & Play Feature When the TV is initially powered On, basic settings proceed automatically and subsequently: 1 Press the POWER button on the remote control[...]

English - 16 5 The TV will begin memorizing all of the available channels. After all the available channels are stored, the Auto program menu reappears. Press the ENTER button when channel memorization is complete. The Clock Mode menu is automatically displayed. ➢ T o stop the search before it has finished, press the ENTER button with Stop select[...]

English - 17 If you want to reset this feature... 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ENTER button to select Plug & Play . For further details on setting up options, refer to the page 15~16. ➢ The Plug & Play feature is only available in the TV[...]

English - 18 Adjusting the V olume Using the V olume Buttons 1 Press the VOL + or VOL – button to increase or decrease the volume. Using the Mute Button At any time, you can cut off the sound using the MUTE button. 1 Press MUTE and the sound cuts off. The word “Mute” will appear in the lower-left corner of the screen. 2 T o turn mute off, pre[...]

English - 19 Memorizing the Channels Y our TV can memorize and store all of the available channels for both air and cable channels. After the available channels are memorized, use the CH or CH button to scan through the channels. This eliminates the need to change channels by entering the channel digits. There are three steps for memorizing channel[...]

English - 20 Setting Up the Remote to Operate Y our VCR 1 T urn of f your VCR. 2 Press the VCR button on your TV’s remote control. 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the VCR code listed on page 22 of this manual for your brand of VCR. Make sure you enter t[...]

English - 21 Setting Up the Remote to Operate Y our DVD 1 T urn of f your DVD. 2 Press the DVD button on your TV’s remote control. 3 Press the SET button on your TV’s remote control. 4 Using the number buttons on your remote control, enter three digits of the DVD code listed on page 24 of this manual for your brand of DVD. Make sure you enter t[...]

English - 22 Remote Control Codes VCR Continued... Brand SAMSUNG ADMIRAL AIW A AKAI AUDIO DYNAMICS BELL&HOWELL BROKSONIC CANDLE CANON CITIZEN COLORTYME CRAIG CURTIS MA THES DAEWOO DB DIMENSIA DYNA TECH ELECTROHOME EMERSON FISHER FUNAI GENERAL ELECTRIC GO VIDEO LG(Goldstar) HARMAN KARDON HIT ACHI INST ANT REPLA Y JC PENNEY JCL KENWOOD KLH LIOYD [...]

English - 23 CABLE BOX Brand SAMSUNG GI HAMLIN HIT ACHI JERROLD MACOM MAGNA VOX OAK P ANASONIC PHILIPS PIONEER RCA REGAL Code 000 001 002 003 004 005 006 007 041 003 024 031 025 030 038 039 025 030 019 023 028 026 003 022 027 037 044 019 021 023 028 004 018 020 044 014 022 040 003 Brand REGENCY SA SCIENTIFIC A TLAN SPRUCER ST ARGA TE 2000 SYL V ANI[...]

English - 24 SAMSUNG DVD Product DVD DVDR BD Record VCR COMBO VCR Record DHR COMBO Code 000 001 002 003 004 005 006 007 008 009 010 01 1 012 013 Product Home Theater VCR COMBO HDD Record COMBO TWIN TRA Y COMBO STB DVD COMBO DVD Receiver A V Receiver Code 014 015 016 017 018 019 020 021 Brand ANAM AUDIOVOX AUDIOLOGIC ANABA APEX DIGIT AL AIW A BROKSO[...]

English - 25 T o Select the Source Use to select TV or other external input sources such as DVD players or Cable Box/Satellite receivers (Set-T op Box) connected to the TV . Use to select the input source of your choice. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Input , then press the ENTER button. 2 Press t[...]

English - 26 Picture Control Using Automatic Picture Settings Y our new Plasma TV gives you optimal control over the picture you’re watching. Y ou can change the screen size, improve the image quality , even watch something else without turning off what you’re currently watching. Please be aware that the best picture on this TV will be obtained[...]

English - 27 5 Press the ▲ or ▼ button to select Color T one , then press the ENTER button. 6 Press the ▲ or ▼ button to select Cool2 , Cool1 , Normal , W arm1 , or W arm2 , then press the ENTER button. ➢ When the picture mode is set to Dynamic or Standard , W arm1 and W arm2 cannot be selected. Resetting the Picture Settings to the Facto[...]

English - 28 Changing the Screen Size Occasionally , you may want to change the size of the image on your screen. Y our TV comes with six screen size options, each designed to work best with specific types of video input. Y our cable box or satellite receiver may have its own set of screen sizes as well. In general you should view the TV in 16:9 mo[...]

English - 29 Making Detailed Picture Settings Samsung’ s new TVs allow you to make even more precise picture settings than previous models. See below to make Detailed picture settings. 1 Press the MENU button to display the menu. Press the ENTER button to select Picture . 2 Press the ▲ or ▼ button to select Detailed Settings , then press the [...]

English - 30 Active Color If you turn on this option, the blue and green colors will be more vivid. 1 Press the MENU button to display the menu. Press the ENTER button to select Picture . 2 Press the ▲ or ▼ button to select Active Color , then press the ENTER button. 3 Press the ▲ or ▼ button to select Off or On , then press the ENTER butto[...]

English - 31 Selecting the Film Mode Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality . 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ▲ or ▼ button to select Film Mode , then press the ENTER button. 3[...]

English - 32 V iewing Picture-in-Picture This product has one built-in tuner , which does not allow PIP to function in the same mode. For example, you cannot watch one TV channel in the main screen, and a different one in the PIP screen. Please see ‘PIP Settings’ below for details. Y ou can use the PIP feature to simultaneously watch two video [...]

English - 33 Changing the Position of the PIP W indow 4 Press the ▲ or ▼ button to select Position , then press the ENTER button. Press the ▲ or ▼ button to select the desired PIP window position, then press the ENTER button. ➢ In Double Window ( ) and Double Wide ( ) modes, Position cannot be selected. ➢ If the PIP window is set to Dou[...]

English - 34 Sound Control Using Automatic Sound Settings Y our TV has automatic sound settings (“Standard”, “Music”, “Movie”, “Speech”, and “Custom”) that are preset at the factory . Or you can select “Custom”, which automatically recalls your personalized sound settings. 1 Press the MENU button to display the menu. Press t[...]

English - 35 Setting the T ruSurround XT T ruSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. T ruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all mu[...]

English - 36 Multi-T rack Sound 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button. 2 Press the ▲ or ▼ button to select Multi-T rack Options , then press the ENTER button. 3 Press the ENTER button to select Multi-T rack Sound . Press the ▲ or ▼ button to select a setting yo[...]

English - 37 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Sound , then press the ENTER button. 2 Press the ▲ or ▼ button to select Sound Select , then press the ENTER button. 3 Press the ▲ or ▼ button to select Sub , then press the ENTER button. Press the EXIT button to exit. • Main : Used to listen t[...]

English - 38 Channel Control Selecting the Antenna 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel , then press the ENTER button. 2 Press the ENTER button to select Antenna . Press the ▲ or ▼ button to select Air or Cable , then press the ENTER button. Press the EXIT button to exit. Press the ANTENNA b[...]

English - 39 5 Press the ▲/▼/◄/► buttons to select a channel to delete, then press the ENTER button. Press the ▲ or ▼ button to select Delete , then press the ENTER button to delete the channel. Press the EXIT button to exit. • P .MODE (RED) button : Press repeatedly to select All , Added , or Favorite . • S.MODE (GREEN) button : Pr[...]

English - 40 V iewing the Channel Lists Y ou can display a list of all channels, added channels or your favorite channels. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel , then press the ENTER button. 2 Press the ▲ or ▼ button to select Channel List , then press the ENTER button. 3 Press the ▲ or ?[...]

English - 41 Labeling Channels Channels can labeled so that their call letters appear whenever the channel is selected. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Channel , then press the ENTER button. Press the ▲ or ▼ button to select Name , then press the ENTER button. 2 Press the ▲ or ▼ button to s[...]

English - 42 Checking the Digital-Signal Strength Unlike analog channels, which can vary in reception quality from “snowy” to clear , digital (HDTV) channels have either perfect reception quality or you will not receive them at all. So, unlike analog channels, you cannot fine tune a digital channel. Y ou can, however , adjust your antenna to im[...]

English - 43 PC Display Using Y our TV as a Computer (PC) Display Setting Up Y our PC Software (Based on Windows XP) The Windows display-settings for a typical computer are shown below . The actual screens on your PC will probably be different, depending upon your particular version of Windows and your particular video card. However , even if your [...]

English - 44 Setting up the TV with your PC Use the Auto Adjust function to have the TV set automatically adjust the video signals it receives from the PC. The function also automatically fine-tunes the settings and adjusts the frequency values and positions. How to Auto Adjust 1 Press the MENU button to display the menu. Press the ▲ or ▼ butto[...]

English - 45 Changing the Screen Position Y ou can adjust the position of the screen after connecting the TV to your PC. ➢ Change to the PC mode first. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select PC , then press the ENTER button. 2 Pr[...]

English - 46 T ime Setting Setting the T ime Setting the clock is necessary in order to use the various timer features of the TV . Also, you can check the time while watching the TV . (Just press the INFO button.) Option 1: Setting the Clock Manually 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then pre[...]

English - 47 Option 2: Setting the Clock Automatically The Clock can be set automatically if you are receiving a digital signal. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Time , then press the ENTER button. 2 Press the ENTER button to[...]

English - 48 Setting the On/Off Timer Use this feature to set the TV to turn on or off at a desired time. Y ou must set the clock first. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Time , then press the ENTER button. 2 Press the ▲ or [...]

English - 49 Function Description Selecting a Menu Language 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. Press the ▲ or ▼ button to select Language , then press the ENTER button. 2 Press the ▲ or ▼ button to select the appropriate language: English , Español , or Fr[...]

English - 50 V iewing Closed Captions (On-Screen T ext Messages) - Digital The Digital Captions function operates on digital channels. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ▲ or ▼ button to select Caption , then press the ENTER button. 3 Press the ENTE[...]

English - 51 V iewing Closed Captions (On-Screen T ext Messages) - Analog The Analog Caption function operates in either analog TV channel mode or external signal mode. (Depending on the broadcasting signal, the Analog Caption function may operate on digital channels.) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to sele[...]

English - 52 Menu T ransparency Level Adjusts the transparency of the menu screen. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ▲ or ▼ button to select Menu T ransparency , then press the ENTER button. 3 Press the ▲ or ▼ button to select level, then press[...]

English - 53 Using the Energy Saving Feature This feature adjusts the power consumption of the unit in order to save energy . 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ▲ or ▼ button to select Energy Saving , then press the ENTER button. Press the ▲ or ?[...]

English - 54 Setting the Function Help Displays help on the menu functions. 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ▲ or ▼ button to select Function Help , then press the ENTER button. 3 Press the ▲ or ▼ button to select Off or On , then press the EN[...]

English - 55 Using the V -Chip The V -Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V -Chip restrictions are set up or changed. ➢ When the V -Chip feature is activated, the PIP features do not function. ➢ V -Chip function is not availabl[...]

English - 56 How to Set up Restrictions Using “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating. 1 Press the MENU button to display the menu. Press the ▲ or ▼ but[...]

English - 57 6 How to set the FV , D, L, S and V sub-ratings. First, select one of these TV - Ratings: TV -Y , TV -Y7, TV -G, TV -PG, TV -14, or TV -MA (See Step 4 ), and press the ENTER button. The “ ” symbol will be displayed for each sub-rating. While “ ” is selected, press the ► button to go to a sub rating. Press the ENTER to block t[...]

English - 58 How to Set up Restrictions Using “Canadian English” (for Canada Models) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ▲ or ▼ button to select V -Chip , then press the ENTER button. The message Enter PIN will appear . Enter your 4 digit PIN num[...]

English - 59 How to Set up Restrictions Using “Canadian French” (for Canada Models) 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ▲ or ▼ button to select V -Chip , then press the ENTER button. The message Enter PIN will appear . Enter your 4 digit PIN numb[...]

English - 60 How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: 1 Enter your PIN. T o resume normal viewing, tune to a different channel using CH or CH button. Under certain conditions ([...]

English - 61 Upgrading the Software Samsung may offer upgrades for your TV’ s firmware in the future. Please contact the Samsung call center at 1-800-SAMSUNG to receive information about downloading upgrades and using a USB drive. Upgrades will be possible by connecting a USB drive to the USB port located on the side of your TV . 1 Insert a USB d[...]

English - 62 WISELINK Using the WISELINK Function This function enables you to view and listen to photo (BASELINE, JPEG) and audio files (MP3) saved on a USB Mass Storage Class device. ➢ WISELINK only supports USB Mass Storage Class devices (MSC). MSC is a Mass Storage Class Bulk-Only T ransport device. Examples of MSC are Thumb drives and Flash [...]

English - 63 Using the WISELINK Mode 1 Press the MENU button to display the menu. Press the ENTER button to select Input . Press the ▲ or ▼ button to select WISELINK , then press the ENTER button. 2 Press the ▲ or ▼ button to select a corresponding memory device, then press the ENTER button. A menu for selecting the Photo or Music files or [...]

English - 64 Using the Photo (JPEG) List Y ou can play back the JPEG files saved on a memory device in various ways. 1 After switching the mode to WISELINK, select the memory device that you have inserted. (Refer to page 63) 2 Press the ◄ or ► button to select Photo , then press the ENTER button. JPEG files and existing folders are displayed. 3[...]

English - 65 Using the Options Menu Slide Show: Starts a slide show . (Refer to Viewing a Slide Show on page 66) Rotate: Y ou can rotate images in full screen mode. Images are rotated in the order of 90°, 180°, 270° and 0° (original state). (Refer to Rotating on page 68) ➢ Y ou cannot save a rotated image. ➢ It may take long time to rotate [...]

English - 66 Viewing a Slide Show 1 After switching the mode to WISELINK, select the memory device that you have inserted. (Refer to page 63) 2 Press the ◄ or ► button to select Photo , then press the ENTER button. JPEG files and existing folders are displayed. 3 Press the INFO button to display the option ( Slide Show , Cancel the selected fil[...]

English - 67 Using the Menu during a Slide Show Slide Show Speed: Select to control the Slide Show Speed. Each time the ENTER button is pressed, the speed changes repeatedly . ( Normal → Slow → Fast ) Background Music: Select to choose whether you want to play MP3 files during a slide show . Each time the ENTER button is pressed, the background[...]

English - 68 Rotating 1 After switching the mode to WISELINK, select the memory device that you have inserted. (Refer to page 63) 2 Press the ◄ or ► button to select Photo , then press the ENTER button. JPEG files and existing folders are displayed. 3 Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button. Pressing the [...]

English - 69 Zooming-In 1 After switching the mode to WISELINK, select the memory device that you have inserted. (Refer to page 63) 2 Press the ◄ or ► button to select Photo , then press the ENTER button. JPEG files and existing folders are displayed. 3 Press the ▲/▼/◄/► buttons to select a file, then press the ENTER button. Pressing th[...]

English - 70 Using the Music (MP3) List Y ou can play back the MP3 files saved on a memory device in various ways. 1 After switching the mode to WISELINK, select the memory device that you have inserted. (Refer to page 63) 2 Press the ◄ or ► button to select Music , then press the ENTER button. MP3 files and existing folders are displayed. 3 Pr[...]

English - 71 Using the Setup Menu Setup displays the user settings of the WISELINK menu 1 After switching the mode to WISELINK, select the memory device that you have inserted. (Refer to page 63) 2 Press the ◄ or ► button to select Setup , then press the ENTER button. The Setup menu is displayed. 3 Press the ▲ or ▼ button to select an item [...]

English - 72 Connecting Anynet + Devices The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. T o be sure your Samsung device has this feature, check if there is an Anynet+ logo on it. T o connect to a TV Connect the [HDMI 1], [HDMI 2] or [HDMI 3] jack on the TV and the HDMI OUT jack of the corresponding Anynet + [...]

English - 73 Setting Up Anynet + The following settings help set the Anynet + functions. T o use the Anynet+ Function, Anynet+ (HDMI-CEC) must be set to On 1 Press the Anynet + button. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ENTER button to select Anynet+ (HDMI-CEC) , then press the ENTER button. 3 Pre[...]

English - 74 Anynet + Menu The Anynet + menu changes depending on the type and status of the Anynet + devices connected to the TV . Anynet + Menu Description View TV Switches from Anynet + to TV broadcast mode. Record Starts a recording. (This menu works only for a device supporting recording.) (Device_Name) Menu Shows the menu of the connected dev[...]

English - 75 Listening through a Receiver (Home theater) Y ou can listen to sound through a receiver instead of the TV speaker . 1 Press the Anynet + button. Press the ▲ or ▼ button to select Receiver , then press the ENTER button. 2 Press the ◄ or ► button to select to On , then press the ENTER button. Now you can listen to sound through t[...]

English - 76 A ppendix Problem Possible Solution Poor picture quality . T ry another channel. Adjust the antenna. Check all wire connections. Poor sound quality . T ry another channel. Adjust the antenna. No picture or sound. T ry another channel. Press the SOURCE button. Make sure the TV is plugged in. Check the antenna connections. Make sure the [...]

English - 77 Auto W all-mount adjustment (Sold separately) Once the auto wall mount is installed, the position of your TV can be easily adjusted. Entering the menu 1 Press the MENU button to display the menu. Press the ▲ or ▼ button to select Setup , then press the ENTER button. 2 Press the ▲ or ▼ button to select W all-Mount Adjustment , t[...]

English - 78 W all Mount Kit Specifications ( VESA ) Install your wall mount on a solid wall perpendicular to the floor . When attaching to other building materials, please contact your nearest dealer . If installed on a ceiling or slanted wall, it may fall and result in severe personal injury . Product Family inch VESA Spec. (A * B) Standard Screw[...]

English - 79 How to assemble the Stand-Base (depending on the model) W arning Firmly secure the stand to the TV before moving it, as the stand may fall and could cause serious injury . ➢ T wo or more people should carry the TV . Never lay the TV on the floor because of possible damage to the screen. Always store the TV upright. Model Name FP-T508[...]

English - 80 Dimensions (FP-T5084) SIDE VIEW REAR VIEW TOP VIEW FRONT VIEW JACK P ANEL DET AIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM 44.4 50.8 43.6 24.5 29.1 31.7 24.4 3.7 2.0 12.6 4.6 23.6 15.7 BN68-01094P-00Eng.indb 80 2007-04-13 ¿ÀÈÄ 5:33:48[...]

English - 81 Dimensions (FP-T6374) SIDE VIEW TOP VIEW FRONT VIEW JACK P ANEL DET AIL 2 1/4"H x 18 3/4"W @ 5 3/4" UP FROM BOTTOM REAR VIEW 60.2 3.4 55.6 54.8 35.6 18.4 30.8 31.6 18.1 39.4 42.8 1.5 9.4 7.2 16.6 16.8 26.6 16.8 6.3 16.0 7.6 BN68-01094P-00Eng.indb 81 2007-04-13 ¿ÀÈÄ 5:34:08[...]

T h i s p a g e i s i n t e n t i o n a l l y l e f t b l a n k . T h i s p a g e i s i n t e n t i o n a l l y l e f t b l a n k . BN68-01094P-00Eng.indb 82 2007-04-13 ¿ÀÈÄ 5:34:24[...]

T h i s p a g e i s i n t e n t i o n a l l y l e f t b l a n k . T h i s p a g e i s i n t e n t i o n a l l y l e f t b l a n k . BN68-01094P-00Eng.indb 83 2007-04-13 ¿ÀÈÄ 5:34:24[...]