Silvercrest KH2150 manual

K OMPERNASS GMBH · BURGSTRASSE 21 · D-44867 BOCHUM www .k omper nass.com ID-Nr .: KH2150-07/08-V1 KH2150 UNIVERSAL REMO TE CONTR OL 3BC UNIVERSAL REMO TE C ONTR OL Operating instructions CV_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:53 Uhr Seite 1[...]

KH 2150 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 CV_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:53 Uhr Seite 4[...]

CONTENT P A GE Safety 3 Proper use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Appliance Ov er view 4 First use 5 Unpacking the device / checking the package contents . . . . . . . . . . . . . . . . .5 Inser ting t he batteries . . . . . . . . . . . . . . . . . . . . . . . . .5 Operating elements 6 L CD display . . . . . . [...]

MA CRO-SETUP – Macro functions 27 MA CRO SET . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 MA CRO CLEAR . . . . . . . . . . . . . . . . . . . . . . . . . . . .28 Maintenance and Cleaning 29 Batter y maintenance . . . . . . . . . . . . . . . . . . . . . . . .29 Cleaning the remote control . . . . . . . . . . . . . . . . . .29 Dispo[...]

UNIVERSAL REMO TE CONTROL KH2150 Safety Proper use Children may only operate the remote contr ol under adult super vision. The universal remote contr ol can replace a maximum of ten remote controls. It can only be used for entertainment electronics with infrared receiv ers. The functions of the universal remote correspond to those of the original r[...]

Damage to the device • If the device is defective, do not attempt to repair it y ourself. In case of damage, contact the manufacturer or his ser vice hotline (see W arranty section). • If liquid escapes from the device or if the device has been other wise damaged, it must be inspected by the manu- facturer or his service hotline. Contact t he m[...]

First use Unpacking the device / checking the pack age contents Attention! K eep the plastic packaging well away fr om small children. There is a risk of suffocation. • Unpack the device and accessories. • Check t he pack age contents - Universal remote control - Operating instructions - Manufacturer list with device code list • Remo ve the p[...]

Note: If the L CD display (2) remains dark, check the polarity of the batteries or insert new batteries. The L CD display (2) is explained in the section L CD display . Operating elements LCD display The L CD display (2) is divided into fields. T ext field (21) The text field has two lines. The first line indicates the current device, such as D VD,[...]

AM/PM symbol (26) If the time is set to 12-hour format, a PM symbol is displayed in the af ternoon between 12:00 and 24:00. (See section SY STEM-SETUP – System settings). Number field (27) The display field for time and date information as well as the device code. Standard display The standard display on the L CD display (2) consists of the infor[...]

CD player (Compact Disk) Amplifier Auxiliar y 2 S button (5) Load SETUP menu or activate SHIFT function. Arrow buttons (6) Mov e up, right, lef t and down in menus. OK button (7) Y ou can confirm a menu selection with the OK button. EXIT button (8) # Leave menu. Speaker button (9) Switch sound on/of f. V OL button (10) Set volume. MA CRO button (11[...]

Video text buttons (12) Switch on video text. Stop automatic paging for war d for multi-page video texts. Display information on the selected device. Show video te xt and television programme at the same time. Switch of f video te xt. Number buttons (13) Enter programme and de vice code numbers. Button for one-/two-digit programme numbers (14) Butt[...]

10 CH button (17) Change the television channel. MENU button (18) Open the menu. EPG button (19) Depending on the selected device, the EPG button activates the following functions: T V/SA T Access the electronic television pr ogramme gu ide. DVD : Access the title menu. VCR : Access ShowVie w . Note: Consult the operating instructions of your V CR [...]

SY S TEM-SETUP o ver view V OL/MUTE SETUP All devices use their own v olume control, if available. If a video device, such as a V CR or DVD player , does not hav e its own v olume control, the volume control of the television device is automatically used ("punch-through function"). The function VOL/MUTE SETUP allo ws you to set the volume[...]

V OL/MUTE SET Set the volume control for each individual de vice. 1. Hold the S button (5) pressed until CODE-SETUP appears in the L CD display (2). 2. Press the down arro w button (6). SYSTEM-SETUP appears in the L CD display (2). 3. Press the right arrow button (6). V OL/MUTE SETUP appears in the L CD display. 4. Press the right arrow button (6).[...]

4. Press the down arro w button (6) repeatedly until TIME- SETUP appears in the L CD display (2). 5. Press the right ar ro w button (6). TIME? 24HR 12:00 appears in the L CD display (2). The message 24HR blinks. Note: Press the up or down arr ow button for (6) 12-hour display . All other settings are explained using 24-hour display as ex ample. 6. [...]

Note: If no button is pressed for appro x. 30 seconds, the message TIMEOUT appears in the L CD display (2). Then the standard display is shown automatically . BA CKLIGHT SETUP Set the backlight time for the LCD display (2). The backlight time can be changed in five second steps. 1. Hold the S button (5) pressed until CODE-SETUP appears in the L CD [...]

2. Press the down arro w button (6). SYSTEM-SETUP appears in the L CD display (2). 3. Press the right arrow button (6). V OL/MUTE SETUP appears in the L CD display (2). 4. Press the down arro w button (6) repeatedly until SYSTEM- RESET appears in the L CD display (2). 5. Press the right arrow button (6). CONFIRM RESET appears in the L CD display (2[...]

CODE-SETUP ov er view 7. Confirm t he selection with the OK button (7). First PLEASE W AIT ... then t he first entr y of the manufacturer list, such as ADMIRAL 0000 , appears in the L CD display (2). 8. Press the up or down arro w button (6). The next manu- facturer with device code appears in the L CD display (2). 9. Press various buttons on the r[...]

ENTER CODES With the ENTER CODES function, you locate the device code in the enclosed manual “Manufacturer List with Device Code List“. Note: T o conclude your input, press the EXIT button (8). 1. Switch on the device for which you w ould like to progr am the remote control. 2. Hold the S button (5) pressed until CODE-SETUP appears in the L CD [...]

Note: For a television, press the de vice button T V (4), then continue with step 8. 7. Press the up or down arro w button (6). The next device appears in the L CD display (2). 8. Confirm t he selection with the OK button (7). SEARCH KEY? appears in the L CD display (2). Note: The remote control switc hes the device code every second and sends an i[...]

Note: For a television, press the de vice button T V (4), then continue with step 8. 7. Press the up or down arro w button (6). The next device appears in the L CD display (2). 8. Confirm t he selection with the OK button (7). SEARCH KEY? appears on the L CD display (2). Note: The remote control sear ches the device list in the forward direction. T[...]

Note: All entries in the device list can be found in the ov er view graphic. 8. Confirm t he selection with the OK button (7). BRAND CODES? appears in the L CD display (2). 9. Search for the manufacturer code in the "Manufacturer codes" t able in t he appendix to these operating instructions. 10. Enter the manufacturer code with the numbe[...]

TIMER SETUP – Timer functions Program the automatic switch-off function SLEEPTIMER and the automatic switch-on function "TIMER". See the graphic "TIMER-SETUP ov er view“. T V SLEEP SETUP The SLEEPTIMER function automatically switches of f the tele- vision af ter the configured time has elapsed. The SLEEPTIMER fu nction can be set[...]

Note: Select a value betw een 1 and 90 minutes. 7. Press the up or down arro w button (6) to set the minutes. 8. Press the right arrow button (6). SUCCESS and the Zzz symbol (25) appear in the L CD display (2). 9. Point the remote contr ol at t he television. After the configured nu mber of minutes elapse, the remote control will switch of f the te[...]

TIMER X SET Programming TIMER X . The "X“ is a placeholder and stands for 1, 2, 3 or 4. All settings are described using TIMER 1 as an ex ample. 1. Hold the S button (5) pressed until CODE-SETUP appears in the L CD display (2). 2. Press the down arro w button (6) repeatedly until TIMER- SETUP appears in the L CD display (2). 3. Press the rig[...]

5. Press the down arro w button (6) repeatedly until the desired TIMER appears in the L CD display (2). 6. Press the right arrow button (6). CONFIRM CLEAR appears in the L CD display (2). 7. Press the right arrow button (6). First SUCCESS then CODE SETUP appears in the L CD display (2). 8. Press the EXIT button (8) repeatedly until the standard dis[...]

LEARN SETUP ov er view MODE LEARN Note: Execute "ALL LEARN CLEAR“ befor e executing "MODE LEARN“ for the first time. See section "ALL LEARN CLEAR“. Learning the button signals of an original remote control. 1. Hold the S button (5) pressed until CODE-SETUP appears in the L CD display (2). 2. Press the down arro w button (6) rep[...]

Note: If "LEARN ERROR“ appears in the L CD display (2), repeat the learning function process starting from step 5. 7. Hold the button on the or iginal remote contr ol pressed until first SUCCESS then LEARN MORE? appears in t he L CD display (2). Note: T o end the learning function, press the EXIT button (8). 8. Press the right arrow button ([...]

MA CR O-SETUP – Macro functions With the macro function, you can sav e a sequence of button presses. The saved macr o can be loaded with t he MACRO button (11) and the number buttons (13) 1 , 2 or 3 . The saved button sequence is ex ecuted automatically . An ex ample of a button sequence would be: • Switch on television. • Change television c[...]

Note: After the tenth button press, the macro is automatically saved. T o save the macro at an earlier point, press the button MACRO (11). 7. Press the desired button sequence. With each button press, the counter goes up by one: MA CRO1 KEY? 03 , MA CRO 1 KEY? 04 etc. After t he tenth button press, the macro is sav ed and SUCCESS appears in t he L [...]

Maintenance and Cleaning Batter y maintenance Memor y function The device codes and learned buttons are r etained dur ing a batter y change. The following ar e immediately deleted: Time information and the lighting time for t he backlight of the L CD display (2). These settings must be entered again after a batter y change. Change the batteries... [...]

T roubleshooting Problem P ossible cause Solution Universal remote control does not respond Device (e.g. TV) is defective. Check functioning of the device (e.g. T V) with the origi- nal remote control. Batteries are inser ted incorrectly . Inser t the batteries into the batter y compar tment with the correct polarity . Batteries are empty . Inser t[...]

T echnical dat a Manufacturer: K ompernaß GmbH Device type: 10-in-1 universal remote contr ol Model: KH 2150 Controllable de vices 10 Dimensions L x W x H: 200 x 48 x 22 mm W eight : 92 g Infrared tr ansmitter frequency: >100 kHz Range: 8 m Angle: 50° Laser: Laser class 1 P ower supply Batter y: 2 x 1.5 V , type AAA/LR03 (micro) Manufacturer c[...]

P ersonal macros P ersonal device codes # Button Device De vice code TV DVD VCR CBL ASA T DSA T AUX 1 CD AMP AUX 2 Steps Macro button 123 1 2 3 4 5 6 7 8 9 10 32 IB_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:52 Uhr Seite 32[...]

Confor mity The first par ty placing the product KH 2150 and all its acces- sories on the market and bearing responsibility in accordance with the German Equipment and Product Safety Act (GPSG) as well as for compliance with the directives on use of the CE mark is: K OMPERNASS GMBH BURGSTRASSE 21 44867 BOCHUM, GERMANY The conformity declaration can[...]

W arranty and Ser vice Y ou receive a 3-year w arranty for this device as of the purchase d ate. Should you have grounds for complaint in spite of our high quality standards, please contact our Service Hotline. In the event that processing of y our complaint is not possible by telephone her e you will receive • a processing number (RMA number) as[...]

Fill in this section and submit it wit h the device! Sender , please write clearly : Last name First name Street Zipcode/City Countr y T elephone Date/Signature W arranty DES Ltd T el.: 0870/787-6177 Fax: 0870/787-6168 e-mail: suppor t.uk@k ompernass.com Irish Connection T el: 00353 (0) 87 99 62 077 Fax: 00353 18398056 e-mail: suppor t.ie@k omperna[...]

Description of fault :  IB_KH2150_JOE23594_LB3bcI.qxd 05.08.2008 16:52 Uhr Seite 36[...]