Ir a la página of
manuales de instrucciones parecidos
-
Universal Remote
Sony RM-VL900
56 páginas 0.84 mb -
Universal Remote
Sony RM-VL700S
2 páginas 0.07 mb -
Universal Remote
Sony KLV-26S200A
2 páginas 1.08 mb -
Universal Remote
Sony RM-MC60
2 páginas 0.11 mb -
Universal Remote
Sony 418
2 páginas 0.26 mb -
Universal Remote
Sony KLV-32S200A
2 páginas 1.08 mb -
Universal Remote
Sony RM-VL710
44 páginas 0.45 mb -
Universal Remote
Sony US2-697-099-11 (1)
2 páginas 1.08 mb
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Sony RM-AV3000T. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Sony RM-AV3000T o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Sony RM-AV3000T se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Sony RM-AV3000T, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Sony RM-AV3000T debe contener:
- información acerca de las especificaciones técnicas del dispositivo Sony RM-AV3000T
- nombre de fabricante y año de fabricación del dispositivo Sony RM-AV3000T
- condiciones de uso, configuración y mantenimiento del dispositivo Sony RM-AV3000T
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Sony RM-AV3000T no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Sony RM-AV3000T y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Sony en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Sony RM-AV3000T, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Sony RM-AV3000T, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Sony RM-AV3000T. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
3-245-133- 12 (1) Integrated Remote Commander Operating Instructions © 2002 Sony Corporation RM-A V3000T[...]
-
Página 2
2[...]
-
Página 3
3 Featur es The RM-A V3000T Remote Commander provides centralized contr ol of all your A V components from a single remote commander and saves the trouble of operating differ ent A V components with differ ent remote control devices. The following are its main featur es. Customizing 258 labels of control keys in the dot matrix LCD with dot matrix m[...]
-
Página 4
4 T able of Contents Getting Started Location and Function of Controls ....................................................................................... 6 Installing the Batteries ....................................................................................................... .. 7 When to replace the batteries .........................[...]
-
Página 5
5 Selecting a Programme position with a Single K ey Press — Channel Macro Function ...... 58 Setting the Timer .............................................................................................................. .. 61 Setting the new timer programme ................................................................................... 61 C[...]
-
Página 6
6 Location and Function of Contr ols 1 Clock Display key (page 8) Displays the clock, the transmission mark, the battery mark and the timer mark. 2 Mode Display key (page 8, 13, 20, 30, 32, 40) Displays the status of the selected mode. Function of the key changes according to the selected mode. 3 LCD touch key display The keys used for operating ea[...]
-
Página 7
7 qf EXIT button (page 89) Used to exit the setting menu. qg MENU button (page 88) Calls up the menu display of the buttons or keys that have menu function. qh OK button and Cursor Control buttons (page 9, 64, 88) qj SYSTEM CONTROL buttons (page 31) Y ou can programme up to 32 consecutive key operations to each of the three SYSTEM CONTROL buttons. [...]
-
Página 8
8 When to replace the batteries Batteries for remote contr ol operation and backlight (four size AA (R6) batteries) Under normal conditions, alkaline batteries will last up to 5 months. If the Commander does not operate properly , alkaline batteries might be worn out and E is displayed on the LCD touch panel. When the display dims or the backlight [...]
-
Página 9
9 2 Set the day of the week. Select the day of the week by pressing the or button. Selected day of the week flashes. SU : Sunday MO : Monday TU : T uesday WE : W ednesday TH : Thursday FR : Friday SA : Saturday Then press the button. The day of the week is set. “12”, “ AM” and “SET” flash. Note If you press the button, the day of the we[...]
-
Página 10
10 Adjusting the clock after setting the clock 1 While pressing COMMANDER OFF , press % . “SET” appears on the Mode Display key . 2 Press the Mode Display key (SET) twice. MENU EXIT COMMANDER OFF MORE 3 2 1 TV STB VCR DVD CD AMP OTHER TIMER SYSTEM CONTROL OK 2 3 1 PROGRAM 4 Set the minute by pressing the or button. The selected minute flashes. [...]
-
Página 11
11 Each time the SET key is pressed, the Label keys change as follows. “CLOCK” appears and flashes on one of the Label keys on the display . 3 Press the CLOCK key . The Commander enters clock setting mode. “CLOCK” appears on the Mode Display key , and the current time flashes. T o select STD TIME (standard time) or DS TIME (daylight saving [...]
-
Página 12
12 Basic Operations Setting the Code for Pr eset Audio and V isual Components The Commander is preset at the factory to operate Sony brand A V components (see the table below). If you are using the Commander with a factory-set Sony components, skip the following procedur es. Y ou can use the Commander with other preset A V components also. T o use [...]
-
Página 13
13 Example: T o set up a Philips’ TV 1 See the tables in the supplied “ Component Code Numbers, ” and find the four-digit code number for the desired component. If more than one code number is listed, use the number that is listed first. For example, to set up a Philips ’ TV , you would use the code number 8086. The first digit of the compo[...]
-
Página 14
14 5 Press the four -digit component code number followed by the ENT key on the touch-key display . Example: T o enter “ 8086 ” Input “ 8, ” “ 0, ” “ 8, ” “ 6, ” and press “ ENT ” . If you press the CLEAR key during inputting the digits Input digits are cancelled. The four - digit component code number previously set is disp[...]
-
Página 15
15 4 If you have succeeded, check that the Commander is operating the other functions of your component, such as programme position and volume control. See page 18 for details. 5 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Com[...]
-
Página 16
16 Setting the Code for Preset Audio and Visual Components (continued) “ SET ” appears on the Mode Display key . 2 Press the PRESET key . “ PRESET ” appears on the Mode Display key . 3 Select the desired component by pressing the Component Select button or the Label key . T o change the Label keys, press the OTHER button repeatedly . Each t[...]
-
Página 17
17 4 Press PROGRAM + or PROGRAM – to search component code numbers in the same category (in this case, code numbers which begin with “ 8 ” ). Press PROGRAM + to go to the next code number . Press PROGRAM – to go back to the previous code number . Note T o search component code numbers in another category , return to Step 3, or input a four-[...]
-
Página 18
18 Example: T o play a DVD player 1 Press the corr esponding Component Select button or the Label key for the component you have set up. T o display and change the Label keys, press the Mode Display key repeatedly . The Commander comes on and the keys for operating the selected component are displayed. Operating Y our Components with the Remote Com[...]
-
Página 19
19 Using Non-Pr eset Remote Contr ol Oper ations — Learning Function T o operate non-preset components or functions, use the following “ learning ” procedur e to “ teach ” any of the programmable buttons and keys to operate the functions of another remote control. Y ou can also use the learning function to change the signal of individual [...]
-
Página 20
20 Using Non-Preset Remote Contr ol Operations — Learning Function (continued) Remote control for your component RM-A V3000T about 2 – 4 inches (5 – 10 cm) away 3 Press the LEARN key . “ LEARN ” appears on the Mode Display key . 4 Select the desired component of which signals are to be learned by pressing the Component Select button or th[...]
-
Página 21
21 Continued T o change the Label keys, press the Mode Display key (in this case, VCR) repeatedly . Each time you press the VCR key , the display of the Label keys changes as follows. Note on the flashing display The keys or buttons that are alr eady preset for that component flash twice while those that are not preset flash once. T o change the na[...]
-
Página 22
22 Using Non-Preset Remote Contr ol Operations — Learning Function (continued) Notes • If you do not perform learning steps within 2 minutes, learning mode ends. • If you do not perform Step 6 within 10 seconds after Step 5, the display turns back to the display in Step 4. (All the learnable keys flash.) In this case, perform Step 5 again whi[...]
-
Página 23
23 T o change the function display of a key Y ou can select the most suitable function display among all the displays the key has, and set it to the key . 1 After Step 4 (page 20), while pressing the Mode Display key (in this case, VCR), press the key you want to teach repeatedly . Each time the key is pressed, the display is changed in order . 2 W[...]
-
Página 24
24 3 Decide the digit or the character you input by pressing the button or another number key . The cursor moves to the right. When the button is pressed, the cursor moves to the left. Y ou can input a digit or character to the place where the cursor flashes. 4 Repeat Steps 2 and 3 until you input a suitable name to the Label key . When the cursor [...]
-
Página 25
25 Changing or erasing the function of a taught key or button T o change the learned function, clear it first and perform learning again. T o clear the learned function of a single key or button 1 After Step 4 (page 20), while pressing the DEL key , press the key or button you want to erase. The cleared key flashes together with other learnable key[...]
-
Página 26
26 Using Non-Preset Remote Contr ol Operations — Learning Function (continued) T o clear all signals lear ned for a specific component 1 While pressing COMMANDER OFF , press % . “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once “ RESET ” appears and flashes on one of the Label keys on the display . 3 Press [...]
-
Página 27
27 5 Press the Component Select button or the Label key of which preset settings you want to erase. The component name is displayed on the left Label key . 6 Press the YES key . During erasing, “ c c ” stays lit. When erasing finishes, “ OK ” is displayed with a beep sound. If you press the NO key The display returns to Step 4. If you want [...]
-
Página 28
28 3 Press the YES key . “ REALL Y? ” stays lit. “ YES ” and “ NO ” flash. If you press the NO key The display returns to Step 1. 4 Press the YES key . While erasing, “ c c c c ” stays lit. When all settings programmed for the Component Select buttons and corresponding Label keys ar e erased, “ OK ” is displayed with a beep soun[...]
-
Página 29
29 Component Select button TV STB VCR DVD CD AMP Controls the volume of TV TV TV TV amplifier amplifier Advanced Features Controlling the V olume of Visual Components Connected to an Audio System The Commander is factory preset based on the assumption that you hear the sound of your visual components from your TV speakers, and that you hear sound o[...]
-
Página 30
30 Controlling the V olume of Visual Components Connected to an Audio System (continued) 1 While pressing COMMANDER OFF , press % . “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) twice. Each time the SET key is pressed, the Label keys changes as in Step 2 on page 1 1. “ MODE ” appears and flashes on one of the [...]
-
Página 31
31 6 Hold COMMANDER OFF pressed for mor e than 2 seconds to turn the Commander off. If you keep COMMANDER OFF pressed for less than 2 seconds, the display returns to the pr evious setting mode. Notes • If you have already pr ogrammed any signal for the 2 or % button of each component by “ learning, ” the procedure above will not change the fu[...]
-
Página 32
32 COMMANDER OFF 2 Press the SYSTEM key . “ SYSTEM ” appears on the Mode Display key . 3 Select the system number by pressing the SYSTEM CONTROL button (in this case, SYSTEM CONTROL 2) or the Label key . T o change label keys, press the MORE button repeatedly until you obtain the desired system number . Each time you press the MORE button, the [...]
-
Página 33
33 TV T o program a new series of operations for the buttons which have already been set SYSTEM CONTROL 1 or 3 button: Erase the factory preset pr ogram. See page 37. Other buttons: Erase the program. See page 35. 4 Select the component to operate by pressing the Component Select button (in this case, TV) or the Label key . T o change label keys, p[...]
-
Página 34
34 Executing a Series of Commands — System Control Functions (continued) Notes • If you interrupt the procedur e at any point for over 2 minutes, the setting mode ends and the series of commands will be programmed to that point. In this case, clear the programme (page 35) and start again from Step 1 to set the entir e programme from the beginni[...]
-
Página 35
35 Continued T o clear programmed commands for a specific SYSTEM CONTROL button or corresponding Label key 1 While pressing COMMANDER OFF , press % . “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once to display “ RESET ” on one of the Label keys on the display . 3 Press the RESET key . “ RESET ” appears o[...]
-
Página 36
36 Executing a Series of Commands — System Control Functions (continued) YES T o erase all programmed commands for all SYSTEM CONTROL buttons and corresponding Label keys 1 Follow Steps 1 - 3 in the left. 2 While pressing the DEL key , press the SYSTEM key . 3 Press the YES key . “ REALL Y? ” stays lit, and “ YES ” and “ NO ” flash. I[...]
-
Página 37
37 Continued COMMANDER OFF If you press the NO key The display returns to Step 1. 5 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous setting mode. T o erase the SYSTEM CONTROL 1 or 3 button At the [...]
-
Página 38
38 Executing a Series of Commands — System Control Functions (continued) Progr amming a series of commands for the Component Select buttons or the Label keys As with the SYSTEM CONTROL buttons or the Label keys, you can also programme a series of operating commands for the Component Select buttons (up to 32 steps). T o execute the commands pr ogr[...]
-
Página 39
39 T o clear a System Control function programmed for Component Select buttons and Label keys 1 Follow Steps 1-4 on page 26. 2 While pressing the DEL key , press the Component Select button (or Label key) of the System Control function you want to clear . T o change the Label keys, press the OTHER button repeatedly . 3 Press COMMANDER OFF . If you [...]
-
Página 40
40 3 Press the MODE key . “ MODE ” appears on the Mode Display key . 4 Press the SYSDELA Y key . “ SYSDELA Y ” is displayed on the Mode Display key . 5 Select the system number , the component name or the timer programme number of the interval you want to change by pressing the SYSTEM CONTROL button, the Component Select button or the Label[...]
-
Página 41
41 8 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous setting mode. T o display and change the Label keys for timer programme numbers Press the TIMER button r epeatedly . For timer settings, see pa[...]
-
Página 42
42 T o change the component macro e xecuting time 1 Follow the procedur e of Steps 1 - 5 on page 40. 2 Press the TIME key . The current component macr o executing time stays lit, and (+) and ( – ) flash. 3 Press the (+) or ( – ) key to change the component macro executing time. Y ou can control the time from 0 to 2 sec (seconds) in units of 1 s[...]
-
Página 43
43 Example: T o programme the TV button 1 While pressing COMMANDER OFF , press % . “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) twice to display “ MODE ” on one of the Label keys on the display . 3 Press the MODE key . “ MODE ” appears on the Mode Display key . Adding an Extr a Function to the Component S[...]
-
Página 44
44 Adding an Extra Function to the Component Select Buttons (continued) 4 Press the PowerON key . “ PowerON ” appears on the Mode Display key . The display of the component names (preset by Sony) for which you can programme the Power -on signal flashes. The display of the other components stays lit. 5 Select the desired component by pressing th[...]
-
Página 45
45 Adding a command that is requir ed when selecting a component In addition to the original function of selecting the operating keys and buttons of the desired component, the Component Select button or the Label key can have another remote contr ol signal by “ learning. ” For example, if you always have to change input select of the amplifier [...]
-
Página 46
46 3 While pressing the Mode Display key (LEARN), press the Component Select button or the Label key you want to “ teach, ” and release both keys. (T o change the Label keys, press the OTHER button repeatedly .) The selected component name appears on the Mode Display key , and “ LEARN ” begins to flash. 4 Press and hold down the button on t[...]
-
Página 47
47 Assigning Other Components to the Component Select Buttons or the Label K eys Copying the settings of a Component Select button or a Label key to another button or key Y ou can copy the entire settings of a Component Select button or a Label key to another Component Select button or a Label key . The settings of the component code (page 12), the[...]
-
Página 48
48 Assigning Other Components to the Component Select Buttons or the Label Keys (continued) Example: T o copy the settings of the DVD button to the VCR button 1 While pressing COMMANDER OFF , press % . “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once to display “ COPY ” on one of the Label keys on the displa[...]
-
Página 49
49 “ COPY ” appears on the Mode Display key . In this case, “ DVD c c VCR ” flashes on the Label keys and moving finishes with a beep sound. And the keys for VCR appears. 6 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The C[...]
-
Página 50
50 Programming a Fr equently Used Key Operation for SYSTEM CONTROL Buttons or Label Keys (continued) LEARN 3 Press the LEARN key . “ LEARN ” appears on the Mode Display key . If a signal has been learned on that button, the display stays lit. If you want to programme on that button, clear the signal first (page 51). 4 Press the SYSTEM CONTROL b[...]
-
Página 51
51 COMMANDER OFF T o clear the learned remote control signal 1 While pressing COMMANDER OFF , press % . 2 Press the LEARN key . “ LEARN ” appears on the Mode Display key . 3 While pressing the DEL key , press the SYSTEM CONTROL button or the Label key of which learned signals are to be cleared. The learned signals are clear ed. 4 Press COMMANDE[...]
-
Página 52
52 Notes on learning the signals of an air -conditioner About seasonal adjustments If you change the settings of the air- conditioner for the season, you have to programme the r emote control signals of the new settings on the Commander . If the power -on/off operation does not work correctly The air-conditioner may not be turned on or off pr operl[...]
-
Página 53
53 4 Press the MODE key . “ MODE ” appears on the Mode Display key . 5 Press the “ TRANSFER ” key . “ TRANSFER ” appears on the Mode Display key . 6 Press the X key . X : T ransfer data x : Receive data 1 Place the RM-A V3000T head to head with another RM-A V3000T . 2 While pressing COMMANDER OFF , press % . “ SET ” appears on the M[...]
-
Página 54
54 COMPO 7 Press the ALL key . ALL: All data of the Commander COMPO: Data of a Component Select button or a Label key “ ALL X ” appears on the Mode Display key , and “ ALL ” appears on the left Label key . 8 Confirm that the receiving Commander is ready for data. (T o set the receiving commander , follow the procedur e on page 56.) 9 Press [...]
-
Página 55
55 5 Press the “ ENTER ” key . During transferring the data, “ c c c c ” flashes. When the data has been successfully transferred, “ END ” appears on the right Label key . Note If “ NG ” appears while sending the data, go back to Step 6 and continue the operation or press COMMANDER OFF to stop the operation. 6 Press COMMANDER OFF . [...]
-
Página 56
56 ALL T ransferring Data between Commanders (continued) “ ALL x ” appears on the Mode Display key , and “ ALL ” appears on the left Label key . 4 Press the ENTER key . During receiving the data, “ cccc cccc ” flashes. When all the data has been successfully transferred, “ ALL ” appears on the right Label key . Notes • If the Comm[...]
-
Página 57
57 COMMANDER OFF Continued 5 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than 2 seconds The Commander turns off. If you keep COMMANDER OFF pressed for less than 2 seconds The Commander returns to the previous setting mode. COMPO T o receive the data of a Component Select button or key from another r emote commander 1 Perform S[...]
-
Página 58
58 Selecting a Pr ogramme with a Single K ey Press — Channel Macro Function Y ou can programme the Channel Macr o function of the components of which the first digit of the four-digit pr eset component code number is 3 (STB), 8 (TV) or 9 (CABLE). And you can programme the Channel Macro function for the macr o keys (Label keys) when the selected c[...]
-
Página 59
59 COMMANDER OFF CHMACRO TV Continued Example: T o programme TV programme 123 for the BLUE key 1 While pressing COMMANDER OFF , press % . “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once to display “ CHMACRO ” on one of the Label keys. 3 Press the CHMACRO key . “ CHMACRO ” appears on the Mode Display key[...]
-
Página 60
60 Note Y ou cannot programme the Channel Macro function for a macro key that has “ learned ” a signal. T ry again with another macro key , or clear the “ learned ” signal (page 25) from the button and programme the Channel Macr o function on it. T o clear the Channel Macro function 1 While pressing COMMANDER OFF , press % . 2 Press the SET[...]
-
Página 61
61 Setting the Timer Up to 12 timer setting programmes can be set on this commander . Y ou can programme the timer setting of the day of the week, the hour , the minute and the contents of the programme (T imer Macro). Y ou can set each programme of the timer to be executed or not. There ar e two ways for the timer setting as below . - Setting the [...]
-
Página 62
62 Setting the Timer (continued) The selected programme number appears on the Mode Display key . (If the pressed Label key has character contents you input, the character contents appear on the Mode Display key .) “ ON/OFF , ” “ TEST , ” “ SETUP , ” and “ COPY ” flash on the Label keys. “ SU ” and “ 12:00 AM ” are displayed [...]
-
Página 63
63 6 Press the TIME key . Set the timer-on hour by pr essing the or button. Then press the button so that the minute flashes. (Y ou can switch the mode between the hour setting and the minute setting by pressing the or button.) Set the minute by pressing the or button. Then press the ENTER key . The time of the timer setting is decided. The display[...]
-
Página 64
64 Setting the Timer (continued) COMMANDER OFF 11 When you have programmed a series of T imer Macro setting, press COMMANDER OFF . W ith a beep sound, a series of T imer Macro setting is r egistered and displayed in order . When you have programmed the buttons on the Commander The names of buttons on the Commander which are not on the LCD touch key[...]
-
Página 65
65 T o change the programme name on the Mode Display key After Step 3, hold the Mode Display key pressed for mor e than 2 seconds. The Commander enter the Label Inputting mode. Then follow the same procedur e as that for changing the name of the Label key in Steps 2 - 5 on page 24. T o change the interval between timer operation steps See page 40. [...]
-
Página 66
66 Setting the Timer (continued) 6 Press the key of which contents you want to change. DA Y : See Step 5 on page 62. TIME: See Step 6 on page 63. MACRO: The display turns as below . 7 Press the YES key . W ith a beep sound, the T imer Macro setting is cleared, and the Commander enters the T imer Macro setting mode (Step 7 on page 63). If you press [...]
-
Página 67
67 T o check the execution of the timer programme or set the timer programme to the standby mode 1 Follow Steps 1 - 3 on page 61, 62. 2 Press the TEST key or the ON/ OFF key . TEST : Y ou can check the timer programme setting by transmitting the T imer Macro signals. ON/OFF: The display turns as below . W ith a beep sound, “ ON ” appears, and t[...]
-
Página 68
68 4 Keep COMMANDER OFF pressed for mor e than 2 seconds to turn the Commander off. T o reset the standby mode to off, follow Steps 1 - 3 again. Notes • If the TEST key or the ON/OFF key is pressed when the timer pr ogramme is not set, the “ NG ” sound is heard twice and “ NG ” flashes. • When you finish the timer setting mode after you[...]
-
Página 69
69 T o clear timer settings programmed for a specific PROG (1-12) Label key 1 While pressing COMMANDER OFF , press % . 2 Press the Mode Display key (SET) once to display “ RESET ” on one of the Label keys on the display . 3 Press the RESET key . “ RESET ” appears on the Mode Display key . 4 Press the TIMER button. Continued “ PROG1 ” - [...]
-
Página 70
70 COMMANDER OFF T o clear all timer settings programmed for all PROG (1 - 12) Label keys 1 Proceed Steps 1 - 3 on page 69. 2 While pressing the DEL key , press the TIMER key . 3 Press the YES key . “ REALL Y? ” stays lit, and “ YES ” and “ NO ” flash. If you press the NO key The display returns to Step 1. 4 Press the YES key . If you p[...]
-
Página 71
71 1 While pressing the Clock Display key , press COMMANDER OFF . W ith a beep sound, “ LOCK ” appears on the Mode Display key , and every LCD display disappears except the clock and “ LOCK. ” After a second, every LCD display disappears. Using Other Functions Locking the Contr ols — Hold Function T o prevent accidental operation, you can[...]
-
Página 72
72 2 While pressing the LOCK key , press the Label key on which the setting mode you want to lock is displayed. (T o change the Label keys, press the SET key .) The selected setting mode is locked and the display of the locked setting mode on the Label key stays lit. T o lock other setting modes, repeat Step 2. 3 Press COMMANDER OFF . When the sett[...]
-
Página 73
73 Setting the Automatic- Off Time of the Display Window The Commander is preset at the factory to turn off the LCD display window automatically if you do not operate for more than 10 minutes. (Then all the display contents are turned of f.) T o change this setting, perform the following procedur e. Y ou can adjust the Automatic-Off time of the LCD[...]
-
Página 74
74 Setting the Automatic-Off Time of the Display Window (continued) COMMANDER OFF Adjusting the Backlight of the Display Window The Commander is preset at the factory to brighten backlight, and to switch off the backlight automatically if you do not operate for more than 10 seconds. T o change this setting, perform the following procedur e. Y ou ca[...]
-
Página 75
75 2 Press the Mode Display key (SET) twice to display “ LIGHT ” on one of the Label keys. 3 Press the LIGHT key . “ LIGHT ” appears on the Mode Display key . 4 Press the OFF TIME key . The display becomes in the setting mode of the Automatic-Off time of the backlight. 5 Press the (+) or ( – ) key to change the Automatic-Off time of the b[...]
-
Página 76
76 Adjusting the Backlight of the Display Window (continued) COMMANDER OFF 7 Press the BRIGHT or DIM key to select the brightness. Then press COMMANDER OFF to decide the brightness. The display returns to Step 3. BRIGHT : bright DIM: dark 8 Press the ON MODE key . The commander enter the setting mode to select the buttons to lighten the display win[...]
-
Página 77
77 Setting the K ey-T ouch Beep The Commander is preset at the factory to turn on the key-touch confirmation beep. Y ou can turn on or off the key- touch confirmation beep. 1 While pressing COMMANDER OFF , press % . “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) twice to display “ MODE ” on one of the Label key[...]
-
Página 78
78 4 Press the Mode Display key (MODE) once to display “ CONTRAST ” on one of the Label keys. 5 Press the CONTRAST key . “ CONTRAST ” appears on the Mode Display key . “ **** ” appears on each Label key . The DVD display appears on the other part of the display window . 6 Press the PROGRAM + or PROGRAM – button to adjust the contrast [...]
-
Página 79
79 Changing the Names of the Label K eys or the Component Names on the Mode Display K ey Y ou can change the display of the Component names on the Mode Display key or on the Label keys, the function displays of components, the SYSTEM4 - SYSTEM15 and PROG1 - PROG12 on the Label keys to the most suitable name using up to 8 characters or digits. COMMA[...]
-
Página 80
80 Changing the Names of the Label Keys or the Component Names on the Mode Display Key (continued) 4 Select the sort of Labels by pressing the COMPO, SYSTEM or TIMER key . COMPO: Displays component names. T o change the Label keys, press the OTHER button. Press the component select button or the Label key of which the name you want to change. T o c[...]
-
Página 81
81 COMMANDER OFF Erasing All the Settings Y ou can erase all the settings to reset the Commander to its factory settings. 1 While pressing COMMANDER OFF , press % . “ SET ” appears on the Mode Display key . 2 Press the Mode Display key (SET) once to display “ RESET ” on one of the Label keys on the display . MENU EXIT COMMANDER OFF MORE 3 2[...]
-
Página 82
82 6 Press the YES key . During erasing, “ ALL c c c c c c c c ” stays lit. When all the settings on the Commander are erased, “ OK ” is displayed with a beep sound. The Commander is reset to its factory settings. If you press the NO key The display returns to Step 3. 7 Press COMMANDER OFF . If you keep COMMANDER OFF pressed for mor e than [...]
-
Página 83
83 Specifications Operating distance Approx. 32.8 ft. (10 metr es) (varies depending on components of differ ent manufacturers) Power requir ements Remote control and backlight: Four size AA (R6) batteries Battery life Approx. 5 months (varies depending on frequency of use) Dimensions Approx. 4 3 / 4 × 7 × 1 1 / 2 in. (w × h × d) (120 × 175 ×[...]
-
Página 84
84 T roubleshooting If you have problems setting up or using the Remote Commander , first check the batteries (page 7), then check the items below . Remedy • Go closer to the component. The maximum operating distance is approximately 32.8 ft. (10 m). • Check that you are aiming the Commander directly at the component, and that there are no obst[...]
-
Página 85
85 Symptom “ NG ” flashes five times. “ NG ” flashes twice. Remedy • Leaning has not succeeded. After checking the follows, try learning procedure again (page 19). - Change the distance between remote commanders. - See “ For accurate learning ” (page 25). • The component codes cannot be set. See the supplied “ Component Code Numbe[...]
-
Página 86
86 T roubleshooting (continued) Symptom “ NG ” appears during learning. “ NG ” flashes if you try to copy the settings of the Component Select button or the Label key to another Component Select button or Label key. A system control programme does not function correctly. Your Commander does not work as expected after data transfer. The comp[...]
-
Página 87
87 Customer Service If you have any questions or problems concerning the Remote Commander that are not cover ed in this manual, please call the customer remote helpline. The number is mentioned in the warranty card. Symptom The display of the Commander turns off by itself. E is displayed only when transferring the data and lighting the LCD display [...]
-
Página 88
88 KEY DISPLAY POWER 1 1 – 9, 0, 1-,-/--, 2- INPUT DISPLAY SLEEP MAIN/SUB TELETEXT TV ON WIDE EPG SHIFT MENU OK PIP ON/OFF TV FUNCTION To turn on and off To change the programme Also to turn on To select double-digit numbers Works in same way as the TV ’ s commander To select a number between 20 and 29 To change the input mode To display the cu[...]
-
Página 89
89 KEY DISPLAY POWER 1 1-9,0, 1-,-/-- INPUT GUIDE INFO TELETEXT FAVORITE A B C D E MENU OK PROGRAM +/ – STB (Digital satellite, Analogue satellite, Digital terrestrial) FUNCTION To turn on and off To change the programme Also to turn on To select double-digit numbers Works in same way as the TV ’ s commander. To switch the output of the SAT rec[...]
-
Página 90
90 T able of Preset Functions (continued) KEY DISPLAY POWER 1 1 – 9, 0, 1-,-/--, 2- INPUT DISPLAY ANT/SW MENU OK m N M REC x X Z PROGRAM +/ – COUNTER Q.TIMER T SEARCH SEARCH t COMMERCL VCR, VCR2, VCR3 FUNCTION To turn the power on/off To change the programme Also to turn on To select double-digit numbers Works in same way as the TV ’ s comman[...]
-
Página 91
91 KEY DISPLAY POWER 1 1 – 9, 0 +10 ENTER AUDIO DISPLAY ANGLE CLEAR RETURN TITLE SUB TITLE MENU OK m N M x X > (PROGRAM +) . (PROGRAM – ) Z TIME SET UP DVD , DVD2, DVD3 FUNCTION To turn to the power on/off Number buttons: To set items selected from the screen To select numbers 10 and above To enter a setting or to set items selected from the[...]
-
Página 92
92 T able of Preset Functions (continued) KEY DISPLAY POWER 1 1 – 9, 0 +10 ENTER D.SKIP DISPLAY CLEAR m N M x X Z > (PROGRAM+) . (PROGRAM – ) CONTINUE SHUFFLE PROGRAM REPEAT CD FUNCTION To turn the power on/off To select the track number (0 selects track 10) To select track numbers above 10, see the descriptions on the +10 button below. To s[...]
-
Página 93
93 KEY DISPLAY SHIFT BAND EXIT PROGRAM +/ – 2 +/ – % S.FIELD GENRE MODE T.TONE CENTER+ CENTER – REAR+ REAR – SUB WOOFER+ SUB WOOFER – T D.INPUT D.INPUT t FUNCTION To shift band or preset select To select FM/AM To return to the basic MENU Presetting or tuning frequency to a higher: + Presetting or tuning frequency to a lower: – Volume up[...]
-
Página 94
94 T able of Preset Functions (continued) KEY DISPLAY POWER 1 1 – 9, 0 +10 ENTER D.SKIP DISPLAY CLEAR m N M REC x X Z > (PROGRAM+) . (PROGRAM – ) MD FUNCTION To turn the power on/off To select the track number (0 selects track 10) To select track numbers above 10, see the descriptions on the +10 button below. To select numbers 10 and above T[...]
-
Página 95
95 KEY DISPLAY POWER 1 1 – 9, 0 +10 ENTER m n N M REC x X DISPLAY A/B REW AMS FF AMS FADER REC MUTE DOLBY NR REC LEVEL+ REC LEVEL – C.RESET C.MEMORY PROGRAM T APE A, T APE B FUNCTION To turn the power on/off To select the track number To select numbers 10 and above To enter the setting To rewind To reverse To play To fast-forward To enter the r[...]
-
Página 96
96 KEY DISPLAY POWER 1 1 – 9, 0 DISPLAY m N M REC x X Z > (PROGRAM+) . (PROGRAM – ) HIGH REV HIGH CUE FADER REC MUTE DA T FUNCTION To turn the power on/off To select the track number (0 selects track 10) To select track numbers above 10, see the descriptions on the +10 button below. To change the display mode or turn the display on/off To re[...]
-
Página 97
97 Quick Reference of Oper ations To Enter the setting mode Enter the learning mode Enter the setting mode of the System Control function Enter the timer programme setting mode Input the character contents to each Label key for the component Input the character contents to each Label key for the System Control Input the character contents to each L[...]
-
Página 98
98 To Set the interval between operation steps of the System Control Set the component macro executing time Adjust the contrast of the LCD display window Turn the key-touch beep on/off Set the Automatic-Off time of the LCD display window Set the Automatic-Off time Set the brightness of the backlight Select the buttons to light the LCD display windo[...]
-
Página 99
99 Full Display[...]
-
Página 100
100 Index A Automatic-Off of the backlight 74 of the display window 73 B Backlight adjusting 74 Automatic-Off 74 Batteries 7 C, D Changing component name on the Mode display key 24 function display of keys 23 interval of the System Control function 40 name of the Label key 23 PROGRAM button 6 Channel Macro function 58 Clearing/Changing Channel Macr[...]