TP-Link TD-8811B manual

TD-8811/TD-8811B External ADSL2+ ROUTER[...]

COPYRIGHT & TRADEMARKS Specifications are subjec t to change without notice. is a registered trademark of TP-LINK TECHNOLOGIES CO., LTD. Other brands and product names are trademarks or registered trademarks of their respective holders. No part of the specificat ions may be reproduced in any form or by any means or used to make any derivative s[...]

FCC STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rule s. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and c an radiate radio frequency ener g y and, if [...]

Package contents The following contents should be found in your box: ¾ One TD-8811/TD-8811B External ADSL2+ ROUTER ¾ One AC power Adapter for TD-8811/8811B External ADSL2+ ROUTER ¾ One Resource CD for TD-8811/TD-8811B External ADSL2+ ROUTER, including: • This User Guide • Quick installation Guide Program • Other Helpful Information • USB[...]

COMMENT Chapter 1. Product Overview .................................................................... 1 1.1 Product main specification .............................................................................1 1.2 Supporting protocol ........................................................................................1 1.3 Transmit data-r[...]

TD-8811 / 8811B External ADSL2+ ROUTER 1 Chapter 1. Product Overview The TP-LINK TD-8811/TD-8811B External ADSL2+ ROUTER is the latest product designed and manufactured by TP-LINK TECHNOLOGIES CO., LTD. With TP-LINK’s excellent circuit design and high quality production, we guarantee its high performance, great stability and easy to use. The TD-8[...]

TD-8811 / 8811B External ADSL2+ ROUTER 2 1.3 T ransmit dat a-rate ¾ Max download data-rate: 24Mbps ¾ Max upload data-rate: 1Mbps ¾ Max line length: 6Km 1.4 AT M p r o p e r t y ¾ AAL0, AAL5, OAM, RM, and raw cell types supported ¾ Direct hardware support for 4 Receive VCs, wi th additional RX VCs and TX VCs supported in software ¾ Full 24-bit[...]

TD-8811 / 8811B External ADSL2+ ROUTER Chapter 2. Hardware Installation Guide The TD-8811/TD-8811B maintains three separate interfaces, one Ethernet, one USB interface and one ADSL interface. The Router should not be located where it will be exposed to moisture or excessive heat. Place the Router in a location wher e it can be safely con nected to [...]

TD-8811 / 8811B External ADSL2+ ROUTER 4 2.3 Rear-p anel ¾ ON/OFF : Turn on/off the ADSL2+ Router’s power. ¾ POWER (9VAC/0.8A input) : please do not use any unknown po wer adapter, otherwise your ADSL2+ Router may be damaged. ¾ RESET (reset default) : Press the reset button, then turn on the Router's power (keep the button pressed) for at[...]

TD-8811 / 8811B External ADSL2+ ROUTER 5 Figure 2-1 Chapter 3. System Configuration 3.1 Computer Configuration 1. Connect the cable according to Chapter 2, turn on the power. 2. Change the IP address of your PC （ Figure 3-1 ） : Open TCP/IP Properties of the LAN card in your PC, enter the IP address as 192.168.1.* (* is any value between 2 to 25[...]

TD-8811 / 8811B External ADSL2+ ROUTER 6 Figure 3-1 ) Note: 1) Users of Windows 98 can open TCP/IP Properties according to the following: Right-click (Mouse) Network Neighbor -> Choose Properties -> Double-click TCP/IP PCI Fast Ethernet Adapter . 2) The users of Windows 2000/NT/XP can do the following: Right-press Netw ork Neighbor ->Choos[...]

TD-8811 / 8811B External ADSL2+ ROUTER 7 Figure 3-2 If the screen looks like the following, the connection fails. Repeat the previous steps again. Figure 3-3 3.2 Login Startup Internet Explorer, and enter 192.168. 1.1, then ent er defau lt user name(admin) 、 password(admin), When ADSL2+ c onnection is OK, you will see the Figure 3-4 .[...]

TD-8811 / 8811B External ADSL2+ ROUTER 8 Figure 3-4 You will then see the Figure 3-5 . This screen displays some inform ation about the device such as link rate. Figure 3-5 Default user name and password both are “admin”; if you want to change them, please go to[...]

TD-8811 / 8811B External ADSL2+ ROUTER 9 “ Management ” Æ “ Access control ” Æ “ Passwords ”. ( Figure 3-6 ) Figure 3-6 3.3 Web Setup Choose “ Advanced Setup ” Æ ” WAN ”, you will enter the page of Wide Area Network (WAN) Setup, you will see the Figure 3-7 . Figure 3-7 There are 7 PVC links in the WAN setup page, choose the r[...]

TD-8811 / 8811B External ADSL2+ ROUTER 10 Figure 3-8 Enter VPI/VCI value and service category which is provided by your ISP, click next to enter the next step. You will see the Figure 3-9 . ) Note: The type of network protocol selected may be diffe rent in different areas, there are five types （ Figure 3-9 ） , so you should ask your ISP to acqu[...]

TD-8811 / 8811B External ADSL2+ ROUTER 11 of user name and password which is provided by y our ISP, after selecti ng other functions (often using the default setup), click the next button. Figure 3-10 After that, the Figure 3-11 will appear. Turn on the selected f unctions according to your demands. Clicking the next button to enter the nex t step,[...]

TD-8811 / 8811B External ADSL2+ ROUTER 12 Figure 3-12 ¾ PPP over Ethernet (PPPoE) If you select the protocol of PPP ov er Ethernet (PPPoE), you will see the Figure 3-13 , enter the value of user name and password wh ich is provided b y your ISP, after selecting other functions (often using the default setup), click the next button. Figure 3-13 You[...]

TD-8811 / 8811B External ADSL2+ ROUTER 13 Figure 3-14 Figure 3-15 ¾ MAC Encapsulation Routing (MER) If you select the protocol of MAC Encapsul ation Routing (MER), you will see the page ( Figure 3-16 ). Enter the parameter and the way which is provide d by your ISP, then click the next button.[...]

TD-8811 / 8811B External ADSL2+ ROUTER 14 Figure 3-16 After that, Figure 3-17 will be available. You can select t he functions according to your needs. Clicking the next button to enter the nex t step, you will see the Figure 3-18 , finally click save to complete the configuration. Figure 3-17[...]

TD-8811 / 8811B External ADSL2+ ROUTER 15 Figure 3-18 ¾ IP over ATM (IPoA) If you select the protocol of IP over ATM (IPoA), the Figure 3-19 will display, enter the parameter and the way which is provided by your ISP, then click the next button. Figure 3-19 You will see the page ( Figure 3-20 ), then turn on the selected func tions according to yo[...]

TD-8811 / 8811B External ADSL2+ ROUTER 16 Figure 3-20 Figure 3-21 ¾ Bridging If you select the Bridging protocol, you just open the bridge service func tion options, you will see the Figure 3-22 , then click the next button, you will see the Figure 3-23 , press save to complete the configuration finally.[...]

TD-8811 / 8811B External ADSL2+ ROUTER 17 Figure 3-22 Figure 3-23 ) Note: After you complete the settings, the new settings must be saved and the Router must be restarted for the settings to take effe ct. Please press the Save/Reboot button on the Figure 3-24 to restart.[...]

TD-8811 / 8811B External ADSL2+ ROUTER 18 Figure 3-24 ) Note: All of the above setting is under windows XP OS. 3.4 Sof tware Dial If TD-8811/TD-8811B CPE work in bridged (RFC 1483 Bridged) mode when it connects Internet. You must install dial software on your PC. There are some software working on Windows in market, example for EnterNet 3000, RASPP[...]

TD-8811 / 8811B External ADSL2+ ROUTER 19 3.5 USB Configuration If you use the USB interface, Firs t, you must install the USB’s drive to the computer. You can obtain the drives from the provided CD or download from our webs ite. ( http://www.tp-link.com ) USB Drive installation procedures If the har dware is ins talled be fore the co mputer i s [...]

TD-8811 / 8811B External ADSL2+ ROUTER 20 Figure 3-26 Select the ‘search removable media(floppy, CD-ROM … )’ and click the next button, then Figure 3-27 is available. The driver will be searched and installed. ) Note: You must insert the CD first. Figure 3-27[...]

TD-8811 / 8811B External ADSL2+ ROUTER 21 After that, you will see the Figure 3-28 . The installation completes, click Finish to close the installation. Please refer to chapter 3.1 to finish the IP configuration fo r USB connect. Then you could use the USB device. Figure 3-28 ) Note: 1) All of the above settings are under windows XP. 2) If you want[...]

TD-8811 / 8811B External ADSL2+ ROUTER 22 Chapter 4: Advantage management setup In order to satisfy our customer's needs, we o ffer an excellent Web manag ement interface. Feel free to utilize the Advantage application and onli ne software upgrades. The functions of the Web management interface are as follows: ¾ Upgrade software ¾ Modify the[...]

TD-8811 / 8811B External ADSL2+ ROUTER 23 Appendix A: FQA 1. What relate d parameters are required to acquire ISP w hen you want to access the internet by ADSL2+ ROUTER? 1) Dial user: Connection prot ocol, User name, Password, Va lue of VPI/VCI, Encapsulation mode of AAL5 and so on. 2) Static IP user: Connecti on protocol, WAN IP Address, Su bnet M[...]

TD-8811 / 8811B External ADSL2+ ROUTER 24 Appendix B: Default Configuration USER NAME admin PASSWORD admin IP ADDRESS 192.168.1.1 VPI/VCI 0/32,1/33,0/35,0 /100,0/200,8/35,8/81[...]

TD-8811 / 8811B External ADSL2+ ROUTER 25 Appendix C: Contact Information For more help with the installation or operatio n of the TP-LINK TD-8811/TD-8811B External ADSL2+ ROUTER, please contact us. Website: http://www.tp-link.com[...]