Español dropdown-ico

Weider WESY29521 manual

1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32

Ir a la página of

manuales de instrucciones parecidos

Buen manual de instrucciones

Las leyes obligan al vendedor a entregarle al comprador, junto con el producto, el manual de instrucciones Weider WESY29521. La falta del manual o facilitar información incorrecta al consumidor constituyen una base de reclamación por no estar de acuerdo el producto con el contrato. Según la ley, está permitido adjuntar un manual de otra forma que no sea en papel, lo cual últimamente es bastante común y los fabricantes nos facilitan un manual gráfico, su versión electrónica Weider WESY29521 o vídeos de instrucciones para usuarios. La condición es que tenga una forma legible y entendible.

¿Qué es un manual de instrucciones?

El nombre proviene de la palabra latina “instructio”, es decir, ordenar. Por lo tanto, en un manual Weider WESY29521 se puede encontrar la descripción de las etapas de actuación. El propósito de un manual es enseñar, facilitar el encendido o el uso de un dispositivo o la realización de acciones concretas. Un manual de instrucciones también es una fuente de información acerca de un objeto o un servicio, es una pista.

Desafortunadamente pocos usuarios destinan su tiempo a leer manuales Weider WESY29521, sin embargo, un buen manual nos permite, no solo conocer una cantidad de funcionalidades adicionales del dispositivo comprado, sino también evitar la mayoría de fallos.

Entonces, ¿qué debe contener el manual de instrucciones perfecto?

Sobre todo, un manual de instrucciones Weider WESY29521 debe contener:
- información acerca de las especificaciones técnicas del dispositivo Weider WESY29521
- nombre de fabricante y año de fabricación del dispositivo Weider WESY29521
- condiciones de uso, configuración y mantenimiento del dispositivo Weider WESY29521
- marcas de seguridad y certificados que confirmen su concordancia con determinadas normativas

¿Por qué no leemos los manuales de instrucciones?

Normalmente es por la falta de tiempo y seguridad acerca de las funcionalidades determinadas de los dispositivos comprados. Desafortunadamente la conexión y el encendido de Weider WESY29521 no es suficiente. El manual de instrucciones siempre contiene una serie de indicaciones acerca de determinadas funcionalidades, normas de seguridad, consejos de mantenimiento (incluso qué productos usar), fallos eventuales de Weider WESY29521 y maneras de solucionar los problemas que puedan ocurrir durante su uso. Al final, en un manual se pueden encontrar los detalles de servicio técnico Weider en caso de que las soluciones propuestas no hayan funcionado. Actualmente gozan de éxito manuales de instrucciones en forma de animaciones interesantes o vídeo manuales que llegan al usuario mucho mejor que en forma de un folleto. Este tipo de manual ayuda a que el usuario vea el vídeo entero sin saltarse las especificaciones y las descripciones técnicas complicadas de Weider WESY29521, como se suele hacer teniendo una versión en papel.

¿Por qué vale la pena leer los manuales de instrucciones?

Sobre todo es en ellos donde encontraremos las respuestas acerca de la construcción, las posibilidades del dispositivo Weider WESY29521, el uso de determinados accesorios y una serie de informaciones que permiten aprovechar completamente sus funciones y comodidades.

Tras una compra exitosa de un equipo o un dispositivo, vale la pena dedicar un momento para familiarizarse con cada parte del manual Weider WESY29521. Actualmente se preparan y traducen con dedicación, para que no solo sean comprensibles para los usuarios, sino que también cumplan su función básica de información y ayuda.

Índice de manuales de instrucciones

  • Página 1

    USER'S MANUAL CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Model No. WESY29521 Serial No. Write the serial number in the space above for reference. Serial Number Decal (under seat) Visit our website at www .weiderfitness.com new products, prizes, fitness tips[...]

  • Página 2

    2 IMPORT ANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 ASSEMBL Y . . . . . . . . . . . . . [...]

  • Página 3

    3 1. Read all instructions in this manual and in the accompanying literature before using the weight system. Use the weight system only as described in this manual. 2. It is the responsibility of the owner to ensure that all users of the weight system are ade- quately informed of all precautions. 3. The weight system is intended for home use only .[...]

  • Página 4

    4 BEFORE YOU BEGIN ASSEMBLED DIMENSIONS: Height: 77 in. Width: 81 in. Length: 59 in. Foot Plate Low Pulley Station Ab Pulley Station High Pulley Station Lat Bar Leg Lever Butterfly Arm Press Arm Weight Seat Seat Backrest Backrest Leg Press Plate Thank you for selecting the versatile WEIDER ® PRO 3200 weight system. The PRO 3200 weight system of fe[...]

  • Página 5

    75 5 Before beginning assembly , carefully read the following information and instructions: • Assembly requires two people. • Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until assembly is completed. • T ighten all parts as you assemble them, unless instructed to do otherwise. •[...]

  • Página 6

    6 4. Press a 50mm x 70mm Inner Cap (22) into the top of the Right Leg (73). Attach the Right Leg (73) to the Right Base (1) with the two indicated M10 x 65mm Carriage Bolts (57) and two M10 Nylon Locknuts (70). Attach the Right Upright (6) to the Right Base (1) with the two indicated M10 x 65mm Carriage Bolts (57) and two M10 Nylon Locknuts (70). D[...]

  • Página 7

    7 7. Set two Weight Bumpers (83) over the indicated holes in the Center Base (67). Insert the two Weight Guides (20) into the holes. Attach the Weight Guides to the Center Base with two M10 x 65mm Bolts (63), four M10 W ashers (75), and two M10 Nylon Locknuts (70). 75 75 75 75 73 70 6 5 60 Short Side 60 70 5 70 70 83 83 75 75 75 63 75 67 20 7 6. Pr[...]

  • Página 8

    8 10. Press a 50mm x 70mm Inner Cap (22) into the end of the Right T op Frame (8). Attach the Right T op Frame (8) to the Right Upright (6) with two M10 x 90mm Bolts (59), a Support Plate (21), and two M10 Nylon Locknuts (70). Attach the Right T op Frame (8) to the Left To p Frame (3) with two M10 x 70mm Bolts (81), two M10 W ashers (75), and two M[...]

  • Página 9

    9 13. Lubricate an M10 x 50mm Bolt (62) with grease. Attach the Pivot Bracket (48) to the Right Butterfly Arm (1 1) with the Bolt and an M10 Nylon Locknut (70). Do not overtighten the Locknut; the Pivot Bracket must be able to pivot easily . Press a 40mm x 50mm Inner Cap (23) into the indicated end of the Right Butterfly Arm (1 1). Wet the bottom e[...]

  • Página 10

    10 16. Press a 50mm x 70mm Inner Cap (22) into the top of the Leg Press Frame (30). Lubricate an M10 x 80mm Bolt (61) with grease. Attach the Leg Press Frame (30) to the Left Base (2) with the Bolt and an M10 Nylon Locknut (70). Do not overtighten the Locknut; the Leg Press Frame must be able to pivot easily . 14. Lubricate an M10 x 80mm Button Hea[...]

  • Página 11

    1 1 20. Note: The following drawings are shown from the left side of the weight system, with the Left T op Frame (3) removed for clarity . W rap the High Cable (45) around a 90mm Pulley (38). Attach the Pulley at the rear hole, inside of the bracket on the Center T op Frame (14) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70). 17. Locate[...]

  • Página 12

    12 23. Locate the Leg Press Cable (95). Attach the Cable inside the Left Leg (36) with aM10 x 70mm Bolt (81), two M10 W ashers (75), two Long Spacers (80), and an M10 Nylon Locknut (70). 24. Wrap the Leg Press Cable (95) around a 90mm Pulley (38). Attach the Pulley inside the Leg Press Frame (30) with an M10 x 70mm Bolt (81), two M10 W ashers (75),[...]

  • Página 13

    13 27. Attach the end of the Leg Press Cable (95) to the “U”-Bracket (85) with an M8 W asher (26) and an M8 Nylon Locknut (71). Note: Do not complete- ly tighten the Locknut; it should be threaded only two turns onto the end of the Cable, as shown in the inset drawing. 28. Locate the Butterfly Cable (46). Attach the Cable to the Pivot Bracket ([...]

  • Página 14

    14 31. W rap the Butterfly Cable (46) around a “V”-Pulley (39). Attach the Pulley and a Long Cable T rap (40) to the bracket on the Right Upright (6) with an M10 x 60mm Bolt (65) and an M10 Nylon Locknut (70). Be sure the Cable T rap is turned to hold the Cable in the groove of the Pulley . 32. Attach the Butterfly Cable (46) to the Pivot Brack[...]

  • Página 15

    15 35. W rap the Leg Lever Cable (96) around a 90mm Pulley (38). Attach the Pulley and a Cable T rap (91) to the Right Upright (6) with an M10 x 95mm Bolt (98), an M10 W ashers (75), and an M10 Nylon Locknut (70). Be sure the Cable T rap is turned to hold the Cable in the groove of the Pulley . 36. Wrap the Leg Lever Cable (96) around a 90mm Pulley[...]

  • Página 16

    16 39. Route the Low Cable (47) through the Left Leg (36) and the Left Upright (7). Attach a 90mm Pulley (38) inside the Upright with an M10 x 70mm Bolt (81), two M10 W ashers (75), two 13mm Spacers (34), and an M10 Nylon Locknut (70). 40. Wrap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley and a Cable T rap (91) to the lower set o[...]

  • Página 17

    17 41. W rap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley to the indicated bracket on the Left Base (2) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70). 43. W rap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley and a Cable T rap (91) to the second set of holes from the bottom of the Adjustable Double ?[...]

  • Página 18

    18 45. W rap the Low Cable (47) around a 90mm Pulley (38). Attach the Pulley and a Cable T rap (91) to the indicated bracket on the Right Base (1) with an M10 x 45mm Bolt (66) and an M10 Nylon Locknut (70). Be sure the Cable T rap is turned to hold the Cable in the groove of the Pulley . 47. W rap the Low Cable (47) around a 90mm Pulley (38). Attac[...]

  • Página 19

    19 50. Press two 20mm x 40mm Inner Caps (104) and a 25mm x 40mm Inner Cap (105) into the Adjustable Backrest Frame (101). Attach a Backrest (15) to the Adjustable Backrest Frame (101) with four M6 x 16mm Bolts (13). Insert the Adjustable Backrest Frame (101) into the Right Upright (6) and secure it with an Adjustment Knob (102). Attach the other Ba[...]

  • Página 20

    This section explains how to adjust the weight system. See the EXERCISE GUIDELINES on page 26 for impor- tant information about how to get the most benefit from your exercise program. Also, refer to the accompanying exercise guide to see the correct form for each exercise. Make sure all parts are properly tightened each time the weight system is us[...]

  • Página 21

    21 86 72 CHANGING THE WEIGHT SETTING T o change the weight setting of the weight stack, insert the Weight Pin (86) under the desired W eight (72). Be sure to insert the Weight Pin until the bent end of the Weight Pin is touching the W eights, and turn the bent end downward. The weight setting of the weight stack can be changed from 6 pounds to 106 [...]

  • Página 22

    22 TIGHTENING THE CABLES W oven cable, the type of cable used on the weight system, can stretch slightly when it is first used. If there is slack in the cables before resistance is felt, the cables should be tightened. See drawing A. Slack can be removed by moving the 90mm Pulley (38) and Cable T rap (91) to a higher set of holes in the Adjustable [...]

  • Página 23

    23 WEIGHT RESIST ANCE CHART The chart below shows the approximate weight resistance at each exercise station. “T op” refers to the 6-pound top weight. The other numbers refer to the 12.5-pound weight plates. W eight resistance shown for the butterfly arm station is for each butterfly arm. Note: The actual resistance at each station may vary due[...]

  • Página 24

    High Cable (45) CABLE DIAGRAMS The cable diagrams below show the proper routing of the High Cable (45), the Butterfly Cable (46), the Low Cable (47), the Leg Press Cable (95), and the Leg Lever Cable (96). Use the diagrams to make sure that the cables and the cable traps have been assembled correctly . If the cables have not been correctly routed, [...]

  • Página 25

    25 4 1 2 5 2 1 3 5 Leg Lever Cable (96) Leg Press Cable (95) 3 4 CABLE ID CHART — (46) 47 3/7” — (96) 95 1/2” — (95) 148 1/4” — (47) 276 3/4” — (45) 1 16 3/4”[...]

  • Página 26

    26 EXERCISE GUIDELINES THE FOUR BASIC TYPES OF WORKOUTS Muscle Building T o increase the size and strength of your muscles, push them close to their maximum capacity . Y our mus- cles will continually adapt and grow as you progres- sively increase the intensity of your exercise. Y ou can adjust the intensity level of an individual exercise in two w[...]

  • Página 27

    27 Rest for a short period of time after each set. The ideal resting periods are: • Rest for three minutes after each set for a muscle building workout. • Rest for one minute after each set for a toning work- out. • Rest for 30 seconds after each set for a weight loss workout. Plan to spend the first couple of weeks familiarizing yourself wit[...]

  • Página 28

    50mm x 70mm Inner Cap (22) 40mm x 50mm Inner Cap (23) 25mm Round Inner Cap (24) 19mm Round Inner Cap (27) 50mm Square Inner Cap (33) 38mm Square Inner Cap (41) M10 Nylon Locknut (70) M8 Nylon Locknut (71) M6 W asher (35) M8 W asher (26) M5 W asher (50) M10 W asher (75) P ART IDENTIFICA TION CHART—Model No. WESY29521 R1002B[...]

  • Página 29

    M10 x 60mm Bolt (65) M10 x 90mm Bolt (59) M10 x 65mm Bolt (63) M10 x 85mm Bolt (60) M10 x 80mm Bolt (61) M10 x 95mm Bolt (98) M10 x 65mm Carriage Bolt (57) M10 x 50mm Bolt (62) M10 x 45mm Bolt (66) M10 x 70mm Bolt (81) M10 x 100mm Bolt (84) M10 x 135mm Bolt (58) M10 x 80mm Button Head Bolt (97) M8 x 16mm Bolt (64) M8 x 45mm Bolt (69) M8 x 16mm Shou[...]

  • Página 30

    Note: “#” indicates a non-illustrated part. Specifications are subject to change without notice. P ART LIST—Model No. WESY29521 R1002B 1 1 Right Base 2 1 Left Base 3 1 Left T op Frame 4 1 Leg Lever 5 1 Right Seat Frame 6 1 Right Upright 7 1 Left Upright 8 1 Right T op Frame 9 1 Butterfly Frame 10 1 Left Butterfly Arm 1 1 1 Right Butterfly Arm[...]

  • Página 31

    2 7 66 70 81 67 5 6 15 16 38 39 39 40 41 40 98 90 70 70 70 70 65 65 70 70 70 75 75 35 13 1 28 38 57 70 66 70 57 70 70 63 70 81 38 47 57 70 57 13 70 38 70 66 21 59 8 22 53 54 54 9 97 97 61 70 68 22 54 55 54 55 70 70 81 70 63 66 33 82 32 70 81 75 80 70 70 70 71 70 70 58 70 75 75 75 75 75 83 75 70 75 75 71 71 19 1 1 12 23 46 48 62 78 71 70 64 64 76 10[...]

  • Página 32

    ORDERING REPLACEMENT P ARTS T o order replacement parts, simply call our Customer Service Department toll-free at 1-800-999-3756, Monday through Friday , 6 a.m. until 6 p.m. Mountain T ime (excluding holidays). T o help us assist you, please be pre- pared to give the following information: 1. The MODEL NUMBER of the product (WESY29521) 2. The NAME [...]