Sony SLV-M11HF manual

3-865-760- 11 (1) Video Cassette Recor der ©1999 by Sony Corporation SL V -M11HF Operating Instructions Owner’ s r ecord The model and serial numbers are located at the r ear of the unit. Recor d these numbers in the spaces provided below . Refer to them whenever you call upon your Sony dealer regar ding this product. Model No. _________________[...]

2 Introduction WARNING T o prevent fir e or shock hazard, do not expose the unit to rain or moisture. This symbol is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosur e that may be of sufficient magnitude to constitute a risk of electric shock to persons. This symbol is intended to ale[...]

3 Introduction * VCR Plus+, C 3 , A LL S ET and PlusCode ar e trademarks of Gemstar Development Corporation. The VCR Plus+ system is manufactured under license from Gemstar Development Corporation. T able of contents Basic Operations 4 Playing a tape 7 Recording TV pr ograms 11 Locating a channel by Station ID 13 Recording TV pr ograms using the VC[...]

Basic Operations 4 Basic Operations Playing a tape 1 T urn on your TV and set it to the video channel. 2 Insert a tape. The VCR turns on and starts playing automatically if you insert a tape with its safety tab removed. Z EJECT X P AUSE H PLA Y x STOP M FF m REW SMART CUE CLEAR DISPLA Y 123 456 789 0[...]

5 Basic Operations Basic Operations OK PLAY 3 Press H PLA Y . When the tape reaches the end, it will r ewind automatically . Additional tasks T o Press Stop play x STOP Pause play X P AUSE Resume play after pause X P AUSE or H PLA Y Fast-forward the tape M FF during stop Rewind the tape m REW during stop Eject the tape Z EJECT T o skip playback Y o[...]

Basic Operations 6 T o use the time counter At the point on the tape that you want to find later , press CLEAR. The counter in the display window resets to “0:00:00”. Sear ch for the point afterwards by r eferring to the counter . T o display the counter on the TV screen, press DISPLA Y . Notes • T apes recorded in the LP mode on other VCRs c[...]

7 Basic Operations Basic Operations 1 T urn on your TV and set it to the video channel. T o record fr om a cable box, turn it on. 2 Insert a tape with its safety tab in place. Recor ding TV pr ograms SP/EP INPUT SELECT CH +/– z REC TV/VIDEO COUNTER/ REMAIN x STOP DISPLA Y Number buttons, ENTER 123 456 789 0 continued[...]

Basic Operations 8 Recording TV pr ograms (continued) Recording indicator 3 Press INPUT SELECT until a channel number appears in the display window . 4 Press CH +/– to select the channel you want to r ecord. 5 Press SP/EP to select the tape speed, SP or EP . EP (Extended Play) pr ovides recording time three times as long as SP (Standar d Play), h[...]

9 Basic Operations Basic Operations Time counter Remaining tape length Safety tab T o check the remaining tape length Press DISPLA Y . The white bar indicates the approximate length of tape remaining. W ith the display on, press COUNTER/REMAIN to check the remaining time. Each time you pr ess COUNTER/REMAIN, the time counter and the remaining tape [...]

Basic Operations 10 Tips • T o select a channel, you can use the number buttons on the remote commander . Enter the channel number , then press ENTER. • Y ou can select a video source from the LINE-1 IN or LINE-2 IN jacks using the INPUT SELECT button. • The display appears on the TV screen indicating information about the tape, but the infor[...]

11 Basic Operations Basic Operations Locating a channel by Station ID Y ou can select the TV program fr om station ID. Before you start... • Set F A VORITE CH to OFF in the ADV ANCED OPTIONS menu (page␣35). CH +/– ENTER 1 T urn on your TV and set it to the video channel. T o record fr om a cable box, turn it on. 123 456 789 0 continued[...]

Basic Operations 12 The selected station ID 2 Press ENTER. The station ID appears on the TV screen. 3 Press CH +/– to select the station ID you want. 4 Press ENTER. Note • If the TV channel has no station ID, the channel number appears on the TV screen. IJK OPQ CDE LMN RST AAB ABB XYZ UVW FGH 12 15 9 13 19 3 45 43 22 10 Locating a channel by St[...]

13 Basic Operations Basic Operations 1 Press VCR Plus+. Recor ding TV pr ograms using the VCR Plus+ GOLD system Just enter the PlusCode number listed in the TV program guide. The date, time and channel number of that program ar e set automatically . Y ou can preset up to eight programs at a time. Before you start… • Check that the VCR clock is [...]

Basic Operations 14 Recording TV pr ograms using the VCR Plus+ GOLD system (continued) WEEK L Y ONCE DA I L Y P l u s C ode U se keys f o r : To co n f i rm: T o cance l : CLEAR ENTER SP / EP EP ––– 292 53 VCR Plus+ WEEK L Y ONCE DA I L Y P l u s C ode U se keys f o r : To c on f i rm: T o cance l : CLEAR ENTER SP / EP SP ––– 292 53 VCR[...]

15 Basic Operations Basic Operations T o use the VCR after setting the timer T o use the VCR before a timer r ecording begins, just press `/1 . The indicator disappears from the display window and the VCR switches on. Remember to press `/1 to r eset the VCR to the timer recording standby mode after using the VCR. Y ou can also do the following task[...]

Basic Operations 16 Setting the timer manually If the VCR Plus+ GOLD system is not available in your area, follow the instructions below to set the timer to recor d programs. Before you start… • Check that the VCR clock is set to the correct time. • T urn on your TV and set it to the video channel. When using a cable box, turn it on. • Inse[...]

17 Basic Operations Basic Operations Channel number Station ID 2 Press M / m to select the line that is to be set. 3 Set the date, start and stop time, channel number and tape speed: 1 Press , to highlight each item in turn. 2 Press M / m to set each item. T o correct a setting, press < to r eturn to that setting and reset. When you set the chan[...]

Basic Operations 18 Setting the timer manually (continued) T o stop recor ding T o stop the VCR while recording, pr ess x STOP . Daily/weekly recor ding In step 3 above, press m to select the r ecording pattern. Each time you press m , the indication changes as shown below . Press M to change the indication in reverse or der . the current date t SU[...]

19 Basic Operations Basic Operations Tips • T o set the channel, you can also use the CH +/– or number buttons. • T o set the tape speed, you can also use the SP/EP button. • When you are recor ding a program in the SP mode and the r emaining tape becomes shorter than the recor ding time, the tape speed is automatically changed to the EP mo[...]

Additional Operations 20 Playing/sear ching at various speeds Additional Operations m REW M FF Playback options Operation V iew the picture during fast-forward or r ewind Play at high speed Play at twice the normal speed Play in slow motion During fast-forward, hold down M FF/ M FF . During rewind, hold down m REW/ m REW . • During playback, pres[...]

21 Additional Operations Mark on the TV screen Slow motion Pause Slow motion in reverse Playback mode Normal speed Double speed High speed High speed Double speed Normal speed in reverse in reverse in reverse X2 X2 –X 1 – Playback options Operation Play frame by frame Rewind and start play T o resume normal playback Press H PLA Y . Using the sh[...]

Additional Operations 22 T o use the shuttle ring in jog mode Use this mode for frame-by-frame playback. Press JOG to enter the jog mode. The JOG button lights up. If you change to the jog mode during any playback mode, the playback pauses so you can see a still picture. Each change in the shuttle ring position shifts the pictur e one frame. T o sh[...]

23 Additional Operations Cr eating a favorite channel list with Station ID Y ou can create your favorite channel list of the TV channels with station ID. Y ou can store up to 10 channels with station ID and select the channel from your favorite channel list. Before you start... • Set F A VORITE CH to ON in the ADV ANCED OPTIONS menu (page␣35). [...]

Additional Operations 24 Creating a favorite channel list with Station ID (continued) 3 Press < / , to select the station ID you want to set. 4 Repeat steps 2 and 3 to set the station IDs as required. 5 Press ENTER. Note • If the TV channel has no station ID, the channel number appears on the TV screen. IJK OPQ BBA LMN RST AAB ABB XYZ UVW FGH [...]

25 Additional Operations 1 T urn on your TV and set it to the video channel. T o choose a channel from a cable box, turn the cable box on. 2 Press ENTER. Y our F A VORITE CH screen appears on the TV screen. 3 Press CH +/– to select the station ID you want. 4 Press ENTER. Note • If the TV channel has no station ID, the channel number appears on [...]

Additional Operations 26 z REC Setting the r ecording duration time After starting recor ding in the normal way , you can have the VCR stop recor ding automatically after a specified duration. Normal recording 0:30 1:00 5:30 6:00 STEREO SAP LP SP EP VIDEO APC EDIT VTR 123 AV INSERT BLANK 1 While recor ding, press z REC. The indicator appears in the[...]

27 Additional Operations Checking/ changing/ canceling timer settings Before you start… • T urn on your TV and set it to the video channel. 1 Press `/1 to turn on the VCR. 2 Press MENU, then pr ess M / m to select TIMER SET/CHECK and press OK. • If you want to change a setting, go on to the next step. • If you do not need to change the sett[...]

Additional Operations 28 Program 1 Will be cut off Program 2 Program 1 About 20 seconds Program 2 About 20 seconds will be cut off 3 Press M / m to select the setting you want to change or cancel: • T o change the setting, press < / , to highlight the item you want to change, and press M / m to r eset it. Then, press , repeatedly until the cur[...]

29 Additional Operations Recor ding stereo and bilingual pr ograms Recording ster eo programs This VCR automatically receives and recor ds stereo programs. When a stereo pr ogram is received, the STEREO indicator lights up. If there is noise in the stereo pr ogram, set AUTO STEREO in the ADV ANCED OPTIONS menu to OFF . The sound will be recor ded i[...]

Additional Operations 30 Notes • T o play a tape in stereo, you must use the A/V connections. • When you play a tape recor ded in monaural, the sound is heard in monaural regardless of the AUDIO MONITOR setting. • If the AUDIO MONITOR button does not function, check that AUDIO MIX in the ADV ANCED OPTIONS menu is set to OFF . How sound is rec[...]

31 Additional Operations Sear ching using the index function The VCR marks the tape with an index signal at the point where each r ecording begins. Use these signals as references to find a specific recor ding. The VCR can search up to 99 index signals ahead of or behind the current position. 1 Insert an indexed tape into the VCR. 2 Press . / > [...]

Additional Operations 32 Adjusting the pictur e Adjusting the tracking Although the VCR automatically adjusts the tracking when playing a tape (the indicator flashes in the display window , then goes off), distortion may occur if the tape was recor ded in poor condition. In this case, manually adjust the tracking. Press the TRACKING +/– buttons t[...]

33 Additional Operations About the Adaptive Picture Contr ol (APC) function The Adaptive Picture Control (APC) function automatically improves recor ding and playback quality by adjusting the VCR to the condition of the video heads and tape. T o maintain better picture quality , we recommend that you set APC to ON in the ADV ANCED OPTIONS menu (wit[...]

Additional Operations 34 Changing menu options 1 Press MENU, then pr ess M / m to select ADV ANCED OPTIONS and press OK. 2 Press M / m to select the option to change, then press < / , to change the setting. The ADV ANCED OPTIONS menu has 3 pages. Pressing M / m r epeatedly will turn the pages. 3 Press OK to r eturn to the original screen. Menu c[...]

35 Additional Operations Menu option Set this option to TUNER AUDIO • MAIN to r ecord the main sound on both hi-fi and normal audio tracks. • SAP to recor d the SAP (Second Audio Program) sound on both hi-fi and normal audio tracks. SHARPNESS L (Low) thr ough H (High) to adjust the sharpness of the picture. L to turn off the sharpness control. [...]

Additional Operations 36 Menu option Set this option to BLANK SEARCH • MANUAL to display a screen asking whether to search for the Blank T ime when the timer is set. • AUT O to set the VCR to perform the Blank Time sear ch automatically each time the timer is set. • OFF to switch of f the Blank T ime search function. For details, see page 47.[...]

37 Additional Operations This VCR (Recorder) LINE-2 IN : Signal flow VMC-810HG audio/video cable (not supplied) TV Other VCR (Player) Editing with another VCR How to hook up to recor d on this VCR How to hook up to a stereo system Connect LINE-2 IN AUDIO on this VCR to the audio output jacks on the stereo system, using the RK-C510KS audio cable (no[...]

Additional Operations 38 Operation (when recor ding on this VCR) Before you start editing • T urn on your TV and set it to the video channel. • Press INPUT SELECT to display “L2” (or “L1”) in the display window . • Press SP/EP to select the tape speed, SP or EP . • On this VCR, press EDIT to display “EDIT” in the display window [...]

39 SmartFile Function SmartFile Function About the SmartFile function SmartFile* allows you to view the contents of your video tape (recor ding date, channel, etc.) on the TV screen. It is no longer necessary to r ewind, fast-forward, or play back a tape to find out what is r ecorded. Y ou can also locate and start playback of a specific program, o[...]

SmartFile Function 40 Labeling a recor ded program and tape (page 53) Y ou can attach an electronic “label” to the video tape and it’s programs on the SmartFile list. Labeling the recor ded programs enables you to find a program easily when you want to play it back. Also, once you label a program which you set to r ecord regularly (i.e. every[...]

41 SmartFile Function Recor ding using the SmartFile function T o use the SmartFile function, attach the SmartFile label to the spine of the cassette tape. If you recor d a program on a tape with a SmartFile label, program data, such as the date and channel, is automatically stored in the memory of the SmartFile label. Attaching the SmartFile label[...]

SmartFile Function 42 Recording using the SmartFile function (continued) Recording a pr ogram on the SmartFile tape When recor ding a program on the SmartFile tape, no matter what method you use to recor d the program (normal recor ding, the VCR Plus+ GOLD system recording, etc.), pr ogram data (date, channel, recor ding start time, etc.) is stored[...]

43 SmartFile Function Tips • The station ID appears on the TV screen only when you complete Smart Channel Mapping and the VCR receives the program information signal (see page 54 of the supplied hookup/setup manual). • When the VCR receives the pr ogram information signal, the program name may appear in place of the day of the week, recor ding [...]

SmartFile Function 44 Recording using the SmartFile function (continued) Recording after locating the Blank Time space The SmartFile function identifies not only the largest amount of available blank space, but also recor ded material that doesn’t have corresponding program data stor ed in the SmartFile label. The longest available recor ding spa[...]

45 SmartFile Function 3 Press M / m to select BLANK TIME. BLANK TIME is on page 1 of the SmartFile search list. 4 Press SP/EP to select the tape speed, SP or EP . The BLANK TIME changes according to the selected tape speed. Select a tape speed that matches the length of the program you want to recor d. 5 Press OK. The VCR goes to the beginning of t[...]

SmartFile Function 46 Recording using the SmartFile function (continued) • If the second pr ogram starts recor ding 15 minutes or more in EP mode or 5␣minutes or more in SP mode after the first program starts, the data for both programs appears. In this case, the stored program’s r ecording time is updated to the time when the second program [...]

47 SmartFile Function Setting timer recor ding in the Blank Time space If you set the timer to recor d programs while a SmartFile tape is inserted, the VCR searches for the Blank T ime space. When the Blank T ime space is located, the VCR goes to the beginning of the Blank T ime space and stands by for recor ding. If there is a recorded program aft[...]

SmartFile Function 48 Recording using the SmartFile function (continued) • When setting the timer manually (for details, see page 16): 1 Press MENU, then pr ess M / m to select TIMER SET/CHECK and press OK. 2 Set the date, start and stop times, channel number and tape speed. 3 Press , to confirm the setting and pr ess OK. The AUTO BLANK SEARCH sc[...]

49 SmartFile Function • If the remaining length of the first pr ogram is 15 minutes or less in EP mode or 5␣minutes or less in SP mode after being overwritten by the second program, the first program data is erased. • If the second pr ogram starts recor ding 15 minutes or more in EP mode or 5␣minutes or more in SP mode after the first pr og[...]

SmartFile Function 50 Selecting and playing a pr ogram Y ou can automatically locate and start playback of a program r ecorded on the SmartFile tape. Select a program in the SmartFile search list. The SmartFile search list can contain up to 12 programs. Before you start… • T urn on your TV and set it to the video channel. SMARTFILE M / m OK p .[...]

51 SmartFile Function Tip • If you set SMAR TFILE LIST to AUT O in the ADV ANCED OPTIONS menu, the SmartFile search list appears automatically when you insert a SmartFile tape (see page 36). Note • Y ou may not be able to locate the beginning of the selected program corr ectly when: – the SmartFile tape contains one or more short length (less[...]

SmartFile Function 52 Checking the contents of a tape Y ou can display the program data list of a SmartFile tape on the TV screen. It is not necessary to insert the tape into the VCR. This feature allows you to quickly find a specific pr ogram or to find a tape with enough recor ding space. The SmartFile check list can contain up to 12 programs. Be[...]

53 SmartFile Function Labeling a r ecorded pr ogram and tape Y ou can electronically “label” a pr ogram and select a category , such as SPECIAL or MOVIE, for a recor ded program in the SmartFile list. Y ou can also label a tape. Up to 18 characters can be input for a program and tape label. M / m / , OK MENU Labeling a recor ded program and sel[...]

SmartFile Function 54 Labeling a recor ded program and tape (continued) 2 Press MENU, then pr ess M / m to select SMAR TFILE EDIT and press OK. The SMAR TFILE EDIT menu appears. 3 Press M / m to select a pr ogram. 4 Press , . The cursor moves to the program label input position. 5 Label the program. 1 Press M / m to select a character . Each time y[...]

55 SmartFile Function SMARTFILE EDIT MON p . 1 8/10/99~8/16/99 6: 3 0 PM CH 16 6 / 8 SP M 0 0 1 / 8 TUE 2: 3 0 PM CH 8 3 H 0 SP M 0 5 H 0 EP M 0 3 H 0 SELECT : CONFIRM : OK 1 3 / 81 Nick & Matt COMEDY 7 Press M / m to select a category . Each time you press m , the category changes as shown below . SPECIAL t MOVIE t NEWS t SHOW t SPORTS t KIDS [...]

SmartFile Function 56 Labeling a recor ded program and tape (continued) Labeling a tape Before you start... • T urn on your TV and set it to the video channel. M / m / , OK MENU 1 Insert a SmartFile tape. 2 Press MENU, then pr ess M / m to select SMAR TFILE EDIT and press OK. The SMARTFILE EDIT menu appears. 3 Press M to select the tape title. CL[...]

57 SmartFile Function SMARTFILE EDIT p . 1 6 / 8 SP M 0 0 1 / 8 3 H 0 SP M 0 5 H 0 EP M 0 3 H 0 SELECT : 1 3 / 81 Someday Nick & Matt Rock Box DRAMA COMEDY MUSIC NEXT : BACK : F CONFIRM : OK SMARTFILE EDIT p . 1 6 / 8 SP M 0 0 1 / 8 3 H 0 SP M 0 5 H 0 EP M 0 3 H 0 SELECT : 1 3 / 81 Someday Nick & Matt Rock Box DRAMA COMEDY MUSIC NEXT : BACK[...]

SmartFile Function 58 SMARTFILE Pr otecting a r ecorded pr ogram Y ou can protect a recor ded program using the SmartFile function from accidental over-r ecording or erasure. When you start recor ding from a position prior to the protected pr ogram, the recor ding stops automatically before the protected pr ogram. Before you start… • T urn on y[...]

59 SmartFile Function T o unlock the protected pr ogram Press < in step 4 above. The indicator disappears and you can r ecord over this program. Tips • When you start r ecording from a position prior to the protected pr ogram, the recor ding automatically stops no more than about 3 minutes in SP mode and about 8 minutes in EP mode befor e the [...]

SmartFile Function 60 Erasing the data of an unwanted pr ogram Y ou can erase an unwanted program from the SmartFile list. When you erase a program fr om the list, that portion of tape is subject to Blank T ime space priority . Before you start… • T urn on your TV and set it to the video channel. DISPLA Y CLEAR SMARTFILE M / m p . 1 BLANK TIME [...]

61 SmartFile Function 3 Press M / m to select a program you want to erase from the list. 4 Press CLEAR. The selected program is erased fr om the SmartFile list. If you erase a pr ogram by mistake, press DISPLA Y to make the pr ogram reappear . 5 Press SMAR TFILE. The SmartFile search list disappears. Tip • If you set SMAR TFILE LIST to AUT O in t[...]

SmartFile Function 62 Registering the contents of a r ecorded tape in the SmartFile label The VCR will register pr ograms recor ded on a tape in the memory of a new SmartFile label by detecting the index signals indicating the start of recor ded programs. Y ou can register up to the 12th program fr om the start of the tape. The programs appear fr o[...]

63 SmartFile Function T o check the information of a register ed program Press SMAR TFILE. The SmartFile search list appears. The r egistered program number , registration date and r ecording time appear in this list. Note that the registration date dif fers from the r ecorded date. Tips • The programs r ecorded on the tape can be register ed aga[...]

SmartFile Function 64 Storing pr ogram data from the DIRECTV digital satellite r eceiver (Pr ogram Data Download) If you connect a DIRECTV digital satellite receiver equipped with the Program Data Download function and use the timer r ecording of the DIRECTV digital satellite receiver , the program and category name transmitted from the DIRECTV dig[...]

65 SmartFile Function Setting up the DIRECTV digital satellite receiver Y ou have to set the VCR brand number on the DIRECTV digital satellite receiver . For example, select “99” in the VCR CONTROL menu to use a Sony VCR with the SmartFile function. For details, refer to the instr uction manual of your DIRECTV digital satellite receiver . Stori[...]

Additional Information 66 T roubleshooting If you have any questions or problems not cover ed below , please consult your nearest Sony dealer . Symptom The `/1 switch does not function. The power is turned on but the VCR does not operate. The clock has stopped and “–:– –” lights in the display window . The playback picture does not appear[...]

67 Additional Information Symptom A TV program does not appear on the TV screen. TV reception is poor . The tape starts playing as soon as it is inserted. The tape is ejected when you press z REC. Nothing happens when you press z REC. Recording stops halfway . The timer does not operate. Remedy • Make sure the TV is set to the channel for the VCR[...]

Additional Information 68 Others Symptom A tape cannot be inserted. The remote commander does not function. The channels on the VCR cannot be changed. The tracking meter does not appear on the screen. Y ou cannot control other TVs. The SMAR TFILE screen appears when a tape is not inserted. The VCR needs to be cleaned. Remedy • Check that a tape i[...]

69 Additional Information Specifications Timer section Clock Quartz locked T imer indication 12-hour cycle T imer setting 8 programs per month (max.) Power back-up Built-in self-charging capacitor Back-up duration: up to 1 hour at a time General Power requir ements 120 V AC, 60 Hz Power consumption 35 W Operating temperature 5°C to 40°C (41°F to[...]

Additional Information 70 Index to parts and contr ols Refer to the pages indicated in parentheses ( ) for details. Front panel 1 `/1 POWER switch/indicator (14) 2 Remote sensor 3 SmartFile sensor (39, 52) 4 SMAR TFILE indicator (44, 52) 5 REALITY REGENERA TOR indicator (32) 6 T ape compartment 7 SMAR TFILE button (42, 50, 58) 8 CURSOR m / M button[...]

71 Additional Information Display window STEREO SAP LP SP EP VIDEO APC EDIT VTR 123 AV INSERT BLANK 1 T imer indicator (14, 17) 2 Child Lock indicator (15) 3 STEREO indicator (29) 4 SAP (Second Audio Program) indicator (29) 5 VIDEO indicator (9) 6 T ape speed indicator (8) 7 APC (Adaptive Picture Contr ol) indicator (33) 8 EDIT indicator (38) 9 BLA[...]

Additional Information 72 Rear panel 1 AC power cor d 2 S-LINK (CONTROL S IN) jack (37) 3 CABLE BOX CONTROL (CONTROL S OUT) jack 4 LINE-1 IN AUDIO R/L/VIDEO jacks (37, 64) 5 CPD (Contr ol and Program Data) IN jack (64) 6 VHF/UHF IN connector (64) 7 VHF/UHF OUT connector (64) 8 RF (Radio Frequency) UNIT switch 9 LINE OUT AUDIO R/L/VIDEO jacks Index [...]

73 Additional Information Remote commander 1 TV RECEIVER / VIDEO switch 2 Z EJECT button (5) 3 TV/VIDEO button (9) 4 DISPLA Y button (9) 5 SP (Standar d Play)/EP (Extended Play) button (8, 45) 6 × 2/RECEIVER VOL (volume) + button (20) 7 z REC (recor d) button (8, 26) 8 MUTING button 9 y SLOW/RECEIVER VOL (volume) – button (20) 0 SMAR TFILE butto[...]

Additional Information 74 qf `/1 (power) switch (14) qg COUNTER/REMAIN button (9) qh AUDIO MONITOR button (29) qj VCR Plus+ button (13) qk CLEAR button (6, 14, 28, 57) ql Number buttons (14) w; ENTER button (12, 14, 23) wa CH (channel) +/– buttons (8) ws VOL (volume) +/– buttons wd . / > INDEX SEARCH buttons (31) wf SMAR T CUE button (5) Ind[...]

75 Additional Information A, B Adjusting picture 32 tracking 32 Advanced option 34 APC (Adaptive Picture Control) 33 Audio track 30 Auto T ape Speed 35 C Child Lock 15 Cleaning the video heads 66 Counter 6 D DIRECTV System 64 Dubbing. See Editing. E Editing 37 EP mode 8 F, G Favorite channel 23 H Hi-fi audio track 30 I, J, K Index Search 31 L Locki[...]

uick r eference to using the VCR 2 Enter the PlusCode number . 3 Select ONCE, DAIL Y , or WEEKL Y , then press ENTER. 4 Insert a tape. 5 Press `/1 to turn off the VCR. T o watch TV 1 T urn off your VCR, or press the VCR’s TV/ VIDEO button until the VIDEO indicator in the display window goes off. 2 Select the channel with your cable box (if you ha[...]