Uniden CT301 manual

CT301 Cordless Telephone OPERATING GUIDE For Australia and New Zealand unid~n@ -- --- -_.- ----[...]

Important Safety Instructions When using your telephone equipment, basic safety precautions should always be followed to reduce the risk of fire, electric shock and injury to persons, including the following: 1. Read and understand all instructions. 2. Follow all warnings and instructions marked on the product. 3. Unplug this product from the wall [...]

9. Do not overload wall outlets and extension cords as this can result in the risk of fire or electric shock. 1 O.Never push objects of any kind into this prod- uct through cabinet slots as they may touch dangerous voltage points or short out parts that could result in a risk of fire or electric shock. Never spill liquid of any kind on the product.[...]

CAUTION: TO REDUCE THE RISK OF FIRE OR INJURY TO PERSONS BY THE BATTERY, READ AND FOllOW THESE INSTRUCTIONS. 1. Use only the appropriate type and size battery pack specified in the instruction manual pro- vided for this product. 2. Do not dispose of the battery pack in a fire. The cell may explode. 3. Do not open or mutilate the battery pac~ Releas[...]

About Your CT301 Congratulations on your purchase of the Uniden CT301 Cordless Telephone. The CT301 has been designed and engineered to exacting standards for reliability, long life, and outstanding performance. To get the most from your CT301 , please take a moment to read this Operating Guide thoroughly. Its many features include . Compander Circ[...]

Nickel-Cadmium Battery Warning . This equipment contains a Nickel-Cadmium Battery. . Nickel-Cadmium Batteries must be disposed of properly. . The Nickel-Cadmium Battery contained in this equipment may explode if disposed of in a fire. . Do not short circuit the battery. . Do not charge the Nickel-Cadmium Battery used in this equipment in any other [...]

Handset Controls & Functions 0-9,*,# Buttons - Used for dialing numbers. TALK Button - Places the Handset into Talk mode or back to Standby. BA TT LO LED - Lights when the Handset is in the Talk mode. Flashes when the battery pack is Iow . and needsto be recharged. Handset Antenna - User replaceable flexible antenna provides maximum range. Rech[...]

BA TT LO LED TALK Button * (TONE) BUTTON TEL Line DC IN 9V I TIP Switch (Australian Model only) D Handset Antenna F (FLASH) Button R (Redial) ) Button 0 - 9, * (TONE), # BUTTON uniden Q Rechargeable Battery Pack (Rear) Battery Charge Contacts Base Antenna -8-[...]

Installing Your CT301 Selecting the Installation Location You should carefutly select the installation location for freedom from excessive heat or humidity (as in a kitchen or bathroom), and away from sources of electrical noise, (such as motors or fluorescent lighting). Provide sufficient space to safely extend the Base Unit antenna fully, and con[...]

Reversing the Handset Retainer 1. Remove the Handset Retainer from the Base Unit by sliding it upward. 2. Flip the Retainer over so the tab is facing up. 3. Slide the retainer back into the Base Unit. NOTE: If you put the Retainer back into the Base Unit incorrectly, it will jam, and you'll need to pry it up with a screwdriver. Connecting the [...]

3. Place the battery pack into the battery compartment. 4. Replace the cover by sliding it on. Make sure not to get the wires from the battery pack caught in the cover. Charging the Battery Pack The rechargeable Ni-Cd battery pack included with your CT301 needs to be charged for approxi- mately 12-16 hours before first use. Place the Handset in the[...]

Using Your CT301 Dialing a Number To dial a number with your CT301, first remove the Handset from the cradle. Next, press the TALK button. The BATT LO LED will then light. Dial the number normally, using the number buttons on the Handset. When "donetalking, you can press the TALK button again to hang up, or simply place the Handset back in the[...]

Note: If you don't place the Handset back on the Base Unit, you need to press the TALK button to hang up the phone. You may find that sometimes pressing the TALK button does not hang up the phone, and the error tone will sound continuously. This may occur during conversations under noisy condi- tions. If this occurs, place the Handset back on [...]

Care & Mai ntenance Troubleshooti ng If your CT301 Cordless Telephone is not perform- ing up to your expectations, please try these simple steps. If you are still unable to resolve the problems, contact Uniden Customer Service at: Australia (02)559-3100,New Zealand (09)273-8383, during business hours, Monday through Friday. The battery charge c[...]

Problem Charge light won't come on when Handset is placed in the cradle. Audio sounds weak and/or scratchy. Check Make sure that the Base Unit AC power cord is plugged both into the wall outlet, and into the Base Unit. Make sure the Ni-Cd battery pack is plugged into the Handset. Make sure the Handset is properly seated in the cradle. Clean th[...]

Important Electrical Considerations CAUTION: Electrical energy can perform many useful functions. The CT30 1 has been designed and manufactured to assure your personal safety. Improper use can result in potential electrical shock and fire hazards. Please carefully read all safety and operating instructions before installa- tion and use. Keep these [...]

Telephone Line Problems If you are having trouble with your telephone service, you must first disconnect the CT301 to determine if it is the cause of your problem. If you determine that it is the cause, you must leave it disconnected until the trouble has been corrected. Radio Interference Radio interference may occasionally cause buzzing and hummi[...]

Specifications General Frequency Control Crystal controlled trans- mission FM -10°C to 50°C Modulation Operating Temp Base Receive Frequency Transmit Frequency Power Requirements Size Weight Handset Transmit Frequency Receive Frequency Power Requirements Size Weight Battery Capacity Talk Mode Standby 39.775 to 40.000 MHz (1 Channel) 30.075 to 30.[...]

-17 - r CUT I I ~$- I I C~~ Wall mount template I IMPORTANT: I Before mounting, select a wall area of sufficient - ffi L strength. If mounting on wallboard or in an W I area of ques~ionable strength, locate a stud for I maximum support of your telephone. I I ;;'iIO- - -18- -...[...]

WARRANTY UNIDEN CT301 1 YEAR WARRANTY (Batte~ies and Accessories are covered for 90 Days ONLY) Note: Please keep your sales docket as it provides evidence of warranty. Warranty is only valid in the country where the product has been purchased. WARRANTOR: Uniden Australia Pty. Limited ACN 001 865 498 Uniden New Zealand Limited ELEMENTS OF WARRANTY: [...]

unid~n Quality goes the Distance UDZZO1366ZA Printed in Hong Kong ""[...]