Samsung ME65B manual

BN46-00098M-01 User Manual ME65B ME75B This product is designed to be used in South Korea only, and the quality cannot be guaranteed in other countries. (FOR KOREA UNIT STANDARD ONLY) The color and shape of parts may differ from what is shown. Specifications are su bject to change without notice to improve quality.[...]

Table Of Cont ents 2 Table Of Contents BEFORE USING THE PRODUCT 11 Copyright 12 Cleaning 12 Storage 13 Safety Precautions 13 Symbols 14 Electricity and Safety 15 Installation 17 Operation PREPARATIONS 22 Checking the Contents 22 Removing the Packaging 23 Checking the Components 25 Parts 25 Control Panel 27 External sensor KIT (ME65B model only) 29 [...]

Table Of Contents Table Of Cont ents 3 CONNECTING AND USING A SOURCE DEVICE 55 Before Connecting 55 Pre-connection Checkpoints 56 Connecting and Using a PC 56 Connecting to a PC 59 Changing the Resolution 61 Connecting an External Monitor 62 Connecting to a Video Device 62 Connection Using the AV Cable 62 Connection Using the Component Cable 63 Con[...]

Table Of Contents Table Of Cont ents 4 73 What is MDC? 73 Connecting to MDC 75 Connection Manag ement 76 Auto Set ID 77 Cloning 78 Command Retry 79 Getting Started with MDC 81 Main Screen Layout 82 Menus 84 Screen Adjustment 87 Sound Adjustment 88 System Setup 97 Tool Settings 99 Other Functions 104 Troubleshooting Guide SCREEN ADJUSTMENT 106 Pictu[...]

Table Of Contents Table Of Cont ents 5 115 Advanced Settings 115 Black Tone 115 Dynamic Contrast 115 Shadow Detail 116 Gamma 116 Expert Pattern 116 RGB Only Mode 116 Color Space 116 White Balance 117 10p White Balance ( Off / On ) 117 Flesh Tone 117 Edge Enhancement ( Off / On ) 117 Motion Lighting ( Off / On ) 117 LED Motion Plus ( Off / On ) 118 [...]

Table Of Contents Table Of Cont ents 6 126 Channel 126 Channel Manager 128 Antenna 128 Auto Program 128 Fine Tune 129 MagicInfo Lite 129 Videos 129 Playing a Video 133 Photos 133 Viewing a Photo (or Slide Show ) 134 Music 134 Playing Music 136 Videos / Photos / Music - Additional Functions 136 Sorting the file lists 137 Videos / Photos / Music Play[...]

Table Of Contents Table Of Cont ents 7 SYSTEM 152 Plug & Play 153 Multi Control 153 Configuring settings for Multi C ontrol 154 Time 154 Clock 154 Sleep Timer 155 On Timer 156 Off Timer 156 Holiday Management 157 Menu Language 157 Eco Solution 157 Energy Saving 158 Eco Sensor ( Off / On ) 158 No Signal Power Off 158 Auto Power Off ( Off / On ) [...]

Table Of Contents Table Of Cont ents 8 166 Video Wall 166 Video Wall 167 Format 167 Horizontal 167 Vertical 168 Screen Position 169 Source AutoSwitch Settings 170 General 170 Max. Power Saving 170 Game Mode 171 BD Wise 171 Auto Power 171 Standby Control 171 Lamp Schedule 171 OSD Display 172 Power On Adjustment 172 Temperature Control 172 Device Nam[...]

Table Of Contents Table Of Cont ents 9 MAGICINFO LITE 180 File Formats Compat ible with MagicInfo Lite Player 180 Video / Audio 184 Network Schedule 184 Connecting to a server 185 MagicInfo Lite Settings 185 Approving a connected device from the server 188 Setting the current time 189 Local Schedule 189 Local Schedule Manager 189 Registering a Loca[...]

Table Of Contents Table Of Cont ents 10 207 Q & A SPECIFICATIONS 209 General 210 PowerSaver 211 Preset Timing Modes 213 License APPENDIX 214 Contact SA MSUNG WORLD WIDE 215 Responsibility for the Pay Service (Cost to Customers) 215 Not a product defect 215 A Product damage caused by customer's fault 215 Others 216 Optimum Picture Qu ality [...]

11 Before Using the Product Before Using the Product Copyright The content s of this manua l are subjec t to change without noti ce to improve quality. © 2012 Samsung Electronics Samsung Electro nics owns th e copyrigh t for this m anual. Use or reproduction of this manual in part s or entirety withou t the authorizati on of Samsung Electr onics i[...]

12 Before Using the Product Before Using the Product Cleaning Exercise care when cleaning as the panel and ex terior of advan ced LCDs are easily s cratched. Take the following steps when c leaning. The following images are for reference only. Real-life situations may differ from what is shown in the images. Storage High-glossy models can develo p [...]

13 Before Using the Product Before Using the Product Safety Precautions Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTR IC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicat es that high vo ltage is present ins id[...]

14 Before Using the Product Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damaged p ower cord or plug, or a loose po wer socket . z An electric shock or fire may re sult. Do not use m ultiple pro ducts with a sing le[...]

15 Before Using the Product Before Using the Product Caution Installation Warning Do not disconnect the power cord while the product is bein g used. z The product may become damaged by an electric shock. Only use the p ower cord provid ed with your product by Sa msung. Do not use the power cord with other pro ducts. z A fire or electric shoc k may [...]

16 Before Using the Product Before Using the Product Keep the plastic packa ging out of the reac h of children. z Children may suffoca te. Do not install t he product on an unstab le or vibratin g surface (in secure shelf , sloped surfa ce, etc.) z The product may fall and become dam aged and/or cause an injury. z Using the produ ct in an area w it[...]

17 Before Using the Product Before Using the Product Caution Operation Warning Do not drop the product while mo ving. z Product failure o r person al injury may result. Do not set down the product on it s front. z The screen may beco me damaged. When installing the pr oduct on a cabi net or shelf, make su re that the bottom edge of th e front of th[...]

18 Before Using the Product Before Using the Product If the product ge nerates abnorma l sounds, a burning sm ell or smoke, disconnect the power co rd immediate ly and contact Sa msung Customer Service Center . z An electric shock or fire may re sult. Do not let childre n hang from the pr oduct or climb on to p of it. z Children may become injur ed[...]

19 Before Using the Product Before Using the Product Caution Ensure the vents are not bl ocked by tabl ecloths or cur tains. z An increased inter nal temperat ure may cause a fire. Do not insert m etallic objects (cho psticks, coins, hairp ins, etc) or o bjects that burn easily (paper, mat ches, etc) into the produc t (via the vent or input/ output[...]

20 Before Using the Product Before Using the Product Looking at the screen too close for an extended period of tim e can deter iorate your eyes ight. Do not use humidifi ers or stoves arou nd the produc t. z A fire or electric shoc k may result. Rest your eye s for more t han 5 minu tes for every 1 hour of pr oduct use. z Eye fatigue will be relie [...]

21 Before Using the Product Before Using the Product When replacing the battery, inser t it with the right polarity (+, -). z Otherwis e, the batter y may becom e damaged or it may cau se fire, per sonal injury or damage due to leak age of th e internal liquid. The batteries (and rechargeab le batteries) are no t ordinary refuse and must be returne[...]

22 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging This image is for reference only. 1 Open the packaging b ox. Be careful not to d amage the product when you open the p ackaging with a sharp instrum ent. 2 Remove the blac k locking device at the bottom of the box. 3 Using the grooves in the bo x, lift and remov[...]

23 Preparations 1 1 Preparations 1.1.2 Checking the Components z Contact the vendor where you purchased the product if any components are missing. z The appearance of the components and items sold separately may differ from the image shown. z A stand is not provided with the product. To install a stand, you can purchase one separately. Components C[...]

24 Preparations 1 1 Preparations The RS232C adapter can be used to connect to another monito r using the D-SUB (9-pin) type RS232C cable. Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product. Items sold separately z The stand is not supplied. z The following items can be purchased at your nearest retailer. Wal[...]

25 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Control Pa nel Panel Key The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Location Description Power on the p roduct. If you press the [ ] button wh en the prod uct is turned o n, the cont rol menu will be displaye d. [...]

26 Preparations 1 1 Preparations Control menu If you press the [ ] button on the panel key ("1.2.1 Control Panel") when the product is turned on, the control menu will be displayed. Location Description Select the conn ected in put source. Move the panel key right to select Source [ ] in the contr ol menu. When the list of inpu t sources [...]

27 Preparations 1 1 Preparations 1.2.2 External sensor KI T (ME65B model only) z The External sensor KIT has a remote-control sensor, a brightness sensor and function keys. If mounting the display onto a wall, you can move the External sensor KIT to the side of the display. z The color and shape of parts may differ from what is shown. Specification[...]

28 Preparations 1 1 Preparations Attaching the External sensor KIT to the side (ME65B model only) z This External sensor KIT can be attached to any part of the display using the double-sided tape provided with the sensor. z The External sensor KIT can also be attached to a wall near the display. z Do not attach the External sensor KIT to the displa[...]

29 Preparations 1 1 Preparations 1.2.3 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n [IR / AMBIENT SENSOR IN] Supplies power t o the externa l sensor board or receives the light sensor signal [IR OUT] Receives the inpu t signal via t[...]

30 Preparations 1 1 Preparations Assembling the Holder-Wire stand (ME65B model only) z Stand: Sold se parately[...]

31 Preparations 1 1 Preparations 1.2.4 Remote Control z Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. z Remote control button functions may differ for different products. Power off the product. Not available. Return to the previous menu. Change[...]

32 Preparations 1 1 Preparations Adjusting the OSD with the Remote Control To place batteries in the remote control 1. Open the OS D menu. 2. Select from Picture , Sound , Media , Network , System or Support in the displayed OSD menu scre en. 3. Chang e settings as desired. 4. Finish setting. 5. Close the onscree n display (OSD) menu. 1 3 2[...]

33 Preparations 1 1 Preparations Remote Control Reception Range Use the remo te control with in 7m to 10m from the sen sor on the product at an angle of 3 0˚ from the left and right. z Store used batteries out of reach of children and recycle. z Do not use a new and used battery together . Replace both batteries at the same time. z Remove batterie[...]

34 Preparations 1 1 Preparations 1.2.5 Controlling more than one display product using an External sensor KIT z Connect the [ IR OUT] port on the pro duct to the [ IR / AMBIENT SENSOR IN] port o n the other display product using the stereo cab le. z A command sen t from the remot e control point ed at produ ct (to which th e External se nsor KIT is[...]

35 Preparations 1 1 Preparations 1.3 Before Installing the Product (Installation Guide) 1.3.1 Tilting Angl e and Rotation Contact Samsung Customer Service Center for further details. A The product can be tilte d at a maxim um angle of 15 from a pe rpendicular w all surface. B To use the produc t vertically (portrait), tur n it clockwise so that the[...]

36 Preparations 1 1 Preparations 2. Installation on an I ndented Wall Contact Samsung Customer Service Center for further details. When installing the product on an indented wall, al low at least the space specified above between the product and wall for ventilation and ensure th at the ambient temperature is kept below 35 C. Figure 1.2 Side view F[...]

37 Preparations 1 1 Preparations 1.4 Dimensions (Unit: mm) All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your prod uct. Not responsible for typographical or printed errors. 1 2 3 4 5 Model name ME65B 1480 . 51 4 2 8 . 58 0 3 . 5 855 [...]

38 Preparations 1 1 Preparations 1.5 Installing the Wall Mount 1.5.1 Preparing before installing Wall-Mount 1.5.2 Installing the Wall Mount Kit The wall mount kit (sold separately) allow s you to mount the product on the wall. For detailed informatio n on installing the wall moun t, see the instructions prov ided with the wall mount. We recommend y[...]

39 Preparations 1 1 Preparations (Unit: mm) Do not install your Wall Mount Kit wh ile your product is turned on. It may result in personal injury due to electric shock. z Standard dimensions for wall mount kits are shown in the table below. z Samsung wall mount kits contain a detailed installation manual and all parts necessary for assembly are pro[...]

40 Preparations 1 1 Preparations 1.6 Remote Control 1.6.1 Cable Connection RS232C Cable z Pin assignment Interface RS232C (9 pins) Pin TxD (No. 2), Rx D (No. 3), GND (N o. 5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15m (only shielded type) Pin Signal 1 Detect d ata carri er 2 Received data 3 Tra[...]

41 Preparations 1 1 Preparations z RS232C cable Connector: 9-Pin D-Sub to Stereo Cable LAN Cable z Pin assignment -P1- -P1- -P2- -P2- Female Rx Tx Gnd 2 3 5 --------> <-------- --------- 3 2 5 Tx Rx Gnd STEREO PLUG (3.5ø) Pin No Stand ard C olor Signal 1 W hite and oran ge TX+ 2 Orange TX- 3 Wh ite and green RX+ 4 Blue NC 5 White and blue NC[...]

42 Preparations 1 1 Preparations z Connector: RJ45 Direct LAN cable (PC to HUB) Cross LAN cable (PC to PC) Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ TX- 2 <---- ----> 2 TX- RX+ 3 <--------> 3 RX+ RX- 6 <--------> 6 RX- Signal P1 P 2 Signal TX+ 1 <------- -> 3 R X + TX- 2 <--------> 6 RX- RX+ 3 <--------> 1[...]

43 Preparations 1 1 Preparations 1.6.2 Connection z Connection 1 z Connection 2 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT RJ45 RJ45[...]

44 Preparations 1 1 Preparations z Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

45 Preparations 1 1 Preparations 1.6.3 Control Codes Viewing control state (Get control command) Controlling (Set control command) Command z Issued IDs can be displayed in hexadecimals. However, ID 0 must be displayed as 0xFF. z All communications take place in hexadecimals . The checksum is calc ulated by adding up all values except the he ader. I[...]

46 Preparations 1 1 Preparations z To control all de vices connected by a serial cable simultaneously irresp ective of IDs, set th e ID as "0xFE" and transm it commands. Co mmands will be executed by eac h device but ACK w ill not respond. Power control z Function A TV/monitor can be pow ered on and o ff using a PC. z Viewing power state [...]

47 Preparations 1 1 Preparations Volume control z Function The volume o f a TV/monit or can be a djusted using a PC. z Viewing volume sta te (Get Volume Stat us) z Setting the vo lume (Set Volume ) "Volume": Volume value code to be se t on a TV/monitor (0-100) z Ack "Volume": Volume value code to be se t on a TV/monitor (0-100) [...]

48 Preparations 1 1 Preparations Input source control z Function The input so urce of a TV/monit or can be change d using a PC. z Viewing input sour ce state (Get Input Source Status) z Setting the in put source (Se t Input Source ) "Input Source ": An input sou rce code to be set on a TV/monitor  DVI_video, HDMI1_PC and HDMI2_PC canno[...]

49 Preparations 1 1 Preparations z Nak "ERR": A code show ing what error has occurred Screen z Function The screen mode of a TV/monitor can be change d using a PC. Screen mode cannot be c ontrolled whe n the Video Wall function is enab led. This control can only be used on models that include a TV. z Viewing scree n status (Get Screen Mod[...]

50 Preparations 1 1 Preparations Screen size control z Function The screen size of a TV/mo nitor can be changed using a PC . z Viewing the screen size (Get Sc reen Size Status) z Ack "Screen Size": TV/ monitor screen size (range: 0 – 255, unit: inch) z Nak "ERR": A code show ing what error has occurred Header Command ID Data l[...]

51 Preparations 1 1 Preparations PIP On/Off control z Function The PIP mode of a TV/monitor can be turned on or off using a PC.  Only available on models that have the PIP function.  The mode cannot be controlled if Video Wall is set to On .  This function is not available in MagicInfo . z Viewing PIP on/off state (Get the PIP ON / OFF Sta[...]

52 Preparations 1 1 Preparations Auto adjustment control (PC and BNC only) z Function Automatically ad just the PC system screen using a PC. z Viewing auto adjustm ent state (Get Auto Adjustment St atus) None z Setting auto adjustment (Se t Auto Adjustmen t) "Auto Adjustment" : 0x00 (at all times) z Ack z Nak "ERR": A code show [...]

53 Preparations 1 1 Preparations Video Wall Mode Control z Function Video Wall mode can be activate d on a TV/mo nitor using a PC. This contro l is only available on a TV/mon itor whose Video Wall is enabled. This function is not available in MagicInfo . z Viewing video wall mode (Get Video Wall Mode) z Setting the video wall (Set Video Wall Mode) [...]

54 Preparations 1 1 Preparations Safety Lock z Function PC can be us ed to turn t he Safety Lock function on or off on a TV/ monitor. This contro l is available reg ardless of whether o r not the powe r is turned on. z Viewing the saf ety lock state (Get Safety Lock Stat us) z Enabling or disabling safety lock (S et Safety Lock Ena ble / Disable) &[...]

55 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting Check the follo wing before you co nnect this prod uct with other devices. Devices that can be connec ted to this pr oduct include PCs, camcorders , speakers, set top boxes a nd DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints z Before [...]

56 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC z Do not conne ct the power cable befor e connectin g all other ca bles. Ensure you conne ct a source device first be fore connecting the power cable. z A PC can be conne cted to the product in a variety of w ays.[...]

57 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an HDMI-DVI Cable When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. Connection Using an HDMI Cable HDMI IN RGB / DVI / HDMI AUDIO IN HDMI IN[...]

58 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an DP Cable DP IN[...]

59 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selecte d. Changing the Resolution on Windows XP Go to Cont[...]

60 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolution , and chan ge the resolution. 12 34[...]

61 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting an External Monitor z The Loopout function can be used to duplicate the screen of the primary display. Connect [DVI OUT] on the primary display to [DVI IN] or [HDMI IN] on another display. z Up to Full HD resolution can be supported. Compatible input so[...]

62 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4 Connecting to a Video Device z Do not conne ct the power cable befor e connectin g all other ca bles. Ensure you conne ct a source device first be fore connecting the power cable. z You can con nect a video device to th e product using a cable.  Connecting part[...]

63 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4.3 Connection Usin g an HDMI-DVI Cable z Audio will not be enabled if the product is conn ected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a vi[...]

64 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Using an HDMI cable or HDMI to DVI Cable (up to 1080p ) z For better p icture and a udio quality, connect to a digital device u sing an HDMI cable. z An HDMI cable suppo rts digital video an d audio signals, and do es not require an au dio cable.  To connec t the T[...]

65 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4.5 Connecting to an Audio System 2.4.6 Connecting to an Antenna The initial settings p rocess runs automatically w hen the product is turned on for th e first time after purchase. Take extra care to ensure the wires inside the cable do not bend. AUDIO OUT ANT IN VH[...]

66 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.5 Connecting the network box (Sold separately) 2.5.1 MagicInfo To use MagicInfo , a network box (sold sepa rately) m ust be conne cted to the product. For details on how to connect to a network box, refer to the user's manual provided with the network box upon [...]

67 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 3 Select the d efault applicat ion you want to run when MagicInfo start s. 4 Enter the IP in formation. MagicInfo Setup Wizard - v .1.12 Select Application - step 1 MagicInfo Pro (LAN, W AN based version) MagicInfo-i Premium (Web-based version) Select Later < Back([...]

68 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 5 Select a language. (T he default lang uage is English.) 6 Select a display mode . MagicInfo Setup Wizard - v .1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs. Current Language : Engilsh German English French I[...]

69 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 7 Double-check the settings yo u have just co nfigured. z If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom right of the screen. z For further details on how to use MagicInfo , refer to the MagicI[...]

70 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.6 Changing the Input source 2.6.1 Source MENU [] Media Source ENTER [ ] Source allows you to select a va riety of sour ces and chan ge source devic e names. Source You can display the screen of a source de vice connected t o the prod uct. Select a so urce from Sour [...]

71 3 Using MDC 3 Using MDC MDC (Multiple Display Contr ol) is an applicati on that allows you to easily control multiple dis play devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 3.1.1 Configuring settin gs for Multi Control z MDC Connection[...]

72 Using MDC 3 3 Using MDC 3.2 MDC Program Installation/Uninstallation 3.2.1 Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window is not di splayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. 3 Click "Nex[...]

73 Using MDC 3 3 Using MDC 3.3 What is MDC? Multiple display control "MDC" is an application that allows you to easily control mu ltiple display devices simultaneously us ing a PC. 3.3.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C ser ial cable must b e connected to the serial po rts on the PC[...]

74 Using MDC 3 3 Using MDC Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. O ne display d evice can connect to an other using an RS-23 2C serial cable . Connection using a direct LAN cab le Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB. Conne[...]

75 Using MDC 3 3 Using MDC 3.3.2 Connection Management Connection m anagement includes th e Connection list and Connection list modification options . Connection list - Connection list shows the det ails of the connec tions such as con nection setting (IP/ COM, Port No, MAC, and Conn ection T ype ), conn ection status , Set ID Range , and detected [...]

76 Using MDC 3 3 Using MDC 3.3.3 Auto Set ID Auto Set ID feature assigns a Set ID fo r all the LFDs conn ected in daisy-cha in of a selected connection. There can b e a maximum of 100 LFDs in a connec tion. The Set ID is assigned sequentially in th e daisy- chain runnin g from 1 to 99, and th en finally to Set ID 0.[...]

77 Using MDC 3 3 Using MDC 3.3.4 Cloning Using the Cloning feature, you can copy the setting of one LF D and apply it t o multiple selecte d LFDs. You can select specific tab categ ories or all tab categories for cloning, using the co py setting option window.[...]

78 Using MDC 3 3 Using MDC 3.3.5 Command Retry This feature is used to specify the maximu m number of times th e MDC command will be re tried in case of there being no reply or a corrupted reply from an LFD. The retry count va lue can be se t using the MD C options window. The retry co unt value must b e between 1-10. The default va lue is 1.[...]

79 Using MDC 3 3 Using MDC 3.3.6 Getting Started with MDC 1 To start the program, c lick Start Programs Samsung MDC Unified . 2 Click Add to add a disp lay device. z If the connect ion is established via RS232C, go to Serial and specify the COM Port .[...]

80 Using MDC 3 3 Using MDC z If the connect ion is established via Ethernet , enter the IP that was e ntered for the display device.[...]

81 Using MDC 3 3 Using MDC 3.3.7 Main Screen Layout Menu Bar Change the status of a display device or th e properties of the program. Device Category View a list of connected disp la y devices or device groups. Schedule Category View a list of schedules for display devices. Set List Select the display device you want to adjust. Modify the Set List [...]

82 Using MDC 3 3 Using MDC 3.3.8 Menus You can power on or off a selec ted device or change the input source or volum e of the device. Choose display device s from the lis t of sets, an d select the Home tab. Home Select an item an d change the corr esponding setti ng. Power z On : Power on a selected display. z Off : Power off a select ed display.[...]

83 Using MDC 3 3 Using MDC Alert z Fault Devic e  This menu sh ows a list of di splay devices which have fo llowing errors - fan error, t emperature error, brigh tness sensor error , or lamp error. Select a display device from th e list. The Repair button will be enab led. Click the refres h button to refresh t he error status of the d isplay de[...]

84 Using MDC 3 3 Using MDC 3.3.9 Screen Adjustment The screen s ettings (c ontrast, b rightness, etc. ) can be adjus ted. Choose display device s from the lis t of sets, an d select the Picture tab. Custom Select an item an d change the corr esponding screen sett ing. z Color and Tint are not available if the input source is PC . z Red , Green , Bl[...]

85 Using MDC 3 3 Using MDC Green z Customize the intensity of gree n color for the selected display device . Blue z Customize the intensity of blue co lor for the selected display device. Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the g amma value f or the selecte d display. Auto Motio[...]

86 Using MDC 3 3 Using MDC Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does not suppor t detailed configur ation. The -/+ butt ons can be u sed to adju st Zoom . The screen c an be reloca ted using t he up/down/ left/right butt ons. Detail You can v[...]

87 Using MDC 3 3 Using MDC 3.3.10 Sound Adjustment You can chan ge the sound settings. Choose display device s from the lis t of sets, an d select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for th e selected display. Treble Adjust the treb le for the selec ted displ[...]

88 Using MDC 3 3 Using MDC 3.3.11 System Setup Choose display device s from the lis t of sets, an d select the System tab. Video Wall The Vide o Wall functio n can be used to display part of a whole picture or repeat the sam e picture on each of connec ted multiple d isplay devices. Video Wall is enabled only when devices are in the group. Video Wa[...]

89 Using MDC 3 3 Using MDC H Select the number of ho rizontal display devices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of vertical di splay devices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to [...]

90 Using MDC 3 3 Using MDC PIP Basic information re quired to adjust PIP will app ear in the men u screen. z PIP will be disabled when Video Wall is ON . z Note that Picture Size is disabled when PIP is ON . PIP Size View the PIP Size of the cu rrent displa y. PIP Source Select a PIP input source. Sound Select Select and enable the sound fr om eith[...]

91 Using MDC 3 3 Using MDC General User Auto Color Automatically adju st the screen colors. Available only in PC mode. Auto Power Set the prod uct to autom atically powe r on. Standby Control Set the stan dby mode to a ctivate if an input sou rce is not det ected. Fan & Temperature Configure the settings requ ired to de tect the fan sp eed and [...]

92 Using MDC 3 3 Using MDC Security Safety Lock Lock the on -screen men us. To unlock the menus, set Safety Lock to Off . Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off . OSD Display Source OSD Select whether to display a message when the Source is changed. Not Optimum Mode OSD Select whethe r to d[...]

93 Using MDC 3 3 Using MDC Time Clock Set Change the c urrent time o n the selected display devic e accordin g to the time set on a PC . If the time is not set on the display device, null values will be displayed. Timer z On Time : Set the time to powe r on the selec ted display d evice. z Off Time : Set the time to power off the selected display d[...]

94 Using MDC 3 3 Using MDC  Once : Activate the timer only on e time.  EveryDay : Activat e the timer ever y day.  Mon~Fri : Activa te the timer fr om Monday throug h Friday.  Mon~Sat : Activate the timer from Mond ay through Saturday.  Sat~Sun : Activate the tim er on Saturdays and Sundays.  Manual : Customize days of the week. T[...]

95 Using MDC 3 3 Using MDC Screen Burn Protection Pixel Shift Move the scr een slightly at specified tim e intervals to p revent screen burn-in. Screen Saver This function p revents screen burn-in whe n the screen of the selec ted display d evice is left idle for an extended period o f time. z Interval : Set the in terval to activa te the Screen Sa[...]

96 Using MDC 3 3 Using MDC Safety Screen The Safety Screen function can be use d to prevent screen bu rn-in when a stationary imag e displays on the screen of a display device for an extended pe riod of time. Lamp Control Lamp Control is used to adjust the backlight t o reduce po wer consum ption. Automatically adju st the backligh t of the selecte[...]

97 Using MDC 3 3 Using MDC 3.3.12 Tool Settings Security Panel Control Turn on or off the scre en of a display device. Remote Control Enable or disable the remote cont rol. Reset Reset Picture Reset the scre en settings. Reset Sound Reset the sound settings. Reset System Reset the sys tem settings . Reset All Reset the screen, soun d and system set[...]

98 Using MDC 3 3 Using MDC Edit Column Select the items you want to display in the list o f sets. Information View the program i nformation. 3 4[...]

99 Using MDC 3 3 Using MDC 3.3.13 Other Functions Resizing a Window Place the mou se pointer on a corner of the prog ram window. An arrow will appear. Mo ve the arrow to customize the size of the program win dow.[...]

100 Using MDC 3 3 Using MDC Group Management Creating G roups Create groups an d manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group Edit in the display device list section on the left side o f the program window. 2 In the Edit Group window displayed, click Add on the same le vel or Add on [...]

101 Using MDC 3 3 Using MDC z Add on the sub level : Create a sub-group under the selected group. 3 Enter the grou p name. Deleting Groups 1 Select a grou p name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes . The group will be deleted. Renaming Groups 1 Select a grou p name, and click Edit . 2 In the Edit Group[...]

102 Using MDC 3 3 Using MDC Schedule Management Creating Sch edules Create and r egister a sche dule on a gr oup basis. 1 Click All Schedule Lis t in the schedule sec tion on the left side of the program window. The Add button will be enable d in the middle. 2 Click the Add button. The Add Schedule window will appear.[...]

103 Using MDC 3 3 Using MDC 3 Click Add belo w the Device Gr oup item, and select the group you wa nt to add a schedule to. 4 Select Date&Time/Action an d click OK . The schedule will be added and a list of schedules will appear in the set list window. z Device Gr oup : Select a grou p. z Date&Time  Instant Execut ion : Run the schedule [...]

104 Using MDC 3 3 Using MDC 3.3.14 Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emit ted from nearby electronic devices. Issue Solution The display you want to control does not ap pear on th e system information chart. 1. Check the co nnection of the [...]

105 Using MDC 3 3 Using MDC How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is se lected: Settin gs for the sele cted display ar e displayed. 3 When two displays are selected (e. g. in sequence o f ID 1 and ID 3): The settings for ID 1 are displayed b[...]

106 4 Screen Adjustment 4 Screen Adjustment Configure the Picture settings ( Brightness , Color Tone , etc.). The layout of the Picture menu options may vary depending on the product. 4.1 Picture Mode MENU [] Picture Picture Mode ENTER [ ] Select a picture mode ( Picture Mode ) suitable for the environm ent where the prod uct will be used. Differen[...]

107 Screen Adjustment 4 4 Screen Adjustment z BD Wise : Provide s the optimal picture qua lity for Samsung DVD, Blu-ray and Hom e Theater products which sup port BD Wise . When BD Wise is turned On , the picture mode is au tomatically changed to the optimal re solution. Available when you connect Samsung products that support BD Wise through an HDM[...]

108 Screen Adjustment 4 4 Screen Adjustment 4.3 Screen Adjustment MENU [] Picture Screen Adjustment ENTER [ ] 4.3.1 Picture Size If you have a cable b ox or satellite receiver , it may ha ve its own set of screen si zes as well. However, we highly recommen d you use you r product’ s 16:9 mode most of the t ime. z 16:9 : Sets the pict ure to 16:9 [...]

109 Screen Adjustment 4 4 Screen Adjustment z Custom : Changes the resolut ion to suit th e user's pref erences. z Original Ratio : If the inpu t source is PC , DVI , HDMI (PC connection), or DP , the video will display in the origina l aspect ratio. Available ports may differ depending on the model. (page 29) You can adjust and store settings[...]

110 Screen Adjustment 4 4 Screen Adjustment 4.3.2 Position Adjusts the picture po sition. Position is only available if Picture Size is set to Zoom1 , Zoom2 , Wide Fit , Screen fit or Custom . z To use the Position fu nction afte r selecting Zoom1 , Zoom2 , Wide Fit , Screen f it or Custom , follow these steps. 1 Press the button to sele ct Positio[...]

111 Screen Adjustment 4 4 Screen Adjustment 4.4 Auto Adjustment MENU [] Picture Auto Adjustment ENTER [ ] Adjust frequenc y values/posit ions and fine tu ne the setting s automatically. This option is available when the input source is PC . 4.5 Using the 3D function (ME75B model only) MENU [] Picture 3D ENTER [] 4.5.1 3D Mode This exciting new feat[...]

112 Screen Adjustment 4 4 Screen Adjustment  If you want to feel the 3D effect fully, please wear the 3D Active Glasses first, and the n select 3D Mode from the list below that pr ovides the best 3d viewing experience.  When watching 3D images, turn on 3D Active Glasses.  Some file format may not supported the “2D 3D.”  “Side by S[...]

113 Screen Adjustment 4 4 Screen Adjustment If a 3D failure occurs due to a 3D information error, set 3D Auto View to Off and manually select a 3D Mode using the corresponding menu. z 3D Optimize : The overall a djustment of 3D effe ct. Support resolution (16:9 only) Resolution supported for HDMI PC mode The resolution for HDMI PC mode is optimi ze[...]

114 Screen Adjustment 4 4 Screen Adjustment Supported for mats and operat ing specific ations for Stan dard HDMI 3D The 3D formats indicated below are recommended by the HDMI association and must be supported. For the Standa rd HDMI 3D format with 24Hz, the produ ct is optimized as follows. z Judder Reduc tion Display Mo de: When Auto Motion Plus i[...]

115 Screen Adjustment 4 4 Screen Adjustment 4.6 Advanced Settings MENU [] Picture Advanced Settings ENTER [ ] All Advanced Sett ings are availab le in the Standard and Movie modes. To use, select an option us ing the up and down arrow keys, and then press [ ]. Use the ar row keys to change the value or se tting, and then press [ ]. In PC mode, you [...]

116 Screen Adjustment 4 4 Screen Adjustment 4.6.4 Gamma Adjust the primary color intensity. 4.6.5 Expert Pattern Use the Expert Pattern function to calibrate th e picture. If the OSD menu disappears o r a menu oth er than the Pictur e menu is op ened, the product save s the calibra tion and the Expert Pattern screen disappears. z Off Turns the Expe[...]

117 Screen Adjustment 4 4 Screen Adjustment 4.6.9 10p White Balance (Off / On) Controls th e white bala nce in 10 po int interval by adjusting the red, gre en, and blue brightness. z Interval : Select interval to ad just. z Red : Adjust the red level. z Green : Adjust the green level. z Blue : Adjust the blue l evel. z Reset : Resets the 10p White [...]

118 Screen Adjustment 4 4 Screen Adjustment 4.7 Picture Options MENU [] Picture Picture Options ENTER [ ] Select an option u sing the and arrow keys, an d the press [ ]. Use the arro w keys to change the setting, and the n press [ ]. In PC mode, you can only make changes to the Color Tone . 4.7.1 Color Tone z Off / Cool / Standard / Warm1 / Warm2 z[...]

119 Screen Adjustment 4 4 Screen Adjustment 4.7.3 Digital Noise Filter If the broadca st signal received by yo ur product is we ak, you can activat e the Digital Nois e Filter feature to reduce any stat ic and ghosting that may appear on t he screen. z Off / Low / Medium / High / Auto / Auto Visualization z Auto Visualization : When changing analog[...]

120 Screen Adjustment 4 4 Screen Adjustment 4.7.7 Auto Motion Plus Removes blur a nd judder fr om scenes with larger amo unts of rapid movement to provide a cle arer picture. The menu names may vary depending on the country. This feature ca n be used to view fast moving scenes. z Off : Switche s Auto Motion Plus off. z Clear : Sets Auto Mo tion Plu[...]

121 5 Sound Adjustment 5 Sound Adjustment Configure the sound ( Sound ) settings for the product. 5.1 Sound Mode MENU [] Sound Sound Mode ENTER [ ] Use the up an d down arro w keys to selec t an option , and then p ress [ ]. z Standard : Selects th e normal sound mode. z Music : Emphasizes mus ic over voices. z Movie : Provides the best so und for [...]

122 Sound Adjustment 5 5 Sound Adjustment 5.2 Sound Effect MENU [] Sound Sound Effect ENTER [ ] z If Speaker Select is set to External , Sound Effect is disabled. z Available only when Sound Mode is set to Standar d . z SRS TruSurround HD ( Off / On ) This funct ion provides a virtual 5.1 c hannel surrou nd sound exp erience thro ugh a pair of spea[...]

123 Sound Adjustment 5 5 Sound Adjustment 5.3 3D Audio (ME75B model only) MENU [] Sound 3D Audio ENTER [] 5.3.1 3D Audio (Off / Low / Medium / High) 3D audio tech nology prov ides the imme rsive sound correspond ing to the po p-up effect of 3D video b y audio depth control in pe rspective. z Available in only when watching 3D imag e. 5.4 Broadcast [...]

124 Sound Adjustment 5 5 Sound Adjustment 5.5 Speaker Settings MENU [] Sound Speaker Settings ENTER [ ] z Speaker Select ( External / Internal ) If you are listen ing to the s ound track of a broadcast or movie throu gh an exter nal receiver, yo u may hear a sound e cho caused by the differenc e in decodin g speed betwe en the TV’s sp eakers and [...]

125 6 Media 6 Media 6.1 Favorites MENU [] Media Favorites ENTER [ ] View all of your favorite ch annels. Your favorite cha nnels are organized in up to five group s ( Favorites 1 - 5 ). If you want to chan ge from one favorite g roup to an other, follow t hese steps. z View Mod e : Toggles betwee n the Text view and Thumb nail view of your favorite[...]

126 Media 6 6 Media 6.1.1 Using Edit Mode to Delete a Favorite 1 Select the Edit Mode on the up per right of your screen, and then pr ess the [ ] button. 2 P r e s s t h e /// b u t t o n s t o s e l e c t a c h a n n e l , a n d t h e n p r e s s [ ] . A c h e c k a p p e a r s t o t h e l e f t of the channel. z You can select more than one chann[...]

127 Media 6 6 Media Using the TOOLS button with Channel z Edit Favorites : You can re gister frequen tly watched channels to the Favorites. z Lock / Unlock : You can lock som e of the channels so that your children cannot watch inappropriat e programs . When you set the Lock to On , you can use the Lock function. z Channel Name Edit (Only fo r anal[...]

128 Media 6 6 Media 6.2.2 Antenna MENU [] Media Channel Antenna ENTER [ ] Choose your prefe rred method of rece iving digital br oadcasts. z Air / Cable 6.2.3 Auto Program MENU [] Media Channel Auto Program ENTER [ ] Scan all frequen cies for br oadcast signa ls and store channels fo und. z The Auto Program operation takes about 6~7 minutes. z The [...]

129 Media 6 6 Media 6.3 MagicInfo Lite MENU [] Media Magi cInfo Lite ENTER [ ] Press the MagicInfo Lite button on the remote contro l. MagicInfo Li te Player allow s you to pla y content ( image, video, document files) at a desire d time. You can play conte nt saved in in ternal memor y or USB memory. Yo u can also play content via Ma gicInfo Lite [...]

130 Media 6 6 Media Supported Video Subitle Formats (for language subtiles, etc.) Supported Video Formats Name File extension Format MPEG-4 time-based text .ttxt XML SAMI smi HTML SubRip .srt string-base d SubViewer .sub string-based Micro DVD .sub or .tx t str ing-based File Extension Cont ainer Video Codec Resolution Frame rate (fps) Bit rate (Mb[...]

131 Media 6 6 Media z Video content will not play, or not play correctly, if there is an error in the content or the container. z Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above. z If the Index Table is in error, the Seek (Jump) function is not supported. z You [...]

132 Media 6 6 Media Using the Play Continuously Function (Resume Play) If you exit a mo vie when it is pl aying, you can play the mov ie later from t he point wher e you stoppe d it. The Resume function does not support multiple users. (It will only memorize the point where the most recent user stopped playing.) 1 Select the movie file you stoppe d[...]

133 Media 6 6 Media 6.5 Photos MENU [] Media Photos ENTER [ ] Connecting a USB De vice 1 Turn on your product. 2 Connect a USB device co ntaining phot o, music and/or movie f iles to the USB port on th e back or side panel of th e product. 3 When a USB device is connec ted to the produ ct, the Connected Dev ice screen appear s. Select a connected d[...]

134 Media 6 6 Media 6.6 Music MENU [] Media Music ENTER [ ] Connecting a USB De vice 1 Turn on your product. 2 Connect a USB device co ntaining phot o, music and/or movie f iles to the USB port on th e back or side panel of th e product. 3 When a USB device is connec ted to the produ ct, the Connected Dev ice screen appear s. Select a connected dev[...]

135 Media 6 6 Media Playing My Playlist Select the My Playlist fol der and it will play aut omatically. Press the or button to play a differe nt music file within th e play list. To delete a file from My Playlist , select the recycle bin icon next to the file you want to delete by using the direction buttons, and then press [ ]. The file will be de[...]

136 Media 6 6 Media 6.7 Videos / Photos / Music - Additional Functions 6.7.1 Sorting the file lists To sort files in the file lists, select the ( Sorting ) icon in the top right of the screen by using the / / / button. Then, press the [ ] button. The checks below indicate which media the sort criteria apply to. Sort Criteria Operation Videos Photos[...]

137 Media 6 6 Media 6.7.2 Videos / Photos / Music Play Option menu When playing video or phot o files, you can p ress the TOOLS button to display an Option s menu. Below are a se ries of tables listing the options available and the media ea ch option applies to. Option Name Operations Videos Photos Music List Return to the file list. Play / Pause Y[...]

138 Media 6 6 Media z Pressing the INFO button while a device name is selected will display information about the selected device. z Pressing the INFO button while a file is selected w ill display information about the selected file. Start Slide Show / Stop Slide Show You can start or stop a slide sho w. Alternatively, use the or button on the remo[...]

139 Media 6 6 Media 6.8 Source MENU [] Media Source ENTER [ ] Source allows you to select a va riety of sour ces and chan ge source devic e names. 6.8.1 Source You can display the screen of a source de vice connected t o the prod uct. Select a so urce from Sour ce List to display the screen of the selected source. The input source can also be chang[...]

140 Media 6 6 Media 6.8.2 Edit Name MENU [] Media Source TOOLS Edit Name ENTER [ ] You can rena me a conn ected sourc e device. z Sometimes the scr een will not d isplay properly un less the name of a source device is specified in Edit Name . In addit ion, it is best t o rename the source device i n Edit Name to obtain optimal picture quality. The [...]

141 7 Network 7 Network 7.1 Network Setting 7.1.1 Connecting to a Wired Network There are t hree ways to a ttach your p roduct to yo ur LAN using c able. z You can at tach your produc t to your LAN by co nnecting the LAN port on the ba ck of your produ ct to an external mod em using a LAN cable. See the dia gram below. z You can at tach your produc[...]

142 Network 7 7 Network access the Inte rnet so you do not hav e to enter th em manually. M ost home ne tworks are Dyn amic Networks. Some networks requ ire a Static IP address. If your network requires a Stat ic IP address, you must enter the IP address, subn et mask, gat eway, and DNS va lues manually on your produ ct Cable Setup Screen w hen you[...]

143 Network 7 7 Network Automatic Network Settings Use the Automatic Network Se ttings when connecti ng your product to a network that suppor ts DHCP. To set up yo ur product cable networ k connection automatically , follow these steps. How to set up automat ically 1 Go to the Network Settings screen. 2 Select Wired , press [ ], and then press [ ] [...]

144 Network 7 7 Network If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time. 9 When done en tering the IP Address , press [ ]. 10 Press the down arrow key to go to the Subnet Mask fields, and t hen press [ ]. 11 Repeat the same entry [...]

145 Network 7 7 Network 7.1.3 Connecting to a Wireless Network To connect yo ur product to your network wir eless, you need a wirele ss router or modem an d a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port. See the illustration below. Samsung’s Wire less LAN adapter is sold sep[...]

146 Network 7 7 Network  WPS (PBC)  One Foot Connection z The product may not recognize the Samsung Wireless LAN adapter if you connect it to the product with a USB hub or USB extension cable ot her than the cable supplied with the product. 7.1.4 Wireless Network Setting Automatic Network Setup Most wireless networks have an op tional securit[...]

147 Network 7 7 Network Manual Network Setup Use the Manual Network Se ttings when conne cting your produc t to a network that requ ires a Static IP address or if th e automatic co nnection proce ss has failed. Getting the Netw ork Connecti on Values To view the Ne twork connectio n values on most Wind ows computers, fo llow these step s. 1 Right c[...]

148 Network 7 7 Network 13 Repeat the entry p rocess for each field in the IP Address . If you make a mistake when entering a number, re-enter the number to correct it. You can also press the or button to change the number one unit at a time. 14 When done en tering the IP A ddress , press [ ]. 15 Press the button t o go to the Subnet Mask fields, a[...]

149 Network 7 7 Network 7.1.6 One Foot Connection The One Foot Co nnection fu nction lets you conne ct your Samsung p roduct automatically to a Sam sung wireless routers. If your wi reless router does not support One Foot Co nnection , you must connect u sing one of the other meth ods. You can check for equipment that supports One Foot Connection o[...]

150 Network 7 7 Network 7.1.7 Ad Hoc Network Setup You can conn ect to a mo bile device suppor ting Ad-hoc c onnections withou t a wirele ss router or AP through the produ ct. How to set up using Ad hoc 1 Go to Network Settings screen. 2 Select Wireless (General) , and press [ ], then press [ ] again. 3 Select Ad hoc . The message “ Ad hoc servic[...]

151 Network 7 7 Network 7.3 MagicInfo Lite Settings MENU [] Network MagicInfo Lite Settings ENTER [ ] 1 Server z Setting the Mag icInfo Lite Server IP  Enter the serv er IP address a nd port num ber. Use 700 1 as the po rt number. If unable to connect to the server using port number 7001, check with your server administrator to find the correct [...]

152 8 System 8 System 8.1 Plug & Play MENU [] System Plug & Play ENT ER [ ] When the product is initially powered on, a sequence of on-scr een prompts will assist in configuring basic settings. Press the [ ] button. Plug & Play is available o nly when the Input Source is set to TV . 1 Selecting a language Press the or button, th en pres[...]

153 System 8 8 System 8.2 Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 8.2.1 Configuring settin gs for Multi Control z MDC Connection Select a method to connect to MDC to receive th e MDC signal.  RS232C MDC Communicate with MDC via the RS232C- stereo cable.  RJ45 MDC Communicate with MDC via t[...]

154 System 8 8 System 8.3 Time MENU [] System Ti me ENTER [ ] You can configu re Clock Set or Sleep Timer . You can also set the produ ct to automatica lly turn on or off at a specified time using the Timer function. 8.3.1 Clock Set the cloc k to use the v arious variou s timer feat ures of the p roduct. Changing the Setting for Clock z Clock Mode [...]

155 System 8 8 System 8.3.3 On Timer Set On Timer so that you r product turns on auto matically at a tim e and on a day of you r choosing. z On Timer : You ca n set up thre e separate On Timer configurations. ( On Timer 1 , On Tim er 2 , On Timer 3 ) You must set the clock before you can use On Timer .  Setup : Select Off , Once , Everyday , Mon[...]

156 System 8 8 System 8.3.4 Off Timer You can set up three separ ate Off Timer configurations. ( Off Timer 1 , Off Timer 2 , Off Timer 3 ) You must set the clock before you can use Off Timer . z Setup : Select Off , Once , Everyday , Mon~F ri , Mon~Sat , Sat~Sun or Manual . If you select Manual , you can choose the days you want Off Timer to turn o[...]

157 System 8 8 System 8.4 Menu Language MENU [] System Menu Language ENTER [ ] Set the menu language. 1 Select Menu Langu age and press the [ ] button. 2 Choose desir ed language and press the [ ] button. Choose between 한국어 and English . 8.5 Eco Solution MENU [] System Eco Solution ENTER [ ] 8.5.1 Energy Saving Save power with th e Energy Sav[...]

158 System 8 8 System 8.5.2 Eco Sensor (Off / On) To enhance your power savings , the picture settings will automat ically adapt to the light in the room . If you adjust Backlight in the Picture menu, Eco Sensor will be set to Off . z Min. Backlight : When Eco sensor is On , you can manually adjust the minimum scree n brightness. If Eco Sensor is O[...]

159 System 8 8 System 8.6 Caption MENU [] System Caption ENTER [ ] (On-Screen Text Messages) 8.6.1 Caption You can switch the capt ion function on or off. If captions are not available, th ey will not be displayed on the screen . z Off / On The Caption feature does not work with devices connected to the product through the Component, HDMI or PC inp[...]

160 System 8 8 System 8.6.3 Digital Caption Options (digital chan nels only) Adjusts th e each option. When done, select Close . z Size : Options in clude Default , Small , Standard and Large . The defau lt is Standard . z Foreground Co lor : You can change the color of the lett ers. Options includ e Default , White , Black , Red , Green , Blue , Y[...]

161 System 8 8 System 8.7 Security MENU [] System Security ENTER [ ] Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". Th e PIN screen closes and t he Security menu appears. 8.7.1 Safety Lock (Off / On) It sets safe lock function. All the menus a nd buttons of t he product and r[...]

162 System 8 8 System 8.7.3 Channel Lock (Off / On) Lock channe ls in channel m anager, to prevent una uthorized user s, such as c hildren, from watching unsuitable prog ramme. z Available only when the input Source is set to TV . z The default PIN number of a new TV set is “0-0-0-0”. z If you forget the PIN, press the r emote-contro l buttons [...]

163 System 8 8 System 8.8 PIP MENU [] System PIP ENTER [ ] z For PIP sou nd, refer to the Sound Select instructio ns. z If you turn th e product off while watch ing in the PIP mo de, the PIP function is reset to off. When you turn your product o n, you must turn PI P on again to wat ch in the PIP mo de. z You may notice that the pi cture in the PIP[...]

164 System 8 8 System 8.9 Auto Protection Time MENU [ System Auto Protection Time ENTER [ ] If the screen displays a still image for a certain period of time you define, the product ac tivates the screen saver to pre vent the fo rmation of burnt in gho st images on t he screen. z Off / 2 hours / 4 hours / 8 hou rs / 10 hours 8.10 Screen Burn Protec[...]

165 System 8 8 System 8.10.1 Pixel Shift Configure Pixel Shift to prevent screen damage. Available Pixel Shift Settings and Optimum Settings z The Pixel Shift value may differ depending on the product size and mode. z This function is not available in the Screen Fit mode. z Horizontal : Se ts how many pixels th e screen moves horizont ally. z Verti[...]

166 System 8 8 System 8.10.4 Side Gray Select the brightn ess of the grey f or the screen bac kground. z Off / Light / Dark 8.11 Video Wall MENU [] System Video Wall ENTER [ ] Customize the layout of mult iple displays th at are conn ected to for m a video wa ll. In addition , display pa rt of a whole pic ture or rep eat the same picture on each of[...]

167 System 8 8 System 8.11.2 Format Select a format to display im ages on multiple displays. z Full : Display images in full screen. z Natural : Display images at the original res olution without enlarging o r reducing. The Format option is only enabled when Video Wall is set to On . 8.11.3 Horizontal This function auto matically divides t he scree[...]

168 System 8 8 System 8.11.5 Screen Position You can custo mize the arra ngement of s plit screens by m oving displays ide ntified with a number using the Screen Position function. Select Screen Position to display t he arrangement of displays (identifie d with a numb er) specified according to t he Horizontal or Ve rtical settings. T o customize t[...]

169 System 8 8 System 8.12 Source AutoSwitch Settings MENU [] System Source AutoSwitch Settings ENTER [ ] Turning on the di splay with Source Au toSwitch On , and the previous vide o source selectio n is not active, the display will automatica lly search th e different video input so urces for active video. z Source AutoSwitch When the Source AutoS[...]

170 System 8 8 System 8.13 General MENU [] System General ENTER [ ] 8.13.1 Max. Power Saving Turns off the p roduct to re duce power c onsumption af ter the PC has bee n left idle for a specified period of time. Available only PC mode. 8.13.2 Game Mode When connec ting to a gam e console suc h as PlayStat ion™ or Xbo x™, you can en joy a more r[...]

171 System 8 8 System 8.13.3 BD Wise Provides the optim al picture quality f or Samsung DVD, Blu-ray and Home Theater produc ts which support BD Wise . When BD Wise is turned On , the picture m ode is automat ically changed to the optimal resolution. Available when you connect Samsung products tha t support BD Wise through an HDMI cable to the prod[...]

172 System 8 8 System 8.13.8 Power On Adjustment You can set the warm -up time for the screen to turn on after the pow er button is pre ssed. (Range: 0 – 50 seconds) A warm-up time that is too short may damage the product due to overvoltage. 8.13.9 Temperature Control This function d etects the int ernal temper ature of the p roduct. You c an spe[...]

173 System 8 8 System 8.13.11 3D Video Sync (ME75B model only) Synchronize the d isplays with your 3 D glasses when viewing a 3D video using multiple displays. Current Mode : Select the desire d option from Stand- Alone , Main , and Secon dary . Main Device Number : If you set Current Mo de to Main , the curren t display will be set as the prima[...]

174 System 8 8 System 8.14 Anynet+(HDMI-CEC) MENU [] System Anynet+(HDMI-CEC) ENTER [ ] 8.14.1 Anynet+(HDMI-CEC) What is Anynet+? Anynet+ is a function that enable s you to control all con nected Samsung de vices that support Anynet+ with your Samsung product rem ote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ fe[...]

175 System 8 8 System Anynet+ Menu The Anynet+ me nu changes d epending on the type and status of the Anynet+ devic es connected to the product. 8.14.2 Auto Turn Off (No / Yes) Setting an Anynet+ Device to t urn Off automatica lly when the p roduct is turne d off. z If Aut o Turn Off is set to Yes , running external devices will turn off at the sam[...]

176 System 8 8 System z If you have selected an Anynet+ device by pressing the SOURCE button and then selecting its input source, you cannot use the Anynet+ function. Make sure to switch to an Anynet+ device by using the Device List . 8.14.3 Receiver You can listen to sound th rough a Receiver (i.e. Home The ater) instead of the product Sp eaker. T[...]

177 System 8 8 System 8.15 DivX® Video On Demand MENU [] System DivX® Video On Demand ENTER [ ] Shows the reg istration code authorized fo r the produ ct. If you con nect to the DivX web site a nd register using that co de, you can d ownload the VOD registratio n file. For more information about DivX® VOD, visit “http://vod.divx.com”. The me[...]

178 System 8 8 System 8.16 Network Remote Control MENU [] System Network Remote Control ENTER [ ] Turn on/off or give perm ission to Samsun g mobile phone devices to co nnect with and c ontrol the product. You must have a Samsung Mobile phone/device w hich supports Wire less Remote Contr ol. For more details, refe r to each de vice’s manu al. 8.1[...]

179 9 Support 9 Support 9.1 Software Upgrade MENU [] Support Software Upgrade ENTER [ ] The Software Upgrade menu lets you upg rade your TV’s so ftware to the latest version. 9.1.1 By USB Insert a USB drive containin g the firmware upgrade file, downloaded from “ww w.samsung.com/se c,” into the TV. Please b e careful not to disconnect the p o[...]

180 10 MagicInfo Lite 10 MagicInfo Lite 10.1 File Formats Compatible with MagicInfo Lite Player 10.1.1 Video / Audio [Read before usin g MagicInfo Lite Player ] z Supported USB-device file systems include FAT16 and FAT32 . (NTFS is not supported.) z A file with a vertical and horizontal r esolution larger than t he maximum resolut ion cannot be pla[...]

181 MagicInfo Lite 10 10 MagicInfo Lite *.mp4 MP4 H . 2 6 4 B P / M P / HP 1920 x 1080 6 ~ 30 25 MP3 / ADPCM / AAC MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 *.3gp 3GPP H . 2 6 4 B P / M P / HP 1920 x 1080 6 ~ 30 25 ADPCM / AAC / HE-AAC MPEG4 SP / ASP 1920 x 1080 6 ~ 30 8 *.vro VRO VOB MPEG1 352 x 288 24 / 25 / 30 30 AC3 / MPEG / LPCM MPEG2 1920 x 1080 24[...]

182 MagicInfo Lite 10 10 MagicInfo Lite Audio z Audio content witho ut video is not supported . (Only mp3 files a re supported as bac kground music for image/PPT slides hows. This feat ure is available only when using the netw ork schedule me nu.) z Audio content with a Bit ra te or Frame rate larger than the rate specified in the table above can c[...]

183 MagicInfo Lite 10 10 MagicInfo Lite Power Point z Compatible docume nt file format s  Extension : ppt, pptx  Version : Office 97 ~ Offic e 2007 z Functions not supported  Animation effect  3D shapes (which wil l be displayed in 2D)  Header and footer (some subitems ar e not suppo rted)  Word Art  Align (A group a lignment e[...]

184 MagicInfo Lite 10 10 MagicInfo Lite 10.2 Network Schedule 10.2.1 Connecting to a server Network setup To run Ma gicInfo Li te , connect t o a network. Refer to 141 page for details about the Networ k Settings menu. Server setup Go to MENU Network MagicInf o Lite Settings Server . Next, enter the server informatio n. (E.g.: http ://192.168. 0.10[...]

185 MagicInfo Lite 10 10 MagicInfo Lite 10.2.2 MagicInfo Lite Settings MENU [] Media MagicI nfo Lite ENTER [] Press the MagicInfo Lite button on the remote contro l. You can view wh ether the serv er is connected (a pproval) in the MagicInfo Lite menu screen. To view whether the server is conne cted when a ne twork schedu le is running, p ress INFO[...]

186 MagicInfo Lite 10 10 MagicInfo Lite 3 Select Device fr om the top me nu bar. 4 Select Lite Device from the menus on the left. 5 Select View Unapproved Lite De vice from the s ub-menus o f Lite Device . 6 Select the Approve button for your device from the list of unapproved Lite devices. Pressing the INFO button on the remote when a network sche[...]

187 MagicInfo Lite 10 10 MagicInfo Lite 7 Enter the in formation requ ired to approve th e device. z Device Na me : Enter the device name. z Device Model Name : Select your device model. z Device Gr oup : Select to specify the g roup. z Location : Enter the curren t location of t he device. 8 Select the View All Lite Device m enu to chec k that the[...]

188 MagicInfo Lite 10 10 MagicInfo Lite 10.2.4 Setting the current time A schedule m ay not ru n if the time set on the device is different from the serv er's current time. 1 Go to the tabs Device Time . 2 Select your de vice. 3 Select Clock Set , and sync the time with the serv er. For further details on how to manage the time (scheduling, ho[...]

189 MagicInfo Lite 10 10 MagicInfo Lite 10.3 Local Schedule Run a schedule cr eated by Local Schedule Manager . Go to Local Schedule Manager Sele ct the conte nt you wan t to run This menu is disabled if no schedule was created by Local Schedule Manager . 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Run a schedule cr eated [...]

190 MagicInfo Lite 10 10 MagicInfo Lite 2 Select Create in the Local Schedule Manager scre en. 3 Select Time to set the tim e you want t o play conten t. 4 Select Contents to specify the content you want to play . 5 Select Save . Local Schedule Manager Storage Internal Memory No Playing Schedule Create Edit Delete Run Info Close Create T ime Conten[...]

191 MagicInfo Lite 10 10 MagicInfo Lite 6 Select the memory space you wan t to save the co ntent to. 7 Check that the schedule h as been add ed to the Local Schedule Manager . Create T ime Conten T ime Conten 12:00 am ~ 02:00 pm Delete Save ancel Where do you want to save? Internal USB Cancel Local Schedule Manager Storage Internal Memory No Playin[...]

192 MagicInfo Lite 10 10 MagicInfo Lite 10.4.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local schedule you want to m odify. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay USB AutoPlay Cl[...]

193 MagicInfo Lite 10 10 MagicInfo Lite 3 Select Edit . 4 Change the d etails of the lo cal schedule . Next, selec t Save . 10.4.3 Deleting a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. Edit T ime Contents T ime Contents 12:00 am ~ 02:00 pm Menu1.jpg --:-- am ~[...]

194 MagicInfo Lite 10 10 MagicInfo Lite 2 Select the local schedule you want to d elete. 3 Select Delete . Local Schedule Manager Storage Internal Memory No Playing Schedule 201 10101_1200.Isch Create Edit Delete Run Info Close Local Schedule Manager Storage Internal Memory Do you want to delete schedule? 201 Create Edit elete Run Info Close Ye s N[...]

195 MagicInfo Lite 10 10 MagicInfo Lite 10.4.4 Running a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local sche dule you want to run. Next, sele ct Run . Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Internal AutoPlay [...]

196 MagicInfo Lite 10 10 MagicInfo Lite 10.4.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from local schedule to network schedule. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select Stop . Network Schedule Local Schedule ・ Local Schedule[...]

197 MagicInfo Lite 10 10 MagicInfo Lite 10.4.6 Viewing the detail s of a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the loca l schedule you want t o view the details of. 3 The details of the sc hedule will be disp layed. Network Schedule Local Schedule ・ Local Schedule Manager Contents Manager Inte[...]

198 MagicInfo Lite 10 10 MagicInfo Lite 10.5 Contents Manager 10.5.1 Copying content 1 Select Contents Manager in the MagicInfo Lite menu screen. 2 Select the cont ent you want to copy. z If content under Internal Memory is selected : You can c opy the c ontent under Internal Memory to USB memory . z If content under USB is selected : You can cop y[...]

199 MagicInfo Lite 10 10 MagicInfo Lite 10.5.2 Deleting content 1 Select Contents Manager in the MagicInfo Lite menu screen. 2 Select the conten t you want to d elete. z Content un der Internal Memory and US B memory can be delete d at the same time. 3 Select Delete . Network Schedule Local Schedule · Local Schedule Manager Contents Manager Intern[...]

200 MagicInfo Lite 10 10 MagicInfo Lite 10.6 Internal AutoPlay 10.6.1 Running Internal AutoPlay Ensure at least one content item exists under Internal Memory . 1 Select Internal AutoPlay in the MagicInfo Lite menu screen. z Play content, which has been copi ed to Internal Memory , in alphabetical o rder. 10.7 USB AutoPlay 10.7.1 Running Internal Au[...]

201 MagicInfo Lite 10 10 MagicInfo Lite z USB AutoPlay wi ll automatically run if US B memory is connected whe n Network Schedule or Local Schedule is running. 10.8 When Content is Running 10.8.1 Viewing the details of the content that is running Press the INFO button on the remote control. 1 Software Versio n : Displays the software versio n of a [...]

202 MagicInfo Lite 10 10 MagicInfo Lite 7 Schedule Download : Displays the progress of a network sche dule being downloade d from the server 10.8.2 Changing the settings fo r the content that is running Press the TOOLS button on the remote control. You can chan ge the Picture Mode or Sound Mode setting or safely remove a USB device ( Safely Remove [...]

203 11 Troubleshooting Guide 11 Troubleshooting Guide 11.1 Requirements Before Co ntacting Samsung Customer Service Center 11.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is oper ating normally b y using[...]

204 Troubleshooting Guide 11 11 Troubleshooting Guide 11.1.3 Check the followings. Installation issue (PC mode ) The screen keeps swit ching on a nd off. Check th e cable co nnection betw een the product and PC, and ensu re the conne ction is secure. ("2.2 Conn ecting and Usi ng a PC") Blank spaces are fou nd at the top and bottom of the [...]

205 Troubleshooting Guide 11 11 Troubleshooting Guide The screen is not clear. T he screen is blurry. Adjust Coarse and Fine . Remove any accessories (vid eo extension cable, etc) an d try again . Set the resolution and frequency to the recommended level. The screen ap pears unstab le and shaky. Check that the reso lution and fre quency of the PC a[...]

206 Troubleshooting Guide 11 11 Troubleshooting Guide Remote control issue The remote con trol does not w ork. Make sure that the batter ies are correctly in place (+/ -). Check if the ba tteries are flat. Check for po wer failure. Make sure th at the pow er cord is connected. Check for any special lighting or neon sign s switched on in the vicinit[...]

207 Troubleshooting Guide 11 11 Troubleshooting Guide 11.2 Q & A Question Answ er How can I change the frequency? Set the frequ ency on your graphics card . z "Windows XP": Go to Control Panel Appearance an d Themes Display Settings Advanced Monitor and adjust the fr equency in Monitor Settings . z "Windows ME/ 2000": Go to [...]

208 Troubleshooting Guide 11 11 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment.. How can I change the resolution? z "Windows XP": Go to Control Panel Appearan ce and Themes Display Settings and adjust the resolution. z "Windows ME/2000" : Go to Control Panel Dis[...]

209 12 Specifications 12 Specifications 12.1 General Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if de sire[...]

210 Specifications 12 12 Specifications This device is a Class A digital apparatus. 12.2 PowerSaver The power-sa ving functio n of this pro duct reduce s power con sumption by sw itching off the screen and changing the co lor of the power LED if the produc t is not used fo r a specified per iod of time. The power is not turned off in powe r-saving [...]

211 Specifications 12 12 Specifications 12.3 Preset Timing Modes z This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the opti[...]

212 Specifications 12 12 Specifications Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. Vertical Frequency The product displays a single image m[...]

213 Specifications 12 12 Specifications 12.4 License TheaterSound HD, SRS and sym bol are trademar ks of SRS Labs, In c. TheaterSound HD technology is inco rporated under lice nse form SRS Lab, Inc. Manufactur ed under license from Dol by Laboratories. Dolby and th e double- D symbol are trademarks of Dolb y Laboratories. Manufactured un der licens[...]

214 Appendix Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. Customer Care Center 1588-3366 Web : www.samsungsvc.co.kr[...]

215 Appendix Appendix Responsibility for the Pay Se rvice (Cost to Customers) When the service is requested, in spite of in warra nty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustme nt, Explanation, Re-installation and etc. z If a service tech nician gives instr[...]

216 Appendix Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality z To enjoy the op timum picture quality, go to Co ntrol Panel on you r PC and adjust th e resolution a nd refresh rate as follows. Th e picture quality of TF T-LEDs may degrad e if the optimum reso lution is not selected.  Resolution: 1920 X 1[...]

217 Appendix Appendix Prevention of Afterim age Burn-in What is afteri mage burn-in? Afterimage bu rn-in should not o ccur when th e LCD panel is operating normally. No rmal operat ion refers to a continuously chan ging video patter n. If the LCD panel dis plays a fixed patter n for an extended perio d of time (more than 1 2 hours), a slight voltag[...]

218 Appendix Appendix z Powering Off, Screen Save r and Power Saving Mode  Power off th e product for 2 hours after using it for 1 2 hours.  Go to Display Prop erties > Power Su pply on your PC and set the produ ct to power off as required.  Using a s creen saver is r ecommende d. It is best to use a single-color or moving-image screen [...]

219 Appendix Appendix Terminology Dot Pitch The product and scree n consist of re d, green and blue dot s. A shorter dist ance betwee n the dots produces a hig her resolutio n. Dot pitch refer s to the distance between the sho rtest distanc e between dots of the same color. Dot pi tch is measured in millimeters. Vertical Frequency The product disp [...]

220 Appendix Appendix Multiple Display Control (MDC) MDC (Multiple Disp lay Control) is an ap plication that allows multiple display devices to be co ntrolled simultaneously using a PC. Communica tion between a PC and monitor ta kes place using RS232C (serial data transmissio n) and RJ45 (LAN) cables. DVD(Digital Versatile Disc) DVD refers to a CD-[...]

Index 221 Index Numerics 3D Mode 111 3D Video Sy nc 173 A Antenna 65 Anynet+(HDMI-CEC) 174 B Batteries 32 C Caption 159 Change PIN 162 Clock Mode 154 Contact SAMSUNG WORLD WIDE 214 Custom settings screen 107 E Eco Solution 157 Edit Name 140 Energy Saving 157 External sensor KIT 27 F Favorites 125 G Game Mode 170 I Items sold separately 24 M MagicIn[...]

Index Index 222 V Video conn ection 62 Videos 129 W What is MDC? 73 Wired Network 14 1 WPS(PBC) 148[...]