Sylvania W6313CC manual

13-INCH COLOR TV/VCR W6313CC O WNER’S MANU AL As an E NERGY S TAR Partner, our company has determined that this product meets the E NERGY S TAR guidelines for energy efficiency. E NERGY S TAR is a U.S. registered mark. ® ® ® If you need additional assistance f or set-up or operating after reading owner’ s manual, please call T OLL FREE : 1-8[...]

1.Read instructions- All the safety and operating instructions should be read before the appliance is operated. 2.Retain Instructions- The safety and operating instructions should be retained for future reference. 3.Heed W arnings -All warnings on the appliance and in the operating instructions should be adhered to. 4.Follow Instructions- All opera[...]

- 3 - EN 01A1 1 13.Outdoor Antenna grounding- If an outside antenna or cable system is connected to the TV/VCR, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFP A No. 70, provides information with respect to prop[...]

AV OID THE HAZARDS OF ELECTRICAL SHOCK AND FIRE This equipment has been tested and found to com- ply with the limits for a Class B digital device, pur- suant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radi[...]

- 5 - EN 01A1 1 T ABLE OF CONTENTS A NOTE ABOUT RECYCLING This product’ s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regula- tions concerning chemical wa[...]

- 6 - EN 01A1 1 FEA TURES • Infrared remote control • Bilingual on screen menu displa y selectable in English or Spanish • Real time counter– This shows the elapsed record- ing or playback time in hours, minutes, and sec- onds. The “–” indication will appear when the tape is rewound further than the tape counter position “0:00:00”[...]

- 7 - EN 01A1 1 OPERA TING CONTROLS AND FUNCTIONS - TV/VCR FRONT P ANEL - 1 VIDEO input jack– Connect to the video output jack of your video camera or another VCR. 2 A UDIO input jack– Connect to the audio output jack of your audio equipment, video camera or another VCR. 3 PO WER button– Press to turn TV/VCR on and off. Press to activate time[...]

- 8 - EN 01A1 1 - REAR VIEW - ANT . 28 27 8 REW button– Press to rewind the tape, or to view the picture rapidly in reverse during playback mode. (Rewind Search) s b utton– • Press to select a mode from a particular menu. (for example: LANGUAGE or USER’S SET UP) 9 PLA Y button– Press to begin playback. K b utton– • Press to select set[...]

- 9 - EN 01A1 1 PREP ARA TION FOR USE ANTENNA/CABLE CONNECTIONS VHF/UHF COMBINED ANTENNA The VHF/UHF Rod Antenna (supplied) is detach- able. Insert the stem of the antenna into the hole on the upper-back portion of the TV/VCR.Connect the VHF/UHF Rod Antenna or VHF/UHF Combination Antenna to the ANT . terminal of the TV/VCR as shown in the diagram. [...]

- 10 - EN 01A1 1 INST ALLING THE BA TTERIES 1)Open the battery compartment cover by pressing the cover on the remote unit in the direction of the arrow . 2)Insert 2 “AA” penlight batteries into the battery compartment in the direction indicated by the polarity (+/-) markings. 3)Replace the cover . SET UP FOR USE Y ou can program the tuner to sc[...]

- 11 - EN 01A1 1 CLOCK SET UP (AUTO / MANUAL) Make sure ... • TV/VCR power must be turned on. • Confirm that the antenna connections are correct. • The cable converter box must be turned on if your TV/VCR is connected directly to it. (See NOTES:) • The channel is properly set in advance. NOTES: • Auto clock setting only needs to be set on[...]

- 12 - EN 01A1 1 DELETING (OR ADDING) CHANNEL CHANNEL SET UP AGAIN Make sure ... • Press the POWER button to turn on the TV/VCR. 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Begin auto preset Press the PLA Y/ [...]

- 13 - EN 01A1 1 1 Select “CHANNEL SET UP” Press the MENU button on the remote control. Press the PLA Y/ K or STOP/ L but- ton to point to “CHANNEL SET UP”. Then, press the F .FWD/ B button. 2 Select “ADD/DELETE CH” Press the PLA Y/ K or STOP/ L but- ton to point to “ADD/DELETE CH”. Press the F .FWD/ B button. 3 Enter the desired ch[...]

- 14 - EN 01A1 1 TV OPERA TION WA TCHING A TV PROGRAM 1 T urn on the TV/VCR Press the POWER button to turn on the TV/VCR. 2 Select the channel number Press the CHANNEL K or L button to select your desired channel number or press the number buttons on the remote control. Remember: If the TV/VCR is connected to a cable box or satellite box, the TV/VC[...]

- 15 - EN 01A1 1 CLOSED CAPTION SYSTEM Y ou can view specially labeled (cc) TV programs, movies, news, pre-recorded tapes with either a dia- logue caption or text display . CAPTION mode: By choosing the caption mode, you can watch dramas, movies and news while captioning the dialogues and the contents of news. TEXT mode: By choosing the text mode, [...]

- 16 - EN 01A1 1 3 Select your desired item Press the PLA Y/ K or STOP/ L but- ton to point to your desired item. Then, press the F .FWD/ B button to select [BLOCK] or [VIEW]. • When you select the rating category and turn it [BLOCK], the higher rating will turn [BLOCK] automatically . Also, the lower rating will turn [VIEW] automatically . • W[...]

The TV/VCR has an auto repeat function that allows you to repeat a tape indefinitely without touching the PLA Y button. ALL REPEA T : Repeat playback from the beginning to the end of the tape. BLANK REPEA T : Repeat playback from the begin- ning to a blank part of more than 10 seconds. 1 Select “USER’S SET UP” Press the MENU button on the rem[...]

- 18 - EN 01A1 1 PICTURE SEARCH This feature is very useful in finding or skipping over a particular scene on a tape. In this mode, the sound will be muted. 1)Y ou may view a video tape at a high speed in either a forward or reverse direction by pressing the F .FWD or REW button during playback (in the SP / LP / SLP modes). 2)Press it again and the[...]

- 19 - EN 01A1 1 STILL PICTURE Y ou can view a still picture on the TV screen during playback (the Still mode). Press the P AUSE/STILL button during playback. Only tapes recorded in the SLP mode will show the least amount of lines. Press the PLA Y button to return to playback. NOTES: • Usually there will be video “noise” lines (black and whit[...]

- 20 - EN 01A1 1 Make sure ... • TV/VCR power is turned on. • Insert a cassette tape with its erase prevention tab in place. (If necessary , rewind or fast forward the tape to the point at which you want to begin recording.) NOTE: This unit will ONL Y record and view the same channel. Y ou can ONL Y watch the same TV program that is being recor[...]

- 21 - EN 01A1 1 3 Begin O TR Press the REC/OTR button on the TV/VCR as many times as needed. The recording length will be deter- mined by the number of times you press the REC/OTR button. Each additional push will increase the recording time by 30 minutes. It is set up to 8 hours. OTR(2 : 30) SP A void overlap of programs ... There is a chance tha[...]

- 22 - EN 01A1 1 3 Set the channel number Press the PLA Y/ K or STOP/ L but- ton until the desired channel num- ber appears. (Example: CH61) Then, press the F .FWD/ B button. Remember: If your TV/VCR is connected to a cable or satellite box, you must set the TV/VCR to channel 3 or 4 to match the output channel of the box. 4 Select once, every day o[...]

- 23 - EN 01A1 1 TO CORRECT A PROGRAM • While setting a program; press the REW/ s but- ton to go back one step and enter the correct num- bers using the PLA Y/ K or STOP/ L button. • After setting a pr ogram; 1)Press the POWER button. 2)Repeat steps [1] - [2] on page 21. 3)Press the F .FWD/ B button (or press the REW/ s button to go back one st[...]

- 24 - EN 01A1 1 1 Select “W AKE UP TIMER” Press the W AKE-UP/SLEEP button on the remote control once, and confirm “ON/OFF” is pointed. Press the F .FWD/ B or REW/ s button until [ON] appears. 2 Select “TV” or “T APE” Press the PLA Y/ K or STOP/ L but- ton until it points to “TV/T APE”. Press the F .FWD/ B or REW/ s button, and [...]

- 25 - EN 01A1 1 CABINET CLEANING • W ipe the front panel and other exterior surfaces of the TV/VCR with a soft cloth immersed in luke- warm water and wrung dry . • Never use a solvent or alcohol. Do not spray insec- ticide liquid near the TV/VCR. Such chemicals may cause damage and discoloration to the exposed surfaces. AUTO HEAD CLEANING • [...]

- 26 - EN 01A1 1 TROUBLESHOOTING GUIDE If you have followed the instructions contained in this manual and have difficulty in operating your TV/VCR, locate the PROBLEM in the left column below . Check the corresponding CORRECTIVE ACTION column to remedy the problem. PROBLEM CORRECTIVE ACTION No power . • Make sure the AC cord is connected to an AC[...]

- 27 - EN 01A1 1 SPECIFICA TIONS GENERAL SPECIFICA TIONS CR T : 13 inch in-line gun, 90˚ deflection tube T elevision system : NTSC-M Closed caption system : §15.1 19/FCC V ideo Heads : Rotary two-head T ape width : 1/2 inch T ape speed SP : 33.40mm/sec. LP : 16.67mm/sec. SLP : 1 1.12mm/sec. T uner channel TV VHF Low : #2~#6 TV VHF High : #7~#13 T[...]

- 28 - ES 01A1 1 1 T oma de entrada de vídeo (VIDEO)– Conéctela a la toma de salida de vídeo de su videocámara u otra videograbadora. 2 T oma de entrada de audio (AUDIO)– Conéctela a la toma de salida de audio de su equipo de audio, videocámara u otra videograbadora. 3 Botón de la alimentación (PO WER)– Púlselo para encender y apagar[...]

- 29 - ES 01A1 1 ANT . 28 27 • Púlselo para introducir dígitos cuando establezca un programa. (Por ejemplo: Para ajustar el reloj o establecer un pro- grama de temporizador) 10 Botón de av ance rápido (F .FWD)– Púlselo para avanzar rápidamente la cinta, o para ver la imagen en avance rápido durante el modo de reproducción. (Búsqueda co[...]

- 30 - ES 01A1 1 CONEXIONES DE ANTENA/CABLE ANT. IN OUT Antena de varilla UHF/VHF (incluído) Antena combinada de VHF/UHF (no incluído) Combinador de VHF/UHF (no incluído) Antena UHF (no incluído) Antena VHF (no incluído) Desde el sistema de Cable Cable coaxial de 75 ohm (no incluído) Caja de CA TV o caja de emi- siones vía satélite (no incl[...]

- 31 - ES 01A1 1 PREP ARACIÓN DE CANALES POR PRIMERA VEZ 1) Enchufe el cable de alimentación del televisor/videograbadora en una toma de CA estándar . NOT A: Si aparezcan algunos digitos en el rincón de la pantalla, pulse el botón POWER sin desenchufar el cable de alimentación. 2) Pulse el botón POWER para encender el televisor/videograbador[...]

LIMITED W ARRANTY FUNAI CORP . will repair this SYL V ANIA product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURA TION: PA R TS: FUNAI CORP . will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. T wo (2) years for Picture T ube. Certa[...]