Español dropdown-ico

Stow RCC130H manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60

Ir a la página of

manuales de instrucciones parecidos

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Stow RCC130H. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Stow RCC130H o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Stow RCC130H se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Stow RCC130H, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Stow RCC130H debe contener:
- información acerca de las especificaciones técnicas del dispositivo Stow RCC130H
- nombre de fabricante y año de fabricación del dispositivo Stow RCC130H
- condiciones de uso, configuración y mantenimiento del dispositivo Stow RCC130H
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Stow RCC130H no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Stow RCC130H y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Stow en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Stow RCC130H, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Stow RCC130H, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Stow RCC130H. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    OPERATION AND PARTS MANUAL STOW CONSTRUCTION EQUIPMENT A DIVISION OF MULTIQUIP INC . POST OFFICE BOX 6254 CARSON, CA 90749 310-537-3700 • 888-252-STOW [888-252- 7869] FAX: 310-537-1986 • FAX: 800-556-1986 E-MAIL: stow@mul tiquip.com • WWW: stowmfg.com Gasoline Crack Saw Model RCC130H PARTS DEPARTMENT: 800-427-1244 FAX: 800-672-7877 SERVICE DE[...]

  • Página 2

    [...]

  • Página 3

    TABLE OF CONTENTS RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 3 STOW CRACK SAW MODEL RCC130H Table Of Contents .............................................................................................................. ................... 3-4 Parts Orderi ng Proc edures ....................................................[...]

  • Página 4

    TABLE OF CONTENTS RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 4 Component Parts Drawings Operator Handl e Asse mbly....................................................................................................... ......... 46-47 Drivetrain Assembly .......................................................................[...]

  • Página 5

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 5 NOTE PAGE[...]

  • Página 6

    PARTS ORDERING PROCEDURES RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 6 When ordering parts, please supply the following information:  Dealer account number  Dealer name and address  Shipping address (if different than billing address)  Return fax number  Application Model number  Quantity, part number and [...]

  • Página 7

    NOTICE TO OPERATORS RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 7 IF YOU CAN NOT READ OR DO NOT FULLY UNDERSTAND THE CONTENTS OF THIS MANUAL, PLEASE CONTACT THE FACT ORY FOR PROPER ASSISTANCE BEFORE ATTEMPTING TO OPERATE THIS PRODUCT. SI TU NO PUEDES LE'ER O NO COM PRENDES EL CONTENIDO DE ESTE MANUAL FAVOR DE PONERSE EN[...]

  • Página 8

    NOTICE TO OPERATORS RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 8 The concept of frame mounted type Crack Saws has been successfully utilized for many years as a practical solution to many types of random crack sawi ng requirements. The basic concept is proven and well accepted within the associated marketplaces. U se of a C[...]

  • Página 9

    OPERATOR INSTRUCTIONAL DATA SHEET RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 9 The following undersigned operators of the RCC130H CRACK SAW described and/or pertaining to this Operator Manual have received formal safety and operational information/instruction from the undersigned owner(s)/instructor(s) in accordance to OSHA[...]

  • Página 10

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 10 SAFETY PRECAUTIONS THE FOLLOWING SAFETY PRECAUTIONS PROVIDE SOME COMMON SENSE GUIDES TO PROMOTE SAFETY AND EFFICIENCY WITH THE CRACK SAW. NO WARRANTY, GUARANTEE OR REPRESENTATION IS MADE BY THE MANUFACTURER AS TO THE ABSOLUTE CORRECTNESS OR SUFFICIENCY OF ANY INFORMATION OR STAT[...]

  • Página 11

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 11 SAFETY PRECAUTIONS 6) Prolonged use of the CRACK SAW (or other, similar machines) exposes the operator to vibrations which may produce Whitefinger Disease (Raynaud's Phenomenon). This phenomenon reduces the hand's ability to feel and regulate temperature, produces numb[...]

  • Página 12

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 12 SAFETY PRECAUTIONS OPERATION. 1) Give complete and undivided attention to the job at hand. Do not chew gum, smoke and/or use smokeless tobacco while ut ilizing the Crack Saw. Do not attempt to eat and/or drink while utilizing the Crack Saw. Determine that eyeglasses and/or heari[...]

  • Página 13

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 13 SAFETY PRECAUTIONS vehicle, with greater horsepower and less mobility), method and/or process be utilized to properly complete the job with the degree of efficiency and safety required. Contact the Customer Service Department for specific information regarding suitable job appli[...]

  • Página 14

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 14 ASSEMBLY INSTRUCTIONS/OPERATIONS Assembly The RCC130H Crack Saw is shipped from the factory secured on a specially designed wooden pallet and protected from external damage by a corrugated carton or wood crate. If shipped with a corrugated carton, the Crack Saw can be secured to[...]

  • Página 15

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 15 ASSEMBLY INSTRUCTIONS/OPERATIONS 1) Determine the location of the fuel tank filler cap. 2) Carefully clean the filler cap and surrounding area to insure that no dirt or debris falls into the fuel tank. Remove the filler cap. 3) Using the funnel, fill the f uel tank with fresh, c[...]

  • Página 16

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 16 ASSEMBLY INSTRUCTIONS/OPERATIONS DANGER IMPROPER USE OF A DIAMOND BLADE WITH THE CRACK SAW CAN RESULT IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. DANGER PROPER OPERATIONAL USE OF A DIAMOND BLADE THAT DOES NOT MEET INDUSTRY SPECIFICATIONS AND/OR SAFETY STANDARDS WITH THE CRACK SAW[...]

  • Página 17

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 17 ASSEMBLY INSTRUCTIONS/OPERATIONS the cut and letting it cool by rotating in the air for 15 to 20 seconds after every one minute of cutting. 13) Do not force the tool into the material to be cut. A properly working diamond tool will grind the material without excessive force bein[...]

  • Página 18

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 18 ASSEMBLY INSTRUCTIONS/OPERATIONS FIGURE 1 3) Position the quick change height lever over center to its rear most (up) position. FIGURE 2. FIGURE 2 DANGER IMPROPER BLADE POSITION DURING THE STARTING PROCEDURE CAN ALLOW THE BLADE TO CONTACT THE WORK SURFACE BEFORE THE OPERATOR CAN[...]

  • Página 19

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 19 ASSEMBLY INSTRUCTIONS/OPERATIONS while following a random crack. Determine the correct rotation orientation for the diamond blade and install it on the arbor shaft. FIGURE 5. 8) Reinstall the hub flange on the arbor shaft and align the stud directly with the corresponding hole i[...]

  • Página 20

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 20 ASSEMBLY INSTRUCTIONS/OPERATIONS PROPER QUANTITY OF PERSONNEL IN PROPER PHYSICAL CONDITION. The integral lifting bail device(s) can be used to facilitate lifting by a mechanical device incorporating a chain and suitable attachment device. The location of the lifting bail(s) may [...]

  • Página 21

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 21 ASSEMBLY INSTRUCTIONS/OPERATIONS 4) Refer to the material supplied by the engine manufacturer for the corre ct starting, operation and stopping procedures. 5) The RCC130H Series Crack Saw is equipped with a non slip type foot pad to provide additional stability during the engine[...]

  • Página 22

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 22 ASSEMBLY INSTRUCTIONS/OPERATIONS PROPERTY DAMAGE AND/OR PERSONAL INJURY. EXCESSIVE LEVELS OF CARBON MONOXIDE CAN CAUSE DEATH. 1) The Crack Saw is of a downcut type design as viewed by the operator. The diamond blade is intended to rotate toward the operator to enhance visibility[...]

  • Página 23

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 23 ASSEMBLY INSTRUCTIONS/OPERATIONS 5) Turn the height adjustment lever clockwise to lower the blade into the crack until the desired sawing depth is achieved. Each full turn of the crank lever will raise/lower the blade approximately 1/16 inch. 6) Following the random crack direct[...]

  • Página 24

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 24 ASSEMBLY INSTRUCTIONS/OPERATIONS FIGURE 25 The amount and direction of forces to apply to the operator handle are governed by, but not necessarily limited to the following factors: a) Average Random Crack Width. b) Diamond Blade Saw Width. c) Sawing Depth. d) Tensile strength of[...]

  • Página 25

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 25 ASSEMBLY INSTRUCTIONS/OPERATIONS 11) The sawing process on many work surface materials can produce sparks, dust and other foreign particle contamination. DANGER SPARKS PRODUCED BY THE ACTION OF THE DIAMOND BLADE AGAINST THE WORK SURFACE (FOR EXAMPLE: STRIKING ANCHOR BOLTS) MAY C[...]

  • Página 26

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 26 ASSEMBLY INSTRUCTIONS/OPERATIONS of the work surface when deployed to its maximum up position. FIGURE 28. FIGURE 27 FIGURE 28 The quick-change height lever is intended to provide a fast method to raise the blade for the following reasons: a) When the sawing process is completed [...]

  • Página 27

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 27 ASSEMBLY INSTRUCTIONS/OPERATIONS A BLADE OF PROPER DIMENSIONS IS BEING UTILIZED. IF THERE ARE ANY QUESTION REGARDING PROPER BL ADE DIMENSIONS FOR USE WITH THE CRACK SAW, CONTACT THE CUSTOMER SERVICE DEPARTMENT FOR SPECIFIC INFORMATION. THERE IS NO CHARGE FOR THIS SERVICE. DANGER[...]

  • Página 28

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 28 ASSEMBLY INSTRUCTIONS/OPERATIONS FIGURE 33 DANGER IMPROPER SAWING PROCEDURES FOR ANY SPECIFIC RANDOM CRACK CAN SUBSTANTIALLY REDUCE OPERATOR CONTROL, OVERALL PRODUCTIVITY AND CAUSE SEVERE DIAMOND BLADE DAMAGE, RESULTING IN PROPERTY DAMAGE AND/OR PERSONAL INJURY. 15) Increased pr[...]

  • Página 29

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 29 ASSEMBLY INSTRUCTIONS/OPERATIONS STOPPING THE RCC130H SERIES GASOLINE POWERED CRACK SAWS. 1) Position the quick change height lever over center to its rear most (up) position. 2) Stop the Crack Saw by moving the engine throttle control lever to the idle speed position. Turn the [...]

  • Página 30

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 30 ASSEMBLY INSTRUCTIONS/OPERATIONS e) Fatigue or alligator. Over time, as a pavement surface ages, it becomes more rigid and has less ability to tolerate vertical load deflections. This occurrence creates a tension and pulling apart in the pavement and results in alligator type cr[...]

  • Página 31

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 31 MAINTENANCE/SERVICE Maintenance/Service PREVENTATIVE MAINTENANCE CHECK LIST. The normal operation of the Crack Saw produces extreme dirt and dust, along with levels of random vibration. Before operat ing the Crack Saw, the following service list should be accomplished. This list[...]

  • Página 32

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 32 MAINTENANCE/SERVICE FIGURE 35 5) Belt alignment is che cked with the straightedge. Place the straightedge squarely against the arbor shaft pulley. Properly aligned pulleys should also place the straightedge squarely against the engine/motor pulley. Remove the straightedge and ro[...]

  • Página 33

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 33 MAINTENANCE/SERVICE CAUTION Observe all applicable safety precautions for the solvent. 3) Remove the belt guard from the main frame. Clean the inside of the belt guard with an appropriate solvent. Check for signs of wear and damage. Secure in a proper storage area. 4) Using the [...]

  • Página 34

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 34 MAINTENANCE/SERVICE c) If the belt tension and alignment are within specifications, torque t he engine/electric motor attachment capscrews to 35 ft lbs (47 N.m). d) Recheck V-belt tension and alignment. 10) Reinstall the belt guard to the main frame. Install the flat washers and[...]

  • Página 35

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 35 MAINTENANCE/SERVICE FIGURE 40 FIGURE 41 CAUTION Exercise extreme caution when pressing the hub body from the arbor shaft/bearing block assembly. Improper activities can result in the components striking body parts, resulting in property damage and/or personal injury. 8) Position[...]

  • Página 36

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 36 MAINTENANCE/SERVICE FIGURE 44. FIGURE 45 11) Clean the bearing journal areas of the arbor shaft with an appropriate solvent. Apply a suitable amount of anaerobic adhesive/ sealant to the bearing journal area located near the snap ring groove. Press the arbor shaft into the repla[...]

  • Página 37

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 37 MAINTENANCE/SERVICE CAUTION Wear safety glasses and other appropriate safety apparel when removing the snap ring or performing any work with an arbor press. Caution all onlookers about the possibility of flying debris and personal injury. 14) Rotate the arbor shaft by hand to de[...]

  • Página 38

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 38 MAINTENANCE/SERVICE ENGINE SERVICE. RCC130H Crack Saw. Consult the material supplied by the engine manufacturer for specific service and maintenance information regarding: 1) Muffler 2) Spark Plug 3) Air Filter System 4) Carburetor Adjustment 5) Ignition System 6) Short and Long[...]

  • Página 39

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 39 TROUBLESHOOTING Troubleshooting ENGINE FAILS TO START Ignition switch in OFF or cut off position. Place switch in the ON position or move throttle control lever to the ignition operational position. Incorrect carburetor/fuel ignition system adjust ment. See Service section. Air [...]

  • Página 40

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 40 TROUBLESHOOTING periodically with an electronic tachometer to ensure proper operational speed for the blade. UNEVEN SEGMENT WEAR a) If wet sawing, insufficient water flow to one side of the blade which effectively reduces the side clearance. Flush the water system. Determine tha[...]

  • Página 41

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 41 TROUBLESHOOTING BLADE WOBBLES a) Worn machine components. Determine that machine components including bearings, belts and the arbor shaft are not excessively worn and requiring replacement. Determine that the engine runs smoothly to prevent harmonic vibrations which can result i[...]

  • Página 42

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 42 STORAGE Storage Proper procedure for long term storage of the Crack Saw will protect it against the effects of corrosion and damage. If the Crack Saw is not to be operated for a period of 30 days or more, proceed to store as follows: 1) Follow Clean all accumulated foreign mater[...]

  • Página 43

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 43 SPECIFICATIONS Specifications FRAME. STRUCTURE............................................................................ Unitized, Welded Steel Plate DRIVE REDUCTION SYST EM ................................................ BX34 Series Belt/Pulley/Spur Gear Transmission. OVERAL[...]

  • Página 44

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 44 EXPLANATION OF CODE IN REMARKS COLUMN How to read the marks and remarks used in this parts book. Section 1: Items Found In the “Remarks” Column Serial Numbers-Where indicated, this indicates a serial number range (inclusive) where a particular part is used. Model Number-Wher[...]

  • Página 45

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 45 SUGGESTED SPARE PARTS RCC130H CRACK SAW 1 TO 3 UNITS Gasoline Engine Model Honda GX390 Qty. P/N Description 6 ............. 29022-014 ..............V-BELT 3 ............. 17210ZE3505 ........ELEMENT AIR CLEANER 3 ............. 9807956846 ...........SPARK PLUG 1 ............. 176[...]

  • Página 46

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 46 OPERATOR HANDLE ASSY. OPERATOR HANDLE ASSY.[...]

  • Página 47

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 47 OPERATOR HANDLE ASSY. OPERATOR HANDLE ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 29022-017 HANDLE, OPERATOR 1 2 29022-018 CRANK SCREW 1 3 29020-030 KNOB 1 4 29020-031 SCREW, HEIGHT ADJUSTMENT 1 5 29022-019 BEARING 2 6 06503-012 SCREW, CAP ½-13 UNC X 1-1/2” PLATED GRD 5 4 7 0[...]

  • Página 48

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 48 DRIVETRAIN AND ENGINE MOUNTING ASSY. DRIVETRAIN AND ENGINE MOUNTING ASSY.[...]

  • Página 49

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 49 DRIVETRAIN AND ENGINE MOUNTING ASSY. DRIVETRAIN AND ENGINE MOUNTING ASSY. NO. PART NO. PART NAME QTY. REMARKS 1 15103 ENGINE, HONDA 13.0 H.P., GX390K1QXC9 1 2 29022-005 PLATE, ENGINE MOUNT 1 3 29022-006 GUARD, BELT 1 4 29022-007 GUARD, BLADE 1 5 29022-008 BLOCK, BEARING 1 6 2902[...]

  • Página 50

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 50 FRAME ASSY. FRAME ASSY[...]

  • Página 51

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 51 FRAME ASSY. FRAME ASSY NO. PART NO. PART NAME QTY. REMARKS 1 29022-001 FRAME, MAIN 1 2 29018-046 WHEEL 2 3 07030-012 WASHER, FLAT ¾” PLATED 2 4 07028-069 PIN, COTTER 3/16” X 2 PLATED 2 5 29022-002 BUMPER, RUBBER 2 6 08696-010 SCREW, CAP COUNTERSUNK ¼-20 UNC X 5/8” 6 7 29[...]

  • Página 52

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 52 DUST VACUUM PORT ASSY. DUST/VACUUM PORT ASSY[...]

  • Página 53

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 53 DUST VACUUM PORT ASSY. DUST/VACUUM PORT ASSY NO. PART NO. PART NAME QTY. REMARKS 1 29022-028 SHROUD, VACUUM 1 2 29022-029 HOSE, VACUUM 1 3 14821-010 CLAMP, HOSE 3” 2 4 06503-012 SCREW, CAP ½-13 UNC X 1-1/4” PLATED GRADE 5 1 5 06503-010 SCREW, CAP ½-13 UNC X 1” PLATED GRA[...]

  • Página 54

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 54 WET CUTTING KIT ASSY. WET CUTTING KIT ASSY[...]

  • Página 55

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 55 WET CUTTING KIT ASSY. WET CUTTING KIT ASSY NO. PART NO. PART NAME QTY. REMARKS 1 29020-007 VALVE 1 2 29022-030 BLOCK, MANIFOLD 1 3 06500-026 SCREW, CAP 3/8-16 UNC X 3-1/2, PLATED GRD 5 2 4 08233-005 NUT, HEXAGON NYLOC 3/8-16 UNC, PLATED 2 5 29022-031 ADAPTER, HOSE ¼” NPTF 3/8[...]

  • Página 56

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 56 DECALS DECALS[...]

  • Página 57

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 57 DECALS DECALS NO. PART NO. PART NAME QTY. REMARKS 1 29020-045 DECAL, WARNING 1 2 29022-033 DECAL, OPERATION 1 3 29020-048 DECAL, WARNING 2 4 29022-035 DECAL, WARNING 2 5 29022-034 DECAL, WARNING 2 6 29020-047 DECAL, DEPTH CONTROL 1 7 29020-049 DECAL, WARNING 1 8 DCLSDP DECAL, ST[...]

  • Página 58

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 58 Effective : July 15, 2003 TERMS AND CONDITION OF SALE— PARTS PAYMENT TERMS T erms of payment for unit sales are 2% 15 days net 30 days from date of invoice unless otherwise specifically stated on our invoice. Parts invoices have terms of net 10 days. Minimum parts billing is $[...]

  • Página 59

    RCC130H-CRACK SAW OPERATION AND PARTS MANUAL REV #1 (11/18/04) PAGE 59 NOTE PAGE[...]

  • Página 60

    OPERATION AND PARTS MANUAL HERE'S HOW TO GET HELP PLEASE HAVE THE MODEL AND SERIAL NUMBER ON- HAND WHEN CALLING PARTS DEPARTMENT 800-427-1244 or 310-537-3700 FAX: 800-672-7877 or 310-637-3284 SERVICE DEPARTMENT 800-421-1244 FAX: 310-537-4259 TECHNICAL ASSISTANCE 800-478-1244 FAX: 310-631-5032 WARRANTY DEPARTMENT 888-661-4279, or 310-661-4279 F[...]