Zanussi ZSF2450 manual

GB User manual 2 Dishwasher ZSF2450[...]

Contents Safety information _ _ _ _ _ _ _ _ _ _ _ _ _ _ 2 Control panel _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ _ 3 Washing programmes _ _ _ _ _ _ _ _ _ _ _ _ _ 4 Use of the appliance _ _ _ _ _ _ _ _ _ _ _ _ _ 6 Setting the water softener _ _ _ _ _ _ _ _ _ _ 6 Use of dishwasher salt _ _ _ _ _ _ _ _ _ _ _ _ _ 7 Use of rins e aid _ _ _ _ _ _ _ _ _ _ _ _ _ _ [...]

Installation • Make sure that the appliance is not damaged because of transport. Do not connect a dam- aged appliance. If ne cessar y, contact the sup- plier. • Remove all packaging before first use. • A qualified and competent p erson must do the electrical installation. • A qualified and competent p erson must do the plumbing installation[...]

Indicator lights The indicator light comes on when the washing phase or the rinsing phase op erates. The indicator light comes on when the drying phase operates. The indicator light comes on when the washing programme is completed. 1) The indicator light comes on when it is necessary to fill the salt container. Refer to the chapter 'Use of dis[...]

Washing programmes Programme Degree of soil Type of loa d Programme description Heavy soil Crockery, cutlery, pots and pans Prewash Main wash up to 70°C 2 intermediate rinses Final rinse Drying 1) Mixed nor- mal and light soi l Crockery, cutlery, pots and pans Prewash Main wash up to 45°C o r 70°C 1 or 2 intermediate rinses Final rinse Drying 2)[...]

Programme Programm e duration (in minutes) 1) Energy consumption (in kWh) Water consumption (in litres) - 0,4 6,0 1) The digital display show s the programme durat ion. The pressure and temperature of the water, the variations of power supp ly and the quantity of dishes can change these values. Use of the appliance Refer to the following in structi[...]

3. P ress and hold function buttons B and C until the indicator lights of function buttons A, B and C start to flash. 4. Release function buttons B and C. 5. Press function button A. – The indicator lights for function buttons B and C go off. – The indicator light for function button A continues to flash. – The digital display shows the curre[...]

1 2 max 3 4 Caution! Do not fill the rinse aid dispenser with other products (e.g. dishwasher cleaning agent, liquid detergent). Th ere is a risk of damage to the appliance. Adjusting the dosage of rinse aid The rinse aid dial is set at the factory at posi- tion 1. To increase or de- crease the dosage re- fer to 'What to do if...' Loading[...]

Primary basket 1 Arrange items on and below the cup racks. For longer items fold the cup racks up. Arrange the deep dishes and large lids around the edge of the basket. Arrange the items to let water touch all surfaces. Cutlery basket Warning! Do not put long-bladed knives in a vertical position to prevent injury. Arrange long and/or sharp items of[...]

A 5 6 Use of detergent tablets Put the detergent tablet in the detergent dis- penser (A). Detergent tablets contain: •d e t e r g e n t •r i n s e a i d • other cleaning agents. Do these steps to use detergent tablets: 1. Make sure that th e detergent tablets are ap- plicable for your water hardness. Refer to the instructions from the manufac[...]

2. Set a new washi ng programme . Fill the detergent dispenser with detergent be- fore you set a new washing programme. Interrupting a washing programme Open the door . • The programme stops. Close the door. • The programme continues from the point of interruption. Setting and starting a washing programme with delay start 1. Press the on/off bu[...]

1 B A 2 Remove the filters A and B from the bottom of the appliance. 1 2 3 4 Fully clean the filters below running water. 1 2 5 Put the filters back. Turn the microfilter clockwise to lock it. Cleaning the spray arm Regularly examine the spray arm. Remove re- maining food from the holes in the spray arm. Do these steps to remove and to put the spra[...]

What to do if… The appliance does not start or stops during op- eration. If there is a fault, first try t o find a solution to the problem yourself. If you ca nnot find a solution to the problem yourself, contact your dealer or the Service Force Centre. Fault code and malfunction Possible cause and solution • digital display shows The dishwashe[...]

The cleaning results are not satisfact ory The dishes are not clean • The selected washin g programme is not applicable for the type of load and soil. • The basket is loaded incorrectly so that water cannot reach all surfaces. • S p r a y a rm d o e s n o t t u r n f r ee l y because of incorrect arrangement of the load. • The filters are d[...]

household waste disposal service or the shop where you purchased th e product. The packaging materials are environmentally friendly and can be recycled. The plastic compo- nents are identified by markings, e.g. >PE<, >PS<, etc. Discard the packaging materials in the appli- cable container at the community waste disposal facilities. Warn[...]

If the water inlet h ose is too short, replace the water inlet hose with an applicable, longer high- pressure hose. Do not connect an extension hose. To suit the installation, it is possible t o turn the end of the hose that is connected to the dish- washer. Do these steps : Connect the inlet hose to a water tap with an external thread of 3/4”. 1[...]

17[...]

18[...]

19[...]

To buy accessories, consumables and spare parts at our online shop please visit: www.zanussi-electrolux.co.uk www.zanus si.com 156986160- 00-012009[...]