Star NX-1001 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130

Ir a la página of

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Star NX-1001. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Star NX-1001 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Star NX-1001 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Star NX-1001, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Star NX-1001 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Star NX-1001
- nombre de fabricante y año de fabricación del dispositivo Star NX-1001
- condiciones de uso, configuración y mantenimiento del dispositivo Star NX-1001
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Star NX-1001 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Star NX-1001 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Star en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Star NX-1001, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Star NX-1001, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Star NX-1001. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    USERS MANUAL NX- 1 00 1 MUL TI-FONT DOT MA TRIX PRINTER 80820471[...]

  • Página 2

    NX-1001 M U M N I F S[...]

  • Página 3

    F C o C R F r I n S T e q h b t a f t c with the limits foraclass B digital device, ptsrstrant to Part 15 of FCC Rules. These limits are d t p r p a h in t i a r e i n T e q g u a c r r f e a if n a u i a c w t i n m c h i t r cw r H o t i n g u i n w n o a p in s I e q d c h i n t r o r w c b d e b t u d e q o a o t u i e t t t c t in t b o o m o [...]

  • Página 4

    H T U T M T m i o i n c T l h t m t b u o y p y a u t r t c 1 t 3 T r c m b t a a r g f p o p e I a a d o k o t o o c ( i i a y k a h n T c a a f C 1 S u t p T c e h t g t p u a s R t c b y d a e C 2 — C p o T a a n o c o t f p w p v f r t p h p m a f s A g s u r t c a t o t v p i i t f o h t p w C 3 — D s s T c e h t s t D s t m s s o t p C 4 [...]

  • Página 5

    C 6 — M a y p S t P o P f o c r u M i c u t m p c o o m w h i c a f h a t t h y u y p w s s S v a P a s w a M B i w h a i s h a a s p i t l t d e t c a o t p C 7 — T r a m T s g a c o t c i y n w i t e w I a i d o s r m o p y c c o y I i n h a c s m C a q s e i y a u o y a t c o a m a o s o C 8 — S p T s g t s p o y p C 9 — C sets T c g t d[...]

  • Página 6

    F T P T p i a c m p w f b w a f c o o f m i a e p f a p c I s t I p c a c s e i t p j a a y c c g b t , g S o i m f a t f . E s s S i i c w t E a I p i w w a s t s t p T i m w a g p s p a i s p ● E a C u n i d a b t p i a f w y p t b o t c p T f b c o i c t p a s v o f t i m i ● E c a m T r c c b r i s t ph i a f m . V p h S s f f a m f ( t t a[...]

  • Página 7

    TABLE OF CONTENTS C 1 S U T P L t P U a I C t c c P n o t p S U M t p k I t r c C L S S A l M l L a P F F L t p P p P u A t P G C 2 C P O B a I O L b P F b P b F b P F S t m L t m S i p p S i p f S i p p a f H e d S C o F F f P P T o f F m R m C t b 1 1 2 2 3 4 4 4 7 8 8 1 1 1 1 1 1 17 17 18 19 19 2 2 2 2 2 2 2 2 2 2 2 2 2 2 2[...]

  • Página 8

    C 3 D S S L o t D S F o t D S C 4 P C C F C C C S C C S a P C V P C H P C G C D C C O P C C C 5 D C D Y O D C D t a d A t c d S p D Y O N C C 6 M A Y P I A S w Y P E P C P r t P w D C p r w B H t p w C 7 T R A M T r P s P P f M a R t P H 2 2 30 3 3 3 4 4 5 5 6 6 6 6 7 7 7 7 7 7 7 8 8 8 8 8 9 9 9 9 9[...]

  • Página 9

    I C 8 S P C 9 C S S C S I n C S I C S # I C S # I S C S I C S 9 1 1 1 1 1 1 1 1[...]

  • Página 10

    c 1 SET71NG UP THE PRINTER S c i C 1 i — . ● ✎ ✎ ✎ ● L t p U a i ( o p S u a c L s s L a p f f A t p g L T P B y s u a s u y p m s t y h a s p o w t l i B “ s p w m ● ● ● ✎ ● ● ✎ ● ✎  A f l s w i f v A f e h ( a d s h e A f e h A f e d S i w “ e D n c i t t s c a a l n o a s a a r M s t l v i t v s o t p i d p T[...]

  • Página 11

    I U A I Check the carton contents N u t c o t s c a c e i i t b a F 1 t m s t y h e ( s b f i I a o t i a m c y s F l C t m s y h a f i 1 Printer, 2 P g 3 P k 4 R c a a 5 U m[...]

  • Página 12

    T o a c w y m h o w y a ● S e c ( ● A s f ( Parts name of the printer M a e i o t p N t l o t f i p i F 1 ~ I T c R c / I ‘owerswitch .O n F 7 T p r e x p B l o a c t p b w h t p a t p R l r t p T l m b b f s s a u f f f T c p t p h a o i p R c p t s f m E s f i ss o p C p c v p f P s t p o a o I c f c t c t t p[...]

  • Página 13

    I S U P t p i t d l a r a p m f i t t c T p m i i t p d t t p w i t Y w w t k a t p m a a w t p c i c y h t m t p t a n l Mount the platen knob T p k i p i a ~ o t w f p m w h y p i t c B s t r t k f t p a M t k o t p s w i o t r s o t p R t k o t s b p t k f i p o P k F 1 M o t p k Install the ribbon cartridge R t t c b l t f ( t t g o e s a p t c[...]

  • Página 14

    F 1 R e tt c 1 T t t k c o o t r c t t t r i i i s 2 G t r b t p h a t p m c t t s o t c h f i t s o t c i F T I n t r c a 5[...]

  • Página 15

    3. T r s p b t p a t s ( F 1 Print h s n F 1 P t r L t p h a p h s T r t t c i t t i t s o t p c S t f e d t c t c L t t c c d n o T c k o d a d a r t p o s O t c o t c t r o m a a 6[...]

  • Página 16

    Connection C t p t y c u a s p i c O a P o P c t m t y u t 2 D c a t c e a t A 3 c n a t p e T c o t p c i g i C 8 s y n a c f c t a c I y n t c t a s p u t o S c o S I C ‘% * ,0- Interface cable F 1 C o t i n c P t p i a s o H D N t o t p s a t f o t p y[...]

  • Página 17

    L S S T s w t y t t p f l s s o p I y a u t o a s f ( r t t A i n b Automatic loading S s c b l m w t p o o a w t p o W w s t e w w a l 1 P t p g i p b i t t l o t b o t a i t s o t r c o t p F i T M o t p g f s s[...]

  • Página 18

    I 2 3. 4. 5. M s t t r l i d I f p i a m i t p p t P F b w h t F b t p t p i t o s t m t r l d A t p g t m t s o p y w b u R t p w s s d f t l e o t c T t p u t s l a t f o t p T p w b i t t i n p i f T o P i w a f t c t P a s s b t g p t s o w y w t p t t b o t p G p t p d i t g u y f i s F 7 L o a s s 6 M t b l f W t b o t p f t p a u 7 M t b l b[...]

  • Página 19

    I Manual loading I i a p t l p m w t p p i o T p r i 1 2. 3. 4 5 6 7 8 P t p g i p b i t t l o t b o t a i t s o t m c o t p C t p p i o a t r l i d O t t c t m t b l o t p t o t p b A t p g t m t s o p y w b u R t p w s s d f t l e o t c P a s s b t g p t s o w y w t p t t b o t p G p t p d i t g u y f i s T t p k c u t f e o t p c o t u t t c I t[...]

  • Página 20

    L A P F F F f h h a t s a p b t s T a a c s f p f o j p “ c p T p a f u t 1 w T s w t y t t p f l p a u f f Loading the paper 1 2 3 4 5 P a s o f p b a a l o p b t p T t p p O P t r l f T h t e o r t p f t p r a e t t f R & pg a p i a f t m R t r c u t t g o e s a p b a s i F 1 F 1 R e t r c[...]

  • Página 21

    6 W t s c o m t p b a h w t p o t s 7 A t s o t s b s t a t b u t c l a t b o e s t r a l t i p o W t l i d t s i r a w i i u t s i l F 1 M t f p o t s p 8. 9. N c t s c a m s t t p h a a w t p o t s I t a n a p r y w h p w p f p r i t a j o t p T o t p u t s l a t f o t T p w b i t t p i n y f l T i a c b t o P i f 1 M t b l f W t b o t p f t p a [...]

  • Página 22

    1 M t p g i t h p s i F 1 s t i w s t p f t u p F 1 M o t p g f f f 1[...]

  • Página 23

    Paper parking A l f p y d n h t u i w y w t p o a s s T p w “ i f y i y f t p r b 1 2 3. 4 5 6. 7, T b p p s w p O f p l i p p a t r l u P t O L b o t c p t s t p o O L i w t o T o t p f a t l p l n m t a h a p s a t t c I n p t P F b t f p f u a p i l j a t t c a t t P t F b a h i d W h t F b d p t P F b o t c p T p w a u f t f f b u t p i c o f[...]

  • Página 24

    I A T P G T d b t ph a t p c b a t a c d p t T m t a r t t c T a l i l n t l s o t p b P t a l t y w t g p i a f y n t g T a f p a y c f t l c i e p T s p f t t i t o m c u f s s o p T d p u y g t b p r I F 1 A d f d i t h o p T f t p t r l p f e p t a a r Paper Type Weight (g/mz) Thickness (mm) Recommended (Each paper) (Total) Lever position 52-82[...]

  • Página 25

    1[...]

  • Página 26

    c CONTROL PANEL OPERATIONS T c p b c b p i t p t o t i b t n O f c b a b h t b d w y t t p p o o b p t c p b i c T c e a t b a i f ● ✎ ● ● ✎ ● ● ● ✎ ✎ P p F p ( a s f a r P f f S t t o p S t p p S a f P t p P s f c t p p a f s P a h e d C t p b B A I T p i e w f b o t c p F r t l t a O L P F P a F T f i a b g t t b a i o t c p I[...]

  • Página 27

    ONLINE button T O L b s t p o a o T s c e t y p t b W t p i o i c r a p d f t c W t p i o i s p a s t c a s i n t i c a d T p p u i t o s i p i l I p i n l t p p u o w t P i f W y l p t P i s f b t p r o T s p y m p t O L b g o l Y w w t p t O L b a ● B aa a o p o T o p b o o i t o s P t O L b t g o A p t p o p t O L b a t g b o ● T p d p I y p[...]

  • Página 28

    PAPER FEED button I y p t b w o t p w f f I y h t b d t p w p c l f I y a p t O L b w y a l t p w f a u t t t o t n p T i e l I y p t b w o t w a s a c t Q m W i t Q m t p w p s s b a a r n l PITCH button T b a y t s t p p R t t p m b o f y t d t S p o t b w i l ( s t f o i o Pitch Indicator(s) P E C p C e P p E p C p p r C e p r 10CPI 12CPI 10CPI,[...]

  • Página 29

    1 FONT button T b s t f t b p D f i a s a p o T c t o o t N ( l q f s t p o t p t F b r u t i b t d s i T s c i t f i o Font Indicator(s) D DRAFT C COURIER S SANSERIF O ORATOR T O f i u i t w F i i l ( t t o f w m i a g c f l a o t r h v i Y w n a l e l s w O i u S t a t v o t O f o p s c i p o l o l t o p l l b w d e T o f d n h a s o L w a p a l [...]

  • Página 30

    P F I a t t n f a t c p b h s f t o i y h t d w s p o [ J,, S i p f S i p p F 2 P o f u o c p Short test mode I t p i t o w t O L b i p t p w e t s s m T p w s p a s a t O L b i r a w p t v n o t p R f b s l o t c s E l w b o b o c f t o b i T f r w b s l F 2 ~ “ a I J T l”-’abcdefghi jklmno ! #! #*y.&, ( ) *+. -0 /~~~3456789: : <=, ,[...]

  • Página 31

    Long test mode I t p i t o w t P F b i p t p w e t l s m T p w s p a s a t P F b i r a w p t v n o t p r R a t c s o t D s f b t w c s p i e f a p a T t c e s y m t t p o t s i S t s o t f w o t c i i r t t p i l w t w p p t a d t t p h a p I a t t n o l p i c o m t c b a o a s s s f p i r e f t t Stay in panel pitch B h t P b d p t p p c o b s f t[...]

  • Página 32

    I Hexadecimal dump T f i u f p w a d p p g a w t s t a c t p i r ( c c t c t p i I t m a d r w b p i a h d f r t t c c b a o a c c T m i a w t f p 1 2. 3. W h b t P F a P b d t p O A b t w b h S p I p o t u p y w g a f d s e w d t p r E l p s c t h c t t l a p c h p o t r A t e o t h d s t p o w t O L b T i n t t i l T f B p i a s t y c r i h m 1 F[...]

  • Página 33

    M B h a n q t s t F t I w g y a p s t F 2 (:)S 1)9 (:)0 (:)Ei (>C CID (:IA I:)E 17 18 19 IEI IC ID IE IF 28 29 2A 2EI 2C 2D 2E 2F 38 39 WI 3B 3C ID 3E .3F 48 47 4A 48 4C 4D 4E 4F 58 59 5!4 5EI 3C 5D 5E 5F 6S 69 66 6B 6C 6D 6E 6F 78 79 7(J 7Ei 7C 7D 7E 7F S8 B9 8A S!3 SC SD SE SF 98 99 9(4 9EI ?C 9D 9E 9F fM3 AY M AE+ AC AD AE AF’ B8 E19 HA i3E[...]

  • Página 34

    S C F S a d f c b a b p t c p b i c o R m m F 2 S c o f u o m p Form feed I y a u s s t o e t c p I y a u f f i f t t t o t n p 1 2 3 P t O L b t s t p o P t P F b a h i d T p w s p f s l f W h t P F b d p t O L b t r b b a t s t T p w s e t c p 25[...]

  • Página 35

    I Paper Parking T p f t p b I p t f f a t b o t p s t y c s t s f ( m t r l t t d p B p f f t o a b t l p l l ( l t i l t a M p s a t t c 1 P t O L b t s t p o 2 P t FONT b a h i d 3 W h t F O p t P F b T p w b f o b Top of form W y p o t p t t p i a s t t c p I t i n w y w t t o t p t b y c c t t o p a f 1 2 3. 4. p t O L b t s t p o M t p t t d t[...]

  • Página 36

    Reverse micro-feed Y c a f t p i s i i r t r t a h p o t s p N W f f d n t t r t a p p T p f m c i t p a c a j 1 P t O L b t s t p o 2 P t O LINE b a a h i d 3 W h t O L b d p t P b T p w s m b i a s o s s W y w t s r b b Clearing the buffer W D s 1 i O t p s r d i a l m b T c a p w y w t a a p j a r t p m b m d i i b t i h a p a t u d m b c o b r [...]

  • Página 37

    ?a[...]

  • Página 38

    I c 3 DIP SWITCH SET77NGS T b o D ( I P s i t p i u f v f T c e w t D s a l a h t u t L T D S W y r t printer’s cover a l i y w s o t g b a t b o t p t g o s w s m D a D T a t p D s D h e s n 1 t 1 f l t r D h f s n 2 t 2 — D S 1 D S 2 F i D s w F a s t O p i t t b o t p a t O p i t t f T s a D s u a b p o o s i t m t s t t O o O p T p p s b o [...]

  • Página 39

    F O T D S T p i f a w a D s i t O p T a t s s B c t s y c a v p f u t m y r e T f q w h y c t p s Switch Function ON OFF 1-1 Printer mode Standard I 1 U o R B D 1 A L N Y 1 A s f I A 1 P d E D 1 O l c S c L c 1 P l ( b 1 C s ( m ‘ I 2 C s ( m ‘ ‘ S # 2 1----1 2 I n c s 2 S l Doyou w S t m c w y c a s I s m t p o l t E L I I m i o l t I P I T [...]

  • Página 40

    Switch 1-3: Do y w a a l f I y l t s a t O p a s l c i r f y c t o a l f I y m t s t t O p t p p b a c m a l f e t i r a c c M c s s a l f c o b a c m a l f a t e o e l s t s s b l O I y g d l s w y e s s o i l o e o t c t s o t s Switch 1-4: A y g t u t a s f ( I o t u t a s f m t s t t O p O l i O Switch 1-5: D y o s a o t p o t k p L t s O e w y[...]

  • Página 41

    I Switch 2-1: The a o t s d o t m c w s 1 I y s s m d y w i o g c h Set this s O t p i i t s c s I y l t s i t O p i p o i y w g t g c h i n c a m s o I c h s # S C 9 c c 1 t 2 I y s I m d y w I c s # o O s c s # w i f c w a 8 i ( m c k O s c s # f c w a 7 i Switches 2 t 2 D y w a i c s I n c s d i t a o 1 c c S t c t a t b o t m W t D s y c s o o [...]

  • Página 42

    c 4 PRINTER CONTROL COMMANDS T p h t e m S m a I m I s m t p e t f o t E L I I m t p e t I P I A c c a i a a s o t e T e i c b m o D s 1 W O t p w b i s m a w O t p w b i I e m ( C 3 I i n p t c t e m b m o s c o t f c p ‘ hi s t p c c S c a c t b t s a I I t d o t c m a c w b c b f T n o e c i f b a t l t o b I M I A D H std. < “X” “ 27[...]

  • Página 43

    F C C Select draft quality characters I M I A D H B “ “ “ “ “F’ “ “ “ “ “9” 4 7 2 s . < “X” “ 27120 48 IB 78 30 < “ <o> 2 0 IB 78 fXI —. .- 1 1 I < “ “ 27 73 48 IB 49 30 < > “ < I 27 73 0 1 C f n e t o I i F b w p d p Select draft elite characters I M I A D H 1 c “ “ I I 27 73 49 I[...]

  • Página 44

    Select NLC? font M A D H B < “k” n 2 n IB 6B n S a N f a t t v o n I d m t c r d a t e l w N i s I i t F b w p d p n F n O C ( v 1 S 7 O w s c 8 O w l Select Courier characters M A D / H B “ “ “ “ “F’ “ “ “)” ( ) “ 4 7 4 4 ] 22 223 C t t C N f I i t F b w p d p Select Sanserif characters M A D H B “ “ “ “ “F?[...]

  • Página 45

    Select Orator characters with lower case M A D H B “ “ “ “ “F’ “ “ “ “ ( ) “ 40 40 70 41 41 58 28 28 4B 29 29 38 C t t O w lower case NLQ font. Ignored if the F b w p d p Select italic characters M A D H std. < “ 27 52 IB 34 C s c t b p i i Select NLQ italic characters M A D H IBM I <Esc> “ < 27 72 11 I IB 49 O[...]

  • Página 46

    Cancel emphasized printing M A D H Both 43SC> “F* 27 70 I 4 C e p Double-strike printing M A D H B @ y 27 71 IB 47 C s c t b p i d m w a s v p m i b c a t o h s F b p u o d i r i N m a c u o e a d i n m i d m D o c b u w s o s Cancel double-strike printing M A D H Both &SC> “H” 27 72 IB 48 C d o p Start underlining M A D H B CESb ?[...]

  • Página 47

    Stop underlining M A D H B < “ “ 27 45 48 IB 2D 30 < “ < 27 45 0 16 20 m S u n Start overlining M A D H I < “ - . 27 95 49 IB 5F 31 < “ “ < 27 95 1 IB 5F 01 C s c t b o S s b h o t a n o Stop overlining M A D H I < , - “ 27 35 43 IB 5F 30 < ‘ < 27 95 0 IB 5F 00 S o v Superscript M A D H B < “ “ 27 3[...]

  • Página 48

    Cancel superscript or subscript M A D H B dzsc> ‘“r’ 27 64 IB 64 S p s o s a R t n p C S C Select standard character set M A D H Both CEsc> “t” “o” 2 4 IB 74 30 CEsc> “t” co> 2 0 IB 74 00 S t s c s T i t p d i S m i D s 2 i O Select IBM character set M A D H B < “ “ 2 49 10 74 31 < “ < 2 1 IB 74 01 S a I[...]

  • Página 49

    Select international character set M A D H s c “ n 27 S2 n IB 52 n S e a i n c s a t t v o n n C s O U 1 F 2 G 3 E 4 D I 5 S 6 I n Character set 7 Spain I 8 Japan 9 Norway 10 Denmark II 11 Spain II 12 Latin America 13 Dcmnark/Norway T f e o t c s ( U t S I c b s a p d b D s 2 t 2 Enable printing of all character codes M A D H IBM &SC> ‘Y[...]

  • Página 50

    S M A D H s < “ - “ “ 2 4 IB 7E 31 < “ -“ < 2 1 IB 7E 01 Causes subsequent zero characters to be overprinted with a slash (m. M A D H s < “ - “ “ 2 4 IB 7E 30 < “ - “ < 2 0 IB 7E 00 Causes subsequent without a slash. CHARACTER SIZE zero characters to be printed normally (0), AND PITCH COMMANDS I M A D H s < [...]

  • Página 51

    M A D H Both <Sb 1 O < < 27 15 I O Changes from pica to condensed pica (17 cpi) or from elite to condensed elite (20 cpi). Ignored if the P button was pressed during power-up. M A D H Both < 1 1 I Standard mode, changes from condensed pica to normal pica or from condensed elite to normal elite. In IBM mode, always changes to normal pica[...]

  • Página 52

    M A D H I <so> I I 14 I OE - t ‘ 1 1 <ESC> <SO> 27 14 1 O i Causes subsequent charactem in the current line to be expanded to double width. characters return to normal width after the next line feed (cLF>). The cDC4>, cVT>, -, and <ESC> “W” O com- mands also cancel expanded printing. M A D H Both < m 1 Stop[...]

  • Página 53

    I M A D H s <ESC> “!” n 27 33 n IB 21 n Selects a combined print mode according to the value of n. The value of n is the sum of the values given below for the desired char- acteristics. Examples: n = 1 gives elite; n = 9(1 +8) gives emphasized elite; n = 137(1 + 8 + 128) gives underlined emphasized elite. Function n value Underline 128 It[...]

  • Página 54

    n Effect O Normal size 1 Double-high, double-wide 2 Quadruple-high, quadruple-wide M A D H B “ “ “ “ “S” “ “ “ “ n 40 40 &l 41 41 n 28 28 53 29 29 n Selects acombinationof characterheight and width according to the value of n, as below. Does not move the base line. n Character width Character height O Single width Single hei[...]

  • Página 55

    M A D H std. < “ “ 2 4 IB 77 w < “ c 2 0 10 77 00 Terminates double-height printing and prints subsequent characters at normal height. Resumes super/subscript and condensed printing if these modes we~ in effect before double height was selected. M A D H I <Esc> “[” V@” < < 27 91 64 4 0 IB 5B 40 04 W <0> <0>[...]

  • Página 56

    VERTICAL POSITION COMMANDS M A D H B CEsc> “o” 27 4S IB 30 Sets the distance the paper advances or reverses in subsequent line feeds to 1/8 inch. 7~2 M A D H B < “ 27 49 IB 31 Sets the distance the paper advances or reverses in subsequent line feeds to 7/72 inch. M A D H std. < “ 27 50 IB 32 Sets the distance the paper advances or [...]

  • Página 57

    I n/72 M A D H B < ‘ n 27 65 n IB 41 n I Standard mode, sets the distance the paper advances or reverses in subsequent line feeds to nf72 inch, where n is between O and 255. ~ If n =0, the line spacing is set to O. In IBM mode this command does the same except that (1) the new line spacing does not take effect until the next <ESC> “2?[...]

  • Página 58

    . M A D H B < “~’ n 27 74 n IB 4A n Feeds thepaperonce by n/216 inches, where n is between 1 and 255. Does not move the print position right or left in the standard mode. Does not change the line-spacing setting. M A D H std. <ESC> “j” n 2 n IB 6A n Feeds the paper once by n/216 inches in the reverse direction, where n is between 1[...]

  • Página 59

    7 M A D H B < “ n 27 67 n IB 43 n Sets the page length ton lines in the current line spacing, where n is between 1 and 127 in Standard mode orbetween 1 and 255 in IBM mode. Changing the line spacing later does not alter the physical page length. The current line becomes the top of the page. M A D H B < “ c n 27 67 0 n IB 43 W n Sets the p[...]

  • Página 60

    I M A D H B <FF> 1 O Feeds the paper to the top of the next page according to the current page length, and moves the print position to the left margin. When the automatic sheet feeder (ASF) is selected (DIP switch 1-4 is OFF), this command ejects the current page. M A D H std. < < 27 12 I O Feeds the paper backward to the top of the cur[...]

  • Página 61

    I M A D H B <ESC> “B” nl n2 ... <O> 2766 nl d ... 0 IB 42 nl n2 . . . W Cancels all curnmt vertical tab stops and sets new vertical tab stops at lines nl, rd. etc., where nl, n2, etc. are numbers between 1 and ~ 255. A maximum of 16 vertical tab stops can be set. The tab stops must be specified in ascending orde~ any violation of as[...]

  • Página 62

    M A D H B < 1 m Feeds the paper to the next vertical tab stop and moves the print position to the left margin. Performs a line feed ifno vertical tabs are set, as at power-up. Feeds to the top of the next page if vertical tabs are set but the current line is at or below the last vertical tab stop. HORIZONTAL POSITION COMMANDS M A D H std. cESC&g[...]

  • Página 63

    I M A D H std. c “ n 27 81 n IB 51 n Sets the right margin at column n in the curnmt character pitch (pica pitch if proportional spacing is currently selected). Column n becomes thelastcharacterpositionin theline.Theright margin does not move if the character pitch is changed later. The right margin must be within the limits below: Pica 4< n &[...]

  • Página 64

    M A D H E C “ < 27 53 1 IB 36 01 Causes the printer to perform both a carriage xetum and line feed each time it ~ceives a <CR> code. This command takes priority over DIP switch 1-3. M A D H I < “ < 27 63 0 IB 36 00 Causes the pnnterto perform only a carriage return when it receives a <C- code. This command takes priority over [...]

  • Página 65

    I M A D H s c “ “ 27 97 50 IB 61 32 < “ c 27 97 2 IB 61 02 Aligns subsequenttext with the right margin, leaving the left margin ragged. M A D H B <ESC> “D” nl n2 .. . <0> 2766 nl d .. . 0 IB U nl d ... 00 Cancels all current horizontal tab stops and sets new tab stops at columns nl, ti, etc. in the current character pitch ([...]

  • Página 66

    M A D H B < I 9 0 Moves the print position to the next horizontal tab stop. Ignored if the~ is no nexthonzontrd tab stop in the current line. Note that when underlining is selected, spaces skipped by horizontal tabulation are not underlined. M A D H s @SC> ‘A” nl n2 27 92 nl d IB 5C nl d Moves the print position right orleft a specified d[...]

  • Página 67

    I GRAPHICS COMMANDS M A D H B c “ n n 27 75 nl d IB 4B nl n2 ml m2 . . . ml m2 ... ml m2 ... Prints bit-image graphics at 60 dots per inch horizontally. The graphic image is 8 dots high and nl + ti x 256 dots wide. Maximum width is 8 inches (480 dots). ml, ti, .. . are the dot data, each a 1- byte value from O to 255 repenting 8 vertical dots, wi[...]

  • Página 68

    I q M A D H B < “ n n 27 90 nl &? IB 5A nl n2 ml d ... ml d ... ml d ... Prints bit-image graphics at 240 dots per inch horizontally (maxi- mum 1920 dots wide), skipping every second dot in the horizontal di~ction. See <ESC> “K” for other information. M A D H s < “ n n 27 42 nO nl IB 2A nO nI n2 ml d ... d ml d ... d ml d ..[...]

  • Página 69

    I M A D H s C “ n 27 94 ?@ td IB 5E no nl d ml m2 ... n2 ml rn2 ... n2 ml d ... Selects one of eight graphics modes depending on the value of nO and prints 9-pin bit-image graphics in this mode. The graphics image is 9 dots high and n] + n2 x 256 dots wide. Maximum width is 8 inches. Dots beyond the right margin are ignored. mI, m2, .. . are byte[...]

  • Página 70

    DOWNLOAD CHARACTER COMMANDS M A D H ~ “ C n 27 38 0 d IB 26 W n] s ? d M m d d m m m m3 ... mll d ... m d ... m Defines one or more new draft characters and stem them in RAM for later use. DIP switch 1-2 must be OFF; otherwise RAM is used as an input buffer, not for downloading characters, and this com- mand is ignored. Draft mode must be selecte[...]

  • Página 71

    M A D H < “ c n 27 36 0 nl IB 26 00 nl s d mO ml d d m d d m.? ... m46 m ... m n ... m Defines one or more new NLQ charactem and stores them in RAM for later use. DIP switch 1-2 must be OFF. NLQ mode must be selected before this command is executed. The parameters are the same as for the draft download character command except that the attribu[...]

  • Página 72

    M A D H C “ n d C 27 61 nl d 21 IB 3D n] n2 15 I a al a2 ml aO al a2 ml aO al d ml d ... m46 d ... m d ... m Defines one or more new NLQ characters and stores them in RAM for later use. DIP switch 1-2 must be OFF. NLQ mode must be selected before this command is executed. The parameters are the same as for the draft character command except that [...]

  • Página 73

    M A D H I < “ “ 27 73 52 16 49 34 < “ < 27 73 4 16 49 04 Selects the download character set and draft quality. Ignored if the ‘ F button was pressed during power-up or if DIP switch 1-2 is ON. M A D H I < “ “ 27 73 53 16 49 35 < “ < 27 73 5 16 49 05 Selects the download character set, draft quality, and elite pitch ([...]

  • Página 74

    OTHER PRINTER CONTROL COMMANDS 1 M A D H s < “ 27 62 I 3 S t most significant bit of each subsequent byte received to 1, allowingusem with a 7-bit interface to access characters with ASCII codes greater than 127. O M A D H s < “ 27 61 I 3 Sets the most significant bit of each subsequent byte received to O. M A D H s < “ 27 35 IB 23 C[...]

  • Página 75

    I M A D H s < 2 4 IB 73 31 < “ < 2 1 IB 73 01 Selects the quiet print mode, in which the printer prints each line in two passes to reduce the sound of printing. You can also set the quiet mode with the control panel button. M A D H s < “ 2 4 IB 73 30 < “ < 2 0 IB 73 w Cancels the quiet print mode, and resumes normal printing[...]

  • Página 76

    M A D H B c 7 0 Sounds a brief beep tone from the printer’s beeper. M A D H B < “ “ 27 85 48 IB 55 30 < “ < 27 85 0 IB 55 W Causes subsequent printing to be done in the normal bidirectional mode, which is faster than unidirectional printing. U ~ I A D I H B < “ “ 27 35 49 IB 55 31 < “ < 27 35 1 IB 55 01 Causes subseq[...]

  • Página 77

    I M A D H < <EM> <4> Both ,<(,, ,,(,, ,,4,, ,,),, ,,),, 27 25 4 IB 19 M 40 40 52 41 41 28 28 34 29 2?I Selects the automatic sheet feeder. Ignored if DIP switch 1-4 is ON (ASF inactive). M A D H < c “ B ,,(,, ,,(,, 27 25 82 IB 19 52 “R” “ “ “ “ )) 40 40 82 41 41 28 28 52 29 29 Ejects the current page. Ignored if D[...]

  • Página 78

    chapter 5 D O C With this printer you can create new charactem and symbols, download their dot data, and have them printed in place of selected characters in the regular character set. Charactem that can be generated in this way range from simple but useful symbols like the check mark through complex Chinese or Japanese charactem. Regular charactem[...]

  • Página 79

    I ● ● ● ● The minimum width of a character is five dots. The user-defined charactem may use eight dots vertically. Dots cannot overlap — that is, you may not have a dot inside a box next to one that is on a line. You may define any position in the ASCII table. Photocopy the grid in Figure 5-2 to help design yournew characters. We will use[...]

  • Página 80

    A C D 1 L s O L c v = D x 1 + ( X 1 + L 1 0 0 4 36 2 72 F 5 A t v o t d i e c a w t s e m a t b Next you must choose whether to make the car symbol an ascender or a descender. This determines how the character is seated on the line: Ascender: !l~~h: Descender: !...!:::,}!:’2 ., .,,. We decided that our car symbol will not be a “descender”, so[...]

  • Página 81

    ! Now, we calculate the vertical numerical values of the columns of dots, and enter them underneath the grid. For example, looking at Figure 5-3, we see that intheleft-most column there are five dots, and they am sitting in the “64” box, “32’’box, “16” box, “’8” box, and “4” box. Thus itsverticalvalue is 124. In the next col[...]

  • Página 82

    450 460 470 480 490 500 510 320 530 540 550 560 570 580 590 600 610 62-0 630 640 650 660 670 680 690 L P “ C ; ; F 1 T 8 S . L P C ( ; N I L P L P “ ; ( ; F 1 T 1 S . L P C H N I L P L P C H ’ SCA L F 1 T 8 S 2 L P S C N I L P “ L P C H ” “ F 1 T 8 S 2 L P “ “ N I L P C H ; “ L P C H ; ’ ; L P C H “ M O D L P C H ; L P C H ; 7[...]

  • Página 83

    I DEFINING YOUR OWN NLQ CHARACTERS As you probably noticed, NLQ characters are printed by two passes of the print head. Half of the character is printed on the first pass, and the remainder on the second pass. The paper is rolled up half a dot height in between passes to let the print head print dots on the second pass that overlap the previous dot[...]

  • Página 84

    simultaneous use of regular and download characters in the draft character section apply equally to NLQ characters. ( . m . ( 1 1 A C D L s R s 8 = D x 1 8 + ( x 1 4 + R 4 2 2 I l 1 2 g 5 U t g ( o s i d y o N c ( . m . ( 1 1 A C D T 8 L s O 8 R s O 4 = D x 1 4 + ( x 1 2 2 I Ist: 14 3, 70 70 126 0 0 0 9 1 16 1 0 6 6 2nd: .28 74 14 74 124 0 64 32 16[...]

  • Página 85

    [...]

  • Página 86

    chapter 6 M A Y P When using your printer with an IBM PC, PC-XT, or PC-AT or compatible, you will probably be using PC-DOS or MS-DOS as an operating system. A number of software tricks maybe usefid here. This chapter is not, however, a substitute for the operating system manuals supplied with your computer. To learn how to print files, etc. it is b[...]

  • Página 87

    CPI Number of columns Pica 10 80 Elite 12 96 Condensed pica 17.1 137 Condensed elite 20 160 Proportional Variable Sometimes the software installation will ask you for an initialization sequence to return to the default settings. The command for your printer is <ESC> @. Make sure that the DIP switches are set for the correct printer emulation,[...]

  • Página 88

    File as seen on computer screen: ( F ( S P r c o ( ( ( S F c o ( F ( F) ) ( F b ( ) a d Printout: PRINTER COMMANDS F c o c b e EMBEDDED a C l i When you use these commands there are several points to note: ● The font ((F’)) command is ignored if the F button was held down when power was switched on. Q A line consisting of commands alone prints [...]

  • Página 89

    PROGRAMMING THE PRINTER WITH DOS COMMANDS If your system includes the file PRINT.COM you can use the main DOS printing command. Simply type the word PRINT followed by the name of the file you want to print. To print a fde named README.DOC, for example, type: A > P R . D The computer may respond with the following message, asking which printer to[...]

  • Página 90

    If you print from the DOS command level very often, it will be advantageous to cn?ate a printer setup fde. Then instead of setting font etc. manually each time, you can complete the setup with a single command from your computer. For example, you can create a file containing printer commands to select near letter quality, and select elite pitch wit[...]

  • Página 91

    I You can now set up the printer by sending it the file NLQELITE.DAT. To avoid unnecessary logging of commands, switch hard-copy output off (by pressing CTRL-PRTSCifhard copy is on). To print the file README.DOC in NLQ elite type, give the following two commands: A )COF’Y NLQELITE . PAT PRN A ,> PRINT README . DOC For greater convenience you c[...]

  • Página 92

    1120 LPRINT E$; ’’D’’ ;CHR$(3) ;CHR$(13); CHR$(O) ‘Set ~ 1130 LPRI~ C$; “Fonts are:” 1140 LPRINT H$; D$; “Draft charactem, “ 1150 LPRINT H$; C$; “Ccurier characters, ” 1160 LPRINT H$; S$; “SanSerif characters, ” 1170 IFRINT H$; Ol$; ’’Orator with small capitals, or “ 1180 LPRINT H$;02$; “ with lower case characters[...]

  • Página 93

    1650 1660 1670 1680 1690 1700 1710 1720 1730 1740 1750 1760 1770 1780 1790 1800 1810 1820 1830 1840 1850 1860 1870 1880 1890 1900 1910 1920 1930 1940 1950 1960 1970 1980 1990 2000 2010 2020 2030 2040 2050 2060 2070 2080 2090 2100 2110 2120 LPRI~ H$; C$; ‘Tbwnload characters: “; LPRI~ D$;E$; “%1”; ‘ Select download character FOR 1==1 ITI 5[...]

  • Página 94

    2180 RE’IURN 2190 ‘ 2200 ‘ Define NIL.) download character 2210 LPRINT C$;E$; “&” ;CliR$(0) ;CHR$ (60) ;CIiR$(60) ; 2220 RESKK!E 2330 2230 FOR M-O IU 46 2240 READ MM 2250 LPRIIW CHR$(MM) ; 2260 NEXT M 2270 REIURN 2280 ‘ 2290 ‘ DATA 2300 ‘ Draft download character data 2310 DATA 139,124, 0, 66, 4, 64, 36, 16, 2, 16, 12, 0 2320 ?[...]

  • Página 95

    I How the program works This program begins by assigning a number of printer commands to BASIC string variables (lines 1000 to 1090). You can find most of these commands near the beginning of chapter 4. The WIDTH “LPT1:” 255 statement in line 1110 means infiite line width. It prevents the IBM-PC from inserting unwanted carriage mtums and line f[...]

  • Página 96

    Fonts are: ,,. ,. I.,: f.;:,,’!! (:::ll~;i,;[{j,l,,, ““i: :.[; i’!’ ’;;:.:, Courier characters, Sanserif characters, ORATOR WITH SMALL CAPITALS, OR with lower case characters, iW7d ITALICS Fof - all i“i::’-!”:’f”!!. Print pitches are: Pica pitch, Elite pitch, Condensed pica pitch, Condensed elite p]tch, and proportional spacin[...]

  • Página 97

    MEMO tul[...]

  • Página 98

    chapter 7 TROUBLESHOOTING AND MAINTENANCE The following section on troubleshooting and maintenance is intended only ~ a brief guide. Remember that your printer is a highly sophisticated electronic device, which also contains high voltage inside. For that reason, only carry out those operations that are described in this chapter. CAUTION: Anyattempt[...]

  • Página 99

    Power supply If the POWER indicator does not illuminate, check the following: Check Possible remedy Is the power cable properly Tum off the printer, make certain that the power cable plugged into the electrical is securely connected, and then turn theprinterbackon. outlet? Is power being supplied to Turn off the printer and unplug it. Try out anoth[...]

  • Página 100

    If the print is faint, or uneven, check the following: Check Possible remedy Is the ribbon properly irt- 1 Check and reinstall if necessary. Stdkd? Is the ribbon worn out? The nbbonhas a long life, but will eventually needre- placing. Fit a new ribbon cartridge ifnecessaxy. If dots are missing in the printing, check the following: Check Possible re[...]

  • Página 101

    Paper feeding If cut sheet paper (without the ASF) is not feeding smoothly, check the following: I Check I Possible remedv I Is the papa release lever I Set the release leva to the ~ position. pushedback(tothe ~ posi- 1 tion)? Is the paper guide in place The paper guide should be in place vertically for cut and vertical? sheets to feed smoothlv. . [...]

  • Página 102

    Check Possible remedy I Are you trying to feed paper using the ffont panel buttons while the ON LINE indicator is illuminated? You can only feed paper in this way when the printer is off-line. Set the printer off-line and then feed paper. Is the paper too thick? There prelimits to the thickness ofpaperthatcanbe fed ‘1 in this way (one top copy an[...]

  • Página 103

    I If the paper park facility does not appear to be working correctly, check the following: Check Possible remedy Is the paper release lever in Thepaperrelease Iever must be set to the * position the * position? after the fanfold paper has been parked. Has the fanfold paper been Make sure that the POWER indicator comes on flashing properly parked? a[...]

  • Página 104

    MAINTENANCE Essentially, your printer is a robust piece of equipment, but should be treated with a modicum of care in order to avoid malfimctions. For example: ● ● ✎ ● ● Keep your printer in a “comfortable” environment. Roughly speaking, if you are comfortable, then the environment is suitable for your printer, too (see Chapter 1). Do[...]

  • Página 105

    r cover —. — Figwu 7-T. Replacing the print head %[...]

  • Página 106

    6. Disengage thecablefromthetabsholdingitdown,thenremove thepnnt head. 7. Foreasy instaLlationofthe newprinthead, movethe carnage toward the left end of the rail. 8. Place the new print head on its support, seating it on the two pins. 9. Thread thenewcablethesame wayastheold, securing itunder thethree tabs on the print head carriage. 10. Plug the c[...]

  • Página 107

    MEMO 98[...]

  • Página 108

    I chapter 8 SPECIFICATIONS Printing system ... .. .. .. .. . .. .. .. .. .. .. . .. ... Serial Impact Dot-matrix Printing speed . .. .. .. .... ... .... .... ... .... ... 150 cps (Draft pica) 37.5 cps (NLQ pica) Print direction . . . .. .. .. .. . .. .. .. .. .... ... .... . Bidirectional, logic-seeking Unidirectional, logic-seeking (selectable) Nu[...]

  • Página 109

    I Character dot matrix . .. .. .. .. .. ... .... .... 9 x 11 (Draft) 18X 23 (NLQ) Bit image dot-matrix ... .... .... ... .... .... DPI Normal 60 Double 120 High-speed double* 120 Quadruple 240 CRT I 80 CRT II 90 Plotter 72 Double-plotter 144 (8 or 9) x 480 (8 or 9) x 960 (8 or 9) x 960 (8 or 9) x 1920 (8 or 9) x 640 (8 or 9) x 720 (8 or 9) x 576 (8[...]

  • Página 110

    I Ribhn fife .. .. . . . ... ......... lrnillio ncharacter s(draftpica) Dimensions . .. .. .. .. .. . .. . . .. ...... ..... ...... . 396(w) x 301(d) x 120(h) mm 15.6(w) xll.8(d) x4.7(h) in Weight . . ... .... ... .... ... .........................5.1kg (11.21b) Power supply ...... ... . .. ~.u.w~... 120VAC,220VAC, 240VAC,50/60Hz (varies accordingt[...]

  • Página 111

    The following describes the pinout of the parallel (Centronics-type) inter- face connector (signals which are low when active ate overlined): Pin Name Function 1 STROBE Goes from high to low (for 20.5ps) when active I 2 I DATAO I High when active I 3“ DATA1 High when active 4 DATA2 High when active 5 DATA3 High when active 6 DATA4 High when activ[...]

  • Página 112

    I chapter 9 CHARACTER SETS The following tables show the standard and IBM character sets. The decimal character code of each character is shown in an inset to the lower right of the character. The hexadecimal code can be found by reading the entries at the top and left edges of the table. For example, the character “A” is in column 4 and row 1,[...]

  • Página 113

    I STANDARD CHARACTER SET #1 2 1 3141516 * 3 c s 51 67 s? 4 D T 52 6E 84 W-db 7 I > 118 h , izi 104[...]

  • Página 114

    105[...]

  • Página 115

    STANDARD CHARACTER SET #2 Other characters are identical to standard character set ##l. 106[...]

  • Página 116

    INTERNATIONAL CHARACTER SETS When an international character set is selected DIP switches 2-2 to 2-4 or by a command from software, the following changes are made in the character set: See Chapter 3 for the DIP switch settings. The command for selecting the international character sets is: <ESC> “R” n Where n means character code n, i.e. [...]

  • Página 117

    IBM CHARACTER SET #2 108[...]

  • Página 118

    109[...]

  • Página 119

    IBM CHARACTER SET #1 Other characters are identical to character set #2. The duplication of control codes enables systems with a 7-bit interface to obtain control fi,mctions when the most significant bit is set to 1 by the cESC> “>” command in the standard mode. 110[...]

  • Página 120

    . . * o[...]

  • Página 121

    112[...]

  • Página 122

    I INDEX El Absolute horizontal tab, 57 Ascender, 61,71 Auto feed, 67 Automatic line feed, 31,55 Automatic sheet feeder, 8,31,67, 101 m--l Backspace, 55 Bail lever, 3, 10 BASIC, 23,72-73,82 Beeper, 67 Bidirectional printing, 67 Bit-image printing, 58-60,86 Bold printing, 37 Bottom margin, 50 Buffer, 27,30, 100 m Cancel command, 65 Carriage return, 5[...]

  • Página 123

    ml Hexadecimal dump, 23-24 Horizontal position commands, 53-57 Horizontal tabulation, 57 ml IBM character sets, 39, 108-111 IBM rode, 30,88 IBM-PC, 24 Interface: signals, 102 specifications, 100 International characters, 32,40, 107 Italic printing, 36 III Justification, 55 ml Left margin, 53 Line feed, 48 Line spacing, 4748,99 Locating the printer,[...]

  • Página 124

    Reset printer, 68 Reverse line feed, 48 Reverse micro-feed, 27 Ribbon cartridge, 4, 101 Right margin, 54 ROM character set, 64 r-m — S1nserif type style, 20,35 Self tests, 21-22 Setting up, 4 Single sheets: automatic loading, 8 manual loading, 10 specifications, 100 Slash zero, 41 Small capitals, 20 Specifications, 99-102 Sprocket feed, 11-14, 10[...]

  • Página 125

    I COMMAND SUMMARY MODE CONTROL CODE FUNCTION L*M Std. std. Std. std. ::: std. Std. std. Std. Std. Std. Std. Std. Std. Std. IBM Std. IBM Std. IBM IBM <BEL> <BS> <HT> <LF> <VT> <FF> <Cfb <so> <Sb <Del> <DC2> <DC2> <DC3> <DC4> <CAN> <ESG <LF> <Esc> <F[...]

  • Página 126

    MODE CONTROL CODE FUNCTION PAGE <ESC> “6” Select character set #2 39 <ESC> “7” Select character set #1 39 <ESC> “8” Disable paper-out detector 51 <ESC> “9” Enable paper-uut detector 51 IBM <ESC> “:” Elite pitch 41 Std. cESC> “:” <(b n <O> Copy-standard characters from ROM into RAM 63[...]

  • Página 127

    MODE CONTROL CODE FUNCTION PAGE <E-SC- “w” <(b. Cancel expanded printing 42 <we “w” <1> Expanded printing 42 <me “w’ “o” Cane.=zl expanded printing 42 <me “w’ “l” Expanded printing 42 IBM <lSC> “X” nl n2 Set left and rieht mareins 54 IBM ;*M IBM IBM std. IBM IBM IBM IBM W std. std. Std. Std. St[...]

  • Página 128

    MODE CONTROL CODE Std. cESC> “-” “l” std. <DEL> “(” “(” “0” “)” “)” “(” “(” “4” “)” “)” “(” “(” “F” ‘“)” “)” “O” “(,, .,(,, ..F.. ..).. L.)>, LL~.. “(” “(” “F” ‘i)” ‘i)” “7” “(” “(” “F” “)” “)” “8” “(” “(” [...]

  • Página 129

    Consumer Response Star Micronics Co., Ltd. invites your suggestions and comments on your printer and this manual. Please address your correspondence to: Worldwide Headquarters: STAR MICRONICS CO., LTD. 194 Nakayoshida Shizuoka, JAPAN 422-91 Attn: Product Manager American Market: STAR MICRONICS AMERICA, INC. 420 Lexington Avenue, Suite 2702-25 New Y[...]

  • Página 130

    PRINTED IN JAP AN[...]