Wagner SprayTech 3000, 3500 manual
- Consulta online o descarga el manual de instrucciones
- 30 páginas
- 1.4 mb
Ir a la página of
manuales de instrucciones parecidos
-
Paint Sprayer
Wagner SprayTech 552478
28 páginas 4.36 mb -
Paint Sprayer
Wagner SprayTech Model 9140
52 páginas 6.77 mb -
Paint Sprayer
Wagner SprayTech EP2205
27 páginas 0.7 mb -
Paint Sprayer
Wagner SprayTech 558052
36 páginas 5.51 mb -
Paint Sprayer
Wagner SprayTech HIGH PERFORMANCE AIRLESS SPRAYER
44 páginas 4.29 mb -
Paint Sprayer
Wagner SprayTech 276040
16 páginas 1.67 mb -
Paint Sprayer
Wagner SprayTech 555000
48 páginas 6.29 mb -
Paint Sprayer
Wagner SprayTech FLEXiO 570
21 páginas
Buen manual de instrucciones
Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Wagner SprayTech 3000, 3500. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Wagner SprayTech 3000, 3500 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.
¿Qué es un manual de instrucciones?
El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Wagner SprayTech 3000, 3500 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.
Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Wagner SprayTech 3000, 3500, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.
Entonces, ¿qué debe contener el manual de instrucciones perfecto?
Sobre todo, un manual de instrucciones Wagner SprayTech 3000, 3500 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Wagner SprayTech 3000, 3500
- nombre de fabricante y año de fabricación del dispositivo Wagner SprayTech 3000, 3500
- condiciones de uso, configuración y mantenimiento del dispositivo Wagner SprayTech 3000, 3500
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas
¿Por qué no leemos los manuales de instrucciones?
Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Wagner SprayTech 3000, 3500 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Wagner SprayTech 3000, 3500 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Wagner SprayTech en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Wagner SprayTech 3000, 3500, como se suele hacer teniendo una versión en papel.
¿Por qué vale la pena leer los manuales de instrucciones?
Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Wagner SprayTech 3000, 3500, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.
Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Wagner SprayTech 3000, 3500. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.
Índice de manuales de instrucciones
-
Página 1
SER VICE/OPERA TION MANU AL Form No. 001-683 FEB2305 Form No. 001-683 FEB2305[...]
-
Página 2
T able of Contents INTRODUCTION Sp ra y & St ri pe S pe ci ca ti on s 1 Safety W arnings 2 GETTING ST ARTED How to Flush 7 Flushing 8 Setting Up 9 Pressure Relief Procedure 10 Daily Maintenance 10 Starting Up 1 1 Striping Operation 12 Striping T ip Guide 13 REP AIRS/MAINTENANCE INSTRUCTIONS Spray Gun Operation 14 Spray Gun T roubleshooting [...]
-
Página 3
Bef ore oper at ing thi s un it, rea d an d fol low all saf ety warn in gs and ins truc tion s rel ated to the usa ge o f thi s eq uipm ent . RE AD, LE ARN , and FOL LOW th e P ress ure Rel ief Proc ed ure on Page 10 a nd und erst and al l w arni ngs on page s 2 thru 6. IMPORT ANT WARNING !! HANDLE THIS UNIT AS Y OU WOULD A L O ADED FIREARM!! High [...]
-
Página 4
TIP GUARD AL W A YS have the tip guard in place on the spray gun while spraying. The tip guard alerts you to the injection hazard and helps prevent accidentally placing your ngers or any part of your body close to the spray tip. SPRA Y TIP SAFETY Use extreme caution when cleaning or changing spray tips. If the spray tip clogs while spraying, eng[...]
-
Página 5
Saf ety War nings Fluids under high pressure from spray or leaks can penetrate the skin and cause extremely serious injury , including the need for amputation. • NEVER point the spray gun at anyone or any part of the body . • NEVER put hands or ngers over the spray tip. Do not use a rag or any other material over your ngers. Paint will pe[...]
-
Página 6
A VOID COMPONENT RUPTURE This sprayer operates at 2500 psi (170 bar). Always be sure that all components and accessories have a maximum working pressure of at least 3000 psi to avoid rupture which can result in serious bodily injury including injection and property damage. • NEVER leave a pressurized sprayer unattended to avoid accidental operati[...]
-
Página 7
WHEN ADDING FUEL • T urn engine OFF and let engine cool at least 2 minutes before removing gas cap. • Fill fuel tank outdoors or in well ventilated area. • Do not overll fuel tank. Fill tank to approximately1 inches below top of neck to allow for fuel expansion. • Keep gasoline away from sparks, open ames, pilot lights, heat and ot[...]
-
Página 8
WHEN TRANSPORTING EQUIPMENT • T ransport with fuel tank EMPTY or with fuel shut-off valve OFF . WHEN STORING GASOLINE OR EQUIPMENT WITH FUEL IN T ANK • Store away from furnaces, stoves, water heaters and other appliances that have pilot lights or other ignition source. They can ignite gasoline vapors. Starting engine creates sparking. Sparking [...]
-
Página 9
Ho w to F lush FIGURE 1 LOCK TRIGGER TO REMOVE SPRA Y TIP 1. Be sure the gun safety latch is engaged and there is no spray tip in the gun. Refer to Fig. 1. Refer to your separate instruction manual provided with your gun on its safety features and how to engage safety latch. 2. Pour enough clean, compatible solvent (or water when using water-base p[...]
-
Página 10
1. New Sprayer Y our Airlessco unit was factory tested in an antifreeze solution which was left in the pump. Before using oil-base paint, ush with mineral spirits only . Before using water-base paint ush with soapy water , then do a clean water ush. 2. Changing Colors Flush with a compatible solvent such as mineral spirits or water . 3. C[...]
-
Página 11
Setting Up to Stripe or Spr ay 1. Connect the hose and gun. a. If the hose is not already installed on the striper , remove the plastic cap plug from the outlet tee at the spray pump, and screw a conductive or grounded 3000 psi airless spray hose onto uid outlet. b. Connect an airless spray gun to the other end of the hose. c. Do not use steel [...]
-
Página 12
Pr essur e R elief Procedur e 1. Keep the displacement pump packing nut/wet cup lubricated with Airlessco TSO (Throat Seal Oil) at all times. The TSO helps protect the rod and the packings. 2. Inspect the packing nut daily . Y our pump has a patented T riple Life Packing System. Packing life will be extended a minimum of three times if the followin[...]
-
Página 13
Star ting Up 1. Lear n ho w to oper ate the control valv e. The control valve sets the prime or pressure position as well as the spraying pressure. When the valve is fully counter -clockwise the unit is in the prime position. As the control valve is turned clockwise, the unit’ s output pressure to the gun is gradually increased until the control [...]
-
Página 14
Striping Oper a tion 1. Choose handle location The choices are, installing the handle opposite of the single wheel assembly (standard set up) or placing the handle directly over the single wheel assembly . The handle location is really a matter of personal preference, however having the handle away from the single wheel assembly allows for easier l[...]
-
Página 15
Striping Tip Guide STRIPING TIP REGULAR P AINTING SPRA Y TIP UNIFORM P A TTERN LIGHT HEA VY Striping Tips should not be used for regular spraying. Striping tips are designed for a single pass application, while spray tips are designed for the 1/3 overlap technique used for spray painting. Spray Tip Replacement: During use high pressure will cause t[...]
-
Página 16
Spr ay Gun Oper a tion Reversible Spray T ip T ip Guard T rigger Guard MAJOR COMPONENTS OF SPRA Y GUN & REVERSIBLE REV -TIP ™ SPRA Y GUN Attach spray gun to airless unit and tighten ttings securely . Set the gun safety latch. (Also may be called gun safety lock, or trigger lock) * The gun safety latch should always be set when the gun is n[...]
-
Página 17
Spr ay Gun T r oubleshooting DEFECTS CA USE CORRECTION Coarse spray Low pressure Increase the pressure Excessive fogging High pressure Reduce pressure for satisfactory pattern (overspray) Material too thin Use less thinner Pattern too wide Spray angle too lar ge Use smaller spray angle tip Pattern too narrow Spray angle too small Use larger spray a[...]
-
Página 18
Field T r oubleshooting PROBLEM CAUSE SOLUTION Unit doesn't prime Airleak due to: • Loose Suction Nut • T ighten Suction Nut • W orn O-Rings • Replace O-Ring (106-01 1) on suction seat, & O-Ring (106- 020) below suction seat • Hole in Suction Hose • Replace Suction Hose (331-290) Stuck or Fouled Balls Service outlet valve sucti[...]
-
Página 19
17 Refer to Figure 1 1. Follow the Pressure Relief Procedure on page 10. 2. Flush the material you are spraying out of the machine. 3. Remove the connecting rod shield (331-1 11). 4. Move the piston rod (331-093) to its lowest position by cycling pump slowly . 5. Remove the retaining ring (331-062) from the connecting rod (331-038) and slide the sl[...]
-
Página 20
Ser vicing the Piston R od - Outlet V alv e 331-196 331-195 Piston DISASSEMBL Y OF THE OUTLET V AL VE REFER T O FIGURE 3 1. Disconnect the Fluid Pump following instructions on page 17 . 2. Place piston holder (331-195) in a vise. Slide piston into the holder & lock in place with a 3/8” dowel (331-196). 3. Use a 1/4” allen wrench to unscrew [...]
-
Página 21
P acking R eplacement Pr ocedur es 19 Fluid Pump Remo val - Refer to Figure 1 1. Follow the Pressure Relief Procedure on page 9. 2. Flush material you are spraying out of the machine. 3. Remove the connecting rod shield (331-1 11). 4. Move the piston rod (331-093) to its lowest position by cycling pump slowly . 5. Remove the retaining ring (331-062[...]
-
Página 22
FIGURE 5 P acking R eplacement Pr ocedur es FIGURE 6 20 3. Push the two bolts (100-318) through the tube spacers (331-074) & screw into the cover assembly (331-234). Using a 1/2” wrench, tighten the two bolts evenly (alternating between them) until you reach 20 ft-lbs. 4. Reassemble lower suction valve assembly by placing the suction seat (33[...]
-
Página 23
I n s p e c t i o n & R e p l a c e m e n t o f C o n t r o l V a l v e , B a l l & S e a t 1. Use a wrench to unscrew the control valve with ring seal. 2. Make sure that the control valve knob turns freely and that its stem is not worn unevenly , mushroomed or otherwise damaged. 3. Remove TC guide, verify that it is unbroken, clean and not[...]
-
Página 24
Gear Bo x Assembl y - Par t No. 305-196 22 Part Number Description 100-004 90 Degree Elbow 100-028 Pipe Plug 100-318 HXHD Screw 100-332 Retaining Ring 100-380 Screw 100-381 Screw 100-398 Retaining Ring 1 12-068 Ball Bearing 1 15-019 Hose Connector 1 17-008 Ball Bearing 305-197 Paint Pump Ass’y 305-199 Shaft Pinion 305-287 Machined End Bell 331-03[...]
-
Página 25
Spr ay Gun Assembl y - Par t No. 305-280 Gun Mount Assembl y - Par t No . 305-275 - 23 Part Number Description 100-01 1 Airless 1/4” x 50’ Hose 1 16-103 Cable Retainer Spring 120-1 15 008 Silver Gun w/o T ip 305-275 Gun Mount Ass’y 305-280 Spray Gun Assembly 561-025 Rev-Tip Male Seal 561-026 Rev- T ip Seal 563-317ST Striping T ip 560-517 Pain[...]
-
Página 26
Bypass V alv e Assembl y Par t No. 305-264 Part Number Description Qty . 100-040 Hose, Whip 2 1 15-016 Control V alve Seat Ass’y 1 1 15-017 Ball 1 1 15-024 Unloader V alve 1 1 15-028 Stat-O-Seal 1 1 15-031 Guide T .C. 1 188-377 Return Tube 1 305-194 PR Regulator Housing 1 24[...]
-
Página 27
Suction Assembl y P ar t No . 331-290 Part Number Description Qty . 106-020 T eon O-Ring 1 141-015 Hose Clamp (some models only) 1 331-034 Suction Nut 1 331-035 Suction Elbow 1 331-217 Suction Filter 1 25[...]
-
Página 28
F r ame Assembl y Par t No. 305-213 Part Number Description Qty . 100-317 Nut 5/16-18 Centerlock 4 100-320 Wing Screw , 3/8 1 100-370 Screw , Hex Cap 2 1 13-031 Spacer , 5/8 x 1.00 2 1 13-032 Axel, 13” 1 1 19-026 Screw Hex Hd 3 136-131 Chain Sash 1 136-133 Key Ring 1 139-053 Handle, Striper 1 140-029 W asher , Flat, 5/16 8 143-028 W asher , Flat,[...]
-
Página 29
REV-GU ARD ™ Part # 560-xxx REV -TIP for Spray Painting 562-xxxST REV -TIP for Striping P O SI -L O C ™ S Y ST E M Snap in centering of tip. No leaks, splashback or mess. S EA L L O CA T I NG HA ND L E T ip handle simplifies installing & aligning the seal. EA SIE ST A SSE MBL Y Fewer parts - Less complicated takes only seconds! I NT ER C HA[...]
-
Página 30
XTEND-A-POLE SY STEM Tip Extensions - Complete with Pa tente d SPRA Y CLE AN REV -GU ARD TIP EXTENSIONS, “G” THREAD 032-170 6” Long 032-171 12” Long 032-172 18” Long 032-173 24” Long SWIVEL EXTENSION, “G” THREAD 032-184 36” Long EXTENSIONS (BARE POLES) Add T ip Extension or Swivel Extension to create desired length 032-053 24” L[...]