Sony CCD-TRV99 manual

3-862-052- 12 (1) ©1998 by Sony Corporation CCD-TRV95/TRV99 CCD-TRV99 Model No. CCD-TRV Model No. AC-L Serial No. Serial No. Operating Instructions Before operating the unit, please read this manual thoroughly, and retain it for future reference. Owner’s Record The model and serial numbers are located on the bottom. Record the serial number in t[...]

2 Welcome! Congratulations on your purchase of this Sony Handycam Vision TM camcorder. With your Handycam Vision, you can capture life’s precious moments with superior picture and sound quality. Your Handycam Vision is loaded with advanced features, but at the same time it is very easy to use. You will soon be producing home video that you can en[...]

3 Before you begin Using this manual ................................... 4 Checking supplied accessories .............. 6 Getting started Installing and charging the battery pack ............................................................. 7 Inserting a cassette ................................ 11 Basic operations Camera recording ................[...]

4 The instructions in this manual are for the two models listed below. Before you start reading this manual and operating the unit, check your model number by looking at the bottom of your camcorder. The CCD-TRV99 is the model used for illustration purposes. Otherwise, the model name is indicated in the illustrations. Any differences in operation a[...]

5 [a] [b] Note on TV color systems TV color systems differ from country to country. To view your recordings on a TV, you need an NTSC system-based TV. Precaution on copyright Television programs, films, video tapes, and other materials may be copyrighted. Unauthorized recording of such materials may be contrary to the provision of the copyright law[...]

6 Checking supplied accessories Check that the following accessories are supplied with your camcorder. 1 Wireless Remote Commander (1) (p. 103) RMT-717: CCD-TRV99 RMT-708: CCD-TRV95 2 AC-L10A/L10B/L10C AC power adaptor (1), Power cord (1) (p. 8, 27) 3 NP-F330 Battery pack (1) (p. 7, 27) 4 CR2025 Lithium Battery (1) (p. 81) The lithium battery is al[...]

7 Getting started Before using your camcorder, you first need to install and charge the battery pack. This camcorder operates only with the “InfoLITHIUM” battery. “InfoLITHIUM” is a trademark of Sony Corporation. Installing the battery pack ( 1 ) Lift up the viewfinder. ( 2 ) While pressing BATT RELEASE, slide the battery terminal cover in [...]

8 POWER OFF VTR CAMERA Installing and charging the battery pack Charging the battery pack Charge the battery pack on a flat surface without vibration. The battery pack is charged a little in the factory. ( 1 ) Open the DC IN jack cover and connect the supplied AC power adaptor to the DC IN jack with the plug’s 4 mark up. ( 2 ) Connect the power c[...]

9 Getting started Installing and charging the battery pack Charging time Battery NP-F330 NP-F530/F550 NP-F730/F730H/ NP-F930/F950 pack (supplied) F750 Charging 150 210 300 390 time* (min.) (90) (150) (240) (330) The time required for a normal charge is indicated in parentheses. * Approximate minutes to charge an empty battery pack using the supplie[...]

10 Notes on remaining battery time indication during recording • Remaining battery time is displayed in the viewfinder or on the LCD screen. However, the indication may not be displayed properly, depending on using conditions and circumstances. • When you close the LCD panel and open it again, it takes about 1 minute for the correct remaining t[...]

11 Getting started Make sure that the power source is installed. When you want to record in the Hi8 system, use Hi8 video cassette H . ( 1 ) While pressing the small blue button on the EJECT switch, slide it in the direction of the arrow. The cassette compartment automatically lifts up and opens. ( 2 ) Insert a cassette with the window facing out. [...]

12 2 3 1 L O C K START/STOP S T A N D B Y L O C K START/STOP S T A N D B Y 40min SP H STBY 0:00:00 POWER OFF VTR CAMERA 40min SP H REC 0:00:01 Basic operations Camera r ecording Make sure that the power source is installed and a cassette is inserted and that the START/STOP MODE switch inside the LCD panel is set to . Before you record one- time eve[...]

13 Basic operations To stop recording momentarily [a] Press START/STOP again. The “STBY” indicator appears in the viewfinder (Standby mode) . To finish recording [b] Press START/STOP again. Turn STANDBY down to LOCK and set the POWER switch to OFF. Then, eject the cassette. Note There is a little wear on the battery pack which is installed with[...]

14 Camera recording Note on Standby mode If you leave the camcorder in Standby mode for 5 minutes while the cassette is inserted, the camcorder turns off automatically for saving battery power as well as for preventing the battery and tape from wearing down. To resume Standby mode, turn STANDBY down and up again. To start recording, press START/STO[...]

15 Basic operations T W T W W T T W T W [a] [b] Camera recording Using the zoom feature Zooming is a recording technique that lets you change the size of the subject in the scene. For more professional-looking recordings, use the zoom function sparingly. “T” side: for telephoto (subject appears closer) “W” side: for wide-angle (subject appe[...]

16 Selecting the START/STOP mode Your camcorder has three modes. These modes enable you to take a series of quick shots resulting in a lively video. ( 1 ) While pressing OPEN, open the LCD panel. ( 2 ) Set START/STOP MODE to the desired mode. : Recording starts when you press START/STOP, and stops when you press it again (normal mode). ANTI GROUND [...]

17 Basic operations Shooting with the LCD screen You can also record the picture while looking at the LCD screen. When using the LCD screen, the viewfinder turns off automatically. You cannot monitor the sound from the speaker during recording. ( 1 ) While pressing OPEN, open the LCD panel. ( 2 ) Adjust the angle of the LCD panel. The LCD panel mov[...]

18 Notes on the LCD panel • When closing the LCD panel, turn it vertically until it clicks [ a ] . • When turning the LCD panel, turn it always vertically; otherwise, the camcorder body may be damaged or the LCD panel may not close properly [ b ] . • Close the LCD panel completely when not in use. Letting the subject monitor the shot (Mirror [...]

19 Basic operations 3 2 1 Hints for better shooting [a] [ b] For hand-held shots, you’ll get better results by holding the camcorder according to the following suggestions: • Hold the camcorder firmly and secure it with the grip strap so that you can easily manipulate the controls with your thumb. • Place your right elbow against your side. ?[...]

20 Hints for better shooting Place the camcorder on a flat surface or use a tripod Try placing the camcorder on a table top or any other flat surface of suitable height. If you have a tripod for a still camera, you can also use it with the camcorder. When attaching a non-Sony tripod, make sure that the length of the tripod screw is less than 9/32 i[...]

21 Basic operations Checking the recor ded pictur e Using EDITSEARCH, you can review the last recorded scene or check the recorded picture in the viewfinder or on the LCD screen. ( 1 ) While pressing the small green button on the POWER switch, set it to CAMERA. ( 2 ) Turn STANDBY up to STANDBY. ( 3 ) Press the Р( Π) side of EDITSEARCH momentar[...]

22 Playing back a tape You can monitor the playback picture on the LCD screen. ( 1 ) While pressing the small green button on the POWER switch, set it to VTR. The video control buttons light up. ( 2 ) Insert the recorded tape with the window facing out. ( 3 ) While pressing OPEN, open the LCD panel. Adjust the angle of the LCD panel or the brightne[...]

23 Basic operations When monitoring on the LCD screen You can turn the LCD panel over and move back to the camcorder with the LCD screen facing out [ a ] . You can adjust the angle of the LCD screen by turning the LCD screen up to 15 degrees [ b ] . Using the remote commander You can control playback using the supplied Remote Commander. Before usin[...]

24 Various playback modes With CCD-TRV99, you can enjoy clear pictures during still, slow and picture search. With CCD-TRV95, you can enjoy clear pictures on the LCD screen during still, slow and picture search. (Crystal-clear still/slow/picture search) To view a still picture (playback pause) Press P during playback. To resume playback, press P or[...]

25 Basic operations Displaying the date or time when you recorded - Data Code function – CCD-TRV99 only Even if you did not record the date or time when you were recording, you can display the date or time when you recorded (Data Code) on the TV during playback or editing. The Data Code is also displayed in the viewfinder and on the LCD screen. T[...]

26 You can go to the end of the recorded portion after you record and play back the tape to make the transition between the last scene you recorded and the next scene smooth. The tape starts rewinding or fast-forwarding and the last 5 seconds (10 seconds in LP mode) of the recorded portion play back. Then the tape stops at the end of the recorded p[...]

27 Advanced operations Advanced operations Using alternative power sources 2, 3 1 You can choose any of the following power sources for your camcorder: battery pack, house current, alkaline batteries and 12/24 V car battery. Choose the appropriate power source depending on where you want to use your camcorder. Place Power source Accessory to be use[...]

28 Using alternative power sources Using alkaline batteries Use the battery case (supplied) and six size AA (LR6) Sony Alkaline batteries (not supplied). ( 1 ) Remove the battery holder from the battery case. ( 2 ) Insert six new alkaline batteries into the battery holder, following the marking on the holder to be sure the batteries are installed i[...]

29 Advanced operations Using a car battery Use Sony DC-V515A car battery charger (not supplied). Connect the car battery cord to the cigarette lighter socket of a car (12 V or 24 V). Refer to the operating instructions of your car battery charger. To remove the car battery charger The car battery charger is removed in the same way as the battery pa[...]

30 Changing the mode settings You can change the mode settings in the menu system to further enjoy the features and functions of the camcorder. ( 1 ) Press MENU to display the menu. ( 2 ) Turn the control dial to select the desired icon in the left side of the menu, then press the dial. ( 3 ) Turn the control dial to select the desired item, then p[...]

31 Advanced operations Notes on changing the mode setting • Menu items differ depending on the setting of the POWER switch to VTR or CAMERA. • When you let the subject monitor the shot (mirror mode), the menu display does not appear. Selecting the mode setting of each item Items for both CAMERA and VTR modes LCD B. L.* <BRT NORMAL/BRIGHT>[...]

32 Changing the mode settings LTR SIZE* <NORMAL/2x> • Normally select NORMAL. • Select 2x to display selected menu item by twice size of normal. BEEP* <ON/OFF> • Select ON so that beeps sound when you start/stop recording, etc. • Select OFF when you do not want to hear the beep sound. COMMANDER <ON/OFF> • Select ON when [...]

33 Advanced operations Changing the mode settings ORC TO SET* Select this item to automatically adjust the recording condition to get the best possible recording. If you have already performed this function, “ORC ON” is displayed. CLOCK SET* Reset the date or time. AUTO DATE* <ON/OFF> (CCD-TRV95 only) • Select ON to record the date for [...]

34 Changing the mode settings Items for VTR mode only HiFi SOUND <STEREO/1/2> • Normally select STEREO. • Select 1 or 2 to play back a dual sound track tape. EDIT <ON/OFF> • Select ON to minimize picture deterioration when editing. • Normally select OFF. TBC* <ON/OFF> • Normally select ON, to correct for jitter. • Sele[...]

35 Advanced operations When you shoot a subject with the light source behind the subject or a subject with a light background, use the BACK LIGHT function. Press BACK LIGHT. The c indicator appears in the viewfinder or on the LCD screen. [ a ] Subject is too dark because of backlight. [ b ] Subject becomes bright with backlight compensation. After [...]

36 Selecting the fader function You can fade in or out to give your recording a professional appearance. When the picture fades in, the sound gradually increases. When the picture fades out, the sound gradually decreases. Using the F ADER function [a] REC STBY REC STBY [b] MONOTONE When fading in, the picture gradually changes from black and white [...]

37 Advanced operations Using the FADER function 1 FADER M.FADER STRIPE BOUNCE MONOTONE OVERLAP WIPE FADER 2 L O C K START/STOP S T A N D B Y Using the fader function When fading in [a] ( 1 ) While the camcorder is in Standby mode, press FADER until the desired fade indicator flashes. ( 2 ) Press START/STOP to start recording. The fade indicator sto[...]

38 To cancel the fader function Before pressing START/STOP, press FADER until the indicator disappears. When the date, time or title is displayed The date, time indicator and title do not fade in or fade out. When the START/STOP MODE switch is set to 5SEC or You cannot use the fader function. Notes on the fader function • While using the bounce f[...]

39 Advanced operations The NightShot function enables you to shoot a subject in a dark place. You can achieve a satisfactory recording of the ecology of nocturnal animals for observation with this function. This function may record picture nearly in monochrome. ( 1 ) While the camcorder is in Standby mode, slide NIGHTSHOT to ON. ( 2 ) Press START/S[...]

40 – CCD-TRV99 only You can record a still picture like a photograph for about seven seconds. This mode is useful when you want to enjoy a picture such as a photograph or when you print a picture using a video printer (not supplied). We recommend you to use a video flash light (not supplied) when shooting in the dark. Attach the video flash light[...]

41 Advanced operations Notes on photo recording • During photo recording, you cannot change the mode or setting of following functions. – Functions using the DIGITAL EFFECT button – Functions using the FADER button – Functions using the PROGRAM AE button – Functions using the PICTURE EFFECT button – Exposure – Wide mode • The PHOTO [...]

42 Selecting the desired mode You can record a cinemalike picture (CINEMA) or a 16:9 wide picture to watch on the 16:9 wide-screen TV (16:9 FULL). CINEMA Black bands appear at the top and the bottom of the screen, and the viewfinder or LCD screen [ a ] and a normal TV screen [ b ] look wide. You can also watch the picture without black bands on a w[...]

43 Advanced operations Using the wide mode function You can select the wide mode (OFF, CINEMA, 16:9FULL) in the menu system (p. 30). To cancel wide mode Select OFF in the menu system. To watch the tape recorded in wide mode To watch the tape recorded in CINEMA mode, set the screen mode of the wide-screen TV to zoom mode. To watch the tape recorded [...]

44 Using the PROGRAM AE function Selecting the best mode You can select one of six (CCD-TRV95) or seven (CCD-TRV99) PROGRAM AE (Auto Exposure) modes to suit your shooting situation, referring to the following. Spotlight mode For subjects in spotlight, such as at the theater or a formal event. a Soft Portrait mode For zooming in on a still subject i[...]

45 Advanced operations Using the PROGRAM AE function ( 1 ) Press PROGRAM AE. ( 2 ) Turn the control dial to select the desired PROGRAM AE mode. To turn off program AE Press PROGRAM AE. Notes on focus setting • In the Spotlight, Sports lesson and Beach & Ski modes, you cannot take close-ups because the camcorder is set to focus only on subject[...]

46 Superimposing a still pictur e on a moving pictur e – CCD-TRV99 only Using the still function, you can record a still picture to be superimposed on a moving picture. The sound is recorded normally. ( 1 ) While the camcorder is in Standby mode or recording mode, press DIGITAL EFFECT and turn the control dial until the STILL indicator flashes. ([...]

47 Advanced operations Recor ding still pictures successively – CCD-TRV99 only Using the flash motion function, you can record still pictures successively at constant intervals. The sound is recorded normally. ( 1 ) While the camcorder is in Standby mode or recording mode, press DIGITAL EFFECT and turn the control dial until the FLASH indicator f[...]

48 – CCD-TRV99 only Using the luminancekey function, you can replace a brighter portion of a still picture with a moving picture. For example, you can superimpose the favorite scene on the background if you store the picture in memory as a still picture, such as a person in a bright background. The sound is recorded normally. ( 1 ) While the camc[...]

49 Advanced operations – CCD-TRV99 only Using the trail function, you can record the picture which leaves an incidental image, such as a trail. The sound is recorded normally. You can adjust the vanishing time of the incidental image with the control dial. ( 1 ) While the camcorder is in Standby mode or recording mode, press DIGITAL EFFECT and tu[...]

50 – CCD-TRV99 only If you want to record a dark picture more brightly, or make the movement of the subject seem lively, set the shutter speed to 1/25, 1/12, 1/6 or 1/3 (slow shutter). ( 1 ) While the camcorder is in Standby mode or recording mode, press DIGITAL EFFECT and turn the control dial until the SLOW SHTR (shutter) indicator flashes. ( 2[...]

51 Advanced operations Adding an old movie type atmospher e to pictur es – CCD-TRV99 only Using the old movie function, you can record the picture such as an old movie. The camcorder automatically sets the wide mode to CINEMA, picture effect to SEPIA, and the appropriate shutter speed. ( 1 ) While the camcorder is in Standby mode or recording mod[...]

52 [a] [b] [c] [d] Focusing manually When to use manual focus In the following cases you should obtain better results by adjusting the focus manually. • Insufficient light [ a ] • Subjects with little contrast - walls, sky, etc. [ b ] • Too much brightness behind the subject [ c ] • Horizontal stripes [ d ] • Subjects through frosted glas[...]

53 Advanced operations Focusing manually When focusing manually, first focus in telephoto before recording, and then reset the shot length. ( 1 ) Set FOCUS to MANUAL. The f indicator appears in the viewfinder or on the LCD screen. ( 2 ) Move the power zoom lever to the end of the “T” side in the optical zoom zone. ( 3 ) Turn the NEAR/FAR dial t[...]

54 Enjoying pictur e effect Selecting picture effect You can make pictures like those of television with the Picture Effect function. PASTEL [ a ] The contrast of the picture is emphasized, and the picture looks like an animated cartoon. NEG. ART [ b ] The color and brightness of the picture is reversed. SEPIA The picture is sepia. B&W The pict[...]

55 Advanced operations 1 2 PASTEL NEG. ART SEPIA B & W SOLARIZE MOSAIC SLIM STRETCH PICTURE EFFECT Using picture effect function ( 1 ) Press PICTURE EFFECT. ( 2 ) Turn the control dial to select the desired picture effect mode. Enjoying picture effect To turn off picture effect Press PICTURE EFFECT. The indicator in the viewfinder or on the LCD[...]

56 When to adjust the exposure Adjust the exposure manually under the following cases. [ a ] • The background is too bright (back lighting) • Insufficient light: most of the picture is dark [ b ] • Bright subject and dark background • To record the darkness faithfully Adjusting the exposure ( 1 ) Press EXPOSURE. ( 2 ) Turn the control dial [...]

57 Advanced operations Shooting with the sun behind you If the light source is behind your subject, or in the following situations, the subject will be recorded too dark. • The subject is indoors and there is a window behind the subject. • Bright light sources are included in the scene. • When shooting a person wearing white or shiny clothes [...]

58 1, 8 2 TITLE PRESET TITLE HELLO! HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATULATIONS! OUR SWEET BABY WEDDING VACATION THE END [TITLE] : END PRESET TITLE HELLO! HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATULATIONS! OUR SWEET BABY WEDDING VACATION THE END RETURN [TITLE] : END PRESET TITLE HELLO! HAPPY BIRTHDAY HAPPY HOLIDAYS CONGRATULATIONS! OUR SWEET BABY WED[...]

59 Advanced operations Notes on superimposing a title • If you have not given any custom title, “– – – – ...” appears on the display. • The FADER function works while the title is displayed, however, the title does not fade. • If you display the menu or title menu while superimposing a title, the title is not recorded while the me[...]

60 12 TITLE 3 4 6 TITLE SET –––––––––––––––––––– [TITLE] : END 12 TITLE SET –––––––––––––––––––– [TITLE] : END TITLE SET –––––––––––––––––––– [TITLE] : END 34 TITLE SET –––––––––––––––––––– [...]

61 Advanced operations To edit a title you have stored In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit, then change the title. Note You can not enter over 20 characters title. If you take 5 minutes or longer to enter characters while a cassette is in the camcorder The power goes off automatically. Characters you have[...]

62 Re-r ecording a pictur e in the middle of a recor ded tape – CCD-TRV99 only You can insert a scene in the middle of a recorded tape by setting the starting and ending points. The previous recorded portion will be erased. When the RC time code appears, set COUNTER to NORMAL in the menu system to display the tape counter. ( 1 ) While the camcord[...]

63 Advanced operations JUL 4 1998 5:30:00 PM 5:30:00 PM JUL 4 1998 DATE TIME TIME DATE Recor ding with the date/time Before you start recording or during recording, press DATE or TIME. You can record the date or time displayed in the viewfinder or on the LCD screen with the picture. Press DATE (or TIME), then press TIME (or DATE) to display the dat[...]

64 1 4 STBY 0:00:00 ORC MENU L O C K START/STOP S T A N D B Y START/STOP KEY 3 TAPE SET REC MODE ORC TO SET REMAIN COUNTER 2 TAPE SET REC MODE ORC TO SET REMAIN COUNTER RETURN SP TAPE SET REC MODE ORC TO SET REMAIN COUNTER RETURN Optimizing the r ecor ding condition Use this feature to check the tape condition before recording, so that you can get [...]

65 Advanced operations Releasing the STEADY SHOT function When the Steady Shot function is working, the camcorder compensates for camera- shake. You can release the Steady Shot function when you do not need to use it. The indicator appears in the viewfinder or on the LCD screen. Do not use the Steady Shot function when shooting a stationary object [...]

66 If your TV or VCR is a monaural type Connect only the white plug for audio on both the camcorder and the TV or the VCR. With this connection, the sound is monaural even in stereo model. To connect to a TV or VCR without Video/Audio input jacks Use an RFU-95UC RFU adaptor (not supplied). Connect the camcorder to your TV or VCR to watch the playba[...]

67 Advanced operations Watching on a TV screen Using the AV cordless IR receiver Once you connect the AV cordless IR receiver (not supplied) having the LASER LINK mark to your TV or VCR, you can easily view the picture on your TV. For details, refer to the operating instructions of the AV cordless IR receiver. LASER LINK is a system which transmits[...]

68 Enjoying digital ef fect during playback – CCD-TRV99 only During playback, you can process a scene using the digital effect functions; Still, Flash motion, Luminancekey and Trail. For the features of each function, refer to previous pages. You can watch the processed picture on a TV or use it for editing on other video equipment. You cannot re[...]

69 Advanced operations – CCD-TRV99 only You can search for the boundary between recording dates using the Data Code automatically recorded on the tape. There are two modes: • Searching for the beginning of a specific date, and playing back from there (Date Search) • Searching for the beginning of all days, one after another, playing back abou[...]

70 3 REW FF 2 DATE SEARCH DATE SCAN DATE 1 POWER OFF VTR CAMERA To scan the beginning of all days ( 1 ) Set the POWER switch to VTR. ( 2 ) Press DATE on the Remote Commander twice. ( 3 ) Press 0 or ) . Date Scan starts. To stop searching or scanning Press one of the following buttons: DATE , ( , p , 0 or ) . To view pictures during searching or sca[...]

71 Advanced operations Returning to a pre-r egistered position – CCD-TRV99 only Using the Remote Commander, you can easily go back to the desired point on a tape after playback. Use the tape counter. If the RC time code appears, set COUNTER to NORMAL in the menu system to display the tape counter. ( 1 ) During playback, press COUNTER RESET at the[...]

72 – CCD-TRV99 only You can locate the beginning of a desired program easily by marking an index signal during recording or playback and searching for it later. Marking an index signal You can mark an index signal during recording or playback. When marking at the beginning of recording or playback Press INDEX MARK on the Remote Commander in recor[...]

73 Advanced operations INDEX 00 SCAN INDEX 00 SCAN 1 2 INDEX REW FF Scanning the beginning of each marking position – index scan ( 1 ) Press INDEX on the Remote Commander during normal playback. ( 2 ) Press 0 or ) . The tape rewinds or advances rapidly and plays back for approximately 10 seconds from the point on which the index signal was marked[...]

74 12 1 2 [a] [b] 3 INDEX INDEX REW FF INDEX 00 SCAN INDEX 02 SEARCH 1 2 Locating the marking position Locating the desired marking position – index search ( 1 ) Press INDEX on the Remote Commander during stop or playback mode. ( 2 ) Press INDEX repeatedly until the index number of the desired program is displayed in the viewfinder or on the LCD [...]

75 Advanced operations Locating the marking position Erasing an index signal ( 1 ) Locate the index signal to be erased using the index scan or index search function. ( 2 ) Press ERASE on the Remote Commander within 2 to 10 seconds while the desired program plays back. After the index signal is erased, the camcorder returns to index scan when you u[...]

76 – CCD-TRV99 only You can write the RC time code on a recorded tape. Use the Remote Commander. Before you begin, we recommend to set COUNTER to TIME CODE in the menu system so that you can view the RC time code. ( 1 ) While pressing the small green button on the POWER switch, set it to VTR. ( 2 ) Rewind the tape to the beginning and set the cam[...]

77 Advanced operations To write the RC time code from the end of the RC time code recorded portion Rewind the tape to the portion on which the RC time code has been written and set the camcorder to playback pause mode. Then follow steps 3 and 4 above. The RC time code is written continuously. Notes on writing the RC time code • The RC time code w[...]

78 Editing onto another tape You can create your own video program by editing with any other h 8 mm, H Hi8, j VHS, k S-VHS,  VHSC, K S-VHSC, l Betamax or ¬ ED Betamax VCR that has video/audio inputs. Before editing Connect the camcorder to the VCR using the supplied A/V connecting cable. Set the input selector on the VCR to LINE, if available. [...]

79 Advanced operations Recor ding from a VCR or TV You can record a tape from another VCR or a TV program from a TV that has video/ audio outputs. Connect the camcorder to the VCR or TV using the supplied A/V cable. Turn down the volume of the camcorder while editing. Otherwise, picture distortion may occur. ( 1 ) While pressing the small green but[...]

80 Replacing recording on a tape – Insert Editing – CCD-TRV99 only You can insert a new scene from a VCR onto your originally recorded tape by specifying starting and ending points. Connections are the same as in “Recording from a VCR or TV”. ( 1 ) While pressing the small green button on the POWER switch, set it to VTR. ( 2 ) On the VCR, l[...]

81 Additional information Your camcorder is supplied with a lithium battery installed. When the battery becomes weak or dead, the I indicator flashes in the viewfinder for about 5 seconds when you set the POWER switch to CAMERA. In this case, replace the battery with a Sony CR2025 or Duracell DL-2025 lithium battery. Use of any other battery may pr[...]

82 C R 2 0 2 5 2 1 C R 2 0 2 5 1 2 3 1 Changing the lithium battery When replacing the lithium battery, keep the battery pack or other power source attached. Otherwise, you will need to reset the date, time and other items in the menu system retained by the lithium battery. ( 1 ) Open the LCD panel and open the lid of the lithium battery compartmen[...]

83 Additional information To correct the date and time setting Repeat the above procedure. To check the preset date and time Press DATE to display the date indicator. Press TIME to display the time indicator. When you press the same button again, the indicator goes off. The year changes as follows: Note on the time indicator The internal clock of t[...]

84 Simple setting of clock by time dif ference You can easily set the clock for a local time by a time difference in the menu system. ( 1 ) While the camcorder is the standby mode, press MENU to display the menu. ( 2 ) Turn the control dial to select , then press the dial. ( 3 ) Turn the control dial to select WORLD TIME, then press the dial. ( 4 )[...]

85 Additional information Usable cassettes and playback modes Selecting cassette types This Hi8 system is an extension of the standard 8 mm system, and was developed to realize higher picture quality. You can use either Hi8 or standard 8 mm video cassette for this camera. When you use a Hi8 video cassette, the recording is made in the Hi8 system. W[...]

86 This section shows you how you can get the most out of your battery pack. Preparing the battery pack Always carry additional batteries Have sufficient battery pack power to do 2 to 3 times as much recording as you have planned. Battery life is shorter in a cold environment Battery efficiency is decreased, and the battery will be used up more qui[...]

87 Additional information Notes on the rechargeable battery pack Caution Never leave the battery pack in temperatures above 140°F (60°C), such as in a car parked in the sun or under direct sunlight. The battery pack heats up During charging or recording, the battery pack heats up. This is caused by energy that has been generated and a chemical ch[...]

88 Tips for using the battery pack Notes on the “InfoLITHIUM” battery pack What is “InfoLITHIUM” The “InfoLITHIUM” is a lithium ion battery pack which can exchange data with compatible video equipment about its battery consumption. Sony recommends that you use the “InfoLITHIUM” battery pack with video equipment having the mark. When[...]

89 Additional information Maintenance information and precautions Notes on the battery case • Use only with alkaline batteries. You cannot use the battery case with manganese batteries or size AA (LR6) rechargeable NiCd batteries. • Using with Sony alkaline batteries is preferable. • Battery life is remarkably shorter in a cold environment (l[...]

90 Video head cleaning To ensure normal recording and clear pictures, clean the video heads. When the v˚ indicator and “ CLEANING CASSETTE” message appear one after another or playback pictures are “noisy” or hardly visible, the video heads may be dirty. [ a ] Slightly dirty [ b ] Very dirty If this happens, clean the video heads with the [...]

91 Additional information Precautions Camcorder operation • Operate the camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor). • For DC or AC operation, use the accessories recommended in this manual. • Should any solid object or liquid get inside the casing, unplug the camcorder and have it checked by a Sony dealer before operating i[...]

92 Maintenance information and precautions AC power adaptor • Unplug the unit from the wall outlet when not in use for a long time. To disconnect the power cord, pull it out by the plug. Never pull the power cord itself. • Do not operate the unit with a damaged cord or if the unit has been dropped or damaged. • Do not bend the power cord forc[...]

93 Additional information Using your camcorder abr oad Each country or area has its own electric and TV color systems. Before using your camcorder abroad, check the following points. Power sources You can use your camcorder in any country or area with the supplied AC power adaptor within 100 V to 240 V AC, 50/60 Hz. Use a commercially available AC [...]

94 If you run into any problem using the camcorder, use the following table to troubleshoot the problem. Should the difficulty persist, disconnect the power source and contact your Sony dealer or local authorized Sony service facility. Camcorder Power Symptom Cause and/or Corrective Actions • The battery pack is not installed. m Install the batte[...]

95 Additional information Trouble check Symptom Cause and/or Corrective Actions • The START/STOP MODE switch is set to 5SEC or . m Set it to . (p. 16) • The battery is dead. m Use a charged battery pack or the AC power adaptor. (p. 8, 27) • Moisture condensation has occurred. m Remove the cassette and leave the camcorder for at least 1 hour. [...]

96 Symptom Cause and/or Corrective Actions • The contrast between the subject and background is too high. The camcorder is not malfunctioning. m Change locations. • The camcorder is not malfunctioning. • EDIT is set to ON in the menu system. m Set it to OFF. (p. 30) • The video heads may be dirty. m Clean the heads using the Sony V8-25CLH/V[...]

97 Additional information Five-digit display Cause and/or Corrective Actions • Moisture condensation has occurred. m Remove the cassette and leave the camcorder for at least 1 hour. (p. 89) • The video heads are dirty. m Clean the heads using the Sony V8-25CLH/V8-25CLD cleaning cassette (not supplied). (p. 90) • You are using a battery pack t[...]

98 Input and output connectors S video input/output 4-pin mini DIN Luminance signal: 1 Vp-p, 75 ohms, unbalanced Chrominance signal: 0.286 Vp-p, 75 ohms, unbalanced Video input/output Phono jack, 1 Vp-p, 75 ohms, unbalanced Audio input/output Phono jacks (2: stereo L and R) 327 mV, (at output impedance 47 kilohms) impedance less than 2.2 kilohms RF[...]

99 Additional information 7 6 3 1 4 5 0 !¡ !™ 8 9 2 Identifying the parts 1 EDITSEARCH button (p. 21) 2 LASER LINK button (p. 67) 3 Lens cover 4 POWER switch (p. 12) 5 FOCUS switch (p. 53) 6 NEAR/FAR dial (p. 53) 7 Video control buttons (p. 22) p STOP (stop) 0 REW (rewind) ( PLAY (playback) ) FF (fastforward) P PAUSE (pause) r REC (recording) 8 [...]

100 !¶ !ª @º !• !§ !∞ !¢ !£ @¡ @™ @£ @¶ @• @¢ @∞ @§ @ª Identifying the parts !£ Viewfinder (p. 13) !¢ Speaker (p. 23) !∞ LCD screen (p. 17) !§ LCD BRIGHT buttons (p. 17) !¶ OPEN button (p. 16) !• VOLUME buttons (p. 22) !ª Lithium battery compartment (p. 82) @º Hook for shoulder strap @¡ Eyecup @™ Viewfinder lens a[...]

101 Additional information #£ #¶ #¢ #™ #¡ #º $¡ $™ $º $£ $¢ #• #ª #§ #∞ Identifying the parts #º COUNTER RESET button (p. 14) #¡ TIME button (p. 25, 63) #™ DATE button (p. 25, 63) #£ DISPLAY button (p. 23) #¢ TITLE button (p. 58) #∞ END SEARCH button (p. 26) #§ DIGITAL EFFECT button (CCD-TRV99 only) (p. 46) #¶ PICTURE E[...]

102 %• %™ %¡ $§ $• %º $¶ $ª $∞ %¢ %§ %¶ %£ %∞ Identifying the parts $∞ Lighting aperture $§ EJECT switch (p. 11) $¶ LANC l control jack l stands for Local Application Control Bus System. The l control jack is used for controlling the tape transport of video equipment and peripherals connected to it. This jack has the same fun[...]

103 Additional information 8 9 !¡ !º 1 7 6 2 3 4 5 Remote Commander The buttons that have the same name on the Remote Commander as on the camcorder function identically. Identifying the parts 1 Transmitter Point toward the remote sensor to control the camcorder after turning on the camcorder. 2 ZERO MEM button (p. 62, 71) 3 DATA CODE button (p. 2[...]

104 To prepare the Remote Commander Insert two size AA (R6) batteries by matching the + and – on the batteries to the diagram inside the battery compartment. Note on battery life The batteries for the Remote Commander last about 6 months under normal operation. When the batteries become weak or dead, the Remote Commander does not work. To avoid d[...]

105 Additional information Operation indicators Identifying the parts Viewfinder Display window 2 @¢ @∞ @™ !∞ 3 @§ 1 40 min SP H STBY 0:00:00 M.FADER CINEMA SEPIA END SEARCH AUTO DATE 12:00:00 AM c „ f T W 2 4 5 6 7 8 9 0 !¡ !™ !£ 3 1 !¢ !§ !• !ª @º @¡ @™ @£ !¶ !∞ 1 Recording mode indicator (p. 31) / Mirror mode indicator[...]

106 W ar ning indicators If indicators flash in the viewfinder or in the display window, check the following: ≥≥ ... :you can hear the beep sound when the BEEP is set to ON. 123 456 78 9 JUL 4 1998 5min 0min CLEANING CASSETTE C:31:10 C:21:00 0 COPY INHIBIT 1 The battery is weak or dead. Slow flashing: The battery is weak. Fast flashing: The bat[...]

107 Additional information Index A, B Adjusting viewfinder ............. 13 AFM HiFi Sound .............. 34, 85 ANTI GROUND SHOOTING ................................................ 16 Auto focus ................................ 53 Backlight .................................. 35 Beep .......................................... 14 C, D Camera record[...]

Sony Corporation Printed in Japan[...]