Sharp LTV-19w3 manual

19” Widescreen LCD TV Model L TV -19w3[...]

1 T able of Contents IMPOR T ANT PRODUCT SAFETY INSTRUCTIONS ..................................................................................... 2 Antenna Installation Safety .................................................................................................... .............................. 4 Cleaning the LCD TV ...................[...]

2 IMPORTANT PRODUCT SAFETY INSTRUCTIONS Read carefully and follow all warnings and instructions in this User's Manual and those marked on the product before you operate your television. Failure to follow warnings can result in personal injury or damage to product. Keep this User’s Manual in a convenient location for future reference. Proper [...]

3 To assure proper ventilation, do not block the openings by placing the LCD TV on a bed, sofa, rug or other similar surface. Do not place it in a built-in installation, such as a bookcase or an enclosed rack, unless proper ventilation is provided. Other Notices and Precautions Caution : Never remove the rear cover. There are no user serviceable pa[...]

4 Antenna Installation Safety Outdoor Antenna Grounding If an outside antenna or cable system is connected to the LCD TV, be sure the antenna or cable system is grounded so as to prevent voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANS/NFPA 70, provides information with regard to proper grounding of the m[...]

5 Safety Guidelines Warning: This device must be operated with the original power supply, part number: VQ176222:1 CAUTION: The socket-outlet should be installed near the equipment and should be easily accessible. CAUTION: Use a power cable that is properly grounded. Always use the appropriate AC cord that is certified for the individual country. So[...]

6 Installation Congratulations on your purchase of a Westinghouse 19” wide screen LCD TV. Sleek and practical, this lightweight LCD TV delivers a crisp, vibrant picture and doubles as a superb WSXGA+ computer monitor —making it a practical solution for tight spaces in the office, bedroom, or kitchen. Watch television, play video games, e-mail, [...]

7 2. Attach Base Stand to LCD TV Attach the base st and to the LCD TV st and neck. Align the holes and tabs, press and snap into place.[...]

8 3. Connect Antenna, Cable, Video, S-Video, YPbPr, DVI, and/or VGA Cables Connect video and audio cables from compatible devices to the back panel of the LCD TV. D V I V G A ( D - S U B ) A u d i o R / L Y P b P r Line Out Video Audio L/R S-V ideo RF[...]

9 4. Connect Power Cable Connect the DC power adapter cord to the LCD TV and then connect the female AC power cord to the adapter. Plug the AC power cord into a properly grounded AC outlet. 5. Turn Power On Press the power button on the right side of the LCD TV or on the remote control. The LED light will turn blue if signal input is detected, oran[...]

10 6. Programming TV Channels 1. Select TV as the input using the Source button on the remote. 2. Press the Menu button to display the OSD Display Menu. 3. Use the CH Ÿ / ź arrow keys to highlight the TV Menu. 4. Using the Vol Ź arrow keys select the TV sub-menu. Use the ź to highlight the CH Auto Scan function. Press Vol Ź arrow key and Chann[...]

1 1 Controls & Connections This section describes the side panel controls, and remote control in more detail. Front View of the Product Use the buttons on the right side panel control to display and adjust the On Screen Display (OSD). The OSD controls are explained at the bottom of the page and are defined in the “OSD Functions” section. Bu[...]

12 Remote Control The Remote Control should be used within 3 meters of the LCD TV. 1. Mute Switch the sound between on & off 2. MTS(Multi-channel TV Sound) Stereo and Mono selection 3. Sleep Use to shut off TV after a period of time 4. Power Switch the power between on & off 5. Display Display the channel information 6. PIP Available in D-S[...]

13 OSD Functions This section describes each on-screen display (OSD) command. There are different OSD menus depending on whether you are in TV, Video (AV/S-Video/YPbPr) or PC (D-Sub/DVI) mode. All the function settings for your LCD TV are controlled either via the remote control or using the control keys located on the right of the front panel of t[...]

14 Audio Menu In the Audio Menu use the Vol Ź to select Audio sub-menu. Use CH Ÿ / ź to highlight function then use the Vol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu. Function Name Explanation Vo l u m e Vo l u m e a d j u s t m e n t Mute T urn Audio Off and On T reble Treble adjustment Bass Bass[...]

15 TV Menu In the TV Menu use the V ol Ź to select TV sub-menu. Use CH Ÿ / ź to highlight function then use the V ol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu. Function Name Explanation T uner System Select between STD, HRC, IRC, Air CH. Auto Scan S tart to scan channel after pressing right or lef[...]

16 Function Name Explanation Language English, Chinese, François, Español OSD T ransparency Set OSD transparency level OSD Time-out Set the time to turn of f the OSD automatically OSD Position OSD horizontal/vertical position adjustment Reset Restore factory default settings Sleep Set the Sleep timer for 30, 45, 60, 90, or 120 minutes Power LED T[...]

17 Rating Menus Press the V-Chip button on the remote control to access the Parental Control Menu. Enter the PIN code. Use the ź to highlight the Movie (MPAA) or TV (TVPG) menu. Use the Ź to select the sub-menu. Use the Ÿ / ź to highlight the Movie/TV Rating to be blocked or un-blocked. Press the MENU button to set and press EXIT to exit the V-[...]

18 PC OSD Menu Image Menu In the Image Menu use the V ol Ź to select image sub-menu. Use CH Ÿ / ź to highlight function then use the V ol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu.. Function Name Explanation Brightness Brightness adjustment. Default value is 100. Contrast Contrast adjustment. Defa[...]

19 Audio Menu In the Audio Menu use the Vol Ź to select Audio sub-menu. Use CH Ÿ / ź to highlight function then use the Vol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu. Function Name Explanation Vo l u m e Vo l u m e a d j u s t m e n t Mute T urn Audio Off and On T reble Treble adjustment Bass Bass[...]

20 Miscellaneous Menu In the Misc Menu use the Vol Ź to select Misc sub-menu. Use CH Ÿ / ź to highlight function then use the Vol Ż / Ź arrow keys to change the values of the functions that are selected in the OSD menu. Function Name Explanation Language English, Chinese, François, Español OSD T ransparency Set OSD transparency level OSD Tim[...]

21 PC DVI OSD Menu PC OSD Menu for DVI Source has the same features as PC D-Sub except, only Brightness, Contrast, and Sharpness can be adjusted in the Image sub-Menu. PIP function Menu Picture In Picture (PIP) is available in D-Sub mode only . When pressing the PIP Menu button on the remote control the following menu appears. Pressing the PIP butt[...]

22 If in Analog mode and the Display settings are not compatible with or are out of range of the LCD TV/Monitor the following will be displayed: Appendix Specifications Preliminary Product Specification Panel Size/T ype 19” wide screen Color TFT LCD. Anti-st atic and hard coated. Native/Optimum Resolution 1440x900 Aspect Ratio 16:10 Response Time[...]

23 Video Features Progressive scan Motion adaptive 3D de-interlacing 3D noise reduction Inverse 3:2 pull down Aspect Ratio Adjustment (Normal/Full/Zoom) Dynamic Luminance Control (DLC) Function Video Enhancement (Brightness/Contrast/Sharpness/Saturation/Hue) Picture-in-Picture in D-Sub/DVI/YPbPr mode Audio Features Built in audio amplifier and spea[...]

24 improper connection • The red connector for right audio is easily confused with the red Pr connector in YPbPr component video input. Double check that they are correctly attached. • Remove distribution amplifiers from the signal path Snow appears on screen • Check your antenna connection • Remove unnecessary signal splitters to improve s[...]

S E-U M-1904-0501 Santa Fe Springs, CA[...]