ZyXEL Communications P-1100 manual

Prestige 1100 WAN Access Router User's Guide Version 2.50 Nov 1999 ZyXEL T OTAL I NTERNET A CCESS S OLUTION[...]

Prestige 1100 Internet Access Router ii Prestige 1100 WAN Access Router Copyright Copyright © 1999 by ZyXEL Communications Corporation. The contents of this publication may not be reproduced in any part or as a whole, transcribed, stored in a retrieval system, translated into any language, or transmitted in any form or by any means, electronic, me[...]

Prestige 1100 Internet Access Router ZyXEL Limited Warranty iii ZyXEL Limited Warranty ZyXEL warrants to the original end user (purchaser) that this product is free from any defects in materials or workmanship for a period of up to two (2) years from the date of purchase. During the warranty period, and upon proof of purchase, should the product ha[...]

Prestige 1100 Internet Access Router iv Customer Support Customer Support If you have questions about your ZyXEL product or desire assistance, contact ZyXEL Communications Corporation offices worldwide, in one of the following ways: EMAIL – Support Telephone Web Site Method Region EMAIL – Sales Fax FTP Site Regular Mail support@zyxel.com.tw sup[...]

Prestige 1100 Internet Access Router Table of Contents v Table of Contents Customer Support ....................................................................................................... iv Table of Contents .........................................................................................................v List of Figures ..........[...]

Prestige 1100 Internet Access Router vi Table of Contents Chapter 3: Internet Access ...................................................................................... 3-1 3.1 Route IP Setup ....................................................................................................................................... 3-1 3.2 TCP/IP Para[...]

Prestige 1100 Internet Access Router Table of Contents vii 6.4 LAN-to-LAN Application with Novell IPX. ..................................................................................... 6-5 6.4.1 IPX Remote Node Setup ............................................................................................................. 6-6 6.4.2 IPX Stati[...]

Prestige 1100 Internet Access Router viii Table of Contents Chapter 12: System Maintenance ......................................................................... 12-1 12.1 System Status .................................................................................................................................. 12-2 12.2 System Information .[...]

Prestige 1100 Internet Access Router Table of Contents ix Chapter 14: Troubleshooting ................................................................................ 14-1 14.1 Problems Starting Up the Prestige 1100 ...................................................................................... 14-1 14.2 Problems With the WAN Port ..........[...]

[...]

Prestige 1100 Internet Access Router List of Figures xi List of Figures Figure 1 -1 Remote Configuration ..................................................................................................................... 1- 2 Figure 1 -2 Prestige 1100 Front Panel ....................................................................................[...]

Prestige 1100 Internet Access Router xii List of Figures Figure 7 -2 Menu 11.3 - Remote Node Bridging Options ............................................................................... 7-3 Figure 7 -3 Menu 12.3.1 - Edit Bridge Static Route ........................................................................................ 7-4 Figure 8 -1 [...]

Prestige 1100 Internet Access Router List of Tables xiii List of Tables Table 1 -1 LED Func tions ................................................................................................................................... 1- 3 Table 2 -1 Main Menu Commands .....................................................................................[...]

Prestige 1100 Internet Access Router xiv Preface Preface About Your Bridge/Router The Prestige 1100 is a high-performance bridge/router that offers a complete solution for your WAN applications such as Internet access and multi-protocol LAN-to-LAN connections for SMB (Small & Medium Size Businesses). It integrates the routing and bridging funct[...]

Prestige 1100 Internet Access Router Getting to know your Prestige 1 - 1 Chapter 1: Getting to Know Your Bridge/Router The Prestige 1100 is a high-performance bridge/router that offers a complete solution for your WAN applications such as Internet access and multi-protocol LAN-to-LAN connections for SMB (Small & Medium Size Businesses). It inte[...]

Prestige 1100 Internet Access Router 1- 2 Getting to know your Prestige Two 10/100 Ethernet LANs One 10/100M Ethernet interface is designed for high performance LAN environment. The other 10/100M Ethernet interface can be reserved for connecting to a Web/FTP server for public Internet access. Most Complete NAT Support ZyXEL NAT technology supports [...]

Prestige 1100 Internet Access Router Getting to know your Prestige 1 - 3 DHCP Support DHCP (Dynamic Host Configuration Protocol) allows you to dynamically and automatically assign IP address to hosts on your network. Data Compression Your Prestige incorporates Stac data compression to speed up data transfer. Stac is the de facto standard of data co[...]

Prestige 1100 Internet Access Router 1- 4 Getting to know your Prestige 1.3.2 Prestige 1100 Back Panel Figure 1 - 3 Back Panel The diagram above shows the rear panel of your Prestige 1100. Refer to this diagram when making connections. • : POWER INPUT = Power cord receptacle and switch ‚ : LAN1 = RJ-45 10/100 Mbps Ethernet port ƒ : LAN2 = RJ-4[...]

Prestige 1100 Internet Access Router Getting to know your Prestige 1 - 5 Corporate LAN WEB/FTP Server Prestige 1100 INTERNET Leased Line Figure 1 - 4 Internet Access Application Internet Single User Account For a business environment, your Prestige offers the Single User Account (SUA) feature that allows multiple users on the LAN (Local Area Networ[...]

Prestige 1100 Internet Access Router 1- 6 Getting to know your Prestige Multi-protocol/Multilink LAN-to-LAN Connection You can use the Prestige to connect two geographically dispersed networks over the WAN connection. The Prestige supports TCP/IP and Novell IPX routing, as well as transparent bridging for other network layer protocols. A typical LA[...]

Prestige 1100 Internet Access Router Hardware Installation & Initial Setup 2-1 Chapter 2: Hardware Installation & Initial Setup 2.1 Unpacking your Bridge/Router This chapter explains how to connect to the hardware and to perform the initial setup. Before installing be sure that all components listed with the enclosed packing slip are includ[...]

Prestige 1100 Internet Access Router 2-2 Hardware Installation & Initial Setup 2.3 Connect your WAN Bridge/Router 2.3.1 Prestige 1100 Connections This section outlines how to make the connections to your Prestige 1100. Please refer to the following figure when making connections to the P1100. Figure 2 - 1 P1100 Connections Step 1. Connect WAN D[...]

Prestige 1100 Internet Access Router Hardware Installation & Initial Setup 2-3 a DTE (Data Terminal Equipment) device, not a DCE (Data Circuit-terminating Equipment) device, so the null modem is needed to allow connection to the workstation console port, which is of course a DTE device also. Connect the 9-pin (smaller) end of the console cable [...]

Prestige 1100 Internet Access Router 2-4 Hardware Installation & Initial Setup For your first login, enter the default password [1234] . As you enter the password, the screen displays an ( X ) for each character you type. Figure 2 - 3 Login Screen Please note that if there is no activity for longer than 5 minutes after you log in, your Prestige[...]

Prestige 1100 Internet Access Router Hardware Installation & Initial Setup 2-5 2.5 Navigating the SMT Interface The SMT (System Management Terminal ) is the interface that you use to configure your Prestige. Several operations that you should be familiar with before you attempt to modify the configuration are listed in Table 2 - 1 . Table 2 - 1[...]

Prestige 1100 Internet Access Router 2-6 Hardware Installation & Initial Setup The SMT displays the Main Menu , as shown below: Figure 2 - 4 SMT Main Menu The following table shows the Main Menu Summary , Table 2 - 2 Main Menu Summary # Menu Title Description 1 General Setup Use this menu to setup general information and enable routing or bridg[...]

Prestige 1100 Internet Access Router Hardware Installation & Initial Setup 2-7 2.6 Changing the System Password The first thing you should do before anything else is to change the default system password by following the steps below: Step 1. Select option 23. System Security in the Main Menu. This will open Menu 23 - System Security as below: F[...]

Prestige 1100 Internet Access Router 2-8 Hardware Installation & Initial Setup Step 3. When submenu 23.1- System Security -Change Password appears, as shown below, enter the existing system password, i.e., [1234] , then press [ENTER] . Figure 2 - 6 Menu 23.1 - System Security - Change Password Step 4. Enter your new system password and press [E[...]

Prestige 1100 Internet Access Router Hardware Installation & Initial Setup 2-9 2.7 General Setup The Menu 1 - General Setup contains administrative and system-related information. Step 1. Select option 1. General Setup in the Main Menu by typing 1 at the menu selection number prompt. Step 2. The Menu 1 - General Setup screen appears, as shown. [...]

Prestige 1100 Internet Access Router 2-10 Hardware Installation & Initial Setup Table 2 - 3 General Setup Menu Fields Field Description Example System Name Choose a descriptive name for identification purposes. This name can be up to 8 alphanumeric characters long. Spaces are not allowed, but dashes “-” and underscores "_" are acc[...]

Prestige 1100 Internet Access Router Hardware Installation & Initial Setup 2-11 2.8 WAN Setup This section describes how to configure the WAN port and a WAN device using Menu 2- WAN Setup. When you finish the setup, the Prestige uses this information to initialize the WAN port and the attached WAN device. 2.8.1 Prestige 1100 WAN Port Setup Sele[...]

Prestige 1100 Internet Access Router 2-12 Hardware Installation & Initial Setup 2.9 Ethernet Setup This section describes how to configure the Ethernet using Menu 3 – Ethernet Setup. There are actually three Menu 3s: 1st. Menu 3 – Ethernet Setup – allows you to select the LAN (1 or 2) you wish to configure. 2nd. Menu 3 - Ethernet Setup (L[...]

Prestige 1100 Internet Access Router Hardware Installation & Initial Setup 2-13 2.10 General Ethernet Setup This menu allows you to specify the filter sets that you wish to apply to the Ethernet traffic. You seldom need to filter Ethernet traffic, however, the filter sets may be useful to block certain packets, reducing traffic and preventing s[...]

[...]

Prestige 1100 Internet Access Router Internet Access 3-1 Chapter 3: Internet Access This chapter shows you how to configure the LAN as well as the WAN of your Prestige for Internet access . 3.1 Route IP Setup The first step is to enable the IP routing in Menu 1 - General Setup. To edit Menu 1, enter 1 in the Main Menu to select 1. General Setup and[...]

Prestige 1100 Internet Access Router 3-2 Internet Access 3.2 TCP/IP Parameters 3.2.1 IP Address and Subnet Mask Similar to the houses on a street that share a common street name, the machines on a LAN share one common network number, also. Where you obtain your network number depends on your particular situation. If the ISP (Internet Service Provid[...]

Prestige 1100 Internet Access Router Internet Access 3-3 3.2.3 DHCP Configuration DHCP (Dynamic Host Configuration Protocol ) allows the individual clients (workstations) to obtain the TCP/IP configuration at start-up from a centralized DHCP server. The Prestige 1100 has the DHCP server capability built-in. The DHCP server is disabled when [DHCP=] [...]

Prestige 1100 Internet Access Router 3-4 Internet Access Figure 3 - 2 Menu 3.2 - TCP/IP and DHCP Ethernet Setup Table 3 - 1 DHCP Ethernet Setup Menu Fields Field Description Example DHCP Setup DHCP= This field enables/disables the DHCP server or client. If it is set to [Server] , your Prestige will act as a DHCP server. If set to [None], the DHCP s[...]

Prestige 1100 Internet Access Router Internet Access 3-5 Follow Table 3 - 2 to configure TCP/IP parameters for the Ethernet port. Table 3 - 2 TCP/IP Ethernet Setup Menu Fields Field Description Example TCP/IP Setup IP Address Enter the IP address of your Prestige 1100 in dotted decimal notation. 192.168.1.1 IP Subnet Mask Your Prestige 1100 will au[...]

Prestige 1100 Internet Access Router 3-6 Internet Access is also compatible with version 1. The multicast setting can be turned on or off on Ethernet and remote nodes. For IP routing policy information, please refer to Chapter 13: IP Routing Policy. 3.5 Internet Access Configuration Menu 4 allows you to enter the Internet access parameters in one s[...]

Prestige 1100 Internet Access Router Internet Access 3-7 Table 3 - 4 contains instructions on how to configure your Prestige 1100 for Internet access. Table 3 - 4 Internet Access Setup Menu Fields Field Description Observation ISP's Name Enter the name of your Internet Service Provider. (This information is for identification purposes only.) m[...]

Prestige 1100 Internet Access Router 3-8 Internet Access 3.6 Single User Account Typically, if there are multiple users on the LAN wanting to concurrently access the Internet, you will have to lease a block of legal, or globally unique, IP addresses from the ISP. The Single User Account (SUA) feature allows you to have the same benefits as having m[...]

Prestige 1100 Internet Access Router Internet Access 3-9 If you do not define any server, SUA offers the additional benefit of firewall protection. If no server is defined, all incoming inquiries will be filtered out by your Prestige and thus preventing intruders from probing your network. Your Prestige accomplishes this address sharing by translat[...]

Prestige 1100 Internet Access Router 3-10 Internet Access To enable the SUA feature in Menu 4, move the cursor to the Single User Account field and select [Yes] (or [No] to disable SUA). Then follow the instructions on how to configure the SUA fields in the following table. Table 3 - 5 Single User Account Menu Fields Field Description Single User A[...]

Prestige 1100 Internet Access Router Internet Access 3-11 3.7 LANs & WANs A LAN (Local Area Network) is a computer network limited to the immediate area, usually the same building or floor of a building. A WAN (Wide Area Network), on the other hand is an outside connection to another network or the Internet. 3.7.1 LANs, WANs and the Prestige Th[...]

[...]

Prestige 1100 Internet Access Router Remote Node Configuration 4-1 Chapter 4: Remote Node Configuration for LAN to LAN A remote node is required for placing calls to a remote gateway. A remote node represents both the gateway and the network behind it across a WAN connection. Note that when you use Menu 4 to set up Internet access, you are actually[...]

Prestige 1100 Internet Access Router 4-2 Remote Node Configuration Table 4 - 1 Remote Node Profile Menu Fields for Leased Lines Field Description Options Rem Node Name This is a required field [?]. Enter a descriptive name for the remote node, e.g., Corp. This field can be up to eight characters. This name must be unique from any other remote node [...]

Prestige 1100 Internet Access Router Remote Node Configuration 4-3 Field Description Options Edit PPP Options To edit the PPP options for this remote node, move the cursor to this field, use the space bar to select [Yes] and press [Enter]. This will bring you to Menu 11.2 - Remote Node PPP Options . For more information on configuring PPP options, [...]

Prestige 1100 Internet Access Router 4-4 Remote Node Configuration Figure 4 - 2 Menu 11.2 - Remote Node PPP Options Table 4 - 2 Remote Node PPP Options Menu Fields describes the Remote Node PPP Options Menu, and contains instructions on how to configure the PPP options fields. Table 4 - 2 Remote Node PPP Options Menu Fields Field Description Option[...]

Prestige 1100 Internet Access Router Remote Node TCP/IP Configuration 5-1 Chapter 5: Remote Node TCP/IP Configuration This chapter shows you how to configure the TCP/IP parameters of a remote node. 5.1 LAN-to-LAN Application A typical LAN-to-LAN application is to use your Prestige to connect a branch office to the headquarters, as depicted in the f[...]

Prestige 1100 Internet Access Router 5-2 Remote Node TCP/IP Configuration 5.2 Remote Node Setup Follow the procedure in the Remote Node Configuration Chapter to configure the protocol-independent parameters in Menu 11 - Remote Node Profile. For the TCP/IP parameters, follow the instructions below. Follow the steps below to edit Menu 11.3 - Remote N[...]

Prestige 1100 Internet Access Router Remote Node TCP/IP Configuration 5-3 The following diagram in Figure 5 - 3 explains the Sample IP Addresses to help you to understand the field of My Wan Address in Menu 11.3. 192.168.1.0 10.0.0.0 172.16.0.2 172.16.0.1 Remote Network Local Network 192.168.1.1 10.0.0.1 Figure 5 - 3 Sample IP Addresses for a TCP/I[...]

Prestige 1100 Internet Access Router 5-4 Remote Node TCP/IP Configuration The following table shows the TCP/IP related fields in Menu 11.3 - Remote Node Network Layer Options . Table 5 - 2 Remote Node TCP/IP Configuration Field Description Option Rem IP Address This shows the IP address you entered for this remote node in the previous menu, Remote [...]

Prestige 1100 Internet Access Router Remote Node TCP/IP Configuration 5-5 Field Description Option RIP Direction= Press the space bar to select the RIP direction from [Both]/[In Only]/[Out Only]/[None]. [Both]/[In Only]/[Out Only]/[None] Version= Press the space bar to select the RIP version from [RIP- 1]/[RIP-2B]/[RIP-2M]. [RIP-1]/ [RIP- 2B]/ [RIP[...]

Prestige 1100 Internet Access Router 5-6 Remote Node TCP/IP Configuration 5.3 Static Route Setup Static routes tell the Prestige routing information that it cannot learn automatically through other means. This can arise in cases where RIP is disabled on the LAN or a remote network is beyond the one that is directly connected to a remote node. Each [...]

Prestige 1100 Internet Access Router Remote Node TCP/IP Configuration 5-7 Figure 5 - 5 Menu 12 - Static Route Setup From Menu 12, select one of the available IP static routes to open Menu 12.1 - IP Static Route Setup, as shown below. Figure 5 - 6 Menu 12.1 - IP Static Route Setup Choosing a static route to edit produces the following screen. Figure[...]

Prestige 1100 Internet Access Router 5-8 Remote Node TCP/IP Configuration The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup . Table 5 - 3 Edit IP Static Route Menu Fields Field Description Options Route # This is the index number of the route as listed in Menu 12.1 – IP Static Route Setup. Route Name Enter a [...]

Prestige 1100 Internet Access Router IPX Configuration 6-1 Chapter 6: IPX Configuration This chapter shows you how to configure the IPX parameters of the Prestige 1100. 6.1 IPX Network Environment Novell bundles the protocol stack, the server software and routing functionality in their NetWare server products. So a NetWare server is not only a file[...]

Prestige 1100 Internet Access Router 6-2 IPX Configuration Figure 6 - 1 NetWare Network Numbers 6.1.3 External Network Number Each of the four logical networks (based on frame type) has its own external network number. 6.1.4 Internal Network Number In addition to the external network numbers, each NetWare server has its own internal network number [...]

Prestige 1100 Internet Access Router IPX Configuration 6-3 l LAN with a server (server side) l LAN without a server (client side) Prestige 1100 Prestige 1100 Seed Router (Client Side) Network Number Assigns Not Seed Router (Server Side) Network Number Learns Netware Clients Netware Server Figure 6 - 2 Prestige in an IPX Environment 6.2.1 Prestige 1[...]

Prestige 1100 Internet Access Router 6-4 IPX Configuration 6.3 IPX Ethernet Setup From Menu 3 - Ethernet . Setup, select option 3. Novell IPX Setup from the appropriate LAN to go to Menu 3.3 - Novell IPX Ethernet Setup as shown in Figure 6 - 3 . Figure 6 - 3 Menu 3.3 - Novell IPX Ethernet Setup The following Table 6 - 1 describes the Novell IPX Eth[...]

Prestige 1100 Internet Access Router IPX Configuration 6-5 6.4 LAN-to-LAN Application with Novell IPX . A typical LAN-to-LAN application is to use your Prestige to call from a branch office to the corporate headquarters to enable the stations in the branch office to access the NetWare servers at the headquarters, as depicted in Figure 6 - 4 Prestig[...]

Prestige 1100 Internet Access Router 6-6 IPX Configuration 6.4.1 IPX Remote Node Setup Follow the procedure in Chapter 5 to configure the protocol-independent parameters in Menu 11.1 - Remote Node Profile. For the IPX-related parameters in Menu 11.3 - Remote Node Network Layer Options, follow the instructions below. To edit Menu 11.3 - Remote Node [...]

Prestige 1100 Internet Access Router IPX Configuration 6-7 Table 6 - 2 describes the IPX protocol-dependent parameters of the remote node Setup. Table 6 - 2 Remote Node Novell IPX Options Field Description Option Rem LAN Net # In this field, enter the internal network number of the NetWare server on the remote LAN. My WAN Net # In this field, enter[...]

Prestige 1100 Internet Access Router 6-8 IPX Configuration 6.4.2 IPX Static Route Setup Similar to IP, IPX static routes tell the Prestige how to reach servers beyond a remote node before a connection to that remote node is established. From Menu 12, select two, then select one of the IPX Static Routes to open Menu 12.2.1 - Edit IPX Static Route, a[...]

Prestige 1100 Internet Access Router IPX Configuration 6-9 Table 6 - 3 Edit IPX Static Route Menu Fields Field Description Route # This is the index number of the route as listed in Menu 12.2 – IPX Static Route Setup. Server Name In this field, enter the name of the server. This must be the exact name configured in the NetWare server . Active Thi[...]

[...]

Prestige 1100 Internet Access Router Bridge Setup 7-1 Chapter 7: Bridging Setup This chapter shows you how to configure the bridging parameters of your Prestige 1100. 7.1 Bridging in General Bridging bases the forwarding decision on the MAC (Media Access Control ), or hardware address, while routing does on the network layer (IP or IPX) address. Br[...]

Prestige 1100 Internet Access Router 7-2 Bridge Setup From Menu 3 - Ethernet Setup , enter option 4. Bridge Setup for the appropriate LAN and Men u 3.4 - Bridge Ethernet Setup displays as shown in Figure 7 - 1 . Figure 7 - 1 Menu 3.5 - Bridge Ethernet Setup 7.2.1 Remote Node Bridging Setup Follow the procedure in Chapter 5 to configure the protocol[...]

Prestige 1100 Internet Access Router Bridge Setup 7-3 Figure 7 - 2 Menu 11.3 - Remote Node Bridging Options Table 7 - 1 describes the bridging-dependent parameters in the Remote Node Profile and Network Layers menus. Table 7 - 1 Remote Node Bridge Options Field Description Bridge (Menu 11) Make sure this field is set to [Yes]. Edit IP/IPX/Bridge (M[...]

Prestige 1100 Internet Access Router 7-4 Bridge Setup 7.2.2 Bridge Static Route Setup Similar to network layer static routes, a bridging static route tells the Prestige 1100 about the route to a node before a connection is established. You configure bridge static routes in Menu 12.3.1(go to Menu 12, choose option 3, then choose a static route to ed[...]

Prestige 1100 Internet Access Router Filter Configuration 8-1 Chapter 8: Filter Configuration 8.1 About Filtering Your Prestige uses filters to decide whether or not to allow passage of a packet. Data filtering is divided into incoming and outgoing filters, depending on the direction of the packet relative to a port. The following sections describe[...]

Prestige 1100 Internet Access Router 8-2 Filter Configuration Start Packet into Filter Accept Packet Drop Packet Fetch Next Filter Set Next Filter Set Available? Yes Filter Set Fetch First Filter Rule Execute Filter Rule Next Filter Rule Available? Fetch Next Filter Rule No Fetch First Filter Set Yes Check Next Rule Drop No Forward Figure 8 - 1 Fil[...]

Prestige 1100 Internet Access Router Filter Configuration 8-3 8.3 Configuring a Filter Set To configure a filter sets, follow the procedure below: Step 1. Enter 21 from the Main Menu to open Menu 21 - Filter Set Configuration . Figure 8 - 2 Menu 21 - Filter Set Configuration Step 2. Enter the index of the filter set you wish to configure (no. 1-12)[...]

Prestige 1100 Internet Access Router 8-4 Filter Configuration Figure 8 - 3 Menu 21.1 - Filter Rules Summary 8.3.1 Filter Rules Summary Menu These screens show a summary of the existing rules in an example filter set. The following tables contain a brief description of the abbreviations used in Menu 21.1 and 21.2. Table 8 - 1 Abbreviations Used in t[...]

Prestige 1100 Internet Access Router Filter Configuration 8-5 Abbreviations Description Display M Refers to More . [Y] means an action can not yet be taken as there are more rules to check, which are concatenated with the present rule to form a rule chain. When the rule chain is complete an action can be taken. [N] means you can now specify an acti[...]

Prestige 1100 Internet Access Router 8-6 Filter Configuration Table 8 - 3 Abbreviations Used If Filter Type Is IPX Abbreviation Description PT IPX Packet Type SS Source Socket DS Destination Socket l If the filter type is Dev (device), the following abbreviations listed in the following table will be used. Table 8 - 4 Abbreviations Used If Filter T[...]

Prestige 1100 Internet Access Router Filter Configuration 8-7 Figure 8 - 4 Protocol and Device Filter Sets To speed up filtering, all rules in a filter set must be of the same type, i.e., Protocol filters or Device filters. The class of a filter set is determined by the first rule that you create. When applying the filter sets to a port, separate m[...]

Prestige 1100 Internet Access Router 8-8 Filter Configuration Figure 8 - 5 Menu 21.1.1 - TCP/IP Filter Rule The following table describes how to configure your TCP/IP filter rule. Table 8 - 5 TCP/IP Filter Rule Menu Fields Field Description Option Filter # This is the filter set, filter rule co-ordinates, i.e., 2,3 refers to the second filter set a[...]

Prestige 1100 Internet Access Router Filter Configuration 8-9 Field Description Option Destination: Port # Enter the destination port of the packets that you wish to filter. The range of this field is 0 to 65535. This field is a don’t-care if it is 0. 0-65535 Destination: Port # Comp Select the comparison to apply to the destination port in the p[...]

Prestige 1100 Internet Access Router 8-10 Filter Configuration The following diagram illustrates the logic flow of an IP filter. Packet into IP Filter Matched Matched Yes Action Matched Action Not Matched More? No Filter Active? Check IP Protocol Drop Drop Packet Accept Packet Drop Forward Check Next Rule Check Next Rule Check Next Rule Forward Not[...]

Prestige 1100 Internet Access Router Filter Configuration 8-11 8.4.3 Novell IPX Filter Rule This section shows you how to configure an IPX filter rule. IPX filters allow you to base the rules on the fields in the IPX headers. To configure an IPX rules, select [IPX Filter Rule] from the [Filter Type] field and press Enter to open Menu 21.1.1 IPX Fil[...]

Prestige 1100 Internet Access Router 8-12 Filter Configuration The table below describes the IPX Filter Rule. Table 8 - 6 IPX Filter Rule Menu Fields Field Description Option Filter # This is the filter set, filter rule co-ordinates, i.e., 2,3 refers to the second filter set and the third filter rule of that set. e.g., 2,3 Filter Type Use the space[...]

Prestige 1100 Internet Access Router Filter Configuration 8-13 Field Description Option Source Socket # Enter the source socket number (2-byte in hexadecimal) of the packets that you wish to filter. e.g.,7777 Source Socket # Comp Select the comparison you wish to apply to the source socket in the packet against that specified above. [None]/[Equal]/[...]

Prestige 1100 Internet Access Router 8-14 Filter Configuration Figure 8 - 8 Menu 21.1.2 - Device Filter Rule The following table describes the fields in the Device Filter Rule Menu. Table 8 - 7 Device Filter Rule Menu Fields Field Description Option Filter # This is the filter set, filter rule co-ordinates, i.e., 2,3 refers to the second filter set[...]

Prestige 1100 Internet Access Router Filter Configuration 8-15 Field Description Option Log Select the logging option from the following: l [None] – No packets will be logged. l [Action Matched] - Only packets that match the rule parameters will be logged. l [Action Not Matched] - Only packets that do not match the rule parameters will be logged.[...]

Prestige 1100 Internet Access Router 8-16 Filter Configuration 8.5.2 Remote Node Filters Go to Menu 11.1 (shown next) and enter the number(s) of the filter set(s) as appropriate. You can specify up to four filter sets by entering their numbers separated by commas. Figure 8 - 10 Filtering Remote Node traffic Menu 11.1 - Remote Node Profile Rem Node [...]

Prestige 1100 Internet Access Router SNMP Configuration 9-1 Chapter 9: SNMP Configuration 9.1 About SNMP SNMP (Simple Network Management Protocol) is a protocol for network management and monitoring. Your Prestige 1100 supports SNMP agent functionality, which allows a manager station to manage and monitor the Prestige 1100 through the network. Keep[...]

Prestige 1100 Internet Access Router 9-2 SNMP Configuration The following table describes the SNMP configuration parameters. Table 9 - 1 SNMP Configuration Menu Fields Field Description Default Get Community Enter the Get Community, which is the password for the incoming Get- and GetNext- requests from the management station. Public Set Community E[...]

Prestige 1100 Internet Access Router System Security 10-1 Chapter 10: System Security This chapter covers Menu 23, which is for you to change the system password and to configure an external authentication server. 10.1 Changing the System Password To change the system password , following steps below: Step 1. Select option 23. System Security in th[...]

Prestige 1100 Internet Access Router 10-2 System Security Step 2. From the System Security Menu, select option 1. Change Password to open Menu 23.1 - System Security - Change Password. Step 3. Enter your existing system password and press [ENTER] . Figure 10 - 2 Menu 23.1 - System Security - Change Password Step 4. Enter your new system password an[...]

Prestige 1100 Internet Access Router Telnet Configuration 11-1 Chapter 11: Telnet Configuration and Capabilities 11.1 About Telnet Configuration Before the Prestige 1100 is properly setup for TCP/IP, the only option for configuring it is through the console port. Once your Prestige 1100 is configured, you can use telnet to configure it remotely. Co[...]

Prestige 1100 Internet Access Router 11-2 Telnet Configuration 11.2 Telnet Under SUA When Single User Account (SUA) is enabled and an inside server is specified, telnet connections from the outside will be forwarded to the inside server. So to configure the Prestige via telnet from the outside, you must first telnet to the inside server, and then t[...]

Prestige 1100 Internet Access Router System Maintenance 12-1 Chapter 12: System Maintenance This chapter covers the diagnostic tools that help you to maintain your Prestige. These tools include updates on system status, port status, log and trace capabilities and upgrades for the system software. This chapter describes how to use these tools in det[...]

Prestige 1100 Internet Access Router 12-2 System Maintenance 12.1 System Status The first selection, System Status gives you the status and statistics of the ports, as shown below. System Status is a tool that can be used to monitor your Prestige. Specifically, it gives you information on WAN port status, number of packets sent and number of packet[...]

Prestige 1100 Internet Access Router System Maintenance 12-3 Table 12 - 1 System Maintenance - Status Menu Fields Field Description Status The status of the WAN port. TXPkts The number of transmitted packets on this channel. RXPkts The number of received packets on this channel. Errors The number of error packets on this channel. Tx (Byte / s) The [...]

Prestige 1100 Internet Access Router 12-4 System Maintenance 12.2 System Information Step 1. Select option 24 from the Main Menu to open Menu 24 - System Maintenance . Step 2. From Menu 24, select option 2 then select the first option from Menu 24.2 to display Menu 24.2.1 - System Maintenance – Information . Figure 12 - 3 System Maintenance – I[...]

Prestige 1100 Internet Access Router System Maintenance 12-5 12.2.1 Console Port Speed Step 1. Select option 24 from the Main Menu to open Menu 24 - System Maintenance . Step 2. From Menu 24, select option 2 then select the second option from Menu 24.2 to display Menu 24.2.2 – System Maintenance – Change Console Port Speed. You can change the c[...]

Prestige 1100 Internet Access Router 12-6 System Maintenance Examples of typical error and information messages are presented in the figure below. Figure 12 - 5 Examples of Error and Information Messages 12.3.2 Syslog And Accounting The Prestige uses the UNIX syslog facility to log system messages to a syslog server. Syslog and accounting can be co[...]

Prestige 1100 Internet Access Router System Maintenance 12-7 Table 12 - 3 System Maintenance Menu Syslog Parameters Parameter Description Active Use the space bar to turn on or off syslog. Syslog IP Address Enter the IP Address of your syslog server. Log Facility Use the space bar to toggle between the 7 different Local options. The log facility al[...]

Prestige 1100 Internet Access Router 12-8 System Maintenance The following table describes the diagnostic tests available in Menu 24.4 for your Prestige and the connections. Table 12 - 4 System Maintenance Menu Diagnostic Field Description Ping Host This diagnostic test pings the host, which determines the functionality of the TCP/IP protocol on bo[...]

Prestige 1100 Internet Access Router System Maintenance 12-9 Table 12 - 5 Filename Conventions File type Internal Name Description AT Command External Name Configuration File Rom-spt This is the router configuration filename on the Prestige when you are backing up and restoring files (menus 24.5 and 24. 6). The rom-spt file contains your Prestige c[...]

Prestige 1100 Internet Access Router 12-10 System Maintenance Figure 12 - 8 Menu 24.5 –Backup Configuration using the Console Port 12.6.2 Back up using FTP To transfer the configuration file, follow the procedure below: Step 1. Launch the FTP client on your workstation. Step 2. Type open and the IP address of your Prestige. Then type root and you[...]

Prestige 1100 Internet Access Router System Maintenance 12-11 To transfer the configuration file, follow the procedure below: Use telnet from your workstation to connect to the Prestige and log in. Because TFTP does not have any security checks, the Prestige records the IP address of the telnet client and accepts TFTP requests only from this addres[...]

Prestige 1100 Internet Access Router 12-12 System Maintenance Prestige. This restores the configuration to your Prestige. Step 4. The system reboots automatically after the file transfer process is complete. For details on FTP commands, please consult the documentation of your FTP client program. Figure 12 - 11 Restore Configuration using FTP 12.7.[...]

Prestige 1100 Internet Access Router System Maintenance 12-13 normal conditions is not recommended since FTP or TFTP is faster. Please note that the system reboots automatically after the file transfer process is complete. Figure 12 - 12 Menu 24.7 -- System Maintenance - Upload Firmware 12.8.1 Dual Firmware Block Structure The Prestige P1100 employ[...]

Prestige 1100 Internet Access Router 12-14 System Maintenance Figure 12 - 13 Menu 24.7.1 –Upload ZyNOS Code using the Console Port. 12.8.3 Upload Router Firmware using FTP To transfer the firmware, follow the procedure below: Step 1. Launch the FTP client on your workstation. Step 2. Type open and the IP address of your Prestige. Then type root a[...]

Prestige 1100 Internet Access Router System Maintenance 12-15 12.8.4 Upload Router Firmware using TFTP Even though TFTP should work over WAN as well, it is not recommended. To use TFTP, your workstation must have both telnet and TFTP clients. Use telnet from your workstation to connect to the Prestige and log in. Because TFTP does not have any secu[...]

Prestige 1100 Internet Access Router 12-16 System Maintenance Step 4. After successful file transfer, enter "atgo" to restart the router . Figure 12 - 15 Menu 24.7.2 –Upload Router Configuration File. 12.9.2 Upload Router Configuration File using FTP To upload the router configuration file, follow the procedure below: Step 1. Launch the[...]

Prestige 1100 Internet Access Router System Maintenance 12-17 12.9.3 Upload Router Configuration File using TFTP Even though TFTP should work over WAN as well, it is not recommended. To use TFTP, your workstation must have both telnet and TFTP clients. To transfer the configuration file, follow the procedure below. Use telnet from your workstation [...]

Prestige 1100 Internet Access Router 12-18 System Maintenance 12.9.4 Boot Module Commands Prestige boot module commands are shown below. For ATBAx, x denotes the number preceding the colon to give the baud rate following the colon in the list of numbers that follows; e.g. ATBA3 will give a baud of 9.6 kbps. ATSE displays the seed that is used to ge[...]

Prestige 1100 Internet Access Router System Maintenance 12-19 12.10 Command Interpreter Mode This option allows you to enter the command interpreter mode. A list of valid commands can be found by typing [help] at the command prompt. For more detailed information, check the ZyXEL Web site or send e- mail to the ZyXEL Support Group. Please note that [...]

[...]

Prestige 1100 Internet Access Router IP Policy Routing 13-1 Chapter 13: IP Policy Routing 13.1 Introduction Traditionally, routing is based on the destination address only and the router takes the shortest path to forward a packet. IP Policy Routing (IPPR) provides a mechanism to override the default routing behavior and alter the packet forwarding[...]

Prestige 1100 Internet Access Router 13-2 IP Policy Routing 13.1.3 IP Policy Routing Setup Menu 25 shows all the policies defined Figure 13 - 1 IP Routing Policy Setup To setup a routing policy, follow the procedures below: Step 1. Enter 25 in the Main Menu to open Menu 25 – IP Policy Routing Setup. Step 2. Enter the index of the policy set you w[...]

Prestige 1100 Internet Access Router IP Policy Routing 13-3 Figure 13 - 2 Menu 25 - IP Routing Policy Summary Menu 25.1 - IP Routing Policy Summary # A Criteria/Action - - -------------------------------------------------------------------------- 1 Y SA=1.1.1.1-1.1.1.1,DA=2.2.2.2-2.2.2.5 SP=20-25,DP=20-25,P=6,T=NM,PR=0 |GW=192.168.1.1,T=MT,PR=0 2 N[...]

Prestige 1100 Internet Access Router 13-4 IP Policy Routing Table 13 - 1 IP Routing Policy Summary Abbreviation Meaning Criteria SA Source IP address SP Source port DA Destination IP address DP Destination port P IP layer 4 protocol number(TCP=6,UDP=17…) T Type Of Service of Incoming packet PR Precedence of incoming packet Action GW Gateway IP ad[...]

Prestige 1100 Internet Access Router IP Policy Routing 13-5 Table 13 - 2 IP Routing Policy Field Description Policy Set Name This is the name of the policy set assigned in Menu 25 - IP Routing Policy Setup. Active Press the [SPACEBAR] to select [Yes] to activate the policy. Criteria IP Protocol IP layer 4 protocol, e.g., UDP, TCP, ICMP, etc. Type o[...]

Prestige 1100 Internet Access Router 13-6 IP Policy Routing 13.2 Applying an IP Policy This section shows you where to apply the IP Policies after you design them. 13.2.1 Ethernet IP Policies From Menu 3 - Ethernet Setup, enter 2 to go to Menu 3.2 -General Ethernet Setup. You can choose up to four IP Policy sets (from twelve) by entering their numb[...]

Prestige 1100 Internet Access Router IP Policy Routing 13-7 Figure 13 - 5 Menu 11.3 - Remote Node Network Layer Options Menu 11.3 - Remote Node Network Layer Options IP Options: Rem IP Addr: 0.0.0.0 Rem Subnet Mask= 0.0.0.0 My WAN Addr= 0.0.0.0 Single User Account= No Metric= 2 Private= No RIP Direction= Both Version= RIP-2B Multicast = IGMP-v2 IP [...]

[...]

Prestige 1100 Internet Access Router Troubleshooting 14-1 Chapter 14: Troubleshooting This chapter covers the potential problems you may run into and the possible remedies. After each problem description, some instructions are provided to help you to diagnose and to solve the problem. 14.1 Problems Starting Up the Prestige 1100 Table 14 - 1 Trouble[...]

Prestige 1100 Internet Access Router 14-2 Troubleshooting 14.2 Problems With the WAN Port Table 14 - 2 Troubleshooting a WAN Port Connection Troubleshooting Corrective Action Check if the WAN port is connected to an external WAN device. RDY LED of a WAN Port is not ON Check if the power of the external WAN device is turned on. 14.3 Problems with th[...]

Prestige 1100 Internet Access Router Acronyms & Abbreviations A Acronyms and Abbreviations BAP/BACP Bandwidth Allocation Protocol/Bandwidth Allocation Control protocol BOD Bandwidth on Demand CDR Call Detail Record CHAP Challenge Handshake Authentication Protocol CLID Calling Line IDentification CSU/DSU Channel Service Unit/Data Service Unit DC[...]

Prestige 1100 Internet Access Router B Acronyms & Abbreviations SAP (IPX) Service Advertising Protocol SNAP Sub-Network Access Protocol SNMP Simple Network Management Protocol SUA Single User Account TA (ISDN) Terminal Adapter TCP Transmission Control Protocol UDP User Datagram Protocol STP Shielded Twisted Pair (cable) WAN Wide Area Network[...]

Prestige 1100 Internet Access Router Index C Index A Action Matched, 8-5 Applications, 4 Internet Access, 4 SUA, 5 LAN-to-LAN, 6, 5-1 Authentication , 4-2 , 4-3 B Back Panel, 4 Boot Module Commands, 12-18 Bridging, 2, 6, 2-10, 4-2 , 7-1 Ether Address, 7-4 Ethernet, 7-1 Ethernet Addr Timeout, 7-3 Remote Node, 7-2 Static Route Setup, 7-4 C CHAP , 4-2[...]

Prestige 1100 Internet Access Router D Index G G ateway , 5-8 General Setup, 2-9 Menu Fields, 2-10 H Hop Count , 6-7 , 6-9 I IANA. See Internet Assigned Number Authority Initial Screen, 2-3 Interactive Applications, 13-1 Internet access, 3-1 Internet Access Configuration, 3-6 Internet Assigned Number Authority, 3-2 Internet Service Provider, 3-2 IP[...]

Prestige 1100 Internet Access Router Index E Q Quality of Service, 13-1 R Remote Configuration, 2 Remote Node, 4-1, 12-3 Leased Line, 4-1 TCP/IP, 5-1 Remote Node Setup, 5-2 RIP. See Routing Information Protocol RJ-45, 2-3 Route IP Setup, 3-1 Routing Information Protocol, 3-2 Direction, 3-2 Version, 3-2 Routing Policy, 13-1 S SAP/RIP Timeout , 6-7 S[...]

Prestige 1100 Internet Access Router F Index V VT100, 2-1 W WAN port, 2-2 WAN Setup, 2-11 Watchdog , 6-7 Z ZyNOS , 12-4 , 12-13, 12-14, 13-1 ZyXEL Limited Warranty, iii[...]