Sanyo PLC HF15000L manual

Multimedia Pr oject or MODEL PLC-HF150 0 0L Owner ’ s Manual ✽ Projection lens not included.[...]

2 ✔ Note: •The On-Screen Menu and figures in this manual ma y dif f er slightly from the product. •The contents of this manual are subject to c hange without notice. F eat ur es and Design This Multimedia Project or is designed with most advanced t echnolog y for por tability , dur ability , and ease of use. This project or utilizes built-in [...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Contents Feat ur es and Design . . . . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . . . . . . . . . . 3 T o T h e O w n e r ..................... 4 Saf ety Instr uctions . . . .[...]

4 C A U T I O N : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P AR TS INSIDE EX CEPT LAMP REPLA CEMENT . REFER SERVICING T O QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGEROUS VO L TAGE C O N ST IT UT I N G A R I S K OF E L E C T R I C SHOCK IS PRESENT WITHIN THIS UNIT . THIS SYMBO[...]

5 All the saf et y and operating instructions should be read before the product is operated. Read all of the instructions giv en here and ret ain them f or later use. Unplug this projector from A C power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollow all w arnings and instructions mark ed on th[...]

6 Openings in the cabinet are provided f or ventilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. Air Cir culation Saf ety Instr uctions Saf ety Instr uctions IMPORT ANT! Filter Maint enance!! T op P anel Fig.1 Fig.2 EXHA UST VENTS AIR INT AKE VENT (Bot tom) T[...]

7 Saf ety Instr uctions Do not radiate strong light suc h as laser light on the projection lens directly , as this may degrade the functionality of the projector . Failure to do so will v oid any applicable w arranties. Cautious use of equipment with laser technology Use the projector properly in specified positions. Improper positioning may reduce[...]

8 Mo ving the Pr ojector CAUTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump the projector , other wise damages or malfunctions may result. – When carr ying the projector , use a suit able carr ying case. – Do not transport the projector by courier or an y other transport ser vice in an unsuit able transport case. This m[...]

9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug . Should the fuse need to be replaced, an AS T A appro ved BS 1362 fuse must be used of the same rating, mark ed thus AS A . If the fuse co ver is det ac hable, ne ver use the[...]

Bot t om 1 0 e t w y v r F r ont q i Bac k P art Names and F unctions v Kensington* Secur ity Slot This slot is f or a Kensington loc k used to deter thef t of the projector . * Kensington is a registered trademark of A CCO Brands Corporation. CA UTION Hot air is exhausted from the e xhaust vents. Do not put heat-sensitiv e objects near this side. [...]

1 1 P art Names and F unctions T er minals and Connectors r R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). e USB CONNECT OR (series B) USB connector is to used to ser vice the projector . y S-VIDEO J ACK Connects the S-VIDEO output signal from video equipment[...]

12 r FOCUS butt on Adjusts the f ocus. (p.28) e ZOOM butt on Zooms in and out the images. (p.28) q ON/S T AND-B Y button T urns the projector on or of f . (pp.24,25) !0 INPUT butt on Selects an input source Input 1, Input 2, Input 3 or Input 4. (pp.33-35) u A UT O PC ADJ . but ton Automatically adjusts the computer image to its optimum set ting . ([...]

13 Indicat ors q w e r t y e W ARNING TEMP . indicator This indicator flashes red when internal projector temperat ure is too high. (pp.79, 86-88) q POWER indicat or This indicator lights green when the projector is ready to be t urned on in st andby mode. And it flashes green in P ow er Management mode. (pp.63, 86-88) w LAMP Indicator This indicat[...]

Remot e Contr ol P art Names and F unctions !6 LIGHT butt on Lights the but tons on the remote control for about 1 0 seconds. t MENU butt on Opens or closes the On-Screen MENU . (pp.26, 27) y POINT ed 7 8 butt ons – Select an item or adjust the value in the ON-SCREEN MENU . (p.26) –P an the image in DIGIT AL ZOOM +/– mode. (p.45) u LENS SHIFT[...]

Remot e Contr ol Bat tery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. T wo AAA size batt eries F or correct polarity (+ and –), be sure bat ter y terminals are in contact with pins in the compartment. T o ensure saf e operation, please obser ve the f ollowing pre[...]

16 When controlling sev eral projectors from eac h remote control at the same time, you can assign a remote control code (Code 1 - Code 8) to individual projectors and remote controls to prev ent remote control interf erence. Assign the same code the y ou specified for the projector to the remote control. See “Remote Control” on page 62 for ass[...]

1 7 Installation Lens Installation Bef ore set ting up the projector , inst all Projection L ens on the projector . Bef ore installation, c hec k where the projector is used and prepare a suit able lens. For the specifications of Projection L ens, contact sales dealer where you purc hased the projector . - Lens installation and r eplacement should [...]

1 8 Installation Projection lens can be mo ved from side to side and up and do wn with the motor -driven lens shif t function. T his function makes the positioning of images easy on the screen. T he amount of lens shif t range varies depending on the lens. The shif t ranges shown below apply to the LNS-S03 lens. (See page 28) Lens Shif t A djustmen[...]

1 9 Installation T er minals of Pr ojector The projector has two replaceable Interf ace board slots. The projector's functions can be extended b y inst alling the optional interface boards into the terminal slots. 2 v acant slots (Input 3 and 4) are provided in y our purc hasing the projector . F or the Optional Interface B oards, contact sale[...]

20 Connecting t o Computer V GA Cable Monitor Output Desktop type Laptop type T er minals of the project or Monitor Output D VI-D Cable BNC Cable Monitor Output U n p l ug t he p owe r c o r ds o f b o t h t h e projector and external equipment from the A C outlet before connecting cables. Cables used for connection • D VI-D cable • Serial cros[...]

21 Installation Connecting t o V ideo Equipment Video Source (e xample) Prof essional Digit al V CR Video Disc Pla yer RGB SCAR T 21 -pin Output VIDEO/Y , Pb/Cb, Pr/Cr Component video output equipment. (suc h as D VD play er or high-definition TV source.) Co mp osite V ide o Out put BNC Cable D VI-D Cable SCART -VG A Cable Unplug the power cords of[...]

22 Installation At tac hing the Cable Tie Cable tie Y ou can dress and secure all cables to a cable tie (supplied). The cable tie is reusable and can be loosened and tightened as many times as needed. Cable tie T o loosen the cable tie 1 . Pull the tab in the arro w direction. T ab 1 2 2. Loosen the cable tie in the ar row direction. Cable tie hold[...]

23 NOTE ON THE POWER COR D A C pow er cord must meet the requirements of the countr y where you use the projector . Confirm the A C plug type with the c hart below and proper A C power cord must be used. If the supplied A C power cord does not match your A C outlet, contact your sales dealer . Pr oject or side A C Outlet side T o PO WER CORD CONNEC[...]

24 Basic Oper ation Connect the projector’ s A C power cord into an A C outlet. The LAMP indicator lights red and the PO WER indicator lights green. Press the ON/S T AND-B Y but ton on the side control or the ON but ton on the remote control. T he LAMP indicator dims and the cooling fans start to operate. The preparation displa y appears on the s[...]

25 Basic Oper ation What is PIN code? PIN (P ersonal Identification Number) code is a securit y code that allows the person who kno ws it to operate the projector . Set ting a PIN code prevents unauthoriz ed use of the projector . A PIN code consists of a four -digit number . Ref er to the PIN code loc k function in the Set ting Menu on pages 64 , [...]

26 Ho w to Oper ate the On-Scr een Menu Basic Oper ation The projector can be adjusted or set via the on-screen menu. The menu has a hierarc hical struct ure, with a main menu that is divided into submenus, whic h are further divided into other submenus. F or eac h adjustment and set ting procedure, refer to respectiv e sections in this manual. Use[...]

27 Basic Oper ation F or detailed functions of eac h menu, see “Menu T ree ” on pages 83-85. Main Menu Sub-Menu e Image select F or computer source, used to select an image lev el among Dynamic, Standar d, Real, and Imag e 1 -1 0 (p.40) . F or Video source, used to select an image le vel among Dynamic, Standard, Cinema, and Image 1 -1 0 (p.48) [...]

28 Basic Oper ation Lens Shif t Adjustment ✔ Note: • T he arrow disappears at the maximum lens shif t in eac h direction. • T he arrows t urn red when the lens shift comes to the center position of the screen. Zoom Adjustment Focus Adjustment Side Control Shut ter F unction Shut ter function allows you to completely bloc k out light to the sc[...]

29 Basic Oper ation Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the ZO OM but tons on the remote control to zoom in and out the image. ZOOM but tons Press the FOCUS but tons on the remote[...]

30 INFO. butt on ✔ Note: • The H-sync freq. and V -sync freq. values shown in the menu list may be dif f erent from the actual v alues. • SERIAL NO. is used to service the projector . Press the INFO . but ton to confirm the current set tings of the projector and the signals being transmit ted to the projector . Use the P oint 7 8 but tons or [...]

31 Basic Oper ation FIL TER but ton Press and hold the FIL TER but ton for more than fiv e seconds to sc hedule a filter cleaning t ask. Remote Contr ol ✔ Note See the previous page f or the description of other but tons. Press the P -TIMER but ton on the remote control to operate the Count up/Count down function. R ef er to p.68 for detail of Se[...]

32 Remote Control POINT but tons KEY ST ONE but ton Press the KEY ST ONE but ton on the remote control to switc h the Standard (for V ertical/Horizontal) /Corner correction adjustment. The Standard or Corner correction adjustment dialog box appears. Use the P oint ed 7 8 but tons to correct the Standard or Corner distortion. T he Standard or Corner[...]

33 The input source c hanges eac h time you press the INPU T but ton on the side control as follo ws: Input 1 → Input 2 → ... Bef ore using the INPU T but ton on the side control or the remote control, you must select a cor rect input source by On-Screen Menu and the latest input source will be displa yed. Press the INPU T 1, INPU T 2, INPUT 3 [...]

34 WHEN SELECTING INPUT 2 (5 BNC INPUT J ACKS ) INPUT MENU When your computer is connected to the INPU T 1 (ANALOG) terminal, select R GB (PC analog). RGB(PC analog) ✔ Note: • I np u t s o u rc e cha n g es if th e INP UT 1 b u tton o n t h e r e mo t e control is pressed. When connecting the computer output [5 BNC T ype (Green, Blue, Red, Hori[...]

35 Input Selection When the video input signal is connected to the Y , Pb/Cb, Pr/Cr jac ks, select Y , Pb/ Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When connecting to video equipment, select the type of Video source in the Source Select Menu. Video Y , Pb/Cb, Pr/Cr When connecting to video equipment, se[...]

36 Comput er Input PC Syst em Menu PC Syst em Menu 1 2 PC system can also be selected manually . Selected system is display ed. Press the MENU but ton to display the on-screen menu. Use the P oint ed but tons to select Input and then press the P oint 8 or the SELECT but ton. Use the P oint ed but tons to select S ystem and then press the P oint 8 o[...]

37 Comput er Input A uto PC A djustment function is provided to automatically adjust Fine sync, T otal dots, P osition H and P osition V to conform to y our computer . T o stor e the adjusted par ameters. The adjusted parameters from the Auto PC Adjustment can be stored in the projector . Once the parameters are stored, the set ting can be done jus[...]

38 Comput er Input Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan sy stem of this projector . Manual PC A djustment enables you to precisely adjust sev eral parameters to matc h those special signal formats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It allows y[...]

39 Comput er Input ✔ Note • Display area (H/V) cannot be selected when 480i, 575i, 480p, 575p, 720p, 1 035i , 1 080i or 1 080p is selected in the PC Sy stem Menu (p.36. • When input computer signal to the projector , PC adjust function will become av ailable . No parameters stored This mode has stored parameters. V alues of T ot al dots, P os[...]

40 1 2 Normal pict ure lev el preset on the projector . Pict ure lev el with improv ed half tone for graphics. User prese t picture adjustment in the Im age adjust Menu. (pp.41 -43) Image select Press the MENU but ton to display the On-Screen Menu. Use the P oint ed but tons to select Image select and then press the P oint 8 or the SELECT but ton. [...]

41 Image Adjust Menu Press the MENU but ton to display the On-Screen Menu. Use the P oint ed but tons to select Image adjust and then press the P oint 8 or the SELECT but ton. 1 2 Use the P oint ed but tons to select the desired item and then press the SELECT but ton to display the adjustment dialog box. Use the P oint 7 8 but tons to adjust the se[...]

42 Clear the c heck mark if y ou do not want to apply the adjusted color data; select the c hec k mark and then press the SELECT but ton. The c hec k mark disappears. LIST MODE Ret urn to the COLOR SELECTION mode so that you can readjust the set ting for the color in that line. (This option is not av ailable if the c heck mark is cleared.) Select t[...]

43 T o reset the adjusted data, select Reset and press the SELECT but ton. A confirmation bo x appears and then select Y es. All adjustments will ret urn to their previous figures. T o store the adjusted data, select Store and press the P oint 8 or the SELECT but ton. Use the P oint ed but tons to select one from Image 1 to 1 0 and press the SELECT[...]

44 Select the desired screen size that conf orms to the input signal source. Scr een menu Pro vides the image within a screen size k eeping its original aspect ratio. ✔ Note • The projector cannot display an y resolution higher than 2048 x 1 080. If your computer ’ s screen resolution is higher than 2048 x 1 080, low er the resolution before [...]

45 Adjust the screen scale and position manually with this function. Press the P oint 8 but ton or the SELECT but ton at Custom adj. and Custom adj. is display ed on the screen, you can use the P oint ed but tons to c hoose the item you want to adjust. Scale H/V ........... Adjusts the Horiz ont al/V ertical screen scale. H&V ..................[...]

46 This function is used to adjust k ey stone distortion of the projected image. Use the P oint ed but tons to c hoose the item you w ant to adjust. This function ret urns all adjusted values to the factory default set tings. Press the SELECT but ton at Reset to displa y a confirmation box. T o reset, press the SELECT but ton at Y es. Ceiling Rear [...]

47 If the projector cannot reproduce proper video image, select a specific broadcast signal format from among P AL , SECAM , NTSC , NTSC 4.43 , P AL -M , and P AL -N . The projector automatically detects an incoming video signal, and adjusts itself to optimize its perf ormance. When the Video Sy stem is 1 035i , 1 080i or 1 080p , select the system[...]

48 V ideo Input Normal picture le vel preset on the projector . Picture le vel adjusted with fine tone. User preset pict ure adjustment in the Image adjust Menu. (p.51) Image select menu 1 2 Press the MENU but ton to display the On-Screen Menu. Use the P oint ed but tons to select Image select and then press the P oint 8 or the SELECT but ton. Use [...]

49 V ideo Input V ideo Input 1 2 Press the P oint 7 but ton to decrease the contrast; press the P oint 8 but ton to increase the contrast (from 0 to 63). Press the P oint 7 but ton to decrease the brightness; press the P oint 8 but ton to increase the brightness (from 0 to 63). Press the P oint 7 but ton decrease the intensit y of the color; press [...]

50 ✔ Note • When White balance Red, Green or Blue is adjusted, the Color temp. lev el will c hange to Adj.. • Tint cannot be selected when the video sy stem is P AL, SECAM , P AL -M or P AL -N (p.47). Press the P oint 7 but ton to lighten red/green/blue tone of the blac k level of an image; press the P oint 8 but ton to deepen red/green/blue [...]

51 V ideo Input An interlaced video signal can be display ed in progressive mode. Press the P oint 7 8 but tons to c hange the progressive scan mode. Of f ......... Progressive scan mode is Of f . On .......... Progressive scan mode is On. Film ........ For w atc hing a film. W ith this function, the projector reproduces pict ures faithful to the o[...]

52 V ideo Input ✔ Note: • When no signal is detected, Normal is set automatically and the A spect dialog box disappears. • T he adjustable range for Scale H/V and P osition H/V are limited depending on the input signal. • Natural wide cannot be selected when 720p, 1 035i, 1 080i or 1 080p is selected on A V System Menu (p.47). 1 2 Press the[...]

53 V ideo Input This function ret urns all adjusted values to the f actor y default set tings. Press the SELECT but ton at Reset to displa y a confirmation box. T o reset, press the SELECT but ton at “Y es. ” Ceiling Rear When this function is set to On, the picture will be top/ bot tom and lef t/right rev ersed. This function is used to projec[...]

54 Set tings Press the MENU but ton to display the On-Screen Menu. Press the P oint ed but tons to select Set ting and press the P oint 8 or the SELECT but ton to access the submenu items. 1 2 Use the P oint ed but tons to select the desired item and then press the P oint 8 or the SELECT but ton to access the selected item. This projector has a Set[...]

55 Set tings Select the bac kground color or image when no input signal is detected. Press the P oint ed but tons to switc h bet ween eac h option. Blue ................... P rojects a blue bac kground. User ................... Projects a capt ured image. Blac k .................. P rojects a blac k bac kground. Allows you to select a lamp mode. 4-[...]

56 Select the lamp operation when the total lighting time of a lamp exceeds the recommended total hours of use. Mode 1 ............ A lamp can be turned on even after exceeding the recommended total hours of use. Mode 2 ............ A lamp can be turned on even after exceeding the recommended total hours of use. But the projector turns off automati[...]

57 Set tings P in P : Pro vide the images of Main pict ure and Sub picture at the ratio of Screen aspect in the Screen Menu. P by P : P rovide the images of Main pict ure and Sub picture at the ratio of 4:3. Mode Main pictur e / Sub pictur e Input ..... Select an input from Input 1 -4. Source .. Select an input source. T he display v aries dependin[...]

58 Set tings This function allo ws multiple projector images to be seamlessly ov erlapped. When displaying multiple screens, eliminates the dif f erence in color between the images that are projected from the projectors. Use the P oint ed but tons to select Edge blending and then press the SELECT but ton to display a dialog box. Use the P oint ed7 [...]

59 Set tings Adv anced color matc hing: Press the POINT ed but tons to switc h between “ On ” and “ Of f ” . Selecting On display s the values whic h link to the Color Matc h values. Measured Information: When selecting “Measured Information ” , the window sho wn right appears. Current image lev el is shown. T o go bac k to the “ Adv [...]

60 This function allo ws you to customiz e the screen logo with Logo select, Capt ure, Logo PIN code loc k and Logo PIN code c hange functions. ✔ Note When On is selected in the Logo PIN code loc k function, Logo select, Capt ure and Logo PIN code c hange cannot be selected. Logo select This function decides on the starting-up display from among [...]

61 This function pre vents an unauthoriz ed person from c hanging the screen logo. Off ............. The screen logo can be c hanged freely from the Logo Menu (p.60). On ............. The screen logo cannot be c hanged without a Logo PIN code. If you w ant to c hange the Logo PIN code loc k set ting , press the SELECT but ton and the Logo PIN code [...]

62 Set tings This function allo ws you to sc hedule a filter cleaning task. Select Filter control from the Set ting menu and Y es in the confirmation box, or press the FIL TER but ton on the remote control for approximately 5 seconds. ✔ Note • T he filter cleaning icon and “Cleaning is sc heduled” message disappear 4 seconds af ter a filt[...]

63 Set tings No signal 4 : 50 Timer lef t before Lamp is of f . F or reducing pow er consumption as well as maintaining the lamp lif e, the P ow er management function turns of f the projection lamp when the projector is not operated for a certain period. Select one of the follo wing options: Ready ................. When the lamp has been fully coo[...]

64 Set tings Ke y lock PIN code lock This function loc ks the side control and remote control but tons to prevent operation b y unauthorized persons. . . . . . Unloc ked. . . . . . Loc k s the operation of the side control. T o unloc k, use the remote control . . . . . L oc k s the operation of the remote control. T o unloc k, use the side control.[...]

65 When the projector is loc ked with a PIN code, the PIN code loc k symbol appears in the Guide. T o change the PIN code loc k set ting T o enter a PIN code When using side control Use the P oint ed but tons on the side control to select a number . Press the P oint 8 but ton to fix the number and move the red frame pointer to the next bo x. T he n[...]

66 Use the P oint ed but tons to adjust the Projector ID . Projector ID ... 1 - 999. (F actor y default set ting : Projector ID 1) This f eature allo ws users to set serial communication configuration (Projector ID) when se veral projectors are connected via the RS-232C terminal (serial port) of the projector . Shut ter function is available to blo[...]

67 When you w ant to make a digital processing of a projected image faster , set this function. Use the P oint ed but tons, select an item of Of f/Low/Mid/ High. Digital processing speed becomes fast by order of L ow → Mid → High. High is the fastest. Fig.1 ✔ Note: • T he follo wing functions are not av ailable respectively when Video dela [...]

68 ✔ Note: • Normally , the filter cleaning unit automatically starts cleaning the mesh filter either while cooling down the projector af ter the pow er was t urned of f or after restarting the projector . • When the icon as shown in Fig.3 appeared for the first time, replace the filters as soon as possible. If you t urn of f the projector be[...]

69 Set tings This function allo ws you to c hange the present ation of the P- timer and ex ecute it. Select one of the follo wing options: Count up ............ The P -timer display 00 0:00 appears on the screen and the count starts (0 0 0:0 0– 1 80:00) Count down ....... The time set in the Timer set ting appears on the screen and the countdown [...]

70 Ho w to Ov er lap the Pr ojection Imag es on a Scr een Y ou can obt ain a seamless image by using the Edge Blending function whic h blends the images projected from multiple projectors and digitally dims the edges of the images and the Color Matc hing function whic h eliminates color unev enness. F ollow the steps from 1 to 5 (or 8 if necessary)[...]

71 ✔ Note: • T he o verlapping area might become une ven depending on the images. In suc h a case, it is recommended to decrease the contrast of the images in the Image A djust Menu. If the colors of the lef t and right images do not matc h, then follo w the next step. Select Color matc hing in the setting menu and displa y the Color matc hing [...]

72 Maint enance and Car e AMC unit Maintaining the AMC unit AMC unit Filter cleaning unit cov er Dust collects here. RECOMMEND A TION W e r ecommend av oiding dusty/smoky envir onments when operating the pr ojector . Usage in these en vir onments may cause a poor image quality . When using the projector under dusty or smok y conditions, dust may ac[...]

73 Maint enance and Car e CA UTION • Af ter cleaning or replacing the filter , i nsert the AMC unit completely . If not, the projector cannot be turned on. • Do not put an ything into the air vents. Doing so ma y result in malfunction of the projector . • Do not w ash the filters in water or an y other liquid. Other wise the filters ma y be d[...]

7 4 Maint enance and Car e Filter count er Be sure to reset the Filter counter af ter replacing the filters. Press the MENU but ton to display the On-Screen Menu. Use the P oint ed but tons to select Set ting and then press the P oint 8 or the SELECT but ton. Use the P oint ed but tons to select Filter counter and then press the SELECT but ton. Use[...]

75 Maint enance and Car e Lamp Manag ement This P rojector is equipped with 4 Projection Lamps to ensure brighter image and those lamps are controlled by the Lamp Management F unction. T he Lamp Management F unction detects the st atus of lamps and sho ws the status on screen or on the LAMP REPLA CE indicators. This function also automatically cont[...]

7 6 Maint enance and Car e Chec k the LAMP 1/2/3/4 REPLA CE indicators on top of the projector . When any of the indicators blinks rapidly , wait at least 20 minutes until it blinks slowly . Af ter that, go to the next step. When any of the indicators blinks slowly , go to the next step. Loosen the two scre ws that securing the lamp and pull out th[...]

77 This projector uses high-pressure lamps whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. l Lamp lif etime ma y dif f er from lamp to lamp and according to the environment of use. There is no guarantee of the same lif etime for eac h lamp. Some lamps may fail or terminate[...]

78 Maint enance and Car e T urn of f the projector , press the Main On/Off S witc h to Of f and unplug the A C power cord from the A C outlet before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blow er to[...]

79 Maint enance and Car e Maint enance and Car e The W ARNING indicators show the state of the function whic h protects the projector . Chec k the st ate of the W ARNING TEMP . indicator and the LAMP indicator to take proper maintenance. W ar ning Indicat ors The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temp[...]

80 T roubleshooting Bef ore calling your dealer or service center for assistance, c hec k the items below once again. 1 . Make sure you ha ve properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and po wer cords are properly connected.[...]

81 appears on the scr een – T he end of lamp lif e is approaching. R eplace the lamp with a ne w one af ter it has cooled down. (See page 7 6) 　　　　 or appears on the scr een – The remaining time ex ceeded the specified time or reac hed 0%. In the lat ter case, replace the filter with a new one promptly . (See pages 73, 7 4) The image is[...]

82 W ARNING: High voltag es are used t o operat e this pr ojector . Do not at t empt to open the cabinet. If problems still persist af ter following all operating instructions, contact the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about the problem. We will advise y ou ho w to obtain ser[...]

83 Menu T r ee Input RGB (PC analog) RGB (Scart) RGB (PC digital) RGB (A V HDCP) Input 3 RGB Video S-video Input 2 ✔ Note: •The Menu displa y varies depending on the input signal. Appendix Input 4 (F or Optional Interface Boards) (F or Optional Interface Boards) HDMI Computer Input/HDMI Input/V ideo Input Input 1 Projector Infor mation Remote c[...]

84 HDMI Input/Video Input 0–63 0–63 0-1 5 Image adjust Contrast Brightness Red Green Blue Sharpness Noise reduction Progressiv e Gamma 0–63 0–63 0–63 0–31 Of f/On/Film Of f/ On Color management Auto pict ure control Of f/L1/L2 Color temp. Color temp. Of fset Red/Green/Blue COLOR GAMMA COLOR M. MENU Mid Lo w COLOR M. ALL DEL MENU Adv anc[...]

85 Appendix Fan control 1–30 Min. P osition 1 2 languages Bac kground Display Lamp mode 4-Lamps Edge blending On/Off All On/Of f Blac k level T est pattern Reset Lamp inter val Menu of f Remote control RC sensor P ower management Setting Menu size Normal Double On Countdown Of f Of f Blue User Blac k T arget Current Constant mode Auto Normal Eco1[...]

86 Appendix Indicat ors and Pr ojector Condition Chec k the indicators for the projector condition. The pr ojector is oper ating nor mally . • • • on • • • of f • • • blinking at the normal rate (approx. 1 second ON, 1 second OFF) • • • dim • • • blinking slo wly (approx. 2 seconds ON, 2 seconds OFF) • • • blinki[...]

87 Appendix The pr ojector is det ecting abnor mal condition. Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP REP . orang e The temperat ure inside the projector is elevated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The proje[...]

88 Appendix The pr ojector is det ecting abnor mal condition. Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e SHU TTER blue LAMP REP . orang e If the Filter counter reac hed a time set in the timer set ting , the icon as shown in Fig.1 appears on the screen and the WARNING FIL TER indicator on th[...]

89 Appendix Compatible Comput er Specifications Basically this projector can accept the signal from all computers with the V - and H-F requency mentioned below and less than 230 MHz of Dot Cloc k. ✽ ✔ Note: • Alphabet let ter "i" placed beside some of the resolutions represents interlace signal. “T r ue ” cannot be selected. ✽[...]

90 When an input signal is digital from the HDMI or DVI-D terminal, ref er to the c hart below . ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq. (Hz) D -VG A 6 4 0x4 80 31.470 59 . 9 4 0 D - 4 8 0 i 720 x4 8 0 i 1 5.73 4 6 0.0 0 0 D - 5 75 i 72 0x 5 76 i 15.6 25 5 0. 0 0 0 D - 4 8 0 p 720 x4 8 0 31 .470 6 0 .0 0 0 D - 5 75 p 720 x 57 5 31 . [...]

91 When using the optional board (D VI) “ POA -AMD23ADI” , ref er to the c hart on the previous page. When using other optional boards, ref er to the c harts below . Suppor ted Signal F or mat f or Optional Board ON-SCREEN DISPLA Y RESOLUTION H-Fr eq.(kHz) V -Fr eq.(Hz) D-480i 720x480 1 5.734 60.0 00 D-575i 720x57 6 15.625 50.000 D-1 035i 1 920[...]

92 Appendix T echnical Specifications Mechanical Inf or mation P rojector T ype Multi-media Projector Dimensions (W x H x D) 25.59” x 1 3.7 4” x 32.09” (650.0 mm x 349.0 mm x 81 5 mm) Net Weight 1 02.5 lbs (46.5 kg) F eet Adjustment ±3.0˚ P anel Resolution LCD P anel S ystem 1 .64” TFT Activ e Matrix type, 3 panels P anel Resolution 2,048[...]

93 Optional P arts The parts listed belo w are optionally av ailable. When ordering those parts, specify the item name and Model No. to the sales dealer . l T he specifications are subject to c hange without notice. l LCD panels are manuf actured to the highest possible standards. Even though 99.99% of the pix els are ef fectiv e, a tiny fraction o[...]

94 Configur ations of T er minals ANAL OG TERMINAL(Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 CONTROL POR T CONNECT OR (D-sub 9 pin) DIGIT AL (D VI-D) TERMINAL (D VI 24 PIN) 1 9 17 2 10 18 3 1 1 19 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 USB PORT(Ser ies B) 2 3 4 1 13579 11 13 15 17 19 18 16 14 12 10 8 6 4 2 HDMI TERMINAL(19 pin T ype [...]

95 Appendix W rite down the PIN code number in the column belo w and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , cont act the ser vice center . Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factory set number will be i[...]

96 Dimensions Appendix Unit: mm (inc h) 620(24.41) 815(32.09) 420(16.54) 420(16.54) 4–M8 4–M10 312(12.28) 148(5.83) 95(3.74) 37(1.46) 183(7.21) 137(5.39) 550(21.65) 349(13.74) 349(13.74) 144(5.67) 143(5.63) 82(3.23) 25(0.98) 35(1.38) 3º 301(11.85) 48(1.89) 25(0.98) 650(25.59) 188.5(7.42) 198.5(7.82) 570(22.44) 40(1.58) 213(8.39) 115(4.53) 224([...]

97 On-Board Optional Interface B oard Input1 Input2 Dsub -DVI Component -S-video SDI Dual Link SDI Analog PC Scart Digital Analog PC Component Video/ S-Video Analog PC Scart Digital Analog PC Component Video/ S-video Digital Digital On-Board Input1 Analog PC o o o o o o o o o o o o Scart o o o o o o o o o o o o Digital o o o o o o o o o o o o o On-[...]

98 Appendix Ser ial Control Int erf ace This projector pro vides a function to control and monitor the projector's operations by using the R S-232C serial port. Connect a RS-232C serial cross cable to SERIAL PORT IN on the projector and serial port on the PC (See p.1 1). 1 2 3 Baud rate : 9600 / 1 920 0 bps P arit y c hec k : none Stop bit : 1[...]

99 Appendix Status Read Commands The command is sent from PC to the projector with the format belo w; “CR” [Command] [CR] Command: one c haracter (ref er to the command table below .) The projector decodes the command and ret urns the 'Character string' with the format belo w; For mat Command F unction Ret urn value P rojector status [...]

KL8A SANY O Electric Co ., Ltd.[...]