Weslo WETL0514.0 manual

USER’S MANUAL Serial Number Decal Model No. WETL0514.0 Serial No. QUESTIONS? As a manufacturer, we are com- mitted to providing complete customer satisfaction. If you have questions, or if there are missing or damaged parts, please call: Or write: ICON Health & Fitness, Ltd. Unit 4 Revie Road Industrial Estate Revie Road, Beeston Leeds, LS11 [...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . .[...]

3 1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with at least 2.5 m (8 ft.) of clearance behind it and 0.5 m (2 ft.) on each side. Do not place the treadmill[...]

4 22. DANGER: Always unplug the power cord immediately after use, before cleaning the treadmill, and before performing the main- tenance and adjustment procedures de- scribed in this manual. Never remove the motor hood unless instructed to do so by an authorised service representative. Servicing other than the procedures in this manual should be pe[...]

5 Thank you for selecting the WESLO CADENCE ® 45 treadmill. The CADENCE 45 treadmill combines ad- vanced technology with innovative design to let you enjoy an exc ellen t form o f cardiovascular exercise in t he convenience and privacy of y our h ome. And when you’re not exercising, the unique CADEN CE 45 trea d- mill can be folded up, requiring[...]

ASSEMBL Y A ssembly requires two persons. Place a mat under the treadmill to protect the floor during assembly. S et the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until as- sembly is completed. Note: The underside of the treadmill walking belt is coa ted with high -per form ance lubr ican [...]

4. With the help of a second person, raise the Left and Right Uprights (32, 37) to the vertical position. Feed the Wire Harness (53) into the hole in the bottom of one of the Handrails (4) and out of the large hole in the side. Note: It may be helpful to use needlenose pliers to pull the Wire Harness out of the hole. Set the Handrail (4) onto the R[...]

6. Place the Console Base (45) on the Handrails (4) (only one Handrail is shown). Insert the Wire Harness (53) through the indicated plastic tie on the Console Base (45). Next, insert the Wire Harness through the opening in the Console Base. 6 8 45 Tie 4 53 8 9 5 3 5 4 5. Attach the end of the ground wire on the Wire Harness (53) to the small hole [...]

9 8 8. Set the Console (2) in the Console Base (45). Make sure that no wires are pinched. Attach the Console (2) to the Console Base (45) with six 3 /4” Screws (77). S tart all six Screws before tighten- ing them; do not overtighten the Screws. 9. Insert the excess Wire Harness (53) into the large hole in the side of the right Handrail (4) Secure[...]

10 14. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure place. The large hex key is used to adjust the walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill. 12. Lower the Uprights (32, 37) until the Handra[...]

1 1 THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM ,a high-performance lubricant. IMPOR- TANT: Never apply silicone spray or other substances to the walking belt or the walking platform. Such substances will deteriorate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER COR[...]

12 STEP-BY-STEP CONSOLE OPERATION Before operating the console, make sure that the power cord is properly plugged in (see page 11). Locate the on/off switch on the side of the treadmill near the power cord. Move the on/off switch to the “on” position. Next, stand on the foot rails of the treadmill. Find the clip attached to the key (see the dra[...]

To stop the walking belt, press the Stop button. The elapsed time will begin to flash in the T ime/Distance display. N ote: During the first few minutes that the tread- mill is used, inspect the alignment of the walking belt, and align it if necessary (see page 17). Follow your progress with the displays. Time/Distance display —This display shows[...]

14 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Unplug the power cord. CAUTION: You must be able to safely lift 20 kg (45 lbs.) to raise, lower, or move the t readmill. 1. Hold the treadmill with your hands in the locations shown at the right. CAUTION: To decrease the possibility of in- jury, bend your legs and keep you[...]

15 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left thumb, press the storage latch and hold it. Pivot the treadmill until the frame and foot rail are past the storage latch. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. To decrease the poss[...]

16 MAINTENANCE AND TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly ear[...]

17 PROBLEM: The walking belt slows when walked on S OLUTION: a . If an extension cord is needed, use only a 3-conductor, 1mm 2 ( 14-gauge) cord that is no longer than 1.5 m (5 ft.). b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Usin[...]

18 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

19 EXERCISE FREQUENCY T o maintain or improve your condition, complete three workouts each week, with at least one day of rest be- tween workouts. After a few months, you may com- plete up to five workouts each week if desired. The key t o success is to make exercise a regular and enjoyable part of your everyday life. S UGGESTED STRETCHES The corre[...]

20 NOTES[...]

P ART LIST—Model No. WETL0514.0 R0305A K ey No. Qty. Description 1 1 Hood 2 1 Console 3 1 Motor Belt 4 2 Handrail 5 1 Motor Isolator Plate 6 4 1” Tek Screw 7 1 Motor 8 1 Reed Switch 9 9 Electronics Screw 10 1 Reed Switch Clip 11 1 Power Switch 12 2 Hood Anchor 13 2 Front Roller Bolt 14 1 Magnet 15 6 Platform Screw 16 1 Motor Tension Nut 17 1 Fr[...]

1 77 77 77 64 40 58 62 52 15 74 15 56 12 16 18 17 15 14 13 56 8 95 75 15 69 72 70 71 83 15 15 60 21 35 9 73 71 71 81 63 59 84 88 85 10 20 56 81 13 85 12 56 62 52 46 25 66 46 67 47 82 71 70 56 95 30 96 56 56 56 56 56 56 57 43 56 91 98 5 65 67 47 82 3 61 7 24 80 51 97* 94 29 19 9 50 23 22 27 9 9 9 9 26 1 1 EXPLODED DRA WING—Model No. WETL0514.0 R 0[...]

36 36 87 9 78 79 76 42 31 33 37 58 40 55 77 4 34 38 32 89 53 77 4 31 6 31 61 33 34 28 68 54 53 31 6 61 77 4 5 48 77 77 77 44 68 41 44 68 44 68 44 68 2 28 68 49 49 28 68 41 49 6 6 93 92 86 90 90 39 87 EXPLODED DRA WING—Model No. WETL0514.0 R0305A 23[...]

Part No. 210242 R0305A Printed in USA © 2005 ICON IP, Inc. ORDERING REPLACEMENT P ARTS I f you encounter any problems with this product, or if you need to order replacement parts, contact the ICON Health & Fitness, Ltd. office, or write: ICON Health & Fitness, Ltd. C ustomer Service Department Unit 4, Revie Road Industrial Estate Beeston L[...]