Sony VPL-VW80 manual

Operating Instructions VPL- VW80 © 2008 Sony Corporation 4-110-071- 13 (1) Video Projector[...]

2 WARNING To reduce the r isk of fire or electric shock, do not expose this apparatus to rain or moisture. To avoid electrical shock, do not open the ca binet. Refer servicing to qualified personnel onl y. THIS APPARATUS MUST BE EARTHED. For customers in the USA If you have any questions about this product, you may call: Sony Customer Information S[...]

3 Disposal of Used Lamp Thi s proje ctor’ s lamp co ntains mercu ry and should be di sposed of prop erly. C onsu lt your local autho rities regarding safe disposa l. The materia l contained in this lamp a re simil ar to th ose of a fluo rescent lamp, so yo u should dispo se of it in the same way. For custom ers in the Unite d States Lamp in th is[...]

4 For custom ers in Canad a This Class B digital appara tus complies with Canadian ICES-003. For custom ers in Europe Disposal of waste batteries (appl icable in the European Union and other European co untries with separate collection systems) This symbol on the battery or on the packaging indicates that the battery provided with this product shal[...]

5 Table of Contents Precautions ..... ............................ ........ 7 Front/Right Side ................ ............... .. 8 Rear/Bottom .............. ................. ........ 9 Remote Control ............ ................. ... 10 Unpacking .............. ................. ......... 11 Step 1: Installing the Projector ......... 12 Before[...]

6 About the Control for HDMI ........... 61 About the x.v.Color ......... ................ 62 Troubleshooting ............. ................. . 63 Warning Indicators ..................... 66 Message Lists ...................... ....... 67 Replacing the Lamp and the Air Filter and Cleaning the Ventilation Holes (intake) ............. .............. [...]

7 Precautions On safety • Check that the operating voltage of your unit is identical with the voltage of your local power supply. • Should any liquid or solid object fall into the cabinet, unplug the unit and have it checked by qualified personnel before operating it further. • Unplug the u nit from the wall outlet if it is not to be used for[...]

8 Front/Right Side You can use the buttons on the control panel with the same names as those on the remote control to operate the projector. Location of Contr ols INPUT butto n ( 1 page 30) MENU button ( 1 page 42) ON/STANDBY indicator ( 1 page 22) Remote control detector ( 1 page 22) Ventilation holes (exh aust) ( 1 page 13) ? / 1 (ON/STANDBY) swi[...]

9 Location of Controls Rear/Bottom Filter holde r ( 1 page 71) Ventilati on holes (int ake) ( 1 page 13) Lamp cover ( 1 page 70) Ventilati on holes (int ake) ( 1 page 13) Projector suspensio n support attaching ho le ( 1 page 81) Adjuster s ( 1 page 27) Ventilati on holes (int ake) ( 1 page 13) Ventilati on holes (int ake) ( 1 page 13) Ventilati on[...]

10 Remote Control Infrared tr ansmitter ? / 1 (On/st andby) switch ( 1 page 23) COLOR SPACE button ( 1 page 38) M / m / < / , (arrow)/ (enter) but tons ( 1 page 42) RESET button ( 1 page 42) MOTION ENHANCER button ( 1 page 38) CONTRAST +/– butto n ( 1 page 47) BRIGHTNESS +/– butto n ( 1 page 48) INPUT button ( 1 page 30) LIGHT button Illumin[...]

11 Connections and Preparations This section describes how to install the projector and screen, how to connect the equipment from which you want to project the picture, etc. Unpacking Check the carton to make sure it contains the following items: Inserting the batteries into the remote control Caution about handling t he remote control • Handle t[...]

12 Step 1: Installing the Projector The projector displays pictures output f rom a VCR or other device. The lens shift allows you to have broader options for placing the projector and viewing pictures easily. Unsuitable installation Do not place the projector in the following situations, which may cause malfunc tion or damage to the projector. Poor[...]

13 Connections and Preparations Improper use Do not do any of the following while using the projector. Blocking the ventila tion holes (intak e or exhaust) Tip For details on the locati on of the ventilation holes (intake or exhaus t), see “Location of Controls” on page 8. Tilting front/rear and left/right Avoid using the projecto r tilted at a[...]

14 The installation distance between the projector and a screen varie s depending on the size of the screen or whether or not you use the lens shift features. 1 Determine the installation position of the projector and screen. You can obtain a good q uality picture if you position the projector so that the ce nter of the lens is within the area i nd[...]

15 Connections and Preparations When using the 16:9 aspect ratio screen size Unit: mm (inches) To calculate the installation positions L (minimum) = 31.1781 (1 7 / 32 ) × SS – 46.1543 (1 13 / 16 ) L (maximum) = 47.0644 (1 27 / 32 ) × SS – 42.3308 (1 21 / 32 ) y = –1.463 × x (mm or inch) + 8.0942 ( 5 / 16 ) × SS Screen Size SS (inche s) 40[...]

16 When using the 4:3 aspect ratio screen size Unit: mm (inches) To calculate the installation positions L (minimum) = 38.1569 (1 1 / 2 ) × SS – 46.1543 (1 13 / 16 ) L (maximum) = 57.5992 (2 9 / 32 ) × SS – 42.3308 (1 21 / 32 ) y = –1.463 × x (mm or inch) + 9.9060 ( 3 / 8 ) × SS Screen Size SS (inches) 40 60 80 100 120 150 200 250 300 (mm[...]

17 Connections and Preparations 2 Position the projector so that th e lens is parallel to the screen. 3 Project an image on the screen and adjust the picture so that it fits the screen. ( 1 page 22) T o project an image, c onnect video equipment to the projector . ( 1 page 18) When using a screen with an une ven surface, stripes pattern may rarely [...]

18 Step 2: Connecting the Projector When making connections, be sure to do the following: • Turn off all equipment before making any connections. • Use the proper cables for ea ch connection. • Insert the cable plugs properly; poor connec tion at the plugs may cause a malfunction or poor picture quality. When pulling out a cable, be sure to p[...]

19 Connections and Preparations To connect to a DVD player/recorder or Blu-ray Disc player/ recorder equipped with HDMI output You can enjoy better picture quality by connectin g a DVD player/recorder or Blu-ray Disc player/recorder equipped w ith HDMI output to the HDMI input of the projector. Moreover, if you have a Control for HDMI compatible eq[...]

20 To connect to a VCR equipped with the S video connector or video connector You can connect a DVD player/recorder, hard disk vide o recorder, VCR or laser disk player, which is not equipped with component video connectors. Tip If you do not know to which connector you shoul d connect the cable, S VIDEO INPUT (S video input connector) or VIDEO INP[...]

21 Connections and Preparations Tip When connecting an HD-Dsub15 pin cable, set “I nput-A Signal Sel.” in the Setup menu to “Auto” or “Computer.” If the input signal does not appear properly, se t it to “Computer.” ( 1 pages 54, 67) • When connecting an HDMI cable, make sure the V mark on the uppe r part of the HDMI input of the p[...]

22 Step 3: Adjusting the Picture Position Project an image on the screen and then ad just the picture position. Tip The ? / 1 (ON/STANDBY), INPUT, LENS, MENU, and M / m / < / , / (joystick) buttons on the side panel of the projector function the same as those on the remote control. Depending on the installation location of the proj ector, you ma[...]

23 Connections and Preparations Tips • You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting the Menu Language”. ( 1 page 28) • When “Auto Input Search” is set to “On” in the Function menu, the input terminal with effective signals is automatically displayed by pressing INPUT. ( 1 page 56)[...]

24 Tip When “Lens Control” is set to “O ff” on the Installation menu, you cannot adjust the picture position. ( 1 page 57) When “Test Patt ern” is set to “Off” on the F unc tion menu, the test pattern is not display ed. ( 1 page 56) To adjust the horizontal position Press < / , . The picture projected on the screen moves right or[...]

25 Connections and Preparations To adjust the vertical position Press M / m . The picture projected on the screen moves up or down by a maximum of 65% of the screen height from the center of the le ns. The range to move the picture pr ojected on the screen can be adju sted only within the octagon area illustrated below. In this connection, see “P[...]

26 Tip When “Lens Control” is set to “Off” on the Installation menu , you cannot adjust the picture size and the focus. ( 1 page 57 ) When “Test Patt ern” is set to “Off” on the F uncti on menu, the test pattern is not displayed. ( 1 page 56) Be sure to adjust the picture size and the focus by using buttons on the remote co ntrol or[...]

27 Connections and Preparations To adjust the tilt of the installation surface If the projector is installed on an uneven surface, use the a djusters to keep the projector level. Be careful not to catch your finger when turning the adjusters. Note Adjusters Turn to adjust.[...]

28 Step 4: Selecting the Menu Language You can select one of 16 languages for displaying the menu and other on-screen displays. The factory default setting is English. To change the current menu language, set the desired language with the menu screen. 1 Press MENU. The menu appears. 1 MENU button 2,3,4 M / m / < / , (arrow)/ (e nter) buttons[...]

29 Connections and Preparations 2 Press M / m to select the Setup menu, and press , or . The setting items of the selected menu appears. 3 Press M / m to select “Language,” and press , or . 4 Press M / m / < / , to select a language, and press . The menu changes to the selected language. To clear the menu Press MENU.[...]

30 This section describes how to operate the projector to view the picture from the equip ment connected to the projector. It also describes how to adjust th e quality of the picture to suit your taste. Projecting the Picture on the Screen * Set the “Input-A Signal Sel.” setting in the Se tup menu according to the signal input. When you set it [...]

31 Projecting Notes on input of HDMI signal The projector adjusts the RGB dynamic range of the e quipment connected with HDMI cable to the following to suit the H DMI standard and display in best picture quality. When video signal is input: Limited (16-235) When computer signal is input: Full (0-255) When a signal other than those of HDMI standard [...]

32 Operating the BRAVIA Sync Compatible Equipment with the Remote Control of the Projector By using the remote control of the projector, you can directly operate the BRAVIA Sync compatible equipment connected to the HDMI 1 and HDMI 2 INPUT connectors of the projector. Only the connected equipment that is currently being viewed can be operated. To o[...]

33 Projecting Using the OPTIONS button to operate 1 Press OPTIONS while viewing pictures from the connected BRAVIA Sync compatible equipment. Device Control screen is displayed. 2 Select the desired menu item to operate with M/m/ . The screen of the select ed menu item is displayed. Operate through the menu or select a menu item with M/m/</,/ . [...]

34 Selecting the Wide Screen Mode You can enjoy various wide screen modes accord ing to the video signal received. Press WIDE MODE. Each time you press the button, you can select the “Wide Mode” setting. You can also select it using the menu. ( 1 page 51) Wide Zoom A 4:3 aspect ratio picture is enlarged naturally to fill the screen. The upper a[...]

35 Projecting • You can adjust the vertical position of the picture with “V Center” and “Vertical Size” in the Screen menu only when “Zoom” is selected. ( 1 page 52) • Depending on the type of Anam orphic lens, part of the sc reen may be cut off wh en you zoom in on the picture. Check the specifications of the Anamorphic lens you us[...]

36 Notes on selecting the wide screen mode The projector is featured with the WIDE MODE. When changing the settings of WIDE MODE, use caution as described below. • Select the wide screen mode taking into account that changing the aspect ratio of the original picture will provide a different look from that of the origina l image. • Note that if [...]

37 Projecting Selecting the Picture Viewing Mode You can select the picture viewing mode that best suits the type of program or room conditions. Press one of the PICTURE MODE buttons (DYNAMIC, STANDARD, CINEMA and USER 1, USER 2 and USER 3). DYNAMIC Vivid picture quality that enhances the sharpness and contrast of the picture. STANDARD Standard pic[...]

38 Adjusting the Picture Quality You can easily adjust the picture quality that suits your taste by selecting the adjustment items with the remote control. The adjusted data can be stored in each picture mode. Selecting to Directly Adjust the Desired Menu Item The following menu items can be adjusted by using the butto ns on the remote control. “[...]

39 Projecting Selecting Desired Adjust Menu Items in the Order 1 Press ADJ PIC. Each time you press the button, the following adjustment windows are displayed in sequence. “Advanced Iris”, “Lamp Control”, “Film Projection”, “Motion Enhancer”, “Contrast”, “Brightness”, “Color”, “Hue”, “Color Temp.”, “Sharpness?[...]

40 Adjusting the Pictur e Using Real Color Processing The Real Color Processing (RCP) feature allows you to adjust the color and hue of each target of the projected picture you specify independently. You can thus obtain a picture more suitable to your taste. Tip Freeze the scene of the video source when you are adju sting the picture using Real Col[...]

41 Projecting Using the Supplied Software to Adjust the Picture Quality (ImageDirector3) By using the “ImageDirector3” (supplied as a CD-ROM), you can make the desired gamma correction from a com puter connected to the projector. Connect the REMOTE connector of the projector with a computer and start-up “ImageDirector3” on the computer. For[...]

42 This section describes how to make various adju stments and settings using the menus. Operation through the Menus The projector is equipped with an on-screen menu for making various adjustments and settings. Some of the adjustable/setting items are displayed in a pop-up menu, in a setting menu or adjustment menu with no main menu, or in the next[...]

43 Using the Menus 1 Press MENU. The menu window appears. 2 Press M / m to select a menu item, and press , or . The items that can be set or adjusted with the selected menu appear. The item presently selected is shown in yellow.[...]

44 3 Press M / m to select an item you want to set or adjust and press , or . The setting items are displayed in a pop-up menu, in a setting menu, in an adjustment menu or in the next menu window. Pop-up menu Setting items Next menu window Setting items Setting menu Adjustment menu[...]

45 Using the Menus 4 Make the setting or adjustment of an item. When changing the adjustment level To increase the value, press M / , . To decrease the value, press m / < . Press to restore the original screen. When changing the setting Press M / m to change the setting. Press to restore the original screen. You can restore the original scre en [...]

46 Picture Menu The Picture menu is used for adjusting the picture. These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” ( 1 page 79). Note Picture Mode Y ou can select the picture viewing mo de that best suits the type of picture or the environment. Dynamic: V i [...]

47 Using the Menus Cinema Black Pro Advanced Iris Switches the iri s function during projection. Auto 1: Automatically switches to an optimum iris according to a projected scene. The contrast of the scene is emphasized most. Auto 2: An optimum iris becomes smaller than when set to “ Auto 1”. The contrast of the scene becomes reduced. Sensitivit[...]

48 Brightness Adjusts the brightness of the pictur e. The higher the setting, the brighter the picture. The lo wer the setting, the darker the picture. Y ou can make adjustments by pre ssing the BRIGHTN ESS+/– on the remote control. Color Adjusts the intensity of the color density . The higher the sett ing, the greater the i ntensity . The lower [...]

49 Using the Menus Expert Setting Gamma Correction Adjusts the response ch aracteristics of the tone of the picture. Select a fa vo rite tone from 6 options. Gamma 1: Makes th e scene much brighter ov erall. Gamma 2: Makes th e scene brighter ov erall. Gamma 3: Makes th e scene slightly brighter o verall. Gamma 4: Makes the scene darker o verall. G[...]

50 Advanced Picture Menu The Advanced Picture is used for adjusting the picture more. RCP (Real Color Processing) Y ou can adjust the color and hue of each selected portion of the picture i ndependently . User 1, User 2, User 3: Y ou can adjust the picture using Real Color Processing and store the settings. On ce the settings are stored, you can vi[...]

51 Using the Menus Screen Menu The Screen menu is used to adjust the input signal. You can adjust the size o f the picture, and select wide screen mode, etc. . These items may not be available, depending on the type of input signal. For details, see “Input Signals and Adjustable/Setting Items” ( 1 page 79). Note Wide Mode (Video signa l) Y ou c[...]

52 Over Scan Hides the outline of the picture. On: Hides the outline of th e input picture. Select this setting when noise appears along the edge of the picture. Off: Projects the whole of the input picture. Tip T o display the displayable region within the four direction s of the screen, refer to “Blanking” on the Installation menu ( 1 page 58[...]

53 Using the Menus Setup Menu The Setup menu is used to change the factory preset settings, etc. Status Sets whether or not the on-screen display is displayed. Set to “Off” to turn of f the on-screen displays except for certain menus, message when turning off the po wer , and warning messages. Language Selects the language used in the menu and [...]

54 Power Sav ing Sets the power saving mode. When set to “On”, the projector goes into power sa ving mode if no signal is input for 10 minutes. At that time, the ON/ST ANDBY indicator lights in orange, then the screen becomes dark. In p ower saving mode, the po wer saving mode is cancelled if a signal is input or any b utton on the projector or[...]

55 Using the Menus Function Menu The Function menu is used for changing the settings of the various functions of the projector. HDMI Setting Y ou can change the settings of the Control for HDMI function. Control for HDMI: Selects the function whether to turn the Control for HDMI function ef fecti ve when the HDMI 1 and HDMI 2 connectors are connect[...]

56 Device L ist: Lists all the Control for HDMI compatible equipment connected to the projector . All equipment listed (except A V amplif ier) can be selected with SYNC MENU of the remote cont rol of the projector. When “Enable” is selected, the Contro l for HDMI setting of Son y equipment (A V amplifier , video, etc.), which is compatible with[...]

57 Using the Menus Installation Menu The Installation menu is used fo r changing the installation settings. V Keystone Corrects the vertical trap ezoidal distortion of the picture. When the bottom of the trapezoid is longer than the top ( ): Sets a lower v alue (– direction) When the top of the trapezoid is longer than the bottom ( ): Sets a high[...]

58 Blanking This feature allo ws you to adjust the displayable regio n within the four directions o f the screen. Select each screen edge “Left / Right / T op / Bottom” on the Blanking adjustment screen with M / m buttons. Adjust the desired Blanking value with < / , bu tt o n. When both the “Blanking” and the “V K eysto ne” are adju[...]

59 Using the Menus Set the amount to adjust with < / , buttons for the horizontal direction (H dir ection) and with M / m buttons for the vertical direction (V direction). Y ou can sel ect the position to adjust again by pressing . Reset: Returns to the factory se ttings. Depending on the adjustments made abov e, colors may become unev en or the[...]

60 Information Menu The Information menu displays the model name , serial nu mber, the horizontal and vertical frequencies of the input signal and th e cumulated hours of usage of the lamp. • fH (horizontal frequency) and fV(vertical frequency) may not be displayed depending on the input signal used on the projector. • You cannot change the dis[...]

61 Others This section describes about the other functions, how to solve the problems, how to replace the lamp and air filter, etc. About the Control for HDMI What is the Control for HDMI? Control for HDMI is an HDMI standard mutual control function which uses the HDMI CEC (Consumer Electronics Control) specificati on. By connecting a variety of So[...]

62 • The available functions of the Control for HDMI differ depending on each equipment. Refer to the op erating instruction of each equipment. • Some synchronizati on may be available with equipment of other brands with similar functions, but it is no t guaranteed. About the x.v.Color • “x.v.Color” is a prom otion name given to the produ[...]

63 Others Troubleshooting If the projector appears to be operating erratically, try to diagnose and correct the problem using the following instructions. If the pr oblem persists, consult with qualified Sony personnel. Power Picture Symptom Cau se and Remedy The power is not turned on. c The power may not turn on if you turn the po wer off with ? /[...]

64 On-screen display Remote control The picture is too dark. c Adjust the “Contrast” or “Bri ghtness” of the Picture menu properl y . ( 1 pages 47, 48) The picture is not clear . c Adjust the focus. ( 1 page 26) c Condensation has accumulated on the lens. Leav e the projector for about 2 hours with the power on. The picture flickers. c For [...]

65 Others Others Symptom Cause and Remedy The fan is noisy . c Check the setting of “Cooling S etting” in the Setup menu. ( 1 page 53) c Make sure that the room temperature is not too high. c Check the installation conditions. ( 1 page 12) The number of fan rotation increases to maintain the product reliability of the projector’ s components [...]

66 The ON/STANDBY or LAMP/COVER indicator lights up or flashes if there is any trouble with your projector. Warning Indicators Symptom Cause and Remedy LAMP/COVER flashes in red. (A repetition rate of 2 flashes) c Close the lamp cov er securely , then tighten the screws securely . ( 1 page 70) c Close the filter holder securely . ( 1 page 71) LAMP/[...]

67 Others When a warning indicator other than the above sta r ts flashing, and the symptom persists even after carrying out the above methods, consult with qualified Sony personnel. Warning messages ON/ST ANDBY flashes in red. (A repetition rate of 5 times) c The lens protector is not fully open. T urn the po wer of the projector off and then on ag[...]

68 Caution messages Please clean the filter . c It is time to clean the air filter . Clean the air filter . ( 1 page 72) T o clear this message, press any b utton either on the remote control or the control panel of the projector once. Please clean the filter . Hav e you finish ed? Y es No c It is time to clean the air filter . Clean the air filter[...]

69 Others Replacing the Lamp and the Air Filter and Cleaning the Ventilation Holes (intake) Tools you need to get started: • Projector Lamp LMP-H201 (Optional) • Standard Philli ps screwdriver • Cloth (for scratch protection) The lamp used for the light source has a certain lifespan. Whe n the lamp dims, the color balance of the picture becom[...]

70 3 Loosen the screw on the lamp cover with a Philips screwdriver, and then open the lamp cover. 4 Loosen the 3 screws on the lamp with the Phillips screwdriver. Hold up the handle, then pull the lamp straight out. 5 Hold the handle of the new lamp and push it in securely until it reaches the end, and then tighten the 3 screws. Be careful not to t[...]

71 Others 7 Remove the filter holder. 8 Remove the air filter. 9 Attach the new air filter so that it fits into the each claws (10 positions) on the filter hold er. Attach the air filter aligning it with the shape of the filter holder. Also, do not touch the fan after removing the air filter that is set deep inside the projector. 10 Attach the filt[...]

72 • Be sure to turn off the projector and unplug the power cord before replacing the lamp, then check the ON/STANDBY lamp has already been turned off. • The projector will not turn on unless the lamp is securely installed in place. • The projector will not turn on unless the lamp cover are securely closed. • To cancel a message displayed o[...]

73 Others Black points and bright points (red, blue, or green) on the screen The projector is manufactured using high- precision technology. You may, however, see tiny black points and/or bright points (red, blue, or green) that continuously appear on the projector. This is a norma l result of the manufacturing process and does not i ndicate a malf[...]

74 Specifications System Projection system SXRD panel, 1 lens, pr ojection syste m LCD panel 0.61-inch (15. 4 mm) SXRD panel 6,220,800 pixels (2,073,600 p ixels × 3) Lens 1.6 times zoom lens (motorized) f=18.5 mm to 29. 6 mm F2.50 to F3.40 Lamp 200 W Ultra High Pressure Lamp Projection picture size 40 inches to 300 in ches (1,016 mm to 7,620 mm) ([...]

75 Others Operating humidity 35% to 85% (no condensation) Storage temperature –20°C to +60°C (–4°F to +140°F) Storage humidity 10% to 90% Supplied accessories Remote control RM-PJVW80 (1) Size AA (R6) manga nese batteries (2) AC power c ord (1) Operating Instructions (1) CD-ROM (ImageDirector3) (1) Design and specifications are subject to c[...]

76 Warning on power connectio n Use a proper power cord for your local power supply. * Use a rated plug that complies with the regulat ion of each country/regio n and the specifications. The following table shows the signals and video formats which you can project using this unit. When a signal other than the preset signal shown below is input, the[...]

77 Others 9 1080/24PsF (48i) 1080/24PsF (48i) (1920 × 1080i) 27.000 48. 000 SonG/Y – 10 720/60p 720/60p (1280 × 720p) 45.000 60. 000 SonG/Y – 11 720/50p 720/50p (1280 × 720p) 37.500 50. 000 SonG/Y – 12 1080/60p 1080/60p (1920 × 1080p) 67.500 60. 000 – – 13 1080/50p 1080/50p (1920 × 1080p) 56.260 50. 000 – – 14 1080/24p 1080/24p ([...]

78 Preset memory numbers for each input signal Analog signal Digital signal * Some digital signals input from computers may be displayed as preset memory number of Component or Video GBR signal. 47 1280 × 1024 VESA 60 63.974 60.013 H-pos, V -pos 1696 50 1400 × 1050 SXGA + 65.317 59.978 H-neg, V -pos 1864 55 1280 × 768 1280 × 768/60 47.776 59.87[...]

79 Others The items in the menus available to adjust differ depending on the input signal. The following tables indicate them. The items that cannot be adjusted are not displayed in the menu. Picture menu z : Adjustable/can be set – : Not adjustable/cannot be set Input Signals and Adju stable/Setting Items Item Input signal Video signal Component[...]

80 Screen menu z : Adjustable/can be set – : Not adjustable/cannot be s et * 1 : The setting can be made only wh en “x.v .Color” is set to “Of f”. * 2 : The setting can be made only when “W ide Mode” is set to “Full” and “Over Scan” is set to “On” in the S creen m enu. * 3 : If the input signal is from a computer, the sett[...]

81 Others Ceiling Installation Use the PSS-H10 Projector Suspension Support when you install the projector on a ceiling. The projection distan ces for ceiling installation are shown be low. L’: Distance between the sc reen and the installation h ole at the ceiling sid e of the ceili ng mount unit ( front side) y’: Distance betwee n the ceiling [...]

82 When using the 16:9 aspect ratio screen size Unit: mm (inches) To calculate the installation positions L’ (minimum) = 31.1781 (1 7 / 32 ) × SS + 137.7 (5 13 / 32 ) L’ (maximum) = 47.0644 (1 27 / 32 ) × SS + 130.8 (5 5 / 32 ) y’ (minimum) = 6.2263 ( 1 / 4 ) × SS y’ (maximum) = 8.0942 ( 5 / 16 ) × SS + 268.5 (10 9 / 16 ) When using the[...]

83 Others Attaching the PSS-H10 projector suspension support For details on installation on a ceiling, refer to the Installation manual for Dealers of the PSS-H10. Make sure to consult with a qualified Sony personnel for installation. The installation measurements are shown below when installing the projector on a ceiling using the PSS-H10. Top vie[...]

84 Front view Side view Ceiling The bottom surface of the mount bracke t Center of the supporting pole Center of the lens 150 (6) 75 (3) 175 (7) 93.5 (3 3 / 4 ) 235 (9 3 / 8 ) 235 (9 3 / 8 ) 470 (18 5 / 8 ) Center o f the lens Front of th e cabinet 202.3 (8) 130 (5 1 / 8 ) 247.3 (9 3 / 4 ) 235.1 (9 3 / 8 ) 482.4 (19)[...]

85 Others Index A Adjust Signal APA ......... ......... ........... ......... ........... .... 52 Phase ........ ......... ........... ........... ......... .... 52 Pitch ....... ........... ........... ......... ........... .... 52 Shift ....... ........... ........... ......... ........... .... 52 Adjuster ....... ........... ......... ..........[...]

86 Standard .... ......... ........... ......... ........... ... 46 USER ........ ......... ........... ........... ......... ... 37 User ........ ......... ........... ........... ......... ..... 46 Precautions ... ......... ........... ........... ......... ..... 7 Preset Memory ............. ......... ........... ....... 60 Preset Signal s .....[...]

[...]

S ony Corporation Printed in Japan[...]