Zanussi ZI 7243 manual

REFRIGER A T OR - FREEZER ZI 7243 INS TRUCTION BOOKLE T 2222 216-83[...]

2 IMPORT ANT SAFETY INFORMA TION It is most important that this instruction book should be retained with the appliance for future reference. Should the appliance be sold or transferred to another owner , or should you move house and leave the appliance, always ensure that the book is left with the appliance in order that the new owner can get to kn[...]

3 CONTENTS 2222 216-83 Instructions for the user Important Safety Information 2 Description of the appliance 4 Operation 5 Before using 5 Setting the temperature 5 The freezer compartment 5 Freezing fresh food 5 Thawing 5 Making ice cubes 5 Normal operating sounds 5 Fresh food refrigeration 6 Movable shelves 6 Positioning the door shelves 6 Health [...]

4 DESCRIPTION OF THE APPLIANCE A - Dairy compartment B - Shelves C - Bottle storage shelf D - Salad drawers E - Glass shelf F - Storage shelves G - Cool check temperature guide H - Thermostat I - Freezer compartment I G H E F D C B A[...]

5 OPERA TION Before using Remove all securing tapes. W ash inside the appliance with lukewarm water and bicarbonate of soda (5 ml to 0.5 litre of water). Do not use soap or detergent as the smell may linger . Dry thoroughly . Setting the temperature The temperature inside the refrigerator and the freezer is regulated by a single thermostat with 6 t[...]

6 Movable shelves The walls of the refrigerator are equipped with a series of runners so that the shelves can be positioned as desired . For better use of space, the front half-shelves can lie over the rear ones. Positioning the door shelves T o permit storage of food packages of various sizes, the door shelves can be adjusted in height. T o do thi[...]

7 Because of consumer demand, preservatives have been removed from many pre-prepared foods. This together with the changes in shopping habits to a once-a-week shop, mean that safe handling and storage of food is even more important than ever . The following tips should help you to ensure that the food in your home is in as perfect condition as poss[...]

8 Cool Check Guide The guide consists of a temperature sensitive strip sealed in a shelf trim. When the fridge is operating at the safe temperature to store food the guide will appear black. If the temperature rises above this level the guide will show the words T OO W ARM. Positioning of the Cool Check The shelf with the cool check temperature gui[...]

9 Defrosting Refrigerator The refrigerator automatically defrosts every time the compressor stops. The water is discharged, via the pipe, into a tray located at the back of the appliance above the compressor , where it evaporates. Important T o avoid defrost water overflowing into the fridge, periodically clean the water discharge hole in the centr[...]

10 - Clean and dry thoroughly . - Replace the scraper in one of the drawers . - Reconnect the appliance to the mains or reset the thermostat to a functioning position. - After letting the appliance run for a least half an hour , replace the previously removed food into the compartment. Important When defrosting the freezer , the fridge is also cont[...]

SOMETHING NOT WORKING Symptom No power to the appliance The light does not come on The temperature in the fridge or freezer section is too high The compressor runs continously Excessive frost and ice has built up Noise W ater under the salad bin Solution Check there is power at the socket. Check there is not a power cut by checking the household li[...]

12 SER VICE AND SP ARE P ARTS CUST OMER CARE DEP ARTMENT In the event of your appliance requiring service, or if you wish to purchase spare parts, please contact your local Zanussi Service Force Centre by telephoning:- 0870 5 929929 Y our telephone call will be automatically routed to the Service Force Centre covering your post code area. For furth[...]

13 Standard guarantee conditions We, Zanussi, undertake that if within 24 months of the date of the purchase this Zanussi appliance or any part thereof is proved to be defective by reason only of faulty workmanship or materials, we will, at our option repair or replace the same FREE OF CHARGE for labour , materials or carriage on condition that: Th[...]

14 TECHNICAL SPECIFICA TIONS POWER SUPPL Y VOL T AGE AND FREQUENCY 220-240 V / 50 Hz T OT AL POWER ABSORBED 120 W A VERAGE DAIL Y UNITS ELECTRICITY * 0.88 kWh GROSS CAP ACITY Fridge 220 l Freezer 17 l NET CAP ACITY Fridge 195 l Freezer 17 l ST AR RA TING * This figure is based on standard test results in accordance with European Standard EN 153. Ac[...]

15 INST ALLA TION Positioning This appliance is designed to operate in ambient temperatures between 10¡C (50¡F) and 32¡C (90¡F). It should be located in a dry atmosphere, out of direct sunlight and away from extreme temperature e.g. not next to a cooker or other sources of direct heat, or in a very cold room e.g. an outhouse, where the temperat[...]

16 Electrical connections Any electrical work required to install this appliance should be carried out by a qualified electrician or competent person. W ARNING: THIS APPLIANCE MUST BE EARTHED. The manufacturer declines any liability should this safety measure not be observed. If the plug that is fitted to your appliance is not suitable for your soc[...]

17 Instructions for totally built-in appliances Recess dimensions Height 1225 mm Depth 550 mm Width 560 mm The applianceÕ s door has been locked in position for transport by means of pins on both sides. According to the door opening direction, remove relevant pins at the top and at the bottom. T o ensure adequate ventilation, allow the clearances [...]

18 Position the runners (A) at the top and bottom of the inside of the kitchen unit as shown in the diagram and mark the position of the external holes. After preparing the holes, screw the runners to the kitchen unit door using 3.5x16 mm screws. Open both the appliance door and that of the kitchen unit to approx. 90¡. Place the little plates over[...]

Inner door reversal Using a screwdriver release bracket (1) by pressing on the internal spring and withdraw it from its seat together with the door; remove plug (2) and fit it in the hole left open on the opposite side; turn the door through 180¡, remove the bracket (1) and refit it on the opposite side. Refit the door and insert the top pin and b[...]