Sharp LC-90LE745U manual

LC-90LE745U OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORA TION Printed in Mexico Imprimé au Mexique Impreso en México TINS-F501WJZZ 12P05-MX-NM ENGLISH FRANÇAIS ESP AÑOL IMPORT ANT : Please read this operation manual befor e starting operating th[...]

Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) Dimensional Drawings 78 15 / 32 (1992.96) *1 80 7 / 8 (2054) 48 61 / 64 (1243) 47 11 / 16 (1211) 1 17 / 64 (32) 29 1 / 32 (737) 25 9 / 16 (649) 15 3 / 4 (400) 7 7 / 8 (200) 23 5 / 8 (600) 15 5 / 16 (389) 18 5 / 32 (461) 6 25 / 32 ( 172) 2 11 / 16 (68) *2 4 37 / 64 (116) 3 45 / 64 (94) 17 3 / 3[...]

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “danger ous voltage” within the product's enclosure that may be of sufficient magnitude to constitu[...]

DECLARA TION OF CONFORMITY : SHARP LIQUID CR YST AL TELEVISION, MODEL LC-90LE745U This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interfer ence received, including interfer ence that may cause undesired o[...]

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This pr oduct has been engineered and manufactur ed with the highest priority on safety . However , impr oper use can result in electric shock and/or fir e. In order to pr event potential danger , please observe [...]

IMPORTANT SAFETY INSTRUCTIONS 4 • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to p[...]

IMPORTANT SAFETY INSTRUCTIONS 5 Caring for the front panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the front panel with a soft cloth (cotton, fl annel, etc.). To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry sheet type[...]

6 3D Glasses Prevention of accidental ingestion • Keep the accessory out of the reach of small children. Small children can accidentally swallow these parts. – If a child accidentally swallows any of these parts, seek immediate medical attention. Do not disassemble • Do not disassemble or modify the 3D Glasses except when recycling the batter[...]

7 Contents IMPORTANT INFORMATION ................... 1 - 2 DEAR SHARP CUSTOMER ....................... 3 IMPORTANT SAFETY INSTRUCTIONS ........ 3 - 6 Accessories ....................................... 8 Supplied Accessories .......................... 8 Optional Accessories ........................... 8 QUICK REFERENCE Attaching the Stand .........[...]

8 Accessories Supplied Accessories Make sure the following accessories are provided with the product. Remote control unit (x1) Page 10 Page 11 “AAA” size battery (x2) Stand unit (x1) AC cord (x1) 3D Glasses (x2) Connection guide (x1) Operation manual (x1) Page 10 Page 9 See pages 44 to 46 for details of the 3D Glasses and their accessories. •[...]

9 QUICK REFERENCE Attaching the Stand • Before attaching (or detaching) the stand, unplug the AC cord. • Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged. CAUTION • Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over. •[...]

10 QUICK INSTALLATION TIPS 1 Attach your antenna to the back of the television. (See page 11.) 2 Connect the AC plug for the television into the AC outlet. AC outlet • Place the TV close to the AC outlet, and keep the power plug within reach. • TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT TOUCH UN-INSULATED PARTS OF ANY CABLES WITH THE AC CORD CON[...]

11 Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use[...]

12 Part Names TV (Front/Side) Center Icon illumination (See page 35.) Remote control sensor *1 See pages 14, 19 and 27 for button operations. *2 This panel emits the infrared signal towards the 3D Glasses you wear when you view 3D images. Do not place anything between the 3D infrared emitter on the TV and the infrared receiver on the 3D Glasses. Wh[...]

13 1 18 19 20 21 4 3 2 5 23 24 8 7 6 9 25 26 28 29 15 14 13 12 11 10 16 17 27 22 30 1 POWER: Switch the TV power on or enter standby. (See page 19.) 2T V , STB , DVD•VCR , AUDIO: Switches the remote control for TV, STB, BD, DVD, VCR and AUDIO operation. (See pages 59 to 60 for details.) * To enter the code registration mode, you need to press an [...]

14 Introduction to Connections Types of Connection For connecting the TV to external equipment, use commercially available cables. • The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products. ■ Connecting to video equipment or a PC Image quality differs depending on the terminal used. To enjo[...]

15 Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. (See pages 14 and 23.) For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, a[...]

16 Connecting to External Equipment ■ When using a component cable (COMPONENT): • Blu-ray disc player • DVD player • HD cable/satellite set-top box COMPONENT OUT AUDIO-L (White) AUDIO-R (Red) Y (Green) P B (Blue) P R (Red) Audio cable Component video cable • To enjoy 1080p display capability, connect your external equipment using an HDMI-[...]

17 Connecting to External Equipment Connecting a Surround System/Audio System ■ When connecting an AV amplifi er for a surround system DIGITAL AUDIO INPUT OPTICAL HDMI IN HDMI OUT HDMI OUT HDMI-certified cable *1 HD cable/satellite set-top box Optical fiber cable *2 • Letting the TV output the audio to an AV amplifi er: *1 When you connect [...]

18 Connecting a PC Refer to page 67 for a list of PC signals compatible with the TV. ■ When using an HDMI cable (HDMI 1, 2, 3 or 4): HDMI OUT HDMI-certified cable • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the HDMI 2 terminal, connect a Ø 3.5 mm stereo minij[...]

19 Turning On/Off the Power POWER POWER (On/Standby) Press POWER on the TV or on the remote control unit to turn the power on. • The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perfo[...]

20 3 Press a / b to select the time zone where you are using the TV, and then press ENTER . Example CST MST PST AKST HAST EST • The time zone differs depending on the selected country. • The factory preset value is the time zone for the capital of the selected country. 4 Press a / b to select the Daylight Savings Time, and then press ENTER . Ma[...]

21 CH Search (Channel search) Channel auto search makes the TV look for all channels viewable in the set area. 8 When "Air" is selected in Antenna setting: Press c / d to select "Start", and then press ENTER . Cancel Start When "Cable" is selected in Antenna setting: 1 Press a / b to select "Analog & Digital S[...]

22 Completed 11 The settings confi rmation screen is displayed. Confi rm the information displayed on the screen, and then press ENTER . Examples of the settings confi rmation screen When one or more channel is received after "Antenna & Cable" was selected in step 6 and a search was carried out. OK Language : English Location &[...]

23 Direct Button Operation Changing Volume You can change the volume by pressing VOL k / l on the TV or on the remote control unit. • To increase the volume, press VOL k . • To decrease the volume, press VOL l . 20 Audio status Output device Output Select Fixed Variable Speaker Variable sound Mute • When “Output Select” is set to “Varia[...]

24 FLASHBACK Press FLASHBACK to switch to the previously tuned channel or previous input mode. • Press FLASHBACK again to switch back to the currently tuned channel. • FLASHBACK will not work if no channel has been changed after the TV is turned on. SmartCentral Allows you to directly activate various types of applications. 1 Press SmartCentral[...]

25 If stereo sound is diffi cult to hear. • Obtain a clearer sound by manually switching to fi xed mono-sound mode. You can change MTS as shown below to match the television broadcast signal. Press AUDIO to toggle between audio modes. Examples: when receiving MTS and SAP STEREO mode: STEREO MONO STEREO + SAP mode: ST(SAP) SAP(ST) MONO MAIN + SA[...]

26 Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE . • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. • You can sequen[...]

27 1 Guide display • This indicates the buttons that can be operated on the displayed screen. The guide display varies depending on the menu setting screen. • The operations for some selected items may be displayed in the operational guide bar at the bottom of the screen. 2 Item displayed in blue • This indicates the item currently selected. [...]

28 On-Screen Display Menu Menu Items 3D Setup ......................................... Page 49 AQUOS LINK Setup ........................ Page 62 Terminal Setting ................. Pages 33-34, 67 Audio Setup .......................... Page 33 PC input ................................ Page 67 Audio Select .......................... Page 67 Input Sk[...]

29 On-Screen Display Menu AV MODE (Changing Pic.Quality) The audio and video settings can be changed to suit the program or input content being watched. Select from the following AV modes. ■ When the input source is TV, COMPONENT, VIDEO 1 or 2: AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/ DYNAMIC(Fixed) ■ When the input source is PC IN or HDMI 1 to 4[...]

30 Color Temp. (Color Temperature) For a better white balance, use color temperature correction. High: White with bluish tone Mid-High: Middle: Mid-Low: Low: White with reddish tone White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature. R Gain (LO/HI)/G Gain (LO/HI)/B Gain (LO/HI) ■ Fine tuning t[...]

31 On-Screen Display Menu Audio Settings You can adjust the sound quality to your preference with the following settings. Example [Off] Clear V oice Menu Audio Settings Auto V olume [Off] Bass [0 ] a 15 b 15 T reble [0 ] a 15 b 15 Balance [ 0] L R 3D Surround [Off] Bass Enhancer [On] Reset Audio Settings 1 Press MENU to display the MENU screen, and[...]

32 Power Control Power control setting allows you to save energy. Power Control Menu Audio Only No Signal Off Power Saving No Operation Off [Disable] [Enable] [ Standard] Power Control Example 1 Press MENU to display the MENU screen, and then press c / d to select "Power Control". 2 Press a / b to select a specifi c adjustment item, and [...]

33 On-Screen Display Menu System Options Menu View Option System Options 3D Setup T erminal Setting AQUOS LINK Setup Menu Design Operation Lock Out [Off] Icon Light Up Setting Demo Mode System Options [On] Example 1 Press MENU to display the MENU screen, and then press c / d to select "System Options". 2 Press a / b to select a specifi c[...]

34 Input Skip This setting allows you to skip the TV, HDMI or PC IN Input ("TV", "PC IN", "HDMI 1", "HDMI 2", "HDMI 3" and "HDMI 4") on the Input Selection operation. Yes: Skips the input. No: Does not skip input. Input Label Lets you set the input terminal displayed when using the INPUT l[...]

35 Game Play Time This function displays the elapsed game time so you do not lose track of the time. To display the elapsed time, select "GAME" for the AV MODE before starting the game. On: The elapsed time is displayed every 30 minutes when you switch to GAME mode in external input mode. Off: No adjustment. Operation Lock Out This functi[...]

36 Initial Setup Example Menu EZ Setup Internet Setup Language DivX ® Setup Broadcasting Setup Individual Setup Wall Mount Audio Setup Initial Setup Initial Setup [No] [English] Reset 1 Press MENU to display the MENU screen, and then press c / d to select "Initial Setup". 2 Press a / b to select a specifi c adjustment item, and then pre[...]

37 Favorite CH (Favorite Channel Setting) This function allows you to program 4 favorite channels, in 4 different categories. By setting the favorite channels in advance, you can select your favorite channels easily. To register your favorite channel: Select "Register" and then press ENTER . Press a / b / c / d to select the position in t[...]

38 V-Chip V-CHIP is an electronic fi ltering device built into your TV. This tool gives parents a great degree of control over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your T[...]

39 Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes in[...]

40 On-Screen Display Menu Information Example Menu Identification Software Update Digital Caption Info. Netflix Help VUDU Help Information Information 1 Press MENU to display the MENU screen, and then press c / d to select "Information". 2 Press a / b to select a specifi c adjustment item, and then press ENTER . 3 Press a / b (or c / d[...]

41 ■ Updating the Software via the Network 1 Press a / b on the Manual Update screen to select "Network Update", and then press ENTER . • The TV connects to the network and checks for updates. • To cancel, press ENTER . Abort Connecting to Internet.. Checking for the latest software version.. Accessing.. 2 The current version of the[...]

42 3 Press ENTER to start checking the data in the USB memory device. Insert the USB memory device containing the software update file. OK 4 During the data checking, “Checking” blinks. Now checking the data in the USB memory device. Checking • The current version of the TV software and the version of the update fi le on the USB memory devi[...]

43 CAUTION • The 3D Glasses are precision equipment. Handle them with care. • Improper use of the 3D Glasses or failure to follow these instructions can result in eye strain. • If you experience dizziness, nausea, or other discomfort while viewing 3D images, immediately discontinue use of the 3D Glasses. Using the 3DTV with incompatible 3D br[...]

44 Enjoying 3D Image Viewing 3D Glasses Supplied Accessories for 3D Glasses Make sure the following accessories are provided with the 3D Glasses. Two sets of 3D Glasses are provided. 3D Glasses (×2) Pages 44 to 48 Nose pad *1 (small ×2, large ×2) Page 45 USB cable*2 (×2) Page 45 Glasses case (×2) Cleaning cloth (×2) *1 Use the 3D Glasses nose[...]

45 Enjoying 3D Image Viewing Attaching the Nose Pad Attach either of the supplied nose pads as needed (such as when the glasses do not fi t properly). The glasses come with a large and small nose pad. 1 1 2 Attaching the nose pad Removing the nose pad Using the 3D Glasses Turning the Power On/Off Slide the switch to 2D or 3D to turn on the power. [...]

46 Using the 3D Glasses with Power Supply If you slide the switch to 3D or 2D after taking steps 1 and 2 in Recharging the 3D Glasses (see page 45), you will be able to supply power to the 3D Glasses while using the glasses (battery will not be recharged). • Do not move around while wearing the 3D Glasses. Doing so may result in getting your feet[...]

47 Switching from 3D to 2D Mode 4 Press 3D during the 3D mode. Select “Yes” and press ENTER to switch to 2D mode. No Ye s • Take off the 3D Glasses and turn off the power. Ending 3D Image Viewing 5 Take off the 3D Glasses and turn off the power. • If the input signal switches to 2D, 2D images are displayed automatically. • 3D mode is canc[...]

48 Switching from 3D to 2D Mode 6 Press c / d to select the 2D signal type ( “Side by Side” or “Top and Bottom”) and then press ENTER . Select when two images are displayed next to each other . Side by Side T op and Bottom • If you select the same system as that of the input signal, 2D images are displayed. • Take off the 3D Glasses and[...]

49 3D Setup You can make various settings to enhance 3D image viewing. Menu View Option System Options System Options 3D Setup T erminal Setting AQUOS LINK Setup Example 1 Press MENU to display the MENU screen, and then press c / d to select “System Options”. 2 Press a / b to select “3D Setup”, and then press ENTER . 3 Press a / b to select[...]

50 Enjoying 3D Image Viewing • Appropriate 3D Glasses are required to view 3D images. Purchase 3D Glasses for use with Sharp brand 3D LCD TVs. ■ 3D Glasses lenses • Do not apply pressure to the lenses of the 3D Glasses. Also, do not drop or bend the 3D Glasses. • Do not scratch the surface of the lenses of the 3D Glasses with a pointed inst[...]

51 Specifi cations – 3D Glasses Enjoying 3D Image Viewing Product 3D Glasses Model number AN-3DG20 Lens type Liquid crystal shutter Power supply DC5V (supplied by a USB terminal of a Sharp LCD TV) Battery Lithium ion polymer rechargeable battery (DC3.7V 70mAh) Battery life* Approx. 30 hours of continuous use Charging time 90 minutes Dimensions ([...]

52 Enjoying Photo/Music/Video Playback You can connect the TV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy viewing pictures, listening to music, and watching videos. • Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the recorded data. • It may tak[...]

53 Selecting the Folders to Play Back • To play back data on a USB memory device, insert the USB memory device on the TV. USB mode is selected automatically. (Go to step 2) • Use the following procedure to switch back to USB mode after switching from USB mode to another mode. 1 Select "USB" or "Home Network (DLNA)" from INPU[...]

54 Enjoying Photo/Music/Video Playback Playing Back Files on a USB Memory Device/Home Network (DLNA) Server Photo Mode Viewing Thumbnails ... ... picture 5 picture 4 picture 2 picture 1 picture 3 Example This screen image is for the USB mode. It may be slightly different in the Home network (DLNA) mode. Buttons for thumbnail operations Buttons Desc[...]

55 Enjoying Photo/Music/Video Playback USB Menu On the menu to be displayed in USB mode, use a / b to select an item and make settings to your preferences. Remove USB Device [10sec] Select Slide Show Interval Select Slide Show BGM Set All Slide Show Image Reset All Slide Show Image [On] 3D Display USB MENU Example ■ 3D Display You can view photos[...]

56 Enjoying Photo/Music/Video Playback USB Menu On the menu to be displayed in USB mode, use a / b to select an item and make settings to your preferences. Set All Auto Play Reset All Auto Play USB MENU Remove USB Device Example * See page 55 for details on the Remove USB Device function. ■ Set/Reset All Auto Play Selecting "Set All Auto Pla[...]

57 ■ Using the operation panel You can use the operation panel for video playback operations. You can call up this operation panel by pressing MENU after you press a / b to select "USB Operation Panel"/"Home Network (DLNA) Operation Panel" from "System Options" > "View Option". Example Resume Audio CC Ti[...]

58 Example Menu EZ Setup Internet Setup Language DivX ® Setup Broadcasting Setup Individual Setup Initial Setup Initial Setup [English] DivX ® Setup This is the function to confi rm your registration code. You need to register the code at http://www.divx.com. 1 Press MENU to display the MENU screen. 2 Press c / d to select "Initial Setup&qu[...]

59 Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, BD, DVD, LD) using the presetting manufacturer function of your remote control unit. 14 12 11 6 13 10 8 9 7 5 4 3 2 1 Presetting manufacturer codes 1 Press an appropriate button ( STB , DVD • VCR or AUDIO ) to operate the [...]

60 Manufacturer codes Other Viewing Options AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MA THIS DBX EMERSON GE INST ANT REOL Y A JC PENNEY JVC KENWOOD MAGNA VOX MAGNIN MEMOREX MONTGOMER Y W ARD NEC P ANASONIC PENT AX PHILCO PHILIPS QUASAR REALISTIC SAMSUNG SHARP SONY SYL V ANIA T A TUNG TEAC TMK Y AMAHA 09 13 04 12 04 09 10, 13, 14 04 04 04 09, 16[...]

61 Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certifi ed cables to [...]

62 AQUOS LINK Setup Menu System Options AQUOS LINK Setup System Options AQUOS LINK Control [On] Auto Power On [Y es] [Auto] Selecting Recorder Channel Select Key Audio Return Channel Example 1 Press MENU to display the MENU screen, and then press c / d to select "System Options". 2 Press a / b to select “AQUOS LINK Setup”, and then pr[...]

63 Link Operation Menu Recorder Power On/Off Device Operation panel [By AQUOS SP] Play from Rec. List Show Start Menu Change Media of Device Link Booking (Rec. Book) Change Audio Output Device Change Surround Mode HDMI Device Selection AQUOS LINK Setup Link Operation Menu Link Operation Start Recording Stop Recording Link Operation Menu Link Operat[...]

64 Recorder Power On/Off You can manually turn on/off the power of the connected AQUOS LINK-compatible equipment. Each time you press ENTER , the connected equipment switches on or off. Device Operation Panel You can use the device operation panel to control playback operations. Press a / b / c / d to select the desired operation. • This function[...]

65 Using AQUOS LINK Using a Smartphone with the TV This function enables you to connect the TV to a smartphone that supports Mobile High-Defi nition Link (MHL) using an MHL-compatible cable. To connect the TV to your MHL-compatible smartphone, be sure to use an MHL-compatible cable (commercially available). • You can view pictures and video on a[...]

66 VIEW MODE You can select the screen size. 1 Press VIEW MODE . • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. • You can sequentially select a View Mod[...]

67 Using a PC Example Menu View Option T erminal Setting AQUOS LINK Setup 3D Setup Menu Design Ot i L k O t System Options System Options 1 Press MENU to display the MENU screen, and then press c / d to select "System Options". 2 Press a / b to select "Terminal Setting", and then press ENTER . 3 Press a / b to select "PC in[...]

68 • The TV can be controlled from a PC, control panels and other devices using the RS-232C or IP. • Use a cross-type RS-232C cable, ETHERNET cable (commercially available) or wireless LAN for the connections. • This operation system should be used by a person who is accustomed to using computers. AQUOS Remote Control Example Menu EZ Setup In[...]

69 ■ Command table • Commands not indicated here are not guaranteed to operate. CONTROL ITEM COMMAND P ARAMETER CONTROL CONTENTS POWER ON COMMAND SETTING POWER SETTING The Power On command rejected. It input-switches by the toggle. (It is the same as an input change key) It input-switches to TV . (A channel remains as it is. (Last memory)) Alth[...]

70 Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. • Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive online user support. (See page 72.) • You can enjoy a variety of streaming content and Internet applications. (See page 76.) • You may not be able to view [...]

71 Internet Setup Example Menu EZ Setup Internet Setup Language DivX ® Setup Broadcasting Setup Initial Setup Initial Setup [English] Connection Type 1 Press MENU to display the MENU screen, and then press c / d to select "Initial Setup". 2 Press a / b to select "Internet Setup", and then press ENTER . 3 Press a / b to select &[...]

72 Using the Internet Checking Your Internet Connection 1 Press SmartCentral to display the application window. 2 Press c / d to select "AQUOS ADVANTAGE LIVE", and then press ENTER . • If " " or " " is displayed after you connect to the Internet, check your TV's network settings and connection. • When the AQUO[...]

73 Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. • You can enter up to 128 characters for text. • Some special characters or diacritics may not be available depending on where you enter the text. Buttons Descripti[...]

74 Using the Browser ENTER , a / b / c / d • Press a / b / c / d to select a link that you want to jump, and then press ENTER . EXIT • Press the button to return to the TV screen. RETURN • Press the button to return to the previous page. D • Display the toolbar. About links • Web pages on the Internet often include “links” that allow [...]

75 Using the Toolbar You can use the toolbar to control the browser and to specify settings. 1 Press D to display the toolbar. 2 Press c / d to select a function, and then press ENTER . Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. 1[...]

76 Using the Internet Using Applications via the Internet By connecting the TV to the Internet, you can enjoy a variety of broadband content, including videos, music and photos. Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 40) or by visiting http://[...]

77 Example Menu Identification Software Update Digital Caption Info. Netflix Help VUDU Help Information Information Deactivating Netfl ix Function 1 Press MENU to display the MENU screen. 2 Press c / d to select "Information", and then press ENTER . 3 Press a / b to select "Netfl ix Help", and then press ENTER . 4 Press c / [...]

78 Enjoying Skype™ With Skype™ on your TV, you can enjoy large screen video calls. • It is free to create a Skype account and make Skype-to- Skype voice and video calls. • Skype is not a replacement for your telephone and cannot be used for emergency calls. • For detailed Skype information, please visit the following website: http://www.s[...]

79 6 Enter your "Full name", "Skype Name", "Password", and "Email" address. 7 Select "Create Account", and then press ENTER . Sign In to Skype 8 Enter your registered "Skype Name" and "Password". 9 Select "Sign in", and then press ENTER . • If you have signed in on th[...]

80 3 Select "Video call" on the Contacts Option menu, and then press ENTER . • If you want to make a voice call, select "Call". Contact Option menu Video call: Make a video call. Call: Make a voice call. View profi le: View the selected contact's profi le. Rename: Rename the selected person. Block/Unblock: Block/Unblock[...]

81 Using the Internet The following will be displayed when you get access to Skype for the fi rst time. Terms of Use PLEASE READ CAREFULLY 1. All Skype features are offered by Skype under the terms of the Skype end user license agreement . 2. You shall not promote, include, display, provide, or make available any content which: (a) may be consider[...]

82 Examples of Application Logos Using the Internet When you access the Internet application for the fi rst time, the following appears. • This message is available only in English. DISCLAIMERS • This SHARP device facilitates the access to content and services provided by third parties. The content and services accessible via this device belon[...]

83 Appendix Removing the Stand • Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket to mount it. Unfasten the four screws used to secure the stand in place. Detach the stand from the TV. 1 2 • In the installat[...]

84 Appendix Setting the TV on the Wall The wall mount kit (sold separately) allows you to mount the TV on the wall. For detailed information on installing the wall mount, see the instructions provided with the product. We recommend you to contact a technician for assistance when installing it. SHARP is not responsible for any damage to the product [...]

85 Appendix Troubleshooting Problem Possible Solution • No power • Check if you pressed POWER on the remote control unit. Page 19 • Is the AC cord disconnected? Page 10 • Has the power been turned on? Page 19 • Unit cannot be operated. • External infl uences such as lightning, static electricity, may cause improper operation. In this c[...]

86 Problem Possible Solution • No picture • Is connection to other components correct? Pages 14 to 18 and 61 • Is the correct input selected? Pages 14 and 23 • Is "On" selected in "Audio Only"? Page 32 • If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display o[...]

87 Trademarks • SmartCentral is a registered trademark of Sharp Corporation. • Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories. • "HDMI, the HDMI logo and High-Defi nition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC in the Unite[...]

TV Item Model: LC-90LE745U LCD panel Size 90 o Class (90 1 / 64 o Diagonal) Resolution 2,073,600 pixels (1,920 g 1,080) TV Function TV-standard (CCIR) American TV Standard ATSC/NTSC System Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terrestrial Broadcast (8VSB) 2-69ch Digital cable *1 (64/256 [...]

89 Wireless LAN This TV has received the following certifi cations. - Wi-Fi CERTIFIED™ (certifi cation program from the Wi-Fi Alliance ® ) - Wi-Fi Protected Setup™ (certifi cation program from the Wi-Fi Alliance ® ) FCC This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device[...]

90 ■ Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. ■ Software developed by SHARP and open source software The copyrights for the software components and various relevant documents included with this product that were devel[...]

91 libzzip Copyright © Guido Draheim guidod@gmx.de c-ares Copyright © 1998 by the Massachusetts Institute of Technology. Group 42 Portions copyright © 2000 Group 42, Inc. and the Contributing Authors. zlib Portions copyright © 1995-1996 Jean-loup Gailly and Mark Adler. RSA Data Security MD5.CPP - RSA Data Security, Inc., MD5 message-digest algo[...]

92 OpenSSL LICENSE ISSUES The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and the original SSLeay license apply to the toolkit. See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In case of any license issues related to OpenSSL please contact openssl-cor[...]

93 CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the “Product”), when shipped in its original container , will be free from defective workmanship and materials, and agr ees that it w ill, at its option, either repair the defect or r eplace[...]

94 LC-90LE745U_E.indb 94 LC-90LE745U_E.indb 94 2012/04/06 16:50:05 2012/04/06 16:50:05[...]

Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) Dimensional Drawings 78 15 / 32 (1992.96) *1 80 7 / 8 (2054) 48 61 / 64 (1243) 47 11 / 16 (1211) 1 17 / 64 (32) 29 1 / 32 (737) 25 9 / 16 (649) 15 3 / 4 (400) 7 7 / 8 (200) 23 5 / 8 (600) 15 5 / 16 (389) 18 5 / 32 (461) 6 25 / 32 ( 172) 2 11 / 16 (68) *2 4 37 / 64 (116) 3 45 / 64 (94) 17 3 / 3[...]

LC-90LE745U OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN SHARP ELECTRONICS CORPORA TION Sharp Plaza, Mahwah, New Jersey 07495-1163 SHARP CORPORA TION Printed in Mexico Imprimé au Mexique Impreso en México TINS-F501WJZZ 12P05-MX-NM ENGLISH FRANÇAIS ESP AÑOL IMPORT ANT : Please read this operation manual befor e starting operating th[...]