Samsung S23A750D manual

User Manual SyncMaster S23A750D / S27A750D The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance. BN46-00036A-05[...]

2 Before Using the Product Before Using the Product Copyright The content s of this manua l are subjec t to change with out notice to improve qua lity. 2011 Samsung Elec tronics Samsung Electro nics owns th e copyright fo r this man ual. Use or reproduction of this manual in part s or entirety with out the autho rization of Samsung Electronic s is [...]

3 Before Using the Product Before Using the Product Activities marked by this symbol are p rohibited. Instructions marked by th is symbol must be followed.[...]

4 Before Using the Product Before Using the Product Cleaning Cleaning Exercise care when cleaning as th e panel and exte rior of advanced LCDs are easily scr atched. Take the following steps when c leaning. 1. Power off the monitor and computer. 2. Disconnect the power c ord from the monitor. Hold the power cable by the plug and do not touch the ca[...]

5 Before Using the Product Before Using the Product Securing the Installation Space z Ensure some space aroun d the product for ventilation. An internal te mperature rise may cause f ire and damage the produc t. Be sure to allow the amount of space as s hown below or greater when installing the pr oduct. The exterior may differ depending on the pro[...]

6 Before Using the Product Before Using the Product Warning Do not use a damaged p ower cord o r plug, or a loose powe r socket. z An electric shock or fire may re sult. Do not plug many prod ucts into the sam e power socket . z Otherwis e, the socket may overheat and cause a fire. Do not touc h the power p lug with wet ha nds. z Otherwis e, an ele[...]

7 Before Using the Product Before Using the Product Caution Installation Warning Do not unplug the power cord when the prod uct is in use. z The product may become damage d by an electric sho ck. Do not use the po wer cord for prod ucts other than a uthorized produc ts supplied by Samsung. z An electric shock or fire may re sult. Keep the po wer so[...]

8 Before Using the Product Before Using the Product Caution Do not install t he product on an unstab le or vibrating surface (insec ure shelf, sloped surfa ce, etc.). z The product m ay fall and break o r cause a pers onal injury. z Using the produ ct in an area w ith excess vibration m ay damage the product or cause a fire. Do not install th e pro[...]

9 Before Using the Product Before Using the Product Operation Warning Put down the p roduct carefully. z The product m ay fall and break o r cause a pers onal injury. Installing the product in an unusual place (a place expose d to a lot of fine particles, chemical sub stances or extreme tempe ratures, or an airport or train station whe re the produ[...]

10 Before Using the Product Before Using the Product During a light ning or thunde rstorm, power o ff the product and remove the po wer cable. z An electric shock or fire may re sult. Do not drop objects on the pr oduct or apply impact. z An electric shock or fire may re sult. Do not move the pr oduct by pulli ng the powe r cord or any cable . z Ot[...]

11 Before Using the Product Before Using the Product Caution Leaving the screen fixed on a stationary image for an extend ed period of t ime may cause a fterimage bu rn-in or defe ctive pixels. z If you are no t going to u se the produ ct for an exte nded period o f time, activate power-saving mode or a moving-pi cture screen saver. Disconnect the [...]

12 Before Using the Product Before Using the Product Do not hold the monitor up side-down or m ove it by h olding the s tand. z The product m ay fall and break o r cause a pers onal injury. Do not use humidifi ers or stoves ar ound the pr oduct. z An electric shock or fire may re sult. Rest your eye s for more t han 5 minutes for every 1 h our of p[...]

13 Before Using the Product Before Using the Product Correct posture to use the product Use the product in the correct post ure as follows: z Straighten your back. z Allow a distance of 45 to 50c m between you r eye and the screen, and loo k slightly downward at the screen. Keep your eyes directly in front of th e screen. z Adjust the angle so ligh[...]

Table Of Cont ents 14 Table Of Contents BEFORE USING THE PRODUCT 2 Copyright 2 Icons used in this manual 2 Symbols for safety precautions 4 Cleaning 4 Cleaning 5 Securing the Installation Space 5 Precautions for storage 5 Safety Precautions 5 Electricity and Safety 7 Installation 9O p e r a t i o n 13 Correct posture to use the product PREPARATIONS[...]

Table Of Contents Table Of Cont ents 15 CONNECTING AND USING A SOURCE DEVICE 31 Before Connecting 31 Pre-connection Checkpoints 31 Connecting the Power 32 Connecting and Using a PC 32 Connecting to a PC 33 Driver Installation 34 Setting Optimum Resolution 34 Changing the Resolution Using a PC 36 Connecting to a Video Device 36 Connection Using the [...]

Table Of Contents Table Of Cont ents 16 45 Blue 45 Configuring Blue 45 Color Tone 46 Configuring the Color Tone Settings 47 Gamma 47 Configuring Gamma RESIZING OR RELOCATING THE SCREEN 48 Size 48 Changing the Image Size 49 H-Position 49 Configuring H-Position 49 V-Position 49 Configuring V-Position 50 Menu H-Position 50 Configuring Menu H-Position [...]

Table Of Contents Table Of Cont ents 17 60 Display Time 60 Configuring Display Time 61 Key Repeat Time 61 Configuring Key Repeat Time 62 Customized Key 62 Configuring Customized Key 62 Off Timer On/Off 62 Configuring Off Timer On/Off 63 Off Timer Setting 63 Configuring Off Timer Setting 64 Reset 64 Initializing Settings ( Reset ) INFORMATION MENU A[...]

Table Of Contents Table Of Cont ents 18 APPENDIX 79 Contact SAMSUNG WORLDWIDE 84 Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only 85 Terminology INDEX[...]

19 1 Preparations 1 Preparations 1.1 Checking the Contents 1.1.1 Removing the Packaging 1 Open the packaging b ox. Be careful not to dam age the product whe n you open the packa ging with a sharp instrum ent. 2 Remove the Styr ofoam from the produc t. 3 Check the com ponents and remove the Styrofoam and plastic bag. z The appearance of actual compo[...]

20 Preparations 1 1 Preparations 1.1.2 Checking the Components z Contact the dealer from whom you purch ased the product if any item is missing. z The appearance of the components and items sold separately may differ from the image shown. Components z Components may differ in different locations. z The cleaning cloth is only supplied with the black[...]

21 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Frontal Buttons The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z If the MENU button is not visible, lightly tap th e area around the [ ] button. The MENU button will become visible. z The onscreen display menu only a[...]

22 Preparations 1 1 Preparations Icons Description z Open or cl ose the onscr een displa y (OSD) menu , or retu rn to th e last menu. z OSD control loc k: Maintain the current s ettings, or loc k the OSD control to p revent uninten ded change s to settings. To lock th e OSD control, press the MENU button [ ] for five seconds. To unlock the locked O[...]

23 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 1.2.3 Tidying Up the Connected Cables Tidy up the c ables using t he cable holde r on the ba ck of the stan d. Port Descriptio n Connects to a source device using an [...]

24 Preparations 1 1 Preparations The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. 1.2.4 Kensington Lock An anti-theft lo ck allows you to us e the product sec urely even in pub lic places. The locking d evice shape an d locking m ethod depe nd on the man ufacturer. R[...]

25 Preparations 1 1 Preparations 1.2.5 Adjusting the Product Tilt The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. z You can adjust the tilt of your monitor. z Hold the lower part of the product and adjust the tilt carefully. 20°[...]

26 2 3D 2 3D This feature allows you to view 3D content suc h as 3D movies. You can view 3D content using (SyncMaster-dedicated) Samsung 3D glasses. 2.1 3D z You can purchase "SyncMaster-dedicated 3D glasses (model name: SSG-M3750CR)" separately. Contact the dealer you purchased the product from for details about purchasing the 3D glasses[...]

27 3D 2 2 3D Configuring the 3D Mode 1 Press [ ] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the pr oduct. 3 Press [ ] to move to 3D and press [ ] on the product. 4 Press [ ] to move to 3D Mode and press [ ] on the product. The following scre en will appear. z Off : Disable the 3D Mode function. z 2D 3D : Converts a normal video[...]

28 3D 2 2 3D 4 Press [ ] to move to L/R Change and pres s [ ] on the produc t. The following screen will appear. z L/R Image z R/L Image 5 Press [ ] to move to the opti on you want and press the [ ]. 6 The selected op tion will be applie d. 2.1.3 3D 2D Activates 2D screen mode. This function is turned off when 3D is 2D 3D or Off . Configuring the 3[...]

29 3D 2 2 3D 2.2 Standard HDMI-Compatible Formats The 3D formats indicated below are recommended by the HDMI association and must be supported. 2.3 Resolution Supported for PC Input (via the HDMI Port) PC input is optimized for video in 1920x1080 resolution. If the resolu tion is not 1920 x 1080, the 3D picture is not properly displayed and you can[...]

30 3D 2 2 3D z If the 3D glasses do not turn On even though 3D screen displays when playing a 3D game, press the 3D button to check that Frame Sequential is selected for 3D Mode . Depending on the graphics card, Frame Sequential might not be selected automatically when playing a 3D game. z Refer to "Online Help" for PC system requirements[...]

31 3 Connecting and Us ing a Source Device 3 Connecting and Using a Source Device 3.1 Before Connecting 3.1.1 Pre-connection Checkpoints z Before connectin g a source devic e, read the user manual pro vided with it. The number and locations of ports on source device s may differ from device to dev ice. z Do not connec t the power cable until all co[...]

32 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.3 Connecting and Using a PC 3.3.1 Connecting to a PC z Do not conne ct the power cable befor e connectin g all other cable s. Ensure you conne ct a source device first be fore connecting the po wer cable. z Select a connection m ethod suitab le for your PC. Connecti[...]

33 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Connection Using an DP Cable (Digital Type) 1 Connect the D P cable to th e DP port on the back of the product an d the DP port on the PC. 2 Connect the D C power ad apter to th e product and a power so cket, and tur n on the po wer switch on the PC. Be sure to connec[...]

34 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.3.3 Setting Optimum Resolution An information message abou t setting optimum resolution will appear if you power on the product for the first time after purchase. Select a langua ge and chan ge the resolu tion to the op timum value. 1 Press [ ] to move to the langua[...]

35 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device Changing the Resolution on Windows Vista Go to Control P anel Personalization Display Se ttings and chan ge the resolution. Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolu tion and change the r esolut ion. → → 12 34 *********** ****[...]

36 Connecting and Using a Source Device 3 3 Connecting and Us ing a Source Device 3.4 Connecting to a Video Device z Do not conne ct the power cable befor e connectin g all other cable s. Ensure you conne ct a source device first be fore connecting the po wer cable. z The product can be connec ted to a video devic e. Connecting parts may differ in [...]

37 4 Screen Setup 4 Screen Setup Configure the screen settings such as brightness and color tone. 4.1 MAGIC This feature pro vides the viewing an gle, brightness, and t int to suit your preferences. 4.1.1 SAMSUNG MAGIC Angle Angle allows yo u to conf igure the se ttings to obt ain the opt imum pictu re quality a ccording to your viewing angle. You [...]

38 Screen Setup 4 4 Screen Setup z Lean Back Mode 2 : Select t his option to vie w from a plac e lower tha n Lean Back M ode 1 mode. z Standing Mode : Select this option to view from a plac e higher th an the produc t. z Side Mode : Select this option to view fr om either side of the prod uct. z Group View : Sele ct this optio n for more than one v[...]

39 Screen Setup 4 4 Screen Setup z Dynamic Cont rast : Obtain balanced bright ness through automatic co ntrast adjustm ent. In AV mode z Dynamic : This mode is suit able when t he ambient ligh t is bright. z Standard : This mode is generally suitab le for any environment. z Movie : This mode reduces eye fatigue. z Custom : Customize the contrast an[...]

40 Screen Setup 4 4 Screen Setup z Demo : Compare normal s creen mode with Color mode. z Full : Obtain a vivid pict ure quality for all are as including the fles h colors in the pic ture. z Intelligent : Improve t he chroma for all a reas except the flesh colors in the pict ure. 5 Press [ ] to move to the opti on you want and press the [ ]. 6 The s[...]

41 Screen Setup 4 4 Screen Setup 4.3.1 Configuring Contrast 1 Press [ ] on the product. 2 Press [ ] to move to PICTURE and press [ ] on the pr oduct. 3 Press [ ] to move to Contrast and press [ ] on the product. Th e following screen will appear. 4 Adjust the Contrast using the [ ] button. 4.4 Sharpness Make the ou tline of objects more clear o r b[...]

42 Screen Setup 4 4 Screen Setup 4.5 Response Time Accelerate th e panel response rate to make video appe ar more vivid and natura l. z It is best to set Response Time to Normal or Faster when you are not viewing a movie. z The functions available on the monitor may vary depending on the model. Refer to the actual product. 4.5.1 Configuring Respons[...]

43 Screen Setup 4 4 Screen Setup 3 Press [ ] to move to HDMI Black Level and press [ ] on the produ ct. The follow ing screen w ill appear. z Normal : Select this mode when th ere is no con trast ratio degradation. z Low : Select this mode to reduce the black leve l and increase th e white level when there is a contrast ratio de gradation. 4 Press [...]

44 5 Configuring Tint 5 Configuring Tint Adjust the tint of the screen. This option is not available when Bright is set to Cinema or Dynamic Contrast mode. 5.1 Red Adjust the valu e of the colo r red in the p icture. (Range : 0~100) A higher value wil l increase the in tensity of the c olor. This option is not available when Color is in Full or Int[...]

45 Configuring Tint 5 5 Configuring Tint 3 Press [ ] to move to Green and press [ ] on the product. Th e following screen will appea r. 4 Adjust the Green us ing the [ ] bu tton. 5.3 Blue Adjust the valu e of the colo r blue in the p icture. (Ran ge: 0~100) A higher value wil l increase the in tensity of the c olor. This option is not available whe[...]

46 Configuring Tint 5 5 Configuring Tint z This option is not available when Angle is enabled. z This option is not available when Color is in Full or Intelligent mode. 5.4.1 Configuring the Color Tone Settings 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on th e product. 3 Press [ ] to move to Color Tone and press [ ] on [...]

47 Configuring Tint 5 5 Configuring Tint 5.5 Gamma Adjust the mid-ra nge brigh tness (Gamma) of the pict ure. This option is not available when Angle is enabled. 5.5.1 Configuring Gamma 1 Press [ ] on the product. 2 Press [ ] to move to COLOR and press [ ] on th e product. 3 Press [ ] to move to Gamma and press [ ] on th e product. Th e following s[...]

48 6 Resizing or Relocating the Screen 6 Resizing or Relocating the Screen 6.1 Size Change the pi cture size. 6.1.1 Changing the Image Size 1 Press [ ] on the produ ct. 2 Press [ ] to move to SIZE&POSITION and press [ ] on the prod uct. 3 Press [ ] to move to Image Size and press [ ] on the product. The following sc reen will appea r. In PC mod[...]

49 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 6.2 H-Position Move the screen to the left or ri ght. Available only when Size is set to Screen Fit . 6.2.1 Configuring H-Position 1 Press [ ] on the produ ct. 2 Press [ ] to move to SIZE&POSITION and press [ ] on the prod uct. 3 Press [ ] to move to H-Position and p res[...]

50 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 3 Press [ ] to move to V-Position and press [ ] on the product . The following scr een will appear. 4 Adjust the V-Po sition usin g the [ ] button. 6.4 Menu H-Position Move the menu posit ion to the left or right. 6.4.1 Configuring Me nu H-Position 1 Press [ ] on the produ c[...]

51 Resizing or Relocating the Screen 6 6 Resizing or Relocating the Screen 6.5.1 Configuring Menu V-Position 1 Press [ ] on the produ ct. 2 Press [ ] to move to SIZE&POSITION and press [ ] on the prod uct. 3 Press [ ] to move to Menu V-Position and press [ ] on the product. The fo llowing screen will appear. 4 Adjust the Menu V-Position using t[...]

52 7 Setup and Reset 7 Setup and Reset 7.1 ECO Adjust the pow er consumpt ion of the p roduct to save energy. 7.1.1 Eco Motion Sensor The Eco Motion Sensor activates to sa ve power when it does not detect any movement w ithin a specified ar ea for a specified period of time. Configuring the Ec o Motion Sensor 1 Press [ ] on the produ ct. 2 Press [ [...]

53 Setup and Reset 7 7 Setup and Reset Configuring Backlight 1 Press [ ] on the produ ct. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to ECO and pre ss [ ] on the product. 4 Press [ ] to move to Backlight and press [ ] on the product. The following screen will appear. z Off : Turn off the screen an d act[...]

54 Setup and Reset 7 7 Setup and Reset 4 Press [ ] to move to Eco Light Sensor and press [ ] on the product. Th e following scre en will appear. z Off z On : The Eco sensor detects the am bient illumination and automatica lly controls th e brightness. 5 Press [ ] to move to the opti on you want and press the [ ]. 6 The selected op tion will be appl[...]

55 Setup and Reset 7 7 Setup and Reset 3 Press [ ] to move to ECO and pre ss [ ] on the product. 4 Press [ ] to move to Brightn ess Level and press [ ] on the product . The following screen will appear. z Brighter : Increase t he current b rightness of th e screen. z Current : Maintain the curr ent bright ness of the screen . z Dimmer : Decrease th[...]

56 Setup and Reset 7 7 Setup and Reset 6 The selected op tion will be applie d. z This option is not available when Bright is in Dynamic Contrast mode. z This option is not available when Eco Light Sensor is enabled. 7.1.4 Eco Icon Display Configuring the Eco Icon Display Settings 1 Press [ ] on the produ ct. 2 Press [ ] to move to SETUP&RESET [...]

57 Setup and Reset 7 7 Setup and Reset z When the scr een becomes brighte r as the amb ient light become s brighter and the Eco Light Sensor activates, the brightness slid e bar level will increase with a sun image displayed above the bar. Wh en the screen becomes da rker, the brightness slide bar level will decrease w ith a moon imag e displayed a[...]

58 Setup and Reset 7 7 Setup and Reset z The progres s of a tree growing will be represented as 10 differen t images (stages). After one full-grown tre e is complete, th e initial image wi ll be restored and the number of trees will continue to acc umulate. The number for en ergy trees will be ro unded to one de cimal place. 7.2 Menu Transparency S[...]

59 Setup and Reset 7 7 Setup and Reset 3 Press [ ] to move to Language and press [ ] on th e product. The following sc reen will appea r. 4 Press [ ] to move to the opti on you want and press the [ ]. 5 The selected op tion will be applie d. 7.4 PC/AV Mode Set PC / AV Mode to AV . The picture size will be enlarged. This option is useful wh en you v[...]

60 Setup and Reset 7 7 Setup and Reset 7.5 Auto Source Activate Auto Source . 7.5.1 Configuring Auto Source 1 Press [ ] on the produ ct. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to Auto Source and pre ss [ ] on the prod uct. The following screen will appear. z Auto : The input sourc e is automatically[...]

61 Setup and Reset 7 7 Setup and Reset 3 Press [ ] to move to Display Time and press [ ] on the prod uct. The following screen will appear. 4 Press [ ] to move to the opti on you want and press the [ ]. 5 The selected op tion will be applie d. 7.7 Key Repeat Time Control the response ra te of a butto n when the b utton is press ed. 7.7.1 Configurin[...]

62 Setup and Reset 7 7 Setup and Reset 7.8 Customized Key By configuring Customized Key to suit yo ur preferen ces, you can c hange the sc reen settings m ore conveniently. 7.8.1 Configuring Customized Key 1 Press [ ] on the produ ct. 2 Press [ ] to move to SETUP&RESET and press [ ] on the product. 3 Press [ ] to move to Customized Key and pres[...]

63 Setup and Reset 7 7 Setup and Reset 3 Press [ ] to move to Off Timer On/Off and press [ ] on the product. The fol lowing screen wi ll appear. z Off : Deactivate the off time r so that the product do es not powe r off automa tically. z On : Activate the off tim er so that th e product p owers off au tomatically. 4 Press [ ] to move to the opti on[...]

64 Setup and Reset 7 7 Setup and Reset you do not want the timer to activate, g o to MENU SETUP&RE SET and set Off Timer On / Off to Off . 7.11 Reset Return all the sett ings for the produ ct to the defau lt factory settings. 7.11.1 Initializing Settings (Reset) 1 Press [ ] on the produ ct. 2 Press [ ] to move to SETUP&RESET and press [ ] o[...]

65 8 INFORMATION Menu a nd Others 8 INFORMATION Menu and Others 8.1 INFORMATION View the current i nput sour ce, freq uency and r esolutio n. 8.1.1 Displaying INFORMATION 1 Press [ ] on the product. 2 Press [ ] to move to INFORMATION . The cu rrent i nput source , freque ncy and reso lution w ill appear. 8.2 Configuring Brightness in the Startup Sc[...]

66 INFORMATION Menu and Others 8 8 INFORMATION Menu a nd Others 1 Press [ ] in the startup screen. The following screen will appear. 2 Adjust the Volu me using the [ ] button. V olume 50  Exit Enter Adjust[...]

67 9 Troubleshooting Guide 9 Troubleshooting Guide 9.1 Requirements Before Contacting Samsung Customer Service Center 9.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is oper ating normally by using the pr[...]

68 Troubleshooting Guide 9 9 Troubleshooting Guide " Not Optimum Mode " is displayed. This message appears if the signal from th e graphics car d exceeds t he maximum reso lution or frequency fo r the produ ct. Change the maximu m resolution and freque ncy to suit the produ ct performanc e, referring t o Standard Si gnal Mode T able (page[...]

69 Troubleshooting Guide 9 9 Troubleshooting Guide The volume is too low. Adjust the volume. If the volume is still low af ter turning it up to the maximum level, a djust th e volume on your PC sound card or software program. Source device issu e A beeping sound is heard when my PC is booting. If a beeping sound is heard when your PC is booting, ha[...]

70 Troubleshooting Guide 9 9 Troubleshooting Guide 9.2 Q & A Question Answer How can I change the frequency? Set the frequ ency on your graphics car d. z Windows XP: Selec t Control Panel Appearance and Themes Display S ettings A dvanced Monito r , and adjust Refres h rate under Monitor settings . z Windows ME/2000: Select Control Panel Displa [...]

71 Troubleshooting Guide 9 9 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment. How can I change the resolution? z Windows XP : Go to Con trol Panel Appearance and Themes Display Settings and adjust the resolut ion. z Windows ME/2000: Go to Control Panel Display Settings and adjust th[...]

72 10 Specifications 10 Specifications 10.1 General Model Name S23A750D S27A750D Panel Size 23.0 inches / 58cm 27.0 inches / 68cm Display area 509.76 mm (H) x 286.74 mm (V) 20.1 inches (H) x 11.3 inches (V) 597.6 mm (H) x 336.15 mm (V) 23.5 inches (H) x 13.2 inches (V) Synchroni zation Horizontal Frequency 30 kHz ~ 140 kHz Vertical Frequency (DP)10[...]

73 Specifications 10 10 Specifications The above specifications are subject to change without notice to improve quality. This device is a Class B digital apparatus. 10.2 PowerSaver The power-sa ving function of this produ ct reduces p ower consum ption by switch ing off the scree n and changing the co lor of the power LED if the produc t is not use[...]

74 Specifications 10 10 Specifications z The displayed power consumption level can vary in different oper ating conditions or when settings are changed. z To reduce the power consumption to 0 watts, turn off the power switch on the back of the product or disconnect the power cable. Be sure to disconn ect the power cable when you will not be using t[...]

75 Specifications 10 10 Specifications 10.3 Standard Signal Mode Table This product can be set to only one res olution for each screen size to obtain the optimum picture quality due to the nature of the panel. Therefore, a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you selec[...]

76 Specifications 10 10 Specifications HDMI Resolution Horizontal Frequen cy (kHz) Vertical Frequenc y (Hz) Pixel Clo ck (MHz) Sync Polarity (H/ V) Normal 1920 x 1080 60HZ 67.500 60.000 148.500 + / + 640 x 480 60Hz,480p 31. 470 59.940 25.180 - / - 720 x 480 60Hz,480p 31. 470 59.940 27.000 + / + 720 x 576 50Hz, 576p 31.250 50.000 27.00 0 + / + 1280 [...]

77 Specifications 10 10 Specifications z Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. 3D 1920 x 1080,1080p 24Hz, FramePacking 54.000 24.000 1[...]

78 Specifications 10 10 Specifications z Vertical Frequency Repeating the same picture dozens of times per second allows you to view natural pictures. The repeat frequency is called "vertical frequency" or "refresh rate" and is indicated in Hz.[...]

79 Appendix Appendix Contact SAMSUNG WORLDWIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726 -7864) http://www.sam sung.com CANADA 1-800-SAMSUNG (7 26-7864) http://www. samsung.com/ca http://www. samsung.com /ch_fr (French) MEXICO 01-800-S[...]

80 Appendix Appendix EUROPE ALBANIA 42 27 5755 http://www. samsung.com AUSTRIA 0810 - SAMSUNG (7267864, € 0.07/min ) http://www. samsung.com BELGIUM 02-201-24-18 http://www.sam sung.com/be (Dutch) http://www. samsung.com /be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsun g.com CROATIA 062 SAMSUNG (0 6[...]

81 Appendix Appendix PORTUGAL 808 20 - SAMSUNG (808 20 7267) http://www. samsung.com RUMANIA From landlin e : 08010-SAMSUNG (7267864) From landline & mobile : (+40) 21 206 01 10 http://www. samsung.com SERBIA 0700 Samsung (0700 726 7864 ) http ://www.samsu ng.com SLOVAKIA 0800 - SAMSUNG (0800-726 786) http://www. samsung.com SPAIN 902 - 1 - SAM[...]

82 Appendix Appendix UKRAINE 0-800-502-00 0 http://www.sam sung.com/ua http://www. samsung.com / ua_ru BELARUS 810-800-500-55-50 0 http://www.sam sung.com MOLDOVA 00-800-500-55-500 http://www.sa msung.com ASIA PACIFIC AUSTRALIA 1300 36 2 603 http://www.sam sung.com NEW ZEALAND 0800 SAMSUNG (0800 726 786) http://www.samsung.com CHINA 400-810-5858 ht[...]

83 Appendix Appendix MIDDlE EAST IRAN 021-8255 http:/ /www.samsung.co m OMAN 800-SAMSUNG (726-7864) http://www.samsung.com KUWAIT 183-2255 http://www.sam sung.com BAHRAIN 8000- 4726 http://www.samsung .com EGYPT 08000-726786 http://www.samsung.com JORDAN 800-22273 http://www. samsung.com MOROCCO 080 100 2255 http://www.samsung.com SAUDI ARABIA 9200[...]

84 Appendix Appendix Correct Disposal of This Product (Waste Electrical & Electronic Equipment) - Europe only (Applicable in the European Union and other European coun tries wit h separate collection systems) This marking on the product, accessories or liter ature indicates that the produ ct and its electronic accesso ries (e.g. charg er, heads[...]

85 Appendix Appendix Terminology OSD(On Screen Display) On screen display (O SD) allows you to config ure on-screen sett ings to optimize the pic ture quality as required. It allows you to ch ange the scr een brightne ss, tint, size and many othe r settings us ing menus displayed on the scr een. Gamma The Gamma menu adju sts the grey sc ale that re[...]

86 Appendix Appendix Resolution Resolution is the nu mber of horizonta l pixels and vertical p ixels that form a screen. It repre sents the level of display detail. A higher reso lution displa ys a greater amount of inf ormation on th e screen and is suitable for performing mult iple tasks at the same time. E.g. A resolution of 1920 x 1080 co nsist[...]

Index 87 Index Numerics 3D 26 3D Mode 26 A Adjusting the Prod uct Tilt and Height 25 Appendix 79 Auto Source 60 C Changing the Resolution Using a PC 34 Checking the R esolution and Frequ ency 67 Cleaning 4 Connecting He adphones 36 Connecting to a PC 32 Connecting to a Video Device 36 Connection Using t he HDMI Cable 36 Contact SAMSUNG WORLDWIDE 79[...]

Index Index 88 Testing the Produc t 67 Tidying Up the Co nnected Cables 23 V Volume 65[...]