SRS Labs 8953H manual

1 Projector 8953H User's Manual (detailed) Network Guide Thank you for purchasing this projector . This projector has the network function that brings you the following main features. ►Before using this product, be sure to read all manuals for this product. After reading them, store them in a safe place for future reference. WARNING • The [...]

2 Content Content   Content . . . . . . . . . . . . . . . . . . . 2 C a u t i o n ................... 3 1. Main functions . . . . . . . . . . . 5 1.1 Live Mode (Project images from PC) . . 5 1.2 Quick connection to your network . . 6 1.3 Conguring and controlling via a web browser . . 7 1.4 PC-LESS Presentation (Display the images stored i[...]

3 CA UTION Caution Caution [Restriction in terms of inserts or pulls storage media and wireless network card] Do not pull out the wireless network card while the power is on. Do not touch the SD card while being accessed. The storage media can be pulled out only while not being accessed. Perform the REMOVE MEDIA proc edure or turn the projector o f[...]

4 Caution 0560 ! The manufacturer (Gemtek) hereby declare that this equipment (the wireless network card), model SD-Link1 1g is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC.[...]

5 1. Main functions 1.1 Liv e Mode (Project ima ges from PC) 1. Main functions The MIU (Multi Information processing Unit) enables “Wireless presentation” by choosing Live Mode. The Live Mode gives you an ability to display the same image that is shown on the PC through the network by using an application program “Live Viewer 3” that is req[...]

6 1. Main functions 1.2 Quick connection to y our networ k The “Live Viewer 3” brings you very quick and simple connection to your network. The “Live Viewer 3” prepares some options for you to match your requirement. 1) Quick connection by the Passcode The Passcode is a code that includes SSID and IP address and other information that are r[...]

7 1. Main functions 1.3 Conguring and controlling via a web browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. Logon the network from the web browser and it offers the menus to congure the network settings, monitor the projector and so on. The W eb Remote Control, o[...]

8 1. Main functions 1.4 PC-LESS Presentation (Display the images stor ed in SD memor y card/USB memor y .) The MIU enables “PC-LESS Presentation” by choosing PC-LESS function. (Fig. 1.4) The PC-LESS function enables to display images that are stored in a storage media like SD memory card or USB memory . The “PC-LESS Presentation” has 4 type[...]

9 1. Main functions 1.4 PC-LESS Presentation (Display the images stored in SD memory card/USB memory .) (continued) • There are several naming limitations for the folders and les. (1) Alphanumeric and Japanese characters are supported if the language setting is Japanese. (2) Alphanumeric and Latin-1 characters are supported if the language set[...]

10 2. Equipment connection and network setting 2.1 R equired equipment pr eparation 2. Equipment connection and network setting The following equi pments are requir ed to connect th e projector to your PC through the network. ■ Common The projector: 1 unit, PC : 1 set *1 It is recommended to install the “Live Viewer 3” into the PC. ■ Depend[...]

11 2. Equipment connection and network setting 2.3 Manual network connection setting - W ir ed LAN - If you don’t use the “Live Viewer 3”, you need to set up your network connection manually . This section explains how to set it up manually . 2.3.1 Equipments connection Connect the projector and PC with a LAN cable. * Before connecting with a[...]

12 2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 7) Set IP address, subnet mask and default gateway for PC. Fig. 2.3.2.d “Internet Protocol (TCP/IP) Properties” window 5) Open “Local Area Connection Properties” window you use for network device. (Fig. 2.3.2.c) 6) Set used protoco[...]

13 2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) [About IP address] ■ Setting manually The Network address portion included in the IP address set into your PC should be common with projector ’s one. And the entire IP address in the PC should not be overlapped with other equipments in[...]

14 2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) 2) Click “Connections” tab and then click [LAN Settings] button to open “Local Area Network (LAN) settings”. (Fig. 2.3.3.c) Fig. 2.3.3.b “Internet Properties” window 2.3.3 “Inter net Option” setting 1) Click “Internet Opt[...]

15 2. Equipment connection and network setting 2.3 Manual network connection setting - Wired LAN - (continued) Fig. 2.3.4 “Logon menu” 2.3.4 Check connection Check PC and projector are connected properly here. If it is not connected, check cable connections and settings are properly or not. 1) Start browser in PC and specify following URL, then[...]

16 2. Equipment connection and network setting 2.4 Manual network connection setting –W ir eless LAN The projector and PC can communicate in both of Ad-Hoc and Infrastructure modes, using the designated wireless network card (option) on the projector . This section is intended to explain how to set up wireless LAN connection manually . 2.4.1 Prep[...]

17 2. Equipment connection and network setting 2.4.2 W ireless LAN connection set up Using wireless LAN utility for Windows XP standard. Wireless LAN initial settings for the projector is as follows. 2.4 Manual network connection setting –Wireless LAN (continued) Connection Control : Ad-Hoc SSID : wireless Channel : 1ch Encryption rating : None C[...]

18 2. Equipment connection and network setting 3) Set used protocol as “TCP/IP” and open TCP/IP property . Set IP address and other settings as same as wired LAN connection set up. (  12 ) 4) Open “Wireless Networks” tab. (Fig. 2.4.2.c) 2.4 Manual network connection setting –Wireless LAN (continued) 5) Add check mark for “Use Windows[...]

19 2. Equipment connection and network setting • If the default setting in the projector is used, set the data as above into your PC. If an access point is used or any encryption mode is used, it is required to set the data that is matched to your system. Refer to the manuals for your PC or wireless LAN adapter or access point. • If you want to[...]

20 3. Using the Live Mode 3. Using the Live Mode The section is intended to explain the process to use the projector in the Live Mode. The outline of the process is as follows. 1) Install “Live Viewer 3” (  23 ) The Quick Connection feature prepares some options to connect your network. Y ou can select one that meets your requirement. 2) Qui[...]

21 3. Using the Live Mode 3.1 Outline of the Liv e Mode The Live Mode can display PC’s image on screen in real time through either wired or wireless LAN. So, no signal cable connection is required. 3.1.1 Display mode In the Live Mode, there are two display modes, Single PC mode and Multi PC mode. 1) Single PC mode The projector displays images se[...]

22 3. Using the Live Mode 3.1 Outline of the Live Mode (continued) 3.1.2 Presenter mode In the Single PC mode, the projector can be occupied by one PC and can block an access from any other PC, if the Presenter mode is selected in the “Live Viewer 3”. While making your presentation, you don’t need to worry that the image on screen is unexpect[...]

23 3. Using the Live Mode 3.2 Install “Liv e Viewer 3” In order to use the Live Mode and Quick connection, you need to install the enclosed software, the “Live Viewer 3”, into all PCs that you want to connect to the projector through the network. 3.2.1 Minimum PC har dware and software requir ement • OS: Windows 2000 Professional (Service[...]

24 3. Using the Live Mode 3.2.2 Software Installation Procedure 1) T urn on the PC. 2) Shut down all applications. 3) Insert the accompanying CD-ROM into the PC's CD-ROM drive. • If the Welcome dialog doesn't appear , proceed as follows: (1) Click on the [Start] button on the toolbar and select the “Run”. (2) Enter E:softwaresetup[...]

25 3. Using the Live Mode 8) Conrm the program folder name. If “Projector T ools” is okay , press [Next] to continue. If not, enter the desired folder name and then press [Next] . 3.2.3 V er sion of the “Live Viewer ” software T o use the Live Mode, it is required to install the software, the “Live Viewer”, into the PC that is going [...]

26 3. Using the Live Mode 3.3 Quick connection to the netw or k The Live Mode prepares some options for the network connection. Y ou can choose one that meets to your system. The explanation here is based on the case that Windows XP is installed in your PC. 3.3.1 Star ting the “Live Viewer 3” Start the “Live Viewer 3” in your PC, taking one[...]

27 3. Using the Live Mode 3.3 Quick connection to the network (continued) 3.3.2 Selecting the network connection mode • If you select the wireless LAN, the wireless LAN adapters in your PC are shown in the list. • If the wired LAN is selected, the wired LAN adapters in your PC are shown. NO TE After starting the “Live Viewer 3”, the “Sele[...]

28 3. Using the Live Mode 3.3 Quick connection to the network (continued) • If you click [Y es] , the network access by the “Live Viewer 3” is temporally permitted by Windows rewall, until the “Live Viewer 3” is closed. • If any application software having the rewall function is installed into you PC, make the rewall function i[...]

29 3. Using the Live Mode 3.3 Quick connection to the network (continued) • If the DHCP is set on in the projector , the network connection between the projector and PC may not be established since IP address may be varied. If you like to use the My Connection, set the DHCP of f in the projector . • If no prole data is assigned to the My Con[...]

30 3. Using the Live Mode 3.3 Quick connection to the network (continued) n Are you sure you want to connect the selected projector? The message is appeared when the wireless adapter you selected is already used for another network connection. • T o connect, click [Y es] . Proceed to the 3.6 Conrm the connection to your destination . (  50 [...]

31 3. Using the Live Mode 3.3 Quick connection to the network (continued) 3.3.3 Connecting to the network There are some options to connect to the network. • Enter PassCode • Congure Manually • Select From List Select From List Before selecting this item, your PC and the projectors need to be connected to the same network. If the connectio[...]

32 3. Using the Live Mode 3.4 Passcode connection The unique Passcode system brings you very quick and simple connection to the network. The Passcode is a code that expresses the network setting in the projector . If you input the code in the “Live Viewer 3” in your PC, the network setting in the projector and PC can be matched and the connecti[...]

33 3. Using the Live Mode 3.4 Passcode connection (continued) 1) T urn on the projector , and make sure that the projector image is on screen. 2) Press the MENU button on the remote control or the ▲/▼/◄/► buttons on the projector to show the menu on screen. 3) Use the ▲/▼ cursor buttons to select the Advanced Menu, and use the ► curso[...]

34 • When entering the Passcode, capital and small letters are not distinguished. • If you are using any encryption code or your unique SSID or Subnet mask excluding ClassA and B and C, it is required to set the connection manually . If the manual setting screen is displayed, please follow the item 3.4.3 . NO TE 3.4 Passcode connection (continu[...]

35 3.4 Passcode connection (continued) 3. Using the Live Mode Windows prevented network conguration changes. Y ou may log in the Windows under User authority . Click [OK] , then the “Live Viewer 3” main menu is displayed even though the network is not established. Click on the main and go back to the item 3.3.3 Connecting to the network . ( [...]

36 3.4 Passcode connection (continued) The message comes up when the network connection mode you set in the PC does not match with the mode of the projector . Please verify your network conguration setting on the projector and PC. Click [Exit] , then the “Live Viewer 3” main menu is displayed even though the network is not established. Click[...]

37 1) Enter the following information that is set in the projector . *1 Direct connection between the projector and PC (AdHoc mode) 3. Using the Live Mode 3.4 Passcode connection (continued) SSID *2 : wireless (example) Encryption: WEP64bit (example) Encryption key *3 : ********** (example) Subnet mask *4 : 255.255.255.128 (example) After you input[...]

38 The projector connected to an access point by a LAN cable SSID : WirelessAccessPoint (example) Encryption: WEP64bit (example) Encryption key *2 : ********** (example) 2) The setting on the projector . *3 Enter the following information. 1) The setting on the access point. *1 Enter the following information. 3.4 Passcode connection (continued) 3.[...]

39 The projector connected to an access point by the wireless LAN 3.4 Passcode connection (continued) 3. Using the Live Mode SSID *2 : wireless (example) Encryption: WEP64bit (example) Encryption key *3 : ********** (example) Subnet mask *4 : 255.255.255.128 (example) 1) Enter the following information that is set in the projector . *1 *1 T o nd[...]

40 Wired LAN Subnet mask *1 : 255.255.255.128 (example) 2) Click [Connect] . 3) The network connection will be established. Proceed to the item 3.6 Conrm the connection to your destination . (  50 ) 1) Enter the following information for the projector . 3.4 Passcode connection (continued) 3. Using the Live Mode *1 In case the case you use the[...]

41 3.5 Manual conguration There are 3 options for the manual conguration. • Prole (  below ) • History (  42 ) • Congure Network Settings Manually (  43 ) • T o check the setting in a prole data, follow the process below . 1) Choose a prole data that you want to check. 2) Move the mouse cursor to the prole data[...]

42 • The number of the history record is maximum 10 for each network adapter . When the 1 1th data is stored, the oldest record among the 10 will be overwritten. • The data & time information in each history record is renewed when the network is connected by using the history record. • If the DHCP is set on in the projector , the network [...]

43 All setting for the network connection between the projector and PC is input manually . Select [Congure Network Settings Manually] . 3.5.3 Conguring manually 3.5 Manual conguration (continued) The information to be input manually is different, depending on how you want to connect the projector and PC. • Direct connection between the p[...]

44 1) Enter the following information that is set in the projector . *1 Direct connection between the projector and PC (AdHoc mode) 3.5 Manual conguration (continued) SSID: wireless (example) Encryption: WEP64bit (example) Encryption key *2 : ********** (example) Mode: AD-HOC 2) Click [Next] . 3) Enter the following information that is set in th[...]

45 The projector connected to an access point by a LAN cable 3.5 Manual conguration (continued) SSID: WirelessAccessPoint (example) Encryption: WEP64bit (example) Encryption key *2 : ********** (example) Mode: INFRASTRUCTURE 2) Click [Next] . 3) Enter the following information that is set in the projector . *3 IP address : 192.168.1.10 (example)[...]

46 The projector connected to an access point by the wireless LAN 3.5 Manual conguration (continued) 3. Using the Live Mode SSID: WirelessAccessPoint (example) Encryption: WEP64bit (example) Encryption key *2 : ********** (example) Mode: INFRASTRUCTURE 2) Click [Next] . 3) Enter the following information that is set in the projector . *3 IP addr[...]

47 Wired LAN 3.5 Manual conguration (continued) IP address : 192.168.1.10 (example) Subnet mask : 255.255.255.0 (example) 2) Click [Connect] . 3) The network connection will be established. Proceed to the item 3.6 Conrm the connection to your destination . (  50 ) 1) Enter the following information for the projector . *1 Consult to the net[...]

48 The reason is that the IP address set in the projector is the global address. Following the instruction by the network administrator , set the IP address and Subnet mask in the “Live Viewer 3”. After input these address, click [Connect] . n Automatic connection failed. If you want to erase the information you input, click [Reset] . The messa[...]

49 3.5 Manual conguration (continued) The message is appeared when the wireless adapter you selected is already used for another network connection. n Are you sure you want to connect the selected projector? 3. Using the Live Mode • T o connect, click [Y es] . Proceed to the 3.6 Conrm the connection to your destination . (  50 ) • Not [...]

50 3.6 Conr m the connection to your destination When the network connection is established, the “Connection to Project or successful” screen is displayed. Make sure that the right projector that you want to send your image to is selected, by checking the projector name and IP address shown in the screen. 3.6.1 Connection and transmission ?[...]

51 3.6 Conrm the connection to your destination (continued) The projector you want to send your images to is in the Slide show mode in the PC-LESS Presentation. n A Slideshow is currently running on the projector that you are trying to display to. The projector is not set to the Live Mode. n Are you sure you want to switch to Live Mode? The proj[...]

52 When the connection to the projector could not be established, an error message, “Network Connection not established”, will come up. Click [OK] then the “Live Viewer 3” main menu is displayed even though the network is not established. Click on the main menu to go back to the item 3.3.3 Connecting to the network . (  31 ) 3.6.2 Connec[...]

53 3.6 Conrm the connection to your destination (continued) 3.6.3 Setting the Liv e Mode 1) Click [LIVE MODE] button. (Refer to the item 4.1.1 1 Remote Control (  86 )) This section is intended to explain how to switch to the Live Mode in the MIU on the projector , by using the remote control or a web browser software. From Web Remote Control[...]

54 q e w 3.7 Star t the “Live Viewer 3” When you get the connection between your projector and PC, the “Live Viewer 3” main menu will be shown on the PC screen. On the main menu you can congure the settings and operate the functions to send your images to the projector in the Live Mode. 1) Menu T ype There are 2 type of the main menu, Ea[...]

55 3.7 Start the “Live V iewer 3” (continued) e Hold button The image on screen is temporally frozen. The last image before the button is clicked is remained on screen. Y ou can revise the image data on your PC without showing it on the projector ’s screen. r Display mode button (  57 ) The button switches the Single PC mode and Multi PC m[...]

56 3.7.2 Displaying the status 3.7 Start the “Live V iewer 3” (continued) 1) Indicator The indicator shows the following status. 2) Status Display in Multi PC mode The icon is displayed at the right end of the Display mode buttons. One of the following icons to inform which quarter screens are used will be shown. • The status display is refre[...]

57 3.7.3 Switching the display mode 3.7 Start the “Live V iewer 3” (continued) The “Live Viewer 3” has the Single PC mode and Multi PC mode. The modes can be switched on the main menu. 1) Click the button on the main menu. The buttons below are displayed. 2) Select from q to t buttons, and click it. q Switching to the Single PC mode : Y our[...]

58 3.7.4 Option menu 3.7 Start the “Live V iewer 3” (continued) Clicking the Option button displays the option menu on screen. q Optimize Performance The “Live Viewer 3” captures PC screen in JPEG data and sends the JPEG data to the projector . The “Live V iewer 3” has two options that have different compression rate of JPEG data. q e r[...]

59 3.7 Start the “Live V iewer 3” (continued) e Presenter Mode In the Single PC mode, the projector can be occupied by one PC and can block an access from any other PC, if the Presenter mode is selected in the “Live Viewer 3”. While making your presentation, you don’t need to worry that the image on screen is unexpectedly switched to an i[...]

60 3.8 Prole data The network setting to connect the projector and PC can be stored as a prole data. Once the data is stored, all you need to do is to select the data to connect to the network. It is recommended when the same network connection is often used. 3.8.1 Outline of Pr ole data The prole data is made on the Manual Congurati[...]

61 3. Using the Live Mode If necessary , the prole data can be edited on the Manual Conguration screen. (  41 ) 1) Select [Prole] , and select one of the data listed in the window . 2) Click [Edit] . 3) The “Edit prole” screen will come up. 4) Edit the information required to be revised. If you want to clear all information in th[...]

62 3.8.4 Registering My Connection 3.8 Prole data (continued) One of the prole data, which is often used, can be registered as the My Connection prole data. Once the data is registered, all you need to do is to select the My Connection to connect to the network. (  29 ) 1) Click [My Connection] . 2) The “Add My Connection” screen wi[...]

63 3. Using the Live Mode • If there are already 10 prole data, the check box cannot be checked. Please erase one of the existing prole data. • The prole name for the stored data is assigned by the “Live V iewer 3” automatically . The name will be shown at the right side of the check box. NO TE Also, you can register a prole dat[...]

64 4. Management with Web browser softw are Con guring and controlling the pr ojector via a we b browser Y ou can change the settings of or control the projector via a network by using a web browser from a PC that is connected to the same network. (  67 ) E-mail Aler ts The projector can automatically send an alert to specied e-mail addres[...]

65 4. Management with Web browser softw are 4.1 Conguring and controlling the projector via a we b browser Y ou can adjust or control the projector via a network from a web browser on a PC that is connected to the same network. • Internet Explorer 5.5 or later is required. • If JavaScript is disabled in your web browser conguration, you m[...]

66 4. Management with Web browser softw are When conguring or controlling the projector via a web browser , an ID and password are required. There are two types of IDs, Administrator ID and User ID. The following chart describes the differences between Administrator and User IDs. 4.1 Conguring and controlling the projector via a web browser ([...]

67 4. Management with Web browser softw are 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.1 Logon Refer to the follo wing for conguring or controlling th e projector via a web browser . 1) Enter “http://192.168.1.10/” into th e addres s bar of the web browser and press “Enter” key or click “ ” butto[...]

68 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.2 Network Infor mation All screen drawings in this manual are shown when you logon with the Administrator ID. Any functions that are available only for the Administrator will not be shown when you logon with the User ID. Refer to the table. (  66, 67 ) 4. Managem[...]

69 4. Management with Web browser softw are 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.3 Network Settings Displays and congures network settings. Item Description Network Mode Select Network mode “Wired” or “Wireless”. IP Conguration Congures network settings. DHCP ON Enables DHCP . DHCP OFF Di[...]

70 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are Item Description Wireless Mode Select “AD-HOC” or “Infrastructure”. CH (Communication channel) Select using channel between “1” and “1 1”. Speed (Communication speed) Select communication speed. Encryption Select [...]

71 4. Management with Web browser softw are 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.4 Port Settings Displays and congures communication port settings. Item Description Network Control Port1 (Port:23) Congures command control port 1 (Port:23). Port open Click [Enable] check box to use port 23. Authentic[...]

72 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.5 Mail Settings 4. Management with Web browser softw are Displays and congures e-mail addressing settings. Item Description Send mail Click [Enable] check box to use the e-mail function. Congure the conditions for sending e-mail under the Alert Settings. SMTP [...]

73 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.6 Aler t Settings Displays and congures failure & alert settings. Alert Item Description Cover Error The lamp cover has not been properly xed. Fan Error The cooling fan is not operating. Lamp Error The lamp does not light, and there is a possibility that i[...]

74 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are The Alert Items are shown below . Setting Item Description Alarm Time Congures the time to alert. (Only Lamp Time Alarm and Filter Time Alarm .) SNMP T rap Click [Enable] check box to enable SNMP T rap alerts. Send Mail Click [...]

75 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.7 Schedule Settings Displays and congures schedule settings. Item Description Daily Congures the daily schedule. Sunday Congures the Sunday schedule. Monday Congures the Monday schedule. T uesday Congures the T uesday schedule. Wednesday Congures t[...]

76 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are The schedule settings are shown below . Item Description Schedule Click [Enable] check box to enable the schedule. Date (Month/Day) Congures the month and date. This item appears only when Specic date (No. 1-5) is selected.[...]

77 4. Management with Web browser softw are 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.8 Date/Time Settings Displays and congures the date and time settings. Item Description Current Date Congures the current date in year/month/day format. Current Time Congures the current time in hour:minute:second fo[...]

78 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are Item Description Time difference Congures the time difference. Set the same time dif ference as the one set on your PC. If unsure, consult your IT manager . SNTP Click the [ON] check box to retrieve Date and T ime information [...]

79 4. Management with Web browser softw are 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.9 Security Settings Displays and congures passwords and other security settings. Item Description Administrator authority Congures the Administrator ID and password. Administrator ID Congures the Administrator ID. Th[...]

80 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are Click [Apply ] button to save the settings. • Only numbers ‘0-9’ and alphabet ‘a-z’, ‘A-Z’ can be used. NO TE Item Description Network Control Congures the Authentication password for the command control. Authent[...]

81 4. Management with Web browser softw are 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.10 Projector Contr ol Controls the projector . Item Description Main Power T urns the power on/off. Input Source Selects the input source. Picture Mode Selects the picture mode setting. Blank On/Off T urns Blank on/off. Mute [...]

82 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are Item Description Image Aspect Selects the aspect setting. Over Scan Adjusts the over scan setting. V Position Adjusts the vertical position. H Position Adjusts the horizontal position. H Phase Adjusts the horizontal phase. H Size[...]

83 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are Item Description Audio V olume Adjusts the volume setting. T reble Adjust the T reble setting. Bass Adjusts the Bass setting. SRS WOW Selects the SRS WOW setting. Speaker T urns the built-in speaker on/off. Audio-RGB1 Assigns the[...]

84 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are Item Description Option Auto Search T urns the automatic signal search function on/off. Auto Keystone T urns the automatic keystone distortion correction function on/off. Auto on T urns the auto on function on/off. Auto off Con?[...]

85 4.1 Conguring and controlling the projector via a web browser (Continued) The Service item in the Projector Control menu is shown only when you logon with the Administrator ID. The items shown in the table below can be performed using the Projector Control menu. Click [Quit Presenter Mode] . 4. Management with Web browser softw are Item Descr[...]

86 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.11 R emote Control Y ou can use your Web browser to control the projector . • Do not attempt to control the projector with the projector ’s remote control and via your W eb browser at the same time. It may cause some operational errors in the projector . 4. Mana[...]

87 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are The functions on PC-LESS PRESENT A TION menu are assigned to the Web Remote Control screen. Item Description LIVE MODE Selecting this item sets the projector onto the “Live Mode”. THUMBNAIL Selecting this item sets the projec[...]

88 4.1 Conguring and controlling the projector via a web browser (Continued) 4.1.12 Projector Status 4. Management with Web browser softw are Displays and congures the current projector status. Item Description Error Status Displays the current error status Lamp Time Displays the usage time for the current lamp. Filter Time Displays the usage[...]

89 4.1 Conguring and controlling the projector via a web browser (Continued) 4. Management with Web browser softw are 4.1.13 Network Restar t Restarts the projector ’s network connection. Item Description Restart Restarts the projector ’s network connection in order to activate new conguration settings. • Restarting requires you to re-l[...]

90 4. Management with Web browser softw are 4.2 E-mail Aler ts The projector can automatically send an alert message to the specied e-mail addresses when the projector detects a certain condition that is requiring maintenance or detected an error . • Up to ve e-mail addresses can be specied. • The projector may be not able to send e-ma[...]

91 4.2 E-mail Alerts (Continued) 4. Management with Web browser softw are 8) Click [Alert Settings] on the main menu to congure the E-mail Alerts settings. 9) Sele ct a nd c on gure eac h al ert ite m. R efe r to the it em 4.1.6 Alert Setting (  73 ) for further information. 10) Click [Apply] button to save the settings. Failure/W arning e[...]

92 4. Management with Web browser softw are 4.3 Projector Mana gement using SNMP The SNMP (Simple Network Management Protocol) enables to manage the projector information, which is a failure or warning status, from the computer on the network. The SNMP management software will be required on the computer to use this function. • It is recommended [...]

93 4. Management with Web browser softw are 4.4 Ev ent Scheduling The scheduling function enables to setup scheduled events including power on / power off. It enables to be “self-management” projector . • Y ou can schedule the following control events: Power ON/OFF , Input Source and T ransferred Image Display . • The power on / of f event [...]

94 4. Management with Web browser softw are • In Standby mode the power indicator will ash green for approx. 3 seconds when at least 1 “Power ON” schedule is saved. • When the schedule function is used, the power cord must be connected to the projector and the outlet and the power switch must be turned on, [ | ]. The schedule function do[...]

95 4. Management with Web browser softw are Date/Time Settings (  77 ) 4.4 Event Scheduling (Continued) • The battery for the built in clock may be dead if the clock loses time even when the date and time have been set correctly . Replace the battery by following the instructions on replacing the battery . (  Internal clock battery in the U[...]

96 4. Management with Web browser softw are 4.5 MY IMAGE (Still Image T r ansf er) Display The projector can display a still image in an SD memory card or USB memory that is transferred via the network. (Fig. 4.5) • Supported le types are JPEG, Bitmap and PNG. • It is possible to allocate the image le up to 4 in the maximum. • The image[...]

97 4. Management with Web browser softw are 4.6 Command Control via the Networ k Y ou can congure and control the projector via the network using RS-232C commands. Communication P or t The following two ports are assigned for the command control. Command Control Settings (  71 ) 4) Click [Enable] check box to open Network Control Port1 (Port:[...]

98 4. Management with Web browser softw are 4.6 Command Control via the Network (Continued) When the authentication setting is enabled, the following settings are required. (  79 ) 7) Click [Security Settings] on the main menu. 8) Click [Network Control] and enter the desired authentication password. * See NOTE. 9) Click [Apply] button to save t[...]

99 4. Management with Web browser softw are 4.6 Command Control via the Network (Continued) Command F or ma t Command formats differ among the dif ferent communication ports. ● TCP #23 Y ou can use the RS-232C commands without any changes. The reply data format is the same as the RS-232C commands. However , the following reply will be sent back i[...]

100 R eply Data for mat The connection ID (the data is same as the connection ID data on the sending data format) is attached to the RS-232C commands reply data. <ACK reply> Reply Connection ID 0x06 1 byte <NAK reply> Reply Connection ID 0x15 1 byte <Error reply> Reply Error code Connection ID 0x1C 2 bytes 1 byte <Data reply>[...]

101 4. Management with Web browser softw are 4.6 Command Control via the Network (Continued) Automa tic Connection Break The TCP connection will be automatically disconnected after there is no communication for 30 seconds after being established. The projector does not accept commands without authentication success when authentication is enabled. T[...]

102 5. PC-LESS Presentation 5. PC-LESS Presentation The PC-LESS Presentation reads image data from storage media inserted into SD CARD slot or AUX I/O port and displays the image on the following modes. The PC-LESS Presentation can be operated on the OSD menu in the projector screen or via a web browser software in your PC connected to the projecto[...]

103 5.1 Outline of the PC-LESS Presentation (continued) 5. PC-LESS Presentation Directory T ree Mode [Supported storage media] • SD memory card • USB memory (USB memory type, USB hard disk and USB card reader type) • USB memory reader (adapter) that has more than 1 USB slot is not supported (if the adapter is acknowledged as multiple devices [...]

104 5. PC-LESS Presentation The Thumbnail mode displays the images stored in an SD or USB storage media in thumbnail screen. Maximum 12 images are displayed in a screen. If you wish, you can jump into the Full Screen Mode or Slide Show mode, after you select some images in the Thumbnail mode. 5.2 T humbnail mode Fig. 5.2 Thumbnail Mode 1) Save JEPG[...]

105 5.2 Thumbnail mode (continued) 5. PC-LESS Presentation 6) Use the ▲/▼ cursor buttons to select the PC-LESS PRESENT A TION, and push the ► cursor button. 7) Use the ▲/▼ cursor buttons to select the THUMBNAIL, and push the ► cursor button to perform it. The picture in Fig. 5.2 will be on screen. 1) Save JEPG or other supported les [...]

106 Y ou can control the images in the thumbnail screen with the remote control or keypad or a web browser software. The following functions can be supported while the thumbnail is displayed. 5.2.2 Operating by buttons or k eys 5.2 Thumbnail mode (continued) 5. PC-LESS Presentation Button operation Functions The remote control The keypad on the pro[...]

107 5.2.3 Operation on the T humbnail menu 5.2 Thumbnail mode (continued) 5. PC-LESS Presentation At the right side of the Thumbnail screen, you can nd the Thumbnail menu. 1) PC-LESS PRESENT A TION MENU: Move the cursor to the PC-LESS PRESENT A TION menu, and push the ► cursor button on the remote control or projector , or [RIGHT] on the Web R[...]

108 Fig. 5.3 Full Screen Mode Full screen display The Full Screen Mode (Fig. 5.3) shows a full display image. T o make full screen display , press the ENTER button on remote control or the INPUT button on Keypad or click [ENTER] button in the Web Remote Control when the image le is selected on the Thumbnail Mode or Directory Tree V iew . 5.3 Ful[...]

109 5.3 Full Screen Mode (continued) 5. PC-LESS Presentation Y ou can display the image le with your desired size. 1) Select the DISPLA Y SIZE in PC-LESS PRESENT A TION menu. 3) Then DISPLA Y SIZE menu appears. 4) Select your desired DISPLA Y SIZE. • REAL : Displays the image at original size. Displays the image at the center of screen if orig[...]

1 10 5.4 Slide Show Mode Fig. 5.4 Slide Show Mode The following operations can be accessible while the Slide show is displayed. * These operations are not accessible while the projector OSD menu is displayed. • It is impossible to change the input port by the INPUT button if the THUMBNAIL, SLIDE SHOW , or DIRECTOR Y is displayed. • Display the [...]

111 5.4 Slide Show Mode (continued) 5. PC-LESS Presentation Y ou can play the Slide show at your desired conguration. Congure the SLIDE SHOW items in THUMBNAIL. 1) ST AR T # : Set the beginning number of the Slide show . 2) STOP # : Set the end number of the Slide show . 3) INTERV AL : Set the interval time of the Slide show . 4) MODE : Selec[...]

1 12 5.5 Director y T r ee View Y ou can also display the directory by clicking [DIRECTOR Y] button in the Web Remote Control. The Directory T ree View (Fig. 5.5) displays all folders and les (includes un- supported format le) in the memory card as a tree view . The preview image is shown on the top left corner on the directory tree view . In[...]

1 13 The following operations can be accessible while directory is displayed. * These operations are not accessible while projector OSD menu is displayed. • It is not possible to change the input port by INPUT button when THUMBNAIL, SLIDE SHOW , or DIRECTOR Y is displayed. • Display the projector OSD menu before changing the input port . • On[...]

1 14 5. PC-LESS Presentation 5.5 Directory Tree V iew (continued) [File information display] In the Directory T ree View screen, the following information is shown as the File information. Picture le (still picture) - File format (“JPEG Image”, “PNG Image” or “BMP Image”) - T ime stamp (When le is created) - File size (Size of Fil[...]

1 15 Error message is displayed at a specic condition while “PC-LESS Presentation” mode. It appears at the bottom and the gray area of screen. Fig. 5.6 “PC-LESS Presentation” error message “PC-LESS Presentation” error message list Error message Error content Display mode File is not found. Displayable file does not exist. The Full Sc[...]

1 16 5.7 Playlist 5. PC-LESS Presentation The Playlist is a DOS format text le, which decides the order of displayed still image les or moving image les in the thumbnail or the slide show . The playlist le name is “imagelistdir .txt” . It is created in each folder when the PC-LESS Presentation is displayed. The timing of playlist cr[...]

1 17 6. T roubleshooting 6. T r oubleshooting Problem Likely Cause Things to Check Reference Page Number No image The projector is not turned on. Is the projector ’s lamp on? *17 The projector’s input source isn’t switched to MIU. Is the projector switched to MIU? *18 Wireless / Wired Live Mode The projector that you want to connect to is now[...]

1 18 Problem Likely Cause Things to Check Reference Page Number Wireless / Wired Live Mode The projected image is rather slow compared to that of the PC The projector isn’t capable of relaying dynamic images such as PowerPoint® animation at full speed. Switching the priority to ‘T ransmission Speed’ under the options menu may help to improve[...]

1 19 Problem Likely Cause Things to Check Reference Page Number PC-LESS No information is shown after mass storage device is set on Thumbnail or Directory mode. The mode setting is not renewed after the device is set. Select either Thumbnail mode or Directory mode again, showing PC-LESS Presentation menu. 104, 1 12 Wireless Can’t communicate The [...]

120 Item Specifications File format JPEG, PNG, Bitmap and MPEG4 Control software Dedicated PC application and W eb browser Corresponding protocol TCP/IP , DHCP client and HTTP server Network Wireless LAN (IEEE802.1 1b/g) (Ad-Hoc and Infrastructure modes) Ethernet (100Base-TX/10Base-T) Security WEP (64/128bit), WP A-PSK/PSK2 (TKIP/AES), SSID PC appl[...]

121 8. Warr anty and after-sales ser vice 8. W arranty and after-sales service If a problem occurs with the equipment, please read “6. T roubleshooting” (  1 17 ) section rst and review all suggested check points. After that, please contact your dealer or service company , if you still have the problem. They will tell you what warranty co[...]