Sharp XE-A147 manual

ELECTRONIC CASH REGISTER FULL DETAILED INSTRUCTION MANUAL SHARP ELECTRONICS (Europe) GmbH Postbox 105504 20038 Hamburg, Germany XE-A137/XE-A147 MODEL XE-A137 XE-A147[...]

CAUTION: The ca sh reg ister should be se curely fitte d to t he sup portin g plat form t o avoi d inst abilit y when the d rawer is open. CAUTION: The socket-outlet shall be installed near the equipment and shall be easily accessible. VORSICHT: Die Netzsteckdose muß nahe dem Gerät angebracht und leicht zugänglich sein. ATTENTION: La prise de co[...]

1 INTRODUCTION Thank you very much for your purchase of the SHARP Electronic Cash Register , Model XE-A137/XE-A147. Please read this manual carefully before operating your machine in order to gain full understanding of functions and features. Please keep this manual for future reference. It will help you if you encounter any operational problems. C[...]

2 CONTENTS INTRODUCTION ........................................................................................................................................... 1 IMPORT ANT .................................................................................................................................................. 1 CONTENTS ...............[...]

3 ADV ANCED FUNCTION PROGRAMMING ................................................................................................ 52 1 Register Number and Consecutive Number Programming ................................................................ 52 2 V arious Function Selection Programming 1 ....................................................[...]

4 P ARTS AND THEIR FUNCTIONS 1 External View Plug the AC adapter connector into the AC adapter jack, then plug the AC adapter into the wall outlet. Cheque slot Printer cover Display Mode switch RS-232 connector (Only for the XE-A147) Option battery shutter (for the XE-A1BT) (Only for the XE-A147) SD card slot (Important: For SD type card SDHC 4GB t[...]

5 3 Mode Switch and Mode key Insert the mode key (the same key as drawer lock key) into the mode switch and move the key to get an appropriate mode. Mode key : T urns the display off. No operations are possible. REG: Permits transaction entry . : Permits correction after finalizing a transaction. X/Flash: Permits printing of sales reports and displ[...]

6 5 Display ■ Operator display Y our cash register is equipped with a front LED (Light-Emitting Diode) display that affords easy visibility of 9 digits for the operator during transaction. PLU/Subdepartment code Department code Repeat Receipt off (“.”) Shift for the character entry (“_”) DC for the character entry (“_”) Amount: Appear[...]

7 PREP ARING THE CASH REGISTER Unpack the cash register and make sure all accessories are included. For details of accessories, please refer to “SPECIFICA TIONS” section. For installing the cash register , find a stable surface near an AC outlet where the cash register will not subject to water sources or direct sunlight. For preparing the cash[...]

8 2 Installing Batteries Three new alkaline batteries LR6 (“AA”size) must be installed in the cash register to prevent the data and user- programmed settings from being erased from the memory , when the AC adapter plug is accidentally disconnected or in case of power failure. Once installed, the batteries will last approximately one year before[...]

9 3 Installing a Paper Roll The register can print receipts. For the printer , you must install the paper roll provided with the register . NOTE   Insta ll the pa per ro ll in the pr int er .Be ca ref ul the nt os et the ro ll and cu tt he pap er end co rre ctl y . To the printer Incorr[...]

10 HELP FUNCTION The help function allows you to print guidance messages for basic programming procedures of the cash register . This function is available in any mode switch position other than “ ”. For more details on each programming, refer to “BASIC FUNCTION PROGRAMMING” on pages 1 1 to 21. ■ Printing the help menu Press the E key to [...]

1 1 BASIC FUNCTION PROGRAMMING Before starting sales entries, you must first program necessary items so the cash register suits your sales needs. In this manual, there are three sections, BASIC FUNCTION PROGRAMMING (pages 1 1-21) where required items must be programmed , AUXILIARY FUNCTION PROGRAMMING (pages 45-51) for using all available keyboard [...]

12 ■ Guidance for text programming The register allows you to program texts for department item names, PLU/subdepartment item names, logo messages, foreign and domestic currency symbols, and function texts. There are two ways for programming text; using character keys on the keyboard or entering character codes with numeric keys on the keyboard. [...]

13 3 Language Selection 88 T o set "0 " s @ A *L a ng uag e ( 0 - 4) *Language: 0: English 1: German 2: French 3: Spanish 4: Swedish By default, English is set. Key operation example Print s 88 @ 0 A Caution:   When you ch ang e t he lan gua ge, th e t ext s s uch as lo go mes sag es and fu nct ion te xts , whi ch you pro gra mme d,[...]

14 5 T ax Programming If you program the V A T/tax, the cash register can calculate the sales tax. In the V A T system, the tax is included in the price you enter in the register , and the tax amount is calculated when tendered according to the V A T rate programmed. In the tax system, the tax is calculated when tendered according to the tax rate p[...]

15 6 Department Programming Merchandise can be classified into a maximum of 8 departments. Items sold using the department keys can later be printed on a report shown as the quantities sold and sales amounts classified by department. The data is useful for making purchasing decisions and other store operations. ■ Department status Fo r d ept . 5 [...]

16 ■ Preset unit price Fo r d ept . 5 thr oug h 8 T o pr o gr am z er o T o pr ogr a m ano t h er de p art me nt De pt. ke y A H Un it pr ic e (m ax. 8 d ig it s) Key operation example Print 1000 ! A Unit price NOTE   Ifa dep art men ti sn ot pro gra mme dt oa llo wt he ent ry of pre set un it pri ces [...]

17 ■ HALO digits (entry digit limit) Set the number of allowable digits for the maximum entry amount for each department. The limit is ef fective for operations in the REG mode. NOTE   T oact iva te thi sf unc tio n, the pr ogr amm ing (j ob cod e6 2) “HA LO fun cti on” mu st be set “V alid[...]

18 7 PLU (Price Look-Up) and Subdepartment Programming The PLU function allows speedy key entries whereby a price is automatically called up when a code is entered. The subdepartment is a kind of “open PLU”, which requires you to enter a price after the PLU code is entered. PLU/subdepartment setting for 1 through 200 codes are available. ■ Un[...]

19 ■ PLU text (item label) T o ke ep cu rre n t s et t in g 1 02 PL U c o de Ch a ra cte r e n tr y (m ax . 1 2 ch ara ct er s) T o pr ogr am an o th e r P LU co de T o p rog r am fo l lo win g PLU c ode A s p @ s Key operation example Print s 102 @ 1 p MELON s A (Programming MELON to PLU1) Text programmed for PLU code 1 For details of the text e[...]

20 8 T ext Programming Please refer to “Guidance for text programming” section as for how to entering characters. ■ Logo messages (6 lines and 30 characters for each line) The register can print programmed messages on every receipt. On the standard model, a header 3-line and footer 3-line logo message is printed on the receipt. If you want to[...]

21 T o print the logo message “THANK YOU” using double sized characters and centering on the third line. Key operation example Print s 104 @ 3 @ W S W S W S W T W H W A W N W K W S W Y W O W U s A For details of the text entry , please refer to the “Guidance for text programming ” on page 12. (T :9 , H:7 , A:0 , N:3 , K:0 , Y :4 , O:4 , U:0[...]

22 BASIC SALES ENTR Y (Example) 1 Basic Sales Entry Listed below is a basic sales entry example when selling items by cash. For operation details, please refer to “Additional Information for BASIC SALES ENTRY” on page 29. Modeswitchsetting 1. T urn the mode switch to the REG position. Itementries 2. Enter the price for the approp[...]

23 2 PLU Sales Entry Enter a PLU code using numeric keys and press the p key . Key operation example Operator display Receipt print 1 p 71 p 141 p 3620 p A[...]

24 CORRECTION 1 Cancellation of the Numeric Entry If you make an incorrect numeric entry , you can clear the entry by pressing the l key only before pressing a department key , PLU/subdepartment key or the % key . 2 Correction of the Last Entry (direct void) If you make an incorrect entry relating to a department, PLU/subdepartment or percentage ( [...]

25 3 Correction of the Next-to-last or Earlier Entry (indirect void) Y ou can void any incorrect department entry , PLU/subdepartment entry or item refund entry made during a transaction if you find it before finalizing the transaction (e.g. pressing the A key). This function is applicable to department, PLU/subdepartment and refund entries only . [...]

26 5 Correction after Finalizing a T ransaction (V oid mode) When you need to void incorrect entries that are found after finalizing a transaction or cannot be corrected by direct, indirect void or subtotal void, the following steps should be taken: 1. T urn the mode switch to the position using the mode key , to enter into the void mode. 2. [...]

27 FULL SALES REPORT (X or Z REPORT) • Use the reading function (X) when you need to take a reading of sales information entered since the last reset. Y ou can take this reading any number of times. It does not affect the register ’s memory . • Use the resetting function (Z) when you need to clear the register ’s memory . Resetting prints a[...]

28 ■ Periodic consolidation (X2 or Z2 report) Put the mode key in the mode switch and turn it to the X/Flash or the Z/PGM position. Key operation H A (For Z2 report: in the Z/PGM position) Sample report Mode title*1 Reset counter of daily total Reset counter of periodic consolidation Grand total *2 The subsequent printouts are the same in format [...]

29 OTHER BASIC SALES ENTRIES 1 Additional Information for BASIC SALES ENTR Y Receipt ON/OFF function When you use the printer to issue receipts, you can disable receipt printing in the REG mode to save paper using the receipt ON/OFF function. T o disable receipt printing, press the @ key . This key toggles the receipt printing status ON and OFF . T[...]

30 3 Starting Cash Memory (SCM) Entry If you enter the amount of currency for the starting amount in the drawer before entry operations, you can separate that amount from the sales amount when reports are generated. Y our register can be programmed to enforce the entry of starting cash into memory . 1. T urn the mode switch to the X/Flash positi[...]

31 4 Item Entries ■ Single item entries Department entries Enter a unit price and press a department key . If you use a programmed unit price, press a department key only . Department key Unit price * 1 (max. 8 digits) When using a programmed unit price H * 2 NOTE  *1 Les st han th ep rog ram med up per li mit am oun ts[...]

32 PLU/subdepartment entries Enter a PLU code and press the p key . If you do not use a programmed unit price, you need to enter a unit price after pressing the p key (subdepartment). By default, these 200 codes are set to PLU mode and zero for unit price. • PLU entries PLU code p When zero price PLU is entered, only the sales quantity is added. [...]

33 ■ Multiplication entries Use this feature when you need to enter two or more of the same items. This feature helps you when you sell a large quantity of items. Department key Q’ty Unit price Unit price Subdepartment (open PLU) entry PLU entry Dept. entry PLU code PLU code When you use a programmed unit price p p p @ • Q’ty: Up to four-di[...]

34 ■ Single item cash sale (SICS) • This function is useful when a sale is for only one item and is for cash; such as a pack of cigarettes. This function is applicable only to those departments that have been set for SICS or to their associated PLUs. • The transaction is finalized and the drawer opens as soon as you press the department key o[...]

35 6 Finalization of T ransaction ■ Cash or cheque tendering Press the s key to get a subtotal, enter the amount tendered by your customer , then press the A key if it is a cash tender or press the C key if it is a cheque tender . When the amount tendered is greater than the amount of the sale, the register will show the change due amount with th[...]

36 ■ Cash or cheque sale that does not need any tender entry Enter items and press the A key if it is a cash sale or press the C key if it is a cheque sale. The register will display the total sales amount. Example Key operation Print 300 # 10 p A In the case of cheque sale NOTE  Whe nt he fun cti on par ame ter si sp rog ram me[...]

37 ■ Mixed-tender sale Example Key operation Print s 950 A c NOTE  Pre ss the  C k ey in pla ce of the  A k ey whe ny our cu sto mer ma kes pa yme nt by che que s. 7 Computation of V A T (V alue Added T ax)/T ax ■ V A T/tax system The cash register may be programmed for the following six V A T/[...]

38 Manual tax 1 through 4 system (Manual entry method using programmed percentages) s t This system provides the tax calculation for taxable 1, taxable 2, taxable 3, and taxable 4 subtotals. This calculation is performed using the corresponding programmed percentages when the t key is pressed just after the s key . After this calculation, you must [...]

39 OPTIONAL FEA TURES 1 Auxiliary Entries ■ Percent calculations (premium or discount) • Y our register provides percent calculations for a subtotal or each item entry depending on the programming. • Percentage: 0.01 to 100.00% Percent calculation for a subtotal Example Key operation Print $ $ s % A Percent calculation for item entries Exampl[...]

40 2 Auxiliary Payment T reatment ■ Currency exchange Y our register allows payment entries in foreign currency . Press the V key to create a subtotal in foreign currency . V l A c Reentry Amount tendered (max. 8 digits) For direct finalization After an entry is completed or After the amount tendered is found smaller than the sales amount in a sa[...]

41 ■ Received-on-account entries When you receive on account from a customer , use the R key . For the received-on-account (RA) entry , enter the amount, and press the R key . NOTE  Cas ht end eri ng onl ya vai lab le for RA ope rat ion . Example Key operation Print 12345 s 4800 R ■ Paid-out entries When you pay an amount t[...]

42 3 Special Printing Function ■ After transaction receipt In the OFF state (no receipting) of receipt ON-OFF function, the transaction receipt can be issued during item registrations or after finalizing a transaction (finalizing payment operations), press the R key to print it. However , the receipt printing is prohibited during payment operatio[...]

43 PRIOR T O PROGRAMMING ■ Procedure for programming 1. Check to see whether a paper roll is present in the machine. If there is not enough paper on a roll, replace it with a new one (refer to “Replacing the Paper Roll” in “OPERA TOR MAINTENANCE” chapter on page 78 for the replacement). 2. Put the mode key in the mode switch and tur[...]

44 ■ Alphanumeric character code table *(DC) : Double-size character code[...]

45 AUXILIAR Y FUNCTION PROGRAMMING 1 Miscellaneous Key Programming The cash register provides miscellaneous keys such as % , R , t , V , C , c and A . ■ Rate for % and V Rate (max. 9 digits) % V A To program another rate To program zero Rate: XXXXX: 0.00 − 100.00 (% rate) (For example: 15.00%. enter 1500.) XXXXXXXXX: 0.000000 − 999.999999 (Cu[...]

46 ■ Function parameters for % ABC % @ A To program again To program “0” for all items Item: Selection: Entry: A +/- sign + (premium) sign 0 - (discount) sign* 1 B Item % Allow* 0 Disallow 1 C Subtotal % Allow* 0 Disallow 1 +/- sign • Programming of the +/- sign assigns the premium or discount function. Item % • Percent calculation for th[...]

47 ■ Function parameters for V AB A To program “0” for all items @ V To program again Item: Selection: Entry: A V key function Allow* 0 Disallow 1 B Position of decimal point (from right: tab) 0-3 (default: 2) Example Key operation Print 02 @ V A From left, AB[...]

48 ■ Function parameters for R , t , C , c and A key function ABC A To program “0” for all items To program for another key * 1 :Press s key for A key setting. @ s , C , c , R or t * 1 Item: Selection: Entry: A Footer printing* 2 Allow 1 Disallow* 0 B Amount tendered entry* 2 Compulsory 1 Non-compulsory (for C and A )* 0 Inhibit (for c )* 0 C[...]

49 2 Other T ext Programming Please refer to “Guidance for text programming” on page 12 or “Entering character codes with numeric keys on the keyboard” on page 43 as for how to entering characters. ■ Foreign currency symbol (4 characters) Foreign currency symbol for the V key is printed with a foreign currency exchange amount obtained usi[...]

50 ■ Function text (12 characters) s @ 103 @ *Function no. (max. 2 digits) Character entry (max. 12 characters) A To keep the current setting s To program another function text * Function no.: See “List of function texts” shown on the following page. Example Key operation Print s 103 @ 25 @ CARD s A Programming “CARD” for credit (C:2 , A:[...]

51 ■ List of function texts Function no. Key or function Default setting 1 % % 2 Differ DIFFER 3 T axable 1 subtotal T AX1 ST 4 T axable 2 subtotal T AX2 ST 5 T axable 3 subtotal T AX3 ST 6 T axable 4 subtotal T AX4 ST 7 V A T/tax 1 V A T 1 8 V A T/tax 2 V A T 2 9 V A T/tax 3 V A T 3 10 V A T/tax 4 V A T 4 1 1 T otal tax TTL T AX 12 Net without t[...]

52 ADV ANCED FUNCTION PROGRAMMING 1 Register Number and Consecutive Number Programming The register number and consecutive numbers are printed on every receipt. When your store has two or more registers, it is practical to set separate register numbers for identification. The consecutive number is increased by one each time a receipt is issued. For[...]

53 2 V arious Function Selection Programming 1 The cash register provides various detailed functions listed below . • Print format • Receipt print format • Others For this programming, the job code entry style is applied. Y ou can continue programming until you press the A key for the programming described in this section. T o continue progra[...]

54 ■ Receipt print format Job code: 7 Item: Selection: Entry: A Always enter 0. 0 B Always enter 0. 0 C Subtotal print with a press of subtotal key No* 0 Y es 1 D Always enter 0. 0 E V A T/tax amount print Y es* 0 No 1 F T axable amount print Y es* 0 No 1 G Net amount print Y es* 0 No 1 H Purchase no. print Y es* 0 No 1 ■ Other programming Job [...]

55 Job code: 62 Item: Selection: Entry: A HALO function Invalid* 0 V alid 1 B Always enter 0. 0 C Always enter 0. 0 D Buffered keyboard Y es* 0 No 1 E Always enter 0. 0 F Printing of void mode in X2/Z2 report Y es* 0 No 1 G Printing of void mode in X1/Z1 report Y es* 0 No 1 H Addition to the hourly total in VOID mode No* 0 Y es 1 Job code: 63 Item:[...]

56 Job code: 64 Item: Selection: Entry: A Printing of GT1 on Z report Y es* 0 No 1 B Printing of GT2 on Z report Y es* 0 No 1 C Printing of GT3 on Z report Y es* 0 No 1 D Always enter 0. 0 E Printing of Z counter on Z report Y es* 0 No 1 F Printing of DA T A on PLU resetting report Y es* 0 No 1 G Resetting of GT1, 2, 3 at the general Z1 report No* [...]

57 Job code: 67 Item: Selection: Entry: A Rounding amount printing No* 0 Y es 1 B T otal amount rounding when a transaction is finalized directly by C or c key Rounding* 0 Not rounding 1 C Rounding up of the unit digit of amount 0 - 9 (default: 0) D Rounding down of the unit digit of amount 0 - 9 (default: 0) E Application of rounding Item and paym[...]

58 Job code: 68 Item: Selection: Entry: A Printing data on EJ Z report No 0 Y es* 1 B Always enter 0. 0 C T emporary EJ printing during a transaction Disable 0 Enable* 1 D Always enter 0. 0 E PGM mode operation records type Details* 0 Header information only 1 F REG/VOID modes operation records type Details* 0 T otal 1 G Compressing printing for EJ[...]

59 Job code: 69 Item: Selection: Entry: A Always enter 0. 0 B Always enter 0. 0 C Always enter 0. 0 D Rounding of foreign currency for V Rising to unit* 0 Round off (4 down/5 up) 1 E T ax system Auto tax 1-4 0 Auto V A T 1-4* 1 Manual V A T 1-4 2 Manual V A T 1 3 Manual tax 1-4 4 Auto V A T 1 & Auto tax 2-4 5 F T ax print when taxable subtotal [...]

60 Job code: 16 (Control unit (only available in specific countries)) Item: Selection: Entry: A T ype Cash Control Unit (G&D)* 0 Clean Cash (RI) 1 B T ransmission speed .(bps) 9600* 0 19200 1 38400 2 C - H Inhibited - - ■ Miscellaneous data Data s To set “0” s @ A Job code To program another job code Job code: 71 (GT2) Data: GT2 (max. 13 [...]

61 3 V arious Function Selection Programming 2 The cash register provides various options so you can use the register to suit your sales needs. In this section, you can program the following features (parameters within parentheses indicate default setting): • Power save mode (entering the power save mode after 30 minutes) • Logo message print f[...]

62 ■ Save SD function ABCD s To set “0000” s @ A 15 To program another job code Item: Selection: Entry: A Save all RAM data in the SD card at general Z1 report No* 0 Y es 1 B Save sales data in the SD card at general Z1 report No* 0 Y es 1 C Save Electronic Journal data in the SD card at general Z1 report Not to save EJ data and not to clear*[...]

63 4 EURO Programming For details of EURO migration operation, please refer to “EURO MIGRA TION FUNCTION”. ■ EURO system settings A s To set “0000” s 8 @ ABCD To program another job code Item: Selection: Entry: A Printing exchange total amount and change amount on receipt No* 0 Y es 1 B Always enter 0. 0 C Cheque and credit operation when[...]

64 ■ Automatic EURO modication operation settings @ s A AB To set “00” s 12 To program another job code Item: Selection: Entry: A Converting the preset unit price of Dept./PLU in the automatic modification operation for EURO (job #800 in the Z/PGM mode) Y es* 0 No 1 B Automatic modification operation for EURO (job #800 in the Z/PGM mode) a[...]

65 ■ Time setting for EURO modication operation s A Time (Hour) (00-23) @ s 14 To set all zeros To program another job code Example Key operation Print s 14 @ 10 s A NOTE  If you ha ve alr ead ym ade th eJ ob #80 0o per ati on wit ht he sub sti tut ion of 3 for “A ”i nt he Z/P GM [...]

66 5 Reading Stored Programs The machine allows you to read every program stored in the Z/PGM mode. ■ Key sequence for reading stored program Report name Key sequence Programming report 1 1 A Programming report 2 2 A Printer density programming report 3 A Department programming report 4 A PLU programming report (Assigning a range) 5 A (Full readi[...]

67 Programming report 2 Department programming report Job code A to H from the left Domestic currency symbol Language selection Dept. function D e pt . c o d e D e pt . t e x t Dept. unit price w/sign Tax status PLU programming report PLU/subdepartment selection PL U c ode PL U t ext Unit price Associated dept. code Printer density programming repo[...]

68 READING (X) AND RESETTING (Z) OF SALES T OT ALS • Use the reading function (X) when you need to take a reading of sales information entered since the last reset. Y ou can take this reading any number of times. It does not affect the register ’s memory . • Use the resetting function (Z) when you need to clear the register ’s memory . Rese[...]

69 2 Daily Sales T otals For the sample reports of the full sales and periodic consolidation report, refer to “FULL SALES REPORT (X or Z REPORT)” on page 27-28. ■ PLU report by designated range • Sample report PLU code Mode title* Item label Report title Range Range sum Sales q'ty and total ■ Hourly report • Sample report Mode titl[...]

70 EJ REPORT READING AND RESETTIN G The cash register provides an electronic journal (EJ) function. This function is intended to record the journal data in a memory instead of journal paper , and print the data as an EJ report. The register records the journal data in REG, , X/Flash, and Z/PGM modes. By default, a maximum of 3000 lines are stored i[...]

71 EURO MIGRA TION FUNCTION NOTE  EUR Op rog ram min gd esc rib ed in thi ss ect ion ar ef or use rs in the co unt rie s whi ch wil lj oin to th e mem ber so ft he Eur ope an Cur ren cy Uni on, no tf or the us ers in th ec oun tri es alr ead yh ave ?[...]

72 The details of the register system modification are as shown below: Items A=1 (EURO status 1) A=2 (EURO status 2) A=3 (EURO status 3) General Z1 report Issue Issue Issue General Z2 report Issue Issue Issue GT memories (GT1, GT2 and GT3) - Clear Clear*1 Conversion of preset prices of Dept./ PLU - Y es Y es*1 Exchange amount printing for total and[...]

73 Checking the current EURO status Y ou can check the EURO status currently set on the cash register . T urn the mode switch to the X/Flash position, and perform the following sequence. The current EURO status will be printed on the receipt. A @ 800 EURO status ■ Optional Programming for the Introduction of EURO Some programming relating with th[...]

74 SD CARD FUNCTION The register ’s data can be saved to the SD memory card, and the programming data can be loaded from the SD memory card. T o use the SD card function, turn the mode switch to the Z/PGM position and perform the corresponding operations. ■ Inserting and removing an SD memory card The SD card slot is located on the right side o[...]

75 ■ Data saving The sales data, EJ data or programming data can be saved to the SD card. s A @ s *Job no. *Job no. Saving data 141 All programming data 144 All RAM data 650 Sales data 750 EJ data (save and clear) ■ Data loading The sales data, EJ data or programming data can be saved to the SD card. s A @ s *Job no. *Job no. Loading data 147 A[...]

76 OPERA T OR MAINTENANCE 1 In Case of Power Failure When power is lost, the machine retains its memory contents and all information on sales entries. (Note: Three alkaline batteries must be installed.) • When power failure is encountered in register idle state or during an entry , the machine returns to normal operation after power recovery . ?[...]

77 4 Replacing the Batteries This cash register displays a low battery symbol ( ) when the batteries are low , and displays a no battery symbol ( ) when batteries are extremely low or batteries are not installed. When the low battery symbol is displayed, replace the batteries with new ones as soon as possible. The existing batteries will be dead in[...]

78 5 Replacing the Paper Roll Be sure to use paper rolls specified by SHARP . The use of any other paper rolls other than those specified could cause paper jamming, resulting in register malfunction. Paper specification Paper width: 57.5 ± 0.5 mm Max. outside diameter: 80 mm Quality: High quality (0.06 to 0.08 mm thickness) • Be sure to set the [...]

79 6 Removing a Paper Jam Caution: The paper cutter is mounted on the printer cover . Be careful not to cut yourself. Never touch the printer head immediately after printing, as the head may still be hot. Print roller arm 1. Remove the printer cover . 2. Lift up the print roller arm. (When a large roll paper is set, hold the both side of the print [...]

80 8 Removing the Drawer 1 Coin case Lever Lever 2 The drawer in the register is detachable. After closing your business for the day , remove the drawer . T o detach the drawer , pull it forward fully , and while holding the lever down, lift the drawer slightly and remove. The 6-denomination coin case is detachable. 9 Opening the Drawer by Hand Lev[...]

81 BEFORE CALLING FOR SER VICE The malfunctions shown in the left-hand column below , labeled “Fault”, do not necessarily indicate functional faults of the machine. It is therefore advisable to refer to “Checking” shown in the right-hand column before calling for service. Fault Checking (1) The display shows symbols that do not make sense. [...]

82 SPECIFICA TIONS Model: XE-A137 XE-A147 Dimensions: 335 (W) x 360 (D) x 190 (H) mm Weight: Approx. 5 kg Power Source: Official (nominal) voltage and frequency Power Consumption: Stand-by: 1.9 W (The of ficial voltage: 220 to 230V [50Hz/60Hz] and 230 to 240 V [50 Hz]) Operating: 8.1 W (The official voltage: 220 to 230 V [50Hz/60Hz] and 230 to 240 [...]

CAUTION: (only for the XE-A147) Shield ed int erface cable s must be us ed wit h this equip ment t o main tain c omplia nce wi th EMC regul ations . XE-A137 Noise level LpA: 56.4 dB(A-weig hted) Measured according to EN ISO 7779:2001 [Maximum value if the cash drawer springs ope n LpAI: 71.4 d B(A-weighted)] XE-A147 Noise level LpA: 53.0 d B(A-weig[...]

ELECTRONIC CASH REGISTER FULL DETAILED INSTRUCTION MANUAL SHARP ELECTRONICS (Europe) GmbH Postbox 105504 20038 Hamburg, Germany XE-A137/XE-A147 MODEL XE-A137 XE-A147[...]