Sanyo CE28DFN2-B manual

CE 28DFN2-B CE 32DFN2-B Please read this Instruction book before using your television. W e wish you many hours of pleasure from your new television. Colour T elevision INSTRUCTION MANUAL[...]

2 END-USER LICENCE & SAFETY END-USER LICENCE & SAFETY PRECAUTIONS PRECAUTIONS Do not allow anything to rest on the power cord. Do not locate this television receiver where the cord will be damaged by people walk- ing on it. Do not overload wall outlets and extension cords as this can result in fire or electric shock. Slots and openings in t[...]

3 Connect your aerial cable socket to the back of the TV set. Fit the aerial cable as shown below or as shown opposite when A V equipment is con- nected. Connect the power cord of the TV set to a wall outlet. ✐ The TV set is prepared for a mains voltage AC220~240V , 50Hz. When the TV set is not to be used for an extended period of time, it is adv[...]

4 Press the Mains on off switch on the front of the TV set. The self-automatic tuning system called Plug and Play will start. The TV scans the analogue channels first and then switches to digital channel mode and scans digital channels. This could take up to 15 minutes. During automatic tuning, the TV displays the tuning status of analogue and digi[...]

5 Screen mode selector T o select the screen mode, A UTO , NA TURAL, ZOOM14:9, TITLE IN 14:9, ZOOM 16:9, TITLE-IN 16:9, FULL or NORMAL. TV/A V switch T o switch from Digital TV , A V1, A V2 or A V3 mode press repeatedly . Direct programme selector For direct access to prog rammes using (0-9) numeric buttons f or example for channel 23, press 2 and [...]

6 The main menu screen takes you to many functions in the TV . The buttons below are the main buttons and their uses. MENU button - Enters and exits menus. Cursors e e and d d moves up and down in each selected menu. Cursor 7 7 changes levels, moves to the left and returns to previous menu. Cursor 8 8 changes levels, moves to the right and enters n[...]

7 ■ Remove a channel. 1. Highlight a channel to be removed. 2. Press Red button and it will be deleted, the screen shows a red line through it. T o deselect a deleted channel press Red button again. ✐ Red button refers to coloured buttons Red, Green, Y ellow and Blue. Do not get confused with larger Red Standby button. 3. Add more channels, mov[...]

8 ● How to watch a locked channel. 1. Select a locked channel, Parental lock display appears. 2. Press OK button, enter the Parental code and press OK again. 3. The channel is temporarily unlocked until the channel is changed. 4. Press MENU button to return to normal TV picture. ✐ If Parental lock is activated and you wish to record this locked[...]

9 ● Edit channel list 1. Press Menu button to select Main Menu . 2. Select Channel List by using e e or d d buttons. Press 8 8 to enter . 3. Select Lock channels by using e e or d d buttons. Press 8 8 to enter . 4. T o delete channels from this list use e e or d d buttons to highlight a channel. 6. T o lock or unlock parental locked channels, sel[...]

10 - This feature is used when you wish to record a digital channel on your VCR. - In order to record digital channels you cannot watch another digital channel when recording. Digital channels are recorded using A V2. - T imer recording will switch your TV set to the digital channel at the preset time until the finish time is reached. - Whilst time[...]

11 ■ Child lock Y ou can prevent small children from operating the TV with the front buttons of the TV set. Press the MENU button to select main menu. Press e e or d d buttons to select TV settings. Press 8 8 to enter menu. Press e e or d d buttons to select. Child lock can be set to ON or OFF . Press 7 7 or 8 8 buttons to select. The child lock [...]

12 REMOTE CONTROL REMOTE CONTROL - - Analogue Analogue Screen mode selector T o select the screen mode, AUT O, NA TURAL, ZOOM14:9, TITLE IN 14:9, ZOOM 16:9, TITLE-IN 16:9, FULL or NORMAL. TV/A V switch T o switch from TV , A V1, A V2 or A V3 mode press repeatedly. Direct programme selector For direct access to programmes using (0-9) numeric buttons[...]

13 Many of your TV’ s functions are controlled through the menu function. During the menu operation the following buttons are used. u : T o enter the menu function. : T o go back and to exit the menu function. : T o navigate up and down in the menus. : T o navigate forwards to the next screen or to activate settings. 1. Press the MENU button to s[...]

14 The preset menu can be used to tune new channels, to reorder channels and their programme positions, and to make fine adjust- ments to the tuning. There are two ways to tune in new channels. Auto : Searches for all channels and stores them automatically . Semi : Manual search to add channels. ■ T uning - Auto 1. Press the MENU button to select[...]

15 T eletext - This is a free service to give you lots of varied informa- tion such as news, sports results, weather and travel features. T eletext reception If your aerial signal is poor , the teletext reception operation may be erratic. T eletext brightness level Y ou can change the teletext brightness level. Please return to TV mode.(See Picture[...]

16 ■ Switching into /from standby mode The Standby mode is used for switching the TV set of f for short periods of time. In standby mode the TV is switched of f but is still receiving mains power . ● T o turn the TV set into standby mode, press the 4 4 button . The red power indicator illuminates more brightly . ● T o turn the TV set ON from [...]

17 ■ Screen options T oday there are various transmission formats with different size ratios, eg. 4:3 , 14:9, 16:9 and video formats such as letterbox. ■ AUTO It automatically switches to the optimum screen mode according to the WSS signal provided in the receiving signal source. If the signal does not have it, the TV keeps current screen mode.[...]

18 Common specification Power source AC 220~240V 50Hz T elevision system System I Colour system P AL/NTSC4.43 (P AL/NTSC4.43/NTSC3.58 in A V mode) Channel coverage UHF: 21-69. Aerial input impedance 75 ohm A V terminal A V1: CENELEC Standard Input: Composite video, RGB and audio-L/R Output: TV -output with composite video and audio-L/R A V2: CENELE[...]

19 Sanyo U.K. Sales Ltd. (the company) warrants to the initial retail purchaser that if this equipment is or becomes defective and that, in the opinion of the Company , the defect is due to faulty material or workmanship the Company will, for a period of 12 calendar months from the date of sale to the original purchaser repair or replace, at its so[...]

Part No. 1KA6P1P0046-C C6AD/BD Printed in U.K.[...]