Xantrex Technology 250 manual

Owner’s Guide tel: 1.800.670.0707 fax: 1.800.994.7828 email: support.jazz@xantrex.com web: www .xantrex.com 445-0123-01-01 Printed in China[...]

About Xantrex Xantrex T echnology Inc. is a world-leading supplier of advanced power electronics with a product line that ranges from 50-watt mobile units to 1 MW utility-scale systems for wind, solar, batteries, fuel cells, microturbines and backup power applications in both grid- connected and stand-alone systems. Xantrex products include inverte[...]

Contents 1 Introduction ............................................................................ 1 2 Safety First  .......................................................................... 2 3 Quick Start Guide .................................................................... 3 3.1 Overview ...............................................[...]

6 Powering 12-Volt DC Products .............................................. 1 3 6 . 1 Connecting 12- V olt DC Products ....................................... 1 3 6 . 2 Built-in Fluorescent Light .................................................. 1 3 6 . 3 DC Product Operating Times ............................................ 1 4 7 Vehicle or Bo[...]

1 1 Introduction Thank you for purchasing Jazz Portable Power 250, your source for Power That Really Moves. Easy to use and designed for years of reliable service, Portable Power 250 can run a wide variety of AC electrical products wherever you need household power for work or play . In addition, it s the product to have close at hand shou[...]

2 2 Safety First  Misuse of Portable Power 250 may result in danger to the user . W e urge you to pay special attention to all CAUTION and WARNING statements. CAUTION statements identify conditions or practices that may result in damage to Portable Power 250 or to other equipment. WARNING statements identify conditions that may result in persona[...]

3 3 Quick Start Guide 3.1 Overview The following instructions provide a brief overview of Portable Power 250 s key features. For complete information, be sure to read this manual fully . The diagram below presents product features and accessories. Figure 1 - Portable Power 250s Key Features[...]

4 3 . 2 An Explanation of Power Ratings and Battery Life AC powered products are rated by how much electrical power (in watts) they consume. Portable Power 250 s internal A C inverter is capable of generating a maximum of 250 watts to power AC products plugged into its AC receptacle. As an example, a lamp with a 40 watt bulb can be operated from[...]

5 3 . 4 Operating 12-Volt DC Products 1 . Ensure the internal battery is fully charged. (See Section 8 for details.) 2 . Plug the accessory into the DC Power Socket, and switch the accessory on (if required). Portable Power 250 will operate any 12-volt DC auto or marine accessory that draws 12 amps or less. 3 . Because the DC Power Socket is intern[...]

6 4 Indicators, Controls and Connectors Refer to Figure 1 in Section 3.1 and in Figure 2 below for the location of items described in this section. 4 . 1 Battery Level Indicators The Battery Level Indicators show the state of charge of the internal battery . Its function is similar to the fuel gauge in a car . When pressing and holding the Battery [...]

7 char ging the battery with the AC Char ger , this light will glow amber , then change to green when the battery is fully char ged. Once fully charged, the charging circuitry automatically switches into its charge maintenance mode. 4 . 3 Vehicle-Jump Start Indicators There are two indicators that pertain to the vehicle jump-start feature; one is l[...]

8 4 . 7 AC Outlet Switch The AC outlet has an ON/OFF switch (located above the AC outlet) which illuminates when the switch is turned on indicating power is available at the AC outlet. 4 . 8 Audio Alarm Three types of conditions will set off the audio alarm. A low battery voltage condition, an over-temperature condition, and a reverse polarity conn[...]

9 5 Powering AC Electrical Products 5 . 1 General Information Portable Power 250 is capable of powering most 110-volt AC products and equipment that use 230 watts or less. Its A C output waveform, called a quasi-sine wave or modified sine wave, is designed to function similarly to the sine wave shape of utility power . CAUTION: Do not u[...]

10 3 . As the AC product is operated, you can check the level of the battery as detailed in Section 4.1. This will give you an idea of how much time remains until the battery needs recharging. 4 . When the battery becomes nearly discharged, or empty, a low voltage warning will sound. This will give you time to shut down a computer , for examp[...]

11 5 . 4 Interference with Electronic Equipment 5.4.1 Buzzing Sound in Audio Systems Some inexpensive stereo systems and boom-boxes will emit a buzzing sound from their loudspeakers when operating from the AC outlet of Portable Power 250. This is because the power supply in the equipment does not adequately filter the modified sine wave produ[...]

12 5 . 5 AC Product Operating Times Below are examples of AC products that may be operated by Portable Power 250 with estimated operating times. (1 ) Represents actual power consumption as measured on sample products. (2 ) Operating times assume a fully charged battery and may vary based on model/brand used. Portable Power 250 will not operate AC p[...]

13 6 Powering 12-Volt DC Products 6 . 1 Connecting 12-Volt DC Products Portable Power 250 can operate any product that is intended to run from a vehicle s lighter socket. Simply insert the DC product s plug into the DC Power Socket located on the right side of the unit. Portable Power 250 s DC Power Socket will operate any 12-volt DC auto,[...]

14 Should tube replacement be necessary , first turn of f the light, then remove the clear cover by grasping it on each side at the top and pulling the top of the cover away from the unit. Gently grasp the tube and rotate ¼ turn to remove. Insert the replacement tube and rotate ¼ turn to lock in place. Attach clear cover . 6.3 DC Product Operatin[...]

15 7 Vehicle or Boat Engine Starting Assistance 7.1 Jump-Starting Direct to the Battery W ith the Jump-Start Cables supplied, Portable Power 250 may be used to jump-start a vehicle or boat that has a 12-volt starting battery . Portable Power 250 has a special jump-start safety feature that eliminates the sparking that sometimes occurs when jump-sta[...]

16 9 . After the clips are properly connected and the green Battery Clips Correct light is illuminated, make sure that Portable Power 250 and the Jump-Start Cables are clear of belts and fans before attempting to start the engine. WARNING: Do not remove the Jump-Start Cables from the Jumper Cable Port when the positive and negative clips are connec[...]

17 8 Recharging Jazz Portable Power 250 8 . 1 General Information on Batteries and Charging 8.1.1 Charging Options These charging methods are possible with Portable Power 250:  Charging with the fully automatic plug-in-and- for get AC Charger .  Charging from your vehicle with the DC Charging Cable as you drive .  Charging from a gen[...]

18 3 . Insert the AC Charger cable end into the Char ger Input Socket located on the unit s right side below the AC outlet. 4 . As Portable Power 250 charges, the Recharge Indicator will glow amber . A typical recharge may take up to 35 hours. 5 . When fully charged, the Recharge Indicator changes to green and Portable Power 250 is ready to use.[...]

19 8 . 4 Recharging with a Generators 12-Volt DC Power Outlet Recharging Portable Power 250 from a generator using the AC Charger is possible, but would require extended generator running time. Since many generators have an auxiliary regulated 12-volt DC output designed for charging 12-volt batteries, using this power source will result in much [...]

20 9 Connecting to an External Battery 9 . 1 Extended Operating Time Much longer battery operating time is possible when connecting Portable Power 250 to a larger external battery . For example, an external 60 amp-hour battery will give approximately 3 to 4 times the operating time of Portable Power 250 s internal battery . WARNING: Use a sealed[...]

21 10 Battery Replacement 10.1 General Information About Battery Life The battery used in Portable Power 250 is a high quality , state- of-the-art design that will serve as a reliable power source for years when properly maintained. T o maximize battery life it is important to recharge Portable Power 250 s battery after each use. Rechar ge fully[...]

22 7. Be careful not to drop a metal object on the battery or allow a metal tool to simultaneously touch the positive and negative cable ends or battery terminals. It might spark or short-circuit the battery or other electrical parts and cause an explosion. 8 . Remove personal metal items such as rings, bracelets, necklaces, and watches when workin[...]

23 5 . Replace battery cover and 4 fasteners. 6 . Dispose of the old battery in an environmentally responsible manner . 10.3 O btaining a Replacement Battery Replacement batteries are available in many areas from stores that specialize in higher amperage, deep cycle batteries. The following batteries are approved for use with Portable Power 250. If[...]

24 11 Troubleshooting PROBLEM: AC product will not operate, no audio alarm. PROBLEM: AC product will not operate, audio alarm is sounding PROBLEM: Run time is less than expected . Possible Cause Product rated more than 230 watts, safety overload circuit has tripped. Appliance is rated less than 230 watts, high starting surge has tripped overload. S[...]

25 PROBLEM: Measured inverter output voltage is too low. PROBLEM: Charging light is OFF when AC Charger is connected. Possible Cause Use of standard average reading AC voltmeter to read output voltage. Battery is almost empty. Suggested Remedy Modified-sine wave output of inverter requires true RMS reading meter , such as Fl[...]

26 12 Specifications* 12-Volt DC Section Internal battery type sealed, AGM lead acid Internal battery voltage (nominal) 1 2 V Internal battery capacity (minimum) 17 Ah DC Power Socket (maximum continuous load) 1 2 A DC Power Socket circuit breaker (with auto reset) 1 2 A Built-in fluorescent lamp (replaceable) two, 4 W bulbs Jump-start cables 39[...]

27 1 3 Limited Warranty (USA and Canada only) and Out-of-Warranty Service Information What Does This W arranty Cover? Xantrex manufactures its products from parts and components that are new or equivalent to new , in accordance with industry standard practices. This warranty covers any defects in workmanship or materials. How Long Does The Coverage[...]

28 Y ou must obtain a Return Material Authorization (RMA) number from Xantrex before returning a product directly to Xantrex. Do not return a product to Xantrex without first obtaining an RMA number . When you contact Xantrex to obtain service, be prepared to supply the serial number of your product and its date of purchase as well as information a[...]

29 1 4 Other Products from Xantrex Jazz Portable Power 250 is part of the Jazz family of power products. Other models in this series include the Jazz 150, Jazz 300, and Jazz 500 power inverters, which convert 12-volt battery power to household AC power and are designed for use in a vehicle. These inverters are small, light weight, and highly portab[...]

30 NOTES[...]

31 NOTES[...]

Owner’s Guide tel: 1.800.670.0707 fax: 1.800.994.7828 email: support.jazz@xantrex.com web: www .xantrex.com 445-0123-01-01 Pri nted in China[...]