Sharp XG-C465X manual

DA TA PR OJECT OR MODEL XG-C465X XG-C435X OPERA TION MANU AL Introduction Quic k Start Setup Connections Basic Operation Useful Features Appendix[...]

IMPOR T ANT • For your assistance in reporting the loss or theft of your Projector , please recor d the Model and Serial Numbers located on the bottom of the projector and r etain this information. • Before r ecycling the packaging, please ensure that you have checked the contents of the carton thoroughly against the list of “Supplied accesso[...]

-1 Introduction Before using the pr ojector , please read this operation man ual carefully . There ar e two important reasons for prompt warranty r egistration of your new SHARP Projector , using the REGISTRA TION CARD packed with the projector . 1. W ARRANTY This is to assure that you immediately r eceive the full benefit of the parts, service and[...]

-2 W ARNING: The cooling fan in this projector continues to r un for about 90 seconds after the projector enters the standby mode. During normal operation, when putting the projector into standby mode always use the ST ANDBY button on the projector or on the r emote control. Ensur e the cooling fan has stopped before storing the pr ojector in the s[...]

-3 Introduction -42 Picture Picture Mode Contrast Bright Red Blue CLR T emp Reset Signal Type COMP .1 Standard 7500K Auto SEL./ADJ. RETURN ENTER END 0 0 0 0 Using the Menu Screen Menu Selections Example: Adjusting “Bright” • This operation can also be performed by using the b uttons on the projector. Menu icons MENU button MOUSE/Adjustment bu[...]

-4 Contents Preparing Switching the Eco+Quiet Mode .......................... 36 Selecting the Picture Mode ............................... 36 Resize Mode ...................................................... 37 Using the Remote Control as the Wir eless Computer Mouse ........................................ 39 Useful Features Menu Items .........[...]

-5 Introduction Reference Appendix Maintenance ................................................. 55 Replacing the Air Filter ................................ 56 Replacing the Air Filter ...................................... 56 Maintenance Indicators ............................... 58 Regarding the Lamp .................................... 60 Lamp [...]

-6 PDF operation manuals in several languages are included in the CD-ROM, so that you can w ork with the pr ojector . T o utilize these manuals, you need to install Adobe ® Reader ® on your computer (Windows ® or Macintosh ® ). Please download Adobe ® Reader ® from the Inter net ( http://www .adobe .com). Accessing the PDF Manuals For Windows[...]

-7 Introduction 1. Read Instructions All the safety and operating instructions should be read befor e the product is operated. 2. Retain Instructions The safety and operating instructions should be retained for future r eference. 3. Heed Warnings All warnings on the product and in the operating instructions should be adhered to. 4. Follow Instructi[...]

-8 Ensur e that you read the following safeguar ds when setting up your pr ojector . Caution concerning the lamp unit ■ Potential hazard of glass par- ticles if lamp ruptures. In case of lamp rupture, contact your nearest Shar p A uthorized Pro- jector Dealer or Service Cen- ter for replacement. See “Replacing the Lamp” on page 60 . Caution c[...]

-9 Introduction Caution regar ding usage of the projector ■ When using the projector , t a ke care not to sub- ject it to hard impact and/or vibration, as this can result in damage. T ak e e xtra care with the lens. I f yo u are not to use the projector for a long time, mak e cer tain you unplug the power cord from the wall outlet, and disconnect[...]

-10 Accessories Remote control <RRMCGA623WJSA> Tw o R-6 batteries (“AA” size, UM/SUM-3, HP-7 or similar) Po wer cord * F or U .S., Canada, etc. (6' (1.8 m)) <QACCD A007WJPZ> F or Europe , except U .K. (6' (1.8 m)) <QACCV A011WJPZ> * Use the power cord that corresponds to the w all outlet in y our countr y . ■ 3 RCA[...]

-11 Introduction Optional lenses ■ Lens Projection distance for 100" screen size Wide-zoom lens ( × 1.5 – 1.9) AN-C12MZ 9'11" – 12'5" (3.0 m – 3.8 m) T ele-zoom lens ( × 2.2 – 2.8) AN-C18MZ 14'10" – 18'10" (4.5 m – 5.7 m) T ele-zoom lens ( × 3.3 – 5.1) AN-C27MZ 22' – 33'11&[...]

-12 42 MENU button For displa ying adjustment and setting screens. 43 46 AUTO SYNC button For automatically adjusting images when connected to a computer. ENTER button For setting items selected or adjusted on the menu. 32 KEYSTONE button For entering the Keystone Correction mode. 30 STANDBY/ON button For turning the power on and putting the projec[...]

-13 Introduction Projector (Rear View) * Using the Kensington Lock • This projector has a Kensington Security Standard connector for use with a Kensington MicroSaver Security System. Refer to the information that came with the system for instructions on how to use it to secure the projector . 55 Intake vent Carrying handle 15 Remote control senso[...]

-14 Remote Control 30 ST ANDBY button For putting the projector into standby mode . 32 KEYST ONE button For entering the K eystone Correction mode. 35 FREEZE button For freezing images . 35 MA GNIFY (Enlarge/Reduce) buttons For enlarging/reducing part of the image. 43 39 ENTER button For setting items selected or adjusted on the menu. 36 BREAK TIME[...]

-15 Introduction Using the Remote Control Inserting the Batteries 1 Pull down the tab on the cover and remove the cover towards the di- rection of the arro w . 2 Insert the included batteries. • Insert the batteries making sure the po- larities correctly match the and marks inside the battery compartment. 3 Insert the lower tab of the cover into [...]

-16 Quick Start 7 ST ANDBY button 3 ON button 6 COMPUTER 1 button 37 ST ANDBY/ON button 6 INPUT buttons 6 ENTER button 4 Height Adjustment buttons 5 Zoom knob 5 Focus ring 4 Tilt dial Page 18 1. Place the pr ojector facing a screen Pa g es 23, 30 Pag e 3 0 On the remote control On the projector This section shows the basic operation (projector conn[...]

-17 Quick Start Pag es 31, 32 4. Adjust the angle 5. Adjust the focus and the zoom Pag e 3 3 7. Tu rn the Power off Pag e 3 0 6. Select the INPUT mode Pag e 3 4 • • • • • This projector is equipped with an “Auto Keystone Correction” function that automatically corrects any trapezoidal distortion within the projected image. Bring the p[...]

-18 Setting Up the Projector For optimal image quality , position the projector perpendicular to the screen with the pr ojector’ s feet flat and level. Doing so will eliminate the need for Keystone correction and pr ovide the best image quality . (See page 32 .) Standard Setup (Front Projection) ■ Place the projector at the required distance fr[...]

-19 Setup Projection (PRJ) Mode The projector can use an y of the 4 projection modes, shown in the diagram below . Select the mode most appro- priate for the pr ojection setting in use. (Y ou can set the PRJ mode in “ Options2” me n u. See page 52 .) ■ Ta b le mounted, front projection ■ Ceiling mounted, front projection [Menu item ➞ “F[...]

-20 Storing the Projector Lens cap Fixing band Info How to Use the Storage Case When storing the projector , attach the lens cap to the lens, and place it in the supplied storage case. 1 Open the co ver of the storage case. 2 Place the projector into the stor - ag e case . • Ensure the projector has cooled down sufficiently bef ore placing it in [...]

-21 Connections Samples of Cables for Connection •F or more details of connection and cables, ref er to the operation manual of the connecting equipment. •Y ou may need other cab les or connectors not listed below . T erminal on the projector COMPUTER/ COMPONENT 1, 2 DVI-D AUDIO (for COMPUTER/ COMPONENT 1, 2, DVI-D) D VI-D COMPUTER/ COMPONENT 1[...]

-22 T erminal on the projector AUDIO (for COMPUTER/ COMPONENT 1, 2, DVI-D) AUDIO (for VIDEO, S-VIDEO) MONIT OR OUTPUT AUDIO (MONIT OR OUT) Equipment Audio-visual equipment Monitor Amplifier T erminal on connected equipment Audio output terminal T erminal for using the dedicated cable Audio output terminal T erminal for using the dedicated cable RGB[...]

-23 Connections Connecting to a Computer Before connecting, ensure the power cor d of the projector fr om the A C outlet is unplugged, and that the devices to be connected are turned off . After making all connections, turn on the projector and then the other de vices. When connecting a computer , ensure that it is the last device to be turned on a[...]

-24 When connecting with a DVI digital cable The projector emplo ys the D VI digital input ter minal f or direct input of Digital Video signals from a computer . * When using the ø3.5 mm mono audio cable, the volume level will be half of when using the ø3.5 mm stereo audio cable. Computer * ø3.5 mm stereo or mono audio cable (commercially availa[...]

-25 Connections Connecting to Video Equipment The image quality is highest in order of the Component signal, the RGB signal, the S-video signal and the Video signal. If your audio-visual equipment has a component output terminal or RGB output ter minal, use the COMPUTER/COMPONENT terminal 1 or 2 on the projector for video connection. When connectin[...]

-26 When connecting video equipment with S-video output terminal When connecting video equipment with video output terminal Note • When you connect video equipment with a 21-pin RGB output (Euro-scart) to the projector , use a com- mercially av ailable cab le that fits in the projector terminal you want to connect. RCA audio cable (commercially a[...]

-27 Connections Controlling the Projector by a Computer When the RS-232C terminal on the projector is connected to a computer , the computer can be used to control the projector and check the status of the projector . Refer to the “SETUP MANUAL ” contained on the supplied CD-ROM f or “RS-232C Specifications and Commands”. When connecting to[...]

-28 To RGB input terminal RGB cable (commercially available) RGB cable To RGB output terminal To COMPUTER/ COMPONENT 1 input terminal To MONITOR OUT terminal Monitor Computer When connecting to the LAN terminal using a LAN cable Note • When connecting to hub , use straight-through Category 5 (CA T .5) type cab le (commercially av ailable). • Wh[...]

-29 Connections A udio signals input from equipment connected to each audio input terminal of the projector can be output to audio equipment. Note • Tu rn off the po wer of both the projector and audio equipment when connecting. • When tur ning off the pow er in the case of connecting an amplifier or other audio equipment, first turn off the po[...]

-30 AC socket To AC outlet T urning the Pr ojector On/Off Info • When “Auto Restart” is set to “On”: If the power cord is unplugged fr om the outlet or the breaker switch is turned off when the pr ojector is on, then the projector automatically turns on when the power cord is plugged into the AC outlet or the breaker switch is turned on. [...]

-31 Basic Operation Image Projection Height Adjustment button Side View Lens center T op View Using the Adjustment Feet The height of the projector can be adjusted using the adjustment feet when the screen is located higher than the projector , the screen is inclined or when the installation site is slightly inclined. Install the projector so that [...]

-32 Image Projection " On-screen Display (Keystone Correction mode) KEYST ONE button MOUSE/Adjustment buttons ( ' / " / / | ) RETURN button Compresses lower side. Compresses upper side. Note • The Manual Keystone Correction can be ad- justed up to an angle of appro ximately ±40 degrees and the screen can also be set up to an ang[...]

-33 Basic Operation Adjusting the Lens The image is focused and adjusted to the screen size using the focus ring or zoom knob on the projector . 1 The focus is adjusted by rotat- ing the focus ring. 2 Zooming is adjusted by moving the zoom knob. Focus ring Zoom knob Zoom in Zoom out[...]

-34 Image Projection Switching the INPUT Mode Select the appropriate input mode for the con- nected equipment. On the remote control Press , , , or on the remote control to select the input mode. On the projector 1 1 1 1 1 Press an INPUT ( ' ' ' ' ' / " " " " " ) b utton. • The INPUT list appears.[...]

-35 Basic Operation Adjusting the Volume Press / VO L on the projector or / VO L on the remote control to adjust the v olume . Note • Pressing or V OL will lower the v olume. Pressing or V OL will r aise the volume . Displaying the Black Screen and Turning Off the Sound Temporarily Press AV MUTE on the remote contr ol to tem- porarily display a b[...]

-36 Displaying and Setting the Break Timer This function allows you to show the remaining time for break during meeting. 1 Press BREAK TIMER. The break timer starts to count down from 5 minutes. 2 When “ ” is displa yed, press ' ' ' ' ' , " " " " " , or | | | | | to set the break timer[...]

-37 Basic Operation Resize Mode This function allows y ou to modify or customize the resize mode to enhance the input image. De- pending on the input signal, y ou can choose a desired image. COMPUTER STRETCH For 4:3 screen For 16:9 screen Input signal Image type NORMAL FULL BORDER 4:3 aspect ratio 5:4 aspect ratio 16:10 aspect ratio 16:9 aspect rat[...]

-38 VIDEO/DTV ** ** * * * * 4:3 aspect ratio Squeeze Letter box 16:9 aspect ratio 16:9 aspect ratio (4:3 aspect ratio in 16:9) For 4:3 screen For 16:9 screen Input signal Image type NORMAL Video/DTV 480 I , 480P , 576 I , 576P , NTSC, P AL, SECAM 720P , 1035 I , 1080 I 540P : Cutout area on which images cannot be projected : Area on which the image[...]

-39 Basic Operation Using the Remote Control as the Wireless Computer Mouse When connecting the projector and the computer with a USB cable, you can use the remote control as the computer mouse. If the computer is placed too far away from the projector to be connected via the USB cable, the separately sold remote receiver (AN-MR2) makes it possible[...]

-40 Menu Items The follo wing shows the items that can be set in the pr ojector . Note • “Fine Sync” menu is only displayed when the projector input is COMPUTER/COMPONENT 1, 2 or DVI-D. “Picture” menu “Fine Sync” menu COMPUTER/COMPONENT 1 (RGB), COMPUTER/COMPONENT 2 (RGB), D VI-D Picture Picture Mode Contrast Bright Red Blue CLR T emp[...]

-41 Useful Features “Options1” menu “Language” menu “Options2” menu Options1 Lamp Timer (Life) Resize Image Shift Ke ystone Auto K eystone OSD Display Background Eco+Quiet Mode Auto P ower Off System Sound Menu P osition System Lock Auto Restart h ( 100%) VIDEO Normal On On Logo On On On Center Disable On SEL./ADJ. RETURN ENTER END 0 0 [...]

-42 Picture Picture Mode Contrast Bright Red Blue CLR T emp Reset Signal T ype COMP .1 Standard 7500K Auto SEL./ADJ. RETURN ENTER END 0 0 0 0 Using the Menu Screen Menu Selections Example: Adjusting “Bright” • This operation can also be perf ormed by using the buttons on the projector . Menu icons MENU button MOUSE/Adjustment buttons ( '[...]

-43 Useful Features Picture Picture Mode Contrast Bright Red Blue CLR T emp Reset Signal T ype COMP .1 Standard 7500K Auto SEL./ADJ. RETURN ENTER END 0 0 0 0 3 Press ' ' ' ' ' or " " " " " to select the item y ou want to adjust. • The selected item is highlighted. To adjust the pro- jected image w[...]

-44 Picture Picture Mode Contr ast Br ight Red Blue CLR T emp Reset Signal T ype Dynamic Range DVI Standard 7500K D. PC RGB Standard SEL./ADJ . RETURN ENTER END 0 0 0 0 Menu operation Pag e 42 1 2 3 4 5 1 1 1 1 1 Selecting the Picture Mode This function allows you to select the picture mode in accordance with brightness of the room or content of th[...]

-45 Useful Features Menu operation Pag e 42 Note • The Video signal can only be set in VIDEO or S-VIDEO mode. • When “Video System” is set to “Auto”, y ou may not receiv e a clear picture due to signal differ- ences. Should this occur, s witch to the video system of the source signal. * When reproducing NTSC signals in P AL video equipm[...]

-46 Fine Sync Clock Phase H-P os V- Po s Reset Resolution Auto Sync Signal Info COMP .1 640 × 480 On SEL./ADJ. RETURN ENTER END 0 0 0 0 Computer Image Adjustment (“Fine Sync” menu) Menu operation Pag e 42 1 2 3 1 1 1 1 1 Adjusting the Computer Image If the optim um image cannot be obtained with Auto Sync adjustment, use the Fine Sync function.[...]

-47 Useful Features Options1 Lamp Timer (Life) Resize Image Shift Ke ystone Auto K eystone OSD Display Background Eco+Quiet Mode Auto P ower Off System Sound Menu P osition System Lock Auto Restart h ( 100%) VIDEO Normal On On Logo On On On Center Disable On SEL./ADJ. RETURN ENTER END 0 0 0 Using the “Options1” Menu Menu operation Pag e 42 1 2 [...]

-48 Using the “Options1” Menu Menu operation Pag e 42 4 4 4 4 4 Keystone Correction When the image is projected either from the top or from the bottom towards the screen at an angle, the image be- comes distorted trapezoidally . The function f or correct- ing trapezoidal distortion is called Keystone Correction. Auto Keystone Correction Set “[...]

-49 Useful Features Menu operation Pag e 42 Description A confirmation sound is made when the projector turns on/off. No confirmation sound is made. Selectable items On Off 9 9 9 9 9 Setting the System Sound Description Displa yed on the center of the image . Displayed on the upper right of the image. Displayed on the lower right of the image. Disp[...]

-50 Menu operation Pag e 42 When System Lock is set When System Lock is set, the keycode in- put screen appears after the po wer is turned on. When it appears, enter the right keycode to start projection. Failure to enter the keycode will cause images not to be pr ojected even when signals are entered to the projector . ▼ Input screen for ke ycod[...]

-51 Useful Features Helpful Functions Set during Installation (“ Options2” menu) Menu operation Pag e 42 1 1 1 1 1 Setting a Password If you do not want other s to change the setting f or the “Options2” menu, set a passw ord. 1 Select “P assw ord”, then press | | | | | . • The screen for entering the pass word is display ed. 2 Press &[...]

-52 8 8 8 8 8 Selecting the T ransmis- sion Speed (RS-232C) Make sure that both the projector and computer are set for the same baud rate. Description Tr ansmission speed is slow . Tr ansmission speed is rapid. Selectable items 9600 bps 38400 bps 115200 bps Note • Refer to the “SETUP MANUAL” contained on the supplied CD-ROM for RS-232C Specif[...]

-53 Useful Features Menu operation Pag e 42 9 9 9 9 9 DHCP Client Setting Connect the LAN cable before turning the pro- jector on. If not, the DHCP Client function does not work. Select “On” for “DHCP Client”, then press ENTER . “Obtaining IP Address... ” appears, then the menu screen appears. Confirm the parameters of IP Address, Subne[...]

-54 q q q q q Confirming the Network Information for the Projector Y ou can confirm the MA C address and pr ojector name. w w w w w Returning to the Default Settings This function allows you to initialize the settings y ou have made in the projector . Displayed items MA C Address Projector Description The MAC address of the projector is displayed. [...]

-55 Appendix Cleaning the lens ■ Use a commercially available blower or lens clean- ing paper (for glasses and camera lenses) for clean- ing the lens. Do not use any liquid type cleaning agents, as the y may w ear off the coating film on the surface of the lens. ■ As the surf ace of the lens can easily get damaged, be careful not to scrape or h[...]

-56 Replacing the Air Filter • This projector is equipped with air filters to ensure the optimal operating condition of the projector . • Ask your nearest Sharp A uthorized Pro- jector Dealer or Service Center to ex- c hange the filter (PFILD A022WJKZ) when it is no longer possible to clean. Replacing the Air Filter 1 Press ST ANDBY/ON on the p[...]

-57 Appendix 5 Place a replacement air filter . • Place the new air filter onto the filter co ver . 6 Replace the filter co ver . • Slide the filter cover in the direction of the arrow to close it. Note • Ensure the filter cov er is securely installed. The power will not turn on unless it is correctly in- stalled.[...]

-58 Po w er indicator Lamp indicator T emperature warning indicator Maintenance Indicators Maintenance Indicators ■ The warning lights on the projector indicate pr oblems inside the projector . ■ If a problem occurs, either the temperature indicator or the lamp indicator will illuminate red, and the pr ojector will enter the standby mode. After[...]

-59 Appendix Maintenance indicator Problem Cause P ossible solution T emperature warning indicator Normal Abnormal Off Red on (Standby) The internal temperature is abnormally high. Abnormal • Blocked air intake • Relocate the projector to an area with proper ventilation (see page 8 ). • Cooling fan break- down • Internal circuit failure •[...]

-60 Lamp ■ It is recommended that the lamp unit (optional: AN-C430LP) be replaced when the remaining lamp life becomes 5% or less, or when you notice a significant deterioration in the picture and color quality . The lamp life (per centage) can be chec ked with the on-screen display . See pa ge 47 . ■ Purc hase a replacement lamp unit of type A[...]

-61 Appendix Securing screws Optional accessory Lamp unit AN-C430LP Removing and Installing the Lamp Unit W arning! • Do not remov e the lamp unit from the pro- jector right after use. The lamp and par ts around the lamp will be v er y hot and may cause burn or injur y . Info • Do not touch the glass surf ace of the lamp unit or the inside of t[...]

-62 5 Insert the new lamp unit. • Press the lamp unit firmly into the lamp unit compartment. Fasten the securing screws. 6 Replace the lamp unit cover . • Align the lamp unit cover and slide it to close. Then tighten the user service screw to secure the lamp unit co ver . Info • If the lamp unit and lamp unit cov er are not correctly installe[...]

-63 Appendix Note • This projector ma y not be able to displa y images from notebook computers in simultaneous (CR T/LCD) mode. Should this occur , tur n off the LCD display on the notebook computer and output the displa y data in “CRT only” mode. Details on how to change displa y modes can be found in y our notebook computer’ s operation m[...]

-64 Tr oubleshooting Check • Projector pow er cord is not plugged into the wall outlet. • Po w er to the e xternal connected devices is off . • The selected input mode is wrong. • The A V MUTE function is working. • Cables incorrectly connected to the rear panel of the projector . • Remote control batteries hav e run out. • External o[...]

-65 Appendix Check Problem P age Maintenance indicator illuminates or b links in red. The projector cannot be turned on or put into the standby mode using the ST ANDBY/ON button on the projector . Picture is green with component input signals (COMPUTER/ COMPONENT 1, 2, DVI-D) . Picture is pink (no green) with RGB input signals (COMPUTER/ COMPONENT [...]

-66 For SHARP Assistance If y ou encounter any pr oblems during setup or operation of this projector , first refer to the “T roubleshooting” section on pages 64 and 65 . If this operation manual does not answer y our question, please contact the SHARP Service depar tments listed below . U .S.A. Sharp Electronics Corporation 1-888-GO-SHARP (1-88[...]

-67 Appendix Specifications As a par t of policy of continuous improv ement, SHARP reser v es the r ight to mak e design and specification changes f or product improv ement without prior notice. The performance specification figures indicated are nominal v alues of production units. There may be some de viations from these values in individual unit[...]

-68 2D Progressiv e ......................................................... 45 3D Progressiv e ......................................................... 45 AC soc ket .................................................................. 30 Adjustment buttons ................................................... 42 All Reset ...........................[...]

SHARP CORPORA TION[...]