Toshiba DP-1810 manual

MUL TIFUNCTIONAL DIGIT AL SYSTEMS Operator's Manual for Copying Functions[...]

[...]

Preface 1 Preface Thank you for purchasing the T OSHIB A multifunctional digital systems. We have provided you with this manual for the operation of this equi pment. This operator ’s manual describ es the following: y How to use this equipment y How to inspect and carry out mainte nance on this equipment y How to remedy mechanical and copying pro[...]

2 Notice to Users Notice to Users FCC NOTICE This equipment has been tested and found to comply with the limi ts for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against har mful interference when the equipment is operated in a commercial environment. This eq uipment gene[...]

Before Reading This Manual 3 Before Reading This Manual T o read manuals in the PDF file format This manual is stored in PDF (Portable Document Format) in the co-packed User Documenta- tion CD-ROM. The operator ’s manual in the PDF can be displayed/printed using Adobe Reader or Adobe Acrobat Reader . If neither is installed in your computer , dow[...]

4 Before Reading This Manual Description of original/p aper direction Paper or originals of L T size can be placed either in a portrait directio n or in a landscape direc- tion. In this manual, “-R” is added to this paper size when this size of paper or original is placed in a landscape direction. e.g.) L T size origi nal on the original glass [...]

CONTENTS 5 CONTENTS Preface ............... ................ ............. ................ ................ ................ ............... 1 Notice to Users .............. ................ ................ ................ ................ ............. .. 2 Before Reading This Manual .................. ................... ................ .....[...]

6 CONTENTS Chapter 3 COPYING FUNCTIONS Default Settings ................ ................ ................ ................. ................ ......... 52 Paper Selection ....... .......... ................ ............. ................ ................ ............. 53 Automatic paper selection (APS)...... .... ................ ................ .[...]

CONTENTS 7 Chapter 6 MAINTENANCE AND INSPECTION Daily Inspection ............. ................ ................... ................. ................ ......... 96 Cleaning charger ..... ................ ................ ................ ................ ................ 97 Cleaning transfer charger . ................ ............. ................[...]

8 CONTENTS[...]

TOSHIBA Quality Is Second t o None 9 TOSHIBA Quality Is Second to None Recommended toner cartridges T o assure optimal printing perfo rmance, we recommend th at you use only gen uine TOSHIBA toner cartridges. If you use a TOSHIBA-recommended toner cartridge, you can utilize the following three fu nc- tions of this equipment: Cartridge detect ing fu[...]

10 TOSHIBA Quality Is Second to None Supplies / Part s Dependability Genuine TOSHIBA supplies are subjected to the stri ctest of inspections so that every supply you receive will perform at optimal level s. High Productivity Genuine TOSHIBA supplies are created to meet the demands of our competitive world and pro- vide high-speed reliable copies wh[...]

General Precautions 11 General Precautions When inst alling or moving Wa r n i n g y This equipment requires 1 15 V , 12 A, 50/60 Hz electric power. Do not use a power supply with a voltage other than that specified. Avoid multiple connections in the same outlet. This cou ld cause a fire or give you an electric shock. If you are considerin g increa[...]

12 General Precautions Caution y Avoid placing the equipment in a place unsuitable for its weight and also make sure the sur- face is level. Remember that if the equipment falls o ver , seriou s injuries could resul t. Weight of the equipment: approx. 70.1 lb. y When removing the plug from the outlet, do not pull th e power cable. Always hold the p[...]

General Precautions 13 When using the equipment Wa r n i n g y Do not take off the cover of the equipment; othe rwise you coul d be injured or get an electric shock. y Do not remove or connect the plug with wet hand s, as this could give you an electric shock. y Do not place any container with liquid (flower vases, coffee cups, etc.) on or near the[...]

14 General Precautions Position of Certification label, etc. Certification label Explanatory label Identification label W arning label W arning for high-temperature areas ( fuser unit ) W arning for high-temperature areas ( ventilation holes )[...]

General Precautions 15 Other point s y Do not turn the power OFF with jammed paper left inside the equipment. This could cause malfunctions when the main switch is turned ON next time. y Be sure to turn the power OFF when leaving the office or if there is a power failure. y Be careful because the paper exit area and paper just af ter exiting are ho[...]

16 General Precautions First-aid measures If you inhale or touch toner , etc; carr y out the following treatment. y Inhalation: Remove from exposure area to fresh air immediately . Contact a physician if there is any difficulty in breathing or other signs of distress. y Skin Contact: W ash with soap and water . Wash clothi ng before reuse. If irrit[...]

Disclaimer Notice 17 Disclaimer Notice The following noti ce sets out the exclusions a nd limitations of liability of T OSHIBA TEC CORPO- RA TION (including its employees, agents and sub-co ntractors) to any purchas er or user (‘User ’) of the e-STUDIO181, including its accessories, options and bundled software (‘Product’). 1. The exclusion[...]

18 Environmental Information Environment al Information ENERGY ST AR ® Prog ram T oshiba T ec Corporation, as a member of the ENERGY ST AR Program, att aches the ENERGY ST AR log o to all products which meet the ENERGY ST AR Program requirements. The ENERGY ST AR Program aims at the promot ion of the development and wid er usage of office equipmen[...]

1. PREP ARA TION This chapter describes what you need to know before us in g this equipment, such as how to turn the power ON or how to set copy paper . Description of Each Component ........................................................ ................... 20 Front / Right side .......... .............. .............. ........... .............. [...]

1 PREP ARA TION 20 Description of Each Component Description of Each Component Front / Right side 1. Platen Cover (optional, KA-1650 PC) Place an original on the original glass and start copying with this cover closed. 2. Automatic Document F eeder (optional, MR -2020) A stack of originals placed on this are scanned one sheet after another . Maximu[...]

Description of Each Component 21 9. Drawer Maximum 250 sheets of plain paper can be placed in one go. 10. Front cover Open this cover when you replace the toner cartridge.  P .85 “Replacing T oner Cartridge” Lef t side / Inner side 1. Original glass Use this to copy three -dimensional originals, book-type originals and specia l paper such as[...]

1 PREP ARA TION 22 Description of Each Component 7. USB terminal (4-pin) With this terminal, the equipment can be connected to your PC using a commercial ly avail- able USB cable. y Use a USB2.0 Hi-S peed certifi ed cable: USB cable supportin g the USB2.0 Hi-Speed mode (480 Mbps of transfer speed) ce rtified by the USB Implementers Forum. y Connect[...]

Description of Each Component 23 Configuration of options The options listed below are ava ilable. Contact your service technician or service repre sentative for the details. Platen Cover ( KA-1650PC ) Automatic Document Feeder ( MR-2020 ) Expansion Memory ( GC-1240 ) Main body Paper Feed Unit ( MY -1027 ) Desk ( MH-1640 )[...]

1 PREP ARA TION 24 Description of Each Component Control p anel 1. [SORT] button/lamp Use this to use the sorting func tion.  P .61 “Copying in Same Page Order as Originals - Sort Copying -” 2. Media type setting button/lamp s Use this button to switch the media type of paper placed on the bypass tray .  P .48 “Usin g Bypass T ray” 3.[...]

Description of Each Component 25 8. [INTERRUPT] button/lamp Use this to interrupt the copy job in proces s and perform a nother one (= interrupt copying ). For the details of interrupt copying, see the following page:  P .47 “Interrupting copying and making another copy - Interru pt copy -” 9. [ENERGY SA VER] button/lamp Use this to let the [...]

1 PREP ARA TION 26 Description of Each Component - When the originals need to be placed on the Automatic Document Fe eder (optional) (When a paper jam in the Automatic Document Feeder is relea sed) - When the Automatic Document Feeder (optional) on which the orig inals are placed is raised. 19. [COPY] button/lamps Use this button to select the size[...]

Preparation 1 - Turn ing Power ON 27 Prep aration 1 - T urning Power ON T urning power ON 1 Press the power switch to “ ” (ON) side. The equipment starts warming itself up. The warm-up time takes approx. 25 seconds. When the warm-up has finished, the [ST ART] la mp is lit to show th at the equipment is ready for copying. If you press the [ST AR[...]

1 PREP ARA TION 28 Preparation 1 - Turning Power ON Saving energy when not in us e - Energy saving mode - T o reduce power consumption, the e quipment automatically enters in to the energy saving mo de when a specified pe riod of time has passed since its last use. Y ou can also turn the equipment into this mode manually . T yp es of energy saving [...]

Preparation 1 - Turn ing Power ON 29 Super sleep mode y When the [ENERGY SA VER] button on the control panel is pressed y When the Platen Cover (optional) or the Automatic Document Feede r (optional) is raised If this equipment is connected to your PC with a USB cable, change the setting so that it does not enter the super sleep mode.  P .70 “[...]

1 PREP ARA TION 30 Preparation 2 - Placing Copy Paper Prep aration 2 - Placin g Copy Paper Place copy paper in an appropriate paper source before you start copying. Accept able media types S tandard size pla in paper (17 to 20 lb. Bond) can be used fo r the drawers in the equi pment and the Paper Feed Unit (optional). S ee th e table below for the [...]

Preparation 2 - Placing Copy Paper 31 Recommended p aper T o ensure the best copy performance, TOSHIBA recommends the paper types listed below . If you want to use paper other than that we recommend, contact your service technician. *1 Be sure to use the overhead transparencies that TOSHIBA recommends. When transparencies other than the TOSHIBA-rec[...]

1 PREP ARA TION 32 Preparation 2 - Placing Copy Paper Placing p aper in drawers Follow the procedure below to place copy paper in the drawer . For the acceptable paper , see the following page:  P .30 “Acceptable media types” 1 T urn the power of the equipment ON. 2 Pull out the drawer carefully . Pull out the drawer until it comes to a stop[...]

Preparation 2 - Placing Copy Paper 33 4 Pull out the trailing guide (A), and then reinst all the guide at the position of the desired p aper size. The paper size is indicated on the botto m inner surface of the drawer . 5 While pushing the green knob of the side gui des fully , widen the gap between them. Widen the gap with both hands. A[...]

1 PREP ARA TION 34 Preparation 2 - Placing Copy Paper 6 Place p aper in the drawer . y The maximum number of she ets that can be placed at one time is 250 (17 to 20 lb. Bond). Be sure that the stack height of paper is not higher than the line indicated at the inner side of the side guide and trailing guide.  P .30 “Acceptable media types” y [...]

Preparation 2 - Placing Copy Paper 35 8 Be sure that the st ack of pa per fit s completely under the latches of the side guides. 9 Change the p aper size indicator to match the size of p aper placed. 10 Push the drawer straight into the equipment slowly until it comes to a stop. Do not let your fi ngers be caug ht when closing the drawer . This cou[...]

1 PREP ARA TION 36 Preparation 3 - Registering Size of Paper Placed Prep aration 3 - Registering Size of Paper Placed When you place paper in a drawer for the first time or when you place paper whose size is differ- ent from that of the p aper which has been placed in the draw er , the new paper size needs to be registered into the equipment. Regis[...]

Preparation 3 - Register ing Size of Paper Placed 37 3 Press the [COPY] button several times until th e lamp of the p aper size you placed in the drawer is lit. If the [FUNCTION CLEAR] button is pressed at th is step, the size is not registered and the equipm ent will retu rn to it s normal st atus. 4 Press the [ST ART] button. The paper size has b[...]

1 PREP ARA TION 38 Preparation 3 - Registering Size of Paper Placed 2 Press the [DRA WER] button several times until the lamp of the drawer in which you placed p aper is lit. 3 Press the [COPY] button severa l times until the [OTHER] lamp is lit. “Fxx” appears in the LED display . (T wo digits come at “xx”.) 4 Key in the code number of the [...]

2. HOW T O MAKE COPIES This chapter describes basic copy operations . Placing Originals.................................................. ...................................................40 Acceptable originals ........................ .............. .............. .............. .............. .............. ............. ............... 40 Plac[...]

2 HOW TO MAKE COPIES 40 Placing Originals Placing Originals Accept able originals Booklets, three-dimensional objects and some types of special media can be pla ced on the orig- inal glass, as well as plain paper . When the Au toma tic Document Fee der (optional) is u sed, a stack of plain paper originals can be automatically scanned one by one. *1[...]

Placing Originals 41 Placing originals on the original glass Plain paper or some special media types which are not acceptable for the Automatic Document Feeder (optional), such as overhea d transparenci es or tracing paper , should be placed on the original glass. Do not place heavy objects (9 lb. or more) and do not press on it with force. Breakin[...]

2 HOW TO MAKE COPIES 42 Placing Originals Placing booklet-type original s such as books or cat alogs Place a book-type original on the origina l glass. Do not place heavy objects (9 lb. or more) and do not press on it with force. Breaking the glass could injure you. 1 Raise the Platen Cover (optional) o r the Automatic Document Feeder (optional). 2[...]

Placing Originals 43 Using Automatic Docume nt Feeder (optional) When a stack of originals are placed on the Automatic Document Feeder (op tional), the originals are automatically scanne d one by one. The following types of origin als are available: y Some media types may not be used. y The maximum number of sheets acceptable va ries depending on t[...]

2 HOW TO MAKE COPIES 44 Placing Originals Placing originals on Automatic Document Feeder (optional) 1 Align all the originals. 2 Place them face up and align the side gu ides to the original length. y The top sheet of the originals will be scanned first. y The total sheets of originals placed must not exceed 100 (13.3 to 20 lb.) or the stack height[...]

Making Copies 45 Making Copies Follow the procedure below to make co pies. The reproduction rati o or densit y of the copie d image can be set. See the following page for the details:  P . 51 “COPYING FUNCTIONS” 1 Check if p aper is placed in the drawer . For the acceptable types and sizes of paper , see the following pages:  P .30 “Acc[...]

2 HOW TO MAKE COPIES 46 Making Copies When the number of sheet s exiting has exceeded 250 T o prevent exitin g paper from falling off the re ceiving tray , the equipment causes copying to pause when approx. 250 sheets of p a per have co ntinuously exited. At this time the [ST ART] lamp is lit and the [FUNCTION CLEAR] lamp bl inks on the control pan[...]

Making Copies 47 Interrupting copying an d making another copy - Interrupt copy - Y ou can interrupt copying of one jo b and make a nother copy job (= i nterrupt copying). The copy quantity or functions applied to t he interrupted job are stored in the memory of thi s equipment, so that you will not need to set them again when the interrupted job r[...]

2 HOW TO MAKE COPIES 48 Using Bypass Tray Using Byp ass T ray Place paper on the bypass tray when you use the following media types as copy paper: y Thick paper (21 lb. Bond to 90 lb. Index) y S pecial media types such as tracing paper , sti cker labels or overhead transparencies y S tandard size paper which cannot be placed in a drawer (e.g . ST -[...]

Using Bypass Tray 49 Byp a ss copying This section describe s the bypass copying procedure. 1 Place p aper straight on the bypass t ray face down. Then align the side guides to the p aper length while holding (A). y Be sure that the stack height of paper does not exceed the indicators of th e side guides. y Fan the stack of paper well before placin[...]

2 HOW TO MAKE COPIES 50 Using Bypass Tray 3 Press the [ST ART] button. The paper size has been registered. 4 Press the media type setting button until the lamp of the me dia type placed on the byp ass tray is lit. Y ou can select the me dia type from the following three: THICK P APER 1 : Thick paper (21 to 28 lb. Bond) THICK P APER 2 : Thick paper [...]

3. COPYING FUNCTIONS This chapter describes various functions related to copy operations, such as how to make enlargement or reduction copies, or ho w to adjust the quali ty of copy images. Default Settings............................................................... ........................................52 Paper Selection .....................[...]

3 COPYING FUNCTIONS 52 Default Settings Default Settings Initial settings established when the equipment is powered on before any of the user functions are changed are called default settin gs. Each setting returns to its default when the power is turned ON, when the energy saving mode is canceled, and when th e [FUNCTION CLEAR] but- ton is pressed[...]

Paper Selection 53 Paper Selection Y ou can select the size of copy paper in two ways; one is automat ic paper selection in which the equipment automatically selects copy paper of th e same size a s the original, and the other i s manual paper selection in which you can select the desired paper size manually . Automatic p aper selection (APS): The [...]

3 COPYING FUNCTIONS 54 Paper Selection 3 Press the APS/AMS selecting button and selec t APS. (The APS lamp is lit.) When the Automatic Document Feeder (optional) is not in stalled, the APS/AMS selecting button is no t enabled. 4 Select the other copy modes as required, and the n press the [ST ART] button. Manual p aper selection Select the paper si[...]

Paper Selection 55 3 Press the [DRA WER] button several times until the lamp of the desired drawer is lit. e.g.) Selecti ng the drawer of the equipmen t 4 Select the other copy modes as required, and the n press the [ST ART] button.[...]

3 COPYING FUNCTIONS 56 Zooming In/Out Copy Image Zooming In/Out Copy Image Y ou can set the reproducti on ratio of the copy image in the following three ways: Automatic magnification selection (AMS): S pecify the size of the copy paper in advance. As the original is placed, the equipment then detects the size of the original and sets the repr oduct[...]

Zooming In/Out Copy Image 57 1 Place p aper in the drawer . 2 Press the [COPY] button several times until the lamp of the desired p aper size is lit. e.g.) Selecting L T size Y ou can select the desired paper size with the [DRA WER] button in the same procedure. 3 Press the APS/AMS selecting button until the AMS la mp is lit. 4 Place the original o[...]

3 COPYING FUNCTIONS 58 Zooming In/Out Copy Image Specifying both the sizes of the original and the copy p aper 1 Place p aper in the drawer . 2 Place the original. 3 Press the [ORIGINAL] button several times until the lamp of the desired original size is lit. e.g.) Selecting LG for the origi nal 4 Press the [COPY] button several times until the lam[...]

Zooming In/Out Copy Image 59 Specifying reproduction ratio manually 1 Place p aper in the drawer . 2 Place the original. 3 Press the Copy qty . / zoom display selecting button. The reproduction ratio appears on the LED display . 4 Press the (zooming out) or (zooming in) button until the desired reproduction ratio appears. One press of each button i[...]

3 COPYING FUNCTIONS 60 Zooming In/Out Copy Image 5 Press the [COPY] button several times until the lamp of the desired p aper size is lit. e.g.) Selecting L T for copy paper y Y ou can select the desired paper size with the [DRAWER] button in the same pro ce- dure. y When standard size paper other than LD, L T , L T -R, LG or ST -R is pla ced, regi[...]

Copying in Same Page Order as Or iginals - Sort Copying - 61 Copying in Same Page Order as Originals - Sort Copying - When you make severa l sets of copies, the cop ies can be made to exit in the same order as the originals in each set. This is called sort copying. 1 Place p aper in the drawer . 2 Place the original. When originals are placed on th[...]

3 COPYING FUNCTIONS 62 Copying in Same Page Order as Originals - Sort Co pying - 4 Set the copy quantity , select other copy modes as required, and then press the [ST ART] button. When the origina l is placed on the Au tomatic Docu ment Feeder (optional), copying start s. When the origina l is placed on the original glass, it is scanned , the [SORT[...]

Copying Both Sides of Card into 1 Page - ID CARD - 63 Copying Both Sides of Card into 1 Page - ID CARD - The both sides of a card-sized original can be copi ed into one side of L T paper . This function is useful when you ne ed to copy massive a mounts of 2-sided cards. 1 Place p aper in the drawer . Place L T or L T -R size paper in the drawer or [...]

3 COPYING FUNCTIONS 64 Copying Both Sides of Card into 1 Page - ID CARD - 4 Place a card original on the original glas s. Place the card face down, aligning a nd pushing it to the left rear corner of the original glass. The portion of an origin al which is on the uppe r and left edges (width of approx. 0.08") of the original glass may not be c[...]

Selecting Image Mode 65 Selecting Image Mode Y ou can select the most suitab le quality of the copied image in the following three modes depending on the originals: TEXT/PHOTO : Originals with text and pho tographs mixed PHOTO : Originals with photographs TEXT : Originals with text only or with text an d fine illustrations only “TEXT/PHOTO” is [...]

3 COPYING FUNCTIONS 66 Adjusting Density Level Adjusting Density Level The automa tic copy density mo de, which automatically selects the mo st suitable density level for the copied image by detecting th at of the original , is set by de fault at the installation of the equip- ment. Y ou can also adjust the densi ty level as desired ma nually (=man[...]

4. SETTINGS AND MANAGEMENT OF EQUIPMENT This chapter describes how to switch the operation sound ON or OFF , how to check the total number of sheets you have copied and how to switch the energy saving mode. Switching Operation Sound On/Off.......................................................................68 Checking T ot al Number Copied ......[...]

4 SETTINGS AND MANAGEMENT OF EQUIPMENT 68 Switching Operation Sound On/Off Switching Operation Sound On/Off Y ou can switch the operation sound of the equipment on or o ff. 1 Press and hold the (light) and (dark) button s simult a- neously for more than two seconds. “Fnc” appears on th e LED display . The density adjustment lamps show the sound[...]

Checking Total Number Copied 69 Checking T otal Number Copied Y ou can check the total number of sheets ever c opied or printed. The total number of sheets appears on the LED display . 1 Press and hold the button for more than two seconds. The upper digits of the total number appear on the LED display . The total number is shown blinking. e.g.) The[...]

4 SETTINGS AND MANAGEMENT OF EQUIPMENT 70 Changing of the Enabled Energy Saving Mode Changing of the Enabled Energy Saving Mode The settings of the enabled energy saving mo de and auto sleep time (time until entering the mode) can be ch anged. 1 Press and hold the button for more than two seconds. The present mode name (Sleep mode: SLP or Super sle[...]

5. TROUBLESHOOTING This chapter describes how to release a paper jam, how to replace a toner cartridge and how to settle other trouble. When Message Lamp is Lit/Blinkin g .....................................................................72 Paper Jams ...................................... ..................................................... ...[...]

5 TROUBLESH OOTING 72 When Message Lamp is Lit/Blinking When Message Lamp is Lit/Blinking Message lamps on the control panel are lit or blink dep ending on the status o f the equipment. Each lamp shows the foll owing status: 1. Cover open lamp This blinks when any cover of the equipment, such as the front cover , the side cover or the upper cover o[...]

When Message Lamp is Lit/Blinking 73 T o assure an optimal printing performance, we recommend that you use only TOSHIBA toner cartridges. 4. Paper jam lamp This blinks when an original or a sheet of copy paper is jammed. For how to release paper jams, see the following page:  P .75 “Paper Jams” Recommended toner cartridges T o assure optimal[...]

5 TROUBLESH OOTING 74 When Message Lamp is Lit/Blinking 5. Service call lamp This is lit or blinks when the support of your service technician is needed. Contact your ser- vice representative. When the key of the digital keys and the [CLEAR/STOP] button are pressed simulta- neously , an error code (consisting of a letter of the alphabet an d number[...]

Paper Jams 75 Paper Jams Checking position of p a per jams When an original or a sheet of copy paper has jammed within the equipment, copying stops and the paper jam lamp blinks. Additionally , the paper jam positio n lamp blinks to show you wh ere the paper jam has occurred. Check the position and release the jammed paper . 1. Automatic Document F[...]

5 TROUBLESH OOTING 76 Pape r Jams When releasing jammed p aper Observe the following precauti ons when you release jammed paper: Do not tear jammed p aper . Pull out jammed paper carefully with both hands, trying not to tear it. If you release it forcibly , the jammed paper will be torn and it will make the release difficult. If it is torn, be sure[...]

Paper Jams 77 2 Open the reverse cover , and remove the original. 3 Close the Automatic Doc ument Feeder . 4 Raise the lever , and open the upper cover .[...]

5 TROUBLESH OOTING 78 Pape r Jams 5 Raise the original feeder tray , and remove the original under the tray . 6 Lower the original feeder tray . 7 Close the upper cover . Paper jams within Automatic Document Feeder (optional) (Upper) 1 Raise the lever and open the upper cov er .[...]

Paper Jams 79 2 Remove the original. 3 T urn the dial to remove the original. 4 Open the transport guide.[...]

5 TROUBLESH OOTING 80 Pape r Jams 5 Raise the guide plate under t he transport guide, and remove th e original under the guide plate. 6 Close the transport guide. 7 Close the upper cover . Paper jams on byp ass tray 1 Pull out the p aper jammed on the bypass tray . 2 Check beneath the transport guide in the p aper feeding area. Check if any paper i[...]

Paper Jams 81 Paper jam behind transfer unit Be careful not to let your fingers be caught between the equipme nt and the side cover . This could injure you. 1 Open the side cover . 2 Pull the transfer unit toward you carefully to lay it down while hold- ing up the green lever . 3 Release the jammed p aper . Be sure not to touch the photoconductive [...]

5 TROUBLESH OOTING 82 Pape r Jams 4 Open the transport guide of the p aper feeding area and check if any p aper is jammed under this guide. Cle ar the p aper if there is any . 5 Close the transfer unit and the s ide cover . Paper jams within fuser unit y Be careful not to let your fingers be caught between the equipment and the side cover . This co[...]

Paper Jams 83 2 Open the transport guide while holding the knob. 3 Release the jammed p aper . Pull the jammed paper up or down as shown below depending on the positio n of the paper . Be sure not to touch the photoconductive drum whe n releasing the jammed paper . 4 Return the transport guide to it s original position, and then close the transfer [...]

5 TROUBLESH OOTING 84 Pape r Jams Paper jams within Paper Feed Unit (optional) 1 Open the side cover and chec k if any p aper is jammed behind the transfer unit.  P . 81 “Paper jam behind transfer unit” 2 Open the p aper feed cover of the unit. 3 Release the jammed p aper . 4 Close the p aper feed cover of the unit. 5 Close the side cover .[...]

Replacing Toner Cartr idge 85 Replacing T oner Cartridge When the toner in the to ner cartridge has run out, replace the ton er cartridge following the pro- cedure below . y Before inserting a new toner cartridg e, check the product name of t he cartridge . If you can see “T -1810”, th is cartridge is usable. y Dispose of used toner cartri dges[...]

5 TROUBLESH OOTING 86 Replacing Toner Cartri dge 3 Pull out the toner cartridge. Never attempt to incine rate toner cartridges. Dispose of used toner cartridges in accordan ce with local regulations. 4 Shake the new toner cartridge strongly wit h the label surface down to loosen the toner inside. 5 Remove the protective sheet fro m the end of the c[...]

Replacing Toner Cartr idge 87 6 Pull out the seal in the direction of the arro w . 7 Insert the toner cartridge along the rail. y Before inserting the toner cartridge, check if the green lever is raised and raise it if not. y Insert the toner cartridge un til you hear a click sound. 8 Clean the charger . Hold the cleanin g knob of the charger and p[...]

5 TROUBLESH OOTING 88 Replacing Toner Cartri dge 9 Open the side cover . 10 Pull the transfer unit toward you carefully to lay it down while hold- ing up the green lever . 11 Remove the transfer charger cleaner from the front pocket of the transfer unit.[...]

Replacing Toner Cartr idge 89 12 Wipe the transfer charger wire with the transfe r charger cleaner . (1) Insert the transfer charger clean er into the front end of the transfer charger. (2) Push the cleaner onto the front wall, and then che ck if the cleaner pad has contacted with the transfer charger wire. (3) Clean the wire from its front end to [...]

5 TROUBLESH OOTING 90 Before Calling Service Technician Before Calling Service T echnician When you encounter trouble using this equi pment, check the items listed below . General operation Phenomenon Usual cause Countermeasure The equipment does not operate at all. The power of the equipment is not turned ON. T urn ON the power of the equipment. T[...]

Before Calling Service Technician 91 T oner-related items Original/Copy p aper-related items Even when the equipment is connected with a PC by a USB cable, the equipment is not recognized. This cable is not certified according to the USB2.0 Hi- S peed. Use a USB2.0 Hi-S peed cer tified cable. The equipment is connected with a PC via a USB hub. When[...]

5 TROUBLESH OOTING 92 Before Calling Service Technician Image trouble Copy paper jams. Copy paper not acceptable for the equipment is being used. Check if the copy paper is acceptable for the equipment.  P .31 “Paper types not accep table” The size of the copy paper in the drawer or on the bypass tray is not registered prop- erly in the equi[...]

Before Calling Service Technician 93 The copy image is fogged. There is a slight gap between the original glass and the original. Lower the Platen Cover (optional) or the Automatic Document Feeder (o ptional) fully so that the original will contact with the original glass. The copy paper is damp. Replace with dry copy paper . The density level of t[...]

[...]

6. MAINTENANCE AND INSPECTION This chapter describes how to clean this equip ment to ensure you get the best possible copy performance. Daily Inspection .............................. ..................................................... ................... 96 Cleaning charger ....... .............. .............. .............. .............. ....[...]

6 MAINTENANCE AND INSPECTION 96 Daily Inspection Daily Inspection We recommend a weekly cleaning of the following items to assure you the best scan ning perfor- mance: y Be sure not to scratch the parts to be cleaned. y Do not use sol vent such as thinner or benze ne to clean machinery . This could cause defor- mation or tarnishing. y When using ch[...]

Daily Inspection 97 Cleaning charger If the inside of the charger is dirty , staining may appear on the copied image. Clea n the charger following the procedure below . 1 Open the front cover . 2 Clean the charger . Hold the cleanin g knob of the charger and pull it out toward you care fully until it comes to a stop. Then reinsert it in its origina[...]

6 MAINTENANCE AND INSPECTION 98 Daily Inspection Cleaning transfer charger When the transfer charger wire is dirty , white steaks or unevenness of the density may appear on copied images, or the density of the whole image may be lowered. Clean th e transfer charger wire following the p rocedure below . Be careful not to let your fingers be caught b[...]

Daily Inspection 99 4 Wipe the transfer charger wire with the transfe r charger cleaner . (1) Insert the transfer charger clean er into the front end of the transfer charger. (2) Push the cleaner onto the front wall, and then che ck if the cleaner pad has contacted with the transfer charger wire. (3) Clean the wire from its front end to the other e[...]

[...]

7. SPECIFICA TIONS AND OPTIONS e-STUDIO181 S pecifications .......................................................................... ...... 102 Continuous copying spe ed ... ............................ ....................................... ............ ........... .......... .... ... 103 Packing list ................... .............. .........[...]

7 SPECIFICA TIONS AND OPTIONS 102 e-STUDIO181 Specifications e-STUDIO181 S pecifications y These specifications vary dependin g on th e copying conditions and the environment. y S pecifica tions and appearance are su bject to ch ang e without notice in the interest of product improvement. Model name DP-1810 T ype Desktop type Original glass Fixed P[...]

e-STUDIO181 Specifications 103 Continuous copying speed sheets/min. *1 ST -R and A5-R can be pla ced only on the bypass tray . y The values above are me asured when originals are set on the original glass, 1 00% and non- sort multiple copies are made. y TOSHIBA-recommended p aper is used for t he values of the specifications above. y The bypass cop[...]

7 SPECIFICA TIONS AND OPTIONS 104 Specifications of Options Specifications of Options Automatic Docu ment Feeder Paper Feed Unit TOSHIBA-recommended p aper is used for the val ues above. S peci fications and appeara nce are subject to change without notice in th e interest of product improvement. Model name MR-2020 Copy sides 1-side Number of origi[...]

INDEX 105 INDEX A Acceptable originals ............ ................ ........ 40 Access code ............. ................ ................ .. 27 AC-IN terminal ....... ............. ................ ........ 21 AMS .............. ................. ................ ........... 56 APS ............... ................. ................ ........... 5[...]

106 INDEX Placing or iginals .......... ................ ......... 40 , 44 Placing paper in drawers ........... ................ .. 32 Platen Cover ......... ................ ................ ..... 20 Platen sheet .......... ................ ................ ..... 22 Power switch ......... ................ ............... 21 , 27 Precautions for Au[...]

Printed in China DP-1810 OME090057B0[...]

2009 - 201 1 TOSHIBA TEC CORPORA TION All rights reserved 6LH94730000 R090620H8501-TTEC V er02 201 1-02 MUL TIFUNCTIONAL DIGIT AL SYSTEMS Operator's Manual for Copying Functions 2-17-2, HIGASHIGOT ANDA, SHINAGAW A-KU, TOKYO, 141-8664, JAP AN LT[...]