Speco Technologies CVC6146SCFF manual

INSTR UCTION MANU AL 550 Line Color Dome Camera F ocus F r ee Speco T echnologies is constantly de veloping pr oduct impr o vements. W e r eserve the right to modify pr oduct design and specifications without notice and without incurring any obligation. Re v. 6/9/10 CVC6146SCSFF[...]

- 2 - CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO USER-SERVICEABLE PA RT S INSIDE . REFER SER VICING T O QUALIFIED SER VICE PERSONNEL. ISO14001 CA UTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION:T O REDUCE T HE RISK OF ELECTRIC SHOC K DO NOT REMOVE COVER(OR BACK). NO [...]

- 3 - Contents Contents 3 4 Precautions 5 Sefety Instructions 6 SPECIFICA TIONS 7 General F eatures 30 T rouble Shooting Menu Set Up 8 ▶ Adjust ▶ Reset ▶ Exit 28 29 29 ▶ Menu Set Up ▶ Lens Set Up ▶ Exposure ▶ Back Light ▶ D-WDR ▶ White Bal. ▶ Day & Night ▶ 3DNR ▶ Special 10 11 12 14 17 18 19 20 21 ◈ Camera T itle ◈ D[...]

- 4 - Pr ecautions Do not install the camer a in extr eme temperatur e conditions. Do not touch the fr ont lens of the camer a. Never k eep the camera pointed dir ectly at str ong light. Do not expose the camer a to r adioactivity. Do not install the camer a under unstable lighting conditions. Do not dr op the camer a or subject it to physical shoc[...]

- 5 - S ef et y Instructions Pr ecautions f or use Please handle this camer a car efully : ◑ This camera should be installed by qualied personnel only ◑ There are no user serviceable parts inside ◑ Do not disassemble this camera other than to make initial adjustments ◑ Use a UL approved regulated 24 volt AC or 12 volt DC power supply ◑[...]

CVC6146SCSFF ■ SPECIFICATIONS 550 Line color dome camer a F ocus free AI Motorized zoom Lens(2.8-10mm) 1/3" SONY Super HAD CCD NTSC=811(H) * 508(V) / P AL=795(H) * 595(V) NTSC=768(H) * 494(V) / P AL=752(H) * 582(V) 2:1 Interlace Internal / Line Lock Available BLC / HSBLC / Off Selectable 550TV Lines(Color), 600TV Lines(B/W) 52dB (AGC Off , W[...]

- 7 - General Features 3 D Filtering Method of Newly Advanced DNR Function Newly developed 3D filtering enhances Digital Noise reduction at low light levels . 3D F iltering of the Video Signal Optimises the Signal to Noise ratio , giving v astly improved low light visivility and a powerful Sens-Up function (up to 256 times magnification). 550 TV Li[...]

- 8 - SET UP MENU DEF A UL T SET MENU LENS EXPOSURE WHITE BAL. D A Y / NIGHT . 3D-DNR SPECIAL ADJUST RESET EXIT DC / MANU AL SHUTTER BRIGHTNESS AGC: --- SENS-UP BLC D-WDR RETURN SHARPNESS BL UE RED RETURN AT W A UT O/B/W COLOR/EXT ON R efer to the ne xt pa ge F ACT OR Y DC : LEVEL (0 ~100 Adjustable) ON (RANGE : 0 ~100 Le v el Selectable) / OFF Sav[...]

- 9 - SPECIAL MENU DEF A UL T SET MENU CAMERA TITLE OFF D - EFFECT ON MO TION ON PRIV ACY ON SYNC INT RETUEN ON / OFF END FREEZE / MIRROR/ D-ZOOM/ GAMMA/ NEG. IMA GE AREA SELECT : AREA 1 AREA DISPLA Y : ON / OFF LEFT / RIGHT : 0 ~ 100 Le v el Adjustable WIDTH : 0 ~ 100 Le v el Adjustable T OP / BO TT OM : 0 ~ 100 Lev el Adjustable HEIGHT : 0 ~ 100 [...]

- 10 - Menu items can be selected by using the OSD buttons of the camera 1. Press the Set Up button. * T he Set Up menu will be displayed on the monitor . 2. Move and select the required function using the Up and Down button. * Move the arrow indicator Up or Down to select the desired feature by pressing the Up or Down button. SETUP SETUP LENS EXPO[...]

- 1 1 - 3. Changing menu settings using the Left or Right button. * Available v alues or Status are displayed by pressing the Left or Right buttons . Press the button until desired v alue / status is displayed. 4. After completing the setting move the arrow indicator to EXIT and press the SET button to EXIT . 1. Move the arrow indicator to LENS usi[...]

- 12 - 3. Press the RETURN to return to the SETUP menu. NO TE * When DC is selected, the brightness can be adjusted. T he brightness control range is 1 ~ 100. Lens BRIGHTNESS RETURN 100 T his function is used to select Automatic or Manual shutter speed control. 1. On the Set Up menu screen select EXPOSURE by using the Up or Down button. 2. Select t[...]

- 13 - EXPOSURE SENS-UP SHUTTER BRIGHTNESS SENS-UP BLC D-WDR RETURN SENS-UP RETURN FLK - - - - HIGH AUTO BLC OFF x 2 NO TE * T o produce better results with FLK, do not use it in conjunction with the WDR mode in the BA CKLIGHT menu. * Desired shutter speed can be selected by user 1/60, 1/250, 1/500, 1/2000, 1/5000, 1/0000, 1/100000, FLK . * Brightn[...]

- 14 - * OFF : BLC function does not operate . * BLC : Users can select and define a specific area in a scene , and view the area clearly . * HSBLC : When there are simultaneous brightness & dark image areas HSBLC mak es both distinct. * RETURN: Select Return to save the changes in the EXPOSURE menu and retun to the SETUP menu. NO TE * Pressing[...]

- 15 - 3. Select a mode using the Left and Right buttons then press the SET button. Select BLC to adjust the desired BLC area and GAIN level. ① Move the arrow indicator to select the WIDTH of cells to increase or decrease by using the Left / Right button from 0 ~ 7 cells . ② Move the arrow indicator to select the HEIGHT of cells to increase or [...]

- 16 - 4. Select HSBLC(High Suppress Backlight Compensation) by using the Left and Right buttons then press the Set Up button to set up the desired HSBLC area and GAIN level. * Move the arrow indicator to RETURN and press the Set Up button after complete the BLC area set to return to EXPOSURE menu. * LEVEL : Adjust the HSBLC sensitivity by selectin[...]

- 17 - D-WDR(digital WDR) T his camera provides intelligent light level control to overcome even strong backlight conditions . 1. Move the arrow indicator to D-WDR using the Up or Down button on the EXPOSURE menu screen. 2. Select the desired feature by using the Left or Right button. EXPOSURE SHUTTER BRIGHTNESS AGC SENS-UP BLC D-WDR RETURN 1/60 - [...]

- 18 - White Balance T he White Balance function is used to control the “on-screen” color . 1. Move the arrow indicator to WHITE B AL on the SETUP menu screen using the Up and Down button. 2. Select the desired mode by using the Left or Right button. * T here ar e thr ee user selectable W hite Balance settings a vailable. SETUP LENS EXPOSURE WH[...]

- 19 - Day / Night Picture can be displayed in either color or black and white . 1. Select D A Y / NIGHT using the Up or Down button on the SETUP menu screen. 2. Select the desired mode using the Left and Right buttons . SETUP LENS EXPOSURE WHITE BAL DA Y / NIGHT 3DNR SPECIAL ADJUST RESET EXIT DC AT W COLOR ON * COLOR : T he picture is always displ[...]

- 20 - 3. Select the desired mode and set the v alues by using the Left or Right button . 3DNR is used to reduce the level of background noise in a low luminance environment. * DELA Y : T he range can be adjusted between 0 ~ 63. * S - LEVEL : T he start level can be adjusted between 0 ~ 100. * E - LEVEL : T he end level can be adjusted between 0 ~ [...]

- 21 - Special 1. When the SETUP menu screen is displayed, select SPECIAL using the Up and Down buttons . 2. Select one of the mode using the Up and Down button. 1. CAM TITLE : When input, the Camera ID is displayed on the monitor . 1-1) Move the arrow indicator to CAMERA ID using the Up or Down button on the SETUP menu screen. 1-2) Set to ON using[...]

- 22 - 3) Press the SETUP button. CAMERA TITLE CAMERA TITLE 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ▷ → ← ↑ ↓ ( ) - ㅡ _ □ / = & : ~ , . ← → CLR POS END 0123456789 ABCDEFGHIJKLM NOPQRSTUVWXYZ ▷ → ← ↑ ↓ ( ) - ㅡ _ □ / = & : ~ , . ← → CLR POS END NO TE * When CAMERA TITLE is set to OFF , the CAMERA TITLE is no[...]

- 23 - NO TE * In cases where the wrong Camera ID has been input........ Move the cursor to CLR and press SETUP button to erase characters from left to right, and repeat the above steps to input the characters again. 1-5) T o select the position where the Camera ID should be displayed on the screen. ① Move the cursor to POS and press the SET butt[...]

- 24 - ③ Select a new position by using the four directional button, Press the SET button to confirm the position. CAM1 2) D - EFFECT Move the cursor to D-EFFECT and press the SET button to set the other image functions . 2 -1) FREEZE : Image freezing or moving Image SPECIAL D-EFFECT 1. CAM TITLE OFF 2. D - EFFECT 3. MOTION OFF 4. PRIV ACY OFF 5.[...]

- 25 - 2 -2) MIRROR : Flip the image horizontally on the screen. 3) D - ZOOM: Digital zoom av ailable , range x1 ~ x32. P AN : The pan range can be controlled between -10 ~ + 100 TIL T : The tilt range can be controlled between -10 ~ + 100 * V -FLIP : Flip the image vertically on the screen. * RO T A TE : Flip the horizontal image vertically on the[...]

- 26 - NO TE * P AN and TIL T function should be available when using the digital zoom. 2-4) GAMMA : Desired gamma v alues can be adjusted between 0.05 ~ 1.00. 2-5) RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu. 3. MO TION 3-1) When the special menu screen is displayed, use the Up or Down botton to a[...]

- 27 - ⑤ Move the arrow indicator to select the SENSITIVITY to increase or decrease by using the Left / Right button between the level 0 ~ 40. RETURN : Move the arrow indicator to RETURN after complete the setup to return to SPECIAL menu. 4. PRIV ACY Hide an area you want to hide on the screen. 4-1). When the SPECIAL menu screen is displayed, pre[...]

- 28 - ③ Move the arrow indicator to WIDTH to mak e desired width of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100. ④ Move the arrow indicator to HEIGHT to mak e desired height of cells to increase or decrease by using the Left / Right button between the level 0 ~ 100. ⑤ Move the arrow indicator to t[...]

- 29 - 2. Select the desired mode by using Up or Down button.. SHARPNESS : Improving image clarity . T he level can be adjusted to obtain an improved image . However , when the level is set too high it can distort the image or cause noise . * Select BLUE or RED to increase or decrease the v alue of R-Gain(RED) and B-Gain(BLUE) while monitoring the [...]

- 30 - Trouble Shooting PR OBLEM Northing appears on the screen. ☞ Check the power cable, power supply output and video connection between the camera and monitor . ☞ Are the camera lens or the lens glass dirty? Clean the lens / glass with a soft clean cloth. ☞ Adjust the monitor controls, as required. ☞ If the camera is facing a very strong[...]

- 31 - POLICY, TERMS AND CONDITIONS OF SALE This statement of policy is in lieu of any other policy, expressed or implied, and no representative or person is authorized to assume for us any other liability or policy without our written consent. We cannot be held responsible for typographical errors. TERMS OF PAYMENT 2%, 10 days, net 30 from invoice[...]

200 New Highway Amityville, NY 1 1701 631-957-8700 1 800 645 5516 www .specotech.com[...]