Sanyo PDP-32H1EN manual

Owner's Man ual PDP-32H1ENV Multimedia Plasma Monitor MODEL PDP-32H1AN PDP-32H1EN[...]

2 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER- SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. THIS SYMBOL INDICATES THAT DANGEROUS VOLTAGE CONSTITUTING A RISK OF ELECTRIC SHOCK IS PRESENT WITHIN THIS UNIT. THIS SYMBOL INDICATES THAT THERE ARE IMPORTANT OPERATING AND MAINTEN[...]

3 SAFETY INSTR UCTIONS All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this Plasma Monitor from AC power supply before cleaning. Do not use liquid or aerosol cleaners. Clean only with dry cloth. Follow all warnings and instructions[...]

4 COMPLIANCES A C P ower Cord f or the United Kingdom : This cord is already fitted with a moulded plug incorporating a fuse, the value of which is indicated on the pin face of the plug. Should the fuse need to be replaced, an ASTA approved BS 1362 fuse must be used of the same rating, marked thus . If the fuse cover is detachable, never use the pl[...]

5 T ABLE OF CONTENTS FEA TURES AND DESIGN 6 BEFORE OPERA TION 16 COMPUTER MODE 28 VIDEO MODE 32 SETTING 34 APPENDIX 37 PREP ARA TION 7 NAME OF EACH PART OF PLASMA MONITOR 7 SETTING-UP PLASMA MONITOR 9 CONNECTING PLASMA MONIT OR 11 TERMINALS OF PLASMA MONITOR 11 CONNECTING TO VIDEO EQUIPMENT 13 CONNECTING TO COMPONENT VIDEO EQUIPMENT 14 CONNECTING T[...]

6 FEA TURES AND DESIGN This Plasma Monitor is designed with the most advanced technology. The Plasma Monitor utilizes built-in multimedia features, a palette of 16.77 million colors, and Plasma Display Panel technology. ◆ Compatibility This Plasma Monitor widely accepts various video and computer input signals including; ● 6 Color Systems NTSC,[...]

7 PREP ARA TION NAME OF EA CH P ART OF PLASMA MONIT OR FRONT INFRARED REMOTE RECEIVERS FRONT CONTROLS AND INDICATORS Used to select MENU operation. (P18) MENU BUTTON INPUT BUTTON MAIN ON/OFF SWITCH VOLUME BUTTONS Used to select input source. (P22) Used to adjust volume. (P27) Used to turn Plasma Monitor on or off. (P20) POWER INDICATOR MENU OK INPU[...]

8 PREP ARA TION NAME OF EA CH P ART OF PLASMA MONIT OR BACK COOLING FANS This Plasma Monitor detects internal temperature and automatically controls operating power of Cooling Fans. POWER CORD CONNECTOR TERMINALS AND CONNECTORS (BACK) TERMINALS AND CONNECTORS (SIDE) SPEAKER OUTPUT TERMINALS (RIGHT) SPEAKER OUTPUT TERMINALS (LEFT) (Refer to page 11)[...]

9 SETTING-UP PLASMA MONIT OR PREP ARA TION This Plasma Monitor uses nominal input voltages of 100- 120 V or 200-240 V AC. The Plasma Monitor automatically selects the correct input voltage. It is designed to work with single-phase power systems having a grounded neutral conductor. To reduce the risk of electrical shock, do not plug into any other t[...]

10 PREP ARA TION INST ALLA TION OF OPTIONAL SPEAKERS AND ST AND Place the Speakers to each side of the Plasma Monitor and attach Right and Left brackets with the specified screws. Mount each screw on proper screw hole position and fix it se curely. Connect the red wire to the red terminal on both of the Plasma Monitor and the speakers and connect t[...]

11 CONNECTING PLASMA MONIT OR TERMINALS OF PLASMA MONIT OR This Plasma Monitor has INPUT TERMINALS and OUTPUT TERMINALS on its side and back, for connecting computers and video equipment. Refer to the figure on pages 13 to 15 and connect properly. RS-232C WIRED R/C HEADPHONE SIDE When using Remote Control Unit as Wired Remote Control, Connect Remot[...]

12 CONNECTING PLASMA MONIT OR Y Pb /Cb Pr /Cr VD HD R B G S-VIDEO S-VIDEO R - A UDIO - L R - A UDIO - L R - A UDIO - L R - A UDIO - L(MONO) VIDEO VIDEO VIDEO A UDIO(R/L) D-SUB PC IN COMPONENT/RGB IN VIDEO1 IN VIDEO2 IN MONIT OR OUT Connect analog RGB signal outputs or component video outputs to these jacks. Connect analog RGB signal outputs to R, G[...]

13 Y Pb /Cb Pr /Cr VD HD R B G S-VIDEO S-VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L(MONO) VIDEO VIDEO VIDEO AUDIO(R/L) D-SUB PC IN COMPONENT/RGB IN VIDEO1 IN VIDEO2 IN MONITOR OUT CONNECTING PLASMA MONIT OR CONNECTING T O VIDEO EQUIPMENT Video Source (example) Video Cassette Recorder Video Disc Player Video Cable (RCA x 3) S-VIDE[...]

14 CONNECTING PLASMA MONIT OR CONNECTING T O COMPONENT VIDEO EQUIPMENT Y Pb /Cb Pr /Cr VD HD R B G S-VIDEO S-VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L(MONO) VIDEO VIDEO VIDEO AUDIO(R/L) D-SUB PC IN COMPONENT/RGB IN VIDEO1 IN VIDEO2 IN MONITOR OUT Component Video Source (example) DVD player Video Cable (RCA x 3) Cables used f or [...]

15 CONNECTING PLASMA MONIT OR Y Pb /Cb Pr /Cr VD HD R B G S-VIDEO S-VIDEO R - AUDIO - L R - AUDIO - L R - AUDIO - L R - AUDIO - L(MONO) VIDEO VIDEO VIDEO AUDIO(R/L) D-SUB PC IN COMPONENT/RGB IN VIDEO1 IN VIDEO2 IN MONITOR OUT CONNECTING T O COMPUTER IBM-compatible computers or Macintosh computers (VGA / SVGA / XGA) VGA Cable (supplied) Desktop type[...]

16 MUTE WIDE INPUT ON-OFF V OLUME PC/RGB F COMPONENT OFF TIMER PICTURE ST A TUS MO VE UP MO VE DO WN VIDEO OK OFF ON PO WER MENU BEFORE OPERA TION OPERA TION OF REMO TE CONTR OL Used to select COMPONENT VIDEO input. (P22) Used to execute the selected menu on On-Screen Menu. (P18) POWER ON-OFF BUTTON Used to turn Plasma Monitor on or off. (P20) MENU[...]

17 BEFORE OPERA TION OPEN OPEN 123 Slide the lid upward. Press the lid downward and slide it. Remove the battery compartment lid. Slide 2 batteries into the compartment. Replace the compartment lid. REMO TE CONTR OL B A TTERIES INST ALLA TION Two AA size batteries For correct polarity (+ and – ), be sure the battery terminals are in contact with [...]

18 BUTT ONS OF ON-SCREEN MENU OPERA TION FLO W OF ON-SCREEN MENU OPERA TION You can control and adjust this Plasma Monitor through ON-SCREEN MENU. Refer to the following pages to operate each adjustment on ON-SCREEN MENU. Used to execute the selected menu. OPERA TING ON-SCREEN MENU Used to display ON-SCREEN MENU. Contrast Contrast : Select OK : OK [...]

19 BEFORE OPERA TION Contrast Contrast : Select OK : OK : Select OK : OK MENU : Return ST A TUS : Exit MENU : Return ST A TUS : Exit Brightness Brightness Color Color Tint Tint Sharpness Sharpness Sound Sound Screen adjust Screen adjust PC mode adjustment PC mode adjustment Setup menu Setup menu Information Information : Select : Adjust : Select : [...]

20 B ASIC OPERA TION Connect the Plasma Monitor's AC Power Cord into an AC outlet . 2 TURNING ON / OFF PLASMA MONIT OR 1 Complete the peripheral connections (with Computer, VCR, etc.) before turning on Plasma Monitor. (Refer to "CONNECTING PLASMA MONITOR" on Pages 13~15 for connecting that equipment.) MAIN ON/OFF s witch NOTE : When [...]

21 OFF TIMER F ST A TUS MO VE DOWN OK OFF ON PO WER MENU PO WER ON button WHEN USE MUL TIPLE MONIT ORS When you use multiple Plasma Monitors, you can use POWER ON button and POWER OFF button on Remote Control Unit instead of the POWER ON-OFF button. Press POWER ON button to turn Plasma Monitor ON so as not to affect another Plasma Monitor which may[...]

22 B ASIC OPERA TION SELECTING INPUT SOURCE INPUT button MENU OK INPUT VOLUME MUTE WIDE INPUT ON-OFF V OLUME PC/RGB COMPONENT OFF TIMER PICTURE MO VE UP VIDEO VIDEO button VIDEO INPUT Select either "AV 1 (VIDEO 1)" or "AV 2 (VIDEO 2)" by pressing VIDEO button on Remote Control Unit. (Refer to "CONNECTING TO VIDEO EQUIPMENT&[...]

23 B ASIC OPERA TION PICTURE IMA GE LEVEL SELECT MUTE WIDE V OLUME PC/RGB OFF TIMER PICTURE ST A TUS MO VE UP MO VE DOWN OK MENU IN VIDEO/COMPONENT MODE Dynamic Natural PICTURE button Select image level among Dynamic, Natural, Cinema and Memory by pressing PICTURE button on the Remote Control Unit. Normal picture level preset on this Plasma Monitor[...]

24 B ASIC OPERA TION IMA GE LEVEL ADJUSTMENT : Select : Adjust : Select : Adjust MENU : Return ST A TUS : Exit MENU : Return ST A TUS : Exit Contrast Contrast 63 63 Sound Sound : Select OK : OK : Select OK : OK MENU : Return ST A TUS : Exit MENU : Return ST A TUS : Exit Brightness Brightness Color Color Tint Tint Sharpness Sharpness Contrast Contra[...]

25 B ASIC OPERA TION MUTE WIDE ON-OFF V OLUME PC/RGB COMPONENT OFF TIMER PICTURE MO VE UP VIDEO WIDE button Natural wide Zoom Zoom(Caption-IN) Full WIDE SCREEN OPERA TIONS Provides image to fit width of screen by expanding image width uniformly. This function can be used for enjoying a squeezed video signal with wide video aspect ratio of 16 : 9 sc[...]

26 B ASIC OPERA TION ADJUSTING WIDE IMA GE : Select : Adjust : Select : Adjust MENU : Return ST A TUS : Exit MENU : Return ST A TUS : Exit Screen Adjust Screen Adjust Vertical Vertical 5 5 Horizontal Horizontal 0 0 Press MENU button and ON-SCREEN MENU will appear. 1 Press button to select "Screen adjust" menu and then press OK button. &qu[...]

27 SOUND ADJUSTMENT MUTE V OLUME B ASIC OPERA TION Press VOLUME (+/ – ) button(s) on Remote Control Unit or Front Control to adjust volume. Volume dialog box appears on the screen for a few seconds. (+) button to increase volume, and ( – ) button decreasing. Press MUTE button on Remote Control Unit to cut off sound. To restore sound to its prev[...]

28 COMPUTER MODE SELECTING INPUT SOURCE SELECTING COMPUTER SYSTEM This Plasma Monitor automatically tunes to most different types of computers based on VGA, SVGA or XGA (refer to “ COMPATIBLE COMPUTER SPECIFICATIONS ” on page 31). When selecting Computer, this Plasma Monitor automatically tunes to incoming signal and display proper image withou[...]

29 PC ADJUSTMENT PC MODE ADJUSTMENT "PC mode adjustment" menu is provided to adjust "Auto setup", "Clock", "Phase", "Position", "Power save" and "Information" to conform to your computer. These function can be operated as follows. Auto setup COMPUTER MODE Press MENU button and ON[...]

30 COMPUTER MODE Power save Enable or disable Power save function. Enable Power save by choosing "Yes" with buttons. NOTE : ● The Power save function automatically reduces the Plasma Monitor's power consumption if the computer is not operated for a certain period of time. This function can be used when using the Plasma Monitor with[...]

31 COMPUTER MODE COMP A TIBLE COMPUTER SPECIFICA TIONS Basically this Plasma Monitor can accept the signal from all computers with the V, H-Frequency mentioned below and less than 100 MHz of Dot Clock. NOTE : The image data from connected computer is modified to fit the Plasma Monitor's screen size. Specifications are subject to change without[...]

32 VIDEO MODE SELECTING INPUT SOURCE VIDEO INPUT Select either "AV 1 (VIDEO 1)" or "AV 2 (VIDEO 2)" by pressing VIDEO button on Remote Control Unit. AV 1 AV 2 COMPONENT INPUT Select "COMPONENT" by pressing COMPONENT button on Remote Control Unit. COMPONENT FR ONT CONTR OL OPERA TION Select "AV 1 (VIDEO 1)" , [...]

33 VIDEO MODE SELECTING VIDEO SYSTEM If Plasma Monitor cannot reproduce proper video image, it is necessary to select a specific broadcast signal format among PAL, SECAM, NTSC, NTSC 4.43, PAL-M, and PAL-N. PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N Plasma Monitor automatically detects incoming Video signal, and adjusts itself to optimize its per[...]

34 WHITE P A TTERN The screen saver "White pattern" displays white pattern. 1 2 In the "Screen saver" menu ("White pattern-On"), press button to select "Interval (time)", and press button to select desired interval time. Interval (time) : 30 Min / 60 Min / 90 Min / 0 Min When the interval time is set at "[...]

35 SETTING SETTING MENU Color system Press MENU button and ON-SCREEN MENU will appear. 1 Press button to select "Setup menu" and then press OK button. "Setup menu" will appear. 2 Press button to select the item that you want to setup, and setup the selected item by pressing button. 3 : Select : Select MENU : Return ST A TUS : Ex[...]

36 SETTING Color temperature This function is used for selecting color temperature. Select "Normal", "Cool" or "Warm" with buttons which you wish to select. No operation shut off timer This function turns off Plasma Monitor's power automatically, when there is no operation of Remote Control or Front Control for 3 [...]

37 APPENDIX TR OUBLESHOO TING Before calling your dealer or service center for assistance, check the matters below once again. 1. Make sure you have connected Plasma Monitor to your equipment as described in the section "CONNECTING PLASMA MONITOR" on pages 13 ~ 15. 2. Check cable connection. Verify that all computer, video and power cords[...]

38 APPENDIX There are tiny black points and/or bright points on the PDP. ● There may be some tiny black points and/or bright points on PDP (Plasma Display Panel). These points are normal. Pr oblem: T ry these Solution W ARNING : High v oltages are used to operate this Plasma Monitor . Do not attempt to open the cabinet. If the problem still persi[...]

39 APPENDIX This function activates due to the temperature inside Plasma Monitor. When the temperature inside Plasma Monitor exceeds the normal, after displaying a message, Plasma Monitor will be turned off automatically. INFORMA TION MENU The "information" menu displays a condition of internal temperature, a condition of cooling fan, and[...]

40 APPENDIX TECHNICAL SPECIFICA TIONS Screen Diagonal 32V Product name Multimedia Plasma Monitor Panel type Plasma Display Panel (16 x 9) Display area 716 mm (W) x 399 mm (H) Resolution / Color 852 x 1024 pixels / 16,770,000 colors Viewing Angle 160 ˚ (Vertical / Horizontal) Color System PAL / SECAM / NTSC / NTSC4.43 / PAL-M / PAL-N PC Interface D[...]

41 APPENDIX This symbol on the nameplate means the product is Listed by Underwriters Laboratories Inc. It is designed and manufactured to meet rigid U.L. safety standards against risk of fire, casualty and electrical hazards. 829 (32.6) 829 (32.6) 517 (20.4) 122 (4.8) 101 (4.0) Size in mm (inch) The products listed below are optionally supplied. Wh[...]

42 APPENDIX RS232C TERMINAL Terminal : HDB9-PIN Connect the serial port of computer to this terminal with Serial Cross Cable (not supplied). 3 5 4 2 1 7 9 8 6 No Connect Ground R x D DTR (5V) T x D 1 5 2 4 3 DSR No Connect No Connect No Connect 6 7 9 8 Pin Configuration CONFIGURA TIONS OF RS232C TERMINALS RS232C COMMAND (ASCII) C09 C03 C01 C00 C0A [...]

43 APPENDIX CONFIGURA TIONS OF PC TERMINALS PC IN (D-SUB) TERMINAL Terminal : HDB15-PIN Connect the display output terminal of computer to this terminal with VGA Cable (supplied). When connecting the Macintosh computer, the MAC Adapter (not supplied) is required. 5 1 2 3 4 10 9 6 7 8 15 14 13 11 12 Red Input Ground (Horiz.sync.) Green Input Sense 2[...]

Printed in Japan Part No. 610 301 2599 (1AA6P1P3504-- J3SF) SANY O Electric Co., Ltd[...]