Sharp LC-19LE510K manual

LC-19LE510K LCD COLOUR TELEVISION OPERA TION MANUAL ENGLISH 5 0 1 8 6 8 3 6 SHARP ELECTRONICS (Europe) GmbH Sonninstraße 3, D-20097 Hamburg SHARP CORPORA TION http://www .sharp-eu.com[...]

English - 1 - Contents Features ................................................................. 3 Dear SHARP customer ........................................... 3 Introduction ............................................................. 3 Preparation ............................................................. 3 Important safety precautions ..[...]

English - 2 - SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fi tted with a non-rewireable (moulded) plug incorporating a 5A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked ASA or and of the same rating as above, which is also indicated on the pin face of the plug, must be used. Always r[...]

English - 3 - Features Remote controlled colour LCD TV . • Fully integrated T errestrial digital TV (DVB-T - MPEG2) • HDMI connectors for digital video and audio. This • connection is also designed to accept high de fi nition signals. USB input. • Programme recording • Programme timeshifting • 1000 programmes (analogue+digital). • OS[...]

English - 4 - Important safety precautions Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean • the product. Do not use liquid cleaners or aerosol cleaners. Use a soft damp cloth to gently wipe the panel when it is dirty . T o protect the panel, do not use a chemical • cloth to clean it. Chem[...]

English - 5 - Safety Precautions Read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240V AC, 50Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a piece of furniture, etc. on the power cord (mains [...]

English - 6 - LCD Screen The LCD panel is a very high technology product with about a million thin fi lm transistors, giving you fi ne picture details. Occasionally , a few non-active pixels may appear on the screen as a fi xed blue, green or red point. Please note that this does not affect the performance of your product. W arning! Do not leave[...]

English - 7 - Package Contents SLEEP SCREEN PRESETS LANG. FAV EPG SWAP SOURCE C DISP . SEARCH MODE INFO CH V Remote Control LCD TV Batteries: 2 X AAA Instruction Book Quick Guide 1 X Video & Audio Connection Cable 1 X Component Video Connection Cable Note: Y ou should check the accessories after purchasing. Make sure that each accessory is incl[...]

English - 8 - Remote Control Buttons Standby 1. Image size / Zooms videos (in Media Browser 2. video mode) Sleep T imer 3. Mono / Stereo - Dual I-II / Currrent Language (*) 4. (in DVB channels) Favourite Mode Selection (in DVB channels) 5. Numeric buttons 6. Electronic programme guide (in DVB channels) 7. No function 8. Media Browser 9. Navigation [...]

English - 9 - LCD TV and Operating Buttons FRONT and REAR VIEW Control buttons VIEW Control Buttons PV -A V 1. Standby Off/On button 2. TV/A V button 3. Programme Up/Down buttons- V olume Up/Down buttons Note :Y ou can use +/- buttons to change volume. If you want to change channels, press P/V/ A V button once and then use +/- buttons. If you hold[...]

English - 10 - Viewing the Connections - Side Connectors CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that 1. you subscribe to. For more information, see “Conditional Access” section. USB Inputs. 2. Note that programme recording feature is available via these USB inputs. Y ou can connect external hard d[...]

English - 1 1 - Using USB Inputs USB Connection Y ou can connect a USB hard disk drive or USB • memory stick to your TV by using the USB inputs of the TV . This feature allows you to play fi les stored in a USB drive or record programmes. 2.5” and 3.5” inch (hdd with external power supply) • external hard disk drives are supported. T o rec[...]

English - 12 - Connecting to a DVD Player via Component Sockets (YPbPr) or Scart Cable Some DVD players are connected through • COMPONENT SOCKETS (YPbPr) . In this case, you must use the supplied Component video connection cable for enabling connection. First, plug single jack of the cable to the TV’ s YPbPr socket (side). Afterwards, insert yo[...]

English - 13 - Connecting the LCD TV to a PC For displaying your computer ’s screen image on your LCD TV , you can connect your computer to the TV set. Power off both computer and display before making any connections. Use 15-pin D-sub display cable to connect a PC to the LCD TV . When the connection is made, switch to PC source. See “Input sel[...]

English - 14 - Input Selection Once you have connected external systems to your TV , you can switch to different input sources. Press “SOURCE” button on your remote control consecutively for directly changing sources. Basic Operations Y ou can operate your TV using both the remote control and onset buttons. Operation with the Buttons on the TV [...]

English - 15 - Y ellow button: Display EPG data in accordane with timeline schedule Blue button (Filter): Views fi ltering options. (RECORD): the TV will start to record the selected progamme. Y ou can press again to stop the recording. Up/Down/Left/Right: Navigate. Red button (Prev Time Slice): Displays the programmes of previous time slice. Gree[...]

English - 16 - T o cancel an already set recording, highlight that • programme and press the OK button and select the option “ Delete Rec. Timer ”. The recording will be cancelled. Note: Y ou cannot switch to any other channel or source while there is an active recording on the current channel. Set Timer / Delete T imer After you have selecte[...]

English - 17 - IMPORT ANT! If you are located at a TV regional border or are able to receive broadcasts from more than one transmitter the “Choose Region” OSD will be displayed after the digital channels have been scanned. T o prevent poor quality pictures or unwanted regional variation from being stored in your main channel list you MUST! sele[...]

English - 18 - Digital Manual Search In manual channel scan, the number of the multiplex or frequency are entered manually and only that multiplex or frequency are searched for the channels. After selecting search type as Digital Aerial , you can enter the multiplex or frequency number using the numeric buttons and press OK button to search. Analog[...]

English - 19 - Edit Number screen will be displayed. Enter the • desired channel number by using the numeric buttons on the remote control. If there is a previously stored channel on that number , a warning screen will be displayed. Select Y es if you want to move the channel and press OK . Press • OK button to process. Selected channel is now [...]

English - 20 - Y ou can select a broadcast type option from the list by using “ ” /“ ” and OK buttons. On-Screen Information Y ou can press “INFO” button to display on-screen information. Details of the station and current programme will be displayed on the information banner . The information banner gives information on the channel sel[...]

English - 21 - Y ellow : Opens subtitle time correction menu Press SWAP button to switch back to previous menu. Viewing Photos via USB When you select Photos from the main options, available image fi les will be fi ltered and listed on this screen. Jump (Numeric buttons) : Jump to selected fi le using the numeric buttons. OK : Views the selected[...]

English - 22 - All the recordings are kept in a list in the recordings library . RED button (Delete) : Erases the selected recording. GREEN button (Edit) : Makes changes on the selected recording. BLUE button (Sort) : Changes the order of the recordings. Y ou can select from a wide range of sorting options. OK button : Activates play options menu: [...]

English - 23 - this case, OSD will display the programmed events for recording. Press (STOP) button to cancel instant recording. The following OSD will be displayed: Select Y es by using “ ” or “ ” / OK buttons to cancel instant recording. Note: Switching to a different broadcast or source; and viewing Media Browser are not available during[...]

English - 24 - Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Note : Y ou can shift to screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as panaromic, 14:9 Zoom, Cinema or Subtitle. 14:9 This zooms up the wide picture (14:9 aspect ratio) to the upper and lower limi[...]

English - 25 - Con fi guring Picture Settings Y ou can use different picture settings in detail. Press “MENU” button and select the Picture icon by using “ ” or “ ” button. Press OK button to view Picture Settings menu. Operating Picture Settings Menu Items Press “ • ” or “ ” button to highlight a menu item. Use “ • ” o[...]

English - 26 - Con fi guring Sound Settings Sound settings can be con fi gured according to your personal preferences. Press “MENU” button and select the fi rst icon by using “ ” or “ ” button. Press OK button to view Sound Settings menu. Operating Sound Settings Menu Items Press “ • ” or “ ” button to highlight a menu item[...]

English - 27 - Using a Conditional Access Module IMPORT ANT : Insert or remove the CI module only when the TV is SWITCHED OFF . In order to watch certain digital channels, a conditional • access module (CAM) can be necessary . This module must be inserted in the CI slot of your TV . Obtain the Conditional Access Module (CAM) and • the viewing c[...]

English - 28 - Primary settings are the fi rst priority when multiple • choices are available on a broadcast. Secondary settings are the alternatives when the fi rst options are not available. Parental Control T o prohibit viewing of certain programmes, channels and menus can be locked by using the parental control system. This function enables[...]

English - 29 - Press • GREEN button to save the timer . Press RED button to cancel. Editing a Timer Select the timer you want to edit by pressing “ • ” or “ ” button. Press • GREEN button. Edit T imer menu screen will be displayed. When fi nished with editing, press • GREEN button to save. Y ou can press “MENU” button to cancel[...]

English - 30 - Con fi guring Source Settings Y ou can enables or disable selected source options. The TV will not switch to the disabled source options when “SOURCE” button is pressed. Select • Sources in the Settings menu and press OK button. Press“ • ” or “ ” buttons to select a source. Use “ • ” or “ ” button to enable[...]

English - 31 - If the TV locates any new or missing broadcasts, a menu screen will be displayed, asking you whether or not to execute these changes. Other Features Displaying TV Information : Programme Number , Programme Name, Sound Indicator , time, teletext, channel type and resolution information is displayed on the screen when a new programme i[...]

English - 32 - Tips Screen Care : Clean the screen with a slightly damp, soft cloth. Do not use abrasive solvents as they may damage the coating layer of the TV screen. For your safety , unplug the mains plug when cleaning the set. When moving the TV , hold it properly from the bottom part. Image Persistence : Please note that ghosting may occur wh[...]

English - 33 - Appendix A: PC Input T ypical Display Modes The display has a maximum resolution of 1360 x 768. The following table is an illustration of some of the typical video display modes. Y our TV may not support different resolutions. Supported resolution modes are listed below . If you switch your PC to an unsupported mode, a warning OSD wi[...]

English - 34 - Appendix C: Supported DVI Resolutions When connecting devices to your TV’ s connectors by using DVI converter cables (not supplied), you can refer to the following resolution information. 24Hz 25Hz 30Hz 50Hz 60Hz 480i ; 480p ; 576i ; 576p ; 720p ;; 1080i ;; 1080p ;;;; ; Appendix D: Supported File Formats for USB Mode Supported Play[...]

English - 35 - Appendix E: Software Upgrade • Y our TV is capable of fi nding and updating new software upgrades over broadcast channels. • For broadcast channels search, TV looks the available channels stored in your settings. So before software upgrade search, it is advised to auto search and update all available channels. 1) Software upgrad[...]

English - 36 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND NUMBER OF PRESET CHANNELS 1000 CHANNEL INDICA TOR On Screen Display RF AERIAL INPUT 75 Ohm (unbalanced) OPERA TING VOL T AGE 220-240V AC, 50Hz. AUDIO German + Nicam Stereo AUDIO OUTPUT POWER (W RMS. ) (1[...]

English - 37 - Dimensional Drawings 00_MB60_[GB]_1910UK_IDTV_PVR_BRONZE17_19942LED_YPBPR_10072630_5018xxxx.indd 37 00_MB60_[GB]_1910UK_IDTV_PVR_BRONZE17_19942LED_YPBPR_10072630_5018xxxx.indd 37 15.07.2011 13:38:20 15.07.2011 13:38:20[...]

English - 38 - End of life disposal 00_MB60_[GB]_1910UK_IDTV_PVR_BRONZE17_19942LED_YPBPR_10072630_5018xxxx.indd 38 00_MB60_[GB]_1910UK_IDTV_PVR_BRONZE17_19942LED_YPBPR_10072630_5018xxxx.indd 38 15.07.2011 13:38:23 15.07.2011 13:38:23[...]

English - 39 - Detachable Stand Uninstallation Method T o install the TV on the wall, fi rst of all, foot assembly should be removed. Unscrew the 4 screws that attach the foot assembly to the panel and remove the foot assembly from the panel. 00_MB60_[GB]_1910UK_IDTV_PVR_BRONZE17_19942LED_YPBPR_10072630_5018xxxx.indd 39 00_MB60_[GB]_1910UK_IDTV_PV[...]

English - 40 - Screw Dimensions L D Model D L Item Number Installation of the Screw LC-19LE510E LC-19LE510K Ø4 30 4 T o the wall M4 18 4 T o the product LC-22LE510E LC-22LE510K LC-22DV510E LC-22DV510K Ø4 30 4 T o the wall M4 18 4 T o the product LC-24LE510E LC-24LE510K LC-24DV510E LC-24DV510K Ø4 30 4 T o the wall M4 18 4 T o the product LC-32LE5[...]