Acer 4060 manuel d'utilisation

TravelMate 4060 Series Service Guide PRINTED IN T AIW AN Service guide files and updates are availab le on the ACER/CSD web; for more information, please refer to http://csd.acer .com.tw[...]

II Revision History Please refer to the table below for the up dates made on T ravelMate 4060 service guide. Date Chapter Up dates 200512/27 Chapter 1 Revise memory specification to 533MHz o n page 19. 2006/01/17 Chapter 1 Update LCD panel specification on page 25. 2006/02/15 Chapter 3 Revise disa ssembling SOP on chapter 3. 2006/9/18 Chapter 6 Rev[...]

III Copyright Copyright © 2005 by Acer Incorporated. All rights reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any lan guage or computer languag e, in any form or by any means, electronic, mechanical, magne tic, optical, chemi cal, manual or otherwise, without the[...]

IV Conventions The following conventi ons are used in this manual: SCREEN MESSAGES Denotes actual messages that appe ar on screen. NOTE Gives bits and pieces of additional information related to the current topic. W ARNING Alerts you to any damage that might result from doing or not doing specific actions. CAUTION Gives precautionary measures to av[...]

V Preface Before using this information and the product it s upports, please read the fo llowing general info rmation. 1. This Service Guide provides you with all techni cal information relating to the BASIC CON FIGURA TION decided for Acer's "glo bal" product offering. T o better fit local market requirements and enhance prod uct co[...]

VI[...]

VII Chapter 1 System Introduction 1 Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .1 System Block Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Board Layout . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

VIII Disassembling the LCD Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 Disassembling the External Modules . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57 Disassembling the HDD Module . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .57 Disassembling [...]

IX[...]

Chapter 1 1 Features This computer was designed with the user in mind . Here are just a few of its many features: Plat form T Intel ® Pentiu m ® M 730/740/750/760/770/780 processor (2MB L2 cache, 1.60/1.73/1. 86/2/2.13/ 2.26 GHz, 533 MHz FSB) T Intel ® Pentiu m ® M 725 processor (2MB L2 Cache, 1.60 GHz, 400 MHz FSB) T Intel Celeron M pro cessor[...]

2 T ravelMate 4060 Input devices T 88-/89-key Acer FineT ouch TM keyboard T T ouchpad with 4-way integrated scroll button T Four easy-launch buttons T T wo front-panel buttons: wireless LED-button and Blue tooth ® LED-button I/O interface T Three USB 2.0 port s T Ethernet (RJ-45) port T Modem (RJ-1 1) port T External display (VGA) port T Microphon[...]

Chapter 1 3 System Block Diagram 1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 A A B B C C D D INTEL Mobile_ 479 CPU DDR-II ATA 66/100 HD Audio AUDIO CODEC DDR-II SODIMM1 DDR-II SODIMM2 IDE-ODD PATA HDD ATA 66/100 RJ11 Page: 19 Page: 16 Page: 16 Page: 10 CLOCK GEN ICS954206 Page:2, 3 Page: 5, 6 , 7, 8 Page: 12 , 13 , 14 Page:4 LINE OUT INTEL ALVISO 915GM NB SB D[...]

4 T ravelMate 4060 Board Layout To p V i e w[...]

Chapter 1 5 Bottom View 1 SW1 Lid Switch 2 CN1 LCD Connector 3 CN2 Launch Board Connector 4 CN3 Modem Connector 5 CN7 Keyboard Connector 6 CN4 Bluetooth Module Connector 7 CN5 T ouchpad Board Connector 8 CN6 Internal Microphone Connector 9 U17 Clock Generator 10 U4 PCMCIA Connector 1 1 CN9 MDC Connector 12 CN1 1 Internal S peaker Connector 13 CN13 [...]

6 T ravelMate 4060 21 CN20 USB Connector 22 CN21 USB Connector 23 U19 BIOS ROM 24 U4 EC PC97551 (Power and I/O Connector) 25 CN22 RTC Battery 26 CN18 Memory Socket 1 27 U1 LAN Chipset RTL8100CL 28 CN19 Memory Socket 2 29 U18 South Bridge 30 CN24 PCMCIA Connector 31 CN25 HDD Connector 32 CN27 USB Connector 33 CN28 Line-out/SPEDIF Jack 34 CN29 Microp[...]

Chapter 1 7 Panel This is a brief introduction to the I/O ports, the features and the indicators. Front view # Item Description 1 Display screen Also called LCD (Liquid Crystal Displ ay), displays computer output. 2 Microphone Internal microphone for sound recording. 3 Keyboard For entering data into you computer . 4 Palmrest Comfortable support ar[...]

8 T ravelMate 4060 Closed front view Lef t view # Icon Item/ Port Description 1 S peakers Left and right speak ers deliver stereo audio output. 2 Power indicator Lights up when the computer is on. 3 Battery indicator Lights up when the battery is being charged. 4 Bluetooth communication button/ indicator Press to enable/disable the Bluetooth functi[...]

Chapter 1 9 Right view Rear view # Icon Item/ Port Description 1 Optical drive Internal optical drive; accepts CDs or DVDs depending on the optical drive type. 2 LED indicator Lights up when t he optical drive is active. 3 Optical drive eject button Ejects the optical drive tray from the drive. 4 Emergency eject hole Ejects the optical drive tray w[...]

10 T ravelMate 4060 Bottom view # Icon Port Description 1 Power jack Connects to an AC adaptor . 2 External display port Connects to a display device (e.g., external monitor , LCD projector). 3 Security keylock Conn ects to a Kensington-compatible computer security lock. # Item Description 1 Hard disc bay Houses the computer ’s hard disc (secured[...]

Chapter 1 11 Indicators The computer has three easy-to-read status icons on t he upper-right above the keyboa rd, and fo ur on the front pan el . NOTE: 1. Charging: the light shows amber when the battery is charging. NOTE: 2. Fully charged: light shows green when in AC mode. Icon Function Description Caps Lock Lights when Caps Lock is activated. Nu[...]

12 T ravelMate 4060 Easy-Launch Buttons Located at the upper-right, a bove the keyboard are four buttons. These bu ttons are called la unch keys. They are mail, Web browser , Acer Empowering ke y “ “, and one user-programmable button. Press “ “ to run the Acer eManager. The mail and W eb buttons are pre-set ot email and interne t programs, [...]

Chapter 1 13 Using the keyboard The keyboard has full-sized keys and an embedd ed keypad, separate cursor keys, two Windows keys and twelve function keys. Lock keys and embedded numeric keyp ad The keyboard has three lock keys which yo u can toggle on and off. The embedded numeri c keypad functions like a desktop nume ric keypad. It is indicated by[...]

14 T ravelMate 4060 Hot Keys The computer employs hot keys or key combinations to access most of the computer ’s controls like screen contrast and brightness, volu me output and the BIOS Utility . T o activate hot keys, press and hold th e <Fn> key before pressing the other key in the hot key combination. Keys Description Windows logo key S[...]

Chapter 1 15 S pecial keys Y ou can locate the Euro symbol at the upper-center (for European ke yboard) and/or bott om-right (Chinese keyboard) of your keyboard. T o type: Fn- n Power Management Launches Power options. Fn- o Sleep Puts the computer in Sleep mode. Fn- p Display toggle Switches display output between the display screen, external moni[...]

16 T ravelMate 4060 The Euro symbol 1. Open a text editor or word processor. 2. Either directly press the <Euro> key at the bottom-right of the keyboard (for Chinese keyboard), or hold <Alt Gr> and then press the <5> key at the upper-center of the ke yboard.symbol at the upper-center of the keyboard (for European keyb oard, you ca[...]

Chapter 1 17 T ouchpad The built-in touchpad is a pointing device that senses movement on its surface. This means the cursor responds as you move your finger on the surface of the touchpad. The cen tral location on the palmrest provides optimum comfort and suuport. T ouchpad basics The following items teach you how to use the touc hpad: * Move your[...]

18 T ravelMate 4060 Hardware Specifications and Configurations System Board Major Chip Item Controller System core logic Intel ® 915GM+ICH6-M Memory controller Integrated in Intel ® 915GM Audio controller RealT ek ALC260 HD audio interface (Audio amplifer: Maxiam MAX9755) PCMCIA controller for socket TI PCI1510A Video controller built-in Intel ®[...]

Chapter 1 19 Above table list s some system memory configurations. Y o u may combine DIMMs with various capacities to form other combinations. Cache scheme control Fixed-in write back System Memory Item Specification Memory controller built-in CPU Onboard memory size 0MB DIMM socket number 2 Sockets Supports memory size per socket 256MB(min)/1024MB[...]

20 T ravelMate 4060 . Modem Interface Item Specification Chipset CS1037 Internal Agere Scorpio chipset (Scorpio+CSP1037B) Fax modem data baud rate (bps) 14.4 K Data modem data baud rate (bps) 56K Supports modem protocol V .92MDC Modem connector type RJ1 1 Modem connector location Right side Wireless Module 802.1 1b/g (optional device) Item S pecifi[...]

Chapter 1 21 Physical read/write heads 3/3/4 4/3/2 4 Disks 2/2/4 2/2/4 2 S pindle speed (R PM) 4200RPM 4200RPM 4200R PM Performance S pecifications Buffer size 8MByt es (8192kbyte s) 8MBytes (8192kbytes) 8MBytes I n t e r f a c e ATA - 6 ATA / ATA P I - 6 ATA / ATA P I - 6 Data transfer , rate (host~buffer , Mbytes/ s) 100 MB/Sec 100 MB/Sec 100 MB/[...]

22 T ravelMate 4060 Format compatibility CD CD-DA (Red Book) - S tandard Audio CD & CD-TEXT CD-ROM (Y ellow Book Mode1 & 2) - S tandard Data CD-ROM XA (Mode2 Form1 & 2) - Photo CD, Multi-Session CD-I /FMV (Green Book, Mode2 Form1 & 2, Ready , Bridge) CD-Extra/ CD-Plus ( Blue B ook) - Audio & T ext/Video Video-CD (White Book) - M[...]

Chapter 1 23 Loading mechanism Load: Manual Release: (a) Electrical Release ( Release Button) (b) Release by A T API command (c) Emergency Release Power Requirement Input V oltage 5 V +/- 5 % (Operating) Audio Interface Item Specification Audio Controller Realtek ALC260 (Audio amplifier: Maxim MAX9755) Audio onboard or optional Built-in Mono or S t[...]

24 T ravelMate 4060 Resolution, colors and maximum refersh ra te (Hz) in 256, 65K or 16.7M colors. NOTE: 16:9 aspect ratio monitors are sup ported on 192 0x1080 an d 848x480 on Windo ws(R)XP , Windows(R) 2000 and Windows(R)ME. The complete li st of reso lutions dep ends on the driver version and operati ng system. NOTE: resolutions are limited by t[...]

Chapter 1 25 Package configuration 4S2P for Sanyo and Panasonic 4S1P for Sanyo QC141,SIMPPLO and SONY Package voltage 41.8V / 9.6V LCD Item S pecification V endor & model name AU B154EW01-08 QDI QD15TL02-03 Screen Diagonal (mm) 15.4inch 15.4inch Active Area (mm) 331 .2(H)x207.0(V) 331.2(H)x207.0(V) Display resolution (pixels) WXGA (1280x800) WX[...]

26 T ravelMate 4060 Efficiency It should provide an efficiency of 83% minimum, when measured at maximum load under 1 15V ac. Output Ratings (CV mode) DC output voltage 19V Noise + Ripple 300mVp-pmax (20 MHz bandwidth) Load 0(min) 3.16A(max) Output Ratings (CC mode) DC output voltage 19V +/-1.0V for CV mode Constant current mode 3.6 +/- 0 .3A Dynami[...]

Chapter 1 27 Environmental Requirements Item Specification T emperature Operating +0~+35 ° C Non-operating -20~+65 ° C Package storage -20~+65 ° C Humidity Operating 10% to 90% RH, non-condensing Non-operating 10% to 90% RH, non-condensing (Unpacked) Non-operating 10% to 90% RH, non-condensing (Storage package) Vibr ati on Operating (unpacked) O[...]

Chapter 2 28 BIOS Setup Utility The BIOS Setup Utility is a hardware configuration prog ram built into y our computer ’s BIOS (Basic Input/ Output System). Y our computer is already properly configu red and optimi zed, and you do not need to run this utility . However , if you encounter configuration problems, you may need to run Setup. Please al[...]

29 Chapter 2 Navigating the BIOS Utility There are six menu options: Info., Main, Sy stem Devices, Security , Boot, and Exit. Follow these instructio ns: T T o choose a menu, use the cursor left/right keys ( zx ). T T o choose a parameter , use the cursor up/down keys ( wy ). T T o change th e value of a parameter , press p or q . T A plus sign (+)[...]

Chapter 2 30 Information NOTE: The system information is su bject to diff erent models. Parameter Description HDD Model Name T his field shows the model name of HDD installed on primary IDE master . HDD Serial Number This field displays the seri al number of HDD installed on primary IDE master . A T API Device This field displays the mofel name of [...]

31 Chapter 2 UUID Number This will be visible only when ther e is an int ernal LAN device present. UUID means Universally Unique ID, a method for computing ob ject identifiers (OIDs). It uses the serial number in the local Ethernet card combined with the date and tim e to generate a 128 bit (16bytes) number . For Acer product, this fiel d displays [...]

Chapter 2 32 Main The Main screen disp lays a summary of your computer hardware information, and also inclu des basic setup parameters. It allows the user to specif y st andard IBM PC A T system parameters. NOTE: The screen above is for reference only . Actual values may differ . PhoenixBIOS Setup Utility Information Main S e c u r i t y B o o t E [...]

33 Chapter 2 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: The sub-items under each device wil l not be shown if t he device control is set to d isable or auto. This is because the user is not allowed to control the settings in these cases. Parameter Description[...]

Chapter 2 34 Security The Security screen co ntains parameters that help sa feguard and protect your co mpu ter from unauthorized use. PhoenixBIOS Setup Utility Information M a i n Boot Item Specific Help Supervisor Password Is : User Password Is : Clear Set Supervisor Password Set User Password Set HDD Password Password on Boot [Disabled] Supervis[...]

35 Chapter 2 The table below describes the parameters in this screen. Settings in boldface are the default and suggested parameter settings. NOTE: When you are prompted to enter a password, you ha ve three tries be fore the system halts. Don’t forget your password. If you forget your p assword, you ma y have to return your notebo ok computer to y[...]

Chapter 2 36 2. T ype a password in the “Enter New Passw ord” field. The password length can not exceeds 8 alphanumeric characters (A-Z, a-z, 0-9, not case sensi tive). Retype the password in the “Confirm New Password” field. IMPORT ANT : Be very careful when typing your password bec ause the characters do not appea r on the screen. 3. Pres[...]

37 Chapter 2 3. T ype a password in the Enter New Password field. Retype the password in the Confirm New Password field. 4. Press e . After setting the p assword, the comput er sets the Us er Password parameter to “Set”. 5. If desired, you can enable the Password on boot parameter . 6. When you are done, press u to save the cha nges and exit th[...]

Chapter 2 38 Boot This menu allows the user to deci de the order of boot de vices to load the operatin g system. Bootable devices includes the distette drive in m odule bay , the onboard hard disk drive an d the CD-ROM in module bay . PhoenixBIOS Setup Utility Info. M a i n A d v a n c e d S e c u r i t y E x i t Item Specific Help Floppy Devices +[...]

39 Chapter 2 Exit The Exit screen contains parameters that help safegua rd and protect your computer from unauthorized use. The table below describes the parameters in this screen. Parameter Description Exit Saving Changes Exit System Setup and save your changes to CMOS. Exit Discarding Changes Exit ut ility without saving setup data to CMOS. Load [...]

Chapter 2 40 BIOS Flash Utility The BIOS flash memory upd ate is required for th e following conditions: T New versions of system programs T New features or options T Restore a BIOS when it becomes corrupted. Use the Phlash util ity to update the system BIOS flash ROM. NOTE: If you do not have a crisis recovery diskette at hand, then you should cre[...]

41 Chapter 2[...]

Chapter 3 42 This chapter contains step-by-s tep procedures on how to disass emble the notebook computer for maintenance and troubleshooting . T o disassemble th e computer , you ne ed the following tool s: T Wrist grounding strap and conductive mat for preventing electrostatic discharge T Flat-bladed screw driver T Phillips screw driver T Tw e e z[...]

43 Chapter 3 General Information Before Y ou Begin Before proceeding with the disassembly procedure, make su re that you do the following: 1. T urn off the power to the system and all peripherals. 2. Unplug the AC adapter and all power and signal cab les from the system . NOTE: Aspire 9100 serie s product uses mylar or tape to fa sten the FFC/FPC/c[...]

Chapter 3 44 Disassembly Pro cedure Flowchart The flowchart on the succeed ing page gives you a graphic represen tation on the entire disassembly sequen ce and instructs you on the components that need to be remo ved during servicing . For example, if you want to remove the main board, you must first remove the ke yboard , then disassemble the insi[...]

45 Chapter 3 Screw List Item Description A SCREW F040 9 5.0X5.0 9.5X(IO) R0 0 B SCREW M2.0X0.4P+3FP ZK(NL) C SCREW M2.5 K 5/2 X0.85 4 ZK(NL) D SCREW M2.5X0.45+10K NIL E SCREW M2.5X0.45+8K ZBL F SCREW M2.5X0.45P+3F NI G SCREW M3.0X0.8P+3K NL 4 screw pads M*4 LCD Bezel *6 hinges *2 brackets LCD Inverter LCD Assembly LCD Cover *4 LCD Module LCD LCD Ca[...]

Chapter 3 46 Removing the Battery Pack 1. Unlock the battery lock. 2. Slide the battery latch as shown. 3. Then remove the battery pack.[...]

47 Chapter 3 Removing the HDD Module/the Me mory and the Wireless LAN Card/ the Thermal Module and the CP U/ODD Module and LCD Module Removing the HDD Module 1. Remove the two screws holding the HDD cover . 2. Remove the HDD cover . 3. Remove the screw fastening the HDD module to the notebook. 4. Then detach the HDD module from the notebook. Removi[...]

Chapter 3 48 . Removing the Thermal Module and CPU 1. Remove the three screws hol ding the thermal door 2. Detach the thermal door . 3. Disconnect the fan cable from the main board. 4. Remove the three screws fastening the thermal module. 5. Disconnect the fan cable. NOTE: When you remove th e screws fastening the thermal module, please follow the [...]

49 Chapter 3 Removing the ODD Module 1. Remove the three screws holding the middle cover . 2. Detach the middle cover carefully . 3. Then remove the two screws fastening the keyboard. 4. T urn over the keyboard as shown. 5. Disconnect the keyboard cable from the main board then remove th e keyboard. 6. Remove the screw that fastens the ODD module. [...]

Chapter 3 50 3. Remove the two screws that se cure the keyboard as shown. 4. T urn over the keyboard as shown and disconnec t the keyboard cable th en remove the keyboa rd. 5. Pull out the anten na set with a twee zers then take out the antenna set from the main unit. . 6. Disconnect the LCD coaxial cab le. 7. Remove the four screws holding the rig[...]

51 Chapter 3 Disassembling the Main Unit Sep arate the Main Unit Into the Upper and the Lower Case Assembly 1. Remove the two screws holding the switch board. 2. Remove the switch board. 3. Disconnect the touchpad FFC from the main board. 4. Disconnect the bluetooth cable. 5. Remove the five screws that secure the upper case. 6. Remove the 17 screw[...]

Chapter 3 52 4. Remove the three screws that secure the touchpad board. 5. Remove the touchpad board from the upper case. 6. Disconnect the touchpad board to touch pad FFC. 7. Remove the touchpad board to touchpad FFC from the uppwer case assembly . 8. Remove the four screws holding the touchpad bracket. 9. Detach the touchpad bracket from the uppe[...]

53 Chapter 3 2. Detach the MDC cable from the main board. 3. Remove the two screws holding the modem board then discon nect the modem board from the main board. 4. Disconnect the speaker cable from the main board . 5. Remove the screw that secu re the main board. 6. Remove the two screw n uts as shown. 7. The you can detach the main board from the [...]

Chapter 3 54 IMPORT ANT : When assemb ling/disassembling the main board, whenever there is a mylar on the main board (see the highlighted with red below; the mylar is sa mi-transparent, film-like stuff ), it should be transferred “if necessary” to the replacement main board. Because th e main board mylar should be stuck to the main board to pre[...]

55 Chapter 3 Disassembling the LCD Module 1. Remove the four screw caps as shown. 2. Remove the four screws holding the LCD bezel. 3. Then detach the LCD bezel from the LCD module. 4. Disconnect the inverter board then remove it. 5. Remove the three screws holding the right hinge. 6. Then remove the three screws that secure the left hinge. 7. Remov[...]

Chapter 3 56 13. Remove the left bracket as the picture shows. 14. T ear off the tape fastening the LCD cable. 15. T ear off the the LCD cable fastening the LCD cable, then remove it..[...]

57 Chapter 3 Disassembling the External Modules Disassembling the HDD Module 1. Remove the two screws holding the HDD bracket on one side. 2. Remove another two screws holding th e HDD bracket on the other side. 3. Then take the hard disc drive out from the HDD bracket. Disassembling the Opti cal Drive Module 1. Remove the four screws a s the pictu[...]

Chapter 4 58 Use the following procedure as a gui de for computer problems. NOTE: The diagnosti c tests are intended to test only Acer products. Non-Acer products, prototype cards, or modified options can give false e rrors and invalid system responses. 1. Obtain the failing symptoms in as much detail as possible. 2. V erify the symptoms by attempt[...]

59 Chapter 4 System Check Procedures External Diskette Drive Check Do the following to isolate the problem to a controller, dr iver , or diskette. A write-ena bled, diagnostic diskette is required. NOTE: Make sure that the diskette does not have more than on e label attached to it. Multiple labels can cause damage to the dri ve or cause the drive t[...]

Chapter 4 60 Memory check Memory errors might stop system operations, show error messages on the screen, or hang the system. 1. Boot from the diagnostics diskette and start the doa gmpstotics prog ram (please refer to mai n board. 2. Go to the dia gnostic memory in the test items. 3. Press F2 in the test items. 4. Follow the instruction s in the me[...]

61 Chapter 4 Check the Power Adapt er Unplug the power adapter cable from the computer and measure the output voltage at the plug of the power adapter cable. See the following figu re 1. If the voltage is not correct , replace the power ad apter . 2. If the voltage is within the range, do the following: T Replace the System board. T If the problem [...]

Chapter 4 62 Check the Battery Pack T o check the battery pack, do the following: From Software: 1. Check out the Power Management in control Panel 2. In Power Mete r , conf irm that if t he parameters sh own in the screen for Current Power Source and T otal Battery Power Remaining are correct. 3. Repeat the steps 1 and 2, fo r both battery and ada[...]

63 Chapter 4 Power-On Self-T est (POST) Error Message The POST error message index lists the error message and their possible causes. The most like ly cause is listed first. NOTE: Perform the FRU replacement or actions in the s equence shown in FRU/Action column, if the FRU replacement does not solve the proble m, put the ori ginal part back in the[...]

Chapter 4 64 Index of Error Messages Error Code List Error Codes Error Messages 006 Equipment Configuration Error Causes: 1. CPU BIOS Update Code Mismatch 2. IDE Primary Channel Master Drive Err or (THe causes will be shown before “Equipment Configuration Error”) 010 Memory Error at xxxx:xxxx:xxxx h (R:xxxxh, W:xx xxh) 070 Real T ime Clock Erro[...]

65 Chapter 4 Real time clock error RTC battery Run BIOS Setup Utility to reconfigure system time, then reboot system. System board Previous boot incomplete - Default configuration used Run “Load Default Settings” in BIOS Setup Utility . RTC battery System board Memory size found by POST differed from CMOS Run “Load Default Settings” in BIOS[...]

Chapter 4 66 Error Message List No beep Error Messages FRU/Action in Sequence No beep, power-on indicator turns off and LCD is blank. Power source (battery pack and power adapter). See “Power System Check” on page 60. Ensure every connector is connected tig htly and correctly . Reconnect the DIMM. LED board. System board. No beep, power-on indi[...]

67 Chapter 4 Phoenix BIOS Beep Codes Code Beeps POST Routine Description 02h V erify R eal Mode 03h Disable Non-Maskable Interru pt (NMI) 04h Get CPU type 06h Initialize system hardware 08h Initialize chipset with i nitial POST values 09h Set IN POST flag 0Ah Initialize CPU registers 0Bh Enable CPU cache 0Ch Initialize caches to initial POST values[...]

Chapter 4 68 48h Check video configuration against CMOS 49h Initialize PCI bus and devices 4Ah Initialize all video adapters in system 4Bh QuietBoot start (optional) 4Ch Shadow video BIOS ROM 4Eh Display BIOS copyright notice 50h Display CPU type and speed 51h Initialize EISA board 52h T est keyboard 54h Set key click if enabled 58h 2-2-3-1 T est f[...]

69 Chapter 4 8Fh Determine number of A T A drives (optional) 90h Initialize hard-disk controllers 91h Initialize local-bus hard-disk controllers 92h Jump to UserPatch2 93h Build MPT ABLE for multi-processor b oards 95h Install CD ROM for boot 96h Clear huge ES segment register 97h Fixup Multi Processor table 98h 1-2 Search for option ROMs. One long[...]

Chapter 4 70 Code Beeps E0h Initialize the chipset E1h Initialize the bridge E2h Initialize the CPU E3h Initialize the system timer E4h Initialize system I/O E5h Check force recovery boot E6h Checksum BIOS ROM E7h Go to BIOS E8h Set Huge Segment E9h Initialize Mu lti Processor EAh Initialize OEM special code EBh Initialize PIC and DMA ECh Initializ[...]

71 Chapter 4 Index of Symptom-to -FRU Error Message LCD-Related Symptoms Symptom / Error Action in Sequence LCD backlight doesn't work LCD is too dark LCD brightness cannot be adjusted LCD contrast cannot be adjusted Enter BIOS Utility to execute “Load Setup Default Settings”, the n reboot system. Reconnect the LCD connectors. Keyboard (if[...]

Chapter 4 72 PCMCIA-Related Symptom s Symptom / Error Action in Sequence System cannot detect the PC Card (PCMCIA) PCMCIA slot assembly System board PCMCIA slot pin is damaged. PCMCIA slot assembly Memory-Related Symptoms Symptom / Error Action in Sequence Memory count (size) appears different from actual size. Enter BIOS Setup Utility to execute ?[...]

73 Chapter 4 NOTE: If you cannot find a symptom or an error in this list and the problem remains, see “Undete rmined Problems” on page 75. System hangs intermittently . Reconnect hard disk/CD-ROM drive s. Hard disk connection board System board Peripheral-Related Symptom s Symptom / Error Action in Sequence System configuration does not match t[...]

Chapter 4 74 Intermittent Problems Intermittent system hang problems can be caused by a variety of reasons th at have nothing to do with a hardware defect, such as: cosmic radiation, electros tatic discharge, or software errors. FRU replacement should be considered only when a recurring prob lem exists. When analyzing an intermittent prob lem, do t[...]

75 Chapter 4 Undetermined Problems The diagnostic proble ms does not identify wh ich adapter or device failed, which in stalled devices are incorrect, whether a short circuit is suspected, or whether the system is inoperative. Follow these procedure s to isolate the fail i ng FRU (do not isolate non-defective FRU). NOTE: V erify that all attached d[...]

Chapter 6 76 This chapter gives you the FRU (Field Replaceable Unit) listing in global configura tions of T ravelMate 4060. Refer to this chapter whenever orderi ng for parts to repair or for RMA (Return Merchandise Authorization). Please note that WHEN ORDE RING FRU P ARTS, you shou ld check the most up-to-date information avai lable on your regio[...]

77 Chapter 6 T ravelMate 4060 Exploded Diagram T ravelMate 4060 FRU List Adapter NS ADP 19V 3.42A P A-1650-02QR 90~264V LF AP .06503.010 NS ADP 19V 3.42A SLS0335 A19A57LF 90~264V EU AP .06506.002 NS ADP 19V 3.42A SADP-65KB DBHF 90~264V LF AP .06501.009 Battery[...]

Chapter 6 78 NS BA TTERY SANYO LI-ION 4S2P 4.4A 4UR18650F-2-QC140 BT .T5003.001 BA TTERY P ANASONIC LI-ION 4S2P 4.4A CGR-B/8B5AE BT .T5005.001 BA TTERY P ANASONIC LI-ION 4S2P 4.4A ROHS BT .00805.003 BA TTERY SIMPPLO P ACK LI-ION 4S1P 2.0A BT .00407.001 BA TTERY SANYO P ACK LI-ION 4S1P 2.0A BT .00403.004 BA TTERY SONY P ACK LI-ION 4S1P 1.96A BT .004[...]

79 Chapter 6 NS MODEM CABLE 50.A510V7.001 NS POWER CORD U S (3 PIN) 27.A03V7.00 1 POWER CORD PRC (3 PIN) 27.A03V7.003 POWER CORD KOERA ( Pin) 27.T23V7.006 POWER CORD EU (3 PIN) 27.A03V7.002 POWER CORD U K (3 PIN) 27.A03V7.00 4 POWER CORD IT ALIAN (3 PIN ) 27.A03V7.005 POWER CORD- SWISS 27.A03V7.007 POWER CORD AU (3 PIN) 27.A03V7.008 POWER CORD DANI[...]

Chapter 6 80 NS 3 IN 1 DUMMY COVER 42.T51V7.003 15 HDD COVER 42.T63V7.004 14 HDD BRACKET 33.T50V7.001 Communication Module NS WIRELESS LAN ANTENNA 50.T50V7.003 CPU/Processor NS AMD MOBILE SEMPRON 2800+ 25WD KC.S2802.25D AMD MOBILE SEMPRON 3000+ 25WD KC.S3002.25D AMD MOBILE TURION 64 ML28 KC.TML02.280 AMD MOBILE TURION 64 ML30 KC.TML02.300 AMD MOBIL[...]

81 Chapter 6 NS DVD/CDRW COMBO DRIVE 24X PHILIPS SCB5265 GB LF KO.02403.007 NS OPTICAL DEVICE HOLDER-FIX 42.T51V7.003 NS DVD/CDRW BEZEL FOR G BASE 42.A65V7.003 DVD/CDRW COMBO MODULE KME UJDA-770 6M.T AGV7.002 DVD/CDRW COMBO DRIVE 24X KME UJDA-770 KO.02406.013 OPTICAL DEVICE HOLDER-FIX 42.T51V7.003 DVD/CDRW BEZEL FOR G BASE 42.A65V7.003 DVD/CDRW COM[...]

Chapter 6 82 DVD DUAL DRIVE LIET -ON SOSW- 833 DL G BASE KU.00804.012 OPTICAL DEVICE HOLDER-FIX 42.T51V7.003 DVD DUAL BEZEL G BASE 42.A51V7.005 DVD DUAL MODULE PIONEER DVR- K15RA F/W:1.05 G BASE 6M.A TKV7.003 DVD DUAL DRIVEPIONEER DVR- K15RA D. LA YER F/W:1.05 G BASE KU.00805.020 OPTICAL DEVICE HOLDER-FIX 42.T51V7.003 DVD DUAL BEZEL G BASE 42.A51V7[...]

83 Chapter 6 80G HGST 2.5 IN. 4200RPM HAKONE-A F/W:A70G KH.08007.01 1 80G WD 2.5 IN. 5400RPM ML40 WD800UE-22HCT0 (ROHS) KH.08008.027 100G TOSHIBA 2.5 IN. 4200RPM ARES MK1031GAS (ROHS) F/W AA204A KH.10004.001 100G HGST 2.5 IN. 4200RPM HAKONE-A F/W:A70G KH.10007.002 Keyboard NS AS1680/AS1410 KEYBOARD DARFON US International KB.A2707.001 AS1680/AS1410[...]

Chapter 6 84 AS1680/AS1410 KEYBOARD DARFON Canadian French KB.A2707.021 AS1680/AS1410 KEYBOARD DARFON Japanese KB.A2707.022 AS1680/AS1410 KEYBOARD DARFON Greek KB.A2707.023 AS1680/AS1410 KEYBOARD DARFON Hebrew KB.A2707.024 AS1680/AS1410 KEYBOARD DARFON Russian KB.A2707.025 LCD Module NS LCD 15.0 IN. MODULE SAMSUNG L TN150XB-L03-V LF 6M.A TKV7.01 1 [...]

85 Chapter 6 NS LCD BR ACKET W/HINGE 15 IN. - R 33.T50V7.003 NS LCD P ANEL W/LOGO ANTENNA 14/ 15 IN. 60.T50V7.102 NS LCD BEZEL W/RUBBER P AD 15 IN. 60.T50V7.004 LCD 15.0 IN. MODULE CMO N150X3- L07 LF 6M.A TKV7.012 LCD 15.0 IN. XGA CMO N150X3-L07 REV C4 LF LK.1500D.012 NS LCD INVERTER BOARD 19.T AKV7.001 NS LCD CABL E - 15 IN. XGA 50.T50V7.004 NS LC[...]

Chapter 6 86 LCD 15.0 IN. XGA LPL LP150X07- TLA2 LF LK.15008.019 LCD INVERTER BOARD 19.T AKV7.001 LCD CABL E - 15 IN. XGA 50.T50V7.004 LCD BRACKET W/HINGE 15 IN. - L 33.T50V7.002 LCD BRACKET W/HINGE 15 IN. - R 33.T50V7.003 LCD P ANEL W/LOGO ANTENNA 14/ 15 IN. 60.T50V7.102 LCD BEZEL W/RUBBER P AD 15 IN. 60.T50V7.004 NS LCD MODULE 15.4 IN. WXGA CMO N[...]

87 Chapter 6 LCD 15.4 IN. WXGA AU B154EW01 V8 LF NON- G LK.15405.005 LCD INVERTER BOARD 19.T AKV7.001 LCD CABLE - 15.4 IN. WXGA 50.T50V7.006 LCD BRACKET W/HINGE 15.4 IN. - L 33.T50V7.004 LCD BRACKET W/HINGE 15.4 IN. - R 33.T50V7.005 LCD P ANEL W/LOGO ANTENNA 15.4 IN. 60.T50V7.103 LCD BEZEL W/RUBBER P AD 15.4 IN. 60.T50V7.006 LCD 15.0 IN. MODULE SAM[...]

Chapter 6 88 LCD 15.4 WXGA QDI QD15TL02-03 LF NON-GL ARE LK.15409.004 LCD INVERTER BOARD 19.T AKV7.001 LCD CABLE - 15.4 IN. WXGA 50.T50V7.006 LCD BRACKET W/HINGE 15.4 IN. - L 33.T50V7.004 LCD BRACKET W/HINGE 15.4 IN. - R 33.T50V7.005 LCD P ANEL W/LOGO ANTENNA 15.4 IN. 60.T56V7.103 LCD BEZEL W/RUBBER P AD 15.4 IN. 60.T50V7.006 LCD 15.4 IN. MODULE AU[...]

89 Chapter 6 N/S SPEAKER SET 23.T50V7.001 Heatsink 10 THERMAL MODULE 60.A51V7.005 Miscellaneous NS NAME PLA TE - TM4060 1HYXZZZ24H9 NS RUBBER FOOT 1HYXZZZ24D6 NS LCD SCREW RUBBER P AD 47.T50V7.003 NS LCD BEZEL RUBBER P A D 47.T50V7.004 Screw NS SCREW M2.0X3.0- I-NI-NYLOK 86.A03V7.012 NS SCREW I2.5*3M- BNIH(M2.5L3) 86.T25V7.012 NS SCREW M2.5*4L- BZN[...]

Chapter 6 90[...]