Tyan Computer B2881 manual

T ransport G T24 B2881 Service Engineer ’ s Manual[...]

[...]

PREF ACE Copyright This pub lication , incl uding all photograp hs, illus tration s, and so ft- ware, is pro tected un der int ernational copyrigh t laws, with all right s reserved . Neither thi s manual , nor any mat erial con tained herein , may be r eproduced without written con sent of the manufac turer-. Copyright 200 5 Ve r s i o n 1 . 0 Disc[...]

ii Federal Communica tions Commission (FCC) Notice for the USA Com pliance Info rmation S tate- ment (De claration of Conform ity Procedur e) DoC FCC Part 15: This de vice c omplies w ith p art 15 o f the FC C Rules Operatio n is sub ject to the fo llowing co nditio ns: 1) This d evice may not cause ha rmful inte rference, a nd 2) This d evice must[...]

iii About this Manual This ma nual pr ovides you with ins tructions on inst all ing your T ransp ort G T24, an d consist s of the followi ng sectio ns: Chapter 1: Provides an Introduc tion to th e T ransport G T24 B2881 bare -bones , packin g list, de scribes the external comp onents , gives a ta ble of key compo- nent s, and provides bl ock dia gr[...]

iv SAFETY INFORMA TION Before ins tallin g and usi ng the T ransport G T24, take note of the fol- lowing precautio ns: – Read al l instruc tions ca refully . – Do not p lace the unit on an unsta ble surfac e, cart, o r st and. – Do not b lock the sl ots an d open ing on the unit, which are pro- vided fo r venti lation. – Only use the powe r[...]

v T able of Content s Chapter 1:Overview 1.1 About the Transp ort GT24 B2881 . . . . . . . . . . . . . . . . . . . . . . . . . 1 1.2 Product Models . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 1.3 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 1.4 Unpacking[...]

vi 3.4.2 Removing the Motherbo ard . . . . . . . . . . . . . . . . . . . . . . . . 43 3.5 Replacing the LED Co ntrol Board . . . . . . . . . . . . . . . . . . . . . . . . 46 3.6 Replacing the M101 2 Adapter Board . . . . . . . . . . . . . . . . . . . . . . 48 3.6.1 M1012 Adapter Bo ard Features. . . . . . . . . . . . . . . . . . . . . 49 3.6.2 M101[...]

Chapter 1: Overv iew 1 Chapter 1: Ov erview 1.1 About the T ransport G T24 B2881 Cong ratul ati ons on your pu rcha se of t he TY AN T ran sport TM G T24 ( B2881), a h ighly-optimi zed rack-m ountable barebo ne syste m. The T ran sport G T 24 (B2881 ) offers the late st in d ual process or server sy stems, provi ding a rich fe ature set and incredi[...]

2 Chapter 1: Ov erview 1.2 Product Models B2881G2 4S4H B2881G2 4U4H B2881G2 4S4-LC Model HDD Bays Hot-Swap Support HDD Backpla ne B2881G 24U4H Rem ovable, 4 HDDs Ye s 4-port Ultra SCSI B2881G2 4S4H Rem ovable, 4 HDDs Ye s 4 - p o r t S A TA B2881G24S 4-LC Internal (Fix ed), 4 HDDs No None .[...]

Chapter 1: Overv iew 3 1.3 Features Enclosure • Indus try 19” rack-m ountable 1U chass is st orage ba y – (4) 3.5” HDD bays – (1) sli m line CD- ROM ba y – (1) slim line FDD b ay • Di mensi on: D 25.4 x W 17.17 x H 1.71 inc h (645x43 6x43.6mm) Processo rs • Supp orts one or two AMD Op ter- on TM 200 series pr ocessors Chipset • AM[...]

4 Chapter 1: Ov erview Regulatory • FCC Class B (Declarati on of Con- formity) • CE (D ecla ratio n o f Conf orm ity) Power Supply • EPS 12 V , 1U, 500W w ith PFC • 100 V~240V A C input • Environ ment Temper ature • Opera ting temperatu re 5 o C~35 o C) • No n-op erat ing te mper atur e -40 o C ~ 70 o C[...]

Chapter 1: Overv iew 5 1.4 Unpacking If any it ems are mi ssing or a ppear damage d, contact yo ur retailer or browse to TY AN’s Web site for service: http://www .tyan.com. The W eb s ite al so pr ovide s inf ormat ion on other TY AN pr od- ucts, plus F AQs, compatibility lists, BIOS set tings, and more. 1 x Tyan d river CD SMD C Kit Power Cords [...]

6 Chapter 1: Ov erview Mainboar d Manual Bar ebone Ma nual Heatsin k x 2 Rail Kit Mounting Bracket x 4 Sliding Brackets Front L-Bracket x 2 Rear L-Bracket x 2 Screws Kit Front Rear Sl iding Rails x 2[...]

Chapter 1: Overv iew 7 CD-ROM Accessory Kit (for B2881 G24S4- LC only) CD-ROM Cable CD-ROM Brac ket CD-ROM Backplane & Screws Power C able[...]

8 Chapter 1: Ov erview 1.5 About the Pro duct This sec tion contains the hardware diagr ams and a b lock dia- gram of the G T24 system . 1.5.1 System Fron t View B2881G2 4S4-LC *Reserve d: Reserved LED for futu re upgrade B2881G2 4IU4H/B2881G24 S4H CD-ROM Drive (Optio n) Hard Drive Bay x 4 HDD activity LED Power swit ch Power LED Reset switch USB p[...]

Chapter 1: Overv iew 9 1.5.2 System Rear View 1.5.3 LED Definition Front Panel LED Color St ate Descript ion Power Green OFF ON OFF Power ON Power OFF HDD Activity Amber OFF Blinking OFF HDD access activity No disk activity LAN1/LA N2 Activity Green Green OFF ON Blinking OFF LAN conn ected LAN acces s activity LAN di sco nnect ed Warning Reserved L[...]

10 Chapter 1: Overview Rear I/O LED NOTE: “ Right” or “Left” i s viewed from the rear . LED Col or S tat e Desc ripti on RJ45 NIC1 Linkage (Lef t Sid e) Green Green OFF ON Blinking OFF LAN linked LAN accessing No LAN linked RJ45 NIC1 Mode (Right Side) Amber Green OFF ON ON OFF Giga bit m ode 100M m ode 10M mo de RJ45 NIC2 Linkage (Lef t Sid[...]

Chapter 1: Overv iew 11 1.5.4 System Inte rnal View 1 3 9 8 4 5 6 1. PCI-X Slot (with riser ca rd M2057) 2. PCI-X Slot (with riser ca rd M2052) 3. EPS 12 V Power Suppl y 4. Memory Slots 5. CPU Sockets 6. Sys tem Fans (Left to right: F A N5, F AN4, F AN3, F AN2, FA N 1 ) 7. M1012 A dapter Boar d 8. Front Co ntrol Boar d Cable 9. Four Internal HDD tr[...]

12 Chapter 1: Overview B2881G24 S4H 3 9 11 10 4 5 6 7 8 1 1. PCI-X Sl ot (with riser ca rd M2057) 2. PCI-Sl ot (with riser ca rd M2052) 3. EPS 12V Power Supply 4. CPU Sockets 5. Sys tem Fans (Left to right: F A N5, F AN4, F AN3, F AN2, FA N 1 ) 6. Ad apter Board 7. SA T A Back plane 8. LED Contr ol Board Cable 9. Fo ur SA T A HDD s 10. Slim CD-ROM [...]

Chapter 1: Overv iew 13 3 9 11 10 4 5 6 7 8 1 12 1. PC I-X S lot (w ith ri ser ca rd M2057) 2. PC I-X S lot (w ith ri ser ca rd M2052) 3. EPS 12V Power Supply 4. CPU Sockets 5. Sys tem Fans (Left to right: F A N5, F AN4, F AN3, F AN2, FA N 1 ) 6. Ad apter Board 7. SCSI Backp lane 8. LED Contr ol Board Cable 9. Fo ur SCSI HDDs 10. Slim CD-ROM 1 1. C[...]

14 Chapter 1: Overview 1.5.5 Motherboard La yout[...]

Chapter 1: Overv iew 15 Jumpers & Connectors Jumper Function J4 SMBus 1. 1 Connector J14 Onboard Buzzer/S peaker Hea der J25 USB Front Panel Heade r J34 Clear C MOS Ju mper J42 COM2 He ader J53 PCI-X Slot 1 Bus S peed Overri de J76 SMDC He ader J73/J7 5 Front Pane l LAN LED Headers J77 INTR- Chassi s Intrusio n Heade r J85 A TI V ideo Di sable [...]

16 Chapter 1: Overview 1.5.6 Motherboard Block Diagram[...]

Chapter 2: Setting Up 17 Chapter 2: Setting Up 2.0.1 Before Y ou Begin This chapte r explains how to install the CPU, CPU heats ink, memory modules, a nd hard d rives. Instr uctions on inserti ng a PCI ca rd are a lso gi ven. T ak e note of the precautions mentio ned in this s ection when inst alli ng your sys tem. 2.0.2 Work Ar ea Make s ure you h[...]

18 Chapter 2: Setti ng Up 2.0.4 Precautions Components a nd electron ic circuit boar ds can be dam aged by di scharges o f static e lectricity . Working on a syste m that is connec ted to a power supply can be extreme ly dangerou s. Follow the guideli nes below to a void damage to the T ranspo rt G T24 or injury to yourself. • Groun d yourself pr[...]

Chapter 2: Setting Up 19 2.1 Rack Mounting After in stalling the nece ssary co mponents, t he T ranspo rt G T24 ca n be mounted in a rack usin g the supplied rack m ountin g ki t. Rack mounting kit Slid ing Rail s x 2: Slidin g Brackets x 4 ( Front x 2, Rear x 2) Mount ing Ears x 2 Screw s Kit x 1 Mount ing Brack ets x 4 2.1. 1 Ins t all ing th e S[...]

20 Chapter 2: Setti ng Up Installing the Inner Rails to Chassis 1. Scr ew the mountin g ear to e ach side of Transport G T24 as shown using 2 sc rews from the supplied s crews kit. 2. Draw out th e inner rail s from rail assem bly . Install in ner rails to l eft and right sides of c hassis using 2 M4-5L(D) screws for each side. Installing Outer Rai[...]

Chapter 2: Setting Up 21 4. Loca te the fron t and rear bra ckets. 5. Reserv e 90mm for G T20 or 40mm fo r G T24 on the front bracket. Secure t he front bracket to ou ter rail with 2 M4- 4L(C ) screws . Rear Bracket x2 Front Bracket x2 M4-4L(C) Screw *Remember to add washer .[...]

22 Chapter 2: Setti ng Up 6. Reserv e the distance sam e as in S tep 2 on rear bracket. Secure the rear bracket to ou ter rail with 2 M4-4L(C) screws. 7. Se cure the ou ter rail to the rack usi ng 2 bracke ts and 4 M4-8L( E) screws f or each si de (A). Secu re the mou nting brackets from inside, n ot outside, of the rack (B). Front S ide Remember t[...]

Chapter 2: Setting Up 23 Rackmounting the Server 8. Draw o ut the middle rail to the l atch position . 9. Lift the chassis and then insert the inner sli de rails i nto the middl e rails. 10. Push the chassi s in and pr ess the latc h key (A ). Then push the whole syste m into the ra ck (B). A B[...]

24 Chapter 2: Setti ng Up 1 1. Secure the mounting ears of chass is to the rack with 2 M4-15L(F ) screws. NOTE : T o avoid inju ry , it is st rongly rec ommended that two people l ift the T ransport G T24 into the plac e while a thir d per- son screws it to the rack.[...]

Chapter 2: Setting Up 25 2.2 Installing Motherboard Components This se ction des cribes how to install co mponents on to the motherb oard, incl uding CPU, m emory modu les and PCI card. 2.2.1 R emoving the Ch assis Cover Follow these instr uctions to remove the T r ansport G T24 chassi s cover . 1. Releas e the screw on the back side . Then slide t[...]

26 Chapter 2: Setti ng Up 2.2.2 Installing the CPU, Heat sink and Air Duct Follo w these instr uctions to install the CPU, CPU hea ts ink and air duct. 1. After r emoving the p re-installe d air duct, loc ate the CPU socke ts. 2 . P u l l t h e C P U l e v e r u p t o u n l o c k t h e C P U s o c k e t . 3. Plac e the CPU in th e CPU socket, e nsu[...]

Chapter 2: Setting Up 27 4. Pre ss the CPU s ocket leve r down in the directi on shown to secur e the CPU. 5. Alig n the heatsin k screw holes with the h oles on t he motherbo ard and inser t two heatsink s crews as sho wn. 6. Replac e the air d uct over the heatsink and sec ure the heatsink wi th two screws.[...]

28 Chapter 2: Setti ng Up 2.2.3 Inst alling the M emory Follo w these in structions to install the memory m odules o n the mothe rboard. 1. Loca te the memor y slots on the mo therboard. 2. Pre ss the memor y slot loc king leve rs in the di rection of the arrows as shown in the following il lustration. 3. Alig n the memo ry module with the slot. Th[...]

Chapter 2: Setting Up 29 4. Inser t the memo ry module into the slot as shown. When in serted p roperly , th e memo ry slot lock ing lev ers lock automati cally onto the indentatio ns at the ends of the mo dule. 2.2.4 Installing a P CI-X Card There are two PCI -X slots on the rear p anel of G T24. Refer to the proc edures below for PCI-X ins tallat[...]

30 Chapter 2: Setti ng Up 2. Mo ve the brac ket to left as sh own. 3. Insert t he PCI-X card as shown. 4. Pu sh the tab of PCI-X s lot in the dire ction as sho wn to fix PCI-X c ard.[...]

Chapter 2: Setting Up 31 2.3 Installing the Hard Drive for B2881G24S4-LC Foll ow thes e ins truct ions t o ins tal l a SA T A ha rd dr ive fo r model B 2881G24S4-LC. 1. Remov e the screw to r elease the hard drive tray . 2. Slid e the drive tray out. 3. Plac e a hard dri ve into the dr ive tray and t hen secure the hard dr ive using 4 s crews.[...]

32 Chapter 2: Setti ng Up 4. Insert t he hard drive tray in to the bay . 5. Secu re the HDD using a s crew . 6. Connec t the da ta and po wer cable s.[...]

Chapter 2: Setting Up 33 2.4 Installing the Hard Drive for B2881G24S4H /U4H The Transport G T 24 barebone system su pports Serial A T A and SC SI hard dr ives. Follo w these instruct ions to install a SA T A or SCSI hard dri ve for mode l B2881G24 U4H/B2881G24 S4H. 1. Press th e loc king lever l atch i n the d irec tio n of ar row ( A ) and the n p[...]

34 Chapter 2: Setti ng Up 4. Using 4 H DD screws to secure the HDD. 5. Reinsert th e drive tray into th e chassis (A), e nsuring that the drive tray is compl etely inse rted into the chassis (B). 6. Pre ssing the l ocking lev er to secu re the hard d rive tray . B A[...]

Chapter 2: Setting Up 35 2.5 Installing the Slim FDD (Opt ion) 1. Locate th e two FDD rails and s crews from the FDD kit. Secu re the two rail s to FDD u sing four sc rews. 2. Connec t the FDD bac kplane to F DD using 2 screws . 3. Connec t the FFC cab le to FDD. 4. Usin g a screw dri ver to pull ope n the door of FDD tray . FDD Rails & S crews[...]

36 Chapter 2: Setti ng Up 5. Insert FDD module into t he tray . 6. Loca te the FDD cable from FDD kit. Connect the wrinkle side to t he connector on fl oppy slot. Refer to the picture below for the correct direction. Then, conne ct the power cable of FDD to the co nnector on fl oppy slot. 7. Connec t the other s ide to the co nnector on m otherboar[...]

Chapter 2: Setting Up 37 2.6 Installing the CD-ROM or DVD-ROM (for B2881G24S4-LC only) Follow the se instructions to install the slim CD-ROM. 1. Use a screw driver to pull open t he door of CD- ROM drive bay . 2. Befor e connecting t he CD-ROM bac kplane to CD _ROM drive, first co nnect the tw o white buffers to the backpl ane with 2 sc rews (A). T[...]

38 Chapter 2: Setti ng Up 3. Insert t he CD-ROM drive i nto the chas sis 4. Connec t the CD-ROM power and data ca bles. Powe r Ca ble Data Cable[...]

Chapter 3: Replacing Pre-Installed Components 39 Chapter 3: Replacing Pre-Inst alled Components 3.1 Intr oduction This ch apter exp lains how to replace pre installed comp o- nents including the motherboa rd, LED contro l board, HDD, and CD-ROM drive. T ak e note of the precautio ns in thi s section when ins talling your sys tem. 3.1.1 Work Ar ea M[...]

40 Chap ter 3: Repl acing Pre-Inst alled Co mponents 3.1.3 Precautions Components a nd electron ic circuit boar ds can be dam aged by static electricit y . Working on a sys tem that i s connecte d to a power suppl y can be extre mely dangerous. Fo llow the guideli nes belo w to avoid dam age to the Transpor t G T24 or injury to yourself. • Groun [...]

Chapter 3: Replacing Pre-Installed Components 41 3.2 Disassembly Flowchart The fol lowing flowchar t outlines the disassembl y procedure . Rear Components Chassis rear cover Air duct Mainboard DIMMs CPU/heatsink assembly PCI card Mainboard Power supply Front Compone nt s FA N PCBs M1012 Adapter Board Control Board Chassis rear cover CD-ROM HDD Back[...]

42 Chap ter 3: Repl acing Pre-Inst alled Co mponents 3.3 Removing the Cover Before replacing any parts you must rem ove the chas sis cover . Follow the se instructions to remove the cover of the T ranspo rt G T24 chassis cover . 1. Releas e the scr ew and then sl ide the co ver in the d irec- tion of ar row . 2. Lift the c over in the direction of [...]

Chapter 3: Replacing Pre-Installed Components 43 3.4 Replacing Mother board Components Follow these instruc tions to re place motherb oard compo- nents, in cluding the motherbo ard. 3.4.1 Disconnecting All Motherboard Cables Before replacing the motherboard or certain comp onents, remove cables co nnected to the motherbo ard. Follo w these instru c[...]

44 Chap ter 3: Repl acing Pre-Inst alled Co mponents 4. Disconn ect all fan p ower cables.[...]

Chapter 3: Replacing Pre-Installed Components 45 3.4.2 Removin g the Mother board Follow these instruct ions to remove the motherbo ard from the chassis when all add -on compone nts have been removed. 1. Remov e the eleven screws sec uring the mother board to the chas sis. 2. Remov e the motherb oard.[...]

46 Chap ter 3: Repl acing Pre-Inst alled Co mponents 3.5 Replacing the LED Control B oard Follow these instr uctions to remove the LED control board. 1. Rem ove the 2 sc rews secu ring the LED co ntrol boar d to the chas sis. 2. Pu ll the LED c ontrol board fr ee from the chassis a s shown bel ow. 3. Unplug the front panel r ibbon cabl e from the c[...]

Chapter 3: Replacing Pre-Installed Components 47 4. Unplug the USB cab le from the conn ector . 5. Remov e the three s crews securing th e LED contro l board to the bracket 6. Releas e the LED control boa rd from the chassis. After replaceme nt, insert and secur e the unit to the chassis fol - lowing th e reverse pr ocedures fr om step 1~5.[...]

48 Chap ter 3: Repl acing Pre-Inst alled Co mponents 3.6 Replacing the M1012 Adapter Board 1. Rem ove all the cables con nected to the a dapter boar d, includi ng front panel, U SB, LAN, power and five fa n cables. 2. Remov e the five s crews to rele ase the adapte r board. Refer to page 49 for the loc ation.[...]

Chapter 3: Replacing Pre-Installed Components 49 3.6.1 M1 012 Adapter Board Featu res J16: LC M Co nnecto r J7:Fa n T ach & PW M Connec tor J5: Fa n Connec tor J9: Fa n Connec tor J11: Fan Con nector J10: Fa n Connec tor J2: F ront Pane l Connec tor J6: Fa n Connec tor FDD2: Slim FDD Connector J15: LCM Connector PW2: Pow er Connecto r JP1: F an[...]

50 Chap ter 3: Repl acing Pre-Inst alled Co mponents 3.6.2 M1 012 Adapter Board Conne ctor Pin Defin ition J1 TYFP Front Pane l Connecto r J2 Front Panel Conne ctor 1 HDLED+ 2 PW_LED+ 3 HDLED - 4 PW_LED - 5 RESET - 6 PWR_SW+ 7 RESET+ 8 PWR_SW - 9 VOL T AGE5 10 WLED+ 1 1 EXT _INT 12 WLED- 13 V5SB 14 KEY PIN 15 ICH_SMBDA T 16 GND 17 ICH _SM BCLK 18 I[...]

Chapter 3: Replacing Pre-Installed Components 51 J3 LAN/I D LED Co nnector F AN Signal Related Connec tor Pin Definition NOTE: The F AN signa l naming is based on HW circ uit desi gn only . It mi ght be dif ferent from the sys tem fan n aming. J 4 Fan T ACH & PWM Connector J7 Fan T AC H & PWM Co nnector J8 PWM Co nnector 1 LAN1_L ED+ 2 LAN1[...]

52 Chap ter 3: Repl acing Pre-Inst alled Co mponents J13 Fan TACH Connector J14 Fan TACH Connector J6 F an Connect or 1 GND 2 F AN1_T ACH 3 GND 4 F AN2_T ACH 5 GND 6 F AN3_T ACH 7 KEY PIN 8 NC 1 GND 2 F AN1_T ACH 3 GND 4 F AN2_T ACH 5 GND 6 F AN3_T ACH 7 GND 8 F AN4_T ACH 9 GND 10 F AN5 _T ACH 1 1 GND 12 F AN6_T ACH 13 GND 14 F AN7_T ACH 15 GND 16 [...]

Chapter 3: Replacing Pre-Installed Components 53 J10 Fan Connec tor J11 Fan Connec tor J9 F an Connect or 1 F AN3_12VPW M 2F A N 3 _ T A C H 3G N D 4G N D 5F A N 4 _ T A C H 6 F AN4_12VPW M 1 F AN5_12VPW M 2F A N 5 _ T A C H 3G N D 4G N D 5F A N 6 _ T A C H 6 F AN6_12VPW M 1 F AN7_12VPW M 2F A N 7 _ T A C H 3G N D 4G N D 5F A N 8 _ T A C H 6 F AN8_[...]

54 Chap ter 3: Repl acing Pre-Inst alled Co mponents J5 F an Connect or J15 & J 16 LCM C onnectors JP1 Fan Input Sele ct Connector JP2 Fan Input Sele ct Connector 1 F AN9_12VPW M 2F A N 9 _ T A C H 3G N D 4G N D 5 F AN10 _T ACH 6 F AN10 _12VPWM 1 LC M_+5V 2 LCM _SIN 3 KEY PIN 4 GND 5 LCM_+5VSB 6 LCM_SOUT Pin1 & Pin 2 Close Fan PWM s ignal f[...]

Chapter 3: Replacing Pre-Installed Components 55 3.6.3 S ystem Fan Layout The fol lowing pict ure provi des the infor mation for s ystem fan layout. Refer to the tables o n p.56 for co nnection.[...]

56 Chap ter 3: Repl acing Pre-Inst alled Co mponents System Fan S peed Control Sign al Syste m Fan Monit oring Signal M1012 Ada pter Boar d Connect to Motherbo ard J8 PWM C onnector Æ F AN6 Connector Barebone Sy stem Fan Connec t to Mother board Fa n Fan 1 (Fan J 13) Æ Fan 8 Fan 2 (Fan J 13) Æ Fan 9 Fan 3 (Fan J 14) Æ Fan 3 Fan 4 (Fan J 14) Æ [...]

Chapter 3: Replacing Pre-Installed Components 57 3.7 Replacing the SA T A or SCSI Backp lane NOTE: The pr ocedures for replacing S A T A or SCSI back- planes are the same . The follow ing sect ion appli es to B2891G 24S4H model o nly . Y ou may r erfer to th e following sectio n for SCSI ba ckplane r eplacement. 1. Rem ove the 3 sc rews securi ng t[...]

58 Chap ter 3: Repl acing Pre-Inst alled Co mponents 3. Remov e the ten screws th at secure the bra cket to the adapter board . 4. Releas e the adapter board free from the brac ket. 5. Replac e the unit to the chassi s following t he reverse p ro- cedure s from step 1 to 4 after done.[...]

Chapter 3: Replacing Pre-Installed Components 59 3.7.1 S-A T A Backplane ( M1204) Feat ures U4, SA T A 4 Connector U3, SA T A 3 Connector U2, SA T A 2 Connector U1, SA T A 1 Connector HDD Active LED HDD Power LED[...]

60 Chap ter 3: Repl acing Pre-Inst alled Co mponents PW1 Power Conne ctor J4, SA T A 4 Connec tor J3, SA T A 3 Connecto r J2, SA T A 2 Connec tor J1, SA T A 1 Connec tor J4, HDD Access LED Connector 1 JP1, HDD Access LED Connector 2 PW2 Power Conne ctor[...]

Chapter 3: Replacing Pre-Installed Components 61 M1204 HDD A ccess LED Connector Pin Definition J 4: HDD Access L ED Connector NOTE : This i s a normal HDD a ccess LED conne ctor . It just passes thro ugh the LED signal f rom SA T A c ontroller . J P1: HDD Acc ess LED Conne ctor NOTE : This is a HDD access LED c onnector with reverse signal circuit[...]

62 Chap ter 3: Repl acing Pre-Inst alled Co mponents 3.7.2 SCSI Back plane (M1205 ) Feature s SCSI 4 Connector SCSI 3 Connector SCSI 2 Connector SCSI 1 Connector HDD Active LED HDD Power LED[...]

Chapter 3: Replacing Pre-Installed Components 63 PW1 Power Connector SCSI Dat a Connector Switch, ID s elect or Start-M ode se lect PW2 Power Conne ctor[...]

64 Chap ter 3: Repl acing Pre-Inst alled Co mponents M1205 HDD Start-Mode & ID Sel ection Switch SW1 & S W2 HDD S tart-Mode Sel ection Swi tch Case SW1 (DL YD_ST ART) SW2 (RMT_ST ART) Motor Spin Func- tion 1 OFF OFF Motor s pins up a t D. C. p owe r on . 2* ON OFF Motor spin s up at D.C. po wer on af ter a dela y in secon ds 12 time s** the[...]

Chapter 3: Replacing Pre-Installed Components 65 SW3 & SW4 HDD ID Selec tion S witch Case SW3 SW4 ID Sequence (lef t to right in front view) 1 OFF OFF SCSI ID # 0, 1, 2, 3 2* ON OFF SCSI ID#4, 5, 6 , 7 (Please n otice tha t, in this case, HDD SCSI ID#7 will conflict with SCSI controller ID) 3 OFF ON SCSI ID#8, 9, 1 0, 1 1 4 ON ON SCSI ID#12, 13[...]

66 Chap ter 3: Repl acing Pre-Inst alled Co mponents 3.8 Replacing the Power Supply 1. Remov e the two screws that s ecure the power supp ly to the chas sis. 2. Remov e the screw tha t secure the fan assembly to th e chassi s[...]

67 Appendix I: B IOS Differences The BIOS of B2881 is similar to th e BIOS o f S2881. There is only on e menu differe nt. Y o u may refer to the attached moth- erboar d manual for the complete BIOS i nformation. T he dif- ferenc es between B2 881 and S2 881 is on the “Advanc ed/Hardware Health Informa tion” menu. See the fol- lowing fo r the di[...]

68 Tabl e of D iffe rences S288 1 B2881 F AN1 S pee d, F AN2 S peed F AN3 S pee d, F AN4 S peed F AN5 S pee d, F AN6 S peed F AN7 S pee d, F AN8 S peed F AN9 S peed F AN1 S peed, F AN2 S peed F AN3 S peed, F AN4 S peed FA N 5 S p e e d[...]

69 Appendix II: Cable Connection T ables SA T A Cable F AN Ca ble T able 1: B2 881G24S4 -LC M odel HDD Drive Connect to Motherboard HDD1 Æ SA T A0 HDD2 Æ SA T A1 HDD3 Æ SA T A2 HDD4 Æ SA T A3 T able 2: System Fan to M1012 Adapter Board System F an Connect to M1012 Fan 1 Æ J6 Fan C onnecto r Fan 2 Æ J10 Fan C onnecto r Fan 3 Æ J1 1 Fan Con ne[...]

70 Power Supply Cabl e The Other Cable T able 6: M1012 Adap ter Board t o Motherboard T a ble 7 : M100 3 Fr ont Pa nel Co ntr ol Bo ard Re late d Cab le T able 8: Chassi s Intrusion Ca ble T able 4: Power Supply to Motherboard Pow er Supp ly Conn ect to Mot herbo ard P1 24 -pin po wer ca ble Æ J41 24-pin connecto r P2 8-pin po wer cable Æ J26 8-p[...]

71 T able 9: FDD Related Cable (Opti on) T able 10: CD-ROM Related Cable (Opti on) Mother board FD D connecto r Æ FDD Backpl ane Power Supp ly P5 Æ FDD Backplane Motherbo ard IDES conn ector Æ CD-ROM Backpl ane M1012 J 19 power connecto r Æ CD-ROM Backpl ane[...]

72 T echnical S upport If a proble m arises with yo ur system, you sho uld first turn to your d ealer for dir ect suppor t. Y ou r system h as most likely been con figured or designed by them and t hey should have the best idea of wha t hardware an d software your s ystem contains. H ence, they s hould be of the most ass istance for you. F urthermo[...]

73 3. Contact yo ur deale r for help BE FORE calli ng TY AN. 4. Check the TY AN us er group: alt. comp.periph s.main- board.T Y AN Return ing Merc handise fo r Service During the warranty period, co ntact your distributo r or system vendor FIRST for an y product pro blems. This warranty only covers normal cus tomer use a nd does not c over damage s[...]

74[...]