Siemens 9014 manual

E d ition: September 1999 9014, 9015, 9015 E, 9016 P r inter Epson and I BM Proprinter Em ulation Progr ammer Reference Guide[...]

Copyright and T rade m arks Co p y r ight © Si e m e ns A G 1 9 9 9 . A l l r i g hts rese r v ed. De l i v e r y s u b je c t t o a v a il a b i lit y ; r i gh t of t e c hn i c a l mod i fi c at i o n s r e s e r v e d . A l l h a rd w a re a nd so f t w ar e names u se d ar e t r a d em a r ks o f th e ir r e s p ecti v e m a nu factur e rs.[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K01 Preface This manual descr ibes the IBM ® Prop rinte r ® emulation as well as the Epson ® LQ -2550 and ESC/P2 e mulation. Brief description o f the printer The 9014, 90 15,9015 E and 901 6 print[...]

Pref ace Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K01 9014 Ne edle Pr inter The 9014 pr inter i s equipp ed with co ntinuous for ms tra ctor and manual single sheet inse r tio n. F or autom atic sheet fee ding, the pr inter can be equi pped [...]

Pref ace Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K01 9015 Ne edle Pr inter Conv enient hand ling of pa per is available with the 9015 prin ter : Using tra ctor cass ettes, two con tinuous for ms stacks can be inse r ted in a comfor - table [...]

Pref ace Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K01 9015 E N eedle Printer The 9015 E needle printer offers the same attr ibutes as the 9015 pr inter except from t he cut-off f eature. Addit ionally , the 9015 E prin ter can optionally b e[...]

Pref ace Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K01 9016 Ne edle Pr inter The fast hi gh perfor ma nce 9016 nee dle pr inter o ffers the han dling of c ontinouos form s (tractor) and , optional ly , of s ingle shee ts (manual inser tion).[...]

Target group Pref ace Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K01 Ta r g e t g r o u p The conten ts of this manual is intended fo r users w ho want to program pr inter output. F amiliarit y with prin ter programmin g is re quired. Summary [...]

Notational convent ions Pref ace Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K01 Notational conventions In this m anual, the fol lowing conventions hav e been used: Italics Names of fi les, programs, commands, variables, option s and screen tex[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K02 T e chni cal data and printer option s 9014 printer inter face modules The 9014 pr inter wi th IBM Pr opr inter and Ep son LQ-25 50 emulation is equi pped with th e 90142-12 interface m odule. It [...]

Technical data and printer options Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K02 F or networ k co nnections, th e following in terface m odule is av a ilable: – 90152-LE 2 (Ether net ® LAN c onnectio n for Epson LQ-2550 an d IBM Pr oprinte[...]

Technica l data Technical data and printer options Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K02 T echnical data The following t able lists the ma jor tech nical da ta of the pr inter t hat is relevant to programmers. Pri nting syst em Print [...]

Characte r compl eme nt Technical data and printer options Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K02 Character complement The standa rd characte r complem ent of t he prin ters co ntains up to fifteen f onts with sev eral character sets. [...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K03 Connectio n options o f the 901x-12 prin ters The 901x- 12 pr inters ca n be co nnected v ia the se ria l and paral lel interfa ce. Serial interface V .24 (RS-232 C) The 901x- 12 prin ters ca n be[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Description o f the IB M Proprinter emulation With the I BM Prop rinter emulation, th e 9014, 901 5, 9015 E and 9016 printer s behave like the 4207 an d 4208 (XL24) pr inters from IBM. The comman [...]

Initia l condit ion IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Initial c ondition After power-on, the pr inter is in the following co ndition: – Printer buffer cleare d – All ver tica l tab stop s rese t – Pr[...]

Forms trans port mecha nism IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Forms transport mechanism The prin ter is alwa y s equipped with tw o continous for ms tractors. The last sheet of a conti- nuous for ms st ack[...]

Forms trans port mecha nism IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 ● 9014 Print er p 1 = 0 Manual si ngle for m fe ed p 1 =1 bis 3 ASF , bin 1 to 3 p 1 = 6 Ignored p 1 = 7 Tr a c t o r p 1 = 8 ASF , bin 1 or [...]

Forms trans port mecha nism IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 ● 9015 Print er p 1 = 0 to 3 Ignored p 1 = 6 Upper tractor p 1 = 7 Lo w er tr act or p 1 = 8 to 10 Ignored p 1 = 15 Selec tion of both tracto[...]

Forms trans port mecha nism IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 ● 9015 E Pr inter p 1 = 0 Manual si ngle for m fe ed p 1 =1 to 3 Ignored p 1 = 6 Upper tractor p 1 = 7 Lo w er tr act or p 1 = 8 to 10 Ignore[...]

Forms trans port mecha nism IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 ● 9016 Print er p 1 = 0 Manual si ngle for m fe ed p 1 =1 to 3 Ignored p 1 = 6 Ignored p 1 = 7 Low er tr act or p 1 = 8 to 10 Ignored p 1 = 1[...]

Forms layout IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Forms layout The dimens ions of the f or m can be selec ted freel y . The fol lowing commands are av ailable: ● Set for m len gth in li nes ● Set for m le[...]

Forms layout IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set form length in inches This com mand specif ies the physical page lengt h in inches and sets the current ver ti cal positio n as the fi rst print line (to [...]

Forms layout IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Reset perforation skip mode Set first print line The current pr int line is defined as the first pr int line ( top for m). The first pr int l ine should be se[...]

Forms layout IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set left and right margins The paramete rs define the first a nd last pri nt columns of a lin e at th e current c haracter pi tch and thus d efine the l eft a[...]

Forms transpo rt IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Forms transport The following c ommands affect the paper movement: ● Set 8 lpi ● Set 7 / 72 inch l ine spac ing mode ● Preset n / 72 inch line spa c[...]

Forms transpo rt IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Preset n/72 inch line spaci ng mode A line s pacing o f n / 72 is pr eset. The d efined li ne spacing is set by the ESC 2 command. p 1 Line s pacing in 1 [...]

Forms transpo rt IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set line spacing unit This com mand sets the line sp acing uni t to either 1 / 216 inch or 1 / 180 inch. The prese t line sp acing un it only affec ts the[...]

Forms transpo rt IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Rev er se lin e feed The rev erse line f eed is pe rfor med using the curre nt line sp acing. The contents of the line b u ff er ar e printed. Form feed ([...]

Forms transpo rt IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set vertical tab stops A maximum of 6 4 ver tical tab s tops can be s et. Previously se t ver tical tab s tops are res et. The ver tical tab st ops must b[...]

Forms transpo rt IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Additional command s Load line spacing This comm and loads and s ets the line sp acing. V alid values: 1, 2, 3, 4, 6, 8, 12, 16 , 24, 48, 60, 72, 90, 144,[...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Print carriage movements The following c ommands control the pri nt carr iage movements: ● Carriage retur n ● Print he ad to left m argin ?[...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Print head to left ma rgin The pr int carr iage m ov es to the beg inning of the line. Space The pr int head m ov e s one spa ce width u sing t[...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set 12 cpi Set a cha racter pitch of 12 cpi. Set 17.1 cpi Set a cha racter pitch of 17.1 cp i. Set/reset proportional spacing mode In propor ti[...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Relative horizontal tabulation The hor izontal pr int posi tion is moved right by the defined a mount. The specifie d shift begin s at the c ur[...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set horizontal tab stops This comm and sets h orizont al tab st ops. A maximum o f 32 hor izontal tab s tops can b e set. Previously set hor iz[...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Horizontal tabulation This control character may be locat ed anywhere within a line and cau ses tabulation to the next horizontal tab stop . Re[...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Additional command s Absolute horizontal positioning p1 defi nes the pr int p osition and consists of a maximum of three d igits. p1 = 0 and p [...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Font design The following c ommands are av ailable for font de sign: ● Select IBM c haracter set 1 ● Select IBM c haracter set 2 ● Set boldfa ce mode ●[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Select I BM ch ara ct er se t 2 In the ini tial c ondition the pr inter us es the chara cter se t specifi ed in the menu. Set boldface mode Reset boldface mode[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set subscript/super script mode This com mand caus es redu ced-size ch aracters to be super scrip ted (exponents) or subscr ipte d (indic es). Supers cripte d [...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set expanded mode for one line The character s in one line are pr inted with double wid th. The functi on is ter minat ed by LF , CR , VT , FF , DC4 and ESC W [...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set character size and line spacing This com mand defin es the li ne spacing, the character height, a nd the cha racter width. p 1 The left h alf-byte defin es[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set print quality and character pitch This com mand defin es the pr int qu ality and th e character p itch. p 1 defines the pr int quality and the c haracter p[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set/rese t overscor e mode The character s are overscored. p 1 sets/res ets the overscore mod e V alid parameter values: Control sequence Hexadecimal Decimal E[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Additional commands Set graphic settings V alid values: p 1 = 0 No r mal present ation (al l settin gs rese t) p 1 = 1 Bold p 1 = 3 Italics p 1 = 4 Und ersc or[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Character repetition p1 can be a ma ximum of thr ee digits. Graphical change of sizes V alid values: p 1 = 1 00 / p 2 = 100 Nor mal heig ht / nor mal w idth p [...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set national version and c ode page p 1 = 1 to 15 For national versions or code pag es p1 für IBM S ET 2: p1 for IBM CODE P AGE: Control sequence Hexadecimal [...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set national version See the c ommand “ Set/rese t ov erscore mode ” for the setting of p1 . Set code page See the c ommand “ Set/rese t ov erscore mode [...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 p 1 = 6 Script p 1 = 7 OCR-B p 1 = 8 OCR-A p 1 = 9 Orat or-C p 1 = 10 Orator p 1 = 11 Data B lock p 1 = 12 Da ta Large p 2 = 1 10 cp i p 2 = 2 12 cpi p 2 = 3 1[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Select font See the c ommand “ Set character pitch a nd select fo nt ” for the setting of p1 . Set print quality (NLQ, LQ) p 1 = 0 LQ p 1 = 1 NLQ This is o[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Bitmap graphics The following c ommands are av ailable: ● Select graphic s mode ● Select s ingle dot -densit y graphics mode ● Select do uble dot-de[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Figure 2: V er tical dot density 180 dpi 1/180 inch First data byte d1 B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0 Second data byte d2 B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 p 1 defi nes the graphics m ode V alid parameter values: 1) In this mode, printi ng in adj acent colum ns is no t possible. p 2 p 3 define the number o f [...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Select single dot-density graphics mode The graphics data is transfer red in col umns. A column contains 8 individ ual ver tical do ts (see Select graphic[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Select double dot-density and double-speed graphics mode The graphics data is transfer red in col umns. A column contains 8 individ ual ver tical do ts (s[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Select quadruple dot-density graphics mode The graphics data is transfer red in col umns. A column contains 8 individ ual ver tical do ts (see Select grap[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Select graphics mode (expanded) The graphics data is transfer red in col umns. A column contains either 8 or 24 indi vidual v er tic al dots. Each graphic[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Figure 4: V er tical dot density 180 dpi 1/180 inch First data byte d1 B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0 Second data byte d2 B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 p 1 p 2 define the numbe r of graphics d ata bytes + 1 Number of graphics data bytes = p 1 + (p 2 * 256) * number o f bytes/colu mn p 3 define s the graph[...]

Miscel la neou s co mma nds IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Miscellaneous commands ● Set defa ult tab st ops ● T ranspar ent pr int data for one characte r ● T ranspar ent pr int data for se ver al[...]

Miscel la neou s co mma nds IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 T ranspare nt print data for sev eral ch aracters This comm and enables pr inting the character s in all code lo catio ns. Characters defi ned [...]

Miscel la neou s co mma nds IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Set printer online Sets an o ffline pr inter o nline. The comm and is i neffective if the printer was s et offline with the ONLIN E button. Set[...]

Miscel la neou s co mma nds IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 NUL function This con trol character ha s no ef fect. Additional commands Command replacement $$ This com mand replac es the contr ol sequ ence[...]

Alterna tive gra phics m ode AGM IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Alternative graphics mode AGM The alter nati v e graphics mo de can be selecte d in the me nu (see [2]). In the al ter native graphics mo [...]

Alterna tive gra phics m ode AGM IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Rela tive vertic al ta bulation f orwa rd The ver tical pr int positi on is moved down n / 216 or n / 180 inch depending on the line s pac[...]

Alterna tive gra phics m ode AGM IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Select graphics mode The graphics data is transfer red in col umns. A column contains either 8 or 24 indi vidual v er tic al dots. Each gr[...]

Alterna tive gra phics m ode AGM IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 Figure 6: V er tical dot density 180 dpi 1/180 inch First data byte d1 B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0 Second data byte d2 B 7 B 6 B 5 B 4[...]

Alterna tive gra phics m ode AGM IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K04 p 1 defi nes the graphics m ode V alid parameter values: 1) In this mode, printi ng in adj acent colum ns is no t possible. p 2 p 3 define[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Description o f the Epson LQ-2550 emulation With the Ep son LQ-2550 emulatio n, the 9014, 9015 , 9015 E and 90 16 printe rs behave lik e the Ep son LQ-255 0. The comman ds are div ided into the[...]

Initia l condit ion Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Initial c ondition After power-on, the pr inter is in the following in itial co ndition: – Printer buffer cleare d – T ab stops i n all ver tical[...]

Initia l condit ion Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 The following f unctions depend on the menu setti ng: – F or m len gth – P erforation s kip mode – Left margin – Right ma rgin – Line spac [...]

Forms trans port mecha nism Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Forms transport mechanism The pr inter is a lwa ys equipped w ith two conti nuous for ms trac tors. The last s heet of a c onti- nuous for ms[...]

Forms trans port mecha nism Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Additional commands Eject sheet This com mand causes a ver tical for m feed to the b eginning of the next page. Select paper source and e jec[...]

Forms trans port mecha nism Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 p 1 = 10 ASF , bi n 1 or 2 or 3 p 2 = 0 A GC = auto matic ga p cont rol p 2 = 1 to 6 PCC = programm able copy control (Pr int gap for 1- to 6[...]

Forms trans port mecha nism Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 ● 9015 printer p 1 = 0 to 3 Ignored p 1 = 6 Upper tractor p 1 = 7 Lo w er tr act or p 1 = 8 to 10 Ignored p 1 = 15 Selec tion of both tract[...]

Forms trans port mecha nism Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 ● 9015 E print er p 1 = 0 Manual si ngle for m fe ed p 1 =1 to 3 Ignored p 1 = 6 Upper tractor p 1 = 7 Lo w er tr act or p 1 = 8 to 10 Igno[...]

Forms trans port mecha nism Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 ● 9016 printer p 1 = 0 Manual si ngle for m fe ed p 1 = 1 bis 3 Ignored p 1 = 6 Ignored p 1 = 7 Low er T rac tor p 1 = 8 bis 10 Ignored p 1[...]

Forms layout Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Forms layout The dimens ions of a form can be selecte d freely . The following comman ds are available: ● Set for m len gth in li nes ● Set for m len gt[...]

Forms layout Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set form length in inches This com mand specif ies the physical form length in inches a nd sets t he current v e r tical positio n as the fi rst print line [...]

Forms layout Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Reset perforation skip mode The perforat ion skip m ode is res et. Set left margin The left mar gin is se t to the r ight ed ge of the s pecified co lumn. T[...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Forms transport The following c ommands affect pap er movements: ● Set 8 lpi ● Set 6 lpi ● Set n / 60 inch l ine spac ing mode ● Set n / 180 inc[...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set n/60 inch line spacing mode The line s pacing is set to n / 60 inch . p 1 Line s pacing i n 1 / 60 inch increm ents Set n/ 18 0 inch lin e spacing m[...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set n/ 36 0 inch lin e spacing m ode The line s pacing is set to n / 36 0 inch. p 1 Line s pacing in 1 / 360 inch increm ents Line feed (LF) The line fe[...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Relative vertical tabulation forward The ver tical print po sition i s moved down in n / 180 inch increm ents. p 1 Rela tive v er tical mov ement in n /[...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set vertical tab stops This com mand sets ver ti cal tab stop s in cha nnel 0 (see Select vert ical tabula tion chan nel and Set ver ti cal tab stop s i[...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set vertic al tab stops in cha nnel This com mand sets ver ti cal tab stop s in the s pecified c hannel (se e table “Set ver tical tab stops” on pag[...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 V ertical tabulat ion This con trol charact er causes v er tical tabulation to th e ne xt ver tical t ab stop in the curren t v er tic al tabulation ch [...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Print carriage movements The following c ommands affect the prin t carr iage movements: ● Carriage retur n ● Sp ace ● Backspace ● Set[...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Space A space is pri nted usi ng the set or programmed cha racter pitch . In the expanded and spaced modes the space width is incr eased acc [...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set 15 cpi The character pitch is set to 15 cpi. Set/reset proportional spacing mode In the propor tional s pacing mode, the chara cter width[...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set charact er spacing mode This com mand sets the space b etween character s (space d mode). The space depends on the sel ected pr int quali[...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Relative horizontal tabulation The pri nt head moves right or le ft the defined amount. The sh ift is base d on the curre nt print positio n [...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set horizontal tab stops This com mand sets ho rizontal ta b stops. Up to 32 hor izontal tab sto ps ca n be define d. Previously set hor izon[...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set print direction (bidirectional or unidirectional) Unidirecti onal pr inting should b e used if high positi oning prec ision i s required [...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Select t ext al ignment The text alignment defines the h orizonta l position of a pr int line r elative to the s et margins (see Set left mar[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Font design The following c ommands are av ailable for font de sign: ● Select fo nt ● Select na tional version ● Select c haracter set ● Set/rese t u[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Select font The defaul t character comple ment of th e pr inter conta ins el e ven fon ts. Fur ther fo nts can be plugged i n with a P R OM on th e PM (pers [...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Select national version This com mand allows switching between nation al versions anywhere within the text. In the ini tial con dition, the printer uses th e[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Select c haracter se t This com mand allows switching between character sets anywher e within th e te xt. In the ini tial con dition, the printer u ses the c[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Copy current characte r set int o user-def ined charact er set This com mand copies the curre nt character set into t he user-de fined cha racter set. p 1 de[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Define us er-define d char acters One or several characters can b e defin ed. If the c urrent charact er set was loade d in the user-defi ned character s et [...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Meaning o f parameters p 3 , p 4 and p 5 : The character infor matio n is transferr ed in 3 bytes per column. The number of data bytes to be transferr ed is [...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Example T o l oad this cha racter (in DRAFT a nd 10 cpi ) in co de location X ’21 (deci mal 33), the following co ntrol charac ters hav e to be sen t to th[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Select pri nt qua lity DRAFT or LQ/NLQ i s selecte d. In the ini tial con dition, the print q uality i s defined by the me nu setting (s ee [2]). p 1 defines[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set italics mode Reset italic s mode Set boldface mode Reset boldface mode Set double strike mode Reset double strike mode Control sequence Hexadecimal Decim[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set subscript/super script mode This com mand causes reduce d-size characters to be sup erscr ipted, i.e. pr inted as ex ponents, or subscr ipted, i.e. pr in[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set condensed mode The two comman ds are i dentical i n function . The character s are pr inted in c ompres sed for m. The resul ting charac ter pitch de pen[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set/reset expanded mode In the expanded mo de, the characters a re pr inted wit h double width. p 1 sets/res ets the expanded mod e V alid parameter values: [...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Select print mode combinations The following c haracters a re pri nted usin g the pri nt mode c ombinatio ns define d by parameter p1 . The comman d can be u[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set/reset line marking mode The following c haracters a re pri nted with a n addition al line m ark. p 4 defines the posi tion of the line mar k V alid param[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Additional commands Graphical change of s izes V alid values: p 1 = 1 00 / p 2 = 100 Nor mal heig ht / nor mal w idth p 1 = 2 00 / p 2 = 200 Double height / [...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set national version and c ode page p 1 = 1 to 15 F or na tiona l v ersion EPSON EXT .GCT : p 2 = 3 di git code of the code tab le Control sequence Hexadecim[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set national version See the c ommand “ Set nat ional version an d code pa ge ” for the setting of p1 . Set code page See the c ommand “ Set nat ional [...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set charact er pitc h and select fon t p 1 = 1 Data p 1 = 2 Ro man p 1 = 3 S ans Ser if p 1 = 4 Co urier p 1 = 5 P restige p 1 = 6 Script p 1 = 7 OCR-B p 1 =[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 p 2 = 4 P ropor tional p 2 = 5 P ropor tio nal p 2 = 6 14.4 c pi p 2 = 7 18 cpi p 2 = 8 17.1 cp i p 2 = 9 20 cpi Select font See the c ommand “ Set charact[...]

Bitmap gr aphics Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Bitmap graphics The following c ommands are av ailable: ● Select graphic s mode ● Reassign graphi cs mode Select graphics mode The graphics data is [...]

Bitmap gr aphics Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Figure 8: V er tical dot de nsity 180 dpi 1/180 inch First data byte d1 B 7 B 6 B 5 B 4 B 3 B 2 B 1 B 0 Second data byte d2 B 7 B 6 B 5 B 4 B 3 B 2 B 1 [...]

Bitmap gr aphics Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 p 1 defi nes the graphics m ode V ali d parameter values: 1) In this mode, printi ng in adj acent colum ns is no t possible. p 2 p 3 define the number o[...]

Bitmap gr aphics Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Reassign graphics mode This com mand assign s new graphics modes to the co mmands: ESC K p1 p2 dat a ESC L p1 p2 d ata ESC Y p1 p2 dat a ESC Z p1 p2 dat[...]

Miscellaneous commands ● Control characters between X’80 and X’9F ● Pr inting ch aracters betwee n X’80 and X ’9F ● Reset most s ignifican t bit (MSB) to zero ● Set mos t signifi cant bit (MSB ) to one ● Delete mo st signific ant bit (MSB) d efault ● Set pr inter onl ine ● Set pr inter offlin e ● Clear line buffer ● Delete[...]

Miscel la neou s co mma nds Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Reset most significant bit (MSB) to zer o Resets th e most si gnifica nt bit of all i ncoming data to zero . This co mmand re stric ts parame[...]

Miscel la neou s co mma nds Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set printer online Retur ns the prin ter to the online mo de after the Set prin ter offline c ommand. The comm and is i neffective if the pri[...]

Miscel la neou s co mma nds Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Audible signal This con trol character ha s no ef fect. NUL function This con trol character ha s no ef fect. Additional commands Command rep[...]

Miscel la neou s co mma nds Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Macro sel ection p1 can have the values 1 to 4. p2 selec ts the emulat ion p 2 = 2 IB M Propr inte r p 2 = 3 IB M Propr inte r , AGM p 2 = 4 [...]

ESC / P2 C ommand s Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 ESC / P2 Commands ● Set page fo rm at ● Set page l ength in de fined uni ts ● Set absol ute ver tical pr int p osition ● Set rela tive v er t[...]

ESC / P2 C ommand s Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set page length in defined units Set absolute ver tical print position Control sequence Hexadecimal Decimal ESC ( C p 1 p 2 p 3 1B 28 43 p 1 p 2 p 3 [...]

ESC / P2 C ommand s Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set relativ e vertic al print position Select font by pitch and poi nt p 1 = 0 No chang e in pitch p 1 = 1 Selec ts propo r tional spacin g p 1 = 18,[...]

ESC / P2 C ommand s Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Set unit This com mand defin es the uni t used for p ositioning in n/3600 inches. This definition i s valid for the fo llowing comm ands: p 1 = 01 00[...]

ESC / P2 C ommand s Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Assi gn char act e r table p1 = 3 p 2 = 0 p 3 Character table, selected via p 4 and p 5 p 4 p 5 character t able 0 0 : K ursiv 1 0: PC 437 (USA) 3 0:[...]

ESC / P2 C ommand s Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Print data as char acters This com mand pri nts data a s characters. Select graphics mode p 1 = 01 00 p 2 = 1 o r 49 selec ts graphic s mode Graphics[...]

ESC / P2 C ommand s Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k05 Print raster graphics p1 = 0 graphics mod e (not co mpr es sed) p1 = 1 graphics mode, comp ressed p 2 = 5, 10 , 20 ver tical re solution in 3600/p 2 [...]

Progra m mer Referenc e Guide U26169-J - Z716 - 1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 Bar code s Y ou can p r i nt t h e f o ll o wi n g b a rco d es wi t h t h e 9 0 1x p r i n te r : ● Code 39 ● 2 o u t o f 5 In d ust r i a l ● 2 o u t o f 5 In t e r l e a v ed ● C[...]

Code 39 Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 General info rmation The pr int tolerance is smalle r for ho rizontal bar codes than i t is for v er tical barcodes. Hori zontal barcode s are autom atically p rinte d in unid ire[...]

2 out of 5 In dustria l Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 The blank zone be fore and after the bar code sym bol shou ld be at least 10 times the wi dth of a narrow e lement. Reference table for check digit calculation: Ex[...]

2 out of 5 In terleaved Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 2 out of 5 Interleaved The character complem ent of the 2 out of 5 Inte rleaved code comp rises: – 10 digits : 0 1 2 3 4 5 6 7 8 9 – Star t/s top cha racters: [...]

EAN-8 a nd EAN-13 Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 Codabar The character complem ent of the Co dabar (Mon arch) cod e compr ises: – 10 digits : 0 1 2 3 4 5 6 7 8 9 – 6 specia l charact ers: - $ : / . + – Star t/s t[...]

EAN-8 a nd EAN-13 Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 Lay ou t of EAN-1 3: – T wo digi ts for the ma nufacturer’s countr y – Fiv e digits for the manufactur er – Five digits for the produ ct – One check digit The [...]

Code 93 Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 EAN-8 and EAN-13 Add-on The EAN-8 and EAN-13 codes wi th a two or fi v e- digit ad d-on are pr inte d automati cally if two or five additiona l digits are programmed in the app li[...]

Code 93 Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 In the plai n te xt line, the specia l character s [ ] are pr inted for star t/s top . All character s includi ng the star t, st op , control an d check characters are als o prin [...]

Code 93 Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 Example of check digit cal c ula tio n: The following c haracters a re provided fo r coding th e star t and st op characters: – Star t c haracter : a, b, c , d or s ( he xadeci [...]

MSI Mod 10 /10 Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 The contr ol character s are code d as follows: – ($) hexadecim al: 67 – ( % ) he xadeci mal: 68 – ( /) he xadecima l: 69 – (*) hexadecim al: 6A The co ntr ol cha r[...]

UPC-A and UP C-E Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 Example of check digit calc ula tio n UPC-A and UPC-E The number of characters in the UPC -A and UPC- E codes is fixed and is eight digits fo r UPC-E an d twelve digits f[...]

Code 128 ( EAN 128) Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 UPC-E The UPC-E code is a compress ed version of UPC-A with zero sup pression in s pecific digit sequenc es. Suppress ion of fou r consecu tive zeros begins fr om the [...]

POSTNET Bar codes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 All pr intable ASCII c haracters a re pri nted in the plain text line. All o ther characte rs, star t, stop, control and specia l characte rs and t he check digit a re repl aced [...]

Sel e ct barcod e Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 The barcod e is a fixed size . The length varies with the number of digi ts. The barcode pitch is 21.18 bars/in ch, the bar i s 0.021 i nch nominal , and the ga p is 0.0[...]

Sel e ct barcod e Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 p 2 Speci fication of the bar code set whos e character s are to be p rint ed. Va l u e s : Horizontal barcode without plain text Horizontal barcode with plain text V er[...]

Sel e ct barcod e Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 p 3 Speci fication of bar heig ht; bar height = p 3 x 1 / 12 inch. A decim al whole number with one or two digits (fr om 1 to 99) c an be spe cified. EAN and UPC c odes [...]

Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 p 7 Defin e the pr int direc tion (uni- or bi-dire ctional) If p7 is n ot defined, the sta ndard value (uni- directiona l) is valid. The parameter UN I-DIREC T .CMD n eeds t o be set via [...]

Set/res et barcode m ode Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 Set/reset barcode mode 1) This let ter is a small „ L“! The pr inting of barcode symbols i s set or r eset with thi s control c haracter . The barc ode must b[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 2 out of 5 Industrial Programmin g: 1) This letter is a small “L”! Pri ntout: 2 out of 5 Interleav ed Programmin g: 1) This letter is a small “L”! Pri ntout[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 Codabar (Monarch) Programmin g: 1) This letter is a small “L”! Pri ntout: EAN-8 Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E [...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 EAN-8 Add-on 2 Programmin g: 1) This letter is a small “L”! Pri ntout: EAN-8 Add-on 5 Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e heade[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 EAN-13 Programmin g: 1) This letter is a small “L”! Pri ntout: EAN-13 Add-on 2 Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E S[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 EAN-13 Add-on 5 Programmin g: 1) This letter is a small “L”! Pri ntout: Code 93 Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E [...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 MSI Mod 10/10 Programmin g: 1) This letter is a small “L”! Pri ntout: UPC-E Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E S C [...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 UPC-E Add-on 2 Programmin g: 1) This letter is a small “L”! Pri ntout: UPC-E Add-on 5 Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e heade[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 UPC-A Programmin g: 1) This letter is a small “L”! Pri ntout: UPC-A Add-on 2 Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E S C[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 UPC-A Add-on 5 Programmin g: 1) This letter is a small “L”! Pri ntout: Code 128 Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E [...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 EAN 128 Programmin g: 1) This letter is a small “L”! Pri ntout: POSTNET Programming wi th DPBC (delivery point bar code): 1) This letter is a small “L”! Pri[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 The following ex ampl es use blank zones be fore and a fter the ba rcode symbo l. The size of the blank zones is barcod e-specifi c. The minimum s izes must be obse[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 T wo horizontal barcode symbols one beneath the other Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E S C [;n 2 ;n 3 ;n 4 ;n 5 ;n 6 [...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 T wo vertic al barcode symbols side by side Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E S C [;n 2 ;n 3 ;n 4 ;n 5 ;n 6 S P z Exam[...]

Programmi ng examp les Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 T wo vertical bar code symbols one beneath the other Programmin g: 1) This letter is a small “L”! Pri ntout: Barcod e header : E S C [ ;n 2 ;n 3 ;n 4 ;n 5 ;n 6 [...]

Format of E AN number Barcodes Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K06 Format of the 13 -digit standard EAN number Example of the for mat of an EAN number (Eur opean Ar ti cle Numbe ring ) Check digit g eneration in th e abov e example:[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Command overview of the IBM Proprinter emulation Forms transport mechanisms Command Control sequence Hexa- decimal Decimal Remar k See page Eject s heet E SC [ < s 1 B 5B 3 C 73 27 91 60 115 17[...]

Forms layout IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Forms layout Command Control sequence Hexa- decimal Decimal Remar k See page Set for m length in lines ESC C p 1 1B 43 p 1 27 67 p 1 X’ 01 ≤ p 1 ≤ X’ [...]

Forms transpo rt IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Forms transport Command Control sequence Hexa - decimal Decim al Re mark See page Set 8 lpi E SC 0 1 B 30 27 48 26 Set 7 / 72 inch line spaci n g mode ESC[...]

Forms transpo rt IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Addit ional comm ands: Load line spacin g ESC [ p 1 {1 B 5 B p 1 7B 27 91 p 1 123 17 Reset tab sto p E SC [ p 1 g1 B 5 B p 1 67 27 91 p 1 103 31 Command C[...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Print carriage movements Command Control character sequence Hexa- decimal Decima l Remark See page Carria ge return CR 0D 13 32 Pri nt head to [...]

Print c arriage m ovemen ts IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Addit ional comm ands: Abso lut e horiz ontal positio ning ESC [ p 1 ‘ 1B 5B p 1 60 27 91 p 1 96 38 Relative horiz ontal positio ning ESC [ p[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Font design Command Control character sequence Hexa- decimal Decimal Remar k See page Select I BM character s et 1 E SC 7 1B 37 27 55 39 Select I BM character [...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Set pr int qualit y and character pitch ESC I p 1 1B 49 p 1 27 73 p 1 V a lid values p1 : 44 X’ 00 X’ 02 X’ 03 X’ 08 X’ 0A X’ 10 X’ 12 DRA FT LQ/[...]

Font design IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Select f ont ESC [ p 1 x1 B 5 B p 1 78 1B 5B p 1 78 51 Set pr int qualit y (NLQ, LQ) ESC [ p 1 SP X 1B 5B p 1 20 58 27 91 p 1 32 88 51 Command Control characte[...]

Bitmap gr aphics IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Bitmap graphics Command Control sequence Hexa- dec ima l Decimal R emark See page Select graphics mode ESC * p 1 p 2 p 3 data 1B 2A p 1 p 2 p 3 data 27 42[...]

Miscel la neou s co mma nds IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Miscellaneous commands Command Control sequence Hexa- decimal Decim al Rem ar k Se e page Set defaul t tab st ops ESC R 1B 52 27 82 61 T ranspa[...]

Miscel la neou s co mma nds IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Macro sele ction ESC [ p 1 ; p 2 SP r 1B 5B p 1 3B p 2 20 72 27 91 p 1 59 p 2 32 114 64 Set barc ode ESC [ ; p 2 ; p 3 ; p 4 ; p 5 ; p 6 SP z 1[...]

Alterna tive gra phics m ode AGM IBM Proprinter emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K07 Alternative graphics mode AGM Command Control sequence Hexa- decimal Decima l Remark See page Set n / 60 inch line spaci n g mode ESC A p [...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Command overview of the Epson LQ-2550 emulation Initial c ondition Forms transport mechanism Command Control sequence Hexa- decimal Decima l Remark See page Reset to initial conditi on ESC @ 1B 4 [...]

Forms layout Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Forms layout Command Control sequence Hexa- decimal Decimal R emark See page Set for m length in lines ESC C p 1 1B 43 p 1 27 67 p 1 X’ 0 1 ≤ p 1 ≤ X’ [...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Forms transport Command Control sequence Hexa- dec ima l Decimal Remark See page Set 8 lpi ESC 0 1B 30 27 48 82 Set 6 lpi ESC 2 1B 32 27 50 82 Set n / 60 i[...]

Forms transpo rt Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Ve r t i c a l tabulation VT 0B 11 88 Command Control sequence Hexa- dec ima l Decimal Remark See page[...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Print carriage movements Command Control sequence Hexa- dec ima l Decimal Remark See page Carria ge return CR 0D 13 89 Space S P 20 32 90 Backsp[...]

Print c arriage m ovemen ts Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Set un idirec- tional pr int mode for one line ESC < 1B 3C 27 60 95 Sele ct te xt alignmen t ESC a p 1 1B 61 p 1 27 97 p 1 V a lid values p 1[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Font design Command Control sequence Hexa- dec ima l Decimal Rem ark See page Select font ESC k p 1 1B 6B p 1 27 107 p 1 V alid values p 1 : 98 X’ 00 X’ 01 [...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Define us er- define d characters ESC & NUL p 1 p 2 p 3 p 4 p 5 data 1B 26 00 p 1 p 2 p 3 p 4 p 5 data 27 38 00 p 1 p 2 p 3 p 4 p 5 data p 1 p 2 p 3 p 4 p 5[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Set subscr ipt/ supers cr ipt mode ESC S p 1 1B 53 p 1 27 83 p 1 p 1 = p 1 = X’ 00, X’ 30 Supers cript X’ 01, X’ 31 Subscri pt 107 Reset subscr ipt/ sup[...]

Font design Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Set/res et line mark ing mode ESC ( - ETX NUL SOH p 1 p 2 1B 28 2D 03 00 01 p 1 p 2 27 40 45 03 00 01 p 1 p 2 p 1 p 2 Line pos iti on Line typ e 111 Addit ional[...]

Bitmap gr aphics Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Bitmap graphics Miscellaneous commands Command Control sequence Hexa- decimal Decimal Re mark See page Select graphics mode ESC * p 1 p 2 p 3 data 1B 2A p [...]

Miscel la neou s co mma nds Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 Set pr inter offline DC3 13 19 123 Clear line buffer CAN 18 24 123 Delete character DEL 7F 127 123 Audib le signal BEL 07 07 124 NUL function NU[...]

Miscel la neou s co mma nds Epson LQ-2550 emulation Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K08 ESC / P2 commands Befe hl Steuer - zeichen- folge Hexa- dezimal Dezimal Bemer kung Beschrei- bung Seite Set page f or- mat ESC ( c p 1 p 2 p 3 p[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 Charac ter set tables IBM all character set 012 345678 9 A B C D E F 0 Ø SP 0@ P ‘ pÇ É á ░ α≡ 1 J ! 1A Q aqüæ í ▒ ß± 2 l × " 2B R br éÆ ó ▓ Γ≥[...]

IBM set 1 Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 IBM set 1 0 1 2 345678 9 A B C D EF 0 NUL SP 0@ P ‘ pN U L á ░ α≡ 1 DC1 !1 A Q a q DC1 í ▒  ß± 2 DC2 "2 B R b r DC2 ó ▓ ?[...]

IBM set 1 Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 National versions of IBM set 1 Char acter Co de (He x) 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E 1 : U S A # $ @ []^ ‘{ | }~ 2 : F R A N C E #$à° ç §^ ‘ ?[...]

IBM set 2 Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 IBM set 2 012 345678 9 A B C D E F 0 NUL SP 0@ P ‘p Ç É á ░ α≡ 1 DC1 ! 1A Q aqüæ í ▒ ß± 2 DC2 " 2B R br éÆ ó ▓ ?[...]

IBM set 2 Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 National versions of I BM set 2 Charac ter Set Code (He x) 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E 9B 9D 1 : U S A # $ @ []^ ‘{ | }~ ¢ ¥ 2 : F R A N C E # $[...]

IBM code pages Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 IBM code pages Page 437 0 1 2 345678 9 A B C D EF 0 Ø SP 0@ P ‘ pÇ É á ░ α≡ 1 J ! 1A Q aqüæ í ▒ ß ± 2 l × " 2B R br [...]

IBM code pages Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 Page 850 0 12 345678 9 A B C D E F 0 Ø SP 0@ P ‘ pÇ É á ░  ðÓ - 1 J ! 1A Q aqüæ í ▒  Ðß ± 2 l × " 2B R br éÆ ó ▓  [...]

IBM code pages Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 Page 858 0 12 345678 9 A B C D E F 0 Ø SP 0@ P ‘ pÇ É á ░  ðÓ - 1 J ! 1A Q aqüæ í ▒  Ðß ± 2 l × " 2B R br éÆ ó ▓  [...]

IBM code pages Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 Page 860 0 1 2 345678 9 A B C D E F 0 Ø SP 0@ P ‘ pÇ É á ░ α≡ 1 J ! 1A Q aqüÀ í ▒ ß± 2 l × " 2B R br éÈ ó ▓ [...]

IBM code pages Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 Page 863 0 1 2 345678 9 A B C D E F 0 Ø SP 0@ P ‘ pÇ É  ░ α≡ 1 J ! 1A Q aqüÈ ’ ▒ ß± 2 l × " 2B R br éÊ ó ▓ ?[...]

IBM code pages Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 Page 865 0 1 2 345678 9 A B C D E F 0 Ø SP 0@ P ` pÇ É á ░ α≡ 1 J ! 1A Q aqüæ í ▒ ß± 2 l × " 2B R br éÆ ó ▓ ?[...]

Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 Epson EXT GCT 0 1 2 345678 9 A B C D E F 0 SP 0@ P ‘p Ç É á ░ α≡ 1 ! 1A Q aqüæ í ▒ ß± 2 " 2B R br éÆ ó ▓ Γ≥ 3 # 3C S c [...]

Epso n EXT GC T Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 National versions of Epson EXT GCT Char acter Co de (He x) 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E 1: USA # $ @ []^ ‘{ | }~ 2: FRANCE # $à° ç §^ ‘[...]

Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 Epson IT ALIC 0 1 2 345678 9 A B C D E F 0 SP 0@ P ‘p SP 0@ P ‘p 1 !1 A Q a q !1 A Q a q 2 "2 B R b r "2 B R b r 3 #3 C S cs #3C S c s 4 $4 D T d t $4D T[...]

Epson ITA LIC Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 National version s of Epson IT AL IC (1) Char acter Co de (He x) 23 24 40 5B 5C 5D 5E 60 7B 7C 7D 7E 1 : U S A # $ @ []^ ‘{ | }~ 2 : F R A N C E # $à[...]

Epson ITA LIC Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 National versions of Epson IT ALIC (2) Char acter Co de (He x) A3 A4 C0 DB DC DD DE E0 FB FC FD FE 1: USA # $ @ []^ ‘{ |} ~ 2: FRANCE # $à° ç §^ ?[...]

OCR-A Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 OCR-A 01234567 0 NUL DLE SP 0@ P p 1 SOH D C1 !1 A Q a q 2 STX DC2 "2 B R b r 3 ETX DC3 #3C S c s 4 EO T DC4 $4D T dt 5 ENQ NAK %5 E U e u 6 ACK SYN &6 [...]

ISO 8859 -1 Char act er se t t able s Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k09 ISO 8859-1 0 12 345678 9 A B C D E F 0 SP 0@ P ‘p NBSP °À Ð à ð 1 !1 A Q a q ¡± Á Ñ á ñ 2 "2 B R br ¢ ²Â Ò â ò 3 #3 C S cs £³ à [...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K10 Code tables ISO 7-bit code (international version) Example The letter A has the code 41 (IS O 7-bit c ode). 0 1 234567 0 NUL DLE SP 0 @ P ‘ p 0 1 SOH DC1 ! 1 A Q a q 1 2 STX DC2 " 2 B R b r[...]

Code tables Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K10 ISO 7-bit code (German national versi on) Example The letter A has the code 41 (IS O 7-bit c ode). 0 1 234567 0 NUL DLE SP 0 $ P ‘ p 0 1 SOH DC1 ! 1 A Q a q 1 2 STX DC2 " 2 B R [...]

Code tables Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K10 Meaning of the control characters in the code tables NUL Filler SOH St ar t of header STX St ar t of text ETX End of t e xt EO T End of t ra nsmi ssion ENQ Enquir y ACK P ositive ackno[...]

Code tables Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Inform ations s ysteme AG 1995 Pfad: D: SNIMack witzu261 69o261 69e261 69E.K10 Hexadecimal -> decimal conversion and vice versa 0 1 2 3 4 5 6789 ABCDE F 0 00 16 32 4 8 64 80 96 112 128 144 160 176 192 208 224 240 0 1 01 17 33 4 9 65 81 97 113 129 145 161 177 1[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k11 Interfaces The following d escri bes the two i nterfaces p rovided on the 9 0152-12 i nterface mo dule. Serial V .24/RS-232 C interface General d ata: – Proto cols: DTR, X-O N/X-OFF – T ran[...]

V.24/RS- 232 C Interfaces Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k11 Pin assignment Designation Explanation Direction from/to printer Pin EIA DIN CCITT 1 2 3 4 5 6 7 20 AA BA BB CA CB CC AB CD E1 D1 D2 S2 M2 M1 E2 S1.2 101 103 104 105 1[...]

V.24/RS- 232 C Interfaces Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k11 DTR protocol The following s ignal line s are us ed: The pri nter sets the DTR signal to ON (pos itive le v el) as soon as it is read y to receive data after power-on.[...]

V.24/RS- 232 C Interfaces Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k11 X-ON/X-OFF protocol The following s ignal line s are us ed: After power-on, the DTR s ignal and the R TS sign al are se t to ON (positi v e lev el). W hen the host set[...]

Centronics Interf aces Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k11 Parallel Centronics interface Pin assignment Pin Signal name Explanation Direction from/to p rinter 1 STROBE When the signa l is se t to logic al zero , t he data byte DA[...]

Centronics Interf aces Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k11 Protocol description After power-on, the PE signal goes to zero. The SELECT signal a nd the FAULT si gnal become o ne. Tim i ng The host sets the data lin es ( DATA 1 - D[...]

Centronics Interf aces Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k11 Figure 9: Timing of the Centronics interface DA T A 1 -8 DA T A 0.5 µ s 350ns MAX STR OBE BUSY 0.5 µ s 0.5 µ s ACK N[...]

Use with tw o interfaces Interfaces Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nixdor f Infor mation ss ysteme AG 1995 Pfad: D: S NIMackwi t z u26169 o26169 e26169 e.k11 Use with two interfaces The “Both interfaces active” mode ca n be sele cted in th e menu (see [2] ). In this m ode the pr inter buffer is subdivi ded int[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Siemens Nixdorf Inform at ionssy steme AG 199 5 P f ad : D:SNI Mackwitz u26169 o26 169e26 169E. LI T Related publications Ordering manuals [1] 9015 Pr inter ECMA Emulation Programmer Reference Guide T arg et gr oup Prog ramme rs Conte nts Descr iption of t he cont rol character s of the ECM [...]

Related publications Programmer Reference Guide U26169-J-Z716-1-7600 © Siemens Nixdorf Inform at ionssy steme AG 199 5 P f ad : D:SNI Mackwitz u26169 o26 169e26 169E. LI T [4] 9014 Pr inter ECMA-Emulation Programmer Reference Guide T arg et gr oup Prog ramme rs Conte nts Descr iption of t he cont rol character s of the ECM A emulation. Info[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Siemen s Nixdorf I nforma tionssy s teme AG 1995 Pfad: D:S N IMackwi t zu2616 9 o26169e 26169E . BIO Environmental pro tection Environmentally friendly p roduct design and d evelopment This product has been designed in accord ance with the Siemens stan dard “environmental ly friendly product[...]

Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nix do rf Infor mation ssystem e AG 1995 Pf ad: D:SNI Mackwitz u26169 o26169 e26169 E.SIX Index A absolu te hor izontal position ing 38 absol ute horiz ontal tab ulati on (E pson LQ- 2550) 92 absolu te ver tical position ing 38 A GM mode (IBM P ropri nter) 65 automati c line fe ed (I[...]

Index Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nix do rf Infor mation ssystem e AG 1995 Pf ad: D:SNI Mackwitz u26169 o26169 e26169 E.SIX conden sed mode ( Epson L Q-2550) 108 D define u ser-defin ed character s 102 delete c haracter Epso n LQ-2550 123 IBM Pro printer 6 3 double heigh t mode rese t (E pson LQ-2 550 ) 109 set[...]

Index Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nix do rf Infor mation ssystem e AG 1995 Pf ad: D:SNI Mackwitz u26169 o26169 e26169 E.SIX L left margin Epso n LQ-25 50 81 IBM Pro printer 2 4, 25 line feed automatic (IBM P roprin ter) 62 Epso n LQ-25 50 84 IBM Pro printer 2 8 re verse (IBM Proprinter) 29 line ma rking mode (E[...]

Index Programmer Reference Guide U26169-J-Z716-1-7600 © Sieme ns Nix do rf Infor mation ssystem e AG 1995 Pf ad: D:SNI Mackwitz u26169 o26169 e26169 E.SIX prot oco l X-ON/X -OFF 215 R relat iv e ho riz ontal pos ition ing 38 relative horizontal ta bu lation Epso n LQ-25 50 93 IBM Pro printer 3 5 relative v er tical po sitioning 38 relative v[...]

Comments on 9014, 9 015, 90 15 E, 9016 Printer Epso n and IBM P ropri nter Emula tion U26169-J-Z716-1- 7600 Siemens A G User Docum entation OE C XS QM 4 33094 Paderbor n Germany Fax: (0 525 1) 8 1 52 48 Comments Suggestions Corrections ✁ Subm itted by[...]

Pleas e send me infor mation /course programs o n the following topics Siemens A G T rainin g Center , Consul ting Ser vic e 81730 Mun ich Germany Fax: (++ 49) 89 6 36-520 03 The Siem ens T raining Cen ter offer s consul ting for in-ser vic e training, c ourses a nd self- tuition med ia on almost a ll aspe cts of in format ion techn ology , e ither[...]