Sylvania SRC2213X manual

COLOR TV/VCR SRC2213X O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. E NERGY S TAR is a U.S. registered mark. ® ® ® If you need additional assistance f or set-up or operating after reading owner’ s manual, please call T OLL FREE : 1-800-968-[...]

1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions- All opera[...]

- 3 - EN 9I03 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No. 70, provides information with respect to proper[...]

AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radi[...]

- 5 - EN 9I03 T ABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula- tions concerning chemical wast[...]

- 6 - EN 9I03 FEA TURES • Rotary 4-head Record/Pla yback System– Four heads ensure excellent picture quality and special effects playback. • Index Sear ch– Fast-forwards to start of next recording. • Slow Motion– V iew recorded program at slower than normal speed. • Infrared remote control • Bilingual on screen menu displa y selecta[...]

- 7 - EN 9I03 OPERA TING CONTROLS AND FUNCTIONS - TV/VCR FRONT P ANEL - 1 VIDEO input jack– Connect to the video output jack of your video camera or another VCR. 2 A UDIO input jack– Connect to the audio output jack of your audio equipment, video camera or another VCR. 3 PO WER button– Press to turn TV/VCR on and off. Press to activate timer [...]

- 8 - EN 9I03 - REAR VIEW - 17 DISPLA Y button– Display the counter or the cur- rent channel number and current time on the TV screen. (See page 25.) 18 SPEED button– Press to choose the desired recording speed:SP/SLP . 19 T -PROG. CLEAR button– Press to cancel a setting of timer program. (See page 23.) COUNTER RESET button– Press to reset [...]

- 9 - EN 9I03 PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied) is detachable. Insert the stem of the antenna into the hole on the upper-back portion of the TV/VCR. Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT . terminal of the TV/VCR as shown in the diagram. For[...]

- 10 - EN 9I03 INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow . 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover . SET UP FOR USE Y ou can program the tuner to scan[...]

- 11 - EN 9I03 TO SELECT A DESIRED CHANNEL Y ou can select the desired channel by using the CHANNEL K or L button or directly pressing the number buttons on the remote control. Note for using the number buttons: • When selecting cable channels which are higher than 99, press the +100 button first, then, press the last two digits. (Example: to sel[...]

- 12 - EN 9I03 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Begin auto preset Press the PLA Y/ K [...]

- 13 - EN 9I03 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Select “ADD/DELETE CH” Press the PLA Y/ K or STOP/ L but- ton to point to “ADD/DELETE CH”. Press the F .FWD/ B button. 3 Enter the desired chan[...]

- 14 - EN 9I03 TV OPERA TION WA TCHING A TV PROGRAM 1 T urn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VCR [...]

- 15 - EN 9I03 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, yo[...]

- 16 - EN 9I03 5 Exit the V -Chip setting mode Press the MENU button on the remote control to enter the setting and exit the screen. V -CHIP SET UP SUB RA TINGS When you select the ratings of TV -Y7,TV -PG,TV -14 or TV -MA you will have the option of selecting sub rating categories. 1 Select “V -CHIP SET UP” Press the MENU button on the remote [...]

- 17 - EN 9I03 PLA YBACK INSERTING A CASSETTE Insert the cassette in the direction as shown. Push in gently , but continuously , on the center-back of the cassette until it is drawn into the TV/VCR. The TV/VCR will automatically turn on. CORRECT Window WRONG This TV/VCR will operate with any cassette that has the mark. For best results, we recommen[...]

- 18 - EN 9I03 PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)Y ou may view a video tape at a high speed in either a forward or reverse direction by pressing the F .FWD or REW button during playback (in the SP / LP / SLP modes). 2)Press it again and the T[...]

- 19 - EN 9I03 TIME SEARCH The T ime Search function makes it possible to quick- ly advance the tape to your desired position simply by entering the exact amount of playback time you want to skip. NOTES: • T ime Search can be set up to a maximum of 9 hours 50 minutes (9:50) by 10 minutes at a time. • This function will not operate in recording [...]

- 20 - EN 9I03 Make sure ... • TV/VCR power is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONL Y record and view the same channel. RECORDING ERASE PREVENTION Y ou can prevent acciden- tal erasi[...]

- 21 - EN 9I03 A void overlap of programs ... There is a chance that a program will not be record- ed. When programs overlap: • The program with the earliest start time will record first. • Once the earliest program finishes recording, the overlapping programs will record in the order of the program number . • The illustration below demonstra[...]

- 22 - EN 9I03 For every day recording : To r ecor d a TV pr ogram at the same time on the same channel every day . (Example: Monday thr ough Sunday) Press the STOP/ L (down) but- ton until “EVR Y DA Y” appears. Then, press the F .FWD/ B but- ton. For weekly recording : To r ecor d a TV pr ogram at the same time on the same channel every week. [...]

- 23 - EN 9I03 TO CANCEL AN AUTOMA TIC TIMER RECORDING • After setting a pr ogram; 1)Press the POWER button. 2)Repeat steps [1] ~ [2] under TIMER RECORD- ING, page 21, and select a program you want to cancel. 3)Press the T -PROG. CLEAR button. 4)Press the MENU button on the remote control to return to TV mode. • While recording is in pr ogress;[...]

- 24 - EN 9I03 2 Select “TV” or “T APE” Press the PLA Y/ K or STOP/ L but- ton until it points to “TV/T APE”. Press the F .FWD/ B or REW/ s button, and select [TV] or [T APE]. 3 Set wake up time Press the PLA Y/ K or STOP/ L but- ton until it points to “TIME”. Press the F .FWD/ B or REW/ s button until your desired wake up time appe[...]

- 25 - EN 9I03 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in luke- warm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD CLEANING • Au[...]

- 26 - EN 9I03 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM CORRECTIVE ACTION No power . • Make sure the AC cord is connected to an AC o[...]

- 27 - EN 9I03 SPECIFICA TIONS GENERAL SPECIFICA TIONS CR T : 13 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M Closed caption system : §15.1 19/FCC V ideo Heads : Rotary four-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec. T uner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 TV[...]

- 28 - ES 0I29 4 Botones de v olumen (V OLUME X X / Y Y )– Ajustan el nivel del volumen. 5 Botones de canales (CHANNEL K / L )– Púlselos para seleccionar los canales deseados para ver o grabar . Se puede mostrar el menú principal en la pantalla del televisor pulsando repetidamente este botón del tele- visor/videograbadora. Función de seguim[...]

- 29 - ES 0I29 con rebobinado) Botón s – • Púlselo para seleccionar un modo desde un menú- particular . (Por ejemplo: IDIOMA o ADJUST DE USER) 9 Botón de reproducción (PLA Y)– Púlselo para iniciar la reproducción. Botón K – • Púlselo para seleccionar los modos de ajuste desde el menú de la pantalla. • Púlselo para introducir [...]

- 30 - ES 0I29 CONEXIONES DE ANTENA/CABLE ANT. IN OUT ANT . Antena de varilla UHF/VHF (incluído) Antena combinada de VHF/UHF (no incluído) Combinador de VHF/UHF (no incluído) Cable bifilar plano Antena UHF (no incluído) Antena VHF (no incluído) Desde el sistema de Cable Cable coaxial de 75 ohm (no incluído) Caja de CA TV o caja de emi- siones[...]

- 31 - ES PREP ARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar . NOT A: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin des- enchufar el cable de alimentación. 2) Pulse el botón POWER para encender el televi- sor/videograbadora. [...]

Printed in Malaysia 0EMN02084 T5408UJ * * * * * Sears Roeb uck and Co., Dept. 817W A Hoffman Estates, IL 60179 For the location of a Sears Service Center in y our area : 1-800-488-1222 R egistered Trad emark / TM Tra demark / SM Se rv ice Mark of Sears, Roebuck and Co. Ma rca R egistrada / TM Ma rca de Fábrica / SM M arca de Servicio de Sears, Roe[...]