Sony BRC-H700 manual

Operating Instructions 3-903-974- 15 (1) HD 3CCD Color Video Camera © 2005 Sony Corporation BRC-H700 Using the VISCA RS-422 Connector Plug 1 Insert a wire (A WG Nos. 28 to 18) into the desired wire opening on the VISC A RS-422 connector plug, and tighten the scre w for that wire using a flat - head scre wdri v er . 2 Insert the VISCA RS-422 connec[...]

2 Owner’ s Record The model and seria l numbers are locat ed on the bott om. Record these numbers i n the spaces pr ovided bel ow . Refer to these nu mbers whene v er you ca ll upon y our Sony d ealer re gar ding this pr oduct. Model No. BRC-H 700 Serial No. T o reduce a risk of fire or electr ic shoc k, do not expose this pr oduct to rain or moi[...]

T able of Content s 3 T ab le of Contents Getting Started Prec autions .. .................. .................. ....................... 5 Phenomena Speci fi c to CCD Imag e Sensors ....... 5 Overvie w Fe ature s ................ ........................... .................. ..... 6 System Components ....................... .................. .....[...]

T able of Content s 4 Adjusting the Brightness ........ .................. ........ 47 Stor ing t he Cam era S ettin gs in Me mory – Pre setting F eat ure ........................... ................. 48 Storing Camera Settings .................. ................. 48 Setting t he Speed of the Camer a Movin g to a Preset Posi tion .... ...........[...]

Getting St arted Precautio ns / Phenomena Specific to CCD Image Sensors 5 Getting Started Precauti ons Operating or storage location Operating or storing the camera in the follo wing locations may cause damage to the camera: • Extre mely hot or cold pl aces (Op erating t emperature: 0 ° C to 40 ° C [32 ° F to 104 ° F]) • Exposed in d irect [...]

Ov erview F eatures 6 Overvie w Featur es Compact, HD 3CC D video camera with bu ilt-in pan/tilt/zoom functions • The camera integrat es the HD 3CCD camera block, pan/tilt mech anism, and 12-magnif icatio n optical zoom with 4-magnif ica tion di gital z oom in a compact body . The compact ness and inte gration al lo w the camera versat ile usage.[...]

Ov erview System Compon ents 7 External video sync function The camera is equi pped with an e xternal vid eo sync function t o synchro nize t he camera imag es on multi ple cameras. The camera also has an anal og component / RGB output connector as standard equipment. T ally lam p The tally lamp of the camera al lo ws you to mak e sure it is select[...]

Ov erview System Co mponent s 8 European model Remote co mmande r (1) Ceiling bracket (A) (1) Ceiling bracket (B) (1) Wire r ope (1) Scr ew 3 M3 × 8 (7)/ Stainl ess scre w 3 M4 × 8 (1) RS-42 2 conn ector plug (1) Oper ating Instruc tions (1) Optional Products RM-BR300 Re mote Control Unit The jo ystick of the r emote cont rol uni t all o ws you c[...]

Ov erview System Compon ents 9 CCFC-M100HG Optical Fiber Cable This is a 2-core multi-mode optical fi ber cabl e of 100 m (328 feet ) long. Supplied acce ssories: e xtensi on plug HFBK-SD1 SD Interfa ce Board Insert the b oard into the c amera or the HD Op tical Multiple x Unit to allo w outpu t of an analog video signal such as th e composi te vid[...]

Ov erview System Co nfigur ation 10 System Config urati on The BRC-H700 HD 3C CD Color V ideo Camer a has v arious syst em conf igurati on capabil ities using optional product s. This section describes ni ne typical syst em examples with the required comp onents and the main usag e of each system. Operating a BRC-H700 Camera Using the Supplied Remo[...]

Ov erview System Co nfigur ation 11 Operating Multip le BRC-H700 Cameras Using the RM-BR300 Rem ote Control Unit This s ystem a llows you: • T o operate up to se ven cameras remotel y using a si ngle Remote C ontrol Uni t • T o perform pan/ti lt and zo om operation s comfort ably using the jo ystick System con figur atio n , Video signal Remote[...]

Ov erview System Co nfigur ation 12 Operating a BRC-H700 Camera from a Long Distance This s ystem a llows you: • T o operate the camera remot ely from a distance up to 1,00 0 m (3,281 fe et) • T o perform pa n/til t and zoom ope rations comforta bly using the jo ystick • T o transmit the video signal and contro l signal of th e camera to a di[...]

Ov erview System Co nfigur ation 13 Operating Multiple BRC-H700 Cameras fr om a Long Distance This s ystem a llows you: • T o operate up to se ven cameras remotel y from a di stance up to 1,000 m (3,2 81 feet) • T o perform pan/ti lt and zo om operation s comfort ably using the jo ystick • T o transmit the video signa l and cont rol signal of[...]

Ov erview System Co nfigur ation 14 Using BRC-H700 Cameras and VI SCA-contr ollab le Came ras i n the Same System This s ystem a llows you: • T o operate up t o sev en c ameras supp orting th e VISCA prot ocol such as EVI -D30/D30P , EVI-D70/D70P , EVI-D100/ D100P and BRC -300/30 0P remotely u sing a si ngle RM-B R300 Remote C ontrol Uni t • T [...]

Ov erview System Co nfigur ation 15 T ransmitting Audio Signals Usin g the BRU-H700 This s ystem a llows you: • T o operate the camera remotely from a distance up t o 1,000m (3,281 fee t) • T o perform pan/ti lt and zo om operation s comfort ably using the jo ystick • T o transmit the video si gnal and co ntrol signal of the camera, an d the [...]

Ov erview System Co nfigur ation 16 Using the HFBK-TS1 HD V Interface Boar d to Input the Video and A udio Signals Mixe d to the HD V Video Equipment This s ystem a llows you: • T o input the vid eo signal of t he camera t o the HD V video eq uipment • T o input the v ideo signal of the camera and the audio signal via the HF BK-TS1 HD V Int erf[...]

Ov erview System Co nfigur ation 17 T ransmitting the A u dio Signal Usi ng the BRBK-H700 HD Optical Multiplex Car d and the HFBK-TS1 HD V Interface Boar d This s ystem a llows you: • T o operate the camera remotely from a distance up t o 1,000m (3,281 fee t) • T o perform pan/ti lt and zo om operation s comfort ably using the jo ystick • T o[...]

Ov erview Locatio n and Function of P arts 18 Location and Function of P ar ts Camera Fr ont A Lens This is a 12-magni ficat ion opt ical zoom l ens. Note Y ou canno t per form pan/t ilt ope ration with a wide or te lephoto co n v ersion l ens attache d. B T ally lamp Lights i n red when a VISCA t ally command is recei ved or the camera is selected[...]

Ov erview Location and Function of P arts 19 O EXT SYNC IN connector Accepts e xtern al vide o sync signal s. P Car d sl ot Insert an optional interf ace board, HF BK-HD1, HFBK-SD1, HFBK -XG1, HFBK-TS1 or BRBK - H700. The slot cov er is attach ed to the camera at the factory . Q RGB/COMPONENT connector Supplies the imag es as analog comp onent (YPb[...]

Ov erview Locatio n and Function of P arts 20 Remote Comm ander (supplied) A CAMERA SELE CT buttons Press the b utt on corre spondin g to the came ra you want to o perate with the Remot e Commander . The camera nu mber can be set using the IR SELECT switch on the rear of th e camera. Note If two or mo re cameras are adjacent and ha v e the same cam[...]

Ov erview Location and Function of P arts 21 Installing batteries Caution T o avoid r isk of ex plos ion, use R6 ( siz e AA ) ma ngan ese or alkaline batteri es. RM-BR300 Remote Contr ol Unit (not supplied) This manual e xplains t he operation s of the R M-BR300 Remote Cont rol Unit when it is used with BR C-H700 cameras. For operations with other [...]

Ov erview Locatio n and Function of P arts 22 When A UTO is sel ected, the A UTO i ndicator li ghts and the F OCUS control and the ONE PUSH AF bu tton are disabled. When MANU AL is sel ected, th e FOCUS control and the ONE PUSH AF b utton are enabl ed (with the FOC US indica tor lit). G ONE PUSH AF button Press this button to perform t he one-pu sh[...]

Ov erview Location and Function of P arts 23 Hold d o wn this b utton and press CA MERA button 1 to 7 to turn on/of f t he po wer of the c amera correspondi ng to the p ressed b utton. S CAME RA bu ttons Press one of the b uttons to select the camera from among thos e connected. The select ed CAMERA b utton lights in blue. T POSITION buttons Y ou c[...]

Ov erview Locatio n and Function of P arts 24 BR U-H700 HD Optical Multiple x Unit (not supplied) Fr ont A P ower switch T urns on/off the power of the H D Opt ical Mult iplex Unit. T u rn on the po wer of t he BRC-H700 camera before you turn on the HD Optica l Multipl ex Unit. B P ower indica tor Lit in green: The HD Opt ical Multip lex Unit is in[...]

Ov erview Location and Function of P arts 25 M VISCA RS-422 conn ector Connect to the VISCA RS-422 conn ector of the camera or anot her BR U- H700 HD Optical Mult iplex Unit. For the connect ion to the VI SCA RS-422 connector , see “Usin g the VISCA RS-422 Connector Plug” on back co ver. N VISCA FUNCT ION switches These switches are used for th[...]

Ov erview Locatio n and Function of P arts 26 C HD-SDI c onnector ( BNC ty pe) Supplies HD-SDI signal s that confor m to the SMPTE292M serial digital interf ace standards. The two co nnectors o utput the same si gnal. HFBK-XG1 XGA Interface Boar d (not supplied) A MONITOR conn ector (D-sub 15-p in) Suppli es video si gnals after con v ersion to V G[...]

Adjust ing and Setti ng With Menus About On- Scree n Menus 27 Adjusting and Se tting With Men us About On-Scre en Men us Y ou can chan ge v arious set tings, such a s shooting condit ions and sy stem setup of th e camera, whil e observing menu s displayed o n a connected monitor . Thi s sec tio n expl ains how to read the o n- scree n m enus before[...]

Adjust ing and Setti ng With Menus Oper ation Thro ugh Menus 28 Operation Thr ough Men us This secti on expla ins ho w to operate t he menu using the supplied Remote Commander , or using the RM-BR300 Remo te Co ntro l Un it ( not s uppl ie d). For det ails on eac h menu, see pa ges 30 thr ough 38. Menu Operation Using the Supplied Remote Comm ander[...]

Adjust ing and Setti ng With Menus Operat ion Th rough Menus 29 Menu Operation Using the RM- BR300 Remote Contro l Unit 1 Press the M AIN button. The main menu appears. 2 Move the cursor to the menu ite m to be set by inclini ng th e joysti ck for ward or backw ard. 3 Press th e button on th e top of th e joystick . The sele cted menu appe ars. 4 M[...]

Adjust ing and Setti ng With Menus EXPOSU RE Menu 30 EXPOSURE Menu The E XPOSU RE menu is use d to set t he item s regarding the ex posure. ND (ND filter) Indicate s the setti ng of the built-in ND f ilter in th e camera. OFF , 1 or 2 will be displayed. The ND setting is selectable with th e ND select switch on the camera , and cannot be select ed [...]

Adjust ing and Setti ng With Menus COLOR Menu 31 Using the ND Filter Y ou can use t he bu ilt-in ND f ilter o f the camera according to t he brightness of the o bject to be sho t. Select the ND filter setting on the ND filter selec t switch at the bottom o f the camera b lock. Note Y ou can check t he current setting of t he ND fil ter select switc[...]

Adjust ing and Setti ng With Menus PICTURE Menu 32 intensity i ncreases in the + di rection, and decre ases in the – directi on. HUE: Adjusts the color tint of an image. The adjusta ble range is from –7 to +7. The red tint increases in t he + direction, a nd the gr een tint increases i n the – direc tion. PICTURE Menu The PICT URE menu is u s[...]

Adjust ing and Setti ng With Menus FOCUS Menu 33 ST AN D ARD: Sets nor mal picture bl ur compensat ion. HARD: Sets maximum pict ure blur co mpensation. Note This fe ature does not functi on while t he camera is panning or t ilting. B&W (black and white mode) When this it em is set to ON, an ima ge is shot in black and white. COLOR B AR When t h[...]

Adjust ing and Setti ng With Menus P A N TIL T ZOOM Menu 34 P AN TIL T ZOOM Men u The P AN TIL T ZOOM menu is used to select the pan/ tilt/z oom mode. P AN-TIL T LIMIT When you set P AN to ON, you can selec t the li mit of pan operatio n with the LE FT and RIGH T setting it ems. When y ou set TIL T to ON, you can select th e limit of tilt operation[...]

Adjust ing and Setti ng With Menus SYSTE M Menu 35 SYSTEM Menu IR-RECEIVE (infrare d signal reception) When it is set to OF F , the camera doe s not recei v e the signal from t he supplie d Remote Commander . Be sure to keep it ON when you use the supplied Remote Commander . Note Y ou cannot set I R-RECEIVE to OFF when you operate the menu using t [...]

Adjust ing and Setti ng With Menus ST A TUS Menu / DOWN CONVER TER Men u 36 ST A TUS Menu The ST A TUS menu is u sed to display th e settings selected with th e menus. The ST A TUS menu consi sts of P A GE 1 to P A GE5. Thi s menu only di splays the current menu settings, and y ou cannot chan ge them with the menu . PA G E 1 : Shows the settings se[...]

Adjust ing and Setti ng With Menus HD-SDI Menu 37 Note This menu i tem does not appear when a n HD signal of 50i format i s output or when RGB is select ed in D-S UB OUT1. The SETUP sett ing is a v a ilable whe n YPbPr is selected in D-SUB OUT1. If your HFBK-SD1 Interf ace Board is a for mer v ersion, t he SETUP i tem does not appear e v en when YP[...]

Adjust ing and Setti ng With Menus PC-OUTPU T Men u / HD V Menu 38 PC-OUTPUT Menu The PC-O UTPUT menu is d isplayed on ly when t he HFBK-XG1 XGA Interface Board is inserted i nto the card slot of the camera. IMG-SIZE (ima ge size) Select the si gnal format an d aspect ratio o f the outpu t signal. XGA [CROP]: Outputs XGA (4:3 edge crop). VGA [LETTE[...]

Opera tion Using th e Supp lied Remote Commande r T ur ning on the P ower / Pan /Tilt and Zoom Operat ion 39 Before operating, chec k that the camera and peripheral de vices ar e properly insta lled and co nnected. For det ails, see “Inst allation” (page 50) and “Connecti ons” (page 57) . T urning on the P o we r 1 Connect the camera t o an[...]

Opera tion Using th e Supp lied Remote Commande r P an/Tilt and Zoom Oper ation 40 Note The setting abo v e only ch anges the si gnal emitted from the Remote Commander , and does not change the setting of the camera itself. T herefore, repeat the set ting for each Remote Commander i f you are using more than one Remote Commander . If the ST ANDBY l[...]

Opera tion Using th e Supp lied Remote Commande r Adjusting t he Camera 41 Adjusting the Camera Focusing on a Subject T o fo cus the ca mera on a subje ct automatically Press the A UTO b utton. The camera focuses o n the subject at the center of the screen automatically . T o fo cus the ca mera on a subje ct manua ll y After pressing the MANU AL bu[...]

Opera tion Using th e Supp lied Remote Commande r Storing th e Camera Se ttings in Memo ry – Preset ting F eature 42 Storin g the Came ra Settings in Memor y – Presetting Feature Up to six com binations o f settings (si x positions) includi ng camera posit ion, zoomi ng, focusin g, and backlighti ng, can be preset . Note The camera can store up[...]

Operati on Using the RM-BR300 Remote Cont rol Unit T ur ning on the P o we r 43 Before operating, check t hat the camera, the RM-BR300 Remote Cont rol Un it and per iphera l de vices a re properly install ed and connect ed. For det ails, see “Inst allation” (page 50) and “Connecti ons” (page 57) . T urning on the P o we r 1 Connect the came[...]

Operati on Using the RM-BR300 Remote Cont rol Unit P an/Tilt and Zoom Oper ation 44 3 Hold do wn the RESE T b utton and press t he PO WER button on the Remot e Contro l Unit. The Remote Control Unit recognizes the connected cameras and assi gns them camera addr esses 1 to 7 automat ically i n the conne cted orde r . 4 Press the P O WER button on th[...]

Operati on Using the RM-BR300 Remote Cont rol Unit P an/Tilt and Z oom Oper ation 45 If the camera mo ves in a diff erent direction from that y ou intended The camera is preset to face to w ard the right when e ver the joystic k is inclined to the righ t. Y ou might wish to face the ca mera to ward th e opposite directi on from that in which you in[...]

Operati on Using the RM-BR300 Remote Cont rol Unit Adjusti ng the Camer a 46 Adjusting the Camera Focusing on a Subject T o fo cus the ca mera on a subject automatically Press the A UTO/MANU AL bu tton so t hat the A UTO indicat or lights. The camera focuses on t he subject in the center of the screen automatically . T o fo cus the ca mera on a sub[...]

Operati on Using the RM-BR300 Remote Cont rol Unit Adjusting t he Camera 47 2 Press the MODE b utton so that the R an d B indic ator s on the V ALUE/ R and B RIGHT /B controls li ght (W hite bal ance adj ustment mode). 3 Adjust the red ga in with the R contro l and the blue gain with the B cont rol. Functi ons of th e R and B controls When the whit[...]

Operati on Using the RM-BR300 Remote Cont rol Unit Storing th e Camera Se ttings in Memo ry – Preset ting F eature 48 Storin g the Came ra Settings in Memor y – Presetting Feature Up to sixtee n combinati ons of setting s (sixteen positions), i ncluding camera positi on, zooming, focusing, an d back lighting, can be st ored in the memory of the[...]

Operati on Using the RM-BR300 Remote Cont rol Unit Storing t he Camer a Se ttings in Memory – Pres etting F eature 49 Setting the Speed of the Camera Mo ving to a Preset P osition Y ou can sel ect the pannin g/tilting speed when the camera mov es to a prese t position. 1 Press the CAMERA butt on to select the camera whose speed you w ant t o set.[...]

Installat ion a nd Connec tions Instal lation 50 Installation and Conn ections Inst allati on Remo ving/Attac hing the Cab le Co ver T o remove the c able cover The cable cov er is attached t o the camera at the factory . Y ou can remo v e it, if necessary . 1 Release the tw o scre ws on the cable co ve r . 2 Hold the lo wer end s of the cable co v[...]

Installat ion a nd Connec tions Install ation 51 2 Insert an option al interface board i nto the card sl ot. Align both ends of the interf ace board with th e sliders inside the slot, then insert the board securely as far as it will go. 3 T ighten the tw o scr ews on t he in terf ace board. T o remo ve the interfa ce boar d Loosen the tw o scre ws [...]

Installat ion a nd Connec tions Instal lation 52 Inst alling the Camer a in a Hig h Po s i t i o n Using the supplied ceiling brack ets, wire rope and scre ws, and the attac hment materi als (not sup plied), you can attach th e camera to a ceil ing or on a shel f, etc. in a high posi tion. When you instal l the camera, alway s install it on a le v [...]

Installat ion a nd Connec tions Install ation 53 Note For attachi ng the camera to the ceiling brack et, use only the suppl ied scre ws. Using o ther scre ws may damage the camera. 5 Attac h the attac hment materi als (not supplied) to the ceiling brack et (B), and install the brack et on the cei ling . Align the f hole on the cei ling bracke t (B)[...]

Installat ion a nd Connec tions Instal lation 54 8 Insert the prot rusions on the cei ling brack et (A) into the spaces pr epared in the ceiling bracke t (B) with the f hole on the cei ling brack et (A) aligned with the s hole on the cei ling brack et (B) , and temporarily at tach the m by turning the ce iling bracket (A) with the camera clock wise[...]

Installat ion a nd Connec tions Install ation 55 2 Remov e th e four scre ws on the bot tom of the camera to remov e the four feet . 3 Attach the ceiling bracket (A) t o the bottom o f the camera using the supplied fo ur scre ws ( 3 M3 × 8). Position the f hole on t he ceiling b racket (A) to th e front of the camera, al ign the scre w holes on t [...]

Installat ion a nd Connec tions Instal lation 56 6 Attach the other end of the wire rope to the materi al near the shelf, e tc. Use an M5 ( 3/16 inch) h exa gon sock et head cap scre w (not suppl ied). Attach th e wire rope to th e material indepe ndent of the shelf, etc. where the ceiling b racket (B) is att ached. 7 Insert the prot rusions on the[...]

Installat ion a nd Connec tions Connectio ns 57 9 Connect the cable s to the connect ors on the rear of the camera. Note T ake the prop er steps to ensure that the load of the cables connected d oes not cause p roblems. 10 Attach the cabl e cov er . For att achment, see pa ge 50. T o remo ve the camer a 1 Remove the three scre ws used to attach the[...]

Installat ion a nd Connec tions Connecti ons 58 Connecting the RM-BR300 Remote Control Unit Use the RS-232C connecting cable suppl ied with the Rem ote Co ntro l Unit . Note When using t he VISCA RS-232C connectors, che ck that the BO TT OM switch on t he bottom of the camera (page 19) an d the DIP switc h on th e bottom of the Remote Co ntrol Unit[...]

Installat ion a nd Connec tions Connectio ns 59 Connecting a Monitor , etc. Equipped with the Analog Component (YPbPr) Input Connector Connecting a Device Equipped with VISCA RS-232C Connector Connections wit h the VISCA RS-232 C cables (cross type) enable con trol of multiple cameras wit h a single RM- BR300 Re mote Co ntr ol U nit . to AC o utl e[...]

Installat ion a nd Connec tions Connecti ons 60 Y ou can conn ect the camera t o a computer e quipped with the VIS CA RS-232C conn ector inste ad of the connectio n to the RM- BR300 Remote Control Uni t. Note When using t he VISCA RS-232C connectors, che ck that the BO TT OM switch on t he bottom of the camera (page 19) an d the DIP switc h on th e[...]

Installat ion a nd Connec tions Connectio ns 61 Conn ecti ng a Vide o Moni tor Equipped wi th Analog RG B/ Component Connectors When you i nstall an optional HFBK-SD1 SD Interf ace Board into t he camera, yo u can output the sign al from the camera by con v erti ng it i nto co mponent vi deo, RGB, composite v ideo or S -video signa l. For details o[...]

Installat ion a nd Connec tions Connecti ons 62 Connecting a VTR Equipped wi th SDI Input C onnector When you install an optical HFBK-SD1 SD Interf ace Board in the camera, you can outpu t the si gnal from t he camera by con verting it int o an SDI signal that conforms to SMPTE259 M (for 59 .94i signal format) or ITU-R BT .656 (for 50i sig nal form[...]

Installat ion a nd Connec tions Connectio ns 63 Connecting a Computer When you i nstall an opt ional HFBK -XG1 XGA Interface Board int o the camera, y ou can output the signal from the ca mera by con verting it into a signa l compliant with the VESA (VGA, XGA or WXGA) standards. Connecting the BRU-H700 HD Optical Multiple x Unit When you i nstall a[...]

Installat ion a nd Connec tions Connecti ons 64 FUNCTION switch on the rear of the Optical Multipl ex Unit (page 25) a nd the DIP swit ch on the bottom of the Rem ote Cont rol Unit (pag e 23) are set to RS-232 C or RS-422 c orrect ly . Notes on use of th e CCFC-M100HG HD Optical Fiber C able • In order to pre v ent cable transmissi on loss, f ix [...]

Installat ion a nd Connec tions Connectio ns 65 Connecting a Sync Sig nal Generator T o connect a single camera T o connect multiple cameras to the HD sync signal generator Y ou can conn ect up to se v en cameras. 75-ohm ter mination s witch: ON EXT SYN C IN 75-ohm coaxial cable to SYNC OUT Sync signal generator to AC outlet Second BRC-H700 75-ohm [...]

Installat ion a nd Connec tions Connecti ons 66 T o connect multiple cameras to the SD sync signal generator Y ou can conn ect up to se ven cameras. Note Signal pr ocessing in the interf ace board c auses all outp ut sign als fro m the HFBK -SD1 to be d elayed by approximatel y 93H (hori zontal syn c time) c ompared with the YPbPr/RGB output signal[...]

Appendix List of Messages 67 Appendix List o f Mes sa ges The follo wing messages may ap pear on the screen. T ake the necessary measu res show n belo w . Indicato rs on the BRC-H700 camera Messages f or the BRC-H70 0 cam era Err or mess ages f or the BR U-H70 0 HD Optic al Multip lex Unit Indicator M eaning /remedies ST ANDBY lamp flashes. The cam[...]

Appendix T roubles hooting 68 T r oub les hooting Before bringing in your camera for servic e, check t he follo wing as a guide to troub leshoot the prob lem. I f the problem cannot be corr ected, consul t with your Sony dealer . Symptom C ause Remed y The po wer of th e camera is n ot turned on. The A C power adaptor is not connec ted to t he DC I[...]

Appendix T roubleshoot ing 69 The VISCA control is not av ailable with a compute r connecte d to the camera. The comp uter is not corr ect ly co nnect ed to the camera. Make sure the conn ection bet ween the computer and camera is made corre ctly . Check tha t the VISCA co ntrol sett ing (RS- 232C or RS-422) and the baud rate se tting (9600 b ps or[...]

Appendix Menu Config uration 70 Menu Configura tion The menus of the camera are conf igured as desc ribed belo w . The initial set tings of each item are in bold. EXPOSURE MODE FULL A UT O AE SPEED LOW , MID , HIGH AGC LIMIT 0dB, 6dB , 12dB, 18dB , OFF IRIS LIMIT F3.4, F4.0, F6.8, F11 MANU AL GAIN 0dB , 3dB, 6dB , 9dB, 12dB , 15dB, 18dB , HYPER SPE[...]

Appendix Menu Co nfigur ation 71 FOCUS MODE AU TO MANU AL (pa ge 33 ) P AN TIL T ZOOM P AN-TIL T LIMIT P AN ON OFF LEFT END, 169˚ – -169˚ RIGHT END , 169˚ – -69˚ TIL T ON OFF DOWN END , -29˚ – 90˚ UP END , -29˚ – 90˚ RAMP CUR VE MODE1, MODE2, MODE3 D-ZOOM OFF , ×1.5, × 2.0 , ×4.0 (pa ge 34 ) SYSTEM IR RECEIVE ON OFF IMG-FLIP ON O[...]

Appendix Menu Config uration 72 ST A TUS P A GE 1 EXPOSURE AE SPEED A GC LIMIT IRIS LIMIT EX COMP BACK LIGHT SPO T LIGHT FOCUS P AGE 2 WHITE BALANCE WB SENS WB SHIFT M. GAIN C . GAIN HUE DET AIL SKINT ONE DET AIL GAMMA P AGE 3 P AN-TIL T LIMIT P AN LEFT RIGHT TIL T DOWN UP RAMP CUR VE D-ZOOM P AGE 4 STEAD Y SHOT IR-RECEIVE IMG FLIP REVERSE P AN/TIL[...]

Appendix Menu Co nfigur ation 73 HD-SDI ANALOG OUT YP b P r SYNC/VD SYNC , VD RGB SYNC/VD SYNC , VD ADD SYNC RGB OFF (pa ge 37 ) PC-OUTPUT IMG SIZE XGA [CROP], V GA [LETTER] , XGA [LETTER] V GA [CR OP], WXGA SYNC OFF ON VD POS NEG (pa ge 38 ) HD V A UDIO DELA Y OFF , 1STEP , 2STEP , 3STEP , 4STEP , 5STEP , 6STEP , 7STEP , 8STEP , 9STEP , 10STEP (pa[...]

Appendix Prese tting Items 74 Presetti ng Items The follo wing setting items can be stored in the memory of t he camera. Preset ting menu i tems Presetting item Presetting position num ber 123456789 1 0 1 1 1 2 1 3 1 4 1 5 1 6 Pa n/tilt position aaaaaaaaaaaaaaaa Zoom position aaaaaaaaaaaaaaaa Digi ta l z oom on/ of f aaaaaaaaaaaaaaaa Auto/m anual f[...]

Appendix Pres etti ng Items 75 z : Setting items retained in memo ry when the po w er is turne d of f and on ag ain. The camera starts with these sett ings. a : Settin g items retai ned in memor y when the power is turned off and on again . f : Settin g items reta ined in me mory only wh en the power is turned on. – : Setting items cleared from t[...]

Appendix Specifications 76 Specifi cati ons System V ideo signal 1080/59. 94i, 1080/ 50i (swit ched with the B O TTOM swit ch) Synchroni zation Internal /e xterna l synchron izati on, autom atically switch ed Image de vice 1/3 type (6 mm), 3CCD Interline transfer type T otal picture elements: Approx. 1,120,000 pi xe ls Ef fecti v e picture ele ment[...]

Appendix Specifications 77 Dimensions BRC-H70 0 Video Camera 310.8 (12 1 / 4 ) 5 ( 7 / 32 ) ø207 (8 1 / 4 ) 205 (8 1 / 8 ) 90 (3 5 / 8 ) ø195 (7 3 / 4 ) ø164 ( 6 1 / 2 ) 30˚ 90 ˚ 30 ˚ 50(2) 50 (2) 50(2) 20 ( 13 / 16 ) 20 ˚ 20 ( 13 / 16 ) 20 ( 1 3 / 1 6 ) 4-ø4.2 23.1 ( 15 / 16 ) ø8.2 ( 11 / 32 ) 30 (1 3 / 16 ) Unit: mm (inches) Front Bottom[...]

Appendix Specifications 78 RM-BR300 Re mote Control Unit 1 1 9 LOCK MODE VALUE RESET MENU PRESET SHIFT L/R DIRECTION PAN E L LIGHT BLACK LIGHT PAN-TIL T RESET ONE PUSH AWB POWER AUTO MANUAL AUTO ONE PUSH AF 234 56 7 2 10 STD REV 3 11 4 POSITION CAMERA 12 5 13 6 14 7 15 8 16 R – + BRIGHT B – + FOCUS NEAR FAR 145.9 (5 3 / 4 ) 137.2 (5 1 / 2 ) 391[...]

Appendix Specifications 79 BRU-H700 HD Optic al Multiplex Unit 210 (8 3 / 8 ) 240 (9 1 / 2 ) 94 (3 3 / 4 ) 86 (3 1 / 2 ) 86 (3 1 / 2 ) Unit: mm (inches) Fr ont To p Side[...]

Appendix Specifications 80 Pin As sign me nts BRC-H700 Video Camera VISCA RS-422 co nnecto r (conne ctor plu g 9-pin) VISCA RS-232C IN conn ector (min i-DIN 8-pi n, fem a le) * The SIRCS OUT function is selectable with the BO TT OM switch on the bottom of the camera. VISCA RS -232C OUT c onnector (mini DIN 8-pin, female ) Analog RGB /COMPONENT (D-s[...]

Appendix Specifications 81 RM-BR300 Remot e Contr ol Unit (optional) VISCA RS-2 32C ou tput conne ctor (mini DIN 8- pin, f ema le) VISCA RS-42 2 connecto r (connecto r plug, 9-pin) T ALL Y/CONT A CT conn ector (con nector plug, 9-pin) BRU-H700 HD Optical Multiplex Unit (optional) VISCA RS-232C IN conn ector (min i DIN 8 -pin, fem a le) Pin No. Func[...]

Appendix Specifications 82 VISC A RS-232 C OUT con nect or (mi ni DIN 8- pin, fem a le) VISCA RS-422 co nnec tor (con nector p lug, 9-pin) Analog RGB /COMPONENT (D-s ub 15-pin ) Pin No. Funct ion 1 DTR OUT 2 DSR OUT 3 TXD OUT 4 GND 5 RXD OUT 6 GND 7 No Conn ection 8 No Conn ection Pin No. Funct ion 1 RXD OUT – 2 RXD OUT+ 3 TXD OUT – 4 TXD OUT+ [...]

Appendix Specifications 83 Wiring Diag ram of VISCA RS-422 Connection 1 RXD OUT – 2 RXD OUT + 3 TXD OUT – 4 TXD OUT + 5 GND 6 RXD IN – 7 RXD IN + 8 TXD IN – 9 TXD IN + 1 RXD OUT – 2 RXD OUT + 3 TXD OUT – 4 TXD OUT + 5 GND 6 RXD IN – 7 RXD IN + 8 TXD IN – 9 TXD IN + 1 RXD OUT – 2 RXD OUT + 3 TXD OUT – 4 TXD OUT + 5 GND 6 RXD IN ?[...]