Sennheiser SK 3063-U manual

SK 3063-U Instruction Manual[...]

[...]

1 Contents Important safety instructions ............... ................. ................. ........ 2 SK 3063-U Mikroport bodypack tr ansmitter ........... .............. ........ 3 Features ......... .................... ................ ..................... .................... ....... 3 Delivery includes ............... ................. ....[...]

2 Important safety instructions • Please read this instruction manual carefully and completely before using the device. • Make this instruction manual easily accessible to a ll users at all times. Always include these in structions when passing the device on to third parties. • Never open the device! If devi ces are opened by customers in bre[...]

3 SK 3063-U Mikroport bodypack transmitter T ogether with a connected microphone, the transmit ter can be used as a wireless microphone. Due to its small dimensions and extremely flat design, the SK 306 3-U is especially suitable for all applications where a very unob tr usive transmitter is required, e.g. film and TV product ions, musicals. The tr[...]

4 Delivery includes The packaging contains the following items: 1 SK 3063-U bodypack tran smitter with belt clip 1 B 50 battery pack 1 antenna 1 set of colour-coded identific ation markers 1 instruction ma nual Product overview 쐃 Antenna socket 쐇 Channel selector switch 쐋 Type plate 쐏 Catches 쐄 Charge status display (on the power pack) ?[...]

5          [...]

6 Putting the SK 3063- U transmitter into operation Selecting a microphone The SK 3063-U transmitter can be used with the Sennheiser MKE 2-4 , MKE 102-4 (omni-directional) and MKE 40-4, MKE 10 4-4 (cardioid) clip-on microphones. The power supply of these microphones is via the microphone inpu t 쐎 of the transmitter. 왘 Unscrew the coupling ri ng[...]

7 T o attach t he B 50/B 250 battery pack: 왘 Using the thumb and index finger of one hand, push the two catches 쐏 on the transmitter as shown in diagram A . The battery pack can now be removed from the transmitter. 왘 Insert the batteries into the ba ttery compartment as shown in diagram B or C . Depending on the battery pack, you have to i ns[...]

8 The B 50/B 250 battery pack The B 50/B 250 battery pack has the following features: Attaching and removing the accupack 왘 Using the thumb and index finger of one hand, push the two catches 쐏 on the transmitter as shown in diagram A on page 6. The accupack can now be re moved from the transmitter . 왘 Connect the accupack to the transmitter. [...]

9 • Display indicates the ma ximum possible capacity after the accupack has been fully charged in the L 50 charger • Measurement of actual capacity and consideration of natural ageing • During operation, the percentage display decreases in correspondence to the remain ing accupack capacity Discharge the accupack from time to time The capacity[...]

10 Attaching the transmitter to clot hing The transmitter is attached to cl othing (e.g. belt, waistb and) with the suppli ed belt clip. The clip is detachable so that you can also attach the transmitter with the cable a nd the antenna pointing downwards . 왘 Withdraw the clip from its fixing points and attach it the other way round. In order to p[...]

11 Using the SK 3063-U transmitter Switching the transmitter on 왘 Attach the power pack to the transmitter. 왘 T o switch the transmitter on, set the on/off switch 쐂 to ON . The red operation indicator 쐆 lights up. If the operation indicator 쐆 does not light up, check the power pack. Setting the channel or the fr equency The assignment of [...]

12 Adjusting the sensitivity The sensitivity switch 쐊 allows you to adjust the gain of the microphone input in 8 steps. T o provide for an accurate setting, use a receiver fitted with a deviat ion indicator when ad justing the sensitivity . The sensit ivity is set correctly wh en the PEAK LED 쐆 flashes brightly only duri ng peak levels. In prac[...]

13 Specifications RF output power typ. 30 mW Transmission frequencies 16 Frequency range 450 − 960 MHz Switching bandwidth 24 MHz Frequency stability ±5 ppm Spurious emis sion < 4 nW Modulation FM Nominal/peak deviation ±40 kHz/±56 kHz Noise reduction system Sennheiser » HiDyn Plus « Input sensitivity for peak deviation, adjustable in 8 s[...]

14 T ype approvals Operating time with alkaline -manganes e cells B 50-2 B 250-2 4.5 hrs with SK 50/SK 3063 > 9 hrs with SK 5 0/SK 3063 > 2.5 hrs with SK 25 0 Operating time with NiMH rechargeable batteries BA 50 BA 250 > 6 hrs > 10 hrs Charging time wi th L 50 charger max. 2.5 hrs (depending on the resi dual cha rge of t he rechargeabl[...]

15 Accessories The following a ccessories are availa ble from your specia list dealer: Cat. No. Accessory/spare part 003972 SK 50-T transmitter bag[...]

16 Manufacturer declarations W arranty Sennheiser electronic GmbH & Co . KG gives a warranty of 24 months on this product. F or the current warranty conditions, please visit our web site at www.sennheiser.com or contact your Sennheiser partner. CE Declaration of Conformity This equipment is in compliance with the essential requirements and othe[...]

17 Statements regardin g FCC and Industry Canada This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operat ion is subject to the following two conditions: (1) this de vice may not cause harmful interference, and (2) this device must accept any interference received, including interferen ce that may cause un desi[...]

18 Changes or modifications made to this equipment not expressly approved by Sennheiser electr onic Corp. may void the FCC authorization to operate this equipment. Before putting the device into operation, p lease observe the respective country-specific regulations![...]

Sennheiser electronic GmbH & Co. KG Am Labor 1 30900 Wedemark, Germany Phone +49 (5130) 600 0 Printed in Germany Fax +49 (5130) 60 0 300 Publ. 03/2009 www.sennheiser.com 078329/A01[...]