Toshiba SD-6980SU manual

2005 T oshiba Corporation DVD VIDEO PLA YER SD-6980SU OWNER’S MANUAL C 00839A-SD-6980SU-Cover 6/29/05 8:58 AM Page 3[...]

ENG-2 Safety Precautions TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER(OR BACK). NO USER-SERVICEABLE P AR TS ARE INSIDE. REFER SERVICING TO QUALIFIED SER VICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the [...]

ENG-3 Introduction Important Safety Instructions 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do not use this apparatus near water . 6) Clean only with dry cloth. 7) Do not block any ventilation openings, Install in accordance with the manufacturer's instructions. 8) Do not instal[...]

ENG-4 Introduction FCC W ARNING : This equipment may generate or use radio frequency energy . Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is ma[...]

ENG-5 Introduction • The product unit accompanying this user manual is licensed under certain intellectual property rights of certain third parties. In particular , this product is licensed under the following US patents: 5,991,715, 5,740,317, 4,972,484, 5,214,678, 5,323,396, 5,539,829, 5,606,618, 5,530,655, 5,777,992, 6,289,308, 5,610,985, 5,481[...]

Install Batteries in the Remote control 1 Open the battery cover on the back of the remote control. Operating with the remote control Point the remote control at the remote sensor and press the buttons. Distance : Approx. 7m(23 feet) from the front of the remote sensor . Angle : Approx. 30º in each direction of the front of the remote sensor . •[...]

ENG-7 T able of Contents Introduction Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Important Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Before you start . . . . . . . . . . . . . . . . . . . . . . . . . [...]

ENG-8 General Features Excellent Sound Dolby Digital, a technology developed by Dolby Laboratories, provides crystal clear sound reproduction. Screen Both regular and widescreen(16:9) pictures can be viewed. Slow Motion An important scene can be viewed in slow motion. Program Play (CD) Y ou can program tracks to play in desired order . Parental Con[...]

ENG-9 Introduction Introduction T o ensure proper use of this product, please read this owner ’s manual carefully and retain for future reference. This manual provides information on the operation and maintenance of your DVD Home Theater System. Should the unit require service, contact an authorized service location. Symbol Used in this Manual Th[...]

ENG-10 T ype of Playable Discs This DVD player is capable of playing the following types of discs with the corresponding logos: Disc Markings Region Number Both the DVD player and the discs are coded by region. These regional codes must match in order for the disc to play . If the codes do not match, the disc will not play . The Region Number for t[...]

ENG-11 Introduction Front Panel Front Panel Display 1. ON/ST ANDBY( ) Use to turn your player on and off (standby). 2. POWER Indicator This indicator will lights up when the power is on. 3. DISC TRA Y Place the disc here. 4. DISPLA Y Operation indicators are displayed here. 5. MUL TI- CARD INPUT Insert a Memory Card. 6. OPEN/CLOSE ( ) Press to open[...]

ENG-12 Rear Panel 1. 5.1CH ANALOG AUDIO OUT JACKS - Connect to an amplifier with 5.1ch analog input jacks. 2. DIGIT AL AUDIO OUT JACKS - Use either an optical or coaxial digital cable to connect to a compatible Dolby Digital receiver . - Use either an optical or coaxial digital cable to connect to an A/V Amplifier that contains a Dolby Digital, MPE[...]

ENG-13 Introduction Remote Control 1. OPEN/CLOSE ( ) Button T o open and close the disc tray . 2. NUMBER Buttons 3. INPUT Button Selects Video input connection in TV mode. 4. DVD Button Press this to operate DVD Player . 5. TV Button Press this to operate TV . (Go to TV mode.) 6. ZOOM Button Enlarges DVD picture. 7. REPLA Y Button This function is [...]

ENG-14 Choosing a Connection The following shows examples of connections commonly used to connect the DVD player with a TV and other components. Before Connecting the DVD Player - Always turn off the DVD player , TV , and other components before you connect or disconnect any cables. - Refer to the user ’s manual of the additional components (such[...]

ENG-15 Connections Connection to a TV (S-Video) - Connecting to your TV using an S-V ideo cable. - Y ou will enjoy high quality images. S-Video separates the picture element into black and white(Y) and color(C) signals to present clearer images than regular video input mode. (Audio signals are delivered through the audio output.) Note - If you want[...]

ENG-16 Connection to a TV (Interlace) - Connecting to your TV using Component video cables. - Y ou will enjoy high quality and accurate color reproduction images. Component video separates the picture element into black and white(Y), blue(P B ), red(P R ) signals to present clear and clean images. (Audio signals are delivered through the audio outp[...]

ENG-17 Connections Connection to a TV (Progressive) Note - What is "Progressive Scan"? Progressive scan has twice as many scanning lines as the interlace output method. Progressive scanning method provides better and clearer picture quality . 1 Using component video cables (not supplied), connect the COMPONENT VIDEO OUT terminals on the r[...]

ENG-18 Connecting to a TV with HDMI Jack 1 Using the HDMI cable, connect the HDMI OUT terminal on the rear of the DVD player to the HDMI IN terminal of your TV . 2 Press the input selector on your TV remote control until the HDMI signal from the DVD player appears on your TV screen. HDMI VIDEO Specifications When you press the HDMI button, 480p, 72[...]

ENG-19 Connections • HDMI (High Definition Multimedia Interface) HDMI is an interface to enable the digital transmission of video and audio data with just a single connector . Using HDMI, the DVD player transmits a digital video and audio signal and displays a vivid picture on a TV having an HDMI input jack. • HDMI, the HDMI logo and High-Defin[...]

ENG-20 Note - Please turn the volume down when you turn on the Amplifier . Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 61) - The position of terminals may vary depending on the Amplifier . Please refer to the user's manual of the Ampli[...]

ENG-21 Connections Note - Please turn the volume down when you turn on the Amplifier . Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 61) - The position of terminals may vary depending on the Amplifier . Please refer to the user's manual [...]

ENG-22 Note - Please turn the volume down when you turn on the Amplifier . Sudden loud sound may cause damage to the speakers and your ears. - Please set the audio in the menu screen according to the Amplifier . (See pages 60 to 61) - The position of terminals may vary depending on the Amplifier . Please refer to the user's manual of the Ampli[...]

ENG-23 Basic Functions Playing a Disc Before Play - T urn on your TV and set it to the correct V ideo Input on the TV's remote control. - If you connected an external Audio System, turn on your Audio System and set it to the correct Audio Input. After plugging in the player , the first time you press the DVD POWER button, this screen comes up:[...]

ENG-24 6 Pausing Play Press the PLA Y/P AUSE () or STEP button on the remote control during play . ▼ Screen stops, no sound. T o resume, press the PLA Y/P AUSE ( ) button once again. Note If the player is left for about 5 minutes in pause mode, it will stop. 7 Step Motion Play (Except CD) Press the STEP button on the remote control during play . [...]

ENG-25 Basic Functions Using the Search and Skip Functions During play , you can search quickly through a chapter or track, and use the skip function to jump to the next selection. Searching through a Chapter or T rack During play , press the SEARCH (o r ) button on the remote control for more than 1 second. ▼ During play , press the SEARCH ( or [...]

ENG-26 Using the Display Function When Playing a DVD/VCD/CD/MPEG4 1 During play , press the DISPLA Y button on the remote control. ▼ Y ou can select Info in the function menu by pressing the MENU button. 2 Press the … / † buttons to select the desired item. DVD VCD CD ▼ When VCD2.0 is in Menu Off mode only , this function works. Select Menu[...]

ENG-27 Basic Functions 4 T o make the screen disappear , press the DISPLA Y button again. Note T o access the desired title when there is more than one in the disc. For example, if there is more than one movie on a DVD, each movie will be identified. Most DVD discs are recorded in chapters so that you can quickly find a specific passage (similar to[...]

ENG-28 Using the Disc and Title Menu Using the Disc Menu (DVD) 1 During the playback of a DVD disc, press the SETUP button on the remote control. 2 Press the … / † buttons to select Disc Menu , then press the √ or ENTER button. Note - Depending on a disc, the Disc Menu may not work. - Y ou can also use the Disc Menu, using the DISC MENU butto[...]

ENG-29 Basic Functions Using the Function Menu Using the Function Menu (DVD/VCD) 1 Press the SETUP button during playback. 2 Press the … / † buttons to select Function , then press the √ or ENTER button. - Info (See pages 26 to 27) - Zoom (See page 39) - Marker (See pages 37 to 38) - Repeat (See pages 30 to 31) - Angle (See page 35) - Front D[...]

ENG-30 Repeat Play Repeat the current track, chapter , title, a chosen section (A-B), or all of the disc. When playing a DVD/VCD/CD 1 Press the REPEA T button on the remote control. Repeat screen appears. 2 Press the œ / √ buttons to select Chapter , Title or A-B , then press the ENTER button. ▼ DVD repeats play by chapter or title, CD and VCD[...]

ENG-31 Basic Functions Slow Repeat Play This feature allows you slowly to repeat scenes containing sports, dancing, musical instruments being played etc., so you can study them more closely . When playing a DVD/VCD 1 During play , press the PLA Y/P AUSE ( ) button. 2 Press the SEARCH ( ) button to choose the play speed between 1/8, 1/4 and 1/2 of n[...]

ENG-32 Program Play & Random Play Program Play (CD) Program Play allows you to select the order in which you want tracks to play . 1 During play , press the PROGRAM button. Random Play (CD) Random Play plays a disc's tracks in random order . 1 Press the PROGRAM button. 2 Press the œ / √ buttons to select RANDOM . Press the ENTER button.[...]

ENG-33 Advanced Functions Selecting the Audio Language Y ou can select a desired audio language quickly and easily with the AUDIO button. Using the AUDIO button (DVD/VCD/CD) 1 Press the AUDIO button. The Audio changes when the button is pressed repeatedly . - The audio languages are represented by abbreviations. 2 T o remove the AUDIO icon, press t[...]

ENG-34 Selecting the Subtitle Language Y ou can select a desired subtitle quickly and easily with the SUBTITLE button. Using the SUBTITLE button (DVD/MPEG4) 1 Press the SUBTITLE button. The subtitle changes when the button is pressed repeatedly . The subtitle languages are represented by abbreviations. 2 T o remove the SUBTITLE icon, press the CLEA[...]

ENG-35 Advanced Functions Changing the Camera Angle When a DVD contains multiple angles of a particular scene, you can use the ANGLE function. Using the Angle Function (DVD) If the disc contains multiple angles, the ANGLE appears on the screen. 1 During play or pause mode, press the SETUP button on the remote control. 4 Press the œ / √ button re[...]

ENG-36 Using the Instant Replay/Skip Function Using the Instant Replay function (DVD) If you miss a scene, you can see it again using this function. Press the REPLA Y button. - The current scene moves backward about 10 seconds, and plays back. Using the Instant Skip function (DVD) Use this function to skip playback about 10 seconds ahead of the cur[...]

ENG-37 Advanced Functions Using the Marker Function This feature lets you bookmark sections of a DVD or VCD (Menu Off mode) so you can quickly find them at a later time. Using the Marker Function (DVD/VCD) 1 During play , press the MARKER button on the remote control. Using the SETUP button. During play , press the SETUP button on the remote contro[...]

ENG-38 Recalling a Marked Scene 1 During play , press the MARKER button on the remote control. 3 Press the PLA Y/P AUSE ( ) button to skip to the marked scene. 2 Press the œ / √ buttons to select a marked scene. Clearing a Marker 1 During play , press the MARKER button on the remote control. 3 Press the CLEAR button to delete a bookmark number .[...]

ENG-39 Advanced Functions Using the Zoom Function Using the Zoom Function (DVD/VCD) 1 During play , press the ZOOM button on the remote control. Using the SETUP button. During play or pause mode, press the SETUP button on the remote control. Press the … … / † † buttons to select Zoom , then press the √ or ENTER button. 2 Press the … …[...]

ENG-40 3 Depending on the file type stored on the Memory card, audio files will be played the same way as MP3/WMA files and picture files will be played the same way as Picture CD’s files. (See pages 48 to 54) 1 Insert a Memory Card. 2 Press the DVD/CARD button on the remote control. How to insert a Memory Card This unit accepts 1 1 different typ[...]

ENG-41 Advanced Functions 5 T o make the screen disappear , press the DISPLA Y button again. DVD AUDIO Playback 1 Open the disc tray . Place the DVD AUDIO disc on the tray . - Place the DVD AUDIO disc with the labeled side up. Close the tray . - The tray closes and disc plays. 2 During play , press the DISPLA Y button on the remote control. ▼ Y o[...]

ENG-42 Note Most DVD AUDIO discs are recorded in Groups you can change Groups with this Function. Bonus Group playback. Some DVD AUDIO discs have Bonus groups. If you want to play a Bonus group, you must enter the Bonus Group code. The code is usually on the DVD AUDIO disc case. T o access the desired T rack when there is more than one on the DVD A[...]

ENG-43 Advanced Functions REPEA T Play 1 Press the REPEA T button on the remote control. Repeat screen appears. 2 Press the œ / √ buttons to select T rack , Group , then press the ENTER button. ▼ T rack ( ): repeats the title that is playing. Group ( ): repeats the group that is playing. DVD-AUDIO Off 01 01 AUDIO Format Display 1 During DVD AU[...]

ENG-44 Super Audio CD Playback 1 Open the disc tray . Place the Super Audio CD disc on the tray . - Place the Super Audio CD disc with the labeled side up. Close the tray . - The tray closes and you should get a screen. Super Audio CD Clips Menu On Play Function 1 Use the … / † buttons to select a music title. 2 Press the ENTER button to begin [...]

ENG-45 Advanced Functions 5 T o make the screen disappear , press the DISPLA Y button again. Super Audio CD Clips Menu Off Play Function 1 In Stop mode, press the DISC MENU button until the Clips menu is off. 2 During play , press the DISPLA Y button on the remote control. ▼ Y ou can select Info in the function menu by pressing the SETUP button. [...]

ENG-46 Note (SACD) T o access the desired T rack when there is more than one in the disc. (SACD) Allows playback from a desired time by using the number buttons. (SACD) If you want to change the 2 channel or multi channel mode in play or stop mode, press AUDIO button. - Y ou can use this function when the Super Audio CD disc includes multi channel [...]

ENG-47 Advanced Functions Clips Menu for MP3/WMA/JPEG/MPEG4 Discs with MP3/WMA/JPEG/MPEG4 contain individual songs and/or pictures that can be organized into folders as shown below . They are similar to how you use your computer to put files into different folders. Open the disc tray . Place the disc on the tray . Close the tray . The tray closes a[...]

ENG-48 MP3/WMA Playback 1 Open the disc tray . Place the disc on the tray . Close the tray . ▼ When a disc that contains both MP3 and WMA files, only one type will play , not both. 2 Press the … … / † † or œ / √ buttons to select a song file. Press ENTER to begin playback of the song file. ROOT WMA JPEG MP3 MPEG4 ROOT Repeat/Random pla[...]

ENG-49 Advanced Functions MP3/WMA file When you record MP3 or WMA files on CD-R/Memory Card, please refer to the following. - Y our MP3 or WMA files should be ISO 9660 or JOLIET format. ISO 9660 format and Joliet MP3 or WMA files are compatible with Microsoft's DOS and Windows, and with Apple's Mac. This format is the most widely used. Me[...]

ENG-50 MPEG4 Playback MPEG4 Play Function A VI files are used to contain the audio and video data. Only A VI format files with the “.avi” extensions can be played. 1 Open the disc tray . Place the disc on the tray . Close the tray . 2 Press the … … / † † or œ / √ buttons to select an avi file (DivX/XviD), then press the ENTER button.[...]

ENG-51 Advanced Functions Note - Some MPEG4 files created on a personal computer may not be play back. That is why Codec T ype, V ersion and Higher resolution over specification is not supported. - This unit supports CD-R/RW written in MPEG4 in accordance with the “ISO9660 format”. MPEG4 Function Description - These functions may not work depen[...]

ENG-52 Picture CD Playback 1 Select the desired folder . Note - If no buttons on the remote control are pressed for 10 seconds, the menu will disappear . - Press the STOP button to return to the clips menu. - When playing a Kodak Picture CD, the unit displays the Photo directly , not the clips menu. 2 Press the … … / † † buttons to select a[...]

ENG-53 Advanced Functions Picture CD Playback for HD-JPEG Must connect to HDMI. Resolution should be 720p or 1080i, and HD-JPEG should be in HD mode. (See page 64) 2 Select the desired folder . 1 Set the HD-JPEG to HD from Setup menu. (See page 64) 3 Press the … … / † † buttons to select a Picture file in the clips menu and then press the E[...]

ENG-54 JPEG Discs When playing a CD-R/Memory Card/Picture CD - Only files with the “.jpg” and “.JPG” extensions can be played. - If the disc is not closed, it will take longer to start playing and not all of the recorded files may be played. - Only CD-R discs with JPEG files in ISO 9660 or Joliet format can be played. - Some memory cards ma[...]

ENG-55 Changing Setup Menu Using the Setup Menu The Setup menu lets you customize your DVD player by allowing you to select various language preferences, set up a parental level, even adjust the player to the type of television screen you have. Œ Language Setup : Setup of the Language. ´ Audio Setup : Setup of the Audio Options. ˇ Display Setup [...]

ENG-56 Setting Up the Language Features If you set the player menu, disc menu, audio and subtitle language in advance, they will come up automatically every time you watch a movie. Using the Player Menu Language 1 With the unit in Stop mode, press the SETUP button. 3 Press the … … / † † buttons to select Language Setup , then press the √ [...]

ENG-57 Changing Setup Menu Using the Disc Menu Language This function changes the text language only on the disc menu screens. 4 Press the … … / † † buttons to select Disc Menu , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button. ▼ - Select “Other[...]

ENG-58 Using the Audio Language 4 Press the … … / † † buttons to select Audio , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button. ▼ - Select “Original” if you want the default soundtrack language to be the original language the disc is recorded[...]

ENG-59 Changing Setup Menu Using the Subtitle Language 4 Press the … … / † † buttons to select Subtitle , then press the √ or ENTER button. 5 Press the … … / † † buttons to select the desired language, then press the √ or ENTER button. ▼ - Select “Automatic” if you want the subtitle language to be the same as the language [...]

ENG-60 Setting Up the Audio Options Audio Options allows you to setup the audio device and sound status settings depending on the audio system in use. 3 Press the … … / † † buttons to select Audio Setup , then press the √ or ENTER button. 4 Press the … … / † † buttons to select the desired item, then press the √ or ENTER button.[...]

ENG-61 Changing Setup Menu Note • T o exit the setup menu, press the SETUP button. • DVD-AUDIO - Outputs 2 channel digital audio only . - Some DVD-AUDIO discs do not downmix, so they will not output 2 channel digital audio. - MUL TI channel DVD-AUDIO discs play back through the analog outputs. • Super Audio CD - Outputs analog signals only . [...]

ENG-62 Surround Sound Speaker Setup 3 Press the … … / † † buttons to select Audio Setup , then press the √ or ENTER button. 4 Press the … … / † † buttons to select Speaker Setup , then press the √ or ENTER button. 1 With the unit in Stop mode, press the SETUP button. ▼ T o exit the setup menu, press the SETUP button. Setup Lan[...]

ENG-63 Changing Setup Menu The default settings : FRONT L, R (Small), CENTER (Small), SURROUND (Small). Select the size of the speakers to be connected. ΠFront (FL, FR) - Large: Normally select this. - Small: When the sound distorts or the surround sound effects are dif ficult to hear , select this. This activates the Dolby Digital bass redirecti[...]

ENG-64 Setting Up the Display Options Display options enable you to set various video functions of the player . 3 Press the … … / † † buttons to select Display Setup , then press the √ or ENTER button. 4 Press the … … / † † buttons to select the desired item, then press the √ or ENTER button. 1 With the unit in Stop mode, press [...]

ENG-65 Changing Setup Menu ΠTV Aspect Depending on the type of television you have, you may want to adjust the screen setting (aspect ratio). - 4:3 Letter Box : Select when you want to see the total 16:9 ratio screen DVD supplies, even though you have a TV with a 4:3 ratio screen. Black bars will appear at the top and bottom of the screen. - 4:3 [...]

ENG-66 Ø HDMI This setting is used when the unit is connected by HDMI to Display devices (TV , Projector , etc.). - Resolution setting • Auto : Resolution setting automatically • Manual : Resolution setting manually - Resolution • 480p : 720 x 480 • 720p : 1280 x 720 • 1080i : 1920 x 1080 - Format Y ou can use this function to set HDMI o[...]

ENG-67 Changing Setup Menu Setting Up the Parental Control The Parental Control function works in conjunction with DVDs that have been assigned a rating, which helps you control the types of DVDs that your family watches. There are up to 8 rating levels on a disc. 3 Press the … … / † † buttons to select Parental Setup , then press the √ o[...]

ENG-68 Setting Up the Rating Level 2 Press the … … / † † buttons to select Parental Setup , then press the √ or ENTER button. 3 Enter your password. 4 Press the … … / † † buttons to select Rating Level , then press the √ or ENTER button. ▼ T o exit the setup menu, press the SETUP button. For example, if you select up to Level [...]

ENG-69 Changing Setup Menu Changing the Password 3 Press the … … / † † buttons to select Parental Setup , then press the √ or ENTER button. The Enter Password screen appears. Enter your password. 4 Press the … … / † † button to select Change Password , then press the √ or ENTER button. Enter your new password. Re-enter the new p[...]

ENG-70 Reference Setting Control Codes 1. Press TV to set the remote control operating your TV . 2. While holding down PROGRAM button enter the two diglts of your TV’ s brand code (listed right) using number buttons. 3. Release PROGRAM . 4. Point the remote control at your TV and use each button listed below to make sure your TV is operated corre[...]

ENG-71 Reference Reference T roubleshooting Before requesting service (troubleshooting), please check the following. No operations can be performed with the remote control. The screen ratio cannot be changed. No audio. Play mode differs from the Setup Menu selection. Disc Menu doesn’t appear . The icon appears on screen. Forgot password The scree[...]

ENG-72 Reference No HDMI output. HDMI output jitter No Component video outputs in JPEG playback. Abnormal HDMI output screen. • Check the Video output is HDMI enabled. • Check the connection between the TV and the HDMI jack of DVD player . • See if the TV supports this 480p/720p/1080i DVD player . • If snow noise appears on the screen, it m[...]

ENG-73 Reference Reference Specifications Power Requirements Power Consumption Weight Dimensions Operating T emperature Range Operating Humidity Range DVD (DIGIT AL VERSA TILE DISC) CD : 3 1/2 " (COMP ACT DISC) CD : 8Cm (COMP ACT DISC) VCD : 3 1/2 " Composite Video Component Video S-Video HDMI 2 Channel 5.1 Channel Digital Audio Output *F[...]

ENG-74 T oshiba America Consumer Products, L.L.C. ("T ACP") makes the following limited warranties to original consumers in the United States. THESE LIMITED W ARRANTIES EXTEND TO THE ORIGINAL CONSUMER PURCHASER OR ANY PERSON RECEIVING THIS DA V PRODUCT AS A GIFT FROM THE ORIGINAL CONSUMER PURCHASER AND T O NO OTHER PURCHASER OR TRANSFEREE[...]

ENG-75 Reference (5) W arranties extend only to defects in materials or workmanship as limited above, and do not extend to any DA V Product or parts that have been lost or discarded by you or to damage to the DA V Product or parts caused by fires, misuse, accident, Acts of God (such as lightning or fluctuations in electric power), improper installa[...]

AK68-00839A-00 SmartMedia is a trademark of T oshiba Corp. T oshiba is an authorized licensee of the Compact Flash® registered trademark. SD is a trademark of SD Card Association. MMC and MultiMedia Card are trademarks of Infineon T echnologies AG and licensed to MMCA (MultiMediaCard Association). Memory Stick is a trademark of Sony Corporation. 0[...]