Uniden WDECT WDECT3315 manual

WDECT3315 WDECT3315+1 Series Owner ’s Manual OWNER’S MANUAL[...]

[...]

[ i ] INSTALLATION & SAFETY • This symbol indicates important operating and servicing instructions. • The earcap of this telephone may attract and retain small metallic objects. 3 AVOID - connecting more than phones as ringing may be impaired AVOID - multi power boards. CHARGE - the new phone for 15 - 20 hrs. AVOID - Moisture Don’t - over[...]

[ ii ] CONTENTS INSTALLATION & SAFETY i CONTENTS ii GETTING STARTED 1 Controls and Functions 1 Welcome 2 Features 3 Terminology 3 Mounting the Base Unit on a Wall 4 Battery Maintenance 5 Installing the Beltclip 6 Headset Installation 7 Display and Icons 7 About the Menu Options 8 Setting up the Menu 11 BASICS 18 Making and Receiving Calls 18 Ke[...]

G E T T I N G S T A R T E D [ 1 ] CONTROLS AND FUNCTIONS 2 1 3 5 4 6 7 8 9 10 11 12 22 15 13 18 19 16 20 21 17 14 1. Handset Antenna 2. Headset Jack Cover 3. Beltclip Hole 4. Hands-Free Speaker 5. Handset Battery Compartment 6. New Message LED 7. Handset Earpiece 8. LCD Display 9 . /del K ey 10. /vol/ / Key a. ringer volume control b. scroll keys f[...]

[ 2 ] Congratulations on your purchase of the Uniden Multi-Handset Cordless System telephone. This unit is different from conventional cordless telephones. When the base unit is connected to AC power and a telephone line, it can support up to 4 handsets. Using extra handsets, you can establish a 3-way conference call (2 handsets and an outside line[...]

[ 3 ] Throughout this manual, terms such as Standby and Talk Mode are used. Below is the terminology explanation. Standby Mode - The handset is not in use, is off the cradle, and or speaker has not been pressed. A dial tone is not present. Talk Mode - The handset is not in the cradle and or speaker has been pressed enabling a dial tone. “ Talk ?[...]

[ 4 ] MOUNTING THE BASE UNIT ON A WALL You can mount your base directly to the wall. Before doing this, consider the following: • Avoid electrical cables, pipes, or other items behind the mounting location that could cause a hazard when inserting screws into the wall. • Mount your phone within distance of a working phone jack. • Make sure the[...]

[ 5 ] BATTERY MAINTENANCE Cleaning the battery charging contacts To maintain a good charge, it is important to clean the charging contacts on the handset once a month. Use a dry cloth or pencil eraser to clean. Battery use time (per charge) Fully charged • Up to 7 hours continuous use. • Up to 10 days when the handset is in the standby mode (up[...]

[ 6 ] INSTALLING THE BELTCLIP To attach the beltclip Insert the beltclip into the holes on each side of the handset. Press down until it clicks into place. To remove the beltclip Pull either side of the beltclip to release the tabs from the holes. Battery replacement and handling When the operating time becomes short, even after a battery is rechar[...]

Talk Privacy icon appears when the Privacy Mode is turned on. [ 7 ] Your phone may be used with an optional headset, the Uniden HS910. To use this feature, insert the headset plug into the headset jack. Your phone is ready for hands- free conversations. Headset is available through Uniden authorized retailers. HEADSET INSTALLATION DISPLAY AND ICONS[...]

[ 8 ] There are 5 main menu options, ( DirectLink Mode, Room Monitor, Handset Setup, Global Setup and System Reset ) and submenu options. Summary of the Main Menu and Submenu Two Way Communication between the Handsets Anywhere without the Base (DirectLink) DirectLink Mode allows a pair of handsets to work without the base unit, for direct handset-t[...]

[ 9 ] Handset Setup The following submenu options must be set separately for each handset. Submenu name Description Edit Voice Mail Program or delete the voice mail access number (see page 12). Ringer Tones Adjusting the ringer tone (tone your phone makes when ringing) (Default is Flicker) (see page 13). Set the distinctive ring (see page 13). “D[...]

[ 10 ] Global Setup If you change one of the Global settings, you change the setting for all additional handsets. Only one handset can change Global settings at a time. Submenu name Description Name Tag (POP ID) Display the stored name with the Caller ID telephone number, if the displayed Caller ID telephone number is exactly the same as (Default i[...]

[ 11 ] Entering the Menu 1) Press the /del key in standby mode. 2) Use /vol/ or /vol/ to move the pointer to a desired main menu ( DirectLink Mode, Room Monitor, Handset Setup, Global Setup, and System Reset ). 3) Press to select the desired main menu. 4) Use /vol/ or /vol/ to select a desired submenu, and then press to enter. In the submenu, use /[...]

[ 12 ] Room Monitor Using Room Monitor 1) Enter the Room Monitor menu (see “Entering the Menu” on page 11). To Room Monitor appears. 2) Select the handset you want to monitor by using /vol/ or /vol/ . 3) Press . Room Monitor appears, and you hear sounds in the room where the handset is installed. 4) To finish the Room Monitor, press or return t[...]

Selecting a Ringer Tone 1) Enter the Handset Setup menu, and then the Ringer Tones submenu (see “Entering the Menu” on page 11). There are 10 ringer tones or 10 Polyphonic Tones to choose from. - Ringers [Flicker, Clatter, Soft Alert, Wake Up, Light Bug, Beep Boop, Tone Board, Chip Chop, Party Clap, Reminder] - Polyphonic Tones [Beethoven’s S[...]

Setting the Anykey Answer 1) Enter the Handset Setup menu, and then the Anykey Answer submenu (see “Entering the Menu” on page 11). 2) Press /vol/ or /vol/ to select On or Off . 3) Press . You will hear a confirmation tone. Setting the True Banner 1) Enter the Handset Setup menu, and then the Banner submenu (see “Entering the Menu” on page [...]

Global Setup Setting Name Tag (POP ID) 1) Enter the Global Setup menu, and then the Name Tag submenu (see “Entering the Menu” on page 11). 2) Press /vol/ or /vol/ to change the selection, On or Off . 3) Press . You will hear a confirmation tone. Setting Insert Zero (New Zealand only) 1) Enter the Global Setup menu, and then the Insert 0 submenu[...]

[ 16 ] Setting the Dial Mode (Australia only) 1) Enter the Global Setup menu, and then the Dial Mode submenu (see “Entering the Menu” on page 11). 2) Press /vol/ or /vol/ to change the select, Tone or Pulse (the initial setting is Tone). 3) Press . You will hear a confirmation tone. Copy Phonebook 1) Enter the Global Setup menu, and then the Co[...]

[ 17 ] System Reset De-register the Handset 1) Enter the System Reset menu, and then the Deregister HS submenu (see “Entering the Menu” on page 11). 2) Press /vol/ or /vol/ to select the handset ID to be de-registered from the list, and then press . Deregister HS? appears. 3) Press /vol/ or /vol/ to select Yes . 4) Press . You will hear a confi[...]

This handset has a built-in speakerphone that allows you to have a hands-free conversation. This feature allows you to communicate easily while performing other tasks, such as cooking. appears during hands-free conversations. You can easily switch a call from normal conversation to hands-free conversation. To switch a call, press speaker during the[...]

The Keypad Lock prevents user from pressing the keypad accidentally. You can still answer calls, and receive page and phonebook locations, and the keypad lock is reactivated after the operation. To lock the keypad Press and hold tone until you hear a confirmation tone. Keypad Locked appears. If anykey is pressed when keypad is locked, To unlock key[...]

The last thr ee phone numbe rs dia led can be qui ckl y redi aled. Redialing from Standby Mode 1) Press redial/pause in standby mode. 2) Press redial/pause again. Each press of redial/pause will display one of the last three numbers dialed. 3) Press or speaker . The selected number is dialed. 4) To hang up, press . Redialing from Talk Mode 1) Press[...]

[ 21 ] A D J U S T I N G T H E H A N D S E T R I N G E R , E A R P I E C E A N D S P E A K E R V O L U M E Handset ringer volume Press the volume up key or volume down key (labeled as /vol/ or /vol/ ) in standby mode to select one of three ringer volume (off, low, or high). Earpiece and speaker volume Pressing the volume up key or volume down key ([...]

During a call, as you begin to move your handset too far from your base unit, noise may increase. If you pass the range limits of the base unit, you will hear a beep and see Out of Range on the display, and then the handset returns to standby mode. You may return to the call if you move your handset within the range limits of the base and press or [...]

If you encounter interference while using your phone, you can manually improve the sound by setting the Clarity Booster to on. This works only when the phone is in use . 1) Press /del during talk time (while phone is in use). 2) Press /vol/ or /vol/ to move the pointer to Clarity Boost , and then . Boost On and B appear in the display. To turn Off [...]

[ 24 ] FIND HANDSET To locate the handset, press on the base when the base is in standby mode. All registered handsets beeps for 60 seconds, and “ Paging ” appears on the handset display. To cancel paging, press any key on the handset or on the base. FLASH AND CALL WAITING If you have Call Waiting service and a call waiting tone sounds during a[...]

[ 25 ] USING ONE TOUCH VOICE MAIL ACCESS If you subscribe to voice mail service, you can use your phone to access your voice mailbox. The new message LED flashes whenever you have messages waiting in your voice mailbox. Just program the handset with your access number, and you can get your messages at the touch of a button on the handset. (The voic[...]

PHONEBOOK [ 26 ] The Phonebook allows you to dial a number using just a few key presses. Your phone stores names/numbers in the phonebook memory location, and you can search names in alphabetical order. You have a total of 100 locations that can be used for the phonebook (including the speed dials) and Caller ID messages. 1) When the phone is in st[...]

[ 27 ] 6) Distinctive Ring appears. Press /vol/ or /vol/ to move the pointer to one of the Distinctive Ring options, and then press . 7) Speed Dial appears. Press /vol/ or /vol/ to move the pointer to select the Speed dial location (10 locations: SPD1-SPD0). 8) Press . You will hear a confirmation tone, and Done! appears in the display. If you choo[...]

[ 28 ] ST EPS FOR ENT ERI NG N AME S AN D S PECI AL CHAR ACT ERS Refer to the letters on the number keys to select the desired characters. With each press of a number key ( - ), the displayed character appears in the following order: upper case letters first, lower case letters next and finally the number corresponding to the key. Number of times k[...]

[ 29 ] If the next character uses the same number key, you must press to move the cursor over. Otherwise the next time you press the number key, it changes the character that was previously set. If you make a mistake while entering a name Use tone or to move the cursor to the incorrect character. Press /del to erase the wrong character and then ent[...]

[ 30 ] During a call, don’t press or the call will be disconnected. VIEWING THE PHONEBOOK Your phone stores names/numbers in the phonebook memory locations, and you can search names in alphabetical order. You can view the phonebook even while the phone is in use. 1) Press phonebook . If you recall the phonebook during a call, Store [SELECT] will [...]

[ 31 ] MAKING CALLS USING THE PHONEBOOK From Standby Mode 1) When the phone is in standby mode, view the phonebook location to dial (see “Viewing the Phonebook” on page 30). 2) Press o r speaker . The displayed number is dialed. 3) To hang up press . From Talk Mode 1) Press or speaker . 2) View the phonebook location to dial (see “Viewing the[...]

[ 32 ] 1) When the phone is in standby mode, press phonebook . 2) Press /vol/ or /vol/ , or the number keypad to view the phonebook locations (see “Viewing the Phonebook” on page 30). a. Editing the Stored Data 1) When the phonebook location to be edited appears, press . Store/Edit Name appears. 2) Follow the steps 3 to 7 under “Storing Phone[...]

[ 33 ] CHAIN DIALING The memory locations in the handset are not limited to phone numbers. You can also store a group of numbers (up to 20 digits), that you need to enter once your call connects. This is referred to as Chain Dialing. An example of this is a bank account number. Store the account or special number in one of the phonebook locations. [...]

[ 34 ] You must subscribe to Caller ID services through your local telephone provider to use these features. When the telephone rings, the Caller ID feature allows you to view the caller’s name, and phone number along with the date and time of call. Additionally, you can dial a number stored in the Caller ID list or save data to your Phonebook lo[...]

[ 35 ] VIEWING THE CALLER ID LIST The Caller ID list stores information for incoming calls - even unanswered calls. You can store 100 of the Caller ID messages and Phonebook locations (including SpeedDials) in total. You can view the Caller ID list during a call or when the phone is in standby mode. 1) Press . The summary screen appears. The screen[...]

[ 36 ] Deleting Information from the Caller ID List 1) When the phone is in standby mode, view the Caller ID information to be deleted (see “Viewing the Caller ID List” on page 35). 2) Press /del . Delete Caller ID appears. 3) Press /vol/ o r /vol/ to choose Yes . 4) Press . You will hear a confirmation tone. Deleting all Caller ID names/number[...]

[ 37 ] Calling a party from the Caller ID list From Standby mode 1) When the phone is in standby mode, view the Caller ID message (see “Viewing the Caller ID List” on page 35). 2) Press or speaker . The displayed phone number dials automatically. From Talk mode 1) Press or speaker . 2) View the Caller ID message you want to dial (see “Viewing[...]

EXPANDING YOUR PHONE [ 38 ] • To use the WDECT3305, register it to the original base. • Save this manual for detailed operation. • All of the handsets ring when a call is received. 4 Multi-Handset Expendability Your phone supports up to 4 handsets (including the handset(s) supplied with your phone). You can now place a fully-featured cordless[...]

[ 39 ] REGISTER THE HANDSET If you purchase an extra handset, you need to register the handset to the base before use. Only one handset can be registered at a time. The handset ID for the supplied handset(s) was assigned at the factory, which has #1 or #2 in the display (#2 for models that have two handsets in packaging). When you register addition[...]

[ 40 ] To use this feature, you must enter the two handsets into the DirectLink mode first. To enter the DirectLink mode - See page 11 This feature allows you to monitor sounds in another room. To use this feature, place the handset in the desired room to monitor (act an remote mic), and place the other near listener (remote speaker). For instructi[...]

The phone permits 3-way conversations between 2 handsets, and an outside line. 1) During a call, press on another handset to initiate the 3-way conversation. 2) To remove either caller from your conversation, press key on either handset. The other handset will still be connected to the call. [ 41 ] 3-WAY CONFERENCING INTERCOM/CALL TRANSFER FEATURE [...]

[ 42 ] Call Transfer Feature 1) During a call, press /transfer/int’com . 2) Select a handset to transfer the call within 10 seconds. (Refer to step 2 in the intercom section on page 41). The call will automatically be placed on hold, and an intercom tone sounds. To cancel the transfer, press or speaker on the initiating handset. 3) On the receivi[...]

[ 43 ] The digital security code is an identification code used to connect the handset and the base unit. Normally, setting the code is not necessary. In the rare situation that you suspect another cordless telephone is using the same security code, you can change the code. To change the digital security code: 1. Perform the “System Reset” menu[...]

[ 44 ] NOTE ON POWER SOURCES Battery replacement and handling When the operating time becomes short, even after a battery is recharged, please replace the battery. With normal usage, your battery should last about one year. Please contact your place of purchase or the Uniden Parts Department for a replacement battery. Warning To avoid the risk of p[...]

[ 45 ] TROUBLESHOOTING If your phone is not performing to your expectations, please try these simple steps first. Symptom Suggestion The charge LED won’t illuminate • Make sure the AC adapter is plugged into the base and wall outlet. when the handset is placed in • Make sure the handset is properly seated in the cradle. the cradle. • Make s[...]

Symptom Suggestion Severe noise interference. • Keep the handset away from microwave ovens, computers, remote control toys, wireless microphones, alarm systems, intercoms, room monitors, fluorescent lights, and electrical appliances. • Move to another location or turn off the source of interference. The Caller ID does not display. • The hands[...]

[ 47 ] INDEX 0 - 9 3-way conferencing ................... 4 1 20 ring options .......................... 13 A Anykey answer .......................... 1 4 AutoTalk .................................... 13 B Banner ...................................... 14 Battery Replacement and handling ..... 44 Beltclip ........................................ 6 B[...]

[ 48 ] One Year Limited Warranty UNIDEN WDECT3315 / WDECT 3315+1 CORDLESS PHONE Important: Evidence of original purchase is required for warranty service. Warrantor: Uniden Australia Pty Limited A.B.N. 58 001 865 498 Uniden New Zealand Limited Warranty only available in original country of purchase. ELEMENT OF WARRANTY : Uniden warrants to the orig[...]

NOTES[...]

NOTES[...]

[...]

©2007 Uniden Australia Pty Limited/Uniden New Zealand Limited Part Code UPZZ01457BZ(0) Printed in China[...]