Zanussi W 1042 W manual

W ASHER-DR YER W 1042 W W 1242 W WDA 1055 W ON-OFF HALF LOAD TURBOBRY 1 000 Z ANUSSI Q UALITY INSTRUCTION BOOKLET 132992230 GB 132992230.qxd 4/30/03 11:42 AM Pagina 1 (Nero/Process Black pellicola)[...]

2 Installation ● This appliance is heavy . Care should be taken when moving it. ● It is dangerous to alter the specifications or attempt to modify this product in any way . ● All packing and transit bolts must be removed before use. Serious damage can occur to the product and to property if this is not adhered to. See relevant section in inst[...]

3 Contents F or the User Y our New W asher-Dryer 4 Important Safety Information 2 Description of the Appliance 5 Detergent dispenser drawer 5 The Control Panel 6 Operating sequence 7-1 1 W ashing 4.5 kg of white cotton at 95°C 7 Load the laundry 7 Measure out the detergent 7 Measure out the fabric softener 7 Select the spin speed or option or 7 Se[...]

4 Y our New W asher -Dryer Y our new washer -dryer meets all moder n requir ements for effective treatment of laundry with low water , energy and deter gent consumption. It is gentle with your laundry, simple to use and easy to care for . ● The special wool programme with its new delicate wash system treats your woollens with extreme care. ● Th[...]

5 Description of the Appliance 1 Detergent dispenser drawer 2 Programme guide 3 Drying time selector dial 4 Drying indicator light 5 “Mains-on” light 6 ON/OFF button 7 Half load button 8 Spin Speed selector dial 9 Programme selector dial 10 Door opening handle 1 1 Filter 12 Adjustable feet Deter gent dispenser dr a w er Prewash Main wash Fabric[...]

6 The Contr ol Panel 7 Spin speed selector dial This dial allows you to select the desired spin speed or the following options: ● = no spin. All the spinning phases are excluded. T o be used for items that tend to wrinkle. If position is selected for cotton items (programmes 95°, 60° and 40°), the machine will perform an extra rinse (4 instead[...]

7 Operating Sequence Before the first wash, we recommend that you run a cotton cycle at 60°C, without any laundry in the machine, to remove any manufacturing residue from the drum and tub. Pour 1/2 a measure of detergent into the main wash compartment of the dispenser drawer and start the machine. W ASHING 4.5 KG OF WHITE COTTON A T 95°C Suppose [...]

8 6. Star t the machine Before starting up the machine check that: ● the appliance is plugged in ● the water supply taps are turned on ● the drain hose is correctly and securely positioned ● the door and the detergent dispenser drawer are closed. Depress the ON/OFF button: the mains-on light will illuminate and the machine starts operating.[...]

9 4. Select the spin speed or option or T urn the dial to the required position. 5. Select the pr ogr amme T urn the programme selector dial clockwise to the programme K . 6. Star t the machine Before starting up the machine check that: ● the appliance is plugged in ● the water supply taps are turned on ● the drain hose is correctly and secur[...]

10 DR YING 2.25 KG OF COTT ON Y ou have for example just machine-washed and spun at 1000 rpm 4.5 kg of laundry . They are cotton fabrics of medium weight which you want to iron as soon as they are dry . Switch off the machine. Then remove the laundry from the appliance and divide the items to obtain two loads of approx. 2.25 kg each. 1. Load the la[...]

11 AUTODR YING 1 KG OF MIXED F ABRICS Y ou intend to wash and dry automatically 1 kg of mixed fabrics which do not need ironing. Proceed as follows: 1. Load the laundry . 2. Add the washing powder and fabric softener . 3. Select the pr ogr amme T urn the programme selector dial clockwise to programme K . 4. Select the r equir ed time Following indi[...]

12 W ashing and Drying Hints Do NOT overload the machine. W eigh the laundry the first few times you use the appliance. The average weights of the most common items are listed below as a guide: 1000g = 1 kg Sheet 700-1000 g Pillow case 100-200 g T ablecloth 400-500 g Serviette 50-100 g T ea towel 70-120 g Linen hand towel 100-150 g T owelling hand [...]

13 And in which f orm? Not only are there different types of deter gent, but they are also available in different forms. Whether you chose a powder or liquid in traditional or compact form is your own personal choice. TRADITIONAL POWDERS Pour the powder directly into the dispenser drawer . Do not sprinkle powder onto clothes in the machine drum. TR[...]

14 W ash Car e Symbols W ash care labels inside garments recommend how to launder your clothes with the best results. The care labelling code is in line with care labelling used in the rest of Europe. The symbols used make it easy to select the correct programme on your washing machine. W ASHING SYMBOL BLEACHING IRONING DR Y CLEANING TUMBLE DR YING[...]

15 W ashing Programmes Degree of soil and type of laundry Description W ash programme/ W ashing symbol Programme dial position Possible options Max. load NON- F AST COLOUREDS F AST COLOUREDS WHITES WHITES + PREW ASH For heavy soiled cotton items. Fast coloured cotton or linen fabrics, shirts, underwear , towels. Non fast coloured cotton or linen fa[...]

16 Important! ● Some programmes when selected may start with a short drain. This is quite normal and not a fault with the appliance. When a programme is selected, the selector dial will advance to the water filling position. ● W e recommend you not to switch the appliance of f and on during its operation. This would modify the memorised program[...]

17 Drying Pr ogrammes (*) The STORE DR Y drying programme for cotton is the reference programme for the Ener gy Label data, in compliance with EC directive 92/75. Degree of drying Store dry (*) Suitable for items to put away without ironing T ype of fabric Cotton and linen (towels, T -shirts, bathrobes) Programme J Max. load 2.25 kg Spin speed 1000[...]

18 Maintenance and Cleaning Before any maintenance or cleaning is carried out you must DISCONNECT the appliance from the electricity supply . Descaling The water we use normally contains lime. It is a good idea to periodically use a water softening powder in the machine. Do this separately from any laundry washing, and according to the softening po[...]

19 If the filter is blocked and the machine is unable to drain you will need to drain the water manually from the machine at this stage. T o do this, unhook the drain hose from the standpipe or sink and hold the end of the hose over a bowl on the floor . The water should drain by gravity into the bowl. When the bowl is full, hook the hose back up a[...]

20 Something Not W orking Certain problems are due to lack of simple maintenance or oversights, which can be solved easily without calling out an engineer . Before contacting your local Service Force Centre, please carry out the checks listed below . IMPOR T ANT : if you call out an engineer to a fault listed below , or to r epair a fault caused by[...]

21 Symptom The door will not open Possible causes ● The programme is still running. ● The door lock has not yet released. ● W ater in the tub: the door cannot be opened if water is present in the tub. Spinning starts late or the machine does not spin ● The electronic unbalance detection device has cut in because the laundry is not evenly di[...]

22 Guarantee Conditions Standar d guar antee conditions W e, Zanussi Electrolux, undertake that if, within 12 months of the date of the purchase, this ZANUSSI ELECTROLUX appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF ANY CHARGE for [...]

23 Installation Instructions T echnical Specifications It is dangerous to alter the specifications or attempt to modify this product in any way . Care must be taken to ensure that the appliance does not stand on the electrical supply cable. Any electrical work required to install this appliance should be carried out by a qualified electrician or co[...]

24 Unpacking All transit bolts and packing must be removed before using the appliance. Y ou are advised to keep all the packaging for re-use in case the machine is to be transported again. Using a spanner unscrew and remove the two rear bottom screws. Slide out the two plastic pins. Lay the machine gently on its back, making sure that the hoses are[...]

25 W a ter inlet The inlets on the back of the appliance are colour coded, blue for cold and red for hot. Connect the hoses to a tap with a 3/4” thread. Do not use previously used hoses. If only a cold water supply is available, connect the two hoses to a cold water outlet by means of a «Y» connection piece. Installation should comply with loca[...]

26 If you intend the drain hose to empty into a sink, make sure that the sink is empty and the plug hole is not blocked. Use the plastic “U-Piece” supplied. Important Before connecting up the machine to new pipework or to pipework that has not been used for some time, run off a reasonable amount of water to flush out any debris that may have co[...]

27 Electrical connection Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EAR THED. The manufacturer declines any liability should this safety measure not be observed. Before switching on, make sure the electricity supply voltage is the same[...]

© Electrolux plc 2003 From the Electr olux Group. The world’ s No . 1 choice . The Electrolux Group is the world's largest producer of powered appliances for kitchen, cleaning and outdoor use. More than 55 million Electrolux Group products (such as refrigerators, cookers, washing machines, vacuum cleaners, chain saws and lawn mowers) are so[...]