-
Página 1
Install drivers SAMTRON 591S/58V/59E/78E/78DF/78BDF/98PDF[...]
-
Página 2
Failure to follow di rections noted by this symbol could resul t in bodily harm or damage to equipment. Prohibited Important to read and understa nd a t all times Do not disassemble Disconnect the plug from the outlet Do not touch Grounding to preve nt an electric shock Power When not used fo r extended perio d of time , set your computer to DPMS. [...]
-
Página 3
z This may cause an electric shock or fire. Do not pull the plug out by the wire nor touch the p lug with wet ha nds. z This may cause an electric shock or fire. Use only a pr op erly grou nded plug a nd recept acle. z An improper ground may cause el ect ric shock or equipment da mag e. Do not excessively ben d the plu g and wire nor place heavy ob[...]
-
Página 4
Do not drop the monitor w hen moving it. z This may cause d amage to the prod uct or human body. Place the monitor on a flat and stab le surface. z The monitor may cause injury by falling. Set down the monitor carefully. z The monitor could be da maged or broken. Do not place the monitor face down. z The CDT surfac e may be damage d. Do not use the[...]
-
Página 5
z You may buy a recommended detergent at any Servic e Ce nter. If the connector between the pl ug and the pin is d usty or dirty, cl ean it properly with a dry clo t h. z A dirty connector may cause an electric shock or fire. Do not set a glass of water, chemical s or any small metal objects on the monitor. z This may cause d amage, electric shock [...]
-
Página 6
Do not use or st ore inflammable sub stances near the moni tor. z This may cause an explosion o r fire. Do not try to move the moni tor by pull ing only the wire or the si gnal cable. z This may cause a breakdown, elec tri c shock or fire due to damage to the cable. Do not move the monitor right or left by pulling o nly the wire or the signal cable[...]
-
Página 7
Please make su re the followi ng items are in cluded with your mon itor. If an y items are missin g , contact y our deale r . Unpacking Monitor Manual Quick Setup Gu ide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driver Cable Power Cord SAMTRON 591S/58V/59E[...]
-
Página 8
Stand Stand For Multimedia model (Option) Manual User Guide Cable Sound Cables ( 2each ) DC Power Cord Stand Multimedia S p eaker Stand Front[...]
-
Página 9
Menu button [ ] Opens the OSD menu. Also used to exit th e OSD menu or return to the previous menu. Adjust buttons [ ] These buttons allow you to high lig ht and adjust items in the menu. Enter button [ ] Used to select the OSD menu. Power button Use this button for turn the monitor on and off. Power indicator This ligh t glows green during normal [...]
-
Página 10
(The configu ration at the b ack of the moni tor may vary from pro duct to product.) Power port Connect the power cord for your monitor to the power p ort on the back o f the moni tor. Signal Cable Connect the signal cable to the video port on your comput er, video board, video card, or graphi cs c ard. See Connecting the Mon it or for further info[...]
-
Página 11
Please make su re the followi ng items are in cluded with your mon itor. If an y items are missin g , contact y our deale r . Unpacking Monitor Manual Quick Setup Gu ide Warranty Car d (Not available in al l locations) User's Guide, Monitor Driver Cable Power Cord SAMTRON 78E/78DF/78BDF/98PDF[...]
-
Página 12
Stand Stand For Multimedia model (Option) Manual User Guide Cable Sound Cables ( 2each ) DC Power Cord Stand Multimedia S p eaker Stand Front[...]
-
Página 13
Menu button [ ] Opens the OSD menu. Also used to exit th e OSD menu or return to the previous menu. Adjust buttons [ ] These buttons allow you to high lig ht and adjust items in the menu. Enter button [ ] Used to select the OSD menu. Power button Use this button for turn the monitor on and off. Power indicator This ligh t glows green during normal [...]
-
Página 14
Signal Cable Connect the signal cable to the video port on your comput er, video board, video card, or graphi cs c ard. See Connecting the Mon it or for further information re garding cable connections. Bottom Signal Cable Co nnect the sig nal cable to th e video port on your computer, video board, video card, or graphi cs c ard. Power port Connect[...]
-
Página 15
Setup-For Multimedia mo del | Multimedia Spe ake r Stand 1. Connect the power cord for your monitor to the power port on t he back of the m onitor. Plug the power cord fo r the monitor into a nearby outlet. 2-1. Connecting to a comput er Connect the signal cable to the 15-pin , D-sub connector on the back of your moni tor. 2-2. Connecting to a new [...]
-
Página 16
1. Turn off your computer and unplu g the power cord. 2. Connect the end of the signal cable t o your compute r's video port(vid eo board, vi deo card or graphics card). 3. Connect one end of the other sou nd cable to the Mic Input jack on your sou nd card or computer.Connect the other en d of this ca bl e to the Mic By-pass ja ck on the back [...]
-
Página 17
5. On/Off Volume Turns On/Off and adjusts the output volume. 6. Treble Con trol Use to control high frequencies. 7. Bass Control Use to control low frequenc ies. 8. Mic Inp ut Ja ck To transmit your voice,connect a microphone to this jack. 9. Headphone Jack To listen in privacy,connec t headphones here . 10. Detachable Stand T op Tilt/Swi ve l Ba s[...]
-
Página 18
Remove the twist-tie before atta ching the base to the monitor. Attaching the B ase 1. Place the monitor upside-dow n on a flat work surface. 2. Align the tabs on the base with the correspo nding slots on the bottom of the mo nitor. 3. Press the base onto the monitor un til the tabs are fully engaged in the slot s. 4. Push the base toward the fron [...]
-
Página 19
1. Insert CD into the CD-ROM driver. 2. Click "Windows XP/2000 Dri ver" . 3. Choose your monitor mode l in the mode l list, then cl ick the "OK" butt on. 4. Click the " Install " button in the " Warning " window. 5. If you can see following "Mess age" window, then click the "Continue Anyw ay &q[...]
-
Página 20
3. Click " Display " icon and choose the " Settings " tab then click " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and select " Drive r " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " [...]
-
Página 21
7. Click the " Browse " button then choo se A:(D:Driver) a nd choose your monitor model in the model list and cli ck the " Next " button. 8. If you can see following " Me ssage " window, then click the " Continue Anyway " button. The n click " OK " button. This monitor d river is unde r certified M[...]
-
Página 22
10. Monitor d river installatio n is comple ted. Microsoft ® Window s ® 2000 Operating System When you can see "D ig ital Signat ur e Not Found" on your monitor, follow these step s. 1. Choose " OK " button on the " Insert disk " w indow. 2. Click the " Browse " button on the " File Needed " windo[...]
-
Página 23
9. Enter the model n ame of your mo ni tor . This information will not af fec t the a c tu al execution of X-Window . 10. You have fin ished setting up your monitor. Execute X-Window after se tting other requested hardwa re.[...]
-
Página 24
Setup-For Multimedia mo del | Multimedia Spe ake r Stand 1. Connect the power cord for your monitor to the power port on t he back of the m onitor. Plug the power cord fo r the monitor into a nearby outlet. 2-1. Connecting to a comput er Connect the signal cable to the 15-pin , D-sub connector on the back of your moni tor. 2-2. Connecting to a new [...]
-
Página 25
1. Turn off your computer and unplu g the power cord. 2. Connect the end of the signal cable t o your compute r's video port(vid eo board, vi deo card or graphics card). 3. Connect one end of the other sou nd cable to the Mic Input jack on your sou nd card or computer.Connect the other en d of this ca bl e to the Mic By-pass ja ck on the back [...]
-
Página 26
5. On/Off Volume Turns On/Off and adjusts the output volume. 6. Treble Con trol Use to control high frequencies. 7. Bass Control Use to control low frequenc ies. 8. Mic Inp ut Ja ck To transmit your voice,connect a microphone to this jack. 9. Headphone Jack To listen in privacy,connec t headphones here . 10. Detachable Stand T op Tilt/Swi ve l Ba s[...]
-
Página 27
Remove the twist-tie before atta ching the base to the monitor. Attaching the B ase 1. Place the monitor upside-dow n on a flat work surface. 2. Align the tabs on the base with the correspo nding slots on the bottom of the mo nitor. 3. Press the base onto the monitor un til the tabs are fully engaged in the slot s. 4. Push the base toward the fron [...]
-
Página 28
1. Insert CD into the CD-ROM driver. 2. Click "Windows XP/2000 Dri ver" . 3. Choose your monitor mode l in the mode l list, then cl ick the "OK" butt on. 4. Click the " Install " button in the " Warning " window. 5. If you can see following "Mess age" window, then click the "Continue Anyw ay &q[...]
-
Página 29
3. Click " Display " icon and choose the " Settings " tab then click " Advanced.. ". 4. Click the " Properties " button on the " Monitor " tab and select " Drive r " tab. 5. Click " Update Driver.. " and select " Install from a list or.. " then click " Next " [...]
-
Página 30
7. Click the " Browse " button then choo se A:(D:Driver) a nd choose your monitor model in the model list and cli ck the " Next " button. 8. If you can see following " Me ssage " window, then click the " Continue Anyway " button. The n click " OK " button. This monitor d river is unde r certified M[...]
-
Página 31
10. Monitor d river installatio n is comple ted. Microsoft ® Window s ® 2000 Operating System When you can see "D ig ital Signat ur e Not Found" on your monitor, follow these step s. 1. Choose " OK " button on the " Insert disk " w indow. 2. Click the " Browse " button on the " File Needed " windo[...]
-
Página 32
9. Enter the model n ame of your mo ni tor . This information will not af fec t the a c tu al execution of X-Window . 10. You have fin ished setting up your monitor. Execute X-Window after se tting other requested hardwa re.[...]
-
Página 33
1. Opens the OSD me nu. Also use to exit the OSD me nu or return to the previous menu. 2. These buttons allow you to high lig ht and adjust items in the menu. 3. Use to select the OSD menu. Brightness SAMTRON 591S/58V/59E[...]
-
Página 34
Contrast[...]
-
Página 35
OSD Description Play/stop Adjust the Brightness. Adjust the Contrast. A "Moiré" pattern can appear on your screen, loo king like a series of concentric circles or arcs. To elimin ate this patte rn, use the horizontal moire adjustme nt s. A "Moirë" pattern can appear on your screen, loo king like a series of concentric circles [...]
-
Página 36
Color temperature is a measure of th e ' warmth' of the image colors. (6500K / 9300K) Use to adjust the monitor color se tting.(Red) Use to adjust the monitor color se tting.(Green) Use to adjust the monitor color se tting.(Blue) When you adjust the Brightness an d Contrast after sRGB mode is selected, sRGB mode exits. OSD Description Pla[...]
-
Página 37
You can see the frequency (user contro l mod e) used by the user, the polarity of the operat ion al signals, the default frequency (def aul t mode) set when you buy the mon itor an d th e resolution level. Note : These screens do not allow any cha nges to the settings, they are for information on ly.[...]
-
Página 38
1. Opens the OSD me nu. Also use to exit the OSD me nu or return to the previous menu. 2. These buttons allow you to high lig ht and adjust items in the menu. 3. Use to select the OSD menu. Brightness SAMTRON 78E/78DF/78BDF[...]
-
Página 39
Contrast[...]
-
Página 40
OSD Description Play/stop Adjust the Brightness. Adjust the Contrast. A "Moiré" pattern can appear on your screen, loo king like a series of concentric circles or arcs. To elimin ate this patte rn, use the horizontal moire adjustme nt s. A "Moirë" pattern can appear on your screen, loo king like a series of concentric circles [...]
-
Página 41
Color temperature is a measure of th e ' warmth' of the image colors. (6500K / 9300K) Use to adjust the monitor color se tting.(Red) Use to adjust the monitor color se tting.(Green) Use to adjust the monitor color se tting.(Blue) When you adjust the Brightness an d Contrast after sRGB mode is selected, sRGB mode exits. OSD Description Pla[...]
-
Página 42
You can see the frequency (user contro l mod e) used by the user, the polarity of the operat ion al signals, the default frequency (def aul t mode) set when you buy the mon itor an d th e resolution level. Note : These screens do not allow any cha nges to the settings, they are for information on ly.[...]
-
Página 43
1. Opens the OSD me nu. Also use to exit the OSD me nu or return to the previous menu. 2. These buttons allow you to high lig ht and adjust items in the menu. 3. Use to select the OSD menu. Brightness SAMTRON 98PDF[...]
-
Página 44
Contrast[...]
-
Página 45
OSD Description Play/stop Adjust the Brightness. Adjust the Contrast. A "Moiré" pattern can appear on your screen, loo king like a series of concentric circles or arcs. To elimin ate this patte rn, use the horizontal moire adjustme nt s. A "Moirë" pattern can appear on your screen, loo king like a series of concentric circles [...]
-
Página 46
Color temperature is a measure of th e 'warmth' of the ima ge colors. The available range is be twee n 5000 to 9300K. Use to adjust the monitor color se tting.(Red) Use to adjust the monitor color se tting.(Green) Use to adjust the monitor color se ttin g.(Blue) When you adjust the Brightness an d Contrast after sRGB mode is selected, sRG[...]
-
Página 47
You can see the frequency (user contro l mod e) used by the user, the polarity of the operat ion al signals, the default frequency (def aul t mode) set when you buy the mon itor an d th e resolution level. Note : These screens do not all ow an y changes to the setting s, the y are for information only .[...]
-
Página 48
Before calling for servic e, check the information in this section to see if you can remedy any problems yourself. If you do need assistance , please call th e phone number on th e Information section or contact your de al er . Symptom Check List Solutions No images on the screen. I cannot turn on the monitor. Is the pow er cord connecte d properly[...]
-
Página 49
speaker or a high voltage wire near by? Is the voltage stable? The screen image can ap pear to shake or vibrate at a particula r time of day due to low supply voltage. The screen image can also ap pear to shake or vibrate if there is a problem with the video card or the compu ter's main board . The screen shows strange colors or just black and[...]
-
Página 50
4. Check if the scanning ratio of the video scree n is set at 75Hz or 85Hz. (Do not exceed 60Hz whe n using the maximum resolution.) 5. If you have problems in installing the adapter (video) driver, boot the computer in Safe Mode, remove the Displa y Adapter at th e " Control Panel , System , Device A dministrator " an d the n reboot the [...]
-
Página 51
4. Turn off your monitor and reco nnect the video ca ble; then turn on both your computer and the monitor . If your monitor screen remains blank after using the previous procedure, check your vide o controller and computer system; your monitor is functioning properly. Warning Mess ages If there is something wrong with the inp ut sign al, th e messa[...]
-
Página 52
General General Model Name SAM T R O N 5 9 1S /58V/59E Picture Tub e Type 15"(38cm) DynaFlat (35cm view able) Deflection an gl e 90 ° Dot Pitch 0.24mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask. Multi-layer coated with anti-sta tic / Glare. Resolution Optimum resolution 8[...]
-
Página 53
90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 65W Dimensions (WxDxH ) 361 x 379.2 x 347mm (After instal lation of Stand ) Weight 11.0kg Environmen tal consider ations Operating Temperature: 32°F ~ 104°F(0°C ~ 40°C) Humidity: 10% ~ 80 %, non-condensing Storage Temperature: -4°F ~113 °F (-20°C ~ 45°C) Humidity: 5% ~ 95%, non-[...]
-
Página 54
Horizontal Frequency The time to sca n one lin e connecting the right edge to the left edge of the screen ho rizontally is c alled Horizontal Cycle and the inverse number of the Horizontal Cycle is ca lled Horizontal Frequ ency. Unit: kHz Vertical Frequency Like a fluorescen t lamp, the screen has to re peat the same image many times per second to [...]
-
Página 55
General General Model Name SAMTRON 78E Picture Tub e Type 17"(43cm) Full square type (40.6cm viewable) Deflection an gl e 90 ° Dot Pitch 0.23mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask. Multi-layer coated with anti-sta tic / Glare. Resolution Optimum resolution 1024 x 7[...]
-
Página 56
Power Supply 90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 75W Dimensions (WxDxH ) 401 x 410 x 378mm (After installation o f Stand) Weight 14.3kg Environmen tal consider ations Operating Temperature: 32°F ~ 104°F(0°C ~ 40°C) Humidity: 10% ~ 80 %, non-condensing Storage Temperature: -4°F ~113 °F (-20°C ~ 45°C) Humidity: 5% ~[...]
-
Página 57
Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.5 00 -/- VESA, 800 x 600 53.674 85.061 56.2 50 +/+ VESA, 1024 x 768 60.023 75.029 78.7 50 +/+ VESA, 1024 x 768 68.677 84.997 94.5 00 +/+ VESA, 1152 x 864 67.500 75.000 108 .000 +/+ Horizontal Frequency The time to[...]
-
Página 58
General General Model Name SAMTRON 78DF Picture Tub e Type 17"(43cm) DynaFlat (40. 6cm vie wable) Deflection an gl e 90 ° Dot Pitch 0.20mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask. Multi-layer coated with anti-sta tic / Glare. Resolution Optimum resolution 1024 x 768 @ [...]
-
Página 59
Power Supply 90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 75W Dimensions (WxDxH ) 401 x 410 x 378mm (After installation o f Stand) Weight 14.3kg Environmen tal consider ations Operating Temperature: 32°F ~ 104°F(0°C ~ 40°C) Humidity: 10% ~ 80 %, non-condensing Storage Temperature: -4°F ~113 °F (-20°C ~ 45°C) Humidity: 5% ~[...]
-
Página 60
Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.5 00 -/- VESA, 800 x 600 53.674 85.061 56.2 50 +/+ VESA, 1024 x 768 60.023 75.029 78.7 50 +/+ VESA, 1024 x 768 68.677 84.997 94.5 00 +/+ VESA, 1152 x 864 67.500 75.000 108 .000 +/+ Horizontal Frequency The time to[...]
-
Página 61
General General Model Name SAMTRON 78BDF Picture Tub e Type 17"(43cm) DynaFlat (40. 6cm vie wable) Deflection an gl e 90 ° Dot Pitch 0.20mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask. Multi-layer coated with anti-sta tic / Glare. Resolution Optimum resolution 1024 x 768 @[...]
-
Página 62
90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 75W Dimensions (WxDxH ) 401 x 410 x 378mm (After installation o f Stand) Weight 14.3kg Environmen tal consider ations Operating Temperature: 32°F ~ 104°F(0°C ~ 40°C) Humidity: 10% ~ 80 %, non-condensing Storage Temperature: -4°F ~113 °F (-20°C ~ 45°C) Humidity: 5% ~ 95%, non-co [...]
-
Página 63
Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 1024 x 768 68.677 84.997 94.500 +/+ VESA, 1280 x 1024 79.976 75.025 135.00 +/+ Horizontal Frequency The time to sca n one lin e connecting the right edge to the left edge of the screen ho rizontally [...]
-
Página 64
General General Model Name SAMTRON 98PDF Picture Tub e Type 19"(48cm) DynaFlat (45. 8cm vie wable) Deflection an gl e 90 ° Dot Pitch 0.20mm (Horizontal) Screen type Aluminized tri-color phosphor do t trio wi th black matrix. Anti-doming invar shadow mask. Multi-layer coated with anti-sta tic / Glare. Resolution Optimum resolution 1280 x 1024 [...]
-
Página 65
90 ~ 264VAC rms, 60/50 Hz ± 3H z Power Consumptio n Less than 110 W Dimensions (WxDxH ) 445 x 457.5 x 416mm (After instal lation of Stand ) Weight 18.2kg Environmen tal consider ations Operating Temperature: 32°F ~ 104°F(0°C ~ 40°C) Humidity: 10% ~ 80 %, non-condensing Storage Temperature: -4°F ~113 °F (-20°C ~ 45°C) Humidity: 5% ~ 95%, no[...]
-
Página 66
Display Mode Horizontal Frequenc y (kHz) Vertical Frequenc y (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA, 640 x 480 37.500 75.000 31.500 -/- VESA, 1024 x 768 68.677 84.997 94.500 +/+ VESA, 1280 x 1024 91.146 85.024 157.50 +/+ Horizontal Frequency The time to sca n one lin e connecting the right edge to the left edge of the screen ho rizontally [...]
-
Página 67
Service The address an d p hone number o f the com p an y can be chan g ed without p revious notice. SAMTRON CANADA SAMSUNG ELECTRONIC S CANADA INC. 7037 FINANCIAL DRIVE MISSISSAUGA, ONTARIO L5N 6R3 TEL : 1-800-726 -7864 FAX : 905-542-1199 SAMTRON EUROPE SAMSUNG ELECTR ONICS GM BH SAMSUNG-HAUS, AM KRONBERGER HANG 6 65824 SCHW ALBACH/TS ., GERMANY T[...]
-
Página 68
17TH, HAMACHO CENTER BLDG. 2-31-1, NIHONBASHI-HAMACHO, CHOU-KU, TOKYO 103, JAPAN TEL : (81-3) 5641-9860 FAX : (81-3) 564 1 -9861 SAMTRON U.S.A. SAMTRON COMPUTER PRODUCTS CUSTOMER SERVICE 400 Valley Road Suite 201, Mt. Arlin gton , NJ 07856 TEL : 973-601-6200, FAX : 973-601 -600 1 1-800-SAMTRON (1 -800-726-8766) Terms Dot Pitch The image on a monito[...]
-
Página 69
Samsung is the registered trademark of Samsung Elect ron ics Co ., Ltd.; Microsoft , Windows and Windows NT are registered trademarks of Microsoft Corporation; VESA , DPMS and DDC are registered trad emarks of Vide o Elec tro nics Standard Association; the ENERGY STAR name and logo are registered trademarks of the U.S. Enviro nmental Protection Age[...]
-
Página 70
FCC Information | IC Complia nce Noti ce | MPR II C ompliance | European Not ice (Europ e only) | PCT Notice | VCCI | TCO'95-Ecolo gical require ments for pers onal computers (TCO'95 appli ed model only) TCO'99-Ecolo gical require ments for pers onal computers (TCO'99 appli ed model only) TCO'03-Ecolo gical require ments fo[...]
-
Página 71
MPR II Compliance This monitor complies with SWEDAC(MPR II) recommendation s for reduced electric and magnetic fields. European Notice(Europe Only) Products with the CE Marking co mply with both the EMC Direct ive (89/336/EEC), (92/31/EEC), (93/68/EEC) and the Low Vol tage Directive (73/23/EEC) issu ed by the Commission of the European Commun ity. [...]
-
Página 72
the adaptation of goods and services to the environ m en t.The main problem as far as monitors and other electronic equi pment are concerned is that enviro nmentally harmful substa nce s are used both in the products and d uring their manu facture. Since it has not been possib le so far for the majority of electronic equipment to be recycled in a s[...]
-
Página 73
Mercury Mercury is sometimes found in batteries, relays and switches. Mercury damages the nervou s system and is toxic in high doses. z TCO'95 requirement states that batteri es may not contain more than 25 ppm (parts p er million) of mercury. It al so de man ds that no mercury is present in any of the electrical or electronics comp on en ts c[...]
-
Página 74
complete environmental criteria do cume nt may be ordered from: TCO Develop ment SE-114 94 Stockholm, Sweden Fax: +46 8 782 92 07 Email (Internet): development@tco.se Current information regard ing TCO'99 ap prove d and labelled pro ducts may also be obta ined via the Internet, using the address: http ://www.tco-info.com/ Environmen tal requir[...]
-
Página 75
Congratulations! The display you have just purchased carries t he TCO'03 Displ ays label. This means that your display is designed, manufactured an d tested a ccording to some of the strictest quality a nd environmental requirements in the world. This makes for a high performance produ c t, de si gn ed with the user in focus that also minimize[...]