Sharp TINS-E517WJZZ manual

LC-40LE820UN/LC-46LE820UN/LC-52LE820UN/LC-60LE820UN OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ENGLISH FRANÇAIS ESP AÑOL IMPORT ANT : Please read this operation manual before starting operating the equipment. IMPORT ANT : V euillez lire ce mode d'emploi avant de commencer à utiliser l'appar eil. IMPORT ANTE : Lea este ma[...]

Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) Dimensional Drawings LC-52LE820UN LC-60LE820UN AN-52AG4 6 15 / 64 (158) 1 35 / 64 (39) 13 25 / 64 (340) 4 11 / 64 (106) 2 41 / 64 (67) 1 35 / 64 (39) 49 5 / 8 (1260) 25 23 / 32 (653) 19 1 / 16 (484) 15 3 / 4 (400) AN-52AG4 56 21 / 32 (1439) 52 17 / 32 (1334.2) 38 25 / 64 (975) 35 61 / 64 (913)[...]

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. WARNING: The lightning flash with arrow-head symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “danger ous voltage” within the product's enclosure that may be of sufficient magnitude to constitu[...]

INFORMA TION: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable protection against harmful interfer ence in a residential installation. This equipment generates, uses and can radiate radio frequency ener gy and, if n[...]

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly handled. This pr oduct has been engineered and manufactur ed with the highest priority on safety . However , impr oper use can result in electric shock and/or fir e. In order to pr event potential danger , please observe [...]

IMPORTANT SAFETY INSTRUCTIONS 4 • Outdoor Antenna Grounding — If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA 70, provides information with regard to p[...]

IMPORTANT SAFETY INSTRUCTIONS 5 Caring for the Liquid Crystal panel • Turn off the main power and unplug the AC cord from the wall outlet before handling. • Gently wipe the surface of the display panel with a soft cloth (cotton, fl annel, etc.). To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/ [...]

6 Contents IMPORTANT INFORMATION ..................... 1 Trademarks ....................................... 2 DEAR SHARP CUSTOMER ....................... 3 IMPORTANT SAFETY INSTRUCTIONS ........ 3 - 5 Supplied Accessories ............................ 7 QUICK REFERENCE Attaching the Stand ............................ 7 QUICK INSTALLATION TIPS ......[...]

7 1 Confi rm that there are 9 screws (5 short screws and 4 long screws) supplied with the stand unit. 2 Attach the supporting post for the stand unit onto the base using the box for the stand unit as shown below. The supporting post attaches to the base at an off- centered location on the base. Be sure to attach the supporting post in the directio[...]

8 QUICK REFERENCE Using the Remote Control Unit Use the remote control unit by pointing it towards the remote control sensor on the TV. Objects between the remote control unit and the remote control sensor may prevent proper operation. 30º 30º 30º 30º 17´ (5 m ) Remote control sensor ■ Cautions regarding the remote control unit • Do not ex[...]

9 Antennas To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector, plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use [...]

10 Part Names TV (Front) *1 OPC: Optical Picture Control *2 See pages 17 and 22 for using the touch sensor panel. Center Icon illumination (See page 30.) POWER *2 INPUT VOL l / k MENU Remote control sensor OPC sensor *1 (See page 24.) CH V / U TV (Rear) RS-232C terminal Antenna/Cable in INPUT 1 terminals DIGITAL AUDIO OUTPUT terminal INPUT 6 termin[...]

11 1 19 20 21 22 4 3 2 5 24 25 8 7 6 9 26 27 29 30 31 16 15 14 13 12 11 10 17 18 28 23 Part Names 1 POWER: Switch the TV power on or enter standby. (See page 17.) 2 TV , STB , DVD•VCR , AUDIO: Switches the remote control for TV, STB, DVD, BD, VCR and AUDIO operation. (See pages 41 to 42 for details.) * To enter the code registration mode, you nee[...]

12 Introduction to Connections Experiencing HD Images An HDTV without an HD source is just an ordinary TV. To enjoy HD images on the TV, you should get HD programming from the following: Over-the-air broadcasting via HD quality antenna HD cable/satellite subscription HD compatible external equipment For information on updating to HD programming, as[...]

13 Connecting to External Equipment You can connect many types of external equipment to your TV. To view external source images, select the input source from INPUT on the remote control unit or on the TV. (See pages 12 and 19.) For connecting the TV to external equipment, use commercially available cables. CAUTION • To protect equipment, always t[...]

14 Connecting to External Equipment ■ When using Component cable (INPUT 1): • Blu-ray disc player • DVD player • HD cable/satellite set-top box COMPONENT OUT Back panel horizontal inputs AUDIO-R (Red) AUDIO-L (White) Y (Green) P B (Blue) P R (Red) Audio cable Component video cable • To enjoy 1080p display capability, connect your external[...]

15 Connecting to External Equipment Connecting an Audio Amplifi er ■ When using optical fi ber cable: It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 28 for details.) PCM audio outputs from the terminal. DIGITAL AUDIO INPUT OPTICAL Back panel vertical inputs Optical fiber cable • Depending on the connected[...]

16 Connecting a PC Refer to page 48 for a list of PC signals compatible with the TV. ■ When using HDMI cable (INPUT 4, 5, 6 or 7): HDMI OUT Back panel vertical inputs HDMI-certified cable • Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certifi ed cable to the INPUT 4 (HDMI) terminal,[...]

17 Turning On/Off the Power Press POWER on the TV or on the remote control unit to turn the power on. • The Initial Installation starts when the TV powers on for the fi rst time. If the TV has been turned on before, the Initial Installation will not be invoked. For changing the settings of the Initial Installation, perform "EZ setup" o[...]

18 Direct Button Operation MUTE Mutes the current sound output. Press MUTE . • " " will be displayed on the screen for 30 minutes, and the sound is silenced. • Within 30 minutes of pressing MUTE , mute can be canceled by pressing VOL k / l or MUTE . • Mute will be canceled after 30 minutes have passed. However, the TV will not sudde[...]

19 INPUT To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV. 1 Press INPUT . The CH List screen displays. 2 Press a / b or press INPUT again to select the input source. An image from the selected source automatically displays. Each time INPUT is pressed, the input source toggles. If the[...]

20 DOCK Allows you to directly activate various types of applications. • See pages 37, 51 and 57 for details of viewable applications. • You can display the DOCK by choosing "DOCK" on the menu items. (See page 28.) • When this function is not available, "Can not operate this function now" will display. POWER SAVING Allows [...]

21 Direct Button Operation VIEW MODE You can select the screen size. 1 Press VIEW MODE . • The View Mode menu displays. • The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. • You can sequen[...]

22 1 Guide display • This indicates the buttons that can be operated on the displayed screen. The guide display varies depending on the menu setting screen. • The operations for some selected items may be displayed in the operational guide bar at the bottom of the screen. 2 Item displayed in blue • This indicates the item currently selected. [...]

23 On-Screen Display Menu Menu Items System Options View Option ...................................... Page 28 View Mode ............................ Page 28 Freeze ................................... Page 28 Change Audio ....................... Page 28 Change CC ........................... Page 28 DOCK ................................... Page 28 A[...]

24 On-Screen Display Menu AV MODE (Changing Pic.Quality) The audio and video settings can be changed to suit the program or input content being watched. Select from the following AV modes. ■ When the input source is TV, INPUT 1 or 2 terminals: AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/ DYNAMIC(Fixed) ■ When the input source is INPUT 3, 4, 5, 6 or 7[...]

25 Color Temp. (Color Temperature) For a better white balance, use color temperature correction. High: White with bluish tone Mid-High: Middle: Mid-Low: Low: White with reddish tone White balance can be adjusted between a maximum of +30 and a minimum of –30 for each color temperature. R Gain (LO/HI): –30 through +30 G Gain (LO/HI): –30 throug[...]

26 On-Screen Display Menu Audio Settings You can adjust the sound quality to your preference with the following settings. Example Menu Audio Settings Auto V olume [Off] Bass [ 0] a 15 b 15 T reble [ 0] a 15 b 15 Balance [ 0] L R Surround [Off] [Off] Bass Enhancer [On] Reset Clear V oice Audio Settings 1 Press MENU to display the MENU screen, and th[...]

27 Power Control Power control setting allows you to save energy. Power Control Menu Audio Only No Signal Off Power Saving No Operation Off [Disable] [Disable] [ Standard] Power Control Example 1 Press MENU to display the MENU screen, and then press c / d to select "Power Control". 2 Press a / b to select a specifi c adjustment item, and[...]

28 On-Screen Display Menu System Options Menu View Option Input T erminal Setting AQUOS LINK Setup Menu Design Operation Lock Out [Off] Icon Light Up Setting Demo Mode System Options System Options Example 1 Press MENU to display the MENU screen, and then press c / d to select "System Options". 2 Press a / b to select a specifi c adjustm[...]

29 Output Select Allows you to select what controls the audio output. Fixed: Sound via speaker is adjusted with VOL k / l on the remote control unit or VOL l / k on the TV. Sound via the AUDIO OUT terminal is not adjustable and outputs at a consistent level. Variable: Sound via the AUDIO OUT terminal is adjusted with VOL k / l on the remote control[...]

30 Icon Light Up Setting When this function is set to "On", the LED on the front of the TV turns on. • "On" is the factory preset value. If you want to turn off the LED, set the function to "Off". Demo Mode You can select the image from several types of demo mode. 4 Color LCD/AQUOS Net/Feature Demo/Auto Play If you s[...]

31 Broadcasting Setting CH Setup If Initial Installation does not memorize all the channels in your region, follow the instructions below to manually memorize the channels. Air/Cable: Make sure what kind of connection is made with your TV when selecting "Air" or "Cable". CH Search: Channel auto search makes the TV look for all c[...]

32 Parental CTRL (Parental Control Setting) Status Used to enable or disable the parental control function. This function will not be selectable from the menu if you do not fi rst confi gure your secret number. On: Enables Parental CTRL. Off: Disables Parental CTRL. V-Chip V-CHIP is an electronic fi ltering device built into your TV. This tool g[...]

33 Canadian Rating Systems (Canadian English ratings and Canadian French ratings) • The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission (CRTC) policy on violence in television programming. • While violence is the most important content element to be rated, the structure developed takes in[...]

34 On-Screen Display Menu Information Menu Identification Software Update Digital Caption Info. Netflix Help Information Information Example 1 Press MENU to display the MENU screen, and then press c / d to select "Information". 2 Press a / b to select a specifi c adjustment item, and then press ENTER . 3 Press a / b (or c / d ) to sele[...]

35 ■ Updating the Software via the Network 1 Press c / d on the Manual Update screen to select "Network Update", and then press ENTER . The TV connects to the network and checks for updates. To cancel, press ENTER . Abort Connecting to Internet.. Checking latest version of Firmware.. Accessing.. 2 The current version of the TV and the l[...]

36 3 Press ENTER to start checking the data in the USB memory device. Insert the USB memory device containing the software update file. OK 4 During the data checking, “Checking” blinks. Now checking the data in the USB memory device. Checking • The current version of the TV software and the version of the update fi le on the USB memory devi[...]

37 Enjoying Photo and Music Playback You can enjoy viewing photos and listening to music from external USB memory devices. Depending on the USB memory device, the TV may not be able to recognize the recorded data. Use only alphanumeric characters for naming fi les. File names over 80 characters (may vary depending on character set) may not be disp[...]

38 Enjoying Photo and Music Playback Photo Mode Viewing Thumbnails ... ... picture 5 picture 4 picture 2 picture 1 picture 3 Example Buttons Description ENTER Display the photo. a / b / c / d Select a desired item. RETURN Return to the previous process. A (red) Select the images to be displayed. Press this button to add or remove a checkmark. B (gr[...]

39 Enjoying Photo and Music Playback Select Slide Show BGM You can select the music to be played in the background while the slide show is being displayed. 1 Press D to display the USB MENU screen. 2 Press a / b to select "Select Slide Show BGM", and then press ENTER . • The list screen is displayed. • You can display the list screen [...]

40 Enjoying Photo and Music Playback Music Mode ... ... music 5 music 4 music 2 music 1 music 3 SONG_01.MP3 SONG_02.MP3 SONG_03.MP3 SONG_04.MP3 SONG_05.MP3 SONG_06.MP3 SONG_07.MP3 3:42 4:55 4:08 4:20 3:55 4:26 4:35 SONG_03.MP3 0:14 / 4:35 Example Buttons Description ENTER Play music. a / b / c / d Select a desired item. RETURN Return to the previou[...]

41 Presetting Remote Control Function You can operate the connected AV products (AV receiver, cable box, SAT tuner, DTV, VCR, DVD, BD, LD) using the presetting manufacturer function of your remote control unit. 14 12 11 6 13 10 8 9 7 5 4 3 2 1 Presetting manufacturer codes 1 Press an appropriate button ( STB , DVD • VCR or AUDIO ) to operate the [...]

42 Manufacturer codes Other Viewing Options AUDIO DYNAMICS BROCKSONIC CANON CRAIG CURTIS MA THIS DBX EMERSON GE INST ANT REOL Y A JC PENNEY JVC KENWOOD MAGNA VOX MAGNIN MEMOREX MONTGOMER Y WARD NEC P ANASONIC PENT AX PHILCO PHILIPS QUASAR REALISTIC SAMSUNG SHARP SONY SYL VANIA T A TUNG TEAC TMK Y AMAHA 09 13 04 12 04 09 10, 13, 14 04 04 04 09, 16, [...]

43 Using AQUOS LINK Controlling HDMI Equipment Using AQUOS LINK What’s AQUOS LINK? • Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate compatible system equipment (Blu-ray disc equipment, AV amplifi er, DVD). • By connecting AQUOS LINK-compatible devices with HDMI-certifi ed cables to [...]

44 AQUOS LINK Setup Menu System Options AQUOS LINK Setup System Options AQUOS LINK Control [On] Auto Power On [Y es] [Auto] Selecting Recorder Channel Select Key Audio Return Channel Example 1 Press MENU to display the MENU screen, and then press c / d to select "System Options". 2 Press a / b to select “AQUOS LINK Setup”, and then pr[...]

45 Link Operation Menu Recorder Power On/Off Device Operation panel [By AQUOS SP] Play from Rec. List Show Start Menu Change Media of Device Link Booking (Rec. Book) Change Audio Output Device Change Surround Mode Choosing Operating Device AQUOS LINK Setup Link Operation Menu Link Operation Turning On/Off AQUOS LINK-compatible Equipment You can man[...]

46 Using the Device Operation Panel You can use the device operation panel to control playback operations. 1 Press OPTION to display the Link Operation Menu screen. 2 Press a / b to select “Device Operation Panel”, and then press ENTER . 3 Press a / b / c / d to select the desired operation. This function works only when AQUOS LINK-compatible e[...]

47 VIEW MODE You can select the screen size. 1 Press VIEW MODE . The View Mode menu displays. The menu lists the View Mode options selectable for the type of video signal currently being received. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. You can sequentially select a View Mode that has i[...]

48 Using a PC 1 Press MENU to display the MENU screen, and then press c / d to select "System Options". 2 Press a / b to select “Input Terminal Setting”, and then press ENTER . 3 Press a / b to select “PC input”, and then press ENTER . 4 Press a / b to select a specifi c adjustment item, and then press ENTER to set each item. 5 P[...]

49 ■ PC control of the TV • Attach an RS-232C cable cross-type (commercially available) to the supplied Din/D-Sub RS-232C for the connections. This operation system should be used by a person who is accustomed to using computers. ■ Communication conditions Set the RS-232C communication settings on the PC to match the TV's communication c[...]

50 Up to four devices can be connected to the HN-VA400U adapter. Model number Number of ports HN-VA401SU 4 + 1 HN-VA400U 4 HN-VA100U 1 Internet Using the Internet By connecting your TV to a broadband system, you can access the Internet from the TV. Display the “Sidebar Widget” on the screen to check out the latest Internet information and acces[...]

51 Using the Internet H If you cannot connect to the Internet Perform the procedures below to check your TV's network settings. Ethernet Setup 1 Press EXIT to display the normal TV screen. 2 Press MENU to display the MENU screen, and then press c / d to select “Initial Setup”. 3 Press a / b to select “Internet Setting”, and then press [...]

52 Entering Text (Software Keyboard) When you are editing an input screen or specifying the Ethernet settings used for accessing the Internet, enter text from the software keyboard. You can enter up to 128 characters for text. • Buttons Description a Moves the focus up. When the focus is at the top edge, this moves the focus to the opposite edge [...]

53 Using the Browser ENTER , a / b / c / d • Press a / b / c / d to select a link that you want to jump, and then press ENTER . EXIT • Press the button to return to the TV screen. RETURN • Press the button to return to the previous page. Example : The image shown below, which is only for explanation, is subject to change. About links Web page[...]

54 Using the Toolbar You can use the toolbar to control the browser and to specify settings. 1 Press D on the remote control unit to display the toolbar. 2 Press c / d to select a function, and then press ENTER . Selected item Description Displays the linked page in a new tab. Displays the Tab menu. Returns to the previous page. Goes back to the or[...]

55 Saving the URL of the Current Page Adding a web page to your bookmarks allows you to return to that page later by simply selecting it from your list of bookmarks. 1 Display the page that you want to bookmark. 2 Press D on the remote control unit to display the toolbar. 3 Press c / d to select “ ” in the toolbar, and then press ENTER . 4 Sele[...]

56 Browser Settings You can check or modify your browser settings from the Browser menu. The Browser menu includes a display settings menu and a security settings menu. 1 Press D to display the toolbar. 2 Press c / d to select “ ” in the toolbar, and then press ENTER . 3 Press c / d to select the settings menu you want to access. 4 Press a / b [...]

57 Using the Internet Instantly Watching Movies from Netfl ix Please check that the most current software is loaded on TV by selecting "Auto Update Setting" on "Software Update" (see page 34) or by visiting http://www.sharpusa.com/products/support/ to check for a download of the newest software version. This function allows you[...]

58 6 Using your PC, visit http://www.netfl ix.com/activate, and then enter the activation code displayed in step 5. The screen of the PC After a period of time, the TV will be activated, and the empty instant Queue screen will be displayed. Adding Content to the Instant Queue 7 To add a movie to the instant Queue of the TV, select the "Add to[...]

59 Using the Internet VIEW MODE You can select the screen size. 1 Press VIEW MODE . The View Mode menu displays. 2 Press VIEW MODE or a / b while the View Mode menu is displayed to select a desired item on the menu. You can sequentially select a View Mode that has its own aspect ratio. You can have the same settings by choosing "View Mode"[...]

60 • To attach the stand, perform the above steps in reverse order. Unfasten the four screws used to secure the stand in place. Detach the stand from the TV. 13 Appendix Removing the Stand • Before detaching (or attaching) the stand, unplug the AC cord. CAUTION • Do not remove the stand from the TV unless using an optional wall mount bracket [...]

61 • Detach the cable clamp on the rear of the TV when using the optional mount bracket. • Due to the terminal confi guration on this TV, when you wall-mount this model, make sure there is enough space between the wall and the TV for the cables. • To use this TV mounted on a wall, remove the AC cord holder and the screws at the 4 locations o[...]

62 Appendix Troubleshooting Problem Possible Solution No power • Check if you pressed POWER on the remote control unit. Page 17 Is the AC cord disconnected? Page 8 Has the power been turned on? Page 17 • • • Unit cannot be operated. • External infl uences such as lightning, static electricity, may cause improper operation. In this case, [...]

63 Problem Possible Solution No picture • Is connection to other components correct? Pages 12 to 16 and 43 Is the correct input selected? Pages 12 and 19 Is "On" selected in "Audio Only"? Page 27 • If the PC image is not displayed, check the following: - When connecting a laptop PC to the TV, check that display output mode o[...]

Item Model: LC-40LE820UN Model: LC-46LE820UN LCD panel Size 40 o Class (40 o Diagonal) 46 o Class (45 63 / 64 o Diagonal) Resolution 2,073,600 pixels (1,920 g 1,080) TV Function TV-standard (CCIR) American TV Standard ATSC/NTSC System Receiving Channel VHF/UHF VHF 2-13ch, UHF 14-69ch CATV 1-135ch (non-scrambled channel only) Digital Terrestrial Bro[...]

Optional Accessory The listed optional accessory is available for the Liquid Crystal Television. Please purchase it at your nearest shop. • Additional optional accessories may be available in the near future. When purchasing, please read the newest catalogue for compatibility and check the availability. Part name Model number Wall mount bracket A[...]

66 Information on the Software License for This Product Software composition The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties. Software developed by SHARP and open source software The copyrights for the software components and various relevant documen[...]

67 CONSUMER LIMITED WARRANTY SHARP ELECTRONICS CORPORA TION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display pr oduct (the “Product”), when shipped in its original container , will be free from defective workmanship and materials, and agrees that it w ill, at its option, either repair the defect or r eplace[...]

Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) Dimensional Drawings LC-40LE820UN LC-46LE820UN 11 13 / 16 (300) 1 35 / 64 (39) 4 59 / 64 (125) 10 27 / 32 (275) 3 5 / 16 (84) 4 27 / 32 (123) 1 35 / 64 (39) 39 3 / 32 (993) 17 47 / 64 (450) 35 1 / 16 (890.6) 15 59 / 64 (404) 27 27 / 32 (707) 5 13 / 64 (132) 11 13 / 16 (300) 15 3 / 4 (400) 1 35[...]

Unit: inch (mm) Unité: pouce (mm) Unidad: pulgada (mm) Dimensional Drawings LC-52LE820UN LC-60LE820UN AN-52AG4 6 15 / 64 (158) 1 35 / 64 (39) 13 25 / 64 (340) 4 11 / 64 (106) 2 41 / 64 (67) 1 35 / 64 (39) 49 5 / 8 (1260) 25 23 / 32 (653) 19 1 / 16 (484) 15 3 / 4 (400) AN-52AG4 56 21 / 32 (1439) 52 17 / 32 (1334.2) 38 25 / 64 (975) 35 61 / 64 (913)[...]

LC-40LE820UN/LC-46LE820UN/LC-52LE820UN/LC-60LE820UN OPERA TION MANUAL MODE D'EMPLOI MANUAL DE OPERACIÓN ENGLISH FRANÇAIS ESP AÑOL IMPORT ANT : Please read this operation manual before starting operating the equipment. IMPORT ANT : V euillez lire ce mode d'emploi avant de commencer à utiliser l'appareil. IMPORT ANTE : Lea este man[...]